summaryrefslogtreecommitdiff
path: root/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts')
-rw-r--r--target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts422
1 files changed, 0 insertions, 422 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts b/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts
deleted file mode 100644
index b7300cfcbe..0000000000
--- a/target/linux/realtek/dts-5.10/rtl8393_tplink_sg2452p-v4.dts
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl839x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- compatible = "tplink,sg2452p-v4", "realtek,rtl8393-soc";
- model = "TP-Link SG2452P v4";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x10000000>;
- };
-
- aliases {
- led-boot = &led_sys;
- led-failsafe = &led_sys;
- led-running = &led_sys;
- led-upgrade = &led_sys;
- label-mac-device = &ethernet0;
- };
-
- chosen {
- bootargs = "console=ttyS0,38400";
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- speed {
- label = "speed";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-
- gpio_fan_sys {
- compatible = "gpio-fan";
- alarm-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- gpio_fan_psu_1 {
- pinctrl-names = "default";
- pinctrl-0 = <&disable_jtag>;
- compatible = "gpio-fan";
-
- alarm-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- /* the actual speeds (rpm) are unknown, just use dummy values */
- gpio-fan,speed-map = <1 0>, <2 1>;
- #cooling-cells = <2>;
- };
-
- gpio_fan_psu_2 {
- /* This fan runs in parallel to PSU1 fan, but has a separate
- * alarm GPIO. This is not (yet) supported by the gpio-fan driver,
- * so a separate instance is added
- */
- compatible = "gpio-fan";
- alarm-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- leds {
- pinctrl-names = "default";
- compatible = "gpio-leds";
-
- led-0 {
- label = "green:speed";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- };
-
- led-1 {
- label = "green:poe";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- };
-
- led_sys: led-2 {
- label = "green:sys";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-3 {
- label = "green:fan";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- };
-
- led-4 {
- label = "amber:fan";
- gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_AMBER>;
- function = "fault-fan";
- };
-
- led-5 {
- label = "green:poe-max";
- gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = "alarm-poe";
- };
- };
-
- i2c-gpio-0 {
- compatible = "i2c-gpio";
- sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* LAN9 - LAN12 */
- tps23861@5 {
- compatible = "ti,tps23861";
- reg = <0x05>;
- };
-
- /* LAN17 - LAN20 */
- tps23861@6 {
- compatible = "ti,tps23861";
- reg = <0x06>;
- };
-
- /* LAN45 - LAN48 */
- tps23861@9 {
- compatible = "ti,tps23861";
- reg = <0x09>;
- };
-
- /* LAN37 - LAN40 */
- tps23861@a {
- compatible = "ti,tps23861";
- reg = <0x0a>;
- };
-
- /* LAN1 - LAN4 */
- tps23861@14 {
- compatible = "ti,tps23861";
- reg = <0x14>;
- };
-
- /* LAN25 - LAN28 */
- tps23861@24 {
- compatible = "ti,tps23861";
- reg = <0x24>;
- };
-
- /* LAN33 - LAN 36 */
- tps23861@25 {
- compatible = "ti,tps23861";
- reg = <0x25>;
- };
-
- /* LAN41 - LAN44 */
- tps23861@26 {
- compatible = "ti,tps23861";
- reg = <0x26>;
- };
-
- /* LAN13 - LAN16 */
- tps23861@29 {
- compatible = "ti,tps23861";
- reg = <0x29>;
- };
-
- /* LAN29 - LAN32 */
- tps23861@2c {
- compatible = "ti,tps23861";
- reg = <0x2c>;
- };
-
- /* LAN5 - LAN8 */
- tps23861@48 {
- compatible = "ti,tps23861";
- reg = <0x48>;
- };
-
- /* LAN21 - LAN24 */
- tps23861@49 {
- compatible = "ti,tps23861";
- reg = <0x49>;
- };
- };
-
- gpio-restart {
- compatible = "gpio-restart";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-};
-
-&gpio0 {
- poe-enable {
- gpio-hog;
- gpios = <23 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "poe-enable";
- };
-};
-
-&spi0 {
- status = "okay";
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0xe0000>;
- read-only;
- };
- partition@e0000 {
- label = "u-boot-env";
- reg = <0xe0000 0x20000>;
- };
-
- /* We use the "sys", "usrimg1" and "usrimg2" partitions
- * as firmware since the kernel needs to be in "sys", but the
- * partition is too small to hold the "rootfs" as well.
- * The original partition map contains:
- *
- * partition@100000 {
- * label = "sys";
- * reg = <0x100000 0x600000>;
- * };
- * partition@700000 {
- * label = "usrimg1";
- * reg = <0x700000 0xa00000>;
- * };
- * partition@1100000 {
- * label = "usrimg2";
- * reg = <0x1100000 0xa00000>;
- * };
- */
-
- partition@100000 {
- label = "firmware";
- reg = <0x100000 0x1a00000>;
- };
- partition@1b00000 {
- label = "usrappfs";
- reg = <0x1b00000 0x400000>;
- };
- partition@1f00000 {
- compatible = "nvmem-cells";
- label = "para";
- reg = <0x1f00000 0x100000>;
- #address-cells = <1>;
- #size-cells = <1>;
- read-only;
-
- factory_macaddr: macaddr@fdff4 {
- reg = <0xfdff4 0x6>;
- };
- };
- };
- };
-};
-
-&ethernet0 {
- nvmem-cells = <&factory_macaddr>;
- nvmem-cell-names = "mac-address";
-
- mdio: mdio-bus {
- compatible = "realtek,rtl838x-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* External phy RTL8218B #1 */
- EXTERNAL_PHY(0)
- EXTERNAL_PHY(1)
- EXTERNAL_PHY(2)
- EXTERNAL_PHY(3)
- EXTERNAL_PHY(4)
- EXTERNAL_PHY(5)
- EXTERNAL_PHY(6)
- EXTERNAL_PHY(7)
-
- /* External phy RTL8218B #2 */
- EXTERNAL_PHY(8)
- EXTERNAL_PHY(9)
- EXTERNAL_PHY(10)
- EXTERNAL_PHY(11)
- EXTERNAL_PHY(12)
- EXTERNAL_PHY(13)
- EXTERNAL_PHY(14)
- EXTERNAL_PHY(15)
-
- /* External phy RTL8218B #3 */
- EXTERNAL_PHY(16)
- EXTERNAL_PHY(17)
- EXTERNAL_PHY(18)
- EXTERNAL_PHY(19)
- EXTERNAL_PHY(20)
- EXTERNAL_PHY(21)
- EXTERNAL_PHY(22)
- EXTERNAL_PHY(23)
-
- /* External phy RTL8218B #4 */
- EXTERNAL_PHY(24)
- EXTERNAL_PHY(25)
- EXTERNAL_PHY(26)
- EXTERNAL_PHY(27)
- EXTERNAL_PHY(28)
- EXTERNAL_PHY(29)
- EXTERNAL_PHY(30)
- EXTERNAL_PHY(31)
-
- /* External phy RTL8218B #5 */
- EXTERNAL_PHY(32)
- EXTERNAL_PHY(33)
- EXTERNAL_PHY(34)
- EXTERNAL_PHY(35)
- EXTERNAL_PHY(36)
- EXTERNAL_PHY(37)
- EXTERNAL_PHY(38)
- EXTERNAL_PHY(39)
-
- /* External phy RTL8218B #6 */
- EXTERNAL_PHY(40)
- EXTERNAL_PHY(41)
- EXTERNAL_PHY(42)
- EXTERNAL_PHY(43)
- EXTERNAL_PHY(44)
- EXTERNAL_PHY(45)
- EXTERNAL_PHY(46)
- EXTERNAL_PHY(47)
- };
-};
-
-&switch0 {
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- SWITCH_PORT(0, 01, qsgmii)
- SWITCH_PORT(1, 02, qsgmii)
- SWITCH_PORT(2, 03, qsgmii)
- SWITCH_PORT(3, 04, qsgmii)
- SWITCH_PORT(4, 05, qsgmii)
- SWITCH_PORT(5, 06, qsgmii)
- SWITCH_PORT(6, 07, qsgmii)
- SWITCH_PORT(7, 08, qsgmii)
-
- SWITCH_PORT(8, 09, qsgmii)
- SWITCH_PORT(9, 10, qsgmii)
- SWITCH_PORT(10, 11, qsgmii)
- SWITCH_PORT(11, 12, qsgmii)
- SWITCH_PORT(12, 13, qsgmii)
- SWITCH_PORT(13, 14, qsgmii)
- SWITCH_PORT(14, 15, qsgmii)
- SWITCH_PORT(15, 16, qsgmii)
-
- SWITCH_PORT(16, 17, qsgmii)
- SWITCH_PORT(17, 18, qsgmii)
- SWITCH_PORT(18, 19, qsgmii)
- SWITCH_PORT(19, 20, qsgmii)
- SWITCH_PORT(20, 21, qsgmii)
- SWITCH_PORT(21, 22, qsgmii)
- SWITCH_PORT(22, 23, qsgmii)
- SWITCH_PORT(23, 24, qsgmii)
-
- SWITCH_PORT(24, 25, qsgmii)
- SWITCH_PORT(25, 26, qsgmii)
- SWITCH_PORT(26, 27, qsgmii)
- SWITCH_PORT(27, 28, qsgmii)
- SWITCH_PORT(28, 29, qsgmii)
- SWITCH_PORT(29, 30, qsgmii)
- SWITCH_PORT(30, 31, qsgmii)
- SWITCH_PORT(31, 32, qsgmii)
-
- SWITCH_PORT(32, 33, qsgmii)
- SWITCH_PORT(33, 34, qsgmii)
- SWITCH_PORT(34, 35, qsgmii)
- SWITCH_PORT(35, 36, qsgmii)
- SWITCH_PORT(36, 37, qsgmii)
- SWITCH_PORT(37, 38, qsgmii)
- SWITCH_PORT(38, 39, qsgmii)
- SWITCH_PORT(39, 40, qsgmii)
-
- SWITCH_PORT(40, 41, qsgmii)
- SWITCH_PORT(41, 42, qsgmii)
- SWITCH_PORT(42, 43, qsgmii)
- SWITCH_PORT(43, 44, qsgmii)
- SWITCH_PORT(44, 45, qsgmii)
- SWITCH_PORT(45, 46, qsgmii)
- SWITCH_PORT(46, 47, qsgmii)
- SWITCH_PORT(47, 48, qsgmii)
-
- /* CPU-Port */
- port@52 {
- ethernet = <&ethernet0>;
- reg = <52>;
- phy-mode = "internal";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-};
View Lorry Controller Status