1 files changed, 0 insertions, 102 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts
deleted file mode 100644
index 16934ede3b..0000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_d-link_dgs-1210_common.dtsi"
-
-/ {
-	compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
-	model = "D-Link DGS-1210-10P";
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		mode {
-			label = "mode";
-			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LIGHTS_TOGGLE>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 33 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		link_act {
-			label = "green:link_act";
-			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-		};
-
-		poe {
-			label = "green:poe";
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-		};
-
-		poe_max {
-			label = "yellow:poe_max";
-			gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-		INTERNAL_PHY(24)
-		INTERNAL_PHY(26)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-		SWITCH_SFP_PORT(24, 9, rgmii-id)
-		SWITCH_SFP_PORT(26, 10, rgmii-id)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};