diff options
| author | Andy Dougherty <doughera@lafcol.lafayette.edu> | 1996-08-25 01:27:42 +0000 |
|---|---|---|
| committer | Andy Dougherty <doughera@lafcol.lafayette.edu> | 1996-08-25 01:27:42 +0000 |
| commit | 9bb683e6b9e9c477f8ad211dd2f5b8c19d1b7bc2 (patch) | |
| tree | ebad7e18a7d88b3ea7143ce23cdec0011846628c | |
| parent | 8971618ed9d829d1bde5e12f0500700acb21ec7d (diff) | |
| download | perl-5.003_03.tar.gz | |
perl 5.003_03: [patch introduction and re-organisation]perl-5.003_03
# This is my patch perl5.003_03.pat to perl5.003_02
# The full description is below.
# Please execute the following commands before applying this patch.
# (You can feed this patch to 'sh' to do so.)
# Andy Dougherty <doughera@lafcol.lafayette.edu>
# Absorbed into Changes5.002
rm -f Changes.Conf
# Not needed.
rm -f ext/POSIX/mkposixman.pl
# Moved to README.os2. I'm not sure why the README files are
# here rather than in the appropriate subdirectories.
rm -f os2/README
# Not needed.
rm -f pod/Makefile.PL
# New test for bit ops
touch t/op/bop.t
# Patches that create new tests don't always make them executable.
chmod +x t/*/*.t
# Create a new directory for Porting and Patching info.
mkdir Porting
exit 0
This is patch perl5.003_03.pat to perl version 5.003_02.
This takes you from 5.003_02 to 5.003_03.
To apply this patch, run the above commands,
cd to your perl source directory and then type
patch -p1 -N < perl5.003_03.pat
The changes are described after each /^Index/ line below. This is
designed so you can examine each change with a command such as
csplit -k perl5.003_03.pat '/^Index:/' '{99}'
Patch and enjoy,
Andy Dougherty doughera@lafcol.lafayette.edu
Dept. of Physics
Lafayette College, Easton PA 18042
| -rw-r--r-- | Changes.Conf | 2686 | ||||
| -rwxr-xr-x[-rw-r--r--] | Makefile.SH | 0 | ||||
| -rwxr-xr-x[-rw-r--r--] | configure | 0 | ||||
| -rwxr-xr-x | ext/POSIX/mkposixman.pl | 1134 | ||||
| -rwxr-xr-x[-rw-r--r--] | makeaperl.SH | 0 | ||||
| -rwxr-xr-x[-rw-r--r--] | minimod.pl | 0 | ||||
| -rw-r--r-- | os2/README | 814 | ||||
| -rwxr-xr-x[-rw-r--r--] | perl_exp.SH | 0 | ||||
| -rw-r--r-- | pod/Makefile.PL | 133 | ||||
| -rwxr-xr-x[-rw-r--r--] | t/op/bop.t | 0 | ||||
| -rw-r--r--[-rwxr-xr-x] | vms/ext/Stdio/test.pl | 0 | ||||
| -rw-r--r--[-rwxr-xr-x] | vms/fndvers.com | 0 | ||||
| -rwxr-xr-x[-rw-r--r--] | writemain.SH | 0 |
13 files changed, 0 insertions, 4767 deletions
diff --git a/Changes.Conf b/Changes.Conf deleted file mode 100644 index a956fd77da..0000000000 --- a/Changes.Conf +++ /dev/null @@ -1,2686 +0,0 @@ -------------- -Version 5.002 -------------- - -Summary of user-visible Configure and build changes since 5.001: - -Yet more enhancements and fixes have been made to the Configure and -build process for perl. Most of these will not be visible to the -ordinary user--they just make the process more robust and likely to -work on a wider range of platforms. - -This is a brief summary of the most important changes. A more -detailed description is given below. - - Slightly changed installation directories. See INSTALL. - - Include 5.000 - 5.001 upgrage notes :-) (see below). You might - want to read through them as well as these notes. - - Install documentation for perl modules and pod2* translators. You can - now view perl module documentation with either your system's man(1) - program or with the supplied perldoc script. - - Many hint file updates. - - Improve and simplify detection of local libraries and header files. - - Expand documentation of installation process in new INSTALL file. - - Try to reduce Unixisms (such as SH file extraction) to enhance - portability to other platforms. There's still a long way to go. - -Upgrade Traps and Pitfalls: - -Since a lot has changed in the build process, you are probably best off -starting with a fresh copy of the perl5.002 sources. In particular, -your 5.000 or 5.001 config.sh will contain several variables that are no -longer needed. Further, improvements in the Configure tests may mean -that some of the answers will be different than they were in previous -versions, and which answer to keep can be difficult to sort out. -Therefore, you are probably better off ignoring your old config.sh, as -in the following: - - make -k distclean # (if you've built perl before) - rm -f config.sh # (in case distclean mysteriously fails) - sh Configure [whatever options you like] - make depend - make - make test - -This, and much more, is described in the new INSTALL file. - -Here are the detailed changes from 5.002beta1 to 5.002b2 in -reverse chronolgical order: - -=item 5.002beta2 - -This is patch.2b2 to perl5.002beta1. -This takes you from 5.002beta1h to 5.002beta2. - -Renaming this as beta2 reflects _my_ feeling that it's time to -wrap up things for the release of 5.002. - -Index: Changes.Conf - - Include changes from patches 2b1a .. 2b1h, as well as this - patch. - -Index: Configure - - Use nm -D on Linux with shared libraries, if the system - supports nm -D. - -Prereq: 3.0.1.8 -*** perl5.002b1h/Configure Thu Jan 4 11:14:37 1996 ---- perl5.002b2/Configure Thu Jan 11 17:09:13 1996 - -Index: MANIFEST - - Include Stub Readline library as part of new debugger. - - Include hints file dec_osf for ODBM_File extension. - -*** perl5.002b1h/MANIFEST Wed Jan 3 14:37:54 1996 ---- perl5.002b2/MANIFEST Sat Jan 13 16:30:43 1996 - -Index: configpm - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/configpm Tue Oct 31 11:51:52 1995 ---- perl5.002b2/configpm Fri Jan 12 10:53:34 1996 - -Index: doop.c - - Chip's patch to use STDCHAR and U8 nearly everywhere instead of - assuming 8-bit chars or ~(char) 0 == 0xff. - -*** perl5.002b1h/doop.c Wed Nov 15 15:08:01 1995 ---- perl5.002b2/doop.c Fri Jan 12 15:05:04 1996 - -Index: embed.h - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/embed.h Thu Jan 4 13:28:08 1996 ---- perl5.002b2/embed.h Fri Jan 12 15:09:11 1996 - -Index: ext/DB_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/DB_File/Makefile.PL Tue Nov 14 14:14:17 1995 ---- perl5.002b2/ext/DB_File/Makefile.PL Tue Jan 9 16:54:17 1996 - -*** perl5.002b1h/ext/DB_File/Makefile.PL Tue Nov 14 14:14:17 1995 ---- perl5.002b2/ext/DB_File/Makefile.PL Sat Jan 13 17:07:11 1996 - -Index: ext/DynaLoader/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/DynaLoader/Makefile.PL Tue Jun 6 12:24:37 1995 ---- perl5.002b2/ext/DynaLoader/Makefile.PL Sat Jan 13 17:16:34 1996 - -Index: ext/Fcntl/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/Fcntl/Makefile.PL Thu Jan 19 18:58:52 1995 ---- perl5.002b2/ext/Fcntl/Makefile.PL Sat Jan 13 17:16:38 1996 - -Index: ext/GDBM_File/GDBM_File.pm - - Make the NAME section a legal paragraph. - -*** perl5.002b1h/ext/GDBM_File/GDBM_File.pm Mon Nov 20 10:22:26 1995 ---- perl5.002b2/ext/GDBM_File/GDBM_File.pm Fri Jan 12 16:11:38 1996 - -Index: ext/GDBM_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/GDBM_File/Makefile.PL Wed Feb 22 14:36:36 1995 ---- perl5.002b2/ext/GDBM_File/Makefile.PL Sat Jan 13 17:08:02 1996 - -Index: ext/NDBM_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/NDBM_File/Makefile.PL Wed Feb 22 14:36:39 1995 ---- perl5.002b2/ext/NDBM_File/Makefile.PL Sat Jan 13 17:08:13 1996 - -Index: ext/ODBM_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/ODBM_File/Makefile.PL Mon Jun 5 15:03:44 1995 ---- perl5.002b2/ext/ODBM_File/Makefile.PL Sat Jan 13 17:08:22 1996 - -Index: ext/ODBM_File/hints/dec_osf.pl - - New file. - -*** /dev/null Sat Jan 13 16:48:01 1996 ---- perl5.002b2/ext/ODBM_File/hints/dec_osf.pl Sat Jan 13 16:30:01 1996 - -Index: ext/POSIX/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/POSIX/Makefile.PL Thu Jan 19 18:59:00 1995 ---- perl5.002b2/ext/POSIX/Makefile.PL Sat Jan 13 17:08:27 1996 - -Index: ext/SDBM_File/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/SDBM_File/Makefile.PL Tue Nov 14 11:16:43 1995 ---- perl5.002b2/ext/SDBM_File/Makefile.PL Sat Jan 13 17:16:49 1996 - -Index: ext/SDBM_File/sdbm/sdbm.c - - Give correct prototype for free. - -Prereq: 1.16 -*** perl5.002b1h/ext/SDBM_File/sdbm/sdbm.c Mon Nov 13 23:01:41 1995 ---- perl5.002b2/ext/SDBM_File/sdbm/sdbm.c Fri Jan 12 10:33:32 1996 - -Index: ext/Safe/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/Safe/Makefile.PL Tue Jan 2 15:43:53 1996 ---- perl5.002b2/ext/Safe/Makefile.PL Sat Jan 13 17:08:45 1996 - -Index: ext/Safe/Safe.pm - - Patch from Andreas. - -*** perl5.002b1h/ext/Safe/Safe.pm Tue Jan 2 15:45:27 1996 ---- perl5.002b2/ext/Safe/Safe.pm Fri Jan 12 10:52:33 1996 - -Index: ext/Safe/Safe.xs - - Patch for older compilers which had namespace confusion. - -*** perl5.002b1h/ext/Safe/Safe.xs Tue Jan 2 15:45:27 1996 ---- perl5.002b2/ext/Safe/Safe.xs Fri Jan 5 14:27:47 1996 - -Index: ext/Socket/Makefile.PL - - Disable prototypes. - Disable pod2man. - -*** perl5.002b1h/ext/Socket/Makefile.PL Sat Dec 2 16:23:52 1995 ---- perl5.002b2/ext/Socket/Makefile.PL Sat Jan 13 17:08:52 1996 - -Index: ext/Socket/Socket.xs - - Use unsigned shorts for ports. - -*** perl5.002b1h/ext/Socket/Socket.xs Sat Dec 2 15:46:20 1995 ---- perl5.002b2/ext/Socket/Socket.xs Mon Jan 8 21:59:52 1996 - -Index: global.sym - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/global.sym Wed Jan 3 12:01:59 1996 ---- perl5.002b2/global.sym Fri Jan 12 10:53:34 1996 - -Index: gv.c - - Avoid VMS sprintf bug with buffers >1024. - -*** perl5.002b1h/gv.c Fri Dec 8 10:37:22 1995 ---- perl5.002b2/gv.c Fri Jan 12 15:27:27 1996 - -Index: hints/aix.sh - - Updated - -*** perl5.002b1h/hints/aix.sh Mon Nov 13 23:03:33 1995 ---- perl5.002b2/hints/aix.sh Fri Jan 12 12:09:48 1996 - -Index: hints/irix_5.sh - - Updated - -*** perl5.002b1h/hints/irix_5.sh Tue Jan 2 14:53:52 1996 ---- perl5.002b2/hints/irix_5.sh Tue Jan 9 16:05:11 1996 - -Index: hints/linux.sh - - Updated - -*** perl5.002b1h/hints/linux.sh Fri Jun 2 10:20:55 1995 ---- perl5.002b2/hints/linux.sh Fri Jan 12 11:43:52 1996 - -Index: hints/machten.sh - - Updated - -*** perl5.002b1h/hints/machten.sh Sun Mar 12 02:36:04 1995 ---- perl5.002b2/hints/machten.sh Wed Jan 10 14:53:32 1996 - -Index: installman - - Use File::Path::mkpath instead of our own makedir(). - ./perl installman --man1dir=man1 could lead to infinte recursion - in old makedir() routine. Use the standard library instead. - -*** perl5.002b1h/installman Thu Dec 28 16:06:11 1995 ---- perl5.002b2/installman Thu Jan 11 16:12:30 1996 - -Index: installperl - - Use File::Path::mkpath instead of our own makedir(). - -*** perl5.002b1h/installperl Wed Jan 3 14:33:57 1996 ---- perl5.002b2/installperl Thu Jan 11 16:12:16 1996 - -Index: interp.sym - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/interp.sym Fri Nov 10 17:17:32 1995 ---- perl5.002b2/interp.sym Fri Jan 12 15:05:04 1996 - -Index: lib/AutoLoader.pm - - Undo Tim's tainting patch from beta1h. - -*** perl5.002b1h/lib/AutoLoader.pm Tue Jan 2 16:10:36 1996 ---- perl5.002b2/lib/AutoLoader.pm Fri Jan 5 16:02:28 1996 - -Index: lib/Carp.pm -*** perl5.002b1h/lib/Carp.pm Tue Jan 2 12:10:38 1996 ---- perl5.002b2/lib/Carp.pm Fri Jan 12 11:23:31 1996 - -Index: lib/ExtUtils/MM_VMS.pm - - Updated to MakeMaker-5.16. - -*** perl5.002b1h/lib/ExtUtils/MM_VMS.pm Tue Jan 2 14:07:10 1996 ---- perl5.002b2/lib/ExtUtils/MM_VMS.pm Thu Jan 4 21:00:46 1996 - -Index: lib/ExtUtils/MakeMaker.pm - - Updated to MakeMaker-5.16. - -Prereq: 1.129 -*** perl5.002b1h/lib/ExtUtils/MakeMaker.pm Tue Jan 2 14:07:10 1996 ---- perl5.002b2/lib/ExtUtils/MakeMaker.pm Wed Jan 10 16:13:05 1996 - -Index: lib/File/Find.pm - - Fixed exporting of symbols to work. - -*** perl5.002b1h/lib/File/Find.pm Wed Nov 15 15:20:03 1995 ---- perl5.002b2/lib/File/Find.pm Wed Jan 10 14:46:24 1996 - -Index: lib/I18N/Collate.pm - - Updated documentation to match program. - -*** perl5.002b1h/lib/I18N/Collate.pm Fri Jun 2 11:30:49 1995 ---- perl5.002b2/lib/I18N/Collate.pm Fri Jan 5 16:05:26 1996 - -Index: lib/Term/ReadLine.pm - - Stub new file to interface to various readline packages, or - give stub functions if none are found. - -*** /dev/null Sat Jan 13 16:48:01 1996 ---- perl5.002b2/lib/Term/ReadLine.pm Fri Jan 12 11:23:31 1996 - -Index: lib/dumpvar.pl - - Ilya's new debugger. - -*** perl5.002b1h/lib/dumpvar.pl Tue Oct 18 12:36:00 1994 ---- perl5.002b2/lib/dumpvar.pl Fri Jan 12 11:23:31 1996 - -Index: lib/perl5db.pl - - Ilya's new debugger. - -*** perl5.002b1h/lib/perl5db.pl Tue Jan 2 16:30:33 1996 ---- perl5.002b2/lib/perl5db.pl Fri Jan 12 11:23:31 1996 - -Index: lib/sigtrap.pm - - Ilya's new debugger. - -*** perl5.002b1h/lib/sigtrap.pm Thu May 25 11:20:13 1995 ---- perl5.002b2/lib/sigtrap.pm Fri Jan 12 11:23:31 1996 - -Index: miniperlmain.c - - More robust i18nl14n() function from jhi. - -*** perl5.002b1h/miniperlmain.c Thu Jan 4 12:03:37 1996 ---- perl5.002b2/miniperlmain.c Mon Jan 8 22:00:19 1996 - -Index: myconfig - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/myconfig Tue Apr 4 12:13:21 1995 ---- perl5.002b2/myconfig Fri Jan 12 10:53:35 1996 - -Index: op.c - - Chip's U8/STDCHAR patch. - -*** perl5.002b1h/op.c Wed Jan 3 14:17:01 1996 ---- perl5.002b2/op.c Fri Jan 12 15:05:05 1996 - -Index: perl.c - - Change Copyright date to include 1996. Hope you don't mind. - - Presumptively call this beta2. - -*** perl5.002b1h/perl.c Thu Jan 4 15:13:53 1996 ---- perl5.002b2/perl.c Fri Jan 12 15:05:05 1996 - -Index: perl.h - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/perl.h Wed Jan 3 12:21:55 1996 ---- perl5.002b2/perl.h Fri Jan 12 15:05:04 1996 - -Index: pod/Makefile - - Use PERL=../miniperl - -*** perl5.002b1h/pod/Makefile Wed Jan 3 15:06:41 1996 ---- perl5.002b2/pod/Makefile Fri Jan 5 14:14:30 1996 - -Index: pod/perlembed.pod - - Give correct usage for the 5th arg to perl_parse (don't pass - env). - -*** perl5.002b1h/pod/perlembed.pod Thu Dec 28 16:34:07 1995 ---- perl5.002b2/pod/perlembed.pod Tue Jan 9 16:02:51 1996 - -Index: pod/perlfunc.pod - - Work around a pod2man complaint about the -X function. - -*** perl5.002b1h/pod/perlfunc.pod Tue Jan 2 15:39:26 1996 ---- perl5.002b2/pod/perlfunc.pod Fri Jan 12 11:04:15 1996 - -*** perl5.002b1h/pod/perlfunc.pod Tue Jan 2 15:39:26 1996 ---- perl5.002b2/pod/perlfunc.pod Fri Jan 12 11:04:15 1996 - -Index: pod/perlovl.pod - - Add DESCRIPTION to head1 line. - -*** perl5.002b1h/pod/perlovl.pod Thu Dec 28 16:34:13 1995 ---- perl5.002b2/pod/perlovl.pod Thu Jan 11 17:11:16 1996 - -Index: pod/perlrun.pod - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/pod/perlrun.pod Thu Dec 28 16:34:15 1995 ---- perl5.002b2/pod/perlrun.pod Fri Jan 12 10:53:35 1996 - -Index: pp_ctl.c - - Debugger patch. - -*** perl5.002b1h/pp_ctl.c Wed Jan 3 12:23:13 1996 ---- perl5.002b2/pp_ctl.c Fri Jan 12 15:05:05 1996 - -Index: t/lib/posix.t - - Not having POSIX shouldn't result in test failing TEST harness. - -*** perl5.002b1h/t/lib/posix.t Mon Jan 16 22:27:33 1995 ---- perl5.002b2/t/lib/posix.t Tue Jan 9 15:33:14 1996 - -Index: t/lib/safe.t - - Not having Safe shouldn't result in test failing TEST harness. - -*** perl5.002b1h/t/lib/safe.t Tue Jan 2 15:43:53 1996 ---- perl5.002b2/t/lib/safe.t Tue Jan 9 15:35:43 1996 - -Index: t/lib/socket.t - - Not having Socket shouldn't result in test failing TEST harness. - -*** perl5.002b1h/t/lib/socket.t Fri Dec 8 11:16:01 1995 ---- perl5.002b2/t/lib/socket.t Tue Jan 9 15:35:51 1996 - -Index: t/op/time.t - - Test missed year-end wrap-around by one day. - -*** perl5.002b1h/t/op/time.t Tue Oct 18 12:46:31 1994 ---- perl5.002b2/t/op/time.t Wed Jan 10 16:04:41 1996 - -Index: toke.c - - Chip's U8/STDCHAR patch. - - Tim's "add a ; after PERL5DB" patch. - -*** perl5.002b1h/toke.c Wed Dec 6 13:24:19 1995 ---- perl5.002b2/toke.c Fri Jan 12 15:05:06 1996 - -Index: utils/h2xs.PL - - Updated to 1.13. Include Changes template file. - -*** perl5.002b1h/utils/h2xs.PL Tue Jan 2 13:50:55 1996 ---- perl5.002b2/utils/h2xs.PL Thu Jan 11 16:59:48 1996 - -Index: writemain.SH - - Updates from Tim's -m/-M/-V patch. - -*** perl5.002b1h/writemain.SH Sat Nov 18 15:51:55 1995 ---- perl5.002b2/writemain.SH Fri Jan 12 10:53:35 1996 - -=item patch.2b1h - -This is patch.2b1h to perl5.002beta1. This is mainly a clean-up -patch. No progress is made dealing with memory leaks or -optimizations, though I have used #define STRANGE_MALLOC to -work around at least some problems. - -Index: Configure - - Upgraded to metaconfig patchlevel 60. - - Add in usesafe variable to include or exclude the Safe extension. - - Test for sigaction(). - - Check for pager. This was actually accidental since perldoc.PL - mentions $pager and metaconfig has a unit to check for the - user's pager. In retrospect, I decided the Configure check - didn't do any harm and some extension writers might decide to - use it. - - Always put man1dir under $prefix unless a command line - override is used. - - Allow command-line overrides of $man1ext and $man3ext. - - - Allow man1dir and man3dir names like .../man.1 instead of - just .../man1. - - Lots of rearrangements of various pieces of Configure. - This might be because I ran metaconfig on a different - architecture. - - libc searching now honors $libpth. Previously, it (almost) - always looked in /usr/lib before checking /lib. - - Only prompt user if voidflags is not 15. If voidflags is 15, then - we presume all is well. - - -Prereq: 3.0.1.8 -*** perl5.002b1g/Configure Fri Dec 8 11:23:56 1995 ---- perl5.002b1h/Configure Thu Jan 4 11:14:37 1996 - -Index: INSTALL - - Document how to skip various extensions. - - Indicate that site_perl is typically under (not beside) - /usr/local/lib/perl5. - - Mention how to avoid nm extraction. - - -*** perl5.002b1g/INSTALL Tue Nov 21 22:54:28 1995 ---- perl5.002b1h/INSTALL Thu Jan 4 11:06:28 1996 - -Index: MANIFEST - - Rearrange files some. Try to move .PL utilities to a separate - utils/ subdirectory. - - Merge c2ph.PL and c2ph.doc. - - Add the Safe extension. - -*** perl5.002b1g/MANIFEST Fri Jan 5 11:41:50 1996 ---- perl5.002b1h/MANIFEST Wed Jan 3 14:37:54 1996 - -Index: Makefile.SH - - Now builds .PL utilities in the utils/ subdirectory. - -*** perl5.002b1g/Makefile.SH Fri Dec 8 10:36:33 1995 ---- perl5.002b1h/Makefile.SH Wed Jan 3 14:28:30 1996 - -Index: README.vms - - Updated. - -*** perl5.002b1g/README.vms Wed Nov 15 14:23:10 1995 ---- perl5.002b1h/README.vms Tue Jan 2 16:33:02 1996 - -Index: XSUB.h - - Updated to match xsubpp-1.929. - -*** perl5.002b1g/XSUB.h Wed Dec 6 13:25:26 1995 ---- perl5.002b1h/XSUB.h Tue Jan 2 11:57:57 1996 - -Index: config_h.SH - - Check for HAS_SIGACCTION - - Add STARTPERL define for C code (specifically, a2p). - -Prereq: 3.0.1.4 -*** perl5.002b1g/config_h.SH Fri Dec 8 11:23:56 1995 ---- perl5.002b1h/config_h.SH Thu Jan 4 11:14:37 1996 - -Index: doio.c - - VMS changes for kill. - -*** perl5.002b1g/doio.c Wed Nov 15 14:36:12 1995 ---- perl5.002b1h/doio.c Tue Jan 2 16:27:07 1996 - -Index: embed.h - - Auto-generated from global.sym and interp.sym. - -*** perl5.002b1g/embed.h Wed Nov 15 14:48:47 1995 ---- perl5.002b1h/embed.h Thu Jan 4 13:28:08 1996 - -Index: ext/DynaLoader/DynaLoader.pm - - VMS-specific updates. - -*** perl5.002b1g/ext/DynaLoader/DynaLoader.pm Fri Nov 10 11:49:00 1995 ---- perl5.002b1h/ext/DynaLoader/DynaLoader.pm Tue Jan 2 16:28:02 1996 - -Index: ext/DynaLoader/dl_vms.xs - - Updated to Oct 31, 1995 version. - -*** perl5.002b1g/ext/DynaLoader/dl_vms.xs Tue Oct 31 11:06:06 1995 ---- perl5.002b1h/ext/DynaLoader/dl_vms.xs Tue Jan 2 16:27:32 1996 - -Index: global.sym - - Added maxo and save_pptr items. - -*** perl5.002b1g/global.sym Wed Nov 15 14:58:14 1995 ---- perl5.002b1h/global.sym Wed Jan 3 12:01:59 1996 - -Index: hints/README.hints - - List of tested systems updated a little. - -*** perl5.002b1g/hints/README.hints Fri May 5 14:12:06 1995 ---- perl5.002b1h/hints/README.hints Tue Dec 12 20:03:36 1995 - -Index: hints/irix_5.sh - - Note SGI stdio/malloc related problem. - -*** perl5.002b1g/hints/irix_5.sh Fri May 5 14:07:52 1995 ---- perl5.002b1h/hints/irix_5.sh Tue Jan 2 14:53:52 1996 - -Index: hints/irix_6.sh - - Address change. - - Note SGI stdio/malloc related problem. - -*** perl5.002b1g/hints/irix_6.sh Fri May 5 14:08:41 1995 ---- perl5.002b1h/hints/irix_6.sh Tue Jan 2 14:54:04 1996 - -Index: hints/irix_6_2.sh - - Address change. - -*** perl5.002b1g/hints/irix_6_2.sh Mon Nov 20 11:16:55 1995 ---- perl5.002b1h/hints/irix_6_2.sh Tue Jan 2 14:49:45 1996 - -Index: hints/os2.sh - - Updated. - -*** perl5.002b1g/hints/os2.sh Tue Nov 14 11:07:33 1995 ---- perl5.002b1h/hints/os2.sh Tue Dec 26 17:51:16 1995 - -Index: installman - - Use fork if available. - -*** perl5.002b1g/installman Fri Jan 5 11:41:52 1996 ---- perl5.002b1h/installman Thu Dec 28 16:06:11 1995 - -Index: installperl - - Use new location of utility scripts. - - Eliminate double '//' and extra "". - -*** perl5.002b1g/installperl Mon Nov 20 12:55:03 1995 ---- perl5.002b1h/installperl Wed Jan 3 14:33:57 1996 - -Index: lib/AutoLoader.pm - - Avoid tainting problems. - -*** perl5.002b1g/lib/AutoLoader.pm Wed Nov 15 15:04:59 1995 ---- perl5.002b1h/lib/AutoLoader.pm Tue Jan 2 16:10:36 1996 - -Index: lib/Carp.pm - - Honor trailing \n in messages, as is done for warn(). - -*** perl5.002b1g/lib/Carp.pm Thu May 25 11:16:07 1995 ---- perl5.002b1h/lib/Carp.pm Tue Jan 2 12:10:38 1996 - -Index: lib/Cwd.pm - - VMS patches. - -*** perl5.002b1g/lib/Cwd.pm Fri Jan 5 11:41:52 1996 ---- perl5.002b1h/lib/Cwd.pm Tue Jan 2 16:28:57 1996 - -Index: lib/Exporter.pm - - Include Tim Bunce's enhanced Exporter. I also tried to - resolve the two copies of documentation that I had. - -*** perl5.002b1g/lib/Exporter.pm Fri Jan 5 11:41:52 1996 ---- perl5.002b1h/lib/Exporter.pm Thu Jan 4 14:02:08 1996 - -Index: lib/ExtUtils/MM_VMS.pm - - New file. Incorporates VMS-specific items into MakeMaker. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/lib/ExtUtils/MM_VMS.pm Tue Jan 2 14:07:10 1996 - -Index: lib/ExtUtils/MakeMaker.pm -Prereq: 1.116 - - Updated from 5.12 to 5.16. - -*** perl5.002b1g/lib/ExtUtils/MakeMaker.pm Fri Jan 5 11:41:53 1996 ---- perl5.002b1h/lib/ExtUtils/MakeMaker.pm Tue Jan 2 14:07:10 1996 - -Index: lib/ExtUtils/Manifest.pm - - Updated from MakeMaker 5.12 to 5.16. - -*** perl5.002b1g/lib/ExtUtils/Manifest.pm Fri Jan 5 11:41:54 1996 ---- perl5.002b1h/lib/ExtUtils/Manifest.pm Tue Jan 2 14:07:10 1996 - -Index: lib/ExtUtils/Mkbootstrap.pm - - Updated from MakeMaker 5.12 to 5.16. - -*** perl5.002b1g/lib/ExtUtils/Mkbootstrap.pm Fri Jan 5 11:41:54 1996 ---- perl5.002b1h/lib/ExtUtils/Mkbootstrap.pm Tue Jan 2 14:07:10 1996 - -Index: lib/ExtUtils/xsubpp - - Updated from xsubpp-1.924 to 1.929. - -*** perl5.002b1g/lib/ExtUtils/xsubpp Sun Nov 26 16:04:50 1995 ---- perl5.002b1h/lib/ExtUtils/xsubpp Tue Jan 2 16:29:59 1996 - -Index: lib/File/Path.pm - - VMS-specific changes. - -*** perl5.002b1g/lib/File/Path.pm Wed Nov 15 15:20:31 1995 ---- perl5.002b1h/lib/File/Path.pm Tue Jan 2 16:30:21 1996 - -Index: lib/Pod/Text.pm - - New file. This was created by Dov (???) and enhanced - by Kenneth Albanowski, but all based on Tom C.'s pod2text. - Unfortunately, they used a version of pod2text earlier than - the one in patch.2b1g. I've tried to straighten this all out. - - Equally unfortunately, we've all left Tom as the AUTHOR, even - though we can't hold him responsible for errors he didn't - introduce. Oh well. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/lib/Pod/Text.pm Thu Jan 4 14:16:50 1996 - -Index: lib/Sys/Hostname.pm - - VMS-specific changes. - -*** perl5.002b1g/lib/Sys/Hostname.pm Fri Jan 5 11:41:55 1996 ---- perl5.002b1h/lib/Sys/Hostname.pm Tue Jan 2 16:30:49 1996 - -Index: lib/diagnostics.pm - - A patch from Tim Bunce (?) - -*** perl5.002b1g/lib/diagnostics.pm Wed Dec 6 13:58:42 1995 ---- perl5.002b1h/lib/diagnostics.pm Tue Jan 2 12:10:37 1996 - -Index: lib/perl5db.pl - - VMS-specific changes. - -*** perl5.002b1g/lib/perl5db.pl Wed Nov 15 22:37:45 1995 ---- perl5.002b1h/lib/perl5db.pl Tue Jan 2 16:30:33 1996 - -Index: lib/splain - - Fix some old typos. - -*** perl5.002b1g/lib/splain Tue Nov 14 16:16:36 1995 ---- perl5.002b1h/lib/splain Tue Jan 2 12:10:37 1996 - -Index: makeaperl.SH - - Use the 'new' startperl variable. - -*** perl5.002b1g/makeaperl.SH Thu Jun 1 11:20:52 1995 ---- perl5.002b1h/makeaperl.SH Tue Jan 2 12:11:28 1996 - -Index: mg.c - - Set up a reliable signal handler, courtesy of Kenneth Albanowski. - This needs to be documented still. The idea is that even on - System V systems, you won't have to reset the signal handler as - the first action inside your signal handler. - -*** perl5.002b1g/mg.c Wed Nov 15 15:44:10 1995 ---- perl5.002b1h/mg.c Thu Jan 4 13:49:12 1996 - -Index: minimod.pl - - Give a proper NAME description. - -*** perl5.002b1g/minimod.pl Sun Nov 26 16:19:55 1995 ---- perl5.002b1h/minimod.pl Tue Jan 2 14:30:24 1996 - -Index: miniperlmain.c - - Better locale handling, courtesy of jhi. - - Include a proper cast of NULL for non-prototyping compilers. - -*** perl5.002b1g/miniperlmain.c Sat Nov 18 15:48:10 1995 ---- perl5.002b1h/miniperlmain.c Thu Jan 4 12:03:37 1996 - -Index: op.c - - Turn on USE_OP_MASK by default for the Safe extension. I'll be - interested in benchmark results with this on and off. - -*** perl5.002b1g/op.c Wed Nov 15 22:10:36 1995 ---- perl5.002b1h/op.c Wed Jan 3 14:17:01 1996 - -Index: os2/Makefile.SHs - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/Makefile.SHs Sun Dec 24 13:55:22 1995 - -Index: os2/README - - Updated. - -*** perl5.002b1g/os2/README Tue Nov 14 14:42:13 1995 ---- perl5.002b1h/os2/README Tue Dec 26 18:31:32 1995 - -Index: os2/diff.MANIFEST - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.MANIFEST Tue Dec 26 19:54:12 1995 - -Index: os2/diff.Makefile - - Updated - -*** perl5.002b1g/os2/diff.Makefile Tue Nov 14 11:09:29 1995 ---- perl5.002b1h/os2/diff.Makefile Fri Dec 8 00:09:56 1995 - -Index: os2/diff.c2ph - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.c2ph Thu Dec 7 15:25:52 1995 - -Index: os2/diff.configure - - Updated. - -*** perl5.002b1g/os2/diff.configure Sun Nov 12 01:31:34 1995 ---- perl5.002b1h/os2/diff.configure Tue Dec 26 19:57:08 1995 - -Index: os2/diff.db_file - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.db_file Tue Dec 19 02:14:54 1995 - -Index: os2/diff.init - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.init Sun Nov 26 15:05:48 1995 - -Index: os2/diff.installman - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.installman Wed Nov 22 03:50:26 1995 - -Index: os2/diff.installperl - - Updated. - -*** perl5.002b1g/os2/diff.installperl Tue Nov 14 11:09:28 1995 ---- perl5.002b1h/os2/diff.installperl Wed Nov 22 02:59:58 1995 - -Index: os2/diff.mkdep - - Updated. - -*** perl5.002b1g/os2/diff.mkdep Tue Nov 14 11:09:28 1995 ---- perl5.002b1h/os2/diff.mkdep Sun Nov 26 15:00:24 1995 - -Index: os2/diff.rest - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/diff.rest Thu Dec 7 16:03:26 1995 - -Index: os2/diff.x2pMakefile - - Updated. - -*** perl5.002b1g/os2/diff.x2pMakefile Tue Nov 14 11:09:29 1995 ---- perl5.002b1h/os2/diff.x2pMakefile Wed Nov 22 21:55:42 1995 - -Index: os2/notes - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/notes Tue Dec 26 19:55:30 1995 - -Index: os2/os2.c - - Updated. - -*** perl5.002b1g/os2/os2.c Tue Nov 14 11:07:33 1995 ---- perl5.002b1h/os2/os2.c Sun Dec 24 13:43:02 1995 - -Index: os2/os2ish.h - - Updated. - -*** perl5.002b1g/os2/os2ish.h Tue Nov 14 11:07:33 1995 ---- perl5.002b1h/os2/os2ish.h Mon Dec 18 16:17:38 1995 - -Index: os2/perl2cmd.pl - - New file. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/os2/perl2cmd.pl Tue Dec 19 11:20:42 1995 - -Index: perl.c - - Updated to say beta1h. - - Move VMS env code. - -*** perl5.002b1g/perl.c Fri Jan 5 11:41:56 1996 ---- perl5.002b1h/perl.c Thu Jan 4 15:13:53 1996 - -Index: perl.h - - 5.002beta1 attempted some memory optimizations, but unfortunately - they can result in a memory leak problem. This can be - avoided by #define STRANGE_MALLOC. I do that here until - consensus is reached on a better strategy for handling the - memory optimizations. - - Include maxo for the maximum number of operations (needed - for the Safe extension). - -*** perl5.002b1g/perl.h Wed Nov 15 17:13:16 1995 ---- perl5.002b1h/perl.h Wed Jan 3 12:21:55 1996 - -Index: pod/Makefile - - Include -I../lib so that pod2* can find the appropriate libraries. - - The pod names are once again sorted. - - The PERL line is wrong. It should read - PERL = ../miniperl - This file is automatically generated, but I happened to do it on - a system without miniperl avaialable, so my script fell back on - the perl default. - -*** perl5.002b1g/pod/Makefile Fri Jan 5 11:41:56 1996 ---- perl5.002b1h/pod/Makefile Wed Jan 3 15:06:41 1996 - -Index: pod/perlmod.pod - - Mention the Safe extension. - -*** perl5.002b1g/pod/perlmod.pod Fri Jan 5 11:41:59 1996 ---- perl5.002b1h/pod/perlmod.pod Thu Jan 4 13:52:14 1996 - -Index: pod/perltoc.pod - - Rebuilt using pod/buildtoc and fmt. - -*** perl5.002b1g/pod/perltoc.pod Fri Jan 5 11:42:00 1996 ---- perl5.002b1h/pod/perltoc.pod Thu Jan 4 14:04:20 1996 - -Index: pod/pod2text.PL -*** perl5.002b1g/pod/pod2text.PL Fri Jan 5 11:42:01 1996 ---- perl5.002b1h/pod/pod2text.PL Tue Jan 2 14:28:24 1996 - -Index: pp_sys.c - - VMS changes ? - -*** perl5.002b1g/pp_sys.c Wed Nov 15 21:51:33 1995 ---- perl5.002b1h/pp_sys.c Tue Jan 2 16:32:50 1996 - -Index: t/lib/safe.t - - New test. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/t/lib/safe.t Tue Jan 2 15:43:53 1996 - -Index: utils/Makefile - - New file to build the utilities. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/utils/Makefile Wed Jan 3 14:06:18 1996 - -Index: utils/c2ph.PL - - Ungracefully merge the old c2ph.doc in as an embedded pod. - - Delete lots of trailing spaces and tabs that have crept in. - -Prereq: 1.7 -*** perl5.002b1g/utils/c2ph.PL Mon Nov 20 12:36:17 1995 ---- perl5.002b1h/utils/c2ph.PL Wed Jan 3 14:05:41 1996 - -Index: utils/h2ph.PL - - Add patch for AIX files which sometimes have #include<foo.h>, - i.e., no spaces after the word 'include'. - -*** perl5.002b1g/utils/h2ph.PL Mon Nov 27 10:14:50 1995 ---- perl5.002b1h/utils/h2ph.PL Tue Jan 2 16:13:31 1996 - -Index: utils/h2xs.PL - - Add version stuff. - - The old version didn't have a number. This one's called 1.12. - -*** perl5.002b1g/utils/h2xs.PL Sun Nov 19 22:37:58 1995 ---- perl5.002b1h/utils/h2xs.PL Tue Jan 2 13:50:55 1996 - -Index: utils/perlbug.PL - - New utility. - -*** /dev/null Fri Jan 5 12:48:01 1996 ---- perl5.002b1h/utils/perlbug.PL Sat Nov 18 16:15:13 1995 - -Index: utils/perldoc.PL - - Better error handling. - - Updated to use Pod::Text, if available. - - More VMS friendly. - - New -u option . - -*** perl5.002b1g/utils/perldoc.PL Tue Nov 14 14:57:57 1995 ---- perl5.002b1h/utils/perldoc.PL Tue Jan 2 14:28:08 1996 - -Index: utils/pl2pm.PL - - Changed into a .PL extract file for proper setting of - $startperl. - - Add _minimal_ pod documentation. - -*** perl5.002b1g/utils/pl2pm.PL Mon Jan 16 23:45:07 1995 ---- perl5.002b1h/utils/pl2pm.PL Wed Jan 3 14:14:57 1996 - -Index: vms/Makefile - - Updated for VMS. - -*** perl5.002b1g/vms/Makefile Wed Nov 15 22:05:15 1995 ---- perl5.002b1h/vms/Makefile Tue Jan 2 16:33:53 1996 - -Index: vms/config.vms - - Updated for VMS. - -*** perl5.002b1g/vms/config.vms Wed Nov 15 22:05:26 1995 ---- perl5.002b1h/vms/config.vms Tue Jan 2 16:33:09 1996 - -Index: vms/descrip.mms - - Updated for VMS. - -*** perl5.002b1g/vms/descrip.mms Wed Nov 15 22:05:38 1995 ---- perl5.002b1h/vms/descrip.mms Tue Jan 2 16:33:18 1996 - -Index: vms/ext/Filespec.pm - - Updated for VMS. - -*** perl5.002b1g/vms/ext/Filespec.pm Sun Mar 12 03:14:26 1995 ---- perl5.002b1h/vms/ext/Filespec.pm Tue Jan 2 16:33:25 1996 - -Index: vms/ext/MM_VMS.pm - - Updated for VMS. This might be obsolete now that we have - lib/ExtUtils/MM_VMS.pm. - -*** perl5.002b1g/vms/ext/MM_VMS.pm Wed Nov 15 22:05:48 1995 ---- perl5.002b1h/vms/ext/MM_VMS.pm Tue Jan 2 16:33:32 1996 - -Index: vms/gen_shrfls.pl - - Updated for VMS. - -*** perl5.002b1g/vms/gen_shrfls.pl Wed Nov 15 22:06:27 1995 ---- perl5.002b1h/vms/gen_shrfls.pl Tue Jan 2 16:33:47 1996 - -Index: vms/genconfig.pl - - Updated for VMS. - -*** perl5.002b1g/vms/genconfig.pl Sun Mar 12 03:14:36 1995 ---- perl5.002b1h/vms/genconfig.pl Tue Jan 2 16:33:39 1996 - -Index: vms/perlvms.pod - - Updated for VMS. - -*** perl5.002b1g/vms/perlvms.pod Wed Nov 15 22:06:32 1995 ---- perl5.002b1h/vms/perlvms.pod Tue Jan 2 16:33:59 1996 - -Index: vms/test.com - - Updated for VMS. - -*** perl5.002b1g/vms/test.com Wed Nov 15 22:06:59 1995 ---- perl5.002b1h/vms/test.com Tue Jan 2 16:34:07 1996 - -Index: vms/vms.c - - Updated for VMS. - -Prereq: 2.2 -*** perl5.002b1g/vms/vms.c Wed Nov 15 22:07:10 1995 ---- perl5.002b1h/vms/vms.c Tue Jan 2 16:34:13 1996 - -Index: vms/vmsish.h - - Updated for VMS. - -*** perl5.002b1g/vms/vmsish.h Wed Nov 15 22:07:24 1995 ---- perl5.002b1h/vms/vmsish.h Tue Jan 2 16:34:20 1996 - -Index: vms/writemain.pl - - Updated for VMS. - -*** perl5.002b1g/vms/writemain.pl Mon Mar 6 20:00:18 1995 ---- perl5.002b1h/vms/writemain.pl Tue Jan 2 16:34:26 1996 - -Index: x2p/a2py.c - - Use new config_h.SH STARTPERL #define. - -*** perl5.002b1g/x2p/a2py.c Tue Mar 7 11:53:10 1995 ---- perl5.002b1h/x2p/a2py.c Tue Jan 2 12:11:28 1996 - -Index: x2p/find2perl.PL - - Add missing "" around $Config{startperl}. - -*** perl5.002b1g/x2p/find2perl.PL Sun Nov 19 23:11:58 1995 ---- perl5.002b1h/x2p/find2perl.PL Tue Jan 2 12:11:27 1996 - -Index: x2p/s2p.PL - - Add missing "" around $Config{startperl}. - -*** perl5.002b1g/x2p/s2p.PL Sun Nov 19 23:14:59 1995 ---- perl5.002b1h/x2p/s2p.PL Tue Jan 2 12:11:27 1996 - - -=item patch.2b1g - -This is patch.2b1g to perl5.002beta1. - -This patch is just my packaging of Tom's documentation patches -he released as patch.2b1g. - -Index: MANIFEST -*** perl5.002b1f/MANIFEST Fri Dec 8 13:34:53 1995 ---- perl5.002b1g/MANIFEST Thu Dec 21 13:00:58 1995 - -Index: ext/DB_File/DB_File.pm -*** perl5.002b1f/ext/DB_File/DB_File.pm Tue Nov 14 14:14:25 1995 ---- perl5.002b1g/ext/DB_File/DB_File.pm Thu Dec 21 13:00:58 1995 - -Index: ext/POSIX/POSIX.pm -*** perl5.002b1f/ext/POSIX/POSIX.pm Fri Dec 8 10:23:54 1995 ---- perl5.002b1g/ext/POSIX/POSIX.pm Thu Dec 21 13:00:58 1995 - -Index: ext/POSIX/POSIX.pod -*** perl5.002b1f/ext/POSIX/POSIX.pod Fri Dec 8 10:30:40 1995 ---- perl5.002b1g/ext/POSIX/POSIX.pod Thu Dec 21 13:00:59 1995 - -Index: ext/Safe/Makefile.PL -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/ext/Safe/Makefile.PL Thu Dec 21 13:01:00 1995 - -Index: ext/Safe/Safe.pm -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/ext/Safe/Safe.pm Thu Dec 21 13:01:00 1995 - -Index: ext/Safe/Safe.xs -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/ext/Safe/Safe.xs Thu Dec 21 13:01:00 1995 - -Index: ext/Socket/Socket.pm -*** perl5.002b1f/ext/Socket/Socket.pm Wed Dec 6 13:58:41 1995 ---- perl5.002b1g/ext/Socket/Socket.pm Thu Dec 21 13:01:00 1995 - -Index: installman -*** perl5.002b1f/installman Mon Nov 6 11:16:43 1995 ---- perl5.002b1g/installman Thu Dec 21 13:01:00 1995 - -Index: lib/AutoSplit.pm -*** perl5.002b1f/lib/AutoSplit.pm Wed Nov 15 15:06:19 1995 ---- perl5.002b1g/lib/AutoSplit.pm Thu Dec 21 13:01:01 1995 - -Index: lib/Cwd.pm -*** perl5.002b1f/lib/Cwd.pm Fri Dec 8 10:42:46 1995 ---- perl5.002b1g/lib/Cwd.pm Thu Dec 21 13:01:01 1995 - -Index: lib/Devel/SelfStubber.pm -*** perl5.002b1f/lib/Devel/SelfStubber.pm Sun Nov 26 16:59:51 1995 ---- perl5.002b1g/lib/Devel/SelfStubber.pm Thu Dec 21 13:01:01 1995 - -Index: lib/Env.pm -*** perl5.002b1f/lib/Env.pm Tue Oct 18 12:34:43 1994 ---- perl5.002b1g/lib/Env.pm Thu Dec 21 13:01:01 1995 - -Index: lib/Exporter.pm -*** perl5.002b1f/lib/Exporter.pm Wed Nov 15 15:19:33 1995 ---- perl5.002b1g/lib/Exporter.pm Thu Dec 21 13:01:01 1995 - -Index: lib/ExtUtils/Liblist.pm -*** perl5.002b1f/lib/ExtUtils/Liblist.pm Tue Dec 5 07:56:53 1995 ---- perl5.002b1g/lib/ExtUtils/Liblist.pm Thu Dec 21 13:01:01 1995 - -Index: lib/ExtUtils/MakeMaker.pm -Prereq: 1.115 -*** perl5.002b1f/lib/ExtUtils/MakeMaker.pm Tue Dec 5 13:20:56 1995 ---- perl5.002b1g/lib/ExtUtils/MakeMaker.pm Thu Dec 21 13:01:02 1995 - -Index: lib/ExtUtils/Manifest.pm -*** perl5.002b1f/lib/ExtUtils/Manifest.pm Tue Dec 5 13:21:00 1995 ---- perl5.002b1g/lib/ExtUtils/Manifest.pm Thu Dec 21 13:01:02 1995 - -Index: lib/ExtUtils/Mkbootstrap.pm -*** perl5.002b1f/lib/ExtUtils/Mkbootstrap.pm Thu Oct 19 05:58:34 1995 ---- perl5.002b1g/lib/ExtUtils/Mkbootstrap.pm Thu Dec 21 13:01:02 1995 - -Index: lib/FileHandle.pm -*** perl5.002b1f/lib/FileHandle.pm Thu May 25 11:18:20 1995 ---- perl5.002b1g/lib/FileHandle.pm Thu Dec 21 13:01:02 1995 - -Index: lib/IPC/Open2.pm -*** perl5.002b1f/lib/IPC/Open2.pm Thu May 25 11:31:07 1995 ---- perl5.002b1g/lib/IPC/Open2.pm Thu Dec 21 13:01:03 1995 - -Index: lib/IPC/Open3.pm -Prereq: 1.1 -*** perl5.002b1f/lib/IPC/Open3.pm Wed Nov 15 15:21:11 1995 ---- perl5.002b1g/lib/IPC/Open3.pm Thu Dec 21 13:01:03 1995 - -Index: lib/SelfLoader.pm -*** perl5.002b1f/lib/SelfLoader.pm Sun Nov 26 16:59:51 1995 ---- perl5.002b1g/lib/SelfLoader.pm Thu Dec 21 13:01:03 1995 - -Index: lib/Sys/Hostname.pm -*** perl5.002b1f/lib/Sys/Hostname.pm Tue Oct 18 12:38:25 1994 ---- perl5.002b1g/lib/Sys/Hostname.pm Thu Dec 21 13:01:03 1995 - -Index: lib/Sys/Syslog.pm -*** perl5.002b1f/lib/Sys/Syslog.pm Wed Dec 6 14:07:54 1995 ---- perl5.002b1g/lib/Sys/Syslog.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Term/Cap.pm -*** perl5.002b1f/lib/Term/Cap.pm Sun Mar 12 00:14:42 1995 ---- perl5.002b1g/lib/Term/Cap.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Term/Complete.pm -*** perl5.002b1f/lib/Term/Complete.pm Wed May 24 12:09:48 1995 ---- perl5.002b1g/lib/Term/Complete.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Test/Harness.pm -*** perl5.002b1f/lib/Test/Harness.pm Mon Nov 13 23:01:40 1995 ---- perl5.002b1g/lib/Test/Harness.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Text/Soundex.pm -Prereq: 1.2 -*** perl5.002b1f/lib/Text/Soundex.pm Tue Oct 18 12:38:42 1994 ---- perl5.002b1g/lib/Text/Soundex.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Text/Tabs.pm -*** perl5.002b1f/lib/Text/Tabs.pm Sat Nov 18 16:08:55 1995 ---- perl5.002b1g/lib/Text/Tabs.pm Thu Dec 21 13:01:04 1995 - -Index: lib/Text/Wrap.pm -*** perl5.002b1f/lib/Text/Wrap.pm Sat Nov 18 16:08:56 1995 ---- perl5.002b1g/lib/Text/Wrap.pm Thu Dec 21 13:01:05 1995 - -Index: lib/TieHash.pm -*** perl5.002b1f/lib/TieHash.pm Wed Nov 15 15:27:47 1995 ---- perl5.002b1g/lib/TieHash.pm Thu Dec 21 13:01:05 1995 - -Index: lib/Time/Local.pm -*** perl5.002b1f/lib/Time/Local.pm Tue Oct 18 12:38:47 1994 ---- perl5.002b1g/lib/Time/Local.pm Thu Dec 21 13:01:05 1995 - -Index: lib/less.pm -*** perl5.002b1f/lib/less.pm Thu May 25 11:19:59 1995 ---- perl5.002b1g/lib/less.pm Thu Dec 21 13:01:05 1995 - -Index: lib/overload.pm -*** perl5.002b1f/lib/overload.pm Sat Nov 18 16:03:33 1995 ---- perl5.002b1g/lib/overload.pm Thu Dec 21 13:01:05 1995 - -Index: lib/strict.pm -*** perl5.002b1f/lib/strict.pm Thu May 25 11:20:27 1995 ---- perl5.002b1g/lib/strict.pm Thu Dec 21 13:01:05 1995 - -Index: lib/syslog.pl -*** perl5.002b1f/lib/syslog.pl Tue Oct 18 12:37:13 1994 ---- perl5.002b1g/lib/syslog.pl Thu Dec 21 13:01:05 1995 - -Index: perl.c -*** perl5.002b1f/perl.c Sun Nov 19 16:11:29 1995 ---- perl5.002b1g/perl.c Thu Dec 21 13:01:06 1995 - -Index: pod/Makefile -*** perl5.002b1f/pod/Makefile Mon Nov 20 13:00:50 1995 ---- perl5.002b1g/pod/Makefile Thu Dec 21 13:01:06 1995 - -Index: pod/PerlDoc/Functions.pm -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/PerlDoc/Functions.pm Thu Dec 21 13:01:07 1995 - -Index: pod/PerlDoc/Functions.pm.POSIX -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/PerlDoc/Functions.pm.POSIX Thu Dec 21 13:01:07 1995 - -Index: pod/buildtoc -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/buildtoc Thu Dec 21 13:01:07 1995 - -Index: pod/perl.pod -*** perl5.002b1f/pod/perl.pod Sat Nov 18 17:23:58 1995 ---- perl5.002b1g/pod/perl.pod Thu Dec 21 13:01:07 1995 - -Index: pod/perlbot.pod -*** perl5.002b1f/pod/perlbot.pod Fri Nov 10 17:27:33 1995 ---- perl5.002b1g/pod/perlbot.pod Thu Dec 21 13:01:07 1995 - -Index: pod/perldata.pod -*** perl5.002b1f/pod/perldata.pod Sat Nov 18 17:23:59 1995 ---- perl5.002b1g/pod/perldata.pod Thu Dec 21 13:01:07 1995 - -Index: pod/perldiag.pod -*** perl5.002b1f/pod/perldiag.pod Sun Nov 19 22:10:58 1995 ---- perl5.002b1g/pod/perldiag.pod Thu Dec 21 13:01:08 1995 - -Index: pod/perldsc.pod -*** perl5.002b1f/pod/perldsc.pod Sat Nov 18 17:24:22 1995 ---- perl5.002b1g/pod/perldsc.pod Thu Dec 21 13:01:08 1995 - -Index: pod/perlembed.pod -*** perl5.002b1f/pod/perlembed.pod Tue Oct 18 12:39:24 1994 ---- perl5.002b1g/pod/perlembed.pod Thu Dec 21 13:01:09 1995 - -Index: pod/perlform.pod -*** perl5.002b1f/pod/perlform.pod Sat Nov 18 17:23:59 1995 ---- perl5.002b1g/pod/perlform.pod Thu Dec 21 13:01:09 1995 - -Index: pod/perlfunc.pod -*** perl5.002b1f/pod/perlfunc.pod Sat Nov 18 17:24:01 1995 ---- perl5.002b1g/pod/perlfunc.pod Thu Dec 21 13:01:09 1995 - -Index: pod/perlguts.pod -*** perl5.002b1f/pod/perlguts.pod Tue Oct 31 15:38:18 1995 ---- perl5.002b1g/pod/perlguts.pod Thu Dec 21 13:01:10 1995 - -Index: pod/perlipc.pod -*** perl5.002b1f/pod/perlipc.pod Sat Nov 18 17:24:02 1995 ---- perl5.002b1g/pod/perlipc.pod Thu Dec 21 13:01:11 1995 - -Index: pod/perllol.pod -*** perl5.002b1f/pod/perllol.pod Sat Nov 18 17:24:22 1995 ---- perl5.002b1g/pod/perllol.pod Thu Dec 21 13:01:11 1995 - -Index: pod/perlmod.pod -*** perl5.002b1f/pod/perlmod.pod Sat Nov 18 17:24:03 1995 ---- perl5.002b1g/pod/perlmod.pod Thu Dec 21 13:01:11 1995 - -Index: pod/perlobj.pod -*** perl5.002b1f/pod/perlobj.pod Sun Mar 12 00:48:38 1995 ---- perl5.002b1g/pod/perlobj.pod Thu Dec 21 13:01:11 1995 - -Index: pod/perlop.pod -*** perl5.002b1f/pod/perlop.pod Sat Nov 18 17:24:03 1995 ---- perl5.002b1g/pod/perlop.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlovl.pod -*** perl5.002b1f/pod/perlovl.pod Mon Jan 23 13:25:35 1995 ---- perl5.002b1g/pod/perlovl.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlpod.pod -*** perl5.002b1f/pod/perlpod.pod Sun Nov 19 22:22:59 1995 ---- perl5.002b1g/pod/perlpod.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlre.pod -*** perl5.002b1f/pod/perlre.pod Sun Nov 26 16:57:20 1995 ---- perl5.002b1g/pod/perlre.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlref.pod -*** perl5.002b1f/pod/perlref.pod Sat Nov 18 17:24:04 1995 ---- perl5.002b1g/pod/perlref.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlrun.pod -*** perl5.002b1f/pod/perlrun.pod Wed Feb 22 18:32:59 1995 ---- perl5.002b1g/pod/perlrun.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlsec.pod -*** perl5.002b1f/pod/perlsec.pod Wed Feb 22 18:33:02 1995 ---- perl5.002b1g/pod/perlsec.pod Thu Dec 21 13:01:12 1995 - -Index: pod/perlstyle.pod -*** perl5.002b1f/pod/perlstyle.pod Tue Oct 18 12:40:13 1994 ---- perl5.002b1g/pod/perlstyle.pod Thu Dec 21 13:01:13 1995 - -Index: pod/perlsub.pod -*** perl5.002b1f/pod/perlsub.pod Sun Mar 12 22:42:58 1995 ---- perl5.002b1g/pod/perlsub.pod Thu Dec 21 13:01:13 1995 - -Index: pod/perlsyn.pod -*** perl5.002b1f/pod/perlsyn.pod Sat Nov 18 17:24:04 1995 ---- perl5.002b1g/pod/perlsyn.pod Thu Dec 21 13:01:14 1995 - -Index: pod/perltie.pod -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/perltie.pod Thu Dec 21 13:01:14 1995 - -Index: pod/perltoc.pod -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/perltoc.pod Thu Dec 21 13:01:14 1995 - -Index: pod/perltrap.pod -*** perl5.002b1f/pod/perltrap.pod Wed Nov 15 21:36:11 1995 ---- perl5.002b1g/pod/perltrap.pod Thu Dec 21 13:01:14 1995 - -Index: pod/perlvar.pod -*** perl5.002b1f/pod/perlvar.pod Wed Nov 15 21:36:59 1995 ---- perl5.002b1g/pod/perlvar.pod Thu Dec 21 13:01:15 1995 - -Index: pod/perlxs.pod -*** perl5.002b1f/pod/perlxs.pod Sun Nov 19 22:12:44 1995 ---- perl5.002b1g/pod/perlxs.pod Thu Dec 21 13:01:15 1995 - -Index: pod/perlxstut.pod -*** perl5.002b1f/pod/perlxstut.pod Mon Nov 20 13:02:12 1995 ---- perl5.002b1g/pod/perlxstut.pod Thu Dec 21 13:01:15 1995 - -Index: pod/pod2man.PL -Prereq: 1.5 -*** perl5.002b1f/pod/pod2man.PL Wed Nov 15 22:32:51 1995 ---- perl5.002b1g/pod/pod2man.PL Thu Dec 21 13:01:15 1995 - -Index: pod/pod2text -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/pod2text Thu Dec 21 13:01:16 1995 - -Index: pod/roffitall -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/roffitall Thu Dec 21 13:01:16 1995 - -Index: pod/splitpod -*** /dev/null Wed Jan 3 14:35:56 1996 ---- perl5.002b1g/pod/splitpod Thu Dec 21 13:01:16 1995 - -=item patch.2b1f - -This is patch.2b1f to perl5.002beta1. - -Index: Changes.Conf - -Include 5.001m -> 5.002beta1 changes. - -*** perl5.002b1e/Changes.Conf Mon Nov 20 10:08:05 1995 ---- perl5.002b1f/Changes.Conf Wed Dec 6 15:29:48 1995 - -Index: Configure - - Include Jeff Okamoto's patch to allow arbitrary specification - of $startperl. - - As requested, I have moved site_perl to be under - $privlib, by default. The default will now be - /usr/local/lib/perl5/site_perl. This is in accord with the way - emacs used to do it :-). - - -Prereq: 3.0.1.8 -*** perl5.002b1e/Configure Fri Dec 8 14:55:26 1995 ---- perl5.002b1f/Configure Fri Dec 8 11:23:56 1995 - -Index: MANIFEST - Add in POSIX.pod. I didn't include Dean's mkposixman tool because - it seemed to confuse MakeMaker, and I didn't want to manually fix - the POSIX/Makefile.PL file today. - - Renamed minimod.PL. The idea is as follows: I'd like to reserve - the .PL suffix for files that are extracted during build time, and - then can be deleted after installation. That is, it will be - analogous to the .SH suffix. For example, h2xs.PL creates - h2xs, and a 'make realclean' will remove the h2xs. Minimod.PL - was an exception to this pattern. Eventually, the .PL dependencies - will be generated automatically, just as the .SH dependencies are - now. - - Add in socket test. - -*** perl5.002b1e/MANIFEST Fri Dec 8 14:55:27 1995 ---- perl5.002b1f/MANIFEST Fri Dec 8 13:34:53 1995 - -Index: Makefile.SH - - Renamed minimod.PL to minimod.pl - -*** perl5.002b1e/Makefile.SH Mon Nov 20 15:56:12 1995 ---- perl5.002b1f/Makefile.SH Fri Dec 8 10:36:33 1995 - -Index: XSUB.h - - Include (SV*) cast in the newXSproto #define. - -*** perl5.002b1e/XSUB.h Fri Dec 8 14:55:14 1995 ---- perl5.002b1f/XSUB.h Wed Dec 6 13:25:26 1995 - -Index: ext/POSIX/POSIX.pm - - I have included Dean's patch and the .pod generated by mkposixman. - -*** perl5.002b1e/ext/POSIX/POSIX.pm Wed Nov 15 14:54:09 1995 ---- perl5.002b1f/ext/POSIX/POSIX.pm Fri Dec 8 10:23:54 1995 - -Index: ext/POSIX/POSIX.pod - - I have included Dean's patch and the .pod generated by mkposixman. - -*** /dev/null Fri Dec 8 13:36:14 1995 ---- perl5.002b1f/ext/POSIX/POSIX.pod Fri Dec 8 10:30:40 1995 - -Index: ext/POSIX/POSIX.xs - - I have included Dean's patch and the .pod generated by mkposixman. - -*** perl5.002b1e/ext/POSIX/POSIX.xs Wed Nov 15 14:56:22 1995 ---- perl5.002b1f/ext/POSIX/POSIX.xs Fri Dec 8 10:23:54 1995 - -Index: ext/Socket/Socket.pm - - Replace errant sockaddr_in by correct sockaddr_un. - Remove an extra ')'. -- from Tom C. - -*** perl5.002b1e/ext/Socket/Socket.pm Fri Dec 8 14:55:28 1995 ---- perl5.002b1f/ext/Socket/Socket.pm Wed Dec 6 13:58:41 1995 - -Index: gv.c - - Fix from Nick Ing-Simmons to get HvNAME(stash) from caller's - package. - -*** perl5.002b1e/gv.c Wed Nov 15 14:58:39 1995 ---- perl5.002b1f/gv.c Fri Dec 8 10:37:22 1995 - -Index: lib/Cwd.pm - - Fix a long-standing problem where insufficient permissions higher - up in the directory tree caused getcwd to fail. This often showed - up on AFS. - -*** perl5.002b1e/lib/Cwd.pm Mon Nov 13 23:01:38 1995 ---- perl5.002b1f/lib/Cwd.pm Fri Dec 8 10:42:46 1995 - -Index: lib/Sys/Syslog.pm - - Modernize Syslog.pm to 'use Socket;' and 'use Sys::Hostname'. - Alas, I've lost the attribution for this patch. Sorry about - that. - -*** perl5.002b1e/lib/Sys/Syslog.pm Thu Feb 9 20:05:36 1995 ---- perl5.002b1f/lib/Sys/Syslog.pm Wed Dec 6 14:07:54 1995 - -Index: lib/diagnostics.pm - - Fixes from Tom. - -*** perl5.002b1e/lib/diagnostics.pm Tue Nov 14 16:16:36 1995 ---- perl5.002b1f/lib/diagnostics.pm Wed Dec 6 13:58:42 1995 - -Index: t/lib/socket.t - - New test from Tom. I've allowed it to fail if the echo service is - disabled, as is apparently the case on some systems. - -*** /dev/null Fri Dec 8 13:36:14 1995 ---- perl5.002b1f/t/lib/socket.t Fri Dec 8 11:16:01 1995 - -Index: toke.c - - A patch from Paul Marquess "purely for source filters". - -*** perl5.002b1e/toke.c Wed Nov 15 22:08:23 1995 ---- perl5.002b1f/toke.c Wed Dec 6 13:24:19 1995 - -=item patch.2b1e - -This is patch.2b1e to perl5.002beta1. This is simply -an upgrade from MakeMaker-5.10 to MakeMaker-5.11. - - -Index: lib/ExtUtils/Liblist.pm -*** perl5.002b1d/lib/ExtUtils/Liblist.pm Sat Dec 2 16:50:47 1995 ---- perl5.002b1e/lib/ExtUtils/Liblist.pm Wed Dec 6 11:52:22 1995 - -Index: lib/ExtUtils/MakeMaker.pm -Prereq: 1.114 -*** perl5.002b1d/lib/ExtUtils/MakeMaker.pm Sat Dec 2 16:50:48 1995 ---- perl5.002b1e/lib/ExtUtils/MakeMaker.pm Wed Dec 6 11:52:22 1995 - -Index: lib/ExtUtils/Manifest.pm -*** perl5.002b1d/lib/ExtUtils/Manifest.pm Sat Dec 2 16:50:48 1995 ---- perl5.002b1e/lib/ExtUtils/Manifest.pm Wed Dec 6 11:52:22 1995 - -=item patch.2b1d - -This is patch.2b1d to perl5.002beta1. - -This patch includes patches for the following items: - - NETaa14710: Included bsdi_bsdos.sh hint file. - - pod/perlre.pod: Mention 32bit limit. - - Configure Updates. - - Update Socket.xs to version 1.5. This handles - systems that might not have <sys/un.h>. - - Fix missing quotes in h2ph.PL - -These are each described in detail below, after the corresponding -index line. - -Index: Configure - - locincpth should now work as documented in INSTALL - - Improved guessing of man1dir - - Remove spurious semicolon in NONBLOCK testing. - - Send failed './loc' message to fd 4. - - Check for <sys/un.h> - - Allow 'unixisms' to be overridden by hint files. - - Remove -r test from './loc' since some executables are - not readable. - - Remove spurious doublings of -L/usr/local/lib when reusing old - config.sh. - - Improved domain name guessing, from - Hallvard B Furuseth <h.b.furuseth@usit.uio.no> - - Include sitelib (architecture-independent directory). - - -Prereq: 3.0.1.8 -*** perl5.002b1c/Configure Mon Nov 20 10:00:33 1995 ---- perl5.002b1d/Configure Sat Dec 2 15:35:13 1995 - -Index: INSTALL - - Consistently use "sh Configure" in examples. - - Add reminder that interactive use may be helpful. - -*** perl5.002b1c/INSTALL Mon Nov 20 10:46:48 1995 ---- perl5.002b1d/INSTALL Tue Nov 21 22:54:28 1995 - -Index: MANIFEST - - Include renamed hint file. - -*** perl5.002b1c/MANIFEST Sat Dec 2 16:20:21 1995 ---- perl5.002b1d/MANIFEST Sun Nov 26 17:03:31 1995 - -Index: config_h.SH - - Include check for <sys/un.h>. - - Include SITELIB_EXP definition for architecture-independent - site-specific modules. Usually, this will be - /usr/local/lib/site_perl. - -Prereq: 3.0.1.4 -*** perl5.002b1c/config_h.SH Mon Nov 20 10:00:33 1995 ---- perl5.002b1d/config_h.SH Sat Dec 2 15:35:13 1995 - -Index: ext/Socket/Makefile.PL - - Update version number to 1.5. - -*** perl5.002b1c/ext/Socket/Makefile.PL Sat Nov 18 15:36:56 1995 ---- perl5.002b1d/ext/Socket/Makefile.PL Sat Dec 2 16:23:52 1995 - -Index: ext/Socket/Socket.pm - - Update to version 1.5. - -*** perl5.002b1c/ext/Socket/Socket.pm Sat Nov 18 15:37:03 1995 ---- perl5.002b1d/ext/Socket/Socket.pm Sat Dec 2 16:25:17 1995 - -Index: ext/Socket/Socket.xs - - Update to version 1.5. - This only supports the sockaddr_un -related functions if your - system has <sys/un.h>. SVR3 systems generally don't. - -*** perl5.002b1c/ext/Socket/Socket.xs Sat Nov 18 15:36:57 1995 ---- perl5.002b1d/ext/Socket/Socket.xs Sat Dec 2 15:46:20 1995 - -Index: h2ph.PL - - Add missing quotes. - -*** perl5.002b1c/h2ph.PL Sun Nov 19 23:00:39 1995 ---- perl5.002b1d/h2ph.PL Mon Nov 27 10:14:50 1995 - -Index: hints/bsdi_bsdos.sh - - Updated and renamed file. - -*** perl5.002b1c/hints/bsdi_bsdos.sh Thu Jan 19 19:08:34 1995 ---- perl5.002b1d/hints/bsdi_bsdos.sh Sun Nov 26 16:50:26 1995 - -Index: pod/perlre.pod - - Mention 65536 limit explicitly. - -*** perl5.002b1c/pod/perlre.pod Wed Nov 15 21:35:31 1995 ---- perl5.002b1d/pod/perlre.pod Sun Nov 26 16:57:20 1995 - -=item patch.2b1c - -This is patch.2b1c to perl5.002beta1. This patch includes - lib/SelfLoader, version 1.06, and - lib/Devel/SelfStubber, version 1.01. -These versions include prototype support. - -This is simply re-posting these library modules. -I have also updated MANIFEST to include them. - - -Index: MANIFEST -*** perl5.002b1b/MANIFEST Sat Dec 2 16:13:24 1995 ---- perl5.002b1c/MANIFEST Sat Dec 2 16:12:54 1995 - -Index: lib/Devel/SelfStubber.pm -*** /dev/null Fri Dec 1 16:03:22 1995 ---- perl5.002b1c/lib/Devel/SelfStubber.pm Sun Nov 26 16:14:19 1995 - -Index: lib/SelfLoader.pm -*** /dev/null Fri Dec 1 16:03:22 1995 ---- perl5.002b1c/lib/SelfLoader.pm Sun Nov 26 16:14:50 1995 - -=item patch.2b1b - -This is patch.2b1b to perl5.002beta1. This is simply -MakeMaker-5.10. Nothing else is included. - -It contains: - -Upgrade to MakeMaker-5.10 -and a revised minimod.PL that now writes a pod section into ExtUtils::Miniperl. - -Index: lib/ExtUtils/Liblist.pm -*** perl5.002b1a/lib/ExtUtils/Liblist.pm Mon Nov 13 22:03:29 1995 ---- perl5.002b1b/lib/ExtUtils/Liblist.pm Sat Dec 2 15:58:00 1995 - -Index: lib/ExtUtils/MakeMaker.pm -*** perl5.002b1a/lib/ExtUtils/MakeMaker.pm Sat Nov 18 16:01:05 1995 ---- perl5.002b1b/lib/ExtUtils/MakeMaker.pm Sat Dec 2 15:58:01 1995 - -Index: lib/ExtUtils/Manifest.pm -*** perl5.002b1a/lib/ExtUtils/Manifest.pm Mon Nov 13 22:03:30 1995 ---- perl5.002b1b/lib/ExtUtils/Manifest.pm Sat Dec 2 15:58:02 1995 - -Index: minimod.PL -*** perl5.002b1a/minimod.PL Sun Nov 19 23:01:02 1995 ---- perl5.002b1b/minimod.PL Sat Dec 2 15:58:02 1995 - -=item patch.2b1a - -This is patch.2b1a to perl5.002beta1. This is simply -xsubpp-1.944. It includes perl prototype support. - -Index: XSUB.h - -Updated to match xsubpp-1.944. Includes perl prototype support. - -*** perl5.002beta1/XSUB.h Fri Nov 10 13:11:02 1995 ---- perl5.002b1a/XSUB.h Sat Dec 2 15:43:54 1995 - -Index: lib/ExtUtils/xsubpp - -Updated to xsubpp-1.944. Includes perl prototype support. - -*** perl5.002beta1/lib/ExtUtils/xsubpp Mon Nov 20 11:03:49 1995 ---- perl5.002b1a/lib/ExtUtils/xsubpp Sat Dec 2 15:43:55 1995 - - - -Here are the detailed changes from 5.001m to 5.002beta1: - -# rm -f Doc/perl5-notes # Obsolete -# rm -f c2ph.SH # Replaced by c2ph.PL -# rm -f emacs/cperl-mode # Obsolete -# rm -f emacs/emacs19 # Obsolete -# rm -f emacs/perl-mode.el # Obsolete -# rm -f emacs/perldb.el # Obsolete -# rm -f emacs/perldb.pl # Obsolete -# rm -f emacs/tedstuff # Obsolete -# rm -f h2ph.SH # Replaced by h2ph.PL -# rm -f h2xs.SH # Replaced by h2xs.PL -# rm -f hints/hpux_9.sh # Replaced by generic hpux.sh -# rm -f hints/sco_3.sh # Replaced by generic sco.sh -# rm -f perldoc.SH # Replaced by perldoc.PL -# rm -f pod/pod2html.SH # Replaced by pod2html.PL -# rm -f pod/pod2latex.SH # Replaced by pod2latex.PL -# rm -f pod/pod2man.SH # Replaced by pod2man.PL -# rm -f x2p/find2perl.SH # Replaced by find2perl.PL -# rm -f x2p/s2p.SH # Replaced by s2p.PL -# exit - - -Index: patchlevel.h -Incremented to 2! -*** perl5.001.lwall/patchlevel.h Sun Mar 12 22:29:12 1995 ---- perl5.002beta1/patchlevel.h Sat Nov 18 15:41:15 1995 - -Index: Changes -This includes the Changes file Larry sent me. I added the first -paragraph. -*** perl5.001.lwall/Changes Mon Mar 13 00:44:07 1995 ---- perl5.002beta1/Changes Sat Nov 18 15:43:29 1995 - -Index: Changes.Conf -An all too brief summary. -*** perl5.001.lwall/Changes.Conf Thu Oct 19 21:00:06 1995 ---- perl5.002beta1/Changes.Conf Mon Nov 20 10:08:05 1995 - -Index: Configure - -Upgraded to metaconfig PL60 (despite the erroneous metaconfig message. - -Layed some groundwork for support on non Unix systems, such as OS/2. -Define things such as .o vs. .obj, '' vs. .exe, .a vs. .lib, etc. - -Include I_LOCALE testing. - -Include checks for new library set-up. I don't want to ever have to -change this again. It's documented more clearly in INSTALL. - -Figure out correct string for $startperl (usually -#!/usr/local/bin/perl). - -Improve signal detection even more. Once again, the signal number -corresponding to sig_name[n] is n (up to NSIG-1). Gaps in signal -numbers (e.g. on Solaris) are allowed and are filled with -innocuous names such as NUM37 NUM38, etc., where the 37 or 38 -represents the actual signal number. - -Prereq: 3.0.1.8 -*** perl5.001.lwall/Configure Mon Oct 23 14:08:59 1995 ---- perl5.002beta1/Configure Mon Nov 20 10:00:33 1995 - -Index: INSTALL - -Explain the library directory structure. - -Remove some tailing whitespace. - -Indicate that only the interfaces to gdbm and db are provided, not -the libraries themselves. - -Add section on upgrading from previous versions of perl5.00x. - -Mention how to override old config.sh with Configure -D and -O. - -*** perl5.001.lwall/INSTALL Mon Oct 23 14:10:26 1995 ---- perl5.002beta1/INSTALL Mon Nov 20 10:46:48 1995 - -Index: MANIFEST - -In an attempt to make the distribution slightly less Unix specific, -I've changed .SH extraction to a .PL extraction where possible. -That way folks on systems without a shell can still get the -auxilliarly files such as find2perl (assuming they *can* build -perl). - -The emacs/ directory was hopelessly out of date. I don't use emacs, -but included a current cperl-mode.el - -*** perl5.001.lwall/MANIFEST Tue Nov 14 15:21:03 1995 ---- perl5.002beta1/MANIFEST Mon Nov 20 12:40:41 1995 - -Index: Makefile.SH - -Add variables for non unix systems. - -Add .PL file extraction logic. - -*** perl5.001.lwall/Makefile.SH Tue Nov 14 20:25:48 1995 ---- perl5.002beta1/Makefile.SH Mon Nov 20 15:56:12 1995 - -Index: XSUB.h - -Protect arguments of macros with (). - -*** perl5.001.lwall/XSUB.h Tue Mar 7 14:10:00 1995 ---- perl5.002beta1/XSUB.h Fri Nov 10 13:11:02 1995 - -Index: c2ph.PL -Replaces c2ph.SH. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/c2ph.PL Mon Nov 20 12:36:17 1995 - -Index: cflags.SH -Allow for .o or .obj in file names. -*** perl5.001.lwall/cflags.SH Thu Jan 19 19:06:13 1995 ---- perl5.002beta1/cflags.SH Tue Nov 14 15:18:41 1995 - -Index: config_H -Updated. -Prereq: 3.0.1.3 -*** perl5.001.lwall/config_H Thu Oct 19 21:01:14 1995 ---- perl5.002beta1/config_H Mon Nov 20 15:41:49 1995 - -Index: config_h.SH -Updated to match new Configure. -Prereq: 3.0.1.3 -*** perl5.001.lwall/config_h.SH Mon Oct 23 14:10:38 1995 ---- perl5.002beta1/config_h.SH Mon Nov 20 10:00:33 1995 - -Index: configpm -Add in routine to print out full config.sh file. -*** perl5.001.lwall/configpm Wed Jun 7 19:46:01 1995 ---- perl5.002beta1/configpm Tue Oct 31 11:51:52 1995 - -Index: doop.c -Check for sprintf memory overflow that can arise from things -like %999999s. - -*** perl5.001.lwall/doop.c Sun Jul 2 23:33:44 1995 ---- perl5.002beta1/doop.c Wed Nov 15 15:08:01 1995 - -Index: emacs/cperl-mode.el -New version. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/emacs/cperl-mode.el Sat Nov 11 16:29:33 1995 - -Index: embed.h -Remove unnecessary whichsigname introduced in patch.1n. -*** perl5.001.lwall/embed.h Tue Nov 14 15:21:08 1995 ---- perl5.002beta1/embed.h Wed Nov 15 14:48:47 1995 - -Index: ext/DB_File/DB_File.pm -Updated to version 1.01. -*** perl5.001.lwall/ext/DB_File/DB_File.pm Wed Jun 7 19:46:14 1995 ---- perl5.002beta1/ext/DB_File/DB_File.pm Tue Nov 14 14:14:25 1995 - -Index: ext/DB_File/DB_File.xs -Updated to version 1.01. -*** perl5.001.lwall/ext/DB_File/DB_File.xs Wed Jun 7 19:46:17 1995 ---- perl5.002beta1/ext/DB_File/DB_File.xs Tue Nov 14 14:14:37 1995 - -Index: ext/DB_File/Makefile.PL -Updated to version 1.01. -*** perl5.001.lwall/ext/DB_File/Makefile.PL Wed Feb 22 14:36:32 1995 ---- perl5.002beta1/ext/DB_File/Makefile.PL Tue Nov 14 14:14:17 1995 - -Index: ext/DB_File/typemap -Fix typemap to avoid core dump. -*** perl5.001.lwall/ext/DB_File/typemap Tue Oct 18 12:27:52 1994 ---- perl5.002beta1/ext/DB_File/typemap Tue Oct 31 11:53:28 1995 - -Index: ext/DynaLoader/DynaLoader.pm -Add parentheses to Carp::confess call. -*** perl5.001.lwall/ext/DynaLoader/DynaLoader.pm Thu Oct 19 20:13:25 1995 ---- perl5.002beta1/ext/DynaLoader/DynaLoader.pm Fri Nov 10 11:49:00 1995 - -Index: ext/DynaLoader/dl_os2.xs -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/ext/DynaLoader/dl_os2.xs Mon Nov 13 22:58:42 1995 - -Index: ext/Fcntl/Fcntl.xs -Add O_BINARY define for OS/2. -*** perl5.001.lwall/ext/Fcntl/Fcntl.xs Mon Oct 23 14:10:54 1995 ---- perl5.002beta1/ext/Fcntl/Fcntl.xs Mon Nov 13 23:01:40 1995 - -Index: ext/GDBM_File/GDBM_File.pm -Added a tiny bit of documentation, including how to get gdbm. -Shamelessly stolen from the DB_File.pm documentation. -*** perl5.001.lwall/ext/GDBM_File/GDBM_File.pm Wed Jun 7 19:46:34 1995 ---- perl5.002beta1/ext/GDBM_File/GDBM_File.pm Mon Nov 20 10:22:26 1995 - -Index: ext/GDBM_File/GDBM_File.xs -Add gdbm_EXISTS #define. -*** perl5.001.lwall/ext/GDBM_File/GDBM_File.xs Sat Jul 1 18:44:02 1995 ---- perl5.002beta1/ext/GDBM_File/GDBM_File.xs Sat Nov 11 14:25:50 1995 - -Index: ext/NDBM_File/hints/solaris.pl -Updated for MakeMaker 5.0x. -*** perl5.001.lwall/ext/NDBM_File/hints/solaris.pl Wed Jun 7 19:46:39 1995 ---- perl5.002beta1/ext/NDBM_File/hints/solaris.pl Fri Nov 10 10:39:23 1995 - -Index: ext/ODBM_File/hints/sco.pl -Updated for MakeMaker 5.0x. -*** perl5.001.lwall/ext/ODBM_File/hints/sco.pl Wed Jun 7 19:46:44 1995 ---- perl5.002beta1/ext/ODBM_File/hints/sco.pl Fri Nov 10 10:39:32 1995 - -Index: ext/ODBM_File/hints/solaris.pl -Updated for MakeMaker 5.0x. -*** perl5.001.lwall/ext/ODBM_File/hints/solaris.pl Wed Jun 7 19:46:46 1995 ---- perl5.002beta1/ext/ODBM_File/hints/solaris.pl Fri Nov 10 10:39:44 1995 - -Index: ext/ODBM_File/hints/svr4.pl -Updated for MakeMaker 5.0x. -*** perl5.001.lwall/ext/ODBM_File/hints/svr4.pl Wed Jun 7 19:46:48 1995 ---- perl5.002beta1/ext/ODBM_File/hints/svr4.pl Fri Nov 10 10:39:54 1995 - -Index: ext/POSIX/POSIX.pm -Remove POSIX_loadlibs relics from perl5alpha days. -*** perl5.001.lwall/ext/POSIX/POSIX.pm Thu Sep 21 19:14:19 1995 ---- perl5.002beta1/ext/POSIX/POSIX.pm Wed Nov 15 14:54:09 1995 - -Index: ext/POSIX/POSIX.xs -Change whichsigname(sig) back to sig_name[sig]. -*** perl5.001.lwall/ext/POSIX/POSIX.xs Mon Oct 23 14:11:01 1995 ---- perl5.002beta1/ext/POSIX/POSIX.xs Wed Nov 15 14:56:22 1995 - -Index: ext/SDBM_File/Makefile.PL -Updated for MakeMaker 5.0x to allow compilation on non-unix systems. -*** perl5.001.lwall/ext/SDBM_File/Makefile.PL Thu Jan 19 18:59:02 1995 ---- perl5.002beta1/ext/SDBM_File/Makefile.PL Tue Nov 14 11:16:43 1995 - -Index: ext/SDBM_File/sdbm/Makefile.PL -Updated for MakeMaker 5.0x to allow compilation on non-unix systems. -*** perl5.001.lwall/ext/SDBM_File/sdbm/Makefile.PL Wed Feb 22 14:36:47 1995 ---- perl5.002beta1/ext/SDBM_File/sdbm/Makefile.PL Tue Nov 14 11:17:16 1995 - -Index: ext/SDBM_File/sdbm/sdbm.c -Include OS/2 O_BINARY flag. -Prereq: 1.16 -*** perl5.001.lwall/ext/SDBM_File/sdbm/sdbm.c Wed Jun 7 19:46:57 1995 ---- perl5.002beta1/ext/SDBM_File/sdbm/sdbm.c Mon Nov 13 23:01:41 1995 - -Index: ext/Socket/Makefile.PL -Updated to 1.3. Actually we're up to 1.4, but I forgot to update -the Makefile.PL. -*** perl5.001.lwall/ext/Socket/Makefile.PL Thu Jan 19 18:59:06 1995 ---- perl5.002beta1/ext/Socket/Makefile.PL Sat Nov 18 15:36:56 1995 - -Index: ext/Socket/Socket.pm -Updated to 1.3. Actually we're up to 1.4, but I forgot to update -the version number. This adds some non-portable stuff to manipulate -structures in <sys/un.h>. I'll have to #ifdef it out in the next -patch. - -*** perl5.001.lwall/ext/Socket/Socket.pm Sat Jul 1 15:51:54 1995 ---- perl5.002beta1/ext/Socket/Socket.pm Sat Nov 18 15:37:03 1995 - -Index: ext/Socket/Socket.xs -Updated to 1.3. Actually we're up to 1.4, but I forgot to update -the version number. This adds some non-portable stuff to manipulate -structures in <sys/un.h>. I'll have to #ifdef it out in the next -patch. - -*** perl5.001.lwall/ext/Socket/Socket.xs Sat Jul 1 15:51:56 1995 ---- perl5.002beta1/ext/Socket/Socket.xs Sat Nov 18 15:36:57 1995 - -Index: global.sym -Remove unnecessary whichsigname that was added in patch.1n. -*** perl5.001.lwall/global.sym Tue Nov 14 15:21:11 1995 ---- perl5.002beta1/global.sym Wed Nov 15 14:58:14 1995 - -Index: h2ph.PL -Converted from h2ph.SH. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/h2ph.PL Sun Nov 19 23:00:39 1995 - -Index: h2xs.PL -Converted from h2xs.SH. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/h2xs.PL Sun Nov 19 22:37:58 1995 - -Index: hints/aix.sh -Add gcc-specific -Xlinker, if you're using gcc. -*** perl5.001.lwall/hints/aix.sh Thu Oct 19 21:02:08 1995 ---- perl5.002beta1/hints/aix.sh Mon Nov 13 23:03:33 1995 - -Index: hints/freebsd.sh -Warn about possible here-document problem. -*** perl5.001.lwall/hints/freebsd.sh Sat Jul 1 18:44:07 1995 ---- perl5.002beta1/hints/freebsd.sh Sat Nov 18 16:21:20 1995 - -Index: hints/hpux.sh -Replace old hpux_9.sh, since this works for 9 and 10. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/hints/hpux.sh Mon Nov 20 09:53:28 1995 - -Index: hints/irix_6_2.sh -New hint file. This should be merged with irix_6.sh, since it's -almost identical. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/hints/irix_6_2.sh Mon Nov 20 11:16:55 1995 - -Index: hints/ncr_tower.sh -Give pointers about directory functions. -*** perl5.001.lwall/hints/ncr_tower.sh Tue Oct 18 12:33:25 1994 ---- perl5.002beta1/hints/ncr_tower.sh Tue Oct 31 11:57:51 1995 - -Index: hints/netbsd.sh -Updated. -*** perl5.001.lwall/hints/netbsd.sh Wed Jun 7 19:47:45 1995 ---- perl5.002beta1/hints/netbsd.sh Mon Nov 13 23:04:17 1995 - -Index: hints/os2.sh -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/hints/os2.sh Tue Nov 14 11:07:33 1995 - -Index: hints/sco.sh -Renamed from sco_3, since it should apply to most recent versions. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/hints/sco.sh Mon Jun 5 11:50:11 1995 - -Index: hints/solaris_2.sh -Remove temporary file try.c. -*** perl5.001.lwall/hints/solaris_2.sh Thu Oct 19 21:02:37 1995 ---- perl5.002beta1/hints/solaris_2.sh Mon Nov 20 16:01:50 1995 - -Index: hints/ultrix_4.sh -Note that you can substitute sh5 for sh to get a big speed up. -*** perl5.001.lwall/hints/ultrix_4.sh Mon Feb 13 20:15:05 1995 ---- perl5.002beta1/hints/ultrix_4.sh Sat Nov 11 17:11:41 1995 - -Index: installman -Quit if they just asked for help with -h. -*** perl5.001.lwall/installman Sat Jul 1 18:44:09 1995 ---- perl5.002beta1/installman Mon Nov 6 11:16:43 1995 - -Index: installperl -Updated to use Config rather than hand-reading config.sh again. - -Install h2ph. - -Create site_perl and site_perl/archname directories. - -*** perl5.001.lwall/installperl Sat Jul 1 18:44:12 1995 ---- perl5.002beta1/installperl Mon Nov 20 12:55:08 1995 - -Index: lib/AutoSplit.pm -Handle OS/2 backslashes. - -Tim's prototype patch. - -Less enthusiastic checking of autoloader_seen. - -*** perl5.001.lwall/lib/AutoSplit.pm Sat Jul 1 15:52:03 1995 ---- perl5.002beta1/lib/AutoSplit.pm Wed Nov 15 15:06:19 1995 - -Index: lib/Cwd.pm -Updated for Unix, NT, and OS/2. -*** perl5.001.lwall/lib/Cwd.pm Wed Jun 7 19:48:18 1995 ---- perl5.002beta1/lib/Cwd.pm Mon Nov 13 23:01:38 1995 - -Index: lib/ExtUtils/Liblist.pm -Updated to MakeMaker 5.06. -*** perl5.001.lwall/lib/ExtUtils/Liblist.pm Wed Jun 7 19:48:27 1995 ---- perl5.002beta1/lib/ExtUtils/Liblist.pm Mon Nov 13 22:03:29 1995 - -Index: lib/ExtUtils/MakeMaker.pm -Updated to MakeMaker 5.06. -Prereq: 1.21 -*** perl5.001.lwall/lib/ExtUtils/MakeMaker.pm Thu Oct 19 21:02:57 1995 ---- perl5.002beta1/lib/ExtUtils/MakeMaker.pm Sat Nov 18 16:01:05 1995 - -Index: lib/ExtUtils/Manifest.pm -Updated to MakeMaker 5.06. -*** perl5.001.lwall/lib/ExtUtils/Manifest.pm Sat Jul 1 15:52:11 1995 ---- perl5.002beta1/lib/ExtUtils/Manifest.pm Mon Nov 13 22:03:30 1995 - -Index: lib/ExtUtils/xsubpp -Updated to xsubpp-1.923. -*** perl5.001.lwall/lib/ExtUtils/xsubpp Sat Jul 1 20:08:00 1995 ---- perl5.002beta1/lib/ExtUtils/xsubpp Mon Nov 20 11:03:49 1995 - -Index: lib/File/Find.pm -OS/2 patch for nlink. -*** perl5.001.lwall/lib/File/Find.pm Sat Jul 1 15:52:13 1995 ---- perl5.002beta1/lib/File/Find.pm Wed Nov 15 15:20:03 1995 - -Index: lib/Net/Ping.pm -Updated to Net::Ping 1.00. -*** perl5.001.lwall/lib/Net/Ping.pm Wed Jun 7 19:49:13 1995 ---- perl5.002beta1/lib/Net/Ping.pm Tue Oct 31 11:15:55 1995 - -Index: lib/Shell.pm -Updated for OS/2 or Unix. -*** perl5.001.lwall/lib/Shell.pm Tue Oct 18 12:34:59 1994 ---- perl5.002beta1/lib/Shell.pm Mon Nov 13 23:01:40 1995 - -Index: lib/Test/Harness.pm -Updated for OS/2 or Unix. -*** perl5.001.lwall/lib/Test/Harness.pm Tue Oct 18 12:38:35 1994 ---- perl5.002beta1/lib/Test/Harness.pm Mon Nov 13 23:01:40 1995 - -Index: lib/Text/Tabs.pm -Updated. -*** perl5.001.lwall/lib/Text/Tabs.pm Wed Jun 7 19:49:20 1995 ---- perl5.002beta1/lib/Text/Tabs.pm Sat Nov 18 16:08:55 1995 - -Index: lib/Text/Wrap.pm -New module. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/lib/Text/Wrap.pm Sat Nov 18 16:08:56 1995 - -Index: lib/diagnostics.pm -New module. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/lib/diagnostics.pm Tue Nov 14 16:16:36 1995 - -Index: lib/lib.pm -Automatically try to load an architecture-dependent library too. -*** perl5.001.lwall/lib/lib.pm Sat Jul 1 15:51:37 1995 ---- perl5.002beta1/lib/lib.pm Fri Nov 10 16:50:43 1995 - -Index: lib/overload.pm -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/lib/overload.pm Sat Nov 18 16:03:33 1995 - -Index: lib/perl5db.pl -Emacs and OS/2 fixes. -*** perl5.001.lwall/lib/perl5db.pl Sun Mar 12 22:34:53 1995 ---- perl5.002beta1/lib/perl5db.pl Wed Nov 15 22:37:45 1995 - -Index: lib/splain -New file -- same as diagnostics.pm. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/lib/splain Tue Nov 14 16:16:36 1995 - -Index: mg.c -Remove unnecessary whichsigname introduced in 5.001n. -*** perl5.001.lwall/mg.c Tue Nov 14 15:31:03 1995 ---- perl5.002beta1/mg.c Wed Nov 15 15:44:10 1995 - -Index: minimod.PL -Made c++ friendly. -*** perl5.001.lwall/minimod.PL Mon Feb 13 20:15:47 1995 ---- perl5.002beta1/minimod.PL Sun Nov 19 23:01:02 1995 - -Index: miniperlmain.c -Made c++ friendly. -*** perl5.001.lwall/miniperlmain.c Mon Feb 13 21:48:50 1995 ---- perl5.002beta1/miniperlmain.c Sat Nov 18 15:48:10 1995 - -Index: op.c -Larry's post 5.001mx prototype patch. -*** perl5.001.lwall/op.c Tue Nov 14 20:36:08 1995 ---- perl5.002beta1/op.c Wed Nov 15 22:10:36 1995 - -Index: os2/Makefile.SH -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/Makefile.SH Tue Nov 14 11:07:32 1995 - -Index: os2/POSIX.mkfifo -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/POSIX.mkfifo Tue Nov 14 10:48:16 1995 - -Index: os2/README -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/README Tue Nov 14 14:42:13 1995 - -Index: os2/diff.Makefile -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.Makefile Tue Nov 14 11:09:29 1995 - -Index: os2/diff.configure -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.configure Sun Nov 12 01:31:34 1995 - -Index: os2/diff.installperl -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.installperl Tue Nov 14 11:09:28 1995 - -Index: os2/diff.mkdep -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.mkdep Tue Nov 14 11:09:28 1995 - -Index: os2/diff.x2pMakefile -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/diff.x2pMakefile Tue Nov 14 11:09:29 1995 - -Index: os2/os2.c -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/os2.c Tue Nov 14 11:07:33 1995 - -Index: os2/os2ish.h -New file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/os2/os2ish.h Tue Nov 14 11:07:33 1995 - -Index: perl.c -Add -h option to print out usage. - -Add 'beta' to version number. - -Add new library hierarchy. See INSTALL. - -*** perl5.001.lwall/perl.c Tue Nov 14 20:09:28 1995 ---- perl5.002beta1/perl.c Sun Nov 19 16:11:29 1995 - -Index: perl.h - -Move around some includes for OS/2. - -Check for <locale.h> - -*** perl5.001.lwall/perl.h Thu Nov 9 19:50:43 1995 ---- perl5.002beta1/perl.h Wed Nov 15 17:13:16 1995 - -Index: perldoc.PL - -Moved from perldoc.SH. Updated to handle no nroff. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/perldoc.PL Tue Nov 14 14:57:57 1995 - -Index: pod/Makefile -Updated for new pods and for new .PL format. -*** perl5.001.lwall/pod/Makefile Wed Jun 7 19:50:02 1995 ---- perl5.002beta1/pod/Makefile Mon Nov 20 13:00:50 1995 - -Index: pod/perl.pod -Updated to refer to new pods. -*** perl5.001.lwall/pod/perl.pod Thu Oct 5 19:54:43 1995 ---- perl5.002beta1/pod/perl.pod Sat Nov 18 17:23:58 1995 - -Index: pod/perlbook.pod -Updated info. -*** perl5.001.lwall/pod/perlbook.pod Wed Feb 22 18:32:35 1995 ---- perl5.002beta1/pod/perlbook.pod Sat Nov 11 17:17:23 1995 - -Index: pod/perlbot.pod -Include SUPER stuff. -*** perl5.001.lwall/pod/perlbot.pod Wed Jun 7 19:50:14 1995 ---- perl5.002beta1/pod/perlbot.pod Fri Nov 10 17:27:33 1995 - -Index: pod/perlcall.pod -Change perlapi to perlxs. -*** perl5.001.lwall/pod/perlcall.pod Wed Jun 7 19:50:17 1995 ---- perl5.002beta1/pod/perlcall.pod Tue Oct 31 15:37:57 1995 - -Index: pod/perldata.pod -Tom's updates. -*** perl5.001.lwall/pod/perldata.pod Sun Mar 12 22:35:14 1995 ---- perl5.002beta1/pod/perldata.pod Sat Nov 18 17:23:59 1995 - -Index: pod/perldiag.pod -Tom's updates. -*** perl5.001.lwall/pod/perldiag.pod Tue Nov 14 22:04:11 1995 ---- perl5.002beta1/pod/perldiag.pod Sun Nov 19 22:10:58 1995 - -Index: pod/perldsc.pod -Tom's updates. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/perldsc.pod Sat Nov 18 17:24:22 1995 - -Index: pod/perlform.pod -Tom's updates. -*** perl5.001.lwall/pod/perlform.pod Wed Feb 22 18:32:41 1995 ---- perl5.002beta1/pod/perlform.pod Sat Nov 18 17:23:59 1995 - -Index: pod/perlfunc.pod -Tom's updates. -*** perl5.001.lwall/pod/perlfunc.pod Tue Nov 14 15:31:33 1995 ---- perl5.002beta1/pod/perlfunc.pod Sat Nov 18 17:24:01 1995 - -Index: pod/perlguts.pod -Change perlapi to perlxs. -*** perl5.001.lwall/pod/perlguts.pod Wed Jun 7 19:50:25 1995 ---- perl5.002beta1/pod/perlguts.pod Tue Oct 31 15:38:18 1995 - -Index: pod/perlipc.pod -New file from Tom. -*** perl5.001.lwall/pod/perlipc.pod Wed Feb 22 18:32:48 1995 ---- perl5.002beta1/pod/perlipc.pod Sat Nov 18 17:24:02 1995 - -Index: pod/perllol.pod -New file from Tom. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/perllol.pod Sat Nov 18 17:24:22 1995 - -Index: pod/perlmod.pod -Updates from Tom. -*** perl5.001.lwall/pod/perlmod.pod Wed Feb 22 18:32:51 1995 ---- perl5.002beta1/pod/perlmod.pod Sat Nov 18 17:24:03 1995 - -Index: pod/perlop.pod -Add missing '>'. -*** perl5.001.lwall/pod/perlop.pod Tue Nov 14 15:31:37 1995 ---- perl5.002beta1/pod/perlop.pod Sat Nov 18 17:24:03 1995 - -Index: pod/perlpod.pod -Add note about =cut operator. -*** perl5.001.lwall/pod/perlpod.pod Tue Oct 18 12:39:53 1994 ---- perl5.002beta1/pod/perlpod.pod Sun Nov 19 22:22:59 1995 - -Index: pod/perlref.pod -Updates from Tom. -*** perl5.001.lwall/pod/perlref.pod Tue Mar 7 00:56:46 1995 ---- perl5.002beta1/pod/perlref.pod Sat Nov 18 17:24:04 1995 - -Index: pod/perlsyn.pod -Updates from Tom. -*** perl5.001.lwall/pod/perlsyn.pod Sat Mar 11 14:13:48 1995 ---- perl5.002beta1/pod/perlsyn.pod Sat Nov 18 17:24:04 1995 - -Index: pod/perlxs.pod -Updated. -*** perl5.001.lwall/pod/perlxs.pod Tue Nov 14 15:31:42 1995 ---- perl5.002beta1/pod/perlxs.pod Sun Nov 19 22:12:44 1995 - -Index: pod/perlxstut.pod -New file from Jeff. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/perlxstut.pod Mon Nov 20 13:02:12 1995 - -Index: pod/pod2html.PL -Updated -- version 1.15 merges Tom's suggestions and ideas from -pod2fm. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/pod2html.PL Sun Nov 19 22:11:59 1995 - -Index: pod/pod2latex.PL -Changed to a .PL file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/pod2latex.PL Wed Nov 15 22:32:39 1995 - -Index: pod/pod2man.PL -Changed to a .PL file. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/pod/pod2man.PL Wed Nov 15 22:32:51 1995 - -Index: pp_ctl.c -Add OS/2 stuff. -*** perl5.001.lwall/pp_ctl.c Wed Nov 15 00:37:25 1995 ---- perl5.002beta1/pp_ctl.c Wed Nov 15 21:46:37 1995 - -Index: pp_sys.c -Add OS/2 stuff. -*** perl5.001.lwall/pp_sys.c Tue Nov 14 21:03:06 1995 ---- perl5.002beta1/pp_sys.c Wed Nov 15 21:51:33 1995 - -Index: proto.h -Add OS/2 stuff to better protect MYMALLOC. -*** perl5.001.lwall/proto.h Tue Nov 14 21:01:28 1995 ---- perl5.002beta1/proto.h Wed Nov 15 21:55:23 1995 - -Index: t/TEST -Add OS/2 check for perl.exe. -*** perl5.001.lwall/t/TEST Sat Jan 14 19:35:33 1995 ---- perl5.002beta1/t/TEST Tue Nov 14 11:22:08 1995 - -Index: t/lib/db-btree.t -Updated. -*** perl5.001.lwall/t/lib/db-btree.t Tue Oct 18 12:44:05 1994 ---- perl5.002beta1/t/lib/db-btree.t Tue Oct 31 11:53:29 1995 - -Index: t/op/overload.t -Updated. -*** perl5.001.lwall/t/op/overload.t Tue Nov 14 20:56:57 1995 ---- perl5.002beta1/t/op/overload.t Mon Nov 20 15:48:56 1995 - -Index: t/op/stat.t -Add note about tmpfs failures. -*** perl5.001.lwall/t/op/stat.t Tue Oct 18 12:46:23 1994 ---- perl5.002beta1/t/op/stat.t Wed Nov 15 22:00:50 1995 - -Index: toke.c -Patch from Paul M. for source filters. -*** perl5.001.lwall/toke.c Tue Nov 14 21:59:50 1995 ---- perl5.002beta1/toke.c Wed Nov 15 22:08:23 1995 - -Index: util.c -Varargs fixes. -*** perl5.001.lwall/util.c Wed Jun 7 19:51:19 1995 ---- perl5.002beta1/util.c Tue Nov 14 10:46:37 1995 - -Index: writemain.SH -Make c++ friendly. -*** perl5.001.lwall/writemain.SH Wed Feb 8 19:44:20 1995 ---- perl5.002beta1/writemain.SH Sat Nov 18 15:51:55 1995 - -Index: x2p/Makefile.SH -Updated for .PL extraction. -*** perl5.001.lwall/x2p/Makefile.SH Wed Jun 7 19:51:37 1995 ---- perl5.002beta1/x2p/Makefile.SH Sun Nov 19 23:17:39 1995 - -Index: x2p/a2p.h -Add OS/2 stuff. -*** perl5.001.lwall/x2p/a2p.h Thu Oct 19 21:03:58 1995 ---- perl5.002beta1/x2p/a2p.h Tue Nov 14 10:46:57 1995 - -Index: x2p/cflags.SH -Add .obj for OS/2. -*** perl5.001.lwall/x2p/cflags.SH Tue Oct 18 12:47:34 1994 ---- perl5.002beta1/x2p/cflags.SH Tue Nov 14 15:18:27 1995 - -Index: x2p/find2perl.PL -Changed from .SH to .PL. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/x2p/find2perl.PL Sun Nov 19 23:11:58 1995 - -Index: x2p/s2p.PL -Changed from .SH to .PL extraction. -*** /dev/null Mon Nov 20 17:28:51 1995 ---- perl5.002beta1/x2p/s2p.PL Sun Nov 19 23:14:59 1995 - -------------- -Version 5.001 -------------- - -Summary of user-visible Configure and build changes since 5.000: - -A large number of enhancements and fixes have been made to the -Configure and build process for perl. Most of these will not be -visible to the ordinary user--they just make the process more robust -and likely to work on a wider range of platforms. - -This is a brief summary of the most important changes. - -Configure changes: - New and improved Configure command line options. -O now overrides - config.sh settings. -D options can now include spaces, if - protected in quotes (e.g. -Dcc='gcc -posix'). Type Configure -h - for a full listing of options. - - Users can now turn on the defaults for the rest of Configure by - typing &-d at any Configure prompt. This is useful if you just - want to change one or two answers. - - Support on (non-Sun) SVR4 systems for dynamic loading and shared - libperl.so - - Numerous new or updated hints files: PowerUnix, aix 3.x and 4.x, - bsd386, convexos, cxux, DEC OSF, Esix, FreeBSD, HP-UX (especially if - you're using the bundled compiler), irix 4.x, 5.x, and 6.x, Linux, - MPE/IX, NeXT 3.0 and 3.2, Solaris, SVR4, Ultrix (especially 4.3), - and Unicos. - - Improved generation of a suitable name for architecture-dependent - library files. NOTE: This may differ from the name you had from - your 5.000 installation. - - Many many portability enhancements and fixes. - -Build process: - - The process for building extensions has been extensively revised. See - lib/ExtUtils/MakeMaker.pm for complete documentation. Basically, with - just a simple Makefile.PL (such as the one generated by h2xs), you can - now build an extension from anywhere on your system, even if you've - deleted the perl source. - - Improved build/install documentation in README. A little. - - Improved dynamic loading on HP-UX. Support dynamic loading on SVR4. - - Installperl now gets the version correct :-) - - Installperl now saves the perl *.h files and the libperl.a library - in your architecture-dependent library directory so that you can - later build extensions without having to re-install the perl - source. - - Include x2p/a2p.c generated by byacc from x2p/a2p.y. - - Many many portability fixes. - -Upgrade Traps and Pitfalls: - -Since a lot has changed in the build process, you are probably best -off starting with a fresh copy of the perl5.000 sources. In particular, -your 5.000 config.sh will contain several variables that are no longer -needed. Further, improvements in the Configure tests may mean that some -of the answers will be different than they were in 5.000, and which answer -to keep can be difficult to sort out. Therefore, you are probably -better off ignoring your old config.sh. - -One big change is that architecture-dependent library files may well -be stored in a different location in 5.001. This is because the default -name used in the 5.000 release was not sufficiently specific to -distinguish incompatible architectures. The relevant variable is $archlib -in config.sh. Before you run ``make install'' you should rename your old -$archlib. Thus if your $archlib for version 5.000 was -/usr/local/lib/perl5/foo, and your new value for 5.001 is -/usr/local/lib/perl5/foo-bar, then you should - mv /usr/local/lib/perl5/foo /usr/local/lib/perl5/foo-bar -before running ``make install''. - -Alternatively, you could override Configure's default guess for $archlib -either by sh Configure -Darchname='foo', or by answering 'foo' when -prompted by Configure for the architecture name. - -The following is the sequence of steps to upgrade to 5.001: - cd perl5.000 - make realclean - rm config.sh - <apply 5.001 patch> - sh Configure - make depend - make - make test - <mv old architecture-dependent library to new location, if needed> - make install - diff --git a/Makefile.SH b/Makefile.SH index a31db2ada2..a31db2ada2 100644..100755 --- a/Makefile.SH +++ b/Makefile.SH diff --git a/configure b/configure index 29e7d351b4..29e7d351b4 100644..100755 --- a/configure +++ b/configure diff --git a/ext/POSIX/mkposixman.pl b/ext/POSIX/mkposixman.pl deleted file mode 100755 index 3daa1bff7b..0000000000 --- a/ext/POSIX/mkposixman.pl +++ /dev/null @@ -1,1134 +0,0 @@ -#!/tmp/perl5 -w -#!/tmp/perl5 - -# Ramrodded by Dean Roehrich. -# -# Submissions for function descriptions are needed. Don't write a tutorial, -# and don't repeat things that can be found in the system's manpages, -# just give a quick 2-3 line note and a one-line example. -# -# Check the latest version of the Perl5 Module List for Dean's current -# email address (listed as DMR). -# -my $VERS = 951129; # yymmdd - -local *main::XS; -local *main::PM; - -open( XS, "<POSIX.xs" ) || die "Unable to open POSIX.xs"; -open( PM, "<POSIX.pm" ) || die "Unable to open POSIX.pm"; -close STDOUT; -open( STDOUT, ">POSIX.pod" ) || die "Unable to open POSIX.pod"; - -print <<'EOQ'; -=head1 NAME - -POSIX - Perl interface to IEEE Std 1003.1 - -=head1 SYNOPSIS - - use POSIX; - use POSIX qw(setsid); - use POSIX qw(:errno_h :fcntl_h); - - printf "EINTR is %d\n", EINTR; - - $sess_id = POSIX::setsid(); - - $fd = POSIX::open($path, O_CREAT|O_EXCL|O_WRONLY, 0644); - # note: that's a filedescriptor, *NOT* a filehandle - -=head1 DESCRIPTION - -The POSIX module permits you to access all (or nearly all) the standard -POSIX 1003.1 identifiers. Many of these identifiers have been given Perl-ish -interfaces. Things which are C<#defines> in C, like EINTR or O_NDELAY, are -automatically exported into your namespace. All functions are only exported -if you ask for them explicitly. Most likely people will prefer to use the -fully-qualified function names. - -This document gives a condensed list of the features available in the POSIX -module. Consult your operating system's manpages for general information on -most features. Consult L<perlfunc> for functions which are noted as being -identical to Perl's builtin functions. - -The first section describes POSIX functions from the 1003.1 specification. -The second section describes some classes for signal objects, TTY objects, -and other miscellaneous objects. The remaining sections list various -constants and macros in an organization which roughly follows IEEE Std -1003.1b-1993. - -=head1 NOTE - -The POSIX module is probably the most complex Perl module supplied with -the standard distribution. It incorporates autoloading, namespace games, -and dynamic loading of code that's in Perl, C, or both. It's a great -source of wisdom. - -=head1 CAVEATS - -A few functions are not implemented because they are C specific. If you -attempt to call these, they will print a message telling you that they -aren't implemented, and suggest using the Perl equivalent should one -exist. For example, trying to access the setjmp() call will elicit the -message "setjmp() is C-specific: use eval {} instead". - -Furthermore, some evil vendors will claim 1003.1 compliance, but in fact -are not so: they will not pass the PCTS (POSIX Compliance Test Suites). -For example, one vendor may not define EDEADLK, or the semantics of the -errno values set by open(2) might not be quite right. Perl does not -attempt to verify POSIX compliance. That means you can currently -successfully say "use POSIX", and then later in your program you find -that your vendor has been lax and there's no usable ICANON macro after -all. This could be construed to be a bug. - -EOQ - -use strict; - - -my $constants = {}; -my $macros = {}; -my $packages = []; -my $posixpack = Package->new( 'POSIX' ); -my $descriptions = Description->new; - -get_constants( 'XS', $constants, $macros ); -get_functions( 'XS', $packages, $posixpack ); -get_PMfunctions( 'PM', $packages, $posixpack, $descriptions ); - - -# It is possible that the matches of setup_*() may depend on -# the matches of an earlier setup_*(). If you change the order, -# be careful that you're getting only what you want, and no more. -# -my $termios_flags = setup_termios( $constants ); -my $wait_stuff = setup_wait( $constants, $macros ); -my $stat = setup_file_char( $constants, $macros ); -my $port = setup_pat( $constants, '^_POSIX' ); -my $sc = setup_pat( $constants, '^_SC_' ); -my $pc = setup_pat( $constants, '^_PC_' ); -my $fcntl = setup_pat( $constants, '^([FO]_|FD_)' ); -my $sigs = setup_pat( $constants, '^(SIG|SA_)' ); -my $float = setup_pat( $constants, '^(L?DBL_|FLT_)' ); -my $locale = setup_pat( $constants, '^LC_' ); -my $stdio = setup_pat( $constants, '(^BUFSIZ$)|(^L_)|(^_IO...$)|(^EOF$)|(^FILENAME_MAX$)|(^TMP_MAX$)' ); -my $stdlib = setup_pat( $constants, '(^EXIT_)|(^MB_CUR_MAX$)|(^RAND_MAX$)' ); -my $limits = setup_pat( $constants, '(_MAX$)|(_MIN$)|(_BIT$)|(^MAX_)|(_BUF$)' ); -my $math = setup_pat( $constants, '^HUGE_VAL$' ); -my $time = setup_pat( $constants, '^CL' ); -my $unistd = setup_pat( $constants, '(_FILENO$)|(^SEEK_...$)|(^._OK$)' ); -my $errno = setup_pat( $constants, '^E' ); - -print_posix( $posixpack, $descriptions ); -print_classes( $packages, $constants, $termios_flags, $descriptions ); -print_misc( 'Pathname Constants', $pc ); -print_misc( 'POSIX Constants', $port ); -print_misc( 'System Configuration', $sc ); -print_misc( 'Errno', $errno ); -print_misc( 'Fcntl', $fcntl ); -print_misc( 'Float', $float ); -print_misc( 'Limits', $limits ); -print_misc( 'Locale', $locale ); -print_misc( 'Math', $math ); -print_misc( 'Signal', $sigs ); -print_misc( 'Stat', $stat ); -print_misc( 'Stdlib', $stdlib ); -print_misc( 'Stdio', $stdio ); -print_misc( 'Time', $time ); -print_misc( 'Unistd', $unistd ); -print_misc( 'Wait', $wait_stuff ); - -print_vers( $VERS ); - -dregs( $macros, $constants ); - -exit(0); - -Unimplemented. - -sub dregs { - my $macros = shift; - my $constants = shift; - - foreach (keys %$macros){ - warn "Unknown macro $_ in the POSIX.xs module.\n"; - } - foreach (keys %$constants){ - warn "Unknown constant $_ in the POSIX.xs module.\n"; - } -} - -sub get_constants { - no strict 'refs'; - my $fh = shift; - my $constants = shift; - my $macros = shift; - my $v; - - while(<$fh>){ - last if /^constant/; - } - while(<$fh>){ # }{{ - last if /^}/; - if( /return\s+([^;]+)/ ){ - $v = $1; - # skip non-symbols - if( $v !~ /^\d+$/ ){ - # remove any C casts - $v =~ s,\(.*?\)\s*(\w),$1,; - # is it a macro? - if( $v =~ s/(\(.*?\))// ){ - $macros->{$v} = $1; - } - else{ - $constants->{$v} = 1; - } - } - } - } -} - -Close the file. This uses file descriptors such as those obtained by calling -C<POSIX::open>. - - $fd = POSIX::open( "foo", &POSIX::O_RDONLY ); - POSIX::close( $fd ); - -sub get_functions { - no strict 'refs'; - my $fh = shift; - my $packages = shift; - my $posixpack = shift; - my $header = 0; - my $pack = ''; - my $prefix = ''; - my( $x, $y ); - my( $curfuncs, $curpack ); - my $ret; - - while(<$fh>){ - if( /^MODULE.*?PACKAGE\s*=\s*([^\s]+)/ ){ - $pack = $1; - $prefix = ''; - if( /PREFIX\s*=\s*([^\n]+)/ ){ - $prefix = $1; - } - #print "package($pack) prefix($prefix)\n"; - if( $pack eq 'POSIX' ){ - $curpack = $posixpack; - } - else{ - $curpack = Package->new( $pack ); - push @$packages, $curpack; - } - $curfuncs = $curpack->curfuncs; - next; - } - - chop; - # find function header - if( /^[^\s]/ && ! /^#/ ){ - $ret = /^SysRet/ ? 2 : 1; - chop($x = <$fh>); - next if( $pack eq 'POSIX' and $x =~ /^constant/ ); - $x =~ /^(.*?)\s*\((.*?)\)/; - ($x,$y) = ($1, $2); # func,sig - $x =~ s/^$prefix//; - $curfuncs->{$x} = $ret; - ++$header - } - # leave function header - else{ - $header = 0; - } - } -} - - -sub get_PMfunctions { - no strict 'refs'; - my $fh = shift; - my $packages = shift; - my $posixpack = shift; - my $desc = shift; - my $pack = ''; - my( $curfuncs, $curpack ); - my $y; - my $x; - my $sub = ''; - - # find the second package statement. - while(<$fh>){ - if( /^package\s+(.*?);/ ){ - $pack = $1; - last if $pack ne 'POSIX'; - } - } - - # Check if this package is already - # being used. - $curpack = ''; - foreach (@$packages){ - if( $_->name eq $pack ){ - $curpack = $_; - last; - } - } - # maybe start a new package. - if( $curpack eq '' ){ - $curpack = Package->new( $pack ); - push @$packages, $curpack; - } - $curfuncs = $curpack->curfuncs; - - # now fetch functions - while(<$fh>){ - if( /^package\s+(.*?);/ ){ - $pack = $1; - if( $pack eq 'POSIX' ){ - $curpack = $posixpack; - } - else{ - # Check if this package is already - # being used. - $curpack = ''; - foreach (@$packages){ - if( $_->name() eq $pack ){ - $curpack = $_; - last; - } - } - # maybe start a new package. - if( $curpack eq '' ){ - $curpack = Package->new( $pack ); - push @$packages, $curpack; - } - } - $curfuncs = $curpack->curfuncs; - next; - } - if( /^sub\s+(.*?)\s/ ){ - $sub = $1; - - # special cases - if( $pack eq 'POSIX::SigAction' and - $sub eq 'new' ){ - $curfuncs->{$sub} = 1; - } - elsif( $pack eq 'POSIX' and $sub eq 'perror' ){ - $curfuncs->{$sub} = 1; - } - - next; - } - if( /usage.*?\((.*?)\)/ ){ - $y = $1; - $curfuncs->{$sub} = 1; - next; - } - if( /^\s+unimpl\s+"(.*?)"/ ){ - $y = $1; - $y =~ s/, stopped//; - $desc->append( $pack, $sub, $y ); - $curfuncs->{$sub} = 1; - next; - } - if( /^\s+redef\s+"(.*?)"/ ){ - $x = $1; - $y = "Use method C<$x> instead"; - $desc->append( $pack, $sub, $y ); - $curfuncs->{$sub} = 1; - next; - } - } -} - -Retrieves the value of a configurable limit on a file or directory. This -uses file descriptors such as those obtained by calling C<POSIX::open>. - -The following will determine the maximum length of the longest allowable -pathname on the filesystem which holds C</tmp/foo>. - - $fd = POSIX::open( "/tmp/foo", &POSIX::O_RDONLY ); - $path_max = POSIX::fpathconf( $fd, &POSIX::_PC_PATH_MAX ); -Return the mantissa and exponent of a floating-point number. - - ($mantissa, $exponent) = POSIX::frexp( 3.14 ); -Get file status. This uses file descriptors such as those obtained by -calling C<POSIX::open>. The data returned is identical to the data from -Perl's builtin C<stat> function. - - $fd = POSIX::open( "foo", &POSIX::O_RDONLY ); - @stats = POSIX::fstat( $fd ); - -sub print_posix { - my $pack = shift; - my $desc = shift; - - print "=head1 FUNCTIONS\n\n"; - print "=over 8\n\n"; - dumpfuncs( $pack, $desc ); - print "=back\n\n"; -} - -sub print_classes { - my $packages = shift; - my $constants = shift; - my $termios = shift; - my $desc = shift; - my $pack; - my @pkgs; - - print "=head1 CLASSES\n\n"; - @pkgs = sort { $main::a->name() cmp $main::b->name() } @$packages; - while( @pkgs ){ - $pack = shift @pkgs; - print "=head2 ", $pack->name(), "\n\n"; - print "=over 8\n\n"; - - dumpfuncs( $pack, $desc ); - - if( $pack->name() =~ /termios/i ){ - dumpflags( $termios ); - } - print "=back\n\n"; - } -} - -sub setup_termios { - my $constants = shift; - my $obj; - - $obj = { - 'c_iflag field' => [qw( BRKINT ICRNL IGNBRK IGNCR IGNPAR - INLCR INPCK ISTRIP IXOFF IXON - PARMRK )], - 'c_oflag field' => [qw( OPOST )], - 'c_cflag field' => [qw( CLOCAL CREAD CSIZE CS5 CS6 CS7 CS8 - CSTOPB HUPCL PARENB PARODD )], - 'c_lflag field' => [qw( ECHO ECHOE ECHOK ECHONL ICANON - IEXTEN ISIG NOFLSH TOSTOP )], - 'c_cc field' => [qw( VEOF VEOL VERASE VINTR VKILL VQUIT - VSUSP VSTART VSTOP VMIN VTIME NCCS )], - 'Baud rate' => [], - 'Terminal interface' => [], - }; - # look for baud rates in constants, add to termios - foreach (keys %$constants){ - if( /^B\d+$/ ){ - push @{$obj->{'Baud rate'}}, $_; - } - } - # look for TC* in constants, add to termios - foreach (keys %$constants){ - if( /^TC/ ){ - push @{$obj->{'Terminal interface'}}, $_; - } - } - # trim the constants - foreach (keys %$obj){ - trim_hash( 'Constant', $obj->{$_}, $constants ); - } - return $obj; -} - - -sub dumpfuncs { - my $pack = shift; - my $desc = shift; - my $curfuncs = $pack->curfuncs; - my $pname = $pack->name; - my $func; - my @funcs = sort keys %$curfuncs; - - if( exists $curfuncs->{'new'} ){ # do new first - @funcs = grep( $_ ne 'new', @funcs ); - unshift @funcs, 'new'; - } - while( @funcs ){ - $func = shift @funcs; - if( $func eq 'DESTROY' ){ - next; # don't do DESTROY - } - print "=item $func\n\n"; - if( $desc->print( $pname, $func, $curfuncs->{$func} ) ){ - # if it was printed, note that - delete $curfuncs->{$func}; - } - } -} - -sub dumpflags { - my $flags = shift; - my $field; - - foreach $field (sort keys %$flags){ - print "=item $field values\n\n"; - print join( ' ', @{$flags->{$field}} ), "\n\n"; - } -} - -sub setup_wait { - my $constants = shift; - my $macros = shift; - my $obj; - - $obj = { - 'Macros' => [qw( WIFEXITED WEXITSTATUS WIFSIGNALED - WTERMSIG WIFSTOPPED WSTOPSIG )], - 'Constants' => [qw( WNOHANG WUNTRACED )], - }; - trim_hash( 'Constant', $obj->{Constants}, $constants ); - trim_hash( 'Macro', $obj->{Macros}, $macros ); - return $obj; -} - -sub setup_file_char { - my $constants = shift; - my $macros = shift; - my $obj; - - $obj = { - 'Macros' => [], - 'Constants' => [], - }; - # find S_* constants and add to object. - foreach (sort keys %$constants){ - if( /^S_/ ){ - push @{$obj->{'Constants'}}, $_; - } - } - # find S_* macros and add to object. - foreach (sort keys %$macros){ - if( /^S_/ ){ - push @{$obj->{'Macros'}}, $_; - } - } - # trim the hashes - trim_hash( 'Constant', $obj->{Constants}, $constants ); - trim_hash( 'Macro', $obj->{Macros}, $macros ); - return $obj; -} - - -sub setup_pat { - my $constants = shift; - my $pat = shift; - my $obj; - - $obj = { 'Constants' => [] }; - foreach (sort keys %$constants){ - if( /$pat/ ){ - push @{$obj->{'Constants'}}, $_; - } - } - trim_hash( 'Constant', $obj->{Constants}, $constants ); - return $obj; -} - -Get numeric formatting information. Returns a reference to a hash -containing the current locale formatting values. - -The database for the B<de> (Deutsch or German) locale. - - $loc = POSIX::setlocale( &POSIX::LC_ALL, "de" ); - print "Locale = $loc\n"; - $lconv = POSIX::localeconv(); - print "decimal_point = ", $lconv->{decimal_point}, "\n"; - print "thousands_sep = ", $lconv->{thousands_sep}, "\n"; - print "grouping = ", $lconv->{grouping}, "\n"; - print "int_curr_symbol = ", $lconv->{int_curr_symbol}, "\n"; - print "currency_symbol = ", $lconv->{currency_symbol}, "\n"; - print "mon_decimal_point = ", $lconv->{mon_decimal_point}, "\n"; - print "mon_thousands_sep = ", $lconv->{mon_thousands_sep}, "\n"; - print "mon_grouping = ", $lconv->{mon_grouping}, "\n"; - print "positive_sign = ", $lconv->{positive_sign}, "\n"; - print "negative_sign = ", $lconv->{negative_sign}, "\n"; - print "int_frac_digits = ", $lconv->{int_frac_digits}, "\n"; - print "frac_digits = ", $lconv->{frac_digits}, "\n"; - print "p_cs_precedes = ", $lconv->{p_cs_precedes}, "\n"; - print "p_sep_by_space = ", $lconv->{p_sep_by_space}, "\n"; - print "n_cs_precedes = ", $lconv->{n_cs_precedes}, "\n"; - print "n_sep_by_space = ", $lconv->{n_sep_by_space}, "\n"; - print "p_sign_posn = ", $lconv->{p_sign_posn}, "\n"; - print "n_sign_posn = ", $lconv->{n_sign_posn}, "\n"; -Move the read/write file pointer. This uses file descriptors such as -those obtained by calling C<POSIX::open>. - - $fd = POSIX::open( "foo", &POSIX::O_RDONLY ); - $off_t = POSIX::lseek( $fd, 0, &POSIX::SEEK_SET ); - -sub print_vers { - my $vers = shift; - - print "=head1 CREATION\n\n"; - print "This document generated by $0 version $vers.\n\n"; -} - -sub print_misc { - my $hdr = shift; - my $obj = shift; - my $item; - - print "=head1 ", uc($hdr), "\n\n"; - print "=over 8\n\n"; - foreach $item (sort keys %$obj){ - print "=item $item\n\n"; - print join( ' ', @{$obj->{$item}}), "\n\n"; - } - print "=back\n\n"; -} - -sub trim_hash { - my $name = shift; - my $av = shift; - my $hv = shift; - - foreach (@$av){ - if( exists $hv->{$_} ){ - delete $hv->{$_}; - } - else{ - warn "$name $_ is not in the POSIX.xs module"; - } - } -} - -{ package Package; ## Package package - - sub new { - my $type = shift; - my $pack = shift || die; - my $self = [ $pack, {} ]; - bless $self, $type; - } - sub name { - my $self = shift; - $self->[0]; - } - sub curfuncs { - my $self = shift; - $self->[1]; - } - sub DESTROY { - my $self = shift; - my $pack = $self->name; - foreach (keys %{$self->curfuncs}){ - if( $_ eq 'DESTROY' ){ - next; # don't expect much on DESTROY - } - warn "Function ". $pack . "::$_ did not have a description.\n"; - } - } -} -{ package Description; ## Function description - - sub new { - my $type = shift; - my $self = {}; - bless $self, $type; - $self->fetch; - return $self; - } - sub fetch { - my $self = shift; - my $pack = ''; - my $c; - my( $sub, $as ); - - while(<main::DATA>){ - next if /^#/; - $sub = $as = ''; - if( /^==(.*)/ ){ - $pack = $1; - next; - } - if( /^=([^\+]+)\+\+/ ){ - $sub = $1; - $as = $sub; - } - elsif( /^=([^\+]+)\+C/ ){ - $sub = $1; - $as = 'C'; - } - elsif( /^=([^\+]+)\+(\w+)/ ){ - $sub = $1; - $as = $2; - } - elsif( /^=(.*)/ ){ - $sub = $1; - } - - if( $sub ne '' ){ - $sub = $1; - $self->{$pack."::$sub"} = ''; - $c = \($self->{$pack."::$sub"}); - if( $as eq 'C' ){ - $$c .= "This is identical to the C function C<$sub()>.\n"; - } - elsif( $as ne '' ){ - $$c .= "This is identical to Perl's builtin C<$as()> function.\n"; - } - next; - } - $$c .= $_; - } - } - sub DESTROY { - my $self = shift; - foreach (keys %$self){ - warn "Function $_ is not in the POSIX.xs module.\n"; - } - } - sub append { - my $self = shift; - my $pack = shift; - my $sub = shift; - my $str = shift || die; - - if( exists $self->{$pack."::$sub"} ){ - $self->{$pack."::$sub"} .= "\n$str.\n"; - } - else{ - $self->{$pack."::$sub"} = "$str.\n"; - } - } - sub print { - my $self = shift; - my $pack = shift; - my $sub = shift; - my $rtype = shift || die; - my $ret = 0; - - if( exists $self->{$pack."::$sub"} ){ - if( $rtype > 1 ){ - $self->{$pack."::$sub"} =~ s/identical/similar/; - } - print $self->{$pack."::$sub"}, "\n"; - delete $self->{$pack."::$sub"}; - if( $rtype > 1 ){ - print "Returns C<undef> on failure.\n\n"; - } - $ret = 1; - } - $ret; - } -} - -Create an interprocess channel. This returns file descriptors like those -returned by C<POSIX::open>. - - ($fd0, $fd1) = POSIX::pipe(); - POSIX::write( $fd0, "hello", 5 ); - POSIX::read( $fd1, $buf, 5 ); -Read from a file. This uses file descriptors such as those obtained by -calling C<POSIX::open>. If the buffer C<$buf> is not large enough for the -read then Perl will extend it to make room for the request. - - $fd = POSIX::open( "foo", &POSIX::O_RDONLY ); - $bytes = POSIX::read( $fd, $buf, 3 ); -This is similar to the C function C<setpgid()>. -Detailed signal management. This uses C<POSIX::SigAction> objects for the -C<action> and C<oldaction> arguments. Consult your system's C<sigaction> -manpage for details. - -Synopsis: - - sigaction(sig, action, oldaction = 0) -Install a signal mask and suspend process until signal arrives. This uses -C<POSIX::SigSet> objects for the C<signal_mask> argument. Consult your -system's C<sigsuspend> manpage for details. - -Synopsis: - - sigsuspend(signal_mask) -This is identical to Perl's builtin C<sprintf()> function. -Convert date and time information to string. Returns the string. - -Synopsis: - - strftime(fmt, sec, min, hour, mday, mon, year, wday = 0, yday = 0, isdst = 0) - -The month (C<mon>), weekday (C<wday>), and yearday (C<yday>) begin at zero. -I.e. January is 0, not 1; Sunday is 0, not 1; January 1st is 0, not 1. The -year (C<year>) is given in years since 1900. I.e. The year 1995 is 95; the -year 2001 is 101. Consult your system's C<strftime()> manpage for details -about these and the other arguments. - -The string for Tuesday, December 12, 1995. - - $str = POSIX::strftime( "%A, %B %d, %Y", 0, 0, 0, 12, 11, 95, 2 ); - print "$str\n"; -String transformation. Returns the transformed string. - - $dst = POSIX::strxfrm( $src ); -Get name of current operating system. - - ($sysname, $nodename, $release, $version, $machine ) = POSIX::uname(); -Returns the current file position, in bytes. - - $pos = $fh->tell; -Get terminal control attributes. - -Obtain the attributes for stdin. - - $termios->getattr() - -Obtain the attributes for stdout. - - $termios->getattr( 1 ) -Set terminal control attributes. - -Set attributes immediately for stdout. - - $termios->setattr( 1, &POSIX::TCSANOW ); - -__END__ -########## -==POSIX::SigSet -=new -Create a new SigSet object. This object will be destroyed automatically -when it is no longer needed. Arguments may be supplied to initialize the -set. - -Create an empty set. - - $sigset = POSIX::SigSet->new; - -Create a set with SIGUSR1. - - $sigset = POSIX::SigSet->new( &POSIX::SIGUSR1 ); -=addset -Add a signal to a SigSet object. - - $sigset->addset( &POSIX::SIGUSR2 ); -=delset -Remove a signal from the SigSet object. - - $sigset->delset( &POSIX::SIGUSR2 ); -=emptyset -Initialize the SigSet object to be empty. - - $sigset->emptyset(); -=fillset -Initialize the SigSet object to include all signals. - - $sigset->fillset(); -=ismember -Tests the SigSet object to see if it contains a specific signal. - - if( $sigset->ismember( &POSIX::SIGUSR1 ) ){ - print "contains SIGUSR1\n"; - } -########## -==POSIX::Termios -=new -Create a new Termios object. This object will be destroyed automatically -when it is no longer needed. - - $termios = POSIX::Termios->new; -=getiflag -Retrieve the c_iflag field of a termios object. - - $c_iflag = $termios->getiflag; -=getoflag -Retrieve the c_oflag field of a termios object. - - $c_oflag = $termios->getoflag; -=getcflag -Retrieve the c_cflag field of a termios object. - - $c_cflag = $termios->getcflag; -=getlflag -Retrieve the c_lflag field of a termios object. - - $c_lflag = $termios->getlflag; -=getcc -Retrieve a value from the c_cc field of a termios object. The c_cc field is -an array so an index must be specified. - - $c_cc[1] = $termios->getcc(1); -=getospeed -Retrieve the output baud rate. - - $ospeed = $termios->getospeed; -=getispeed -Retrieve the input baud rate. - - $ispeed = $termios->getispeed; -=setiflag -Set the c_iflag field of a termios object. - - $termios->setiflag( &POSIX::BRKINT ); -=setoflag -Set the c_oflag field of a termios object. - - $termios->setoflag( &POSIX::OPOST ); -=setcflag -Set the c_cflag field of a termios object. - - $termios->setcflag( &POSIX::CLOCAL ); -=setlflag -Set the c_lflag field of a termios object. - - $termios->setlflag( &POSIX::ECHO ); -=setcc -Set a value in the c_cc field of a termios object. The c_cc field is an -array so an index must be specified. - - $termios->setcc( 1, &POSIX::VEOF ); -=setospeed -Set the output baud rate. - - $termios->setospeed( &POSIX::B9600 ); -=setispeed -Set the input baud rate. - - $termios->setispeed( &POSIX::B9600 ); -## -=setattr -=getattr -########## -==FileHandle -=new -=new_from_fd -=flush -=getc -=ungetc -=seek -=setbuf -=error -=clearerr -=tell -=getpos -=gets -=close -=new_tmpfile -=eof -=fileno -=setpos -=setvbuf -########## -==POSIX -=tolower+lc -=toupper+uc -=remove+unlink -=fabs+abs -=strstr+index -## -=closedir++ -=readdir++ -=rewinddir++ -=fcntl++ -=getgrgid++ -=getgrnam++ -=atan2++ -=cos++ -=exp++ -=abs++ -=log++ -=sin++ -=sqrt++ -=getpwnam++ -=getpwuid++ -=kill++ -=getc++ -=rename++ -=exit++ -=system++ -=chmod++ -=mkdir++ -=stat++ -=umask++ -=gmtime++ -=localtime++ -=time++ -=alarm++ -=chdir++ -=chown++ -=fork++ -=getlogin++ -=getpgrp++ -=getppid++ -=link++ -=rmdir++ -=sleep++ -=unlink++ -=utime++ -## -=perror+C -=pause+C -=tzset+C -=difftime+C -=ctime+C -=clock+C -=asctime+C -=strcoll+C -=abort+C -=tcgetpgrp+C -=setsid+C -=_exit+C -=tanh+C -=tan+C -=sinh+C -=log10+C -=ldexp+C -=fmod+C -=floor+C -=cosh+C -=ceil+C -=atan+C -=asin+C -=acos+C -## -=isatty -Returns a boolean indicating whether the specified filehandle is connected -to a tty. -=setuid -Sets the real user id for this process. -=setgid -Sets the real group id for this process. -=getpid -Returns the process's id. -=getuid -Returns the user's id. -=getegid -Returns the effective group id. -=geteuid -Returns the effective user id. -=getgid -Returns the user's real group id. -=getgroups -Returns the ids of the user's supplementary groups. -=getcwd -Returns the name of the current working directory. -=strerror -Returns the error string for the specified errno. -=getenv -Returns the value of the specified enironment variable. -=getchar -Returns one character from STDIN. -=raise -Sends the specified signal to the current process. -=gets -Returns one line from STDIN. -=printf -Prints the specified arguments to STDOUT. -=rewind -Seeks to the beginning of the file. -## -=tmpnam -Returns a name for a temporary file. - - $tmpfile = POSIX::tmpnam(); -=cuserid -Get the character login name of the user. - - $name = POSIX::cuserid(); -=ctermid -Generates the path name for controlling terminal. - - $path = POSIX::ctermid(); -=times -The times() function returns elapsed realtime since some point in the past -(such as system startup), user and system times for this process, and user -and system times used by child processes. All times are returned in clock -ticks. - - ($realtime, $user, $system, $cuser, $csystem) = POSIX::times(); - -Note: Perl's builtin C<times()> function returns four values, measured in -seconds. -=pow -Computes $x raised to the power $exponent. - - $ret = POSIX::pow( $x, $exponent ); -=errno -Returns the value of errno. - - $errno = POSIX::errno(); -=sysconf -Retrieves values of system configurable variables. - -The following will get the machine's clock speed. - - $clock_ticks = POSIX::sysconf( &POSIX::_SC_CLK_TCK ); -=pathconf -Retrieves the value of a configurable limit on a file or directory. - -The following will determine the maximum length of the longest allowable -pathname on the filesystem which holds C</tmp>. - - $path_max = POSIX::pathconf( "/tmp", &POSIX::_PC_PATH_MAX ); -=access -Determines the accessibility of a file. - - if( POSIX::access( "/", &POSIX::R_OK ) ){ - print "have read permission\n"; - } -=setlocale -Modifies and queries program's locale. - -The following will set the traditional UNIX system locale behavior. - -This document generated by ./mkposixman.PL version 19951212. -## -=waitpid -=wait -=fstat -=sprintf -=opendir -=creat -=ttyname -=tzname -=fpathconf -=mktime -=tcsendbreak -=tcflush -=tcflow -=tcdrain -=tcsetpgrp -=mkfifo -=strxfrm -=wctomb -=wcstombs -=mbtowc -=mbstowcs -=mblen -=write -=uname -=setpgid -=read -=pipe -=nice -=lseek -=dup2 -=dup -=close -=sigsuspend -=sigprocmask -=sigpending -=sigaction -=modf -=frexp -=localeconv -=open -=isxdigit -=isupper -=isspace -=ispunct -=isprint -=isgraph -=isdigit -=iscntrl -=isalpha -=isalnum -=islower -=assert -=strftime -########## -==POSIX::SigAction -=new -Creates a new SigAction object. This object will be destroyed automatically -when it is no longer needed. diff --git a/makeaperl.SH b/makeaperl.SH index d621e67f03..d621e67f03 100644..100755 --- a/makeaperl.SH +++ b/makeaperl.SH diff --git a/minimod.pl b/minimod.pl index b9b70715b2..b9b70715b2 100644..100755 --- a/minimod.pl +++ b/minimod.pl diff --git a/os2/README b/os2/README deleted file mode 100644 index 785a6098bb..0000000000 --- a/os2/README +++ /dev/null @@ -1,814 +0,0 @@ -Contents: - Notes on the patch - IMPORTANT NOTE - Target - Binary Install - Reading the docs - Notes on build on OS/2 - Compile summary - Tests which fail - Calls to external programs - OS/2 extensions - Report from the battlefield on 5.002_01 - -Notes on the patch: -~~~~~~~~~~~~~~~~~~~ -patches should be applied as - patch -p0 <..... -All the diff.* files and POSIX.mkfifo should be applied. - -Additional files are available on - ftp://ftp.math.ohio-state.edu/pub/users/ilya/os2 -including patched pdksh and gnumake, needed for build. - - <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< -IMPORTANT NOTE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< - <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< - -Note with the release 5.003_01 the dynamically loadable libraries -should be rebuilt. In particular, DLLs are now created with the names -which contain a checksum, thus allowing workaround for OS/2 scheme of -caching DLLs. - -In particular, it is VERY IMPORTANT to have a correct perl.dll on -LIBPATH during build, otherwise DLLs with wrong names will be -created. Or have a perl.dll with the same naming convention for DLLs -(hopefully, it should not change any time soon), or remove it from -LIBPATH, add . to LIBPATH, wait until the build of DynaLoader fails, -and then move the built DLL into LIBPATH. - -I also used this possibility to change perl linking type to -Zmt. It -means that Perl now uses multithreaded CRTDLL, so your extensions can -be multithreaded (note that the perl core is not thread-safe so far, -so make sure you access Perl from one thread only). In particular, it -is no longer needed to statically link X11_s.lib if you compile -Perl/Tk/XFree. - -This newer port includes - . numeric first argument to system(), see OS2::Process docs; - . modules OS2::Process, OS2::REXX, OS2::PrfDB, OS2::ExtAttrib. - . {get,set,end}*ent may work now (not checked) -(most of this merged from ak's port). - -Note that static build of OS2::ExtAttrib fails some tests! - -Target: -~~~~~~~ - -This is not supposed to make a perfect Perl on OS/2. This patch is -concerned only with perfect _build_ of Perl on OS/2. Some good -features from Andreas Kaiser port missed this port. However, most of -the features are available (possibly in different form). - -!!! Note that [gs]etpriority functions in this port are compatible -!!! with *nix, not with ak's port!!! - -The priorities are absolute, go from 32 to -95, lower is quickier. 0 -is default, - -Binary Install: -~~~~~~~~~~~~~~ -This version of perl allows binary installation on another site. There -are two possibilities: - a) sh.exe is in the directory with the same name as on machine -where perl was compiled (f:/bin here), and perl library is installed -into the same directory as the built target (f:/perllib); - b) One of the above conditions is not true. Perl may be -informed about location of sh.exe via PERL_SH_DRIVE or PERL_SH_DIR -(see below). To relocate the perl library, one can - b1) either use the usual PERLLIB environment variable - but -you should deduce yourself which components should be put there, say, -by doing - perl -de 0 - x \@INC - q -in the directory of the perl library. Another problem with this is -that a module is missing, then perl will try to scan the builtin -directories nevertheless. If perl was intended to be installed on -f:/perllib, but your f: is a CDROM, then you may have some trouble. - b2) Best: binary edit perl.dll and perl_.exe (using perl -itself as a binary editor) to fix the paths. Note that the new paths -should be better no longer than the old. - b3) More convinient: set PERLLIB_PREFIX environment -variable. It should contain two components, separated by whitespace -and/or semicolon `;'. The first component is translated to the second -one if it is - a prefix of - a component of - Perl library lookup path. -Say, if you install perllibrary into c:/lib/perl/ instead of -f:/perllib/, set it to - set PERLLIB_PREFIX=f:/perllib/;c:/lib/perl/ - -Reading the docs: -~~~~~~~~~~~~~~~~ -If your `man' is correctly installed, you should just add -x:/perllib/man directory to the end of MANPATH like this: - set MANPATH=c:/man;f:/perllib/man -After this you can access the docs like this: - man perlfunc - man 3 less - man ExtUtils.MakeMaker -Note that dot is used as package separator for package documentation, -and as usual, sometimes you need to give the section - 3 above - to -avoid shadowing by the less(1) manpage. - -Alternatively, you can build HTML docs by running - pod2html -in x:/perllib/lib/pod directory. - -Alternatively, you can build IPF source by running - pod2ipf > perl.ipf -in x:/perllib/lib/pod directory, and build (excellent! - best of perl -docs available!) .INF documentation by running - ipfc /inf perl.ipf -Move it on your BOOKSHELF path, and now you may inspect docs by - view perl -or - view perl keyword_to_see - -Alternatively you may pick up precompiled HTML and .INF docs from the -net, as usual, .INF is available on CPAN/.../os2/ilyaz. - -There are also _very_ good docs in TexInfo and Adobe PDF format. - -Notes on build on OS/2: -~~~~~~~~~~~~~~~~~~~~~~~ -a) Make sure your sort is not the broken OS/2 one, and that you have /tmp -on the build partition. Make sure that your pdksh.exe, make.exe and -db.lib are OK (look elsewhere in this file). - -b) when extracting perl5.*.tar.gz you need to extract perl5.*/Configure -separately, since by default perl5.001m/configure may overwrite it; - like this: - tar vzxf perl5.004.tar.gz --case-sensitive perl5.004/Configure -or - tar --case-sensitive -vzxf perl5.004.tar.gz perl5.004/Configure - -c) Necessary manual intervention when compiling on OS/2: - - Need to put perl.dll on LIBPATH after it is created. - -d) Compile summary: - ~~~~~~~~~~~~~~~ -!!! At the end of this README is independent description of the build -!!! process by Rocco Caputo. - -# Look for hints/os2.sh and correct what is different on your system -# I have rather spartan configuration. - - # Prefix means where to install: -sh Configure -des -D prefix=f:/perl5.005 - # Note that you need to have /tmp/ ready. - # - # Ignore the message about missing `ln', and about `c' option - # to tr. -make - # Will probably die after build of miniperl (unless you have DLL - # from previous compile). Need to move DLL where it belongs - # - # Somehow with 5.002b3 I needed to type another make after pod2man -make - # some warnings in POSIX.c -make test - # some tests fail, 9 or 10 on my system (see the list at end). - # - # before this you should create subdirs bin and lib in the - # prefix directory (f:/perl5.005 above): - # - # To run finer tests, cd t && perl harness -make install - -e) At the end of July 1996 GNU make was too buggy for compile. -The maintainer has the patch (for a year now) that make it possible to -compile perl. The binaries are included in - ftp://ftp.math.ohio-state.edu/pub/users/ilya/os2 -patches are available too. - -Note that the pdksh5.2.7 or later is required. - -!!!!!!!!!!!!!!!!! -If you see that some '/' became '\' in pdksh, you use an old pdksh! -Same with segfaults in Make 3.76 (?) - use my patched verions. -!!!!!!!!!!!!!!!!! - -f) As distributed the DB library db.a-db.lib is not suitable for -linking with -Zmt. A recompiled version must be available from my FTP -site in os2/db_mt.zip. - -!!!!!!!!!!!!!!!! -If you see: - 'errno' - unresolved external -it means you use a wrong db.lib. -!!!!!!!!!!!!!!!! - -Problems reported: - -a) one of the latest tr is broken, get an old one :-( - 1.11 works. (On compuserver?) -b) You need a perlglob.exe and link386. -c) Get rid of invalid perl.dll on your LIBPATH. - - -Send comments to ilya@math.ohio-state.edu. - -====================================================== -Requires 0.9b (well, provision are made to make it build under 0.9a6, -but they are not tested, please inform me on success). -(earlier than 0.9b ttyname was not present, it is hard to maintain this -difference automatically, though I try). -====================================================== - -Building with a.out style is supported by the `perl_' target of make. -Dynamic extensions are not possible with perl_.exe, since boot code -should return the retvalue on the Perl stack, the address of which is -not known to the extension. Moreover: The build process for `perl_' -DOES NOT KNOW about dependencies, so you should make sure that -anything is up-to-date, say, by doing - make perl.dll -first. - -The reason why compiling with a.out style executables leads to problems -with dynamic extensions is: - a) OS/2 does not export symbols from executables; - b) Thus if extension needs to import symbols from an application - the symbols for the application should reside in a .dll. - c) You cannot export data from a .dll compiled with a.out style. -On the other hand, aout-style compiled extension enjoys all the -(dis)advantages of fork(). - -====================================================== - -If you need to run PM code from perl, you may use PM mode executable -perl__.exe. It is subject to restrictions specific to PM programs: it -will close the VIO window the moment any PM call is performed. - -It is needed to run Perl/Tk (currently 7/96 - pre-alpha). - -====================================================== - -The reason why the executables are named perl_.exe and perl__.exe is -the following: Perl may parse #! lines in perl scripts to find out the -additional switches to enable. Thus there is a convention `What is a -perl executable - judging by name', and the above names conform to -this convention. - -====================================================== -Tests which fail -~~~~~~~~~~~~~~~~ -with OMF compile (fork works - and all the related -test - with A.OUT compile): - -io/fs.t: 2-5, 7-11, 18 as they should. -io/pipe: all, since open("|-") is not working (works with perl_.exe). -lib/"all the dbm".t: 1 test should fail (file permission). -lib/io_pipe io_sock, as they should: use fork. -op/fork all fail, as they should (except with perl_.exe) -op/stat 3 20 35 as they should, 39 (-t on /dev/null) ???? Sometimes 4 -- timing problem ???? - -Sometimes I have seen segfault in socket ????, only if run with Testing tools. - -A lot of `bad free'... in databases, bug in DB confirmed on other -platforms. You may disable it by setting PERL_BADFREE environment variable -to 0. - -Here is my result with OMF: - -Test Status Wstat Total Fail Success List of failed ------------------------------------------------------------------------------- -io/fs.t 22 10 45.45% 2-5, 7-11, 18 -io/pipe.t 1 256 8 ?? % ?? -lib/anydbm.t 12 1 8.33% 2 -lib/db-btree.t 86 1 1.16% 20 -lib/db-hash.t 43 1 2.33% 16 -lib/db-recno.t 35 1 2.86% 18 -lib/io_pipe.t 2 512 6 ?? % ?? -lib/io_sock.t 255 65280 5 ?? % ?? -lib/sdbm.t 12 1 8.33% 2 -op/exec.t 8 1 12.50% 5 -op/fork.t 255 65280 2 ?? % ?? -op/stat.t 56 4 7.14% 3, 20, 35, 39 -Failed 12/104 test scripts, 88.46% okay. 41/2224 subtests failed, 98.16% okay. - -and with A.OUT: - -Test Status Wstat Total Fail Failed List of failed ------------------------------------------------------------------------------- -io/fs.t 22 10 45.45% 2-5, 7-11, 18 -lib/anydbm.t 12 1 8.33% 2 -lib/db-btree.t 86 1 1.16% 20 -lib/db-hash.t 43 1 2.33% 16 -lib/db-recno.t 35 1 2.86% 18 -lib/sdbm.t 12 1 8.33% 2 -op/exec.t 8 1 12.50% 5 -op/stat.t 56 4 7.14% 3, 20, 35, 39 -Failed 8/104 test scripts, 92.31% okay. 20/2224 subtests failed, 99.10% okay. - -Note that op/exec.5 fail because I do not have /bin/sh on this drive. - -With newer configs I could not reproduce most the crashes. However, -after fixpak17 REXX variables acquire a trailing '\0' at end when go -through the variable pool (even if they had one), thus making some -REXX tests fail. - -======================================================= - -Calls to external programs: -~~~~~~~~~~~~~~~~~~~~~~~~~~ -Due to a popular demand the perl external program calling has been -changed. _If_ perl needs to call an external program _via shell_, the -X:/bin/sh.exe will be called. The name of the shell is -overridable, as described below. - -Thus means that you need to pickup some copy of a sh.exe as well (I use one -from pdksh). The drive X: above is set up automatically during the -build, is settable in runtime from $ENV{PERL_SH_DRIVE}. Another way to -change it is to set $ENV{PERL_SH_DIR} to be the directory in which -sh.exe resides. - -Reasons: a consensus on perl5-porters was that perl should use one -non-overridable shell per platform. The obvious choices for OS/2 are cmd.exe -and sh.exe. Having perl build itself would be impossible with cmd.exe as -a shell, thus I picked up sh.exe. Thus assures almost 100% compatibility -with the scripts coming from *nix. - -Disadvantages: sh.exe calls external programs via fork/exec, and there is -_no_ functioning exec on OS/2. exec is emulated by EMX by asyncroneous call -while the caller waits for child completion (to pretend that pid did -not change). This means that 1 _extra_ copy of sh.exe is made active via -fork/exec, which may lead to some resources taken from the system. - -The long-term solution proposed on p5-p is to have a directive - use OS2::Cmd; -which will override system(), exec(), ``, and open(,' |'). With current -perl you may override only system(), readpipe() - the explicit version -of ``, and maybe exec(). The code will substitute a one-argument system -by CORE::system('cmd.exe', '/c', shift). - -If you have some working code for OS2::Cmd.pm, please send it to me, -I will include it into distribution. I have no need for such a module, so -cannot test it. - -=================================================== - -OS/2 extensions -~~~~~~~~~~~~~~~ -Since binaries cannot go into perl distribution, no extensions are -included. They are available in .../os2/ilyaz directory of CPAN, as -well as in my directory - ftp://ftp.math.ohio-state.edu/pub/users/ilya/os2 - -I include 3 extensions by Andread Kaiser, OS2::REXX, OS2::UPM, and OS2::FTP, -into my ftp directory, mirrored on CPAN. I made -some minor changes needed to compile them by standard tools. I cannot -test UPM and FTP, so I will appreciate your feedback. Other extensions -there are OS2::ExtAttribs, OS2::PrfDB for tied access to EAs and .INI -files - and maybe some other extensions at the time you read it. - -Note that OS2 perl defines 2 pseudo-extension functions -OS2::Copy::copy and DynaLoader::mod2fname. - -The -R switch of older perl is deprecated. If you need to call a REXX code -which needs access to variables, include the call into a REXX compartment -created by - REXX_call {...block...}; - -Two new functions are supported by REXX code, - REXX_eval 'string'; - REXX_eval_with 'string', REXX_function_name => \&perl_sub_reference; - -If you have some other extensions you want to share, send the code to -me. At least two are available: tied access to EA's, and tied access -to system databases. - -================================================================== -== == -== User report [my comments in brackets, IZ] == -== == -== A web page: http://www.shadow.net/~troc/os2perl.html == -== == -================================================================== - -Starting in x:/usr/src, using 4OS2/32 2.5 as the command interpreter on -OS/2 2.30 with FixPak-17. DAX is installed, but this shouldn't be a -factor. Drive X is a TVFS virtual drive pointing to several physical -HPFS drives. - ->>> Make sure that no copies or perl are currently running. Miniperl - may fail during the build because it will find an older version - of perl.dll loaded in memory. - - Close any running perl scripts. - Shut down anything that might run perl scripts, like cron. - `emxload -l` to check for loaded versions of perl. - `emxload -u perl.exe` to unload them. - ->>> Pre-load some common utilities: - - emxload -e sh.exe make.exe ls.exe tr.exe id.exe sed.exe - SET GCCLOAD=30 (number of minutes to hold the compiler) -[grep egrep fgrep cat rm uniq basename uniq sort - are not bad too.] - The theory is that it's faster to demand-load the development tools - from virtual memory than it is to re-load and re-link them all the - time. This is definitely true with my system because swapfile.dat - is on a faster drive than my development environment. - - ls, tr, and id represent the GNU file, text, and shell utilities. - These may not be needed, but it makes sure that their respective - DLLs are in memory. - ->>> Unpack the perl 5_002_01 archive onto an HPFS partition. - - tar vxzf perl5_002_01.tar-gz - cd perl5.002_01 - -[Do not forget to extract Configure as described above.] - ->>> Read the README, keeping a copy open in another session for reference. - - start /c /fg less os2/README - ->>> Apply the OS/2 patches included with 5.002_01, as per the README. - - for %m in (os2\diff.*) patch -p0 < %m - patch -p0 < os2\POSIX.mkfifo - -[The patch below is already applied.] - ->>> You may need to apply this patch if you plan to run a non-standard - Configure (that is, if you defy the README). This patch will ensure - that Makefile inherits the libraries specified during Configure. - People running standard perl builds can probably ignore this patch. - -*** os2\Makefile.SHs Mon Mar 25 02:05:00 1996 ---- os2\Makefile.SHs.new Fri May 24 10:37:10 1996 -*************** -*** 9,15 **** - emximp -o perl.imp perl5.def - - perl.dll: $(obj) perl5.def perl$(OBJ_EXT) -! $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj) -lsocket perl5.def - - perl5.def: perl.linkexp - echo "LIBRARY 'Perl' INITINSTANCE TERMINSTANCE" > $@ ---- 9,15 ---- - emximp -o perl.imp perl5.def - - perl.dll: $(obj) perl5.def perl$(OBJ_EXT) -! $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj) $(libs) perl5.def - - perl5.def: perl.linkexp - echo "LIBRARY 'Perl' INITINSTANCE TERMINSTANCE" > $@ -*************** -*** 49,55 **** - cat perl.exports perl.map | sort | uniq -d | sed -e 's/\w\+/ "\0"/' > perl.linkexp - - perl.map: $(obj) perl$(OBJ_EXT) miniperlmain$(OBJ_EXT) -! $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o dummy.exe miniperlmain$(OBJ_EXT) perl$(OBJ_EXT) $(obj) -lsocket -lm -Zmap -Zlinker /map - awk '{if ($$3 == "") print $$2}' <dummy.map | sort | uniq > perl.map - rm dummy.exe dummy.map - ---- 49,55 ---- - cat perl.exports perl.map | sort | uniq -d | sed -e 's/\w\+/ "\0"/' > perl.linkexp - - perl.map: $(obj) perl$(OBJ_EXT) miniperlmain$(OBJ_EXT) -! $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o dummy.exe miniperlmain$(OBJ_EXT) perl$(OBJ_EXT) $(obj) $(libs) -Zmap -Zlinker /map - awk '{if ($$3 == "") print $$2}' <dummy.map | sort | uniq > perl.map - rm dummy.exe dummy.map - ->>> Apply the patches from Ilya's perl5.002_01 binary distribution: - - touch os2/dlfcn.h os2/dl_os2.c - patch -p1 < f:\perllib\README.fix1 - ->>> Run Configure. Most people can run it by following the README: - - sh Configure -des -D prefix=f:/usr/local - - Advanced perl users (experienced C programmers, recommended) can run - the interactive Configure and answer the questions. When in doubt - about an answer, check the EMX headers and documentation. Pick the - default answer if that doesn't help: - - sh Configure - -[Yet more advanced users just specify the answers on the command line -of Configure, like I did with prefix.] - - Note: You may need to wrap an answer in quotes if it contains - spaces. For example, "-lsocket -lm". - - Note: If you want to add some options to a long default, you can - use $* to include the default in your answer: "$* -DDEBUGGING". - - Configure warnings and errors, and possible work-arounds: - - I don't know where 'ln' is.... - (ignored; OS/2 doesn't have a ln command) - - nm didn't seem to work right. Trying emxomfar instead... - (nothing to worry about) - - The recommended value for $d_shrplib on this machine was "define"! - (kept the recommended value: y) - - Directory f:/usr/lib/perl5/os2/5.00201/CORE doesn't exist. - (created the directory from another window with - \usr\bin\mkdir -p f:/usr/lib/perl5/os2/5.00201/CORE - and then answered: y. Your directory may look different.) - -[Ignore this as well, install script will create it for you.] - - The recommended value for $i_dlfcn on this machine was "define"! - (kept the recommended value: y) - - The recommended value for $d_fork on this machine was "undef"! - (kept the recommended value: y) - - Figuring out the flag used by open() for non-blocking I/O... - Seems like we can use O_NONBLOCK. - This seems to be used for informative purposes only. - The errors that follow this (including a SIGPIPE) don't seem - to affect perl at all. These were safely ignored. - - What pager is used on your system? [/usr/ucb/more] - Had to answer "/usr/bin/less.exe" because Configure wants a - leading / (unix full path). Need to edit config.sh later with - the real full path to the pager, including the drive letter. - -[Apparently this setting is never used, so it is safe to ignore it.] - - Hmm... F:/USR/BIN/sed: Unterminated `s' command - Perl built fine even with this error, so it seems safe to - ignore. - - Things I did different from the defaults. Most (if not all) of these - are optional changes. They're listed here to show how good Configure - is at detecting the system setup. - -[I add the options to put it on command line of Configure, see below.] - - Selected 'none' for the man1 location. - (I prefer the pod2html version.) -[-D man1dir=none] - Selected 'none' for the man3 location. - (I prefer the pod2html version.) -[-D man3dir=none] - Changed the hostname and domain. - (I wanted to override a dynamic PPP address. This only - matters if other people will be using your perl build.) -[-D myhostname=my_host_name -D mydomain=.foo.org] - Fixed the e-mail address. - (Put in a known working e-mail address. This only matters - if other people will be using your perl build.) -[-D cf_email=root@myhostname.uucp] - Added some directories to the library search path. -[-D "libpth=f:/emx/lib/st f:/emx/lib"] - Added -g to the optimizer/debugger flags. -[-D optimize=-g] - Added "-lgdbm -ldb -lcrypt -lbsd" to the additional libraries. -[ -D "libs=-lsocket -lcrypt -lgdbm" - the rest of libraries will not be used] - ->>> Advanced users may want to edit config.sh when prompted by Configure. - Most (all?) of these changes aren't really necessary: - - d_getprior='define' - d_setprior='define' - (getpriority and setpriority are included in os2.c, but - Configure doesn't know to look there.) -[fixed already] - pager='f:/usr/bin/less.exe' - (Correcting Configure's insistence on a leading slash.) - bin_sh='f:/usr/bin/sh.exe' - (If Configure detects sh.exe somewhere else first. Example: - it saw sh.exe at /bin/sh.exe on my TVFS drive, but I want - perl to look for it on the physical F drive.) - aout_ccflags='... existing flags... -DDEBUGGING' - aout_cppflags='... existing flags... -DDEBUGGING' - (If you want to include DEBUGGING for the aout version.) -[Do not do it, -D optimize=-g will automatically add these flags.] - ->>> Allow Configure to make the build scripts. - ->>> Allow Configure to run `make depend`. Ignore the following warning: - - perl.h:861: warning: `DEBUGGING_MSTATS' redefined -[corrected now] - ->>> Rename any existing perl.dll, preventing anything from loading it and - saving a known working copy in case something goes wrong: - - mv /usr/lib/perl.dll /usr/lib/ilya-perl.dll - ->>> Run `make`, and ignore the following warnings: - - perl.h:861: warning: `DEBUGGING_MSTATS' redefined -[corrected now] - invalid preprocessing directive name - emxomf warning: Cycle detected by make_type - LINK386 : warning L4071: application type not specified; assuming WINDOWCOMPAT - Warning (will try anyway): No library found for -lposix - Warning (will try anyway): No library found for -lcposix - POSIX.c:203: warning: `mkfifo' redefined - POSIX.c:4603: warning: assignment makes pointer from integer without a cast - ->>> If `make` dies while "Making DynaLoader (static)", you'll need to - put miniperl in the OS/2 paths. This step is only necessary if `make` - can't find miniperl: -[I would be interested if somebody confirmes this.] - - cp perl.dll /usr/lib (where /usr/lib is in your LIBPATH) - cp miniperl.exe /usr/bin (where /usr/bin is in your PATH) - make (ignore the errors in the previous step) - - This should run to completion. - ->>> Test the build: - - make test - - These tests fail: - - io/fs..........FAILED on test 2 - - "OS/2 is not unix". Test 2 checks the link() command, which - is not supported by OS/2. - - io/pipe........f:/usr/bin/sh.exe: -c requires an argument - f:/usr/bin/sh.exe: -c requires an argument - The Unsupported function fork function is unimplemented at - io/pipe.t line 26. - FAILED on test 1 - - More "OS/2 is not unix" errors. Read ahead to find out - why fork() fails. - - op/exec........FAILED on test 4 - - if (system "true") {print "not ok 4\n";} else \ - {print "ok 4\n";} - - This fails for me, but changing it to read like this works: - - if (system '\usr\bin\true.cmd') {print "not ok 4\n";} \ - else {print "ok 4\n";} - - So you can count this as another "OS/2 is not unix". - - op/fork........The Unsupported function fork function is \ - unimplemented at op/fork.t line 8. - FAILED on test 1 - - The dynamically-loaded version of perl currently doesn't - support fork(). This is a known behavior of EMX. - - op/magic....... - Process terminated by SIGINT - ok - - The test passed even with the SIGINT message. I don't - know why, but I won't argue. - - op/stat........ls: /dev: No such file or directory - f:/usr/bin/sh.exe: ln: not found - ls: perl: No such file or directory - FAILED on test 3 - - "OS/2 is not unix". We don't have the ln command. - - lib/anydbm.....Bad free() ignored at lib/anydbm.t line 51. - Bad free() ignored at lib/anydbm.t line 51. - Bad free() ignored at lib/anydbm.t line 51. - Bad free() ignored during global destruction. - Bad free() ignored during global destruction. - Bad free() ignored during global destruction. - FAILED on test 2 - - Test 2 looks at the file permissions for a database. "OS/2 - is not unix" so the permissions aren't exactly what this test - expects. - - lib/db-btree...Bad free() ignored at lib/db-btree.t line 109. - Bad free() ignored at lib/db-btree.t line 221. - Bad free() ignored at lib/db-btree.t line 337. - Bad free() ignored at lib/db-btree.t line 349. - Bad free() ignored at lib/db-btree.t line 349. - Bad free() ignored at lib/db-btree.t line 399. - Bad free() ignored at lib/db-btree.t line 400. - Bad free() ignored at lib/db-btree.t line 401. - FAILED on test 20 - - Another file permissions test fails. - - lib/db-hash....Bad free() ignored at lib/db-hash.t line 101. - Bad free() ignored at lib/db-hash.t line 101. - Bad free() ignored at lib/db-hash.t line 101. - Bad free() ignored at lib/db-hash.t line 239. - Bad free() ignored at lib/db-hash.t line 239. - Bad free() ignored at lib/db-hash.t line 239. - Bad free() ignored at lib/db-hash.t line 253. - Bad free() ignored at lib/db-hash.t line 253. - Bad free() ignored at lib/db-hash.t line 253. - FAILED on test 16 - - Another file permissions test fails. - - lib/db-recno...Bad free() ignored at lib/db-recno.t line 138. - Bad free() ignored at lib/db-recno.t line 138. - FAILED on test 18 - - Another file permissions test fails. - - lib/gdbm.......FAILED on test 2 - - Another file permissions test fails. - - lib/sdbm.......FAILED on test 2 - - Another file permissions test fails. - - Failed 11/94 tests, 88.30% okay. - - All of which are known differences with unix or documented - behaviors in EMX. I re-run the test with Ilya's version, - and the same tests fail. This new build is a success. -[Note that bad free() mentioned above are bugs in the Berkeley -DB. They just are more visible under OS/2 with perl free(), because of -"rigid" function name resolution. You may disable it by setting -PERL_BADFREE environment variable to 0. - To get finer tests, cd to ./t and run - perl harness -] - - (Actually, Ilya's perl release fails an extra test because I don't - have sed in f:\emx.add. This shows how important it is to configure - and build perl yourself instead of grabbing pre-built binaries.) -[Hmm, should not happen... There is no mentions of full_sed under ./t -directory...] - ->>> Cross your fingers and install it: - - make install - - Warnings encountered and workarounds presented.: - - WARNING: You've never run 'make test'!!! (Installing anyway.) - (Lies! All lies! At least it still installs.) - - WARNING: Can't find libperl*.dll* to install into \ - f:/usr/lib/perl5/os2/5.00201/CORE. (Installing other things anyway.) - (Safe to ignore. The important one, libperl.lib, gets copied.) - - Couldn't copy f:/usr/bin/perl5.00201.exe to f:/usr/bin/perl.exe: \ - No such file or directory - cp /usr/bin/perl5.00201.exe /usr/bin/perl.exe - - Couldn't copy f:/usr/bin/perl.exe to /usr/bin/perl.exe: No such \ - file or directory - (I think this one is safe to ignore since the two directories - point to the same place.) - ->>> Laugh maniacally because you just built and installed your own copy - of perl, with all the paths set "just so" and with whatever little - psychotic modifications you've always wanted but were afraid to add. - ------------------------------------------------------------------------------ - -Development tools and versions: - - EMX 0.9b with emxfix04 applied. - - `ls --version` reports: 'GNU file utilities 3.12' - `tr --version` reports: 'tr - GNU textutils 1.14' - `id --version` reports: 'id - GNU sh-utils 1.12' - - `sed --version` reports: 'GNU sed version 2.05' - `awk --version` reports: 'Gnu Awk (gawk) 2.15, patchlevel 6' - `grep --version` reports an illegal option and: 'GNU grep version 2.0' - (this includes egrep) - - `sort --version` reports: 'sort - GNU textutils 1.14' - `uniq --version` reports: 'uniq - GNU textutils 1.14' - `find --version` reports: 'GNU find version 4.1' - - KSH_VERSION='@(#)PD KSH v5.2.4 96/01/17' - (Ilya's patched version.) - - `make --version` reports: 'GNU Make version 3.74' - (Ilya's patched version.) - - `emxrev` reports: - EMX : revision = 42 - EMXIO : revision = 40 - EMXLIBC : revision = 40 - EMXLIBCM : revision = 43 - EMXLIBCS : revision = 43 - EMXWRAP : revision = 40 - ------------------------------------------------------------------------------ - -Rocco -<troc@shadow.net> - diff --git a/perl_exp.SH b/perl_exp.SH index d941b0eb31..d941b0eb31 100644..100755 --- a/perl_exp.SH +++ b/perl_exp.SH diff --git a/pod/Makefile.PL b/pod/Makefile.PL deleted file mode 100644 index 911bff83e3..0000000000 --- a/pod/Makefile.PL +++ /dev/null @@ -1,133 +0,0 @@ -#!/usr/local/bin/perl - -use Config; -use File::Basename qw(&basename &dirname); - -# List explicitly here the variables you want Configure to -# generate. Metaconfig only looks for shell variables, so you -# have to mention them as if they were shell variables, not -# %Config entries. Thus you write -# $startperl -# to ensure Configure will look for $Config{startperl}. - -# This forces PL files to create target in same directory as PL file. -# This is so that make depend always knows where to find PL derivatives. -chdir(dirname($0)); -($file = basename($0)) =~ s/\.PL$//; -$file =~ s/\.pl$// - if ($Config{'osname'} eq 'VMS' or - $Config{'osname'} eq 'OS2'); # "case-forgiving" - -open OUT,">$file" or die "Can't create $file: $!"; - -print "Extracting $file (with variable substitutions)\n"; - -# In this section, perl variables will be expanded during extraction. -# You can use $Config{...} to use Configure variables. - -print OUT <<"!GROK!THIS!"; -!GROK!THIS! - -# In the following, perl variables are not expanded during extraction. - -print OUT <<'!NO!SUBS!'; -CONVERTERS = pod2html pod2latex pod2man pod2text - -all: $(CONVERTERS) man -!NO!SUBS! - -if (-x '../miniperl') { - print OUT "PERL = ..\/miniperl\n\n"; -} -else { - print OUT "PERL = ../miniperl\n\n"; -} - -@pods = <*.pod>; - -print OUT 'POD = '; -foreach (@pods) { - # Remove .pod suffix. Each section should add its own suffix. - s/\.pod$//; - print OUT "\t\\\n\t$_.pod"; -} -print OUT "\n\n"; - -print OUT 'MAN = '; -foreach (@pods) { - print OUT "\t\\\n\t$_.man"; -} -print OUT "\n\n"; - -print OUT 'HTML = '; -foreach (@pods) { - print OUT "\t\\\n\t$_.html"; -} -print OUT "\n\n"; - -print OUT 'TEX = '; -foreach (@pods) { - s/\.pod/.tex/; - print OUT "\t\\\n\t$_.tex"; -} -print OUT "\n\n"; - -print OUT <<'!NO!SUBS!'; -man: pod2man $(MAN) - -# pod2html normally runs on all the pods at once in order to build up -# cross-references. -html: pod2html - $(PERL) -I../lib pod2html $(POD) - -tex: pod2latex $(TEX) - -.SUFFIXES: .pm .pod .man - -.pm.man: pod2man - $(PERL) -I../lib pod2man $*.pm >$*.man - -.pod.man: pod2man - $(PERL) -I../lib pod2man $*.pod >$*.man - -.SUFFIXES: .mp .pod .html - -.pm.html: pod2html - $(PERL) -I../lib pod2html $*.pod - -.pod.html: pod2html - $(PERL) -I../lib pod2html $*.pod - -.SUFFIXES: .pm .pod .tex - -.pod.tex: pod2latex - $(PERL) -I../lib pod2latex $*.pod - -.pm.tex: pod2latex - $(PERL) -I../lib pod2latex $*.pod - -clean: - rm -f $(MAN) $(HTML) $(TEX) - -realclean: clean - rm -f $(CONVERTERS) - -distclean: realclean - -# Dependencies. -pod2latex: pod2latex.PL ../lib/Config.pm - $(PERL) -I../lib pod2latex.PL - -pod2html: pod2html.PL ../lib/Config.pm - $(PERL) -I ../lib pod2html.PL - -pod2man: pod2man.PL ../lib/Config.pm - $(PERL) -I ../lib pod2man.PL - -pod2text: pod2text.PL ../lib/Config.pm - $(PERL) -I ../lib pod2text.PL -!NO!SUBS! - -close OUT or die "Can't close $file: $!"; -chmod 0644, $file or die "Can't reset permissions for $file: $!\n"; -exec("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':'; diff --git a/t/op/bop.t b/t/op/bop.t index 8ebf8d3eeb..8ebf8d3eeb 100644..100755 --- a/t/op/bop.t +++ b/t/op/bop.t diff --git a/vms/ext/Stdio/test.pl b/vms/ext/Stdio/test.pl index 12e508aa1f..12e508aa1f 100755..100644 --- a/vms/ext/Stdio/test.pl +++ b/vms/ext/Stdio/test.pl diff --git a/vms/fndvers.com b/vms/fndvers.com index f1ddc03eca..f1ddc03eca 100755..100644 --- a/vms/fndvers.com +++ b/vms/fndvers.com diff --git a/writemain.SH b/writemain.SH index f07c682faf..f07c682faf 100644..100755 --- a/writemain.SH +++ b/writemain.SH |