1 files changed, 0 insertions, 149 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi
deleted file mode 100644
index 5993c1b798..0000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	aliases {
-		led-boot = &led_sys;
-		led-failsafe = &led_sys;
-		led-running = &led_sys;
-		led-upgrade = &led_sys;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_disable_sys_led>;
-		compatible = "gpio-leds";
-
-		led_sys: sys {
-			label = "green:sys";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-
-		poe_enable {
-			gpio-hog;
-			gpios = <13 GPIO_ACTIVE_HIGH>;
-			output-high;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "u-boot-env";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-			partition@50000 {
-				label = "u-boot-env2";
-				reg = <0x50000 0x10000>;
-			};
-			partition@60000 {
-				label = "jffs";
-				reg = <0x60000 0x100000>;
-			};
-			partition@160000 {
-				label = "jffs2";
-				reg = <0x160000 0x100000>;
-			};
-			partition@b260000 {
-				label = "firmware";
-				reg = <0x260000 0x6d0000>;
-				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <0x83800000>;
-			};
-			partition@930000 {
-				label = "runtime2";
-				reg = <0x930000 0x6d0000>;
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};