diff options
Diffstat (limited to 'target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts')
| -rw-r--r-- | target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts | 303 |
1 files changed, 0 insertions, 303 deletions
diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts deleted file mode 100644 index 9ff73382b3..0000000000 --- a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Ctera C200 V1 Board Description - * Copyright 2021 Pawel Dembicki <paweldembicki@gmail.com> - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Ctera C200 V1"; - compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_red; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; - }; - - reset { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; - - usb1 { - label = "USB1 Button"; - linux,code = <BTN_0>; - gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; - }; - - usb2 { - label = "USB2 Button"; - linux,code = <BTN_1>; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_poweroff>; - pinctrl-names = "default"; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_leds>; - pinctrl-names = "default"; - - led_status_green: status-green { - label = "green:status"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - - led_status_red: status-red { - label = "red:status"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - cloud-blue { - label = "blue:cloud"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - }; - - disk1-green { - label = "green:disk1"; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata1"; - }; - - disk1-red { - label = "red:disk1"; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - }; - - disk2-green { - label = "green:disk2"; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata2"; - }; - - disk2-red { - label = "red:disk2"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - disk-fail-green { - label = "green:disk-fail"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - }; - - disk-fail-red { - label = "red:disk-fail"; - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - }; - - usb1-green { - label = "green:usb1"; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port2>; - }; - - usb1-red { - label = "red:usb1"; - gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - }; - - usb2-green { - label = "green:usb2"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port1>; - }; - - usb2-red { - label = "red:usb2"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - }; -}; - -ð0 { - status = "okay"; -}; - -ð0port { - phy-handle = <ðphy9>; -}; - -&i2c0 { - status = "okay"; - - rtc@30 { - compatible = "s35390a"; - reg = <0x30>; - }; - - lm63@4c { - compatible = "national,lm63"; - reg = <0x4c>; - }; -}; - -&mdio { - status = "okay"; - - ethphy9: ethernet-phy@9 { - reg = <9>; - }; -}; - -&nand { - status = "okay"; - chip-delay = <40>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x200000>; - }; - - partition@200000 { - label = "certificate"; - reg = <0x0200000 0x100000>; - }; - - partition@300000 { - label = "preset_cfg"; - reg = <0x0300000 0x100000>; - }; - - partition@400000 { - label = "dev_params"; - reg = <0x0400000 0x100000>; - }; - partition@500000 { - label = "active_bank"; - reg = <0x0500000 0x0100000>; - }; - - partition@600000 { - label = "magic"; - reg = <0x0600000 0x0100000>; - }; - - partition@700000 { - label = "bank1"; - reg = <0x0700000 0x2800000>; - }; - - partition@2f00000 { - label = "bank2"; - reg = <0x2f00000 0x2800000>; - }; - - /* 0x5700000-0x5a00000 undefined in vendor firmware */ - - partition@5a00000 { - label = "reserved"; - reg = <0x5a00000 0x2000000>; - }; - - partition@7a00000 { - label = "ubi"; - reg = <0x7a00000 0x8600000>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pinctrl { - /* buzzer gpios are connected to two pins of buzzer - * leave it as is due lack of proper driver - */ - pmx_buzzer: pmx-buzzer { - marvell,pins = "mpp12", "mpp13"; - marvell,function = "gpio"; - }; - - pmx_leds: pmx-leds { - marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38", - "mpp39", "mpp40", "mpp42", "mpp43", "mpp44", - "mpp45", "mpp46", "mpp47"; - marvell,function = "gpio"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49"; - marvell,function = "gpio"; - }; - - pmx_poweroff: pmx-poweroff { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; -}; - -&rtc { - status = "disabled"; -}; - -&sata { - status = "okay"; - nr-ports = <2>; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - #trigger-source-cells = <0>; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - hub_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; -}; |