1 files changed, 0 insertions, 204 deletions
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr42.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
deleted file mode 100644
index ccf2554ca3..0000000000
--- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq8068-cryptid-common.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Meraki MR42";
-	compatible = "meraki,mr42", "qcom,ipq8064";
-
-	aliases {
-		serial1 = &gsbi1_serial;
-		ethernet0 = &gmac3;
-
-		led-boot = &led_active;
-		led-failsafe = &led_power;
-		led-running = &led_active;
-		led-upgrade = &led_active;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-			debounce-interval = <60>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		led_power: power {
-			label = "orange:power";
-			gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_active: active {
-			label = "white:active";
-			gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&gmac3 {
-	status = "okay";
-
-	qcom,id = <3>;
-	mdiobus = <&mdio0>;
-
-	phy-mode = "sgmii";
-	phy-handle = <&phy2>;
-
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gsbi2 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C>;
-};
-
-&gsbi2_i2c {
-	status = "okay";
-
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	ina2xx@40 {
-		compatible = "ina219";
-		shunt-resistor = <40000>;
-		reg = <0x40>;
-	};
-
-	eeprom@56 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x56>;
-		read-only;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		mac_address: mac-address@66 {
-			reg = <0x66 0x6>;
-		};
-	};
-};
-
-&gsbi6 {
-	qcom,mode = <GSBI_PROT_I2C>;
-	status = "okay";
-};
-
-&gsbi6_i2c {
-	status = "okay";
-
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-
-	tlc591xx@40 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "ti,tlc59108";
-		reg = <0x40>;
-
-		red@0 {
-			label = "red:user";
-			reg = <0x0>;
-		};
-
-		green@1 {
-			label = "green:user";
-			reg = <0x1>;
-		};
-
-		blue@2 {
-			label = "blue:user";
-			reg = <0x2>;
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
-	pinctrl-names = "default";
-
-	phy2: ethernet-phy2 {
-		reg = <2>;
-
-		reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <24000>;
-
-		eee-broken-100tx;
-		eee-broken-1000t;
-	};
-};
-
-&qcom_pinmux {
-	i2c0_pins: i2c0_pins {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gsbi2";
-			drive-strength = <2>;
-			bias-pull-up;
-			input;
-		};
-	};
-
-	button_pins: button_pins {
-		mux {
-			pins = "gpio26";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	i2c1_pins: i2c1_pins {
-		mux {
-			pins = "gpio29", "gpio30";
-			function = "gsbi6";
-			drive-strength = <2>;
-			bias-pull-up;
-			input;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio31", "gpio32";
-			function = "gpio";
-			drive-strength = <12>;
-			bias-pull-down;
-			output-low;
-		};
-	};
-};
-
-&wifi0 {
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <1>;
-};
-
-&wifi1 {
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <2>;
-};
-
-&wifi2 {
-	nvmem-cells = <&mac_address>;
-	nvmem-cell-names = "mac-address";
-	mac-address-increment = <3>;
-};