diff options
Diffstat (limited to 'target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi')
-rw-r--r-- | target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi b/target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi deleted file mode 100644 index fb2aa18d21..0000000000 --- a/target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi +++ /dev/null @@ -1,196 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> - -/ { - chosen { - bootargs = "console=ttyS0,9600"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - leds: leds { - compatible = "gpio-leds"; - - led-0 { - label = "amber:any_col"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_FAULT; - }; - - led-1 { - label = "green:giga"; - gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - }; - - led-2 { - label = "green:100m"; - gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - }; - - led-3 { - label = "green:full"; - gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <3>; - }; - - led-4 { - label = "green:loop_history"; - gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <4>; - }; - }; - - keys { - compatible = "gpio-keys"; - - led_mode { - label = "led-mode"; - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - }; - - i2c_gpio_0: i2c-gpio-0 { - compatible = "i2c-gpio"; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - gpio1: gpio@20 { - compatible = "nxp,pca9555"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - - gpio2: gpio@75 { - compatible = "nxp,pca9539"; - reg = <0x75>; - gpio-controller; - #gpio-cells = <2>; - - /* - * GPIO14 (IO1_6): Shift Register RESET (port LED) - * - Switch-M8eG PN28080K: 3x 74HC164 - * - Switch-M16eG PN28160K: 4x 74HC164 - * - Switch-M24eG PN28240K: 6x 74HC164 - * - Switch-M48eG PN28480K: 12x 74HC164 - */ - portled_sregister_reset { - gpio-hog; - gpios = <14 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "portled-sregister-reset"; - }; - }; - }; - - i2c_gpio_1: i2c-gpio-1 { - compatible = "i2c-gpio"; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - i2c_switch: i2c-switch@70 { - compatible = "nxp,pca9545"; - reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x10000>; - }; - - partition@90000 { - label = "u-boot-env2"; - reg = <0x90000 0x10000>; - }; - - partition@a0000 { - label = "sysinfo"; - reg = <0xa0000 0x60000>; - read-only; - }; - - /* - * Filesystem area in stock firmware - * (0x100000-0x1DFFFFF) - * - * stock firmware images are required to pass - * the checking by the U-Boot, also for OpenWrt - * - * in OpenWrt: - * - 0x100000-0xDFFFFF (13M): stock images - * - 0xE00000-0x1DFFFFF(16M): OpenWrt image - */ - partition@100000 { - label = "fs_reserved"; - reg = <0x100000 0xd00000>; - }; - - partition@e00000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0xe00000 0x1000000>; - }; - - partition@1e00000 { - label = "vlog_data"; - reg = <0x1e00000 0x100000>; - read-only; - }; - - partition@1f00000 { - label = "elog_data"; - reg = <0x1f00000 0x100000>; - read-only; - }; - }; - }; -}; |