summaryrefslogtreecommitdiff
path: root/target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts')
-rw-r--r--target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts197
1 files changed, 0 insertions, 197 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts b/target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts
deleted file mode 100644
index d19960c108..0000000000
--- a/target/linux/realtek/dts-5.10/rtl8382_iodata_bsh-g24mb.dts
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- compatible = "iodata,bsh-g24mb", "realtek,rtl838x-soc";
- model = "I-O DATA BSH-G24MB";
-
- aliases {
- led-boot = &led_sys_loop;
- led-failsafe = &led_sys_loop;
- led-upgrade = &led_sys_loop;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&pinmux_disable_sys_led>;
- compatible = "gpio-leds";
-
- led_sys_loop: led {
- label = "red:sys_loop";
- gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_STATUS;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio1: rtl8231-gpio {
- compatible = "realtek,rtl8231-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- indirect-access-bus-id = <0>;
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "u-boot-env";
- reg = <0x80000 0x10000>;
- read-only;
- };
-
- partition@90000 {
- label = "u-boot-env2";
- reg = <0x90000 0x10000>;
- };
-
- partition@a0000 {
- label = "jffs2_cfg";
- reg = <0xa0000 0x100000>;
- read-only;
- };
-
- partition@1a0000 {
- label = "jffs2_log";
- reg = <0x1a0000 0x100000>;
- read-only;
- };
-
- /*
- * use 2x OS partitions in OpenWrt
- *
- * 0x2A0000-0x94FFFF: RUNTIME
- * 0x950000-0xFFFFFF: RUNTIME2 (not used in stock)
- */
- partition@2a0000 {
- compatible = "openwrt,uimage", "denx,uimage";
- label = "firmware";
- reg = <0x2a0000 0xd60000>;
- openwrt,ih-magic = <0x83800013>;
- };
- };
- };
-};
-
-&ethernet0 {
- mdio-bus {
- compatible = "realtek,rtl838x-mdio";
- regmap = <&ethernet0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- EXTERNAL_PHY(0)
- EXTERNAL_PHY(1)
- EXTERNAL_PHY(2)
- EXTERNAL_PHY(3)
- EXTERNAL_PHY(4)
- EXTERNAL_PHY(5)
- EXTERNAL_PHY(6)
- EXTERNAL_PHY(7)
-
- INTERNAL_PHY(8)
- INTERNAL_PHY(9)
- INTERNAL_PHY(10)
- INTERNAL_PHY(11)
- INTERNAL_PHY(12)
- INTERNAL_PHY(13)
- INTERNAL_PHY(14)
- INTERNAL_PHY(15)
-
- EXTERNAL_PHY(16)
- EXTERNAL_PHY(17)
- EXTERNAL_PHY(18)
- EXTERNAL_PHY(19)
- EXTERNAL_PHY(20)
- EXTERNAL_PHY(21)
- EXTERNAL_PHY(22)
- EXTERNAL_PHY(23)
- };
-};
-
-&switch0 {
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- SWITCH_PORT(0, 1, qsgmii)
- SWITCH_PORT(1, 2, qsgmii)
- SWITCH_PORT(2, 3, qsgmii)
- SWITCH_PORT(3, 4, qsgmii)
- SWITCH_PORT(4, 5, qsgmii)
- SWITCH_PORT(5, 6, qsgmii)
- SWITCH_PORT(6, 7, qsgmii)
- SWITCH_PORT(7, 8, qsgmii)
-
- SWITCH_PORT(8, 9, internal)
- SWITCH_PORT(9, 10, internal)
- SWITCH_PORT(10, 11, internal)
- SWITCH_PORT(11, 12, internal)
- SWITCH_PORT(12, 13, internal)
- SWITCH_PORT(13, 14, internal)
- SWITCH_PORT(14, 15, internal)
- SWITCH_PORT(15, 16, internal)
-
- SWITCH_PORT(16, 17, qsgmii)
- SWITCH_PORT(17, 18, qsgmii)
- SWITCH_PORT(18, 19, qsgmii)
- SWITCH_PORT(19, 20, qsgmii)
- SWITCH_PORT(20, 21, qsgmii)
- SWITCH_PORT(21, 22, qsgmii)
- SWITCH_PORT(22, 23, qsgmii)
- SWITCH_PORT(23, 24, qsgmii)
-
- port@28 {
- ethernet = <&ethernet0>;
- reg = <28>;
- phy-mode = "internal";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-};