summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--lib/Pod/Checker.pm400
-rw-r--r--lib/Pod/Find.pm16
-rw-r--r--lib/Pod/InputObjects.pm4
-rw-r--r--lib/Pod/ParseUtils.pm68
-rw-r--r--lib/Pod/Parser.pm118
-rw-r--r--lib/Pod/Select.pm4
-rw-r--r--lib/Pod/Usage.pm4
-rwxr-xr-xt/pod/poderrs.t5
-rw-r--r--t/pod/poderrs.xr65
-rwxr-xr-xt/pod/special_seqs.t17
-rw-r--r--t/pod/special_seqs.xr13
11 files changed, 505 insertions, 209 deletions
diff --git a/lib/Pod/Checker.pm b/lib/Pod/Checker.pm
index c661c7527e..b5f980bba7 100644
--- a/lib/Pod/Checker.pm
+++ b/lib/Pod/Checker.pm
@@ -10,7 +10,7 @@
package Pod::Checker;
use vars qw($VERSION);
-$VERSION = 1.096; ## Current version of this package
+$VERSION = 1.097; ## Current version of this package
require 5.004; ## requires this Perl version or later
use Pod::ParseUtils; ## for hyperlinks and lists
@@ -111,6 +111,11 @@ very robust conversions.
=over 4
+=item * empty =headn
+
+A heading (C<=head1> or C<=head2>) without any text? That ain't no
+heading!
+
=item * =over on line I<N> without closing =back
The C<=over> command does not have a corresponding C<=back> before the
@@ -134,7 +139,7 @@ A standalone C<=end> command was found.
=item * Nested =begin's
-There were at least two concecutive C<=begin> commands without
+There were at least two consecutive C<=begin> commands without
the corresponding C<=end>. Only one C<=begin> may be active at
a time.
@@ -168,13 +173,29 @@ does not make sense.
=item * garbled entity I<STRING>
-The I<STRING> found cannot be interpreted as an character entity.
+The I<STRING> found cannot be interpreted as a character entity.
+
+=item * Entity number out of range
+
+An entity specified by number (dec, hex, oct) is out of range (1-255).
=item * malformed link LE<lt>E<gt>
The link found cannot be parsed because it does not conform to the
syntax described in L<perlpod>.
+=item * nonempty ZE<lt>E<gt>
+
+The C<ZE<lt>E<gt>> sequence is supposed to be empty.
+
+=item * Spurious text after =pod / =cut
+
+The commands C<=pod> and C<=cut> do not take any arguments.
+
+=item * Spurious character(s) after =back
+
+The C<=back> command does not take any arguments.
+
=back
=head2 Warnings
@@ -183,14 +204,43 @@ These may not necessarily cause trouble, but indicate mediocre style.
=over 4
+=item * multiple occurence of link target I<name>
+
+The POD file has some C<=item> and/or C<=head> commands that have
+the same text. Potential hyperlinks to such a text cannot be unique then.
+
+=item * line containing nothing but whitespace in paragraph
+
+There is some whitespace on a seemingly empty line. POD is very sensitive
+to such things, so this is flagged. B<vi> users switch on the B<list>
+option to avoid this problem.
+
+=item * file does not start with =head
+
+The file starts with a different POD directive than head.
+This is most probably something you do not want.
+
=item * No numeric argument for =over
The C<=over> command is supposed to have a numeric argument (the
indentation).
-=item * Spurious character(s) after =back
+=item * previous =item has no contents
-The C<=back> command does not take any arguments.
+There is a list C<=item> right above the flagged line that has no
+text contents. You probably want to delete empty items.
+
+=item * preceding non-item paragraph(s)
+
+A list introduced by C<=over> starts with a text or verbatim paragraph,
+but continues with C<=item>s. Move the non-item paragraph out of the
+C<=over>/C<=back> block.
+
+=item * =item type mismatch (I<one> vs. I<two>)
+
+A list started with e.g. a bulletted C<=item> and continued with a
+numbered one. This is obviously inconsistent. For most translators the
+type of the I<first> C<=item> determines the type of the list.
=item * I<N> unescaped C<E<lt>E<gt>> in paragraph
@@ -198,14 +248,14 @@ Angle brackets not written as C<E<lt>ltE<gt>> and C<E<lt>gtE<gt>>
can potentially cause errors as they could be misinterpreted as
markup commands.
-=item * Non-standard entity
+=item * Unknown entity
A character entity was found that does not belong to the standard
-ISO set.
+ISO set or the POD specials C<verbar> and C<sol>.
=item * No items in =over
-The list does not contain any items.
+The list opened with C<=over> does not contain any items.
=item * No argument for =item
@@ -214,6 +264,12 @@ by C<*> to indicate an unordered list, by a number (optionally followed
by a dot) to indicate an ordered (numbered) list or simple text for a
definition list.
+=item * empty section in previous paragraph
+
+The previous section (introduced by a C<=head> command) does not contain
+any text. This usually indicates that something is missing. Note: A
+C<=head1> followed immediately by C<=head2> does not trigger this warning.
+
=item * Verbatim paragraph in NAME section
The NAME section (C<=head1 NAME>) should consist of a single paragraph
@@ -395,6 +451,10 @@ my %ENTITIES = (
iquest => '¿',
'times' => '×', # times is a keyword in perl
divide => '÷',
+
+# some POD special entities
+ verbar => '|',
+ sol => '/'
);
##---------------------------------------------------------------------------
@@ -413,6 +473,7 @@ sub podchecker( $ ; $ % ) {
## Now create a pod checker
my $checker = new Pod::Checker(%options);
+ $checker->parseopts(-process_cut_cmd => 1);
## Now check the pod document for errors
$checker->parse_from_file($infile, $outfile);
@@ -427,15 +488,15 @@ sub podchecker( $ ; $ % ) {
## Method definitions begin here
##-------------------------------
-sub new {
- my $this = shift;
- my $class = ref($this) || $this;
- my %params = @_;
- my $self = {%params};
- bless $self, $class;
- $self->initialize();
- return $self;
-}
+## sub new {
+## my $this = shift;
+## my $class = ref($this) || $this;
+## my %params = @_;
+## my $self = {%params};
+## bless $self, $class;
+## $self->initialize();
+## return $self;
+## }
sub initialize {
my $self = shift;
@@ -462,6 +523,10 @@ sub poderror {
chomp( my $msg = ($opts{-msg} || "")."@_" );
my $line = (exists $opts{-line}) ? " at line $opts{-line}" : "";
my $file = (exists $opts{-file}) ? " in file $opts{-file}" : "";
+ unless (exists $opts{-severity}) {
+ ## See if can find severity in message prefix
+ $opts{-severity} = $1 if ( $msg =~ s/^\**\s*([A-Z]{3,}):\s+// );
+ }
my $severity = (exists $opts{-severity}) ? "*** $opts{-severity}: " : "";
## Increment error count and print message "
@@ -487,9 +552,12 @@ sub name {
sub node {
my ($self,$text) = @_;
if(defined $text) {
- $text =~ s/[\s\n]+$//; # strip trailing whitespace
- # add node
+ $text =~ s/\s+$//s; # strip trailing whitespace
+ $text =~ s/\s+/ /gs; # collapse whitespace
+ # add node, order important!
push(@{$self->{_nodes}}, $text);
+ # keep also a uniqueness counter
+ $self->{_unique_nodes}->{$text}++;
return $text;
}
@{$self->{_nodes}};
@@ -508,56 +576,63 @@ sub hyperlink {
## overrides for Pod::Parser
sub end_pod {
- ## Do some final checks and
- ## print the number of errors found
- my $self = shift;
- my $infile = $self->input_file();
- my $out_fh = $self->output_handle();
-
- if(@{$self->{_list_stack}}) {
- # _TODO_ display, but don't count them for now
- my $list;
- while($list = shift(@{$self->{_list_stack}})) {
- $self->poderror({ -line => 'EOF', -file => $infile,
- -severity => 'ERROR', -msg => "=over on line " .
- $list->start() . " without closing =back" }); #"
- }
- }
-
- # check validity of document internal hyperlinks
- # first build the node names from the paragraph text
- my %nodes;
- foreach($self->node()) {
- $nodes{$_} = 1;
- if(/^(\S+)\s+/) {
- # we have more than one word. Use the first as a node, too.
- # This is used heavily in perlfunc.pod
- $nodes{$1} ||= 2; # derived node
- }
- }
- foreach($self->hyperlink()) {
- my $line = '';
- s/^(\d+):// && ($line = $1);
- if($_ && !$nodes{$_}) {
- $self->poderror({ -line => $line, -file => $infile,
- -severity => 'ERROR',
- -msg => "unresolved internal link `$_'"});
- }
- }
-
- ## Print the number of errors found
- my $num_errors = $self->num_errors();
- if ($num_errors > 0) {
- printf $out_fh ("$infile has $num_errors pod syntax %s.\n",
+ ## Do some final checks and
+ ## print the number of errors found
+ my $self = shift;
+ my $infile = $self->input_file();
+ my $out_fh = $self->output_handle();
+
+ if(@{$self->{_list_stack}}) {
+ # _TODO_ display, but don't count them for now
+ my $list;
+ while(($list = $self->_close_list('EOF',$infile)) &&
+ $list->indent() ne 'auto') {
+ $self->poderror({ -line => 'EOF', -file => $infile,
+ -severity => 'ERROR', -msg => "=over on line " .
+ $list->start() . " without closing =back" }); #"
+ }
+ }
+
+ # check validity of document internal hyperlinks
+ # first build the node names from the paragraph text
+ my %nodes;
+ foreach($self->node()) {
+ $nodes{$_} = 1;
+ if(/^(\S+)\s+/) {
+ # we have more than one word. Use the first as a node, too.
+ # This is used heavily in perlfunc.pod
+ $nodes{$1} ||= 2; # derived node
+ }
+ }
+ foreach($self->hyperlink()) {
+ my $line = '';
+ s/^(\d+):// && ($line = $1);
+ if($_ && !$nodes{$_}) {
+ $self->poderror({ -line => $line, -file => $infile,
+ -severity => 'ERROR',
+ -msg => "unresolved internal link '$_'"});
+ }
+ }
+ foreach(grep($self->{_unique_nodes}->{$_} > 1,
+ keys %{$self->{_unique_nodes}})) {
+ $self->poderror({ -line => '-', -file => $infile,
+ -severity => 'WARNING',
+ -msg => "multiple occurence of link target '$_'"});
+ }
+
+ ## Print the number of errors found
+ my $num_errors = $self->num_errors();
+ if ($num_errors > 0) {
+ printf $out_fh ("$infile has $num_errors pod syntax %s.\n",
($num_errors == 1) ? "error" : "errors");
- }
- elsif($self->{_commands} == 0) {
- print $out_fh "$infile does not contain any pod commands.\n";
- $self->num_errors(-1);
- }
- else {
- print $out_fh "$infile pod syntax OK.\n";
- }
+ }
+ elsif($self->{_commands} == 0) {
+ print $out_fh "$infile does not contain any pod commands.\n";
+ $self->num_errors(-1);
+ }
+ else {
+ print $out_fh "$infile pod syntax OK.\n";
+ }
}
# check a POD command directive
@@ -568,10 +643,15 @@ sub command {
my $arg; # this will hold the command argument
if (! $VALID_COMMANDS{$cmd}) {
$self->poderror({ -line => $line, -file => $file, -severity => 'ERROR',
- -msg => "Unknown command \"$cmd\"" });
+ -msg => "Unknown command '$cmd'" });
}
else {
- $self->{_commands}++; # found a valid command
+ # found a valid command
+ if(!$self->{_commands}++ && $cmd !~ /^head/) {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'WARNING',
+ -msg => "file does not start with =head" });
+ }
## check syntax of particular command
if($cmd eq 'over') {
# check for argument
@@ -585,10 +665,7 @@ sub command {
-msg => "No numeric argument for =over"});
}
# start a new list
- unshift(@{$self->{_list_stack}}, Pod::List->new(
- -indent => $indent,
- -start => $line,
- -file => $file));
+ $self->_open_list($indent,$line,$file);
}
elsif($cmd eq 'item') {
# are we in a list?
@@ -597,22 +674,60 @@ sub command {
-severity => 'ERROR',
-msg => "=item without previous =over" });
# auto-open in case we encounter many more
- unshift(@{$self->{_list_stack}},
- Pod::List->new(
- -indent => 'auto',
- -start => $line,
- -file => $file));
+ $self->_open_list('auto',$line,$file);
+ }
+ my $list = $self->{_list_stack}->[0];
+ # check whether the previous item had some contents
+ if(defined $self->{_list_item_contents} &&
+ $self->{_list_item_contents} == 0) {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'WARNING',
+ -msg => "previous =item has no contents" });
+ }
+ if($list->{_has_par}) {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'WARNING',
+ -msg => "preceding non-item paragraph(s)" });
+ delete $list->{_has_par};
}
# check for argument
$arg = $self->interpolate_and_check($paragraph, $line, $file);
- unless($arg && $arg =~ /(\S+)/) {
+ if($arg && $arg =~ /(\S+)/) {
+ $arg =~ s/[\s\n]+$//;
+ my $type;
+ if($arg =~ /^[*]\s*(\S*.*)/) {
+ $type = 'bullet';
+ $self->{_list_item_contents} = $1 ? 1 : 0;
+ $arg = $1;
+ }
+ elsif($arg =~ /^\d+\.?\s*(\S*)/) {
+ $type = 'number';
+ $self->{_list_item_contents} = $1 ? 1 : 0;
+ $arg = $1;
+ }
+ else {
+ $type = 'definition';
+ $self->{_list_item_contents} = 1;
+ }
+ my $first = $list->type();
+ if($first && $first ne $type) {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'WARNING',
+ -msg => "=item type mismatch ('$first' vs. '$type')"});
+ }
+ else { # first item
+ $list->type($type);
+ }
+ }
+ else {
$self->poderror({ -line => $line, -file => $file,
-severity => 'WARNING',
-msg => "No argument for =item" });
$arg = ' '; # empty
+ $self->{_list_item_contents} = 0;
}
# add this item
- $self->{_list_stack}[0]->item($arg);
+ $list->item($arg);
# remember this node
$self->node($arg);
}
@@ -628,11 +743,11 @@ sub command {
$arg = $self->interpolate_and_check($paragraph, $line,$file);
if($arg && $arg =~ /\S/) {
$self->poderror({ -line => $line, -file => $file,
- -severity => 'WARNING',
+ -severity => 'ERROR',
-msg => "Spurious character(s) after =back" });
}
# close list
- my $list = shift @{$self->{_list_stack}};
+ my $list = $self->_close_list($line,$file);
# check for empty lists
if(!$list->item() && $self->{-warnings}) {
$self->poderror({ -line => $line, -file => $file,
@@ -642,11 +757,22 @@ sub command {
}
}
}
- elsif($cmd =~ /^head/) {
+ elsif($cmd =~ /^head(\d+)/) {
+ if(defined $self->{_commands_in_head} &&
+ $self->{_commands_in_head} == 0 &&
+ defined $self->{_last_head} &&
+ $self->{_last_head} >= $1) {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'WARNING',
+ -msg => "empty section in previous paragraph"});
+ }
+ $self->{_commands_in_head} = -1;
+ $self->{_last_head} = $1;
# check if there is an open list
if(@{$self->{_list_stack}}) {
my $list;
- while($list = shift(@{$self->{_list_stack}})) {
+ while(($list = $self->_close_list($line,$file)) &&
+ $list->indent() ne 'auto') {
$self->poderror({ -line => $line, -file => $file,
-severity => 'ERROR',
-msg => "=over on line ". $list->start() .
@@ -655,9 +781,14 @@ sub command {
}
# remember this node
$arg = $self->interpolate_and_check($paragraph, $line,$file);
- $self->node($arg) if($arg);
+ $arg =~ s/[\s\n]+$//s;
+ $self->node($arg);
+ unless(length($arg)) {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'ERROR',
+ -msg => "empty =$cmd"});
+ }
if($cmd eq 'head1') {
- $arg =~ s/[\s\n]+$//;
$self->{_current_head1} = $arg;
} else {
$self->{_current_head1} = '';
@@ -711,12 +842,48 @@ sub command {
}
$arg = ''; # do not expand paragraph below
}
+ elsif($cmd =~ /^(pod|cut)$/) {
+ # check for argument
+ $arg = $self->interpolate_and_check($paragraph, $line,$file);
+ if($arg && $arg =~ /(\S+)/) {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'ERROR',
+ -msg => "Spurious text after =$cmd"});
+ }
+ }
+ $self->{_commands_in_head}++;
## Check the interior sequences in the command-text
$self->interpolate_and_check($paragraph, $line,$file)
unless(defined $arg);
}
}
+sub _open_list
+{
+ my ($self,$indent,$line,$file) = @_;
+ my $list = Pod::List->new(
+ -indent => $indent,
+ -start => $line,
+ -file => $file);
+ unshift(@{$self->{_list_stack}}, $list);
+ undef $self->{_list_item_contents};
+ $list;
+}
+
+sub _close_list
+{
+ my ($self,$line,$file) = @_;
+ my $list = shift(@{$self->{_list_stack}});
+ if(defined $self->{_list_item_contents} &&
+ $self->{_list_item_contents} == 0) {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'WARNING',
+ -msg => "previous =item has no contents" });
+ }
+ undef $self->{_list_item_contents};
+ $list;
+}
+
# process a block of some text
sub interpolate_and_check {
my ($self, $paragraph, $line, $file) = @_;
@@ -754,7 +921,7 @@ sub _check_ptree {
if (! $VALID_SEQUENCES{$cmd}) {
$self->poderror({ -line => $line, -file => $file,
-severity => 'ERROR',
- -msg => qq(Unknown interior-sequence "$cmd")});
+ -msg => qq(Unknown interior-sequence '$cmd')});
# expand it anyway
$text .= $self->_check_ptree($contents, $line, $file, "$nestlist$cmd");
next;
@@ -775,9 +942,28 @@ sub _check_ptree {
next;
}
my $ent = $$contents[0];
- if($ent =~ /^\d+$/) {
+ my $val;
+ if($ent =~ /^0x[0-9a-f]+$/i) {
+ # hexadec entity
+ $val = hex($ent);
+ }
+ elsif($ent =~ /^0\d+$/) {
+ # octal
+ $val = oct($ent);
+ }
+ elsif($ent =~ /^\d+$/) {
# numeric entity
- $text .= chr($ent);
+ $val = $ent;
+ }
+ if(defined $val) {
+ if($val>0 && $val<256) {
+ $text .= chr($val);
+ }
+ else {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'ERROR',
+ -msg => "Entity number out of range " . $_->raw_text()});
+ }
}
elsif($ENTITIES{$ent}) {
# known ISO entity
@@ -786,7 +972,7 @@ sub _check_ptree {
else {
$self->poderror({ -line => $line, -file => $file,
-severity => 'WARNING',
- -msg => "Non-standard entity " . $_->raw_text()});
+ -msg => "Unknown entity " . $_->raw_text()});
$text .= "E<$ent>";
}
}
@@ -824,8 +1010,15 @@ sub _check_ptree {
# add the guts
$text .= $self->_check_ptree($contents, $line, $file, "$nestlist$cmd");
}
- else {
- # check, but add nothing to $text (X<>, Z<>)
+ elsif($cmd eq 'Z') {
+ if(length($contents->raw_text())) {
+ $self->poderror({ -line => $line, -file => $file,
+ -severity => 'ERROR',
+ -msg => "Nonempty Z<>"});
+ }
+ }
+ else { # X<>
+ # check, but add nothing to $text
$self->_check_ptree($contents, $line, $file, "$nestlist$cmd");
}
}
@@ -836,8 +1029,11 @@ sub _check_ptree {
# process a block of verbatim text
sub verbatim {
- ## Nothing to check
+ ## Nothing particular to check
my ($self, $paragraph, $line_num, $pod_para) = @_;
+
+ $self->_preproc_par($paragraph);
+
if($self->{_current_head1} eq 'NAME') {
my ($file, $line) = $pod_para->file_line;
$self->poderror({ -line => $line, -file => $file,
@@ -851,6 +1047,8 @@ sub textblock {
my ($self, $paragraph, $line_num, $pod_para) = @_;
my ($file, $line) = $pod_para->file_line;
+ $self->_preproc_par($paragraph);
+
# skip this paragraph if in a =begin block
unless($self->{_have_begin}) {
my $block = $self->interpolate_and_check($paragraph, $line,$file);
@@ -863,4 +1061,18 @@ sub textblock {
}
}
+sub _preproc_par
+{
+ my $self = shift;
+ $_[0] =~ s/[\s\n]+$//;
+ if($_[0]) {
+ $self->{_commands_in_head}++;
+ $self->{_list_item_contents}++ if(defined $self->{_list_item_contents});
+ if(@{$self->{_list_stack}} && !$self->{_list_stack}->[0]->item()) {
+ $self->{_list_stack}->[0]->{_has_par} = 1;
+ }
+ }
+}
+
1;
+
diff --git a/lib/Pod/Find.pm b/lib/Pod/Find.pm
index 399bbba252..038b090b42 100644
--- a/lib/Pod/Find.pm
+++ b/lib/Pod/Find.pm
@@ -3,7 +3,8 @@
#
# Author: Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
#
-# borrowing code from Nick Ing-Simmon's PodToHtml
+# Copyright (C) 1999-2000 by Marek Rouchal (and borrowing code
+# from Nick Ing-Simmon's PodToHtml). All rights reserved.
# This file is part of "PodParser". Pod::Find is free software;
# you can redistribute it and/or modify it under the same terms
# as Perl itself.
@@ -12,8 +13,8 @@
package Pod::Find;
use vars qw($VERSION);
-$VERSION = 0.10; ## Current version of this package
-require 5.005; ## requires this Perl version or later
+$VERSION = 0.11; ## Current version of this package
+require 5.004; ## requires this Perl version or later
#############################################################################
@@ -113,7 +114,9 @@ use vars qw(@ISA @EXPORT_OK $VERSION);
# package global variables
my $SIMPLIFY_RX;
-# return a hash of the
+# return a hash of the POD files found
+# first argument may be a hashref (options),
+# rest is a list of directories to search recursively
sub pod_find
{
my %opts;
@@ -145,7 +148,8 @@ sub pod_find
# * remove e.g. 5.00503
# * remove pod/ if followed by *.pod (e.g. in pod/perlfunc.pod)
$SIMPLIFY_RX =
- qr!^(?i:site_perl/|$Config::Config{archname}/|\d+\.\d+([_.]?\d+)?/|pod/(?=.*?\.pod$))*!o;
+ qq!^(?i:site_perl/|\Q$Config::Config{archname}\E/|\\d+\\.\\d+([_.]?\\d+)?/|pod/(?=.*?\\.pod\$))*!;
+
}
my %dirs_visited;
@@ -166,7 +170,7 @@ sub pod_find
}
next;
}
- my $root_rx = qr!^\Q$try\E/!;
+ my $root_rx = qq!^\Q$try\E/!;
File::Find::find( sub {
my $item = $File::Find::name;
if(-d) {
diff --git a/lib/Pod/InputObjects.pm b/lib/Pod/InputObjects.pm
index 1432895e91..174759aa9c 100644
--- a/lib/Pod/InputObjects.pm
+++ b/lib/Pod/InputObjects.pm
@@ -2,7 +2,7 @@
# Pod/InputObjects.pm -- package which defines objects for input streams
# and paragraphs and commands when parsing POD docs.
#
-# Copyright (C) 1996-1999 by Bradford Appleton. All rights reserved.
+# Copyright (C) 1996-2000 by Bradford Appleton. All rights reserved.
# This file is part of "PodParser". PodParser is free software;
# you can redistribute it and/or modify it under the same terms
# as Perl itself.
@@ -11,7 +11,7 @@
package Pod::InputObjects;
use vars qw($VERSION);
-$VERSION = 1.090; ## Current version of this package
+$VERSION = 1.093; ## Current version of this package
require 5.004; ## requires this Perl version or later
#############################################################################
diff --git a/lib/Pod/ParseUtils.pm b/lib/Pod/ParseUtils.pm
index a66e8f5e8b..2b3734fef9 100644
--- a/lib/Pod/ParseUtils.pm
+++ b/lib/Pod/ParseUtils.pm
@@ -1,7 +1,7 @@
#############################################################################
# Pod/ParseUtils.pm -- helpers for POD parsing and conversion
#
-# Copyright (C) 1999 by Marek Rouchal. All rights reserved.
+# Copyright (C) 1999-2000 by Marek Rouchal. All rights reserved.
# This file is part of "PodParser". PodParser is free software;
# you can redistribute it and/or modify it under the same terms
# as Perl itself.
@@ -305,32 +305,38 @@ sub parse {
#warn "DEBUG: link=$_\n";
# only page
- if(m!^(\w+(?:::\w+)*)\s*(\(\w*\)|)$!) {
- $page = $1 . $2;
+ # problem: a lot of people use (), or (1) or the like to indicate
+ # man page sections. But this collides with L<func()> that is supposed
+ # to point to an internal funtion...
+ # I would like the following better, here and below:
+ #if(m!^(\w+(?:::\w+)*)$!) {
+ my $page_rx = '[\w.]+(?:::[\w.]+)*';
+ if(m!^($page_rx)$!o) {
+ $page = $1;
$type = 'page';
}
- # alttext, page and section
- elsif(m!^(.+?)\s*[|]\s*(\w+(?:::\w+)*)\s*(\(\w*\)|)\s*/\s*"(.+)"$!) {
- ($alttext, $page, $node) = ($1, $2 . $3, $4);
+ # alttext, page and "section"
+ elsif(m!^(.+?)\s*[|]\s*($page_rx)\s*/\s*"(.+)"$!o) {
+ ($alttext, $page, $node) = ($1, $2, $3);
$type = 'section';
}
- # page and section
- elsif(m!^(\w+(?:::\w+)*)\s*(\(\w*\)|)\s*/\s*"(.+)"$!) {
- ($page, $node) = ($1 . $2, $3);
+ # page and "section"
+ elsif(m!^($page_rx)\s*/\s*"(.+)"$!o) {
+ ($page, $node) = ($1, $2);
$type = 'section';
}
# page and item
- elsif(m!^(\w+(?:::\w+)*)\s*(\(\w*\)|)\s*/\s*(.+)$!) {
- ($page, $node) = ($1 . $2, $3);
+ elsif(m!^($page_rx)\s*/\s*(.+)$!o) {
+ ($page, $node) = ($1, $2);
$type = 'item';
}
- # only section
- elsif(m!^(?:/\s*|)"(.+)"$!) {
+ # only "section"
+ elsif(m!^/?"(.+)"$!) {
$node = $1;
$type = 'section';
}
# only item
- elsif(m!^/(.+)$!) {
+ elsif(m!^\s*/(.+)$!) {
$node = $1;
$type = 'item';
}
@@ -340,16 +346,16 @@ sub parse {
$type = 'hyperlink';
}
# alttext, page and item
- elsif(m!^(.+?)\s*[|]\s*(\w+(?:::\w+)*)\s*(\(\w*\)|)\s*/\s*(.+)$!) {
- ($alttext, $page, $node) = ($1, $2 . $3, $4);
+ elsif(m!^(.+?)\s*[|]\s*($page_rx)\s*/\s*(.+)$!o) {
+ ($alttext, $page, $node) = ($1, $2, $3);
$type = 'item';
}
# alttext and page
- elsif(m!^(.+?)\s*[|]\s*(\w+(?:::\w+)*)\s*(\(\w*\)|)$!) {
- ($alttext, $page) = ($1, $2 . $3);
+ elsif(m!^(.+?)\s*[|]\s*($page_rx)$!o) {
+ ($alttext, $page) = ($1, $2);
$type = 'page';
}
- # alttext and section
+ # alttext and "section"
elsif(m!^(.+?)\s*[|]\s*(?:/\s*|)"(.+)"$!) {
($alttext, $node) = ($1,$2);
$type = 'section';
@@ -368,9 +374,17 @@ sub parse {
$node = $_;
$type = 'item';
}
+ # collapse whitespace in nodes
+ $node =~ s/\s+/ /gs;
- if($page =~ /[(]\w*[)]$/) {
- $self->warning("section in `$page' deprecated");
+ #if($page =~ /[(]\w*[)]$/) {
+ # $self->warning("section in '$page' deprecated");
+ #}
+ if($node =~ m:[|/]:) {
+ $self->warning("node '$node' contains non-escaped | or /");
+ }
+ if($alttext =~ m:[|/]:) {
+ $self->warning("alternative text '$node' contains non-escaped | or /");
}
$self->{-page} = $page;
$self->{-node} = $node;
@@ -559,18 +573,24 @@ sub link {
my $self = shift;
my $link = $self->page() || '';
if($self->node()) {
+ my $node = $self->node();
+ $text =~ s/\|/E<verbar>/g;
+ $text =~ s:/:E<sol>:g;
if($self->type() eq 'section') {
- $link .= ($link ? '/' : '') . '"' . $self->node() . '"';
+ $link .= ($link ? '/' : '') . '"' . $node . '"';
}
elsif($self->type() eq 'hyperlink') {
$link = $self->node();
}
else { # item
- $link .= '/' . $self->node();
+ $link .= '/' . $node;
}
}
if($self->alttext()) {
- $link = $self->alttext() . '|' . $link;
+ my $text = $self->alttext();
+ $text =~ s/\|/E<verbar>/g;
+ $text =~ s:/:E<sol>:g;
+ $link = "$text|$link";
}
$link;
}
diff --git a/lib/Pod/Parser.pm b/lib/Pod/Parser.pm
index c727142506..bafabba093 100644
--- a/lib/Pod/Parser.pm
+++ b/lib/Pod/Parser.pm
@@ -1,7 +1,7 @@
#############################################################################
# Pod/Parser.pm -- package which defines a base class for parsing POD docs.
#
-# Copyright (C) 1996-1999 by Bradford Appleton. All rights reserved.
+# Copyright (C) 1996-2000 by Bradford Appleton. All rights reserved.
# This file is part of "PodParser". PodParser is free software;
# you can redistribute it and/or modify it under the same terms
# as Perl itself.
@@ -10,7 +10,7 @@
package Pod::Parser;
use vars qw($VERSION);
-$VERSION = 1.091; ## Current version of this package
+$VERSION = 1.093; ## Current version of this package
require 5.004; ## requires this Perl version or later
#############################################################################
@@ -55,9 +55,9 @@ Pod::Parser - base class for creating POD filters and translators
sub interior_sequence {
my ($parser, $seq_command, $seq_argument) = @_;
## Expand an interior sequence; sample actions might be:
- return "*$seq_argument*" if ($seq_command = 'B');
- return "`$seq_argument'" if ($seq_command = 'C');
- return "_${seq_argument}_'" if ($seq_command = 'I');
+ return "*$seq_argument*" if ($seq_command eq 'B');
+ return "`$seq_argument'" if ($seq_command eq 'C');
+ return "_${seq_argument}_'" if ($seq_command eq 'I');
## ... other sequence commands and their resulting text
}
@@ -142,8 +142,8 @@ For the most part, the B<Pod::Parser> base class should be able to
do most of the input parsing for you and leave you free to worry about
how to intepret the commands and translate the result.
-Note that all we have described here in this quick overview is
-the simplest most straightforward use of B<Pod::Parser> to do stream-based
+Note that all we have described here in this quick overview is the
+simplest most straightforward use of B<Pod::Parser> to do stream-based
parsing. It is also possible to use the B<Pod::Parser::parse_text> function
to do more sophisticated tree-based parsing. See L<"TREE-BASED PARSING">.
@@ -599,7 +599,7 @@ Please note that the B<preprocess_line()> method is invoked I<before>
the B<preprocess_paragraph()> method. After all (possibly preprocessed)
lines in a paragraph have been assembled together and either it has been
determined that the paragraph is part of the POD documentation from one
-of the selected sections or the C<-want_nonPODs> option is true,
+of the selected sections or the C<-want_nonPODs> option is true,
then B<preprocess_paragraph()> is invoked.
The base class implementation of this method returns the given text.
@@ -718,13 +718,6 @@ is a reference to the parse-tree object.
=cut
-## This global regex is used to see if the text before a '>' inside
-## an interior sequence looks like '-' or '=', but not '--', '==',
-## '!=', '$-', '$=' or <<op>>=
-use vars qw( $ARROW_RE );
-$ARROW_RE = join('', qw{ (?: [^-+*/=!&|%^x.<>$]= | [^-$]- )$ });
-#$ARROW_RE = qr/(?:[^-+*/=!&|%^x.<>$]+=|[^-$]+-)$/; ## 5.005+ only!
-
sub parse_text {
my $self = shift;
local $_ = '';
@@ -738,7 +731,7 @@ sub parse_text {
my $text = shift;
my $line = shift;
my $file = $self->input_file();
- my ($cmd, $prev) = ('', '');
+ my $cmd = "";
## Convert method calls into closures, for our convenience
my $xseq_sub = $expand_seq;
@@ -757,7 +750,7 @@ sub parse_text {
ref $xseq_sub or $xseq_sub = sub { shift()->$expand_seq(@_) };
ref $xtext_sub or $xtext_sub = sub { shift()->$expand_text(@_) };
ref $xptree_sub or $xptree_sub = sub { shift()->$expand_ptree(@_) };
-
+
## Keep track of the "current" interior sequence, and maintain a stack
## of "in progress" sequences.
##
@@ -769,52 +762,82 @@ sub parse_text {
##
my $seq = Pod::ParseTree->new();
my @seq_stack = ($seq);
+ my ($ldelim, $rdelim) = ('', '');
## Iterate over all sequence starts/stops, newlines, & text
## (NOTE: split with capturing parens keeps the delimiters)
$_ = $text;
- for ( split /([A-Z]<|>|\n)/ ) {
- ## Keep track of line count
- ++$line if ($_ eq "\n");
- ## Look for the beginning of a sequence
- if ( /^([A-Z])(<)$/ ) {
+ my @tokens = split /([A-Z]<(?:<+\s+)?)/;
+ while ( @tokens ) {
+ $_ = shift @tokens;
+ ## Look for the beginning of a sequencd
+ if ( /^([A-Z])(<(?:<+\s+)?)$/ ) {
## Push a new sequence onto the stack of those "in-progress"
+ ($cmd, $ldelim) = ($1, $2);
$seq = Pod::InteriorSequence->new(
- -name => ($cmd = $1),
- -ldelim => $2, -rdelim => '',
- -file => $file, -line => $line
+ -name => $cmd,
+ -ldelim => $ldelim, -rdelim => '',
+ -file => $file, -line => $line
);
+ $ldelim =~ s/\s+$//, ($rdelim = $ldelim) =~ tr/</>/;
(@seq_stack > 1) and $seq->nested($seq_stack[-1]);
push @seq_stack, $seq;
}
- ## Look for sequence ending (preclude '->' and '=>' inside C<...>)
- elsif ( (@seq_stack > 1) and
- /^>$/ and ($cmd ne 'C' or $prev !~ /$ARROW_RE/o) )
- {
- ## End of current sequence, record terminating delimiter
- $seq->rdelim($_);
- ## Pop it off the stack of "in progress" sequences
- pop @seq_stack;
- ## Append result to its parent in current parse tree
- $seq_stack[-1]->append($expand_seq ? &$xseq_sub($self,$seq) : $seq);
- ## Remember the current cmd-name
- $cmd = (@seq_stack > 1) ? $seq_stack[-1]->name : '';
+ ## Look for sequence ending
+ elsif ( @seq_stack > 1 ) {
+ ## Make sure we match the right kind of closing delimiter
+ my ($seq_end, $post_seq) = ("", "");
+ if ( ($ldelim eq '<' and /\A(.*?)(>)/s)
+ or /\A(.*?)(\s+$rdelim)/s )
+ {
+ ## Found end-of-sequence, capture the interior and the
+ ## closing the delimiter, and put the rest back on the
+ ## token-list
+ $post_seq = substr($_, length($1) + length($2));
+ ($_, $seq_end) = ($1, $2);
+ (length $post_seq) and unshift @tokens, $post_seq;
+ }
+ if (length) {
+ ## In the middle of a sequence, append this text to it, and
+ ## dont forget to "expand" it if that's what the caller wanted
+ $seq->append($expand_text ? &$xtext_sub($self,$_,$seq) : $_);
+ $_ .= $seq_end;
+ }
+ if (length $seq_end) {
+ ## End of current sequence, record terminating delimiter
+ $seq->rdelim($seq_end);
+ ## Pop it off the stack of "in progress" sequences
+ pop @seq_stack;
+ ## Append result to its parent in current parse tree
+ $seq_stack[-1]->append($expand_seq ? &$xseq_sub($self,$seq)
+ : $seq);
+ ## Remember the current cmd-name and left-delimiter
+ $cmd = (@seq_stack > 1) ? $seq_stack[-1]->name : '';
+ $ldelim = (@seq_stack > 1) ? $seq_stack[-1]->ldelim : '';
+ $ldelim =~ s/\s+$//, ($rdelim = $ldelim) =~ tr/</>/;
+ }
}
elsif (length) {
## In the middle of a sequence, append this text to it, and
## dont forget to "expand" it if that's what the caller wanted
$seq->append($expand_text ? &$xtext_sub($self,$_,$seq) : $_);
}
- ## Remember the "current" sequence and the previously seen token
- ($seq, $prev) = ( $seq_stack[-1], $_ );
+ ## Keep track of line count
+ $line += tr/\n//;
+ ## Remember the "current" sequence
+ $seq = $seq_stack[-1];
}
## Handle unterminated sequences
my $errorsub = (@seq_stack > 1) ? $self->errorsub() : undef;
while (@seq_stack > 1) {
($cmd, $file, $line) = ($seq->name, $seq->file_line);
+ $ldelim = $seq->ldelim;
+ ($rdelim = $ldelim) =~ tr/</>/;
+ $rdelim =~ s/^(\S+)(\s*)$/$2$1/;
pop @seq_stack;
- my $errmsg = "** Unterminated $cmd<...> at $file line $line\n";
+ my $errmsg = "*** WARNING: unterminated ${cmd}${ldelim}...${rdelim}".
+ " at line $line in file $file\n";
(ref $errorsub) and &{$errorsub}($errmsg)
or (defined $errorsub) and $self->$errorsub($errmsg)
or warn($errmsg);
@@ -1034,9 +1057,20 @@ sub parse_from_filehandle {
++$plines;
}
- ## See of this line is blank and ends the current paragraph.
+ ## See if this line is blank and ends the current paragraph.
## If it isnt, then keep iterating until it is.
- next unless (($textline =~ /^\s*$/) && (length $paragraph));
+ next unless (($textline =~ /^(\s*)$/) && (length $paragraph));
+
+ ## Issue a warning about any non-empty blank lines
+ if ( length($1) > 1 ) {
+ my $errorsub = $self->errorsub();
+ my $file = $self->input_file();
+ my $errmsg = "*** WARNING: line containing nothing but whitespace".
+ " in paragraph at line $nlines in file $file\n";
+ (ref $errorsub) and &{$errorsub}($errmsg)
+ or (defined $errorsub) and $self->$errorsub($errmsg)
+ or warn($errmsg);
+ }
## Now process the paragraph
parse_paragraph($self, $paragraph, ($nlines - $plines) + 1);
diff --git a/lib/Pod/Select.pm b/lib/Pod/Select.pm
index 94ded8697a..150dfca1fe 100644
--- a/lib/Pod/Select.pm
+++ b/lib/Pod/Select.pm
@@ -1,7 +1,7 @@
#############################################################################
# Pod/Select.pm -- function to select portions of POD docs
#
-# Copyright (C) 1996-1999 by Bradford Appleton. All rights reserved.
+# Copyright (C) 1996-2000 by Bradford Appleton. All rights reserved.
# This file is part of "PodParser". PodParser is free software;
# you can redistribute it and/or modify it under the same terms
# as Perl itself.
@@ -10,7 +10,7 @@
package Pod::Select;
use vars qw($VERSION);
-$VERSION = 1.090; ## Current version of this package
+$VERSION = 1.093; ## Current version of this package
require 5.004; ## requires this Perl version or later
#############################################################################
diff --git a/lib/Pod/Usage.pm b/lib/Pod/Usage.pm
index aa3a009dcf..9f01a52ebb 100644
--- a/lib/Pod/Usage.pm
+++ b/lib/Pod/Usage.pm
@@ -1,7 +1,7 @@
#############################################################################
# Pod/Usage.pm -- print usage messages for the running script.
#
-# Copyright (C) 1996-1999 by Bradford Appleton. All rights reserved.
+# Copyright (C) 1996-2000 by Bradford Appleton. All rights reserved.
# This file is part of "PodParser". PodParser is free software;
# you can redistribute it and/or modify it under the same terms
# as Perl itself.
@@ -10,7 +10,7 @@
package Pod::Usage;
use vars qw($VERSION);
-$VERSION = 1.090; ## Current version of this package
+$VERSION = 1.093; ## Current version of this package
require 5.004; ## requires this Perl version or later
=head1 NAME
diff --git a/t/pod/poderrs.t b/t/pod/poderrs.t
index e27130ce39..bec2a198b6 100755
--- a/t/pod/poderrs.t
+++ b/t/pod/poderrs.t
@@ -36,6 +36,11 @@ Camps is very,
entertaining.
And they say we'll have some fun if it stops raining!
+Okay, now use a non-empty blank line to terminate a paragraph and make
+sure we get a warning.
+
+The above blank line contains tabs and spaces only
+
=head1 Additional tests
=head2 item without over
diff --git a/t/pod/poderrs.xr b/t/pod/poderrs.xr
index 157d1306ba..038cf4fb4c 100644
--- a/t/pod/poderrs.xr
+++ b/t/pod/poderrs.xr
@@ -1,32 +1,33 @@
-*** ERROR: Unknown command "unknown1" at line 21 in file pod/poderrs.t
-*** ERROR: Unknown interior-sequence "Q" at line 25 in file pod/poderrs.t
-*** ERROR: Unknown interior-sequence "A" at line 26 in file pod/poderrs.t
-*** ERROR: Unknown interior-sequence "Y" at line 27 in file pod/poderrs.t
-*** ERROR: Unknown interior-sequence "V" at line 27 in file pod/poderrs.t
-** Unterminated B<...> at pod/poderrs.t line 31
-** Unterminated I<...> at pod/poderrs.t line 30
-** Unterminated C<...> at pod/poderrs.t line 33
-*** ERROR: =item without previous =over at line 43 in file pod/poderrs.t
-*** ERROR: =over on line 43 without closing =back (at head2) at line 45 in file pod/poderrs.t
-*** ERROR: =back without previous =over at line 47 in file pod/poderrs.t
-*** ERROR: =over on line 51 without closing =back (at head2) at line 55 in file pod/poderrs.t
-*** ERROR: =end without =begin at line 57 in file pod/poderrs.t
-*** ERROR: Nested =begin's (first at line 61:html) at line 63 in file pod/poderrs.t
-*** ERROR: =end without =begin at line 67 in file pod/poderrs.t
-*** ERROR: nested commands C<...C<...>...> at line 71 in file pod/poderrs.t
-*** ERROR: garbled entity E<alea iacta est> at line 75 in file pod/poderrs.t
-*** ERROR: garbled entity E<C<auml>> at line 76 in file pod/poderrs.t
-*** ERROR: garbled entity E<abcI<bla>> at line 77 in file pod/poderrs.t
-*** WARNING: collapsing newlines to blanks at line 87 in file pod/poderrs.t
-*** ERROR: malformed link L<> : empty link at line 89 in file pod/poderrs.t
-*** WARNING: section in `passwd(5)' deprecated at line 94 in file pod/poderrs.t
-*** WARNING: ignoring leading whitespace in link at line 95 in file pod/poderrs.t
-*** WARNING: ignoring trailing whitespace in link at line 95 in file pod/poderrs.t
-*** WARNING: Spurious character(s) after =back at line 101 in file pod/poderrs.t
-*** WARNING: No items in =over (at line 109) / =back list at line 111 in file pod/poderrs.t
-*** WARNING: 2 unescaped <> in paragraph at line 113 in file pod/poderrs.t
-*** ERROR: unresolved internal link `begin or begin' at line 81 in file pod/poderrs.t
-*** ERROR: unresolved internal link `end with begin' at line 82 in file pod/poderrs.t
-*** ERROR: unresolved internal link `OoPs' at line 83 in file pod/poderrs.t
-*** ERROR: unresolved internal link `abc def' at line 87 in file pod/poderrs.t
-pod/poderrs.t has 24 pod syntax errors.
+*** ERROR: Unknown command 'unknown1' at line 21 in file pod/poderrs.t
+*** ERROR: Unknown interior-sequence 'Q' at line 25 in file pod/poderrs.t
+*** ERROR: Unknown interior-sequence 'A' at line 26 in file pod/poderrs.t
+*** ERROR: Unknown interior-sequence 'Y' at line 27 in file pod/poderrs.t
+*** ERROR: Unknown interior-sequence 'V' at line 27 in file pod/poderrs.t
+*** WARNING: unterminated B<...> at line 31 in file pod/poderrs.t
+*** WARNING: unterminated I<...> at line 30 in file pod/poderrs.t
+*** WARNING: unterminated C<...> at line 33 in file pod/poderrs.t
+*** WARNING: line containing nothing but whitespace in paragraph at line 41 in file pod/poderrs.t
+*** ERROR: =item without previous =over at line 48 in file pod/poderrs.t
+*** ERROR: =back without previous =over at line 52 in file pod/poderrs.t
+*** ERROR: =over on line 56 without closing =back (at head2) at line 60 in file pod/poderrs.t
+*** ERROR: =end without =begin at line 62 in file pod/poderrs.t
+*** ERROR: Nested =begin's (first at line 66:html) at line 68 in file pod/poderrs.t
+*** ERROR: =end without =begin at line 72 in file pod/poderrs.t
+*** ERROR: nested commands C<...C<...>...> at line 76 in file pod/poderrs.t
+*** ERROR: garbled entity E<alea iacta est> at line 80 in file pod/poderrs.t
+*** ERROR: garbled entity E<C<auml>> at line 81 in file pod/poderrs.t
+*** ERROR: garbled entity E<abcI<bla>> at line 82 in file pod/poderrs.t
+*** WARNING: collapsing newlines to blanks at line 92 in file pod/poderrs.t
+*** ERROR: malformed link L<> : empty link at line 94 in file pod/poderrs.t
+*** WARNING: section in 'passwd(5)' deprecated at line 99 in file pod/poderrs.t
+*** WARNING: ignoring leading whitespace in link at line 100 in file pod/poderrs.t
+*** WARNING: ignoring trailing whitespace in link at line 100 in file pod/poderrs.t
+*** ERROR: Spurious character(s) after =back at line 106 in file pod/poderrs.t
+*** WARNING: No items in =over (at line 114) / =back list at line 116 in file pod/poderrs.t
+*** WARNING: 2 unescaped <> in paragraph at line 118 in file pod/poderrs.t
+*** ERROR: unresolved internal link 'begin or begin' at line 86 in file pod/poderrs.t
+*** ERROR: unresolved internal link 'end with begin' at line 87 in file pod/poderrs.t
+*** ERROR: unresolved internal link 'OoPs' at line 88 in file pod/poderrs.t
+*** ERROR: unresolved internal link 'abc def' at line 92 in file pod/poderrs.t
+*** WARNING: multiple occurence of link target 'oops' at line - in file pod/poderrs.t
+pod/poderrs.t has 21 pod syntax errors.
diff --git a/t/pod/special_seqs.t b/t/pod/special_seqs.t
index 572fb8c061..b8af57ee05 100755
--- a/t/pod/special_seqs.t
+++ b/t/pod/special_seqs.t
@@ -17,10 +17,16 @@ __END__
=pod
This is a test to see if I can do not only C<$self> and C<method()>, but
-also C<$self->method()> and C<$self->{FIELDNAME}> and C<{FOO=>BAR}> without
-resorting to escape sequences.
+also C<< $self->method() >> and C<< $self->{FIELDNAME} >> and
+C<< $Foo <=> $Bar >> without resorting to escape sequences. If
+I want to refer to the right-shift operator I can do something
+like C<<< $x >> 3 >>> or even C<<<< $y >> 5 >>>>.
-Now for the grand finale of C<$self->method()->{FIELDNAME} = {FOO=>BAR}>.
+Now for the grand finale of C<< $self->method()->{FIELDNAME} = {FOO=>BAR} >>.
+And I also want to make sure that newlines work like this
+C<<<
+$self->{FOOBAR} >> 3 and [$b => $a]->[$a <=> $b]
+>>>
Of course I should still be able to do all this I<with> escape sequences
too: C<$self-E<gt>method()> and C<$self-E<gt>{FIELDNAME}> and C<{FOO=E<gt>BAR}>.
@@ -29,4 +35,9 @@ Dont forget C<$self-E<gt>method()-E<gt>{FIELDNAME} = {FOO=E<gt>BAR}>.
And make sure that C<0> works too!
+Now, if I use << or >> as my delimiters, then I have to use whitespace.
+So things like C<<$self->method()>> and C<<$self->{FIELDNAME}>> wont end
+up doing what you might expect since the first > will still terminate
+the first < seen.
+
=cut
diff --git a/t/pod/special_seqs.xr b/t/pod/special_seqs.xr
index fc06593d9d..a07f4cf417 100644
--- a/t/pod/special_seqs.xr
+++ b/t/pod/special_seqs.xr
@@ -1,8 +1,12 @@
This is a test to see if I can do not only `$self' and `method()', but
- also `$self->method()' and `$self->{FIELDNAME}' and `{FOO=>BAR}' without
- resorting to escape sequences.
+ also `$self->method()' and `$self->{FIELDNAME}' and `$Foo <=> $Bar'
+ without resorting to escape sequences. If I want to refer to the
+ right-shift operator I can do something like `$x >> 3' or even `$y >>
+ 5'.
Now for the grand finale of `$self->method()->{FIELDNAME} = {FOO=>BAR}'.
+ And I also want to make sure that newlines work like this
+ `$self->{FOOBAR} >> 3 and [$b => $a]->[$a <=> $b]'
Of course I should still be able to do all this *with* escape sequences
too: `$self->method()' and `$self->{FIELDNAME}' and `{FOO=>BAR}'.
@@ -11,3 +15,8 @@
And make sure that `0' works too!
+ Now, if I use << or >> as my delimiters, then I have to use whitespace.
+ So things like `<$self-'method()>> and `<$self-'{FIELDNAME}>> wont end
+ up doing what you might expect since the first > will still terminate
+ the first < seen.
+
View Lorry Controller Status