diff options
Diffstat (limited to 'target')
5 files changed, 67 insertions, 0 deletions
diff --git a/target/linux/layerscape/README b/target/linux/layerscape/README index a8d1846468..1e3f707b4f 100644 --- a/target/linux/layerscape/README +++ b/target/linux/layerscape/README @@ -12,6 +12,7 @@ users can bring up the board without difficulty. LS1012ARDB (QSPI NOR boot) LS1012AFRDM (QSPI NOR boot) LS1012AFRWY (QSPI NOR boot) + LS1028ARDB (QSPI NOR boot | SD card boot) LS1043ARDB (NOR boot | SD card boot) LS1046ARDB (QSPI NOR boot | SD card boot) LS1046AFRWY (QSPI NOR boot | SD card boot) @@ -95,6 +96,15 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them => sf write a0000000 0 $filesize => reset +* LS1028ARDB + Board has only one bank. Those commands will replace stock bootloader + and firmware. + => tftp a0000000 <firmware_name>-firmware.bin + => sf probe 0:0 + => sf erase 0 +$filesize + => sf write a0000000 0 $filesize + => reset + * LS1043ARDB Start up from bank0, and program firmware to bank4 with below commands. Switch to bank4 to start up OpenWrt. diff --git a/target/linux/layerscape/base-files/etc/board.d/02_network b/target/linux/layerscape/base-files/etc/board.d/02_network index b46f0b0621..172172c12c 100644 --- a/target/linux/layerscape/base-files/etc/board.d/02_network +++ b/target/linux/layerscape/base-files/etc/board.d/02_network @@ -5,6 +5,10 @@ board_config_update case "$(board_name)" in + fsl,ls1028a-rdb|\ + fsl,ls1028a-rdb-sdboot) + ucidef_set_interfaces_lan_wan "swp0 swp1 swp2 swp3" "eth0" + ;; traverse,ls1043v) ucidef_set_interface_lan "eth0 eth1 eth2 eth3" ucidef_set_interface_wan "eth4" diff --git a/target/linux/layerscape/base-files/lib/preinit/79_move_config b/target/linux/layerscape/base-files/lib/preinit/79_move_config index 901a289b66..5519e059d9 100644 --- a/target/linux/layerscape/base-files/lib/preinit/79_move_config +++ b/target/linux/layerscape/base-files/lib/preinit/79_move_config @@ -10,6 +10,7 @@ move_config() { fsl,ls1012a-frwy-sdboot | \ fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr-sdboot | \ + fsl,ls1028a-rdb-sdboot | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-frwy-sdboot | \ fsl,ls1046a-rdb-sdboot | \ diff --git a/target/linux/layerscape/base-files/lib/upgrade/platform.sh b/target/linux/layerscape/base-files/lib/upgrade/platform.sh index 857be5a744..e88dfdf145 100644 --- a/target/linux/layerscape/base-files/lib/upgrade/platform.sh +++ b/target/linux/layerscape/base-files/lib/upgrade/platform.sh @@ -71,6 +71,7 @@ platform_copy_config() { fsl,ls1012a-frwy-sdboot | \ fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr-sdboot | \ + fsl,ls1028a-rdb-sdboot | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-frwy-sdboot | \ fsl,ls1046a-rdb-sdboot | \ @@ -95,6 +96,8 @@ platform_check_image() { fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr | \ fsl,ls1021a-twr-sdboot | \ + fsl,ls1028a-rdb | \ + fsl,ls1028a-rdb-sdboot | \ fsl,ls1043a-rdb | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-frwy | \ @@ -130,6 +133,7 @@ platform_do_upgrade() { fsl,ls1012a-frdm | \ fsl,ls1012a-rdb | \ fsl,ls1021a-twr | \ + fsl,ls1028a-rdb | \ fsl,ls1043a-rdb | \ fsl,ls1046a-frwy | \ fsl,ls1046a-rdb | \ @@ -142,6 +146,7 @@ platform_do_upgrade() { fsl,ls1012a-frwy-sdboot | \ fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr-sdboot | \ + fsl,ls1028a-rdb-sdboot | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-frwy-sdboot | \ fsl,ls1046a-rdb-sdboot | \ diff --git a/target/linux/layerscape/image/armv8_64b.mk b/target/linux/layerscape/image/armv8_64b.mk index 4a69f1c19e..f5a6a055fb 100644 --- a/target/linux/layerscape/image/armv8_64b.mk +++ b/target/linux/layerscape/image/armv8_64b.mk @@ -98,6 +98,53 @@ define Device/fsl_ls1012a-frwy-sdboot endef TARGET_DEVICES += fsl_ls1012a-frwy-sdboot +define Device/fsl_ls1028a-rdb + DEVICE_VENDOR := NXP + DEVICE_MODEL := LS1028A-RDB + DEVICE_VARIANT := Default + DEVICE_DTS := freescale/fsl-ls1028a-rdb + KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb + DEVICE_PACKAGES += \ + trusted-firmware-a-ls1028a-rdb \ + kmod-hwmon-ina2xx \ + kmod-hwmon-lm90 \ + kmod-rtc-pcf2127 + IMAGE/firmware.bin := \ + ls-clean | \ + ls-append $(1)-bl2.pbl | pad-to 1M | \ + ls-append $(1)-fip.bin | pad-to 5M | \ + ls-append $(1)-uboot-env.bin | pad-to 16M | \ + append-kernel | \ + append-rootfs | pad-rootfs | check-size + IMAGE/sysupgrade.bin := \ + append-kernel | \ + append-rootfs | pad-rootfs | \ + check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata +endef +TARGET_DEVICES += fsl_ls1028a-rdb + +define Device/fsl_ls1028a-rdb-sdboot + $(Device/fsl-sdboot) + DEVICE_VENDOR := NXP + DEVICE_MODEL := LS1028A-RDB + DEVICE_VARIANT := SD Card Boot + DEVICE_DTS := freescale/fsl-ls1028a-rdb + DEVICE_PACKAGES += \ + trusted-firmware-a-ls1028a-rdb-sdboot \ + kmod-hwmon-ina2xx \ + kmod-hwmon-lm90 \ + kmod-rtc-pcf2127 + IMAGE/sdcard.img.gz := \ + ls-clean | \ + ls-append-sdhead $(1) | pad-to 4K | \ + ls-append $(1)-bl2.pbl | pad-to 1M | \ + ls-append $(1)-fip.bin | pad-to 5M | \ + ls-append $(1)-uboot-env.bin | pad-to 16M | \ + ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ + append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip +endef +TARGET_DEVICES += fsl_ls1028a-rdb-sdboot + define Device/fsl_ls1043a-rdb $(Device/fix-sysupgrade) DEVICE_VENDOR := NXP |