1 files changed, 0 insertions, 145 deletions
diff --git a/target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch b/target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch
deleted file mode 100644
index 747fa8c019..0000000000
--- a/target/linux/ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch
+++ /dev/null
@@ -1,145 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
-@@ -24,73 +24,6 @@
- 		device_type = "memory";
- 	};
- 
--	mdio0: mdio-0 {
--		status = "okay";
--		compatible = "virtual,mdio-gpio";
--		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
--			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
--		#address-cells = <1>;
--		#size-cells = <0>;
--
--		pinctrl-0 = <&mdio0_pins>;
--		pinctrl-names = "default";
--
--		switch0: switch@10 {
--			compatible = "qca,qca8337";
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			dsa,member = <0 0>;
--
--			pinctrl-0 = <&sw0_reset_pin>;
--			pinctrl-names = "default";
--
--			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
--			reg = <0x10>;
--
--			ports {
--				#address-cells = <1>;
--				#size-cells = <0>;
--
--				switch0cpu: port@0 {
--					reg = <0>;
--					label = "cpu";
--					ethernet = <&gmac0>;
--					phy-mode = "rgmii-id";
--					fixed-link {
--						speed = <1000>;
--						full-duplex;
--					};
--				};
--
--				port@1 {
--					reg = <1>;
--					label = "sw1";
--				};
--
--				port@2 {
--					reg = <2>;
--					label = "sw2";
--				};
--
--				port@3 {
--					reg = <3>;
--					label = "sw3";
--				};
--
--				port@4 {
--					reg = <4>;
--					label = "sw4";
--				};
--
--				port@5 {
--					reg = <5>;
--					label = "sw5";
--				};
--			};
--		};
--	};
--
- 	mdio1: mdio-1 {
- 		status = "okay";
- 		compatible = "virtual,mdio-gpio";
-@@ -216,6 +149,68 @@
- 	};
- };
- 
-+&mdio0 {
-+	status = "okay";
-+
-+	pinctrl-0 = <&mdio0_pins>;
-+	pinctrl-names = "default";
-+
-+	switch0: switch@10 {
-+		compatible = "qca,qca8337";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		dsa,member = <0 0>;
-+
-+		pinctrl-0 = <&sw0_reset_pin>;
-+		pinctrl-names = "default";
-+
-+		reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-+		reg = <0x10>;
-+
-+		ports {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			switch0cpu: port@0 {
-+				reg = <0>;
-+				label = "cpu";
-+				ethernet = <&gmac0>;
-+				phy-mode = "rgmii-id";
-+				fixed-link {
-+					speed = <1000>;
-+					full-duplex;
-+				};
-+			};
-+
-+			port@1 {
-+				reg = <1>;
-+				label = "sw1";
-+			};
-+
-+			port@2 {
-+				reg = <2>;
-+				label = "sw2";
-+			};
-+
-+			port@3 {
-+				reg = <3>;
-+				label = "sw3";
-+			};
-+
-+			port@4 {
-+				reg = <4>;
-+				label = "sw4";
-+			};
-+
-+			port@5 {
-+				reg = <5>;
-+				label = "sw5";
-+			};
-+		};
-+	};
-+};
-+
- &gmac0 {
- 	status = "okay";
-