1 files changed, 0 insertions, 60 deletions
diff --git a/target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch b/target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch
deleted file mode 100644
index 48e8d472c8..0000000000
--- a/target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 0fc3b9b7619c4878f73a6a7989863f0d1a3fd392 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 10 Jul 2020 21:12:16 +0200
-Subject: [PATCH] rockchip: enabled LAN port on NanoPi R2S
-
-Enable the USB3 port on the FriendlyARM NanoPi R2S.
-This is required for the USB3 attached LAN port to work.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../boot/dts/rockchip/rk3328-nanopi-r2s.dts   | 27 +++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -44,6 +44,18 @@
- 		};
- 	};
- 
-+	vcc_rtl8153: vcc-rtl8153-regulator {
-+		compatible = "regulator-fixed";
-+		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&rtl8153_en_drv>;
-+		regulator-always-on;
-+		regulator-name = "vcc_rtl8153";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		enable-active-high;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 		pinctrl-0 = <&lan_led_pin>,  <&sys_led_pin>, <&wan_led_pin>;
-@@ -271,6 +283,12 @@
- 			};
- 		};
- 	};
-+
-+	usb {
-+		rtl8153_en_drv: rtl8153-en-drv {
-+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+		};
-+	};
- };
- 
- &io_domains {
-@@ -377,3 +395,12 @@
- &usb_host0_ohci {
- 	status = "okay";
- };
-+
-+&usbdrd3 {
-+	status = "okay";
-+};
-+
-+&usbdrd_dwc3 {
-+	dr_mode = "host";
-+	status = "okay";
-+};