initial checkin

git-svn-id: http://pexpect.svn.sourceforge.net/svnroot/pexpect/trunk@2 656d521f-e311-0410-88e0-e7920216d269

11 files changed, 204 insertions, 0 deletions

diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist
new file mode 100644
index 0000000..b04b350
--- /dev/null
+++ b/CVSROOT/checkoutlist
@@ -0,0 +1,13 @@
+# The "checkoutlist" file is used to support additional version controlled
+# administrative files in $CVSROOT/CVSROOT, such as template files.
+#
+# The first entry on a line is a filename which will be checked out from
+# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
+# The remainder of the line is an error message to use if the file cannot
+# be checked out.
+#
+# File format:
+#
+#	[<whitespace>]<filename><whitespace><error message><end-of-line>
+#
+# comment lines begin with '#'
diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo
new file mode 100644
index 0000000..b19e7b7
--- /dev/null
+++ b/CVSROOT/commitinfo
@@ -0,0 +1,15 @@
+# The "commitinfo" file is used to control pre-commit checks.
+# The filter on the right is invoked with the repository and a list 
+# of files to check.  A non-zero exit of the filter program will 
+# cause the commit to be aborted.
+#
+# The first entry on a line is a regular expression which is tested
+# against the directory that the change is being committed to, relative
+# to the $CVSROOT.  For the first match that is found, then the remainder
+# of the line is the name of the filter to run.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name "ALL" appears as a regular expression it is always used
+# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/config b/CVSROOT/config
new file mode 100644
index 0000000..ff43ec0
--- /dev/null
+++ b/CVSROOT/config
@@ -0,0 +1,14 @@
+# Set this to "no" if pserver shouldn't check system users/passwords
+#SystemAuth=no
+
+# Put CVS lock files in this directory rather than directly in the repository.
+#LockDir=/var/lock/cvs
+
+# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
+# level of the new working directory when using the `cvs checkout'
+# command.
+#TopLevelAdmin=no
+
+# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
+# history file, or a subset as needed (ie `TMAR' logs all write operations)
+#LogHistory=TOFEWGCMAR
diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers
new file mode 100644
index 0000000..0accaf1
--- /dev/null
+++ b/CVSROOT/cvswrappers
@@ -0,0 +1,23 @@
+# This file affects handling of files based on their names.
+#
+# The -t/-f options allow one to treat directories of files
+# as a single file, or to transform a file in other ways on
+# its way in and out of CVS.
+#
+# The -m option specifies whether CVS attempts to merge files.
+#
+# The -k option specifies keyword expansion (e.g. -kb for binary).
+#
+# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
+#
+#  wildcard	[option value][option value]...
+#
+#  where option is one of
+#  -f		from cvs filter		value: path to filter
+#  -t		to cvs filter		value: path to filter
+#  -m		update methodology	value: MERGE or COPY
+#  -k		expansion mode		value: b, o, kkv, &c
+#
+#  and value is a single-quote delimited value.
+# For example:
+#*.gif -k 'b'
diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo
new file mode 100644
index 0000000..d78886c
--- /dev/null
+++ b/CVSROOT/editinfo
@@ -0,0 +1,21 @@
+# The "editinfo" file is used to allow verification of logging
+# information.  It works best when a template (as specified in the
+# rcsinfo file) is provided for the logging procedure.  Given a
+# template with locations for, a bug-id number, a list of people who
+# reviewed the code before it can be checked in, and an external
+# process to catalog the differences that were code reviewed, the
+# following test can be applied to the code:
+#
+#   Making sure that the entered bug-id number is correct.
+#   Validating that the code that was reviewed is indeed the code being
+#       checked in (using the bug-id number or a seperate review
+#       number to identify this particular code set.).
+#
+# If any of the above test failed, then the commit would be aborted.
+#
+# Actions such as mailing a copy of the report to each reviewer are
+# better handled by an entry in the loginfo file.
+#
+# One thing that should be noted is the the ALL keyword is not
+# supported.  There can be only one entry that matches a given
+# repository.
diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo
new file mode 100644
index 0000000..5a59f0a
--- /dev/null
+++ b/CVSROOT/loginfo
@@ -0,0 +1,26 @@
+# The "loginfo" file controls where "cvs commit" log information
+# is sent.  The first entry on a line is a regular expression which must match
+# the directory that the change is being made to, relative to the
+# $CVSROOT.  If a match is found, then the remainder of the line is a filter
+# program that should expect log information on its standard input.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name ALL appears as a regular expression it is always used
+# in addition to the first matching regex or DEFAULT.
+#
+# You may specify a format string as part of the
+# filter.  The string is composed of a `%' followed
+# by a single format character, or followed by a set of format
+# characters surrounded by `{' and `}' as separators.  The format
+# characters are:
+#
+#   s = file name
+#   V = old version number (pre-checkin)
+#   v = new version number (post-checkin)
+#
+# For example:
+#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
+# or
+#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
diff --git a/CVSROOT/modules b/CVSROOT/modules
new file mode 100644
index 0000000..cb9e9ef
--- /dev/null
+++ b/CVSROOT/modules
@@ -0,0 +1,26 @@
+# Three different line formats are valid:
+#	key	-a    aliases...
+#	key [options] directory
+#	key [options] directory files...
+#
+# Where "options" are composed of:
+#	-i prog		Run "prog" on "cvs commit" from top-level of module.
+#	-o prog		Run "prog" on "cvs checkout" of module.
+#	-e prog		Run "prog" on "cvs export" of module.
+#	-t prog		Run "prog" on "cvs rtag" of module.
+#	-u prog		Run "prog" on "cvs update" of module.
+#	-d dir		Place module in directory "dir" instead of module name.
+#	-l		Top-level directory only -- do not recurse.
+#
+# NOTE:  If you change any of the "Run" options above, you'll have to
+# release and re-checkout any working directories of these modules.
+#
+# And "directory" is a path to a directory relative to $CVSROOT.
+#
+# The "-a" option specifies an alias.  An alias is interpreted as if
+# everything on the right of the "-a" had been typed on the command line.
+#
+# You can encode a module within a module by using the special '&'
+# character to interpose another module into the current module.  This
+# can be useful for creating a module that consists of many directories
+# spread out over the entire source repository.
diff --git a/CVSROOT/notify b/CVSROOT/notify
new file mode 100644
index 0000000..34f0bc2
--- /dev/null
+++ b/CVSROOT/notify
@@ -0,0 +1,12 @@
+# The "notify" file controls where notifications from watches set by
+# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
+# a regular expression which is tested against the directory that the
+# change is being made to, relative to the $CVSROOT.  If it matches,
+# then the remainder of the line is a filter program that should contain
+# one occurrence of %s for the user to notify, and information on its
+# standard input.
+#
+# "ALL" or "DEFAULT" can be used in place of the regular expression.
+#
+# For example:
+#ALL mail %s -s "CVS notification"
diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo
new file mode 100644
index 0000000..49e59f4
--- /dev/null
+++ b/CVSROOT/rcsinfo
@@ -0,0 +1,13 @@
+# The "rcsinfo" file is used to control templates with which the editor
+# is invoked on commit and import.
+#
+# The first entry on a line is a regular expression which is tested
+# against the directory that the change is being made to, relative to the
+# $CVSROOT.  For the first match that is found, then the remainder of the
+# line is the name of the file that contains the template.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name "ALL" appears as a regular expression it is always used
+# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo
new file mode 100644
index 0000000..274a46d
--- /dev/null
+++ b/CVSROOT/taginfo
@@ -0,0 +1,20 @@
+# The "taginfo" file is used to control pre-tag checks.
+# The filter on the right is invoked with the following arguments:
+#
+# $1 -- tagname
+# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
+# $3 -- repository
+# $4->  file revision [file revision ...]
+#
+# A non-zero exit of the filter program will cause the tag to be aborted.
+#
+# The first entry on a line is a regular expression which is tested
+# against the directory that the change is being committed to, relative
+# to the $CVSROOT.  For the first match that is found, then the remainder
+# of the line is the name of the filter to run.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name "ALL" appears as a regular expression it is always used
+# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg
new file mode 100644
index 0000000..86f747c
--- /dev/null
+++ b/CVSROOT/verifymsg
@@ -0,0 +1,21 @@
+# The "verifymsg" file is used to allow verification of logging
+# information.  It works best when a template (as specified in the
+# rcsinfo file) is provided for the logging procedure.  Given a
+# template with locations for, a bug-id number, a list of people who
+# reviewed the code before it can be checked in, and an external
+# process to catalog the differences that were code reviewed, the
+# following test can be applied to the code:
+#
+#   Making sure that the entered bug-id number is correct.
+#   Validating that the code that was reviewed is indeed the code being
+#       checked in (using the bug-id number or a seperate review
+#       number to identify this particular code set.).
+#
+# If any of the above test failed, then the commit would be aborted.
+#
+# Actions such as mailing a copy of the report to each reviewer are
+# better handled by an entry in the loginfo file.
+#
+# One thing that should be noted is the the ALL keyword is not
+# supported.  There can be only one entry that matches a given
+# repository.