diff options
Diffstat (limited to 'ext/pcre/pcrelib/doc')
| -rw-r--r-- | ext/pcre/pcrelib/doc/Tech.Notes | 348 | ||||
| -rw-r--r-- | ext/pcre/pcrelib/doc/pcre.txt | 5153 |
2 files changed, 0 insertions, 5501 deletions
diff --git a/ext/pcre/pcrelib/doc/Tech.Notes b/ext/pcre/pcrelib/doc/Tech.Notes deleted file mode 100644 index 21dbe1f9b5..0000000000 --- a/ext/pcre/pcrelib/doc/Tech.Notes +++ /dev/null @@ -1,348 +0,0 @@ -Technical Notes about PCRE --------------------------- - -These are very rough technical notes that record potentially useful information -about PCRE internals. - -Historical note 1 ------------------ - -Many years ago I implemented some regular expression functions to an algorithm -suggested by Martin Richards. These were not Unix-like in form, and were quite -restricted in what they could do by comparison with Perl. The interesting part -about the algorithm was that the amount of space required to hold the compiled -form of an expression was known in advance. The code to apply an expression did -not operate by backtracking, as the original Henry Spencer code and current -Perl code does, but instead checked all possibilities simultaneously by keeping -a list of current states and checking all of them as it advanced through the -subject string. In the terminology of Jeffrey Friedl's book, it was a "DFA -algorithm". When the pattern was all used up, all remaining states were -possible matches, and the one matching the longest subset of the subject string -was chosen. This did not necessarily maximize the individual wild portions of -the pattern, as is expected in Unix and Perl-style regular expressions. - -Historical note 2 ------------------ - -By contrast, the code originally written by Henry Spencer (which was -subsequently heavily modified for Perl) compiles the expression twice: once in -a dummy mode in order to find out how much store will be needed, and then for -real. (The Perl version probably doesn't do this any more; I'm talking about -the original library.) The execution function operates by backtracking and -maximizing (or, optionally, minimizing in Perl) the amount of the subject that -matches individual wild portions of the pattern. This is an "NFA algorithm" in -Friedl's terminology. - -OK, here's the real stuff -------------------------- - -For the set of functions that form the "basic" PCRE library (which are -unrelated to those mentioned above), I tried at first to invent an algorithm -that used an amount of store bounded by a multiple of the number of characters -in the pattern, to save on compiling time. However, because of the greater -complexity in Perl regular expressions, I couldn't do this. In any case, a -first pass through the pattern is needed, for a number of reasons. PCRE works -by running a very degenerate first pass to calculate a maximum store size, and -then a second pass to do the real compile - which may use a bit less than the -predicted amount of store. The idea is that this is going to turn out faster -because the first pass is degenerate and the second pass can just store stuff -straight into the vector, which it knows is big enough. It does make the -compiling functions bigger, of course, but they have become quite big anyway to -handle all the Perl stuff. - -Traditional matching function ------------------------------ - -The "traditional", and original, matching function is called pcre_exec(), and -it implements an NFA algorithm, similar to the original Henry Spencer algorithm -and the way that Perl works. Not surprising, since it is intended to be as -compatible with Perl as possible. This is the function most users of PCRE will -use most of the time. - -Supplementary matching function -------------------------------- - -From PCRE 6.0, there is also a supplementary matching function called -pcre_dfa_exec(). This implements a DFA matching algorithm that searches -simultaneously for all possible matches that start at one point in the subject -string. (Going back to my roots: see Historical Note 1 above.) This function -intreprets the same compiled pattern data as pcre_exec(); however, not all the -facilities are available, and those that are do not always work in quite the -same way. See the user documentation for details. - -Format of compiled patterns ---------------------------- - -The compiled form of a pattern is a vector of bytes, containing items of -variable length. The first byte in an item is an opcode, and the length of the -item is either implicit in the opcode or contained in the data bytes that -follow it. - -In many cases below "two-byte" data values are specified. This is in fact just -a default. PCRE can be compiled to use 3-byte or 4-byte values (impairing the -performance). This is necessary only when patterns whose compiled length is -greater than 64K are going to be processed. In this description, we assume the -"normal" compilation options. - -A list of all the opcodes follows: - -Opcodes with no following data ------------------------------- - -These items are all just one byte long - - OP_END end of pattern - OP_ANY match any character - OP_ANYBYTE match any single byte, even in UTF-8 mode - OP_SOD match start of data: \A - OP_SOM, start of match (subject + offset): \G - OP_CIRC ^ (start of data, or after \n in multiline) - OP_NOT_WORD_BOUNDARY \W - OP_WORD_BOUNDARY \w - OP_NOT_DIGIT \D - OP_DIGIT \d - OP_NOT_WHITESPACE \S - OP_WHITESPACE \s - OP_NOT_WORDCHAR \W - OP_WORDCHAR \w - OP_EODN match end of data or \n at end: \Z - OP_EOD match end of data: \z - OP_DOLL $ (end of data, or before \n in multiline) - OP_EXTUNI match an extended Unicode character - - -Repeating single characters ---------------------------- - -The common repeats (*, +, ?) when applied to a single character use the -following opcodes: - - OP_STAR - OP_MINSTAR - OP_PLUS - OP_MINPLUS - OP_QUERY - OP_MINQUERY - -In ASCII mode, these are two-byte items; in UTF-8 mode, the length is variable. -Those with "MIN" in their name are the minimizing versions. Each is followed by -the character that is to be repeated. Other repeats make use of - - OP_UPTO - OP_MINUPTO - OP_EXACT - -which are followed by a two-byte count (most significant first) and the -repeated character. OP_UPTO matches from 0 to the given number. A repeat with a -non-zero minimum and a fixed maximum is coded as an OP_EXACT followed by an -OP_UPTO (or OP_MINUPTO). - - -Repeating character types -------------------------- - -Repeats of things like \d are done exactly as for single characters, except -that instead of a character, the opcode for the type is stored in the data -byte. The opcodes are: - - OP_TYPESTAR - OP_TYPEMINSTAR - OP_TYPEPLUS - OP_TYPEMINPLUS - OP_TYPEQUERY - OP_TYPEMINQUERY - OP_TYPEUPTO - OP_TYPEMINUPTO - OP_TYPEEXACT - - -Match by Unicode property -------------------------- - -OP_PROP and OP_NOTPROP are used for positive and negative matches of a -character by testing its Unicode property (the \p and \P escape sequences). -Each is followed by two bytes that encode the desired property as a type and a -value. - -Repeats of these items use the OP_TYPESTAR etc. set of opcodes, followed by -three bytes: OP_PROP or OP_NOTPROP and then the desired property type and -value. - - -Matching literal characters ---------------------------- - -The OP_CHAR opcode is followed by a single character that is to be matched -casefully. For caseless matching, OP_CHARNC is used. In UTF-8 mode, the -character may be more than one byte long. (Earlier versions of PCRE used -multi-character strings, but this was changed to allow some new features to be -added.) - - -Character classes ------------------ - -If there is only one character, OP_CHAR or OP_CHARNC is used for a positive -class, and OP_NOT for a negative one (that is, for something like [^a]). -However, in UTF-8 mode, the use of OP_NOT applies only to characters with -values < 128, because OP_NOT is confined to single bytes. - -Another set of repeating opcodes (OP_NOTSTAR etc.) are used for a repeated, -negated, single-character class. The normal ones (OP_STAR etc.) are used for a -repeated positive single-character class. - -When there's more than one character in a class and all the characters are less -than 256, OP_CLASS is used for a positive class, and OP_NCLASS for a negative -one. In either case, the opcode is followed by a 32-byte bit map containing a 1 -bit for every character that is acceptable. The bits are counted from the least -significant end of each byte. - -The reason for having both OP_CLASS and OP_NCLASS is so that, in UTF-8 mode, -subject characters with values greater than 256 can be handled correctly. For -OP_CLASS they don't match, whereas for OP_NCLASS they do. - -For classes containing characters with values > 255, OP_XCLASS is used. It -optionally uses a bit map (if any characters lie within it), followed by a list -of pairs and single characters. There is a flag character than indicates -whether it's a positive or a negative class. - - -Back references ---------------- - -OP_REF is followed by two bytes containing the reference number. - - -Repeating character classes and back references ------------------------------------------------ - -Single-character classes are handled specially (see above). This applies to -OP_CLASS and OP_REF. In both cases, the repeat information follows the base -item. The matching code looks at the following opcode to see if it is one of - - OP_CRSTAR - OP_CRMINSTAR - OP_CRPLUS - OP_CRMINPLUS - OP_CRQUERY - OP_CRMINQUERY - OP_CRRANGE - OP_CRMINRANGE - -All but the last two are just single-byte items. The others are followed by -four bytes of data, comprising the minimum and maximum repeat counts. - - -Brackets and alternation ------------------------- - -A pair of non-capturing (round) brackets is wrapped round each expression at -compile time, so alternation always happens in the context of brackets. - -Non-capturing brackets use the opcode OP_BRA, while capturing brackets use -OP_BRA+1, OP_BRA+2, etc. [Note for North Americans: "bracket" to some English -speakers, including myself, can be round, square, curly, or pointy. Hence this -usage.] - -Originally PCRE was limited to 99 capturing brackets (so as not to use up all -the opcodes). From release 3.5, there is no limit. What happens is that the -first ones, up to EXTRACT_BASIC_MAX are handled with separate opcodes, as -above. If there are more, the opcode is set to EXTRACT_BASIC_MAX+1, and the -first operation in the bracket is OP_BRANUMBER, followed by a 2-byte bracket -number. This opcode is ignored while matching, but is fished out when handling -the bracket itself. (They could have all been done like this, but I was making -minimal changes.) - -A bracket opcode is followed by LINK_SIZE bytes which give the offset to the -next alternative OP_ALT or, if there aren't any branches, to the matching -OP_KET opcode. Each OP_ALT is followed by LINK_SIZE bytes giving the offset to -the next one, or to the OP_KET opcode. - -OP_KET is used for subpatterns that do not repeat indefinitely, while -OP_KETRMIN and OP_KETRMAX are used for indefinite repetitions, minimally or -maximally respectively. All three are followed by LINK_SIZE bytes giving (as a -positive number) the offset back to the matching OP_BRA opcode. - -If a subpattern is quantified such that it is permitted to match zero times, it -is preceded by one of OP_BRAZERO or OP_BRAMINZERO. These are single-byte -opcodes which tell the matcher that skipping this subpattern entirely is a -valid branch. - -A subpattern with an indefinite maximum repetition is replicated in the -compiled data its minimum number of times (or once with OP_BRAZERO if the -minimum is zero), with the final copy terminating with OP_KETRMIN or OP_KETRMAX -as appropriate. - -A subpattern with a bounded maximum repetition is replicated in a nested -fashion up to the maximum number of times, with OP_BRAZERO or OP_BRAMINZERO -before each replication after the minimum, so that, for example, (abc){2,5} is -compiled as (abc)(abc)((abc)((abc)(abc)?)?)?. - - -Assertions ----------- - -Forward assertions are just like other subpatterns, but starting with one of -the opcodes OP_ASSERT or OP_ASSERT_NOT. Backward assertions use the opcodes -OP_ASSERTBACK and OP_ASSERTBACK_NOT, and the first opcode inside the assertion -is OP_REVERSE, followed by a two byte count of the number of characters to move -back the pointer in the subject string. When operating in UTF-8 mode, the count -is a character count rather than a byte count. A separate count is present in -each alternative of a lookbehind assertion, allowing them to have different -fixed lengths. - - -Once-only subpatterns ---------------------- - -These are also just like other subpatterns, but they start with the opcode -OP_ONCE. - - -Conditional subpatterns ------------------------ - -These are like other subpatterns, but they start with the opcode OP_COND. If -the condition is a back reference, this is stored at the start of the -subpattern using the opcode OP_CREF followed by two bytes containing the -reference number. If the condition is "in recursion" (coded as "(?(R)"), the -same scheme is used, with a "reference number" of 0xffff. Otherwise, a -conditional subpattern always starts with one of the assertions. - - -Recursion ---------- - -Recursion either matches the current regex, or some subexpression. The opcode -OP_RECURSE is followed by an value which is the offset to the starting bracket -from the start of the whole pattern. From release 6.5, OP_RECURSE is -automatically wrapped inside OP_ONCE brackets (because otherwise some patterns -broke it). OP_RECURSE is also used for "subroutine" calls, even though they -are not strictly a recursion. - - -Callout -------- - -OP_CALLOUT is followed by one byte of data that holds a callout number in the -range 0 to 254 for manual callouts, or 255 for an automatic callout. In both -cases there follows a two-byte value giving the offset in the pattern to the -start of the following item, and another two-byte item giving the length of the -next item. - - -Changing options ----------------- - -If any of the /i, /m, or /s options are changed within a pattern, an OP_OPT -opcode is compiled, followed by one byte containing the new settings of these -flags. If there are several alternatives, there is an occurrence of OP_OPT at -the start of all those following the first options change, to set appropriate -options for the start of the alternative. Immediately after the end of the -group there is another such item to reset the flags to their previous values. A -change of flag right at the very start of the pattern can be handled entirely -at compile time, and so does not cause anything to be put into the compiled -data. - -Philip Hazel -June 2006 diff --git a/ext/pcre/pcrelib/doc/pcre.txt b/ext/pcre/pcrelib/doc/pcre.txt deleted file mode 100644 index d6c204b574..0000000000 --- a/ext/pcre/pcrelib/doc/pcre.txt +++ /dev/null @@ -1,5153 +0,0 @@ ------------------------------------------------------------------------------ -This file contains a concatenation of the PCRE man pages, converted to plain -text format for ease of searching with a text editor, or for use on systems -that do not have a man page processor. The small individual files that give -synopses of each function in the library have not been included. There are -separate text files for the pcregrep and pcretest commands. ------------------------------------------------------------------------------ - - -PCRE(3) PCRE(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -INTRODUCTION - - The PCRE library is a set of functions that implement regular expres- - sion pattern matching using the same syntax and semantics as Perl, with - just a few differences. The current implementation of PCRE (release - 6.x) corresponds approximately with Perl 5.8, including support for - UTF-8 encoded strings and Unicode general category properties. However, - this support has to be explicitly enabled; it is not the default. - - In addition to the Perl-compatible matching function, PCRE also con- - tains an alternative matching function that matches the same compiled - patterns in a different way. In certain circumstances, the alternative - function has some advantages. For a discussion of the two matching - algorithms, see the pcrematching page. - - PCRE is written in C and released as a C library. A number of people - have written wrappers and interfaces of various kinds. In particular, - Google Inc. have provided a comprehensive C++ wrapper. This is now - included as part of the PCRE distribution. The pcrecpp page has details - of this interface. Other people's contributions can be found in the - Contrib directory at the primary FTP site, which is: - - ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre - - Details of exactly which Perl regular expression features are and are - not supported by PCRE are given in separate documents. See the pcrepat- - tern and pcrecompat pages. - - Some features of PCRE can be included, excluded, or changed when the - library is built. The pcre_config() function makes it possible for a - client to discover which features are available. The features them- - selves are described in the pcrebuild page. Documentation about build- - ing PCRE for various operating systems can be found in the README file - in the source distribution. - - The library contains a number of undocumented internal functions and - data tables that are used by more than one of the exported external - functions, but which are not intended for use by external callers. - Their names all begin with "_pcre_", which hopefully will not provoke - any name clashes. In some environments, it is possible to control which - external symbols are exported when a shared library is built, and in - these cases the undocumented symbols are not exported. - - -USER DOCUMENTATION - - The user documentation for PCRE comprises a number of different sec- - tions. In the "man" format, each of these is a separate "man page". In - the HTML format, each is a separate page, linked from the index page. - In the plain text format, all the sections are concatenated, for ease - of searching. The sections are as follows: - - pcre this document - pcreapi details of PCRE's native C API - pcrebuild options for building PCRE - pcrecallout details of the callout feature - pcrecompat discussion of Perl compatibility - pcrecpp details of the C++ wrapper - pcregrep description of the pcregrep command - pcrematching discussion of the two matching algorithms - pcrepartial details of the partial matching facility - pcrepattern syntax and semantics of supported - regular expressions - pcreperform discussion of performance issues - pcreposix the POSIX-compatible C API - pcreprecompile details of saving and re-using precompiled patterns - pcresample discussion of the sample program - pcrestack discussion of stack usage - pcretest description of the pcretest testing command - - In addition, in the "man" and HTML formats, there is a short page for - each C library function, listing its arguments and results. - - -LIMITATIONS - - There are some size limitations in PCRE but it is hoped that they will - never in practice be relevant. - - The maximum length of a compiled pattern is 65539 (sic) bytes if PCRE - is compiled with the default internal linkage size of 2. If you want to - process regular expressions that are truly enormous, you can compile - PCRE with an internal linkage size of 3 or 4 (see the README file in - the source distribution and the pcrebuild documentation for details). - In these cases the limit is substantially larger. However, the speed - of execution will be slower. - - All values in repeating quantifiers must be less than 65536. The maxi- - mum compiled length of subpattern with an explicit repeat count is - 30000 bytes. The maximum number of capturing subpatterns is 65535. - - There is no limit to the number of non-capturing subpatterns, but the - maximum depth of nesting of all kinds of parenthesized subpattern, - including capturing subpatterns, assertions, and other types of subpat- - tern, is 200. - - The maximum length of name for a named subpattern is 32, and the maxi- - mum number of named subpatterns is 10000. - - The maximum length of a subject string is the largest positive number - that an integer variable can hold. However, when using the traditional - matching function, PCRE uses recursion to handle subpatterns and indef- - inite repetition. This means that the available stack space may limit - the size of a subject string that can be processed by certain patterns. - For a discussion of stack issues, see the pcrestack documentation. - - -UTF-8 AND UNICODE PROPERTY SUPPORT - - From release 3.3, PCRE has had some support for character strings - encoded in the UTF-8 format. For release 4.0 this was greatly extended - to cover most common requirements, and in release 5.0 additional sup- - port for Unicode general category properties was added. - - In order process UTF-8 strings, you must build PCRE to include UTF-8 - support in the code, and, in addition, you must call pcre_compile() - with the PCRE_UTF8 option flag. When you do this, both the pattern and - any subject strings that are matched against it are treated as UTF-8 - strings instead of just strings of bytes. - - If you compile PCRE with UTF-8 support, but do not use it at run time, - the library will be a bit bigger, but the additional run time overhead - is limited to testing the PCRE_UTF8 flag in several places, so should - not be very large. - - If PCRE is built with Unicode character property support (which implies - UTF-8 support), the escape sequences \p{..}, \P{..}, and \X are sup- - ported. The available properties that can be tested are limited to the - general category properties such as Lu for an upper case letter or Nd - for a decimal number, the Unicode script names such as Arabic or Han, - and the derived properties Any and L&. A full list is given in the - pcrepattern documentation. Only the short names for properties are sup- - ported. For example, \p{L} matches a letter. Its Perl synonym, \p{Let- - ter}, is not supported. Furthermore, in Perl, many properties may - optionally be prefixed by "Is", for compatibility with Perl 5.6. PCRE - does not support this. - - The following comments apply when PCRE is running in UTF-8 mode: - - 1. When you set the PCRE_UTF8 flag, the strings passed as patterns and - subjects are checked for validity on entry to the relevant functions. - If an invalid UTF-8 string is passed, an error return is given. In some - situations, you may already know that your strings are valid, and - therefore want to skip these checks in order to improve performance. If - you set the PCRE_NO_UTF8_CHECK flag at compile time or at run time, - PCRE assumes that the pattern or subject it is given (respectively) - contains only valid UTF-8 codes. In this case, it does not diagnose an - invalid UTF-8 string. If you pass an invalid UTF-8 string to PCRE when - PCRE_NO_UTF8_CHECK is set, the results are undefined. Your program may - crash. - - 2. An unbraced hexadecimal escape sequence (such as \xb3) matches a - two-byte UTF-8 character if the value is greater than 127. - - 3. Octal numbers up to \777 are recognized, and match two-byte UTF-8 - characters for values greater than \177. - - 4. Repeat quantifiers apply to complete UTF-8 characters, not to indi- - vidual bytes, for example: \x{100}{3}. - - 5. The dot metacharacter matches one UTF-8 character instead of a sin- - gle byte. - - 6. The escape sequence \C can be used to match a single byte in UTF-8 - mode, but its use can lead to some strange effects. This facility is - not available in the alternative matching function, pcre_dfa_exec(). - - 7. The character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly - test characters of any code value, but the characters that PCRE recog- - nizes as digits, spaces, or word characters remain the same set as - before, all with values less than 256. This remains true even when PCRE - includes Unicode property support, because to do otherwise would slow - down PCRE in many common cases. If you really want to test for a wider - sense of, say, "digit", you must use Unicode property tests such as - \p{Nd}. - - 8. Similarly, characters that match the POSIX named character classes - are all low-valued characters. - - 9. Case-insensitive matching applies only to characters whose values - are less than 128, unless PCRE is built with Unicode property support. - Even when Unicode property support is available, PCRE still uses its - own character tables when checking the case of low-valued characters, - so as not to degrade performance. The Unicode property information is - used only for characters with higher values. Even when Unicode property - support is available, PCRE supports case-insensitive matching only when - there is a one-to-one mapping between a letter's cases. There are a - small number of many-to-one mappings in Unicode; these are not sup- - ported by PCRE. - - -AUTHOR - - Philip Hazel - University Computing Service, - Cambridge CB2 3QG, England. - - Putting an actual email address here seems to have been a spam magnet, - so I've taken it away. If you want to email me, use my initial and sur- - name, separated by a dot, at the domain ucs.cam.ac.uk. - -Last updated: 05 June 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - -PCREBUILD(3) PCREBUILD(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -PCRE BUILD-TIME OPTIONS - - This document describes the optional features of PCRE that can be - selected when the library is compiled. They are all selected, or dese- - lected, by providing options to the configure script that is run before - the make command. The complete list of options for configure (which - includes the standard ones such as the selection of the installation - directory) can be obtained by running - - ./configure --help - - The following sections describe certain options whose names begin with - --enable or --disable. These settings specify changes to the defaults - for the configure command. Because of the way that configure works, - --enable and --disable always come in pairs, so the complementary - option always exists as well, but as it specifies the default, it is - not described. - - -C++ SUPPORT - - By default, the configure script will search for a C++ compiler and C++ - header files. If it finds them, it automatically builds the C++ wrapper - library for PCRE. You can disable this by adding - - --disable-cpp - - to the configure command. - - -UTF-8 SUPPORT - - To build PCRE with support for UTF-8 character strings, add - - --enable-utf8 - - to the configure command. Of itself, this does not make PCRE treat - strings as UTF-8. As well as compiling PCRE with this option, you also - have have to set the PCRE_UTF8 option when you call the pcre_compile() - function. - - -UNICODE CHARACTER PROPERTY SUPPORT - - UTF-8 support allows PCRE to process character values greater than 255 - in the strings that it handles. On its own, however, it does not pro- - vide any facilities for accessing the properties of such characters. If - you want to be able to use the pattern escapes \P, \p, and \X, which - refer to Unicode character properties, you must add - - --enable-unicode-properties - - to the configure command. This implies UTF-8 support, even if you have - not explicitly requested it. - - Including Unicode property support adds around 90K of tables to the - PCRE library, approximately doubling its size. Only the general cate- - gory properties such as Lu and Nd are supported. Details are given in - the pcrepattern documentation. - - -CODE VALUE OF NEWLINE - - By default, PCRE interprets character 10 (linefeed, LF) as indicating - the end of a line. This is the normal newline character on Unix-like - systems. You can compile PCRE to use character 13 (carriage return, CR) - instead, by adding - - --enable-newline-is-cr - - to the configure command. There is also a --enable-newline-is-lf - option, which explicitly specifies linefeed as the newline character. - - Alternatively, you can specify that line endings are to be indicated by - the two character sequence CRLF. If you want this, add - - --enable-newline-is-crlf - - to the configure command. Whatever line ending convention is selected - when PCRE is built can be overridden when the library functions are - called. At build time it is conventional to use the standard for your - operating system. - - -BUILDING SHARED AND STATIC LIBRARIES - - The PCRE building process uses libtool to build both shared and static - Unix libraries by default. You can suppress one of these by adding one - of - - --disable-shared - --disable-static - - to the configure command, as required. - - -POSIX MALLOC USAGE - - When PCRE is called through the POSIX interface (see the pcreposix doc- - umentation), additional working storage is required for holding the - pointers to capturing substrings, because PCRE requires three integers - per substring, whereas the POSIX interface provides only two. If the - number of expected substrings is small, the wrapper function uses space - on the stack, because this is faster than using malloc() for each call. - The default threshold above which the stack is no longer used is 10; it - can be changed by adding a setting such as - - --with-posix-malloc-threshold=20 - - to the configure command. - - -HANDLING VERY LARGE PATTERNS - - Within a compiled pattern, offset values are used to point from one - part to another (for example, from an opening parenthesis to an alter- - nation metacharacter). By default, two-byte values are used for these - offsets, leading to a maximum size for a compiled pattern of around - 64K. This is sufficient to handle all but the most gigantic patterns. - Nevertheless, some people do want to process enormous patterns, so it - is possible to compile PCRE to use three-byte or four-byte offsets by - adding a setting such as - - --with-link-size=3 - - to the configure command. The value given must be 2, 3, or 4. Using - longer offsets slows down the operation of PCRE because it has to load - additional bytes when handling them. - - If you build PCRE with an increased link size, test 2 (and test 5 if - you are using UTF-8) will fail. Part of the output of these tests is a - representation of the compiled pattern, and this changes with the link - size. - - -AVOIDING EXCESSIVE STACK USAGE - - When matching with the pcre_exec() function, PCRE implements backtrack- - ing by making recursive calls to an internal function called match(). - In environments where the size of the stack is limited, this can se- - verely limit PCRE's operation. (The Unix environment does not usually - suffer from this problem, but it may sometimes be necessary to increase - the maximum stack size. There is a discussion in the pcrestack docu- - mentation.) An alternative approach to recursion that uses memory from - the heap to remember data, instead of using recursive function calls, - has been implemented to work round the problem of limited stack size. - If you want to build a version of PCRE that works this way, add - - --disable-stack-for-recursion - - to the configure command. With this configuration, PCRE will use the - pcre_stack_malloc and pcre_stack_free variables to call memory manage- - ment functions. Separate functions are provided because the usage is - very predictable: the block sizes requested are always the same, and - the blocks are always freed in reverse order. A calling program might - be able to implement optimized functions that perform better than the - standard malloc() and free() functions. PCRE runs noticeably more - slowly when built in this way. This option affects only the pcre_exec() - function; it is not relevant for the the pcre_dfa_exec() function. - - -LIMITING PCRE RESOURCE USAGE - - Internally, PCRE has a function called match(), which it calls repeat- - edly (sometimes recursively) when matching a pattern with the - pcre_exec() function. By controlling the maximum number of times this - function may be called during a single matching operation, a limit can - be placed on the resources used by a single call to pcre_exec(). The - limit can be changed at run time, as described in the pcreapi documen- - tation. The default is 10 million, but this can be changed by adding a - setting such as - - --with-match-limit=500000 - - to the configure command. This setting has no effect on the - pcre_dfa_exec() matching function. - - In some environments it is desirable to limit the depth of recursive - calls of match() more strictly than the total number of calls, in order - to restrict the maximum amount of stack (or heap, if --disable-stack- - for-recursion is specified) that is used. A second limit controls this; - it defaults to the value that is set for --with-match-limit, which - imposes no additional constraints. However, you can set a lower limit - by adding, for example, - - --with-match-limit-recursion=10000 - - to the configure command. This value can also be overridden at run - time. - - -USING EBCDIC CODE - - PCRE assumes by default that it will run in an environment where the - character code is ASCII (or Unicode, which is a superset of ASCII). - PCRE can, however, be compiled to run in an EBCDIC environment by - adding - - --enable-ebcdic - - to the configure command. - -Last updated: 06 June 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - -PCREMATCHING(3) PCREMATCHING(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -PCRE MATCHING ALGORITHMS - - This document describes the two different algorithms that are available - in PCRE for matching a compiled regular expression against a given sub- - ject string. The "standard" algorithm is the one provided by the - pcre_exec() function. This works in the same was as Perl's matching - function, and provides a Perl-compatible matching operation. - - An alternative algorithm is provided by the pcre_dfa_exec() function; - this operates in a different way, and is not Perl-compatible. It has - advantages and disadvantages compared with the standard algorithm, and - these are described below. - - When there is only one possible way in which a given subject string can - match a pattern, the two algorithms give the same answer. A difference - arises, however, when there are multiple possibilities. For example, if - the pattern - - ^<.*> - - is matched against the string - - <something> <something else> <something further> - - there are three possible answers. The standard algorithm finds only one - of them, whereas the DFA algorithm finds all three. - - -REGULAR EXPRESSIONS AS TREES - - The set of strings that are matched by a regular expression can be rep- - resented as a tree structure. An unlimited repetition in the pattern - makes the tree of infinite size, but it is still a tree. Matching the - pattern to a given subject string (from a given starting point) can be - thought of as a search of the tree. There are two ways to search a - tree: depth-first and breadth-first, and these correspond to the two - matching algorithms provided by PCRE. - - -THE STANDARD MATCHING ALGORITHM - - In the terminology of Jeffrey Friedl's book Mastering Regular Expres- - sions, the standard algorithm is an "NFA algorithm". It conducts a - depth-first search of the pattern tree. That is, it proceeds along a - single path through the tree, checking that the subject matches what is - required. When there is a mismatch, the algorithm tries any alterna- - tives at the current point, and if they all fail, it backs up to the - previous branch point in the tree, and tries the next alternative - branch at that level. This often involves backing up (moving to the - left) in the subject string as well. The order in which repetition - branches are tried is controlled by the greedy or ungreedy nature of - the quantifier. - - If a leaf node is reached, a matching string has been found, and at - that point the algorithm stops. Thus, if there is more than one possi- - ble match, this algorithm returns the first one that it finds. Whether - this is the shortest, the longest, or some intermediate length depends - on the way the greedy and ungreedy repetition quantifiers are specified - in the pattern. - - Because it ends up with a single path through the tree, it is rela- - tively straightforward for this algorithm to keep track of the sub- - strings that are matched by portions of the pattern in parentheses. - This provides support for capturing parentheses and back references. - - -THE DFA MATCHING ALGORITHM - - DFA stands for "deterministic finite automaton", but you do not need to - understand the origins of that name. This algorithm conducts a breadth- - first search of the tree. Starting from the first matching point in the - subject, it scans the subject string from left to right, once, charac- - ter by character, and as it does this, it remembers all the paths - through the tree that represent valid matches. - - The scan continues until either the end of the subject is reached, or - there are no more unterminated paths. At this point, terminated paths - represent the different matching possibilities (if there are none, the - match has failed). Thus, if there is more than one possible match, - this algorithm finds all of them, and in particular, it finds the long- - est. In PCRE, there is an option to stop the algorithm after the first - match (which is necessarily the shortest) has been found. - - Note that all the matches that are found start at the same point in the - subject. If the pattern - - cat(er(pillar)?) - - is matched against the string "the caterpillar catchment", the result - will be the three strings "cat", "cater", and "caterpillar" that start - at the fourth character of the subject. The algorithm does not automat- - ically move on to find matches that start at later positions. - - There are a number of features of PCRE regular expressions that are not - supported by the DFA matching algorithm. They are as follows: - - 1. Because the algorithm finds all possible matches, the greedy or - ungreedy nature of repetition quantifiers is not relevant. Greedy and - ungreedy quantifiers are treated in exactly the same way. - - 2. When dealing with multiple paths through the tree simultaneously, it - is not straightforward to keep track of captured substrings for the - different matching possibilities, and PCRE's implementation of this - algorithm does not attempt to do this. This means that no captured sub- - strings are available. - - 3. Because no substrings are captured, back references within the pat- - tern are not supported, and cause errors if encountered. - - 4. For the same reason, conditional expressions that use a backrefer- - ence as the condition are not supported. - - 5. Callouts are supported, but the value of the capture_top field is - always 1, and the value of the capture_last field is always -1. - - 6. The \C escape sequence, which (in the standard algorithm) matches a - single byte, even in UTF-8 mode, is not supported because the DFA algo- - rithm moves through the subject string one character at a time, for all - active paths through the tree. - - -ADVANTAGES OF THE DFA ALGORITHM - - Using the DFA matching algorithm provides the following advantages: - - 1. All possible matches (at a single point in the subject) are automat- - ically found, and in particular, the longest match is found. To find - more than one match using the standard algorithm, you have to do kludgy - things with callouts. - - 2. There is much better support for partial matching. The restrictions - on the content of the pattern that apply when using the standard algo- - rithm for partial matching do not apply to the DFA algorithm. For non- - anchored patterns, the starting position of a partial match is avail- - able. - - 3. Because the DFA algorithm scans the subject string just once, and - never needs to backtrack, it is possible to pass very long subject - strings to the matching function in several pieces, checking for par- - tial matching each time. - - -DISADVANTAGES OF THE DFA ALGORITHM - - The DFA algorithm suffers from a number of disadvantages: - - 1. It is substantially slower than the standard algorithm. This is - partly because it has to search for all possible matches, but is also - because it is less susceptible to optimization. - - 2. Capturing parentheses and back references are not supported. - - 3. The "atomic group" feature of PCRE regular expressions is supported, - but does not provide the advantage that it does for the standard algo- - rithm. - -Last updated: 06 June 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - -PCREAPI(3) PCREAPI(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -PCRE NATIVE API - - #include <pcre.h> - - pcre *pcre_compile(const char *pattern, int options, - const char **errptr, int *erroffset, - const unsigned char *tableptr); - - pcre *pcre_compile2(const char *pattern, int options, - int *errorcodeptr, - const char **errptr, int *erroffset, - const unsigned char *tableptr); - - pcre_extra *pcre_study(const pcre *code, int options, - const char **errptr); - - int pcre_exec(const pcre *code, const pcre_extra *extra, - const char *subject, int length, int startoffset, - int options, int *ovector, int ovecsize); - - int pcre_dfa_exec(const pcre *code, const pcre_extra *extra, - const char *subject, int length, int startoffset, - int options, int *ovector, int ovecsize, - int *workspace, int wscount); - - int pcre_copy_named_substring(const pcre *code, - const char *subject, int *ovector, - int stringcount, const char *stringname, - char *buffer, int buffersize); - - int pcre_copy_substring(const char *subject, int *ovector, - int stringcount, int stringnumber, char *buffer, - int buffersize); - - int pcre_get_named_substring(const pcre *code, - const char *subject, int *ovector, - int stringcount, const char *stringname, - const char **stringptr); - - int pcre_get_stringnumber(const pcre *code, - const char *name); - - int pcre_get_stringtable_entries(const pcre *code, - const char *name, char **first, char **last); - - int pcre_get_substring(const char *subject, int *ovector, - int stringcount, int stringnumber, - const char **stringptr); - - int pcre_get_substring_list(const char *subject, - int *ovector, int stringcount, const char ***listptr); - - void pcre_free_substring(const char *stringptr); - - void pcre_free_substring_list(const char **stringptr); - - const unsigned char *pcre_maketables(void); - - int pcre_fullinfo(const pcre *code, const pcre_extra *extra, - int what, void *where); - - int pcre_info(const pcre *code, int *optptr, int *firstcharptr); - - int pcre_refcount(pcre *code, int adjust); - - int pcre_config(int what, void *where); - - char *pcre_version(void); - - void *(*pcre_malloc)(size_t); - - void (*pcre_free)(void *); - - void *(*pcre_stack_malloc)(size_t); - - void (*pcre_stack_free)(void *); - - int (*pcre_callout)(pcre_callout_block *); - - -PCRE API OVERVIEW - - PCRE has its own native API, which is described in this document. There - is also a set of wrapper functions that correspond to the POSIX regular - expression API. These are described in the pcreposix documentation. - Both of these APIs define a set of C function calls. A C++ wrapper is - distributed with PCRE. It is documented in the pcrecpp page. - - The native API C function prototypes are defined in the header file - pcre.h, and on Unix systems the library itself is called libpcre. It - can normally be accessed by adding -lpcre to the command for linking an - application that uses PCRE. The header file defines the macros - PCRE_MAJOR and PCRE_MINOR to contain the major and minor release num- - bers for the library. Applications can use these to include support - for different releases of PCRE. - - The functions pcre_compile(), pcre_compile2(), pcre_study(), and - pcre_exec() are used for compiling and matching regular expressions in - a Perl-compatible manner. A sample program that demonstrates the sim- - plest way of using them is provided in the file called pcredemo.c in - the source distribution. The pcresample documentation describes how to - run it. - - A second matching function, pcre_dfa_exec(), which is not Perl-compati- - ble, is also provided. This uses a different algorithm for the match- - ing. The alternative algorithm finds all possible matches (at a given - point in the subject). However, this algorithm does not return captured - substrings. A description of the two matching algorithms and their - advantages and disadvantages is given in the pcrematching documenta- - tion. - - In addition to the main compiling and matching functions, there are - convenience functions for extracting captured substrings from a subject - string that is matched by pcre_exec(). They are: - - pcre_copy_substring() - pcre_copy_named_substring() - pcre_get_substring() - pcre_get_named_substring() - pcre_get_substring_list() - pcre_get_stringnumber() - pcre_get_stringtable_entries() - - pcre_free_substring() and pcre_free_substring_list() are also provided, - to free the memory used for extracted strings. - - The function pcre_maketables() is used to build a set of character - tables in the current locale for passing to pcre_compile(), - pcre_exec(), or pcre_dfa_exec(). This is an optional facility that is - provided for specialist use. Most commonly, no special tables are - passed, in which case internal tables that are generated when PCRE is - built are used. - - The function pcre_fullinfo() is used to find out information about a - compiled pattern; pcre_info() is an obsolete version that returns only - some of the available information, but is retained for backwards com- - patibility. The function pcre_version() returns a pointer to a string - containing the version of PCRE and its date of release. - - The function pcre_refcount() maintains a reference count in a data - block containing a compiled pattern. This is provided for the benefit - of object-oriented applications. - - The global variables pcre_malloc and pcre_free initially contain the - entry points of the standard malloc() and free() functions, respec- - tively. PCRE calls the memory management functions via these variables, - so a calling program can replace them if it wishes to intercept the - calls. This should be done before calling any PCRE functions. - - The global variables pcre_stack_malloc and pcre_stack_free are also - indirections to memory management functions. These special functions - are used only when PCRE is compiled to use the heap for remembering - data, instead of recursive function calls, when running the pcre_exec() - function. See the pcrebuild documentation for details of how to do - this. It is a non-standard way of building PCRE, for use in environ- - ments that have limited stacks. Because of the greater use of memory - management, it runs more slowly. Separate functions are provided so - that special-purpose external code can be used for this case. When - used, these functions are always called in a stack-like manner (last - obtained, first freed), and always for memory blocks of the same size. - There is a discussion about PCRE's stack usage in the pcrestack docu- - mentation. - - The global variable pcre_callout initially contains NULL. It can be set - by the caller to a "callout" function, which PCRE will then call at - specified points during a matching operation. Details are given in the - pcrecallout documentation. - - -NEWLINES - PCRE supports three different conventions for indicating line breaks in - strings: a single CR character, a single LF character, or the two-char- - acter sequence CRLF. All three are used as "standard" by different - operating systems. When PCRE is built, a default can be specified. The - default default is LF, which is the Unix standard. When PCRE is run, - the default can be overridden, either when a pattern is compiled, or - when it is matched. - - In the PCRE documentation the word "newline" is used to mean "the char- - acter or pair of characters that indicate a line break". - - -MULTITHREADING - - The PCRE functions can be used in multi-threading applications, with - the proviso that the memory management functions pointed to by - pcre_malloc, pcre_free, pcre_stack_malloc, and pcre_stack_free, and the - callout function pointed to by pcre_callout, are shared by all threads. - - The compiled form of a regular expression is not altered during match- - ing, so the same compiled pattern can safely be used by several threads - at once. - - -SAVING PRECOMPILED PATTERNS FOR LATER USE - - The compiled form of a regular expression can be saved and re-used at a - later time, possibly by a different program, and even on a host other - than the one on which it was compiled. Details are given in the - pcreprecompile documentation. - - -CHECKING BUILD-TIME OPTIONS - - int pcre_config(int what, void *where); - - The function pcre_config() makes it possible for a PCRE client to dis- - cover which optional features have been compiled into the PCRE library. - The pcrebuild documentation has more details about these optional fea- - tures. - - The first argument for pcre_config() is an integer, specifying which - information is required; the second argument is a pointer to a variable - into which the information is placed. The following information is - available: - - PCRE_CONFIG_UTF8 - - The output is an integer that is set to one if UTF-8 support is avail- - able; otherwise it is set to zero. - - PCRE_CONFIG_UNICODE_PROPERTIES - - The output is an integer that is set to one if support for Unicode - character properties is available; otherwise it is set to zero. - - PCRE_CONFIG_NEWLINE - - The output is an integer whose value specifies the default character - sequence that is recognized as meaning "newline". The three values that - are supported are: 10 for LF, 13 for CR, and 3338 for CRLF. The default - should normally be the standard sequence for your operating system. - - PCRE_CONFIG_LINK_SIZE - - The output is an integer that contains the number of bytes used for - internal linkage in compiled regular expressions. The value is 2, 3, or - 4. Larger values allow larger regular expressions to be compiled, at - the expense of slower matching. The default value of 2 is sufficient - for all but the most massive patterns, since it allows the compiled - pattern to be up to 64K in size. - - PCRE_CONFIG_POSIX_MALLOC_THRESHOLD - - The output is an integer that contains the threshold above which the - POSIX interface uses malloc() for output vectors. Further details are - given in the pcreposix documentation. - - PCRE_CONFIG_MATCH_LIMIT - - The output is an integer that gives the default limit for the number of - internal matching function calls in a pcre_exec() execution. Further - details are given with pcre_exec() below. - - PCRE_CONFIG_MATCH_LIMIT_RECURSION - - The output is an integer that gives the default limit for the depth of - recursion when calling the internal matching function in a pcre_exec() - execution. Further details are given with pcre_exec() below. - - PCRE_CONFIG_STACKRECURSE - - The output is an integer that is set to one if internal recursion when - running pcre_exec() is implemented by recursive function calls that use - the stack to remember their state. This is the usual way that PCRE is - compiled. The output is zero if PCRE was compiled to use blocks of data - on the heap instead of recursive function calls. In this case, - pcre_stack_malloc and pcre_stack_free are called to manage memory - blocks on the heap, thus avoiding the use of the stack. - - -COMPILING A PATTERN - - pcre *pcre_compile(const char *pattern, int options, - const char **errptr, int *erroffset, - const unsigned char *tableptr); - - pcre *pcre_compile2(const char *pattern, int options, - int *errorcodeptr, - const char **errptr, int *erroffset, - const unsigned char *tableptr); - - Either of the functions pcre_compile() or pcre_compile2() can be called - to compile a pattern into an internal form. The only difference between - the two interfaces is that pcre_compile2() has an additional argument, - errorcodeptr, via which a numerical error code can be returned. - - The pattern is a C string terminated by a binary zero, and is passed in - the pattern argument. A pointer to a single block of memory that is - obtained via pcre_malloc is returned. This contains the compiled code - and related data. The pcre type is defined for the returned block; this - is a typedef for a structure whose contents are not externally defined. - It is up to the caller to free the memory (via pcre_free) when it is no - longer required. - - Although the compiled code of a PCRE regex is relocatable, that is, it - does not depend on memory location, the complete pcre data block is not - fully relocatable, because it may contain a copy of the tableptr argu- - ment, which is an address (see below). - - The options argument contains independent bits that affect the compila- - tion. It should be zero if no options are required. The available - options are described below. Some of them, in particular, those that - are compatible with Perl, can also be set and unset from within the - pattern (see the detailed description in the pcrepattern documenta- - tion). For these options, the contents of the options argument speci- - fies their initial settings at the start of compilation and execution. - The PCRE_ANCHORED and PCRE_NEWLINE_xxx options can be set at the time - of matching as well as at compile time. - - If errptr is NULL, pcre_compile() returns NULL immediately. Otherwise, - if compilation of a pattern fails, pcre_compile() returns NULL, and - sets the variable pointed to by errptr to point to a textual error mes- - sage. This is a static string that is part of the library. You must not - try to free it. The offset from the start of the pattern to the charac- - ter where the error was discovered is placed in the variable pointed to - by erroffset, which must not be NULL. If it is, an immediate error is - given. - - If pcre_compile2() is used instead of pcre_compile(), and the error- - codeptr argument is not NULL, a non-zero error code number is returned - via this argument in the event of an error. This is in addition to the - textual error message. Error codes and messages are listed below. - - If the final argument, tableptr, is NULL, PCRE uses a default set of - character tables that are built when PCRE is compiled, using the - default C locale. Otherwise, tableptr must be an address that is the - result of a call to pcre_maketables(). This value is stored with the - compiled pattern, and used again by pcre_exec(), unless another table - pointer is passed to it. For more discussion, see the section on locale - support below. - - This code fragment shows a typical straightforward call to pcre_com- - pile(): - - pcre *re; - const char *error; - int erroffset; - re = pcre_compile( - "^A.*Z", /* the pattern */ - 0, /* default options */ - &error, /* for error message */ - &erroffset, /* for error offset */ - NULL); /* use default character tables */ - - The following names for option bits are defined in the pcre.h header - file: - - PCRE_ANCHORED - - If this bit is set, the pattern is forced to be "anchored", that is, it - is constrained to match only at the first matching point in the string - that is being searched (the "subject string"). This effect can also be - achieved by appropriate constructs in the pattern itself, which is the - only way to do it in Perl. - - PCRE_AUTO_CALLOUT - - If this bit is set, pcre_compile() automatically inserts callout items, - all with number 255, before each pattern item. For discussion of the - callout facility, see the pcrecallout documentation. - - PCRE_CASELESS - - If this bit is set, letters in the pattern match both upper and lower - case letters. It is equivalent to Perl's /i option, and it can be - changed within a pattern by a (?i) option setting. In UTF-8 mode, PCRE - always understands the concept of case for characters whose values are - less than 128, so caseless matching is always possible. For characters - with higher values, the concept of case is supported if PCRE is com- - piled with Unicode property support, but not otherwise. If you want to - use caseless matching for characters 128 and above, you must ensure - that PCRE is compiled with Unicode property support as well as with - UTF-8 support. - - PCRE_DOLLAR_ENDONLY - - If this bit is set, a dollar metacharacter in the pattern matches only - at the end of the subject string. Without this option, a dollar also - matches immediately before a newline at the end of the string (but not - before any other newlines). The PCRE_DOLLAR_ENDONLY option is ignored - if PCRE_MULTILINE is set. There is no equivalent to this option in - Perl, and no way to set it within a pattern. - - PCRE_DOTALL - - If this bit is set, a dot metacharater in the pattern matches all char- - acters, including those that indicate newline. Without it, a dot does - not match when the current position is at a newline. This option is - equivalent to Perl's /s option, and it can be changed within a pattern - by a (?s) option setting. A negative class such as [^a] always matches - newlines, independent of the setting of this option. - - PCRE_DUPNAMES - - If this bit is set, names used to identify capturing subpatterns need - not be unique. This can be helpful for certain types of pattern when it - is known that only one instance of the named subpattern can ever be - matched. There are more details of named subpatterns below; see also - the pcrepattern documentation. - - PCRE_EXTENDED - - If this bit is set, whitespace data characters in the pattern are - totally ignored except when escaped or inside a character class. White- - space does not include the VT character (code 11). In addition, charac- - ters between an unescaped # outside a character class and the next new- - line, inclusive, are also ignored. This is equivalent to Perl's /x - option, and it can be changed within a pattern by a (?x) option set- - ting. - - This option makes it possible to include comments inside complicated - patterns. Note, however, that this applies only to data characters. - Whitespace characters may never appear within special character - sequences in a pattern, for example within the sequence (?( which - introduces a conditional subpattern. - - PCRE_EXTRA - - This option was invented in order to turn on additional functionality - of PCRE that is incompatible with Perl, but it is currently of very - little use. When set, any backslash in a pattern that is followed by a - letter that has no special meaning causes an error, thus reserving - these combinations for future expansion. By default, as in Perl, a - backslash followed by a letter with no special meaning is treated as a - literal. (Perl can, however, be persuaded to give a warning for this.) - There are at present no other features controlled by this option. It - can also be set by a (?X) option setting within a pattern. - - PCRE_FIRSTLINE - - If this option is set, an unanchored pattern is required to match - before or at the first newline in the subject string, though the - matched text may continue over the newline. - - PCRE_MULTILINE - - By default, PCRE treats the subject string as consisting of a single - line of characters (even if it actually contains newlines). The "start - of line" metacharacter (^) matches only at the start of the string, - while the "end of line" metacharacter ($) matches only at the end of - the string, or before a terminating newline (unless PCRE_DOLLAR_ENDONLY - is set). This is the same as Perl. - - When PCRE_MULTILINE it is set, the "start of line" and "end of line" - constructs match immediately following or immediately before internal - newlines in the subject string, respectively, as well as at the very - start and end. This is equivalent to Perl's /m option, and it can be - changed within a pattern by a (?m) option setting. If there are no new- - lines in a subject string, or no occurrences of ^ or $ in a pattern, - setting PCRE_MULTILINE has no effect. - - PCRE_NEWLINE_CR - PCRE_NEWLINE_LF - PCRE_NEWLINE_CRLF - - These options override the default newline definition that was chosen - when PCRE was built. Setting the first or the second specifies that a - newline is indicated by a single character (CR or LF, respectively). - Setting both of them specifies that a newline is indicated by the two- - character CRLF sequence. For convenience, PCRE_NEWLINE_CRLF is defined - to contain both bits. The only time that a line break is relevant when - compiling a pattern is if PCRE_EXTENDED is set, and an unescaped # out- - side a character class is encountered. This indicates a comment that - lasts until after the next newline. - - The newline option set at compile time becomes the default that is used - for pcre_exec() and pcre_dfa_exec(), but it can be overridden. - - PCRE_NO_AUTO_CAPTURE - - If this option is set, it disables the use of numbered capturing paren- - theses in the pattern. Any opening parenthesis that is not followed by - ? behaves as if it were followed by ?: but named parentheses can still - be used for capturing (and they acquire numbers in the usual way). - There is no equivalent of this option in Perl. - - PCRE_UNGREEDY - - This option inverts the "greediness" of the quantifiers so that they - are not greedy by default, but become greedy if followed by "?". It is - not compatible with Perl. It can also be set by a (?U) option setting - within the pattern. - - PCRE_UTF8 - - This option causes PCRE to regard both the pattern and the subject as - strings of UTF-8 characters instead of single-byte character strings. - However, it is available only when PCRE is built to include UTF-8 sup- - port. If not, the use of this option provokes an error. Details of how - this option changes the behaviour of PCRE are given in the section on - UTF-8 support in the main pcre page. - - PCRE_NO_UTF8_CHECK - - When PCRE_UTF8 is set, the validity of the pattern as a UTF-8 string is - automatically checked. If an invalid UTF-8 sequence of bytes is found, - pcre_compile() returns an error. If you already know that your pattern - is valid, and you want to skip this check for performance reasons, you - can set the PCRE_NO_UTF8_CHECK option. When it is set, the effect of - passing an invalid UTF-8 string as a pattern is undefined. It may cause - your program to crash. Note that this option can also be passed to - pcre_exec() and pcre_dfa_exec(), to suppress the UTF-8 validity check- - ing of subject strings. - - -COMPILATION ERROR CODES - - The following table lists the error codes than may be returned by - pcre_compile2(), along with the error messages that may be returned by - both compiling functions. - - 0 no error - 1 \ at end of pattern - 2 \c at end of pattern - 3 unrecognized character follows \ - 4 numbers out of order in {} quantifier - 5 number too big in {} quantifier - 6 missing terminating ] for character class - 7 invalid escape sequence in character class - 8 range out of order in character class - 9 nothing to repeat - 10 operand of unlimited repeat could match the empty string - 11 internal error: unexpected repeat - 12 unrecognized character after (? - 13 POSIX named classes are supported only within a class - 14 missing ) - 15 reference to non-existent subpattern - 16 erroffset passed as NULL - 17 unknown option bit(s) set - 18 missing ) after comment - 19 parentheses nested too deeply - 20 regular expression too large - 21 failed to get memory - 22 unmatched parentheses - 23 internal error: code overflow - 24 unrecognized character after (?< - 25 lookbehind assertion is not fixed length - 26 malformed number or name after (?( - 27 conditional group contains more than two branches - 28 assertion expected after (?( - 29 (?R or (?digits must be followed by ) - 30 unknown POSIX class name - 31 POSIX collating elements are not supported - 32 this version of PCRE is not compiled with PCRE_UTF8 support - 33 spare error - 34 character value in \x{...} sequence is too large - 35 invalid condition (?(0) - 36 \C not allowed in lookbehind assertion - 37 PCRE does not support \L, \l, \N, \U, or \u - 38 number after (?C is > 255 - 39 closing ) for (?C expected - 40 recursive call could loop indefinitely - 41 unrecognized character after (?P - 42 syntax error after (?P - 43 two named subpatterns have the same name - 44 invalid UTF-8 string - 45 support for \P, \p, and \X has not been compiled - 46 malformed \P or \p sequence - 47 unknown property name after \P or \p - 48 subpattern name is too long (maximum 32 characters) - 49 too many named subpatterns (maximum 10,000) - 50 repeated subpattern is too long - 51 octal value is greater than \377 (not in UTF-8 mode) - - -STUDYING A PATTERN - - pcre_extra *pcre_study(const pcre *code, int options - const char **errptr); - - If a compiled pattern is going to be used several times, it is worth - spending more time analyzing it in order to speed up the time taken for - matching. The function pcre_study() takes a pointer to a compiled pat- - tern as its first argument. If studying the pattern produces additional - information that will help speed up matching, pcre_study() returns a - pointer to a pcre_extra block, in which the study_data field points to - the results of the study. - - The returned value from pcre_study() can be passed directly to - pcre_exec(). However, a pcre_extra block also contains other fields - that can be set by the caller before the block is passed; these are - described below in the section on matching a pattern. - - If studying the pattern does not produce any additional information - pcre_study() returns NULL. In that circumstance, if the calling program - wants to pass any of the other fields to pcre_exec(), it must set up - its own pcre_extra block. - - The second argument of pcre_study() contains option bits. At present, - no options are defined, and this argument should always be zero. - - The third argument for pcre_study() is a pointer for an error message. - If studying succeeds (even if no data is returned), the variable it - points to is set to NULL. Otherwise it is set to point to a textual - error message. This is a static string that is part of the library. You - must not try to free it. You should test the error pointer for NULL - after calling pcre_study(), to be sure that it has run successfully. - - This is a typical call to pcre_study(): - - pcre_extra *pe; - pe = pcre_study( - re, /* result of pcre_compile() */ - 0, /* no options exist */ - &error); /* set to NULL or points to a message */ - - At present, studying a pattern is useful only for non-anchored patterns - that do not have a single fixed starting character. A bitmap of possi- - ble starting bytes is created. - - -LOCALE SUPPORT - - PCRE handles caseless matching, and determines whether characters are - letters digits, or whatever, by reference to a set of tables, indexed - by character value. When running in UTF-8 mode, this applies only to - characters with codes less than 128. Higher-valued codes never match - escapes such as \w or \d, but can be tested with \p if PCRE is built - with Unicode character property support. The use of locales with Uni- - code is discouraged. - - An internal set of tables is created in the default C locale when PCRE - is built. This is used when the final argument of pcre_compile() is - NULL, and is sufficient for many applications. An alternative set of - tables can, however, be supplied. These may be created in a different - locale from the default. As more and more applications change to using - Unicode, the need for this locale support is expected to die away. - - External tables are built by calling the pcre_maketables() function, - which has no arguments, in the relevant locale. The result can then be - passed to pcre_compile() or pcre_exec() as often as necessary. For - example, to build and use tables that are appropriate for the French - locale (where accented characters with values greater than 128 are - treated as letters), the following code could be used: - - setlocale(LC_CTYPE, "fr_FR"); - tables = pcre_maketables(); - re = pcre_compile(..., tables); - - When pcre_maketables() runs, the tables are built in memory that is - obtained via pcre_malloc. It is the caller's responsibility to ensure - that the memory containing the tables remains available for as long as - it is needed. - - The pointer that is passed to pcre_compile() is saved with the compiled - pattern, and the same tables are used via this pointer by pcre_study() - and normally also by pcre_exec(). Thus, by default, for any single pat- - tern, compilation, studying and matching all happen in the same locale, - but different patterns can be compiled in different locales. - - It is possible to pass a table pointer or NULL (indicating the use of - the internal tables) to pcre_exec(). Although not intended for this - purpose, this facility could be used to match a pattern in a different - locale from the one in which it was compiled. Passing table pointers at - run time is discussed below in the section on matching a pattern. - - -INFORMATION ABOUT A PATTERN - - int pcre_fullinfo(const pcre *code, const pcre_extra *extra, - int what, void *where); - - The pcre_fullinfo() function returns information about a compiled pat- - tern. It replaces the obsolete pcre_info() function, which is neverthe- - less retained for backwards compability (and is documented below). - - The first argument for pcre_fullinfo() is a pointer to the compiled - pattern. The second argument is the result of pcre_study(), or NULL if - the pattern was not studied. The third argument specifies which piece - of information is required, and the fourth argument is a pointer to a - variable to receive the data. The yield of the function is zero for - success, or one of the following negative numbers: - - PCRE_ERROR_NULL the argument code was NULL - the argument where was NULL - PCRE_ERROR_BADMAGIC the "magic number" was not found - PCRE_ERROR_BADOPTION the value of what was invalid - - The "magic number" is placed at the start of each compiled pattern as - an simple check against passing an arbitrary memory pointer. Here is a - typical call of pcre_fullinfo(), to obtain the length of the compiled - pattern: - - int rc; - size_t length; - rc = pcre_fullinfo( - re, /* result of pcre_compile() */ - pe, /* result of pcre_study(), or NULL */ - PCRE_INFO_SIZE, /* what is required */ - &length); /* where to put the data */ - - The possible values for the third argument are defined in pcre.h, and - are as follows: - - PCRE_INFO_BACKREFMAX - - Return the number of the highest back reference in the pattern. The - fourth argument should point to an int variable. Zero is returned if - there are no back references. - - PCRE_INFO_CAPTURECOUNT - - Return the number of capturing subpatterns in the pattern. The fourth - argument should point to an int variable. - - PCRE_INFO_DEFAULT_TABLES - - Return a pointer to the internal default character tables within PCRE. - The fourth argument should point to an unsigned char * variable. This - information call is provided for internal use by the pcre_study() func- - tion. External callers can cause PCRE to use its internal tables by - passing a NULL table pointer. - - PCRE_INFO_FIRSTBYTE - - Return information about the first byte of any matched string, for a - non-anchored pattern. The fourth argument should point to an int vari- - able. (This option used to be called PCRE_INFO_FIRSTCHAR; the old name - is still recognized for backwards compatibility.) - - If there is a fixed first byte, for example, from a pattern such as - (cat|cow|coyote). Otherwise, if either - - (a) the pattern was compiled with the PCRE_MULTILINE option, and every - branch starts with "^", or - - (b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not - set (if it were set, the pattern would be anchored), - - -1 is returned, indicating that the pattern matches only at the start - of a subject string or after any newline within the string. Otherwise - -2 is returned. For anchored patterns, -2 is returned. - - PCRE_INFO_FIRSTTABLE - - If the pattern was studied, and this resulted in the construction of a - 256-bit table indicating a fixed set of bytes for the first byte in any - matching string, a pointer to the table is returned. Otherwise NULL is - returned. The fourth argument should point to an unsigned char * vari- - able. - - PCRE_INFO_LASTLITERAL - - Return the value of the rightmost literal byte that must exist in any - matched string, other than at its start, if such a byte has been - recorded. The fourth argument should point to an int variable. If there - is no such byte, -1 is returned. For anchored patterns, a last literal - byte is recorded only if it follows something of variable length. For - example, for the pattern /^a\d+z\d+/ the returned value is "z", but for - /^a\dz\d/ the returned value is -1. - - PCRE_INFO_NAMECOUNT - PCRE_INFO_NAMEENTRYSIZE - PCRE_INFO_NAMETABLE - - PCRE supports the use of named as well as numbered capturing parenthe- - ses. The names are just an additional way of identifying the parenthe- - ses, which still acquire numbers. Several convenience functions such as - pcre_get_named_substring() are provided for extracting captured sub- - strings by name. It is also possible to extract the data directly, by - first converting the name to a number in order to access the correct - pointers in the output vector (described with pcre_exec() below). To do - the conversion, you need to use the name-to-number map, which is - described by these three values. - - The map consists of a number of fixed-size entries. PCRE_INFO_NAMECOUNT - gives the number of entries, and PCRE_INFO_NAMEENTRYSIZE gives the size - of each entry; both of these return an int value. The entry size - depends on the length of the longest name. PCRE_INFO_NAMETABLE returns - a pointer to the first entry of the table (a pointer to char). The - first two bytes of each entry are the number of the capturing parenthe- - sis, most significant byte first. The rest of the entry is the corre- - sponding name, zero terminated. The names are in alphabetical order. - When PCRE_DUPNAMES is set, duplicate names are in order of their paren- - theses numbers. For example, consider the following pattern (assume - PCRE_EXTENDED is set, so white space - including newlines - is - ignored): - - (?P<date> (?P<year>(\d\d)?\d\d) - - (?P<month>\d\d) - (?P<day>\d\d) ) - - There are four named subpatterns, so the table has four entries, and - each entry in the table is eight bytes long. The table is as follows, - with non-printing bytes shows in hexadecimal, and undefined bytes shown - as ??: - - 00 01 d a t e 00 ?? - 00 05 d a y 00 ?? ?? - 00 04 m o n t h 00 - 00 02 y e a r 00 ?? - - When writing code to extract data from named subpatterns using the - name-to-number map, remember that the length of the entries is likely - to be different for each compiled pattern. - - PCRE_INFO_OPTIONS - - Return a copy of the options with which the pattern was compiled. The - fourth argument should point to an unsigned long int variable. These - option bits are those specified in the call to pcre_compile(), modified - by any top-level option settings within the pattern itself. - - A pattern is automatically anchored by PCRE if all of its top-level - alternatives begin with one of the following: - - ^ unless PCRE_MULTILINE is set - \A always - \G always - .* if PCRE_DOTALL is set and there are no back - references to the subpattern in which .* appears - - For such patterns, the PCRE_ANCHORED bit is set in the options returned - by pcre_fullinfo(). - - PCRE_INFO_SIZE - - Return the size of the compiled pattern, that is, the value that was - passed as the argument to pcre_malloc() when PCRE was getting memory in - which to place the compiled data. The fourth argument should point to a - size_t variable. - - PCRE_INFO_STUDYSIZE - - Return the size of the data block pointed to by the study_data field in - a pcre_extra block. That is, it is the value that was passed to - pcre_malloc() when PCRE was getting memory into which to place the data - created by pcre_study(). The fourth argument should point to a size_t - variable. - - -OBSOLETE INFO FUNCTION - - int pcre_info(const pcre *code, int *optptr, int *firstcharptr); - - The pcre_info() function is now obsolete because its interface is too - restrictive to return all the available data about a compiled pattern. - New programs should use pcre_fullinfo() instead. The yield of - pcre_info() is the number of capturing subpatterns, or one of the fol- - lowing negative numbers: - - PCRE_ERROR_NULL the argument code was NULL - PCRE_ERROR_BADMAGIC the "magic number" was not found - - If the optptr argument is not NULL, a copy of the options with which - the pattern was compiled is placed in the integer it points to (see - PCRE_INFO_OPTIONS above). - - If the pattern is not anchored and the firstcharptr argument is not - NULL, it is used to pass back information about the first character of - any matched string (see PCRE_INFO_FIRSTBYTE above). - - -REFERENCE COUNTS - - int pcre_refcount(pcre *code, int adjust); - - The pcre_refcount() function is used to maintain a reference count in - the data block that contains a compiled pattern. It is provided for the - benefit of applications that operate in an object-oriented manner, - where different parts of the application may be using the same compiled - pattern, but you want to free the block when they are all done. - - When a pattern is compiled, the reference count field is initialized to - zero. It is changed only by calling this function, whose action is to - add the adjust value (which may be positive or negative) to it. The - yield of the function is the new value. However, the value of the count - is constrained to lie between 0 and 65535, inclusive. If the new value - is outside these limits, it is forced to the appropriate limit value. - - Except when it is zero, the reference count is not correctly preserved - if a pattern is compiled on one host and then transferred to a host - whose byte-order is different. (This seems a highly unlikely scenario.) - - -MATCHING A PATTERN: THE TRADITIONAL FUNCTION - - int pcre_exec(const pcre *code, const pcre_extra *extra, - const char *subject, int length, int startoffset, - int options, int *ovector, int ovecsize); - - The function pcre_exec() is called to match a subject string against a - compiled pattern, which is passed in the code argument. If the pattern - has been studied, the result of the study should be passed in the extra - argument. This function is the main matching facility of the library, - and it operates in a Perl-like manner. For specialist use there is also - an alternative matching function, which is described below in the sec- - tion about the pcre_dfa_exec() function. - - In most applications, the pattern will have been compiled (and option- - ally studied) in the same process that calls pcre_exec(). However, it - is possible to save compiled patterns and study data, and then use them - later in different processes, possibly even on different hosts. For a - discussion about this, see the pcreprecompile documentation. - - Here is an example of a simple call to pcre_exec(): - - int rc; - int ovector[30]; - rc = pcre_exec( - re, /* result of pcre_compile() */ - NULL, /* we didn't study the pattern */ - "some string", /* the subject string */ - 11, /* the length of the subject string */ - 0, /* start at offset 0 in the subject */ - 0, /* default options */ - ovector, /* vector of integers for substring information */ - 30); /* number of elements (NOT size in bytes) */ - - Extra data for pcre_exec() - - If the extra argument is not NULL, it must point to a pcre_extra data - block. The pcre_study() function returns such a block (when it doesn't - return NULL), but you can also create one for yourself, and pass addi- - tional information in it. The pcre_extra block contains the following - fields (not necessarily in this order): - - unsigned long int flags; - void *study_data; - unsigned long int match_limit; - unsigned long int match_limit_recursion; - void *callout_data; - const unsigned char *tables; - - The flags field is a bitmap that specifies which of the other fields - are set. The flag bits are: - - PCRE_EXTRA_STUDY_DATA - PCRE_EXTRA_MATCH_LIMIT - PCRE_EXTRA_MATCH_LIMIT_RECURSION - PCRE_EXTRA_CALLOUT_DATA - PCRE_EXTRA_TABLES - - Other flag bits should be set to zero. The study_data field is set in - the pcre_extra block that is returned by pcre_study(), together with - the appropriate flag bit. You should not set this yourself, but you may - add to the block by setting the other fields and their corresponding - flag bits. - - The match_limit field provides a means of preventing PCRE from using up - a vast amount of resources when running patterns that are not going to - match, but which have a very large number of possibilities in their - search trees. The classic example is the use of nested unlimited - repeats. - - Internally, PCRE uses a function called match() which it calls repeat- - edly (sometimes recursively). The limit set by match_limit is imposed - on the number of times this function is called during a match, which - has the effect of limiting the amount of backtracking that can take - place. For patterns that are not anchored, the count restarts from zero - for each position in the subject string. - - The default value for the limit can be set when PCRE is built; the - default default is 10 million, which handles all but the most extreme - cases. You can override the default by suppling pcre_exec() with a - pcre_extra block in which match_limit is set, and - PCRE_EXTRA_MATCH_LIMIT is set in the flags field. If the limit is - exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT. - - The match_limit_recursion field is similar to match_limit, but instead - of limiting the total number of times that match() is called, it limits - the depth of recursion. The recursion depth is a smaller number than - the total number of calls, because not all calls to match() are recur- - sive. This limit is of use only if it is set smaller than match_limit. - - Limiting the recursion depth limits the amount of stack that can be - used, or, when PCRE has been compiled to use memory on the heap instead - of the stack, the amount of heap memory that can be used. - - The default value for match_limit_recursion can be set when PCRE is - built; the default default is the same value as the default for - match_limit. You can override the default by suppling pcre_exec() with - a pcre_extra block in which match_limit_recursion is set, and - PCRE_EXTRA_MATCH_LIMIT_RECURSION is set in the flags field. If the - limit is exceeded, pcre_exec() returns PCRE_ERROR_RECURSIONLIMIT. - - The pcre_callout field is used in conjunction with the "callout" fea- - ture, which is described in the pcrecallout documentation. - - The tables field is used to pass a character tables pointer to - pcre_exec(); this overrides the value that is stored with the compiled - pattern. A non-NULL value is stored with the compiled pattern only if - custom tables were supplied to pcre_compile() via its tableptr argu- - ment. If NULL is passed to pcre_exec() using this mechanism, it forces - PCRE's internal tables to be used. This facility is helpful when re- - using patterns that have been saved after compiling with an external - set of tables, because the external tables might be at a different - address when pcre_exec() is called. See the pcreprecompile documenta- - tion for a discussion of saving compiled patterns for later use. - - Option bits for pcre_exec() - - The unused bits of the options argument for pcre_exec() must be zero. - The only bits that may be set are PCRE_ANCHORED, PCRE_NEWLINE_xxx, - PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, PCRE_NO_UTF8_CHECK and - PCRE_PARTIAL. - - PCRE_ANCHORED - - The PCRE_ANCHORED option limits pcre_exec() to matching at the first - matching position. If a pattern was compiled with PCRE_ANCHORED, or - turned out to be anchored by virtue of its contents, it cannot be made - unachored at matching time. - - PCRE_NEWLINE_CR - PCRE_NEWLINE_LF - PCRE_NEWLINE_CRLF - - These options override the newline definition that was chosen or - defaulted when the pattern was compiled. For details, see the descrip- - tion pcre_compile() above. During matching, the newline choice affects - the behaviour of the dot, circumflex, and dollar metacharacters. - - PCRE_NOTBOL - - This option specifies that first character of the subject string is not - the beginning of a line, so the circumflex metacharacter should not - match before it. Setting this without PCRE_MULTILINE (at compile time) - causes circumflex never to match. This option affects only the behav- - iour of the circumflex metacharacter. It does not affect \A. - - PCRE_NOTEOL - - This option specifies that the end of the subject string is not the end - of a line, so the dollar metacharacter should not match it nor (except - in multiline mode) a newline immediately before it. Setting this with- - out PCRE_MULTILINE (at compile time) causes dollar never to match. This - option affects only the behaviour of the dollar metacharacter. It does - not affect \Z or \z. - - PCRE_NOTEMPTY - - An empty string is not considered to be a valid match if this option is - set. If there are alternatives in the pattern, they are tried. If all - the alternatives match the empty string, the entire match fails. For - example, if the pattern - - a?b? - - is applied to a string not beginning with "a" or "b", it matches the - empty string at the start of the subject. With PCRE_NOTEMPTY set, this - match is not valid, so PCRE searches further into the string for occur- - rences of "a" or "b". - - Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a spe- - cial case of a pattern match of the empty string within its split() - function, and when using the /g modifier. It is possible to emulate - Perl's behaviour after matching a null string by first trying the match - again at the same offset with PCRE_NOTEMPTY and PCRE_ANCHORED, and then - if that fails by advancing the starting offset (see below) and trying - an ordinary match again. There is some code that demonstrates how to do - this in the pcredemo.c sample program. - - PCRE_NO_UTF8_CHECK - - When PCRE_UTF8 is set at compile time, the validity of the subject as a - UTF-8 string is automatically checked when pcre_exec() is subsequently - called. The value of startoffset is also checked to ensure that it - points to the start of a UTF-8 character. If an invalid UTF-8 sequence - of bytes is found, pcre_exec() returns the error PCRE_ERROR_BADUTF8. If - startoffset contains an invalid value, PCRE_ERROR_BADUTF8_OFFSET is - returned. - - If you already know that your subject is valid, and you want to skip - these checks for performance reasons, you can set the - PCRE_NO_UTF8_CHECK option when calling pcre_exec(). You might want to - do this for the second and subsequent calls to pcre_exec() if you are - making repeated calls to find all the matches in a single subject - string. However, you should be sure that the value of startoffset - points to the start of a UTF-8 character. When PCRE_NO_UTF8_CHECK is - set, the effect of passing an invalid UTF-8 string as a subject, or a - value of startoffset that does not point to the start of a UTF-8 char- - acter, is undefined. Your program may crash. - - PCRE_PARTIAL - - This option turns on the partial matching feature. If the subject - string fails to match the pattern, but at some point during the match- - ing process the end of the subject was reached (that is, the subject - partially matches the pattern and the failure to match occurred only - because there were not enough subject characters), pcre_exec() returns - PCRE_ERROR_PARTIAL instead of PCRE_ERROR_NOMATCH. When PCRE_PARTIAL is - used, there are restrictions on what may appear in the pattern. These - are discussed in the pcrepartial documentation. - - The string to be matched by pcre_exec() - - The subject string is passed to pcre_exec() as a pointer in subject, a - length in length, and a starting byte offset in startoffset. In UTF-8 - mode, the byte offset must point to the start of a UTF-8 character. - Unlike the pattern string, the subject may contain binary zero bytes. - When the starting offset is zero, the search for a match starts at the - beginning of the subject, and this is by far the most common case. - - A non-zero starting offset is useful when searching for another match - in the same subject by calling pcre_exec() again after a previous suc- - cess. Setting startoffset differs from just passing over a shortened - string and setting PCRE_NOTBOL in the case of a pattern that begins - with any kind of lookbehind. For example, consider the pattern - - \Biss\B - - which finds occurrences of "iss" in the middle of words. (\B matches - only if the current position in the subject is not a word boundary.) - When applied to the string "Mississipi" the first call to pcre_exec() - finds the first occurrence. If pcre_exec() is called again with just - the remainder of the subject, namely "issipi", it does not match, - because \B is always false at the start of the subject, which is deemed - to be a word boundary. However, if pcre_exec() is passed the entire - string again, but with startoffset set to 4, it finds the second occur- - rence of "iss" because it is able to look behind the starting point to - discover that it is preceded by a letter. - - If a non-zero starting offset is passed when the pattern is anchored, - one attempt to match at the given offset is made. This can only succeed - if the pattern does not require the match to be at the start of the - subject. - - How pcre_exec() returns captured substrings - - In general, a pattern matches a certain portion of the subject, and in - addition, further substrings from the subject may be picked out by - parts of the pattern. Following the usage in Jeffrey Friedl's book, - this is called "capturing" in what follows, and the phrase "capturing - subpattern" is used for a fragment of a pattern that picks out a sub- - string. PCRE supports several other kinds of parenthesized subpattern - that do not cause substrings to be captured. - - Captured substrings are returned to the caller via a vector of integer - offsets whose address is passed in ovector. The number of elements in - the vector is passed in ovecsize, which must be a non-negative number. - Note: this argument is NOT the size of ovector in bytes. - - The first two-thirds of the vector is used to pass back captured sub- - strings, each substring using a pair of integers. The remaining third - of the vector is used as workspace by pcre_exec() while matching cap- - turing subpatterns, and is not available for passing back information. - The length passed in ovecsize should always be a multiple of three. If - it is not, it is rounded down. - - When a match is successful, information about captured substrings is - returned in pairs of integers, starting at the beginning of ovector, - and continuing up to two-thirds of its length at the most. The first - element of a pair is set to the offset of the first character in a sub- - string, and the second is set to the offset of the first character - after the end of a substring. The first pair, ovector[0] and ovec- - tor[1], identify the portion of the subject string matched by the - entire pattern. The next pair is used for the first capturing subpat- - tern, and so on. The value returned by pcre_exec() is one more than the - highest numbered pair that has been set. For example, if two substrings - have been captured, the returned value is 3. If there are no capturing - subpatterns, the return value from a successful match is 1, indicating - that just the first pair of offsets has been set. - - If a capturing subpattern is matched repeatedly, it is the last portion - of the string that it matched that is returned. - - If the vector is too small to hold all the captured substring offsets, - it is used as far as possible (up to two-thirds of its length), and the - function returns a value of zero. In particular, if the substring off- - sets are not of interest, pcre_exec() may be called with ovector passed - as NULL and ovecsize as zero. However, if the pattern contains back - references and the ovector is not big enough to remember the related - substrings, PCRE has to get additional memory for use during matching. - Thus it is usually advisable to supply an ovector. - - The pcre_info() function can be used to find out how many capturing - subpatterns there are in a compiled pattern. The smallest size for - ovector that will allow for n captured substrings, in addition to the - offsets of the substring matched by the whole pattern, is (n+1)*3. - - It is possible for capturing subpattern number n+1 to match some part - of the subject when subpattern n has not been used at all. For example, - if the string "abc" is matched against the pattern (a|(z))(bc) the - return from the function is 4, and subpatterns 1 and 3 are matched, but - 2 is not. When this happens, both values in the offset pairs corre- - sponding to unused subpatterns are set to -1. - - Offset values that correspond to unused subpatterns at the end of the - expression are also set to -1. For example, if the string "abc" is - matched against the pattern (abc)(x(yz)?)? subpatterns 2 and 3 are not - matched. The return from the function is 2, because the highest used - capturing subpattern number is 1. However, you can refer to the offsets - for the second and third capturing subpatterns if you wish (assuming - the vector is large enough, of course). - - Some convenience functions are provided for extracting the captured - substrings as separate strings. These are described below. - - Error return values from pcre_exec() - - If pcre_exec() fails, it returns a negative number. The following are - defined in the header file: - - PCRE_ERROR_NOMATCH (-1) - - The subject string did not match the pattern. - - PCRE_ERROR_NULL (-2) - - Either code or subject was passed as NULL, or ovector was NULL and - ovecsize was not zero. - - PCRE_ERROR_BADOPTION (-3) - - An unrecognized bit was set in the options argument. - - PCRE_ERROR_BADMAGIC (-4) - - PCRE stores a 4-byte "magic number" at the start of the compiled code, - to catch the case when it is passed a junk pointer and to detect when a - pattern that was compiled in an environment of one endianness is run in - an environment with the other endianness. This is the error that PCRE - gives when the magic number is not present. - - PCRE_ERROR_UNKNOWN_NODE (-5) - - While running the pattern match, an unknown item was encountered in the - compiled pattern. This error could be caused by a bug in PCRE or by - overwriting of the compiled pattern. - - PCRE_ERROR_NOMEMORY (-6) - - If a pattern contains back references, but the ovector that is passed - to pcre_exec() is not big enough to remember the referenced substrings, - PCRE gets a block of memory at the start of matching to use for this - purpose. If the call via pcre_malloc() fails, this error is given. The - memory is automatically freed at the end of matching. - - PCRE_ERROR_NOSUBSTRING (-7) - - This error is used by the pcre_copy_substring(), pcre_get_substring(), - and pcre_get_substring_list() functions (see below). It is never - returned by pcre_exec(). - - PCRE_ERROR_MATCHLIMIT (-8) - - The backtracking limit, as specified by the match_limit field in a - pcre_extra structure (or defaulted) was reached. See the description - above. - - PCRE_ERROR_RECURSIONLIMIT (-21) - - The internal recursion limit, as specified by the match_limit_recursion - field in a pcre_extra structure (or defaulted) was reached. See the - description above. - - PCRE_ERROR_CALLOUT (-9) - - This error is never generated by pcre_exec() itself. It is provided for - use by callout functions that want to yield a distinctive error code. - See the pcrecallout documentation for details. - - PCRE_ERROR_BADUTF8 (-10) - - A string that contains an invalid UTF-8 byte sequence was passed as a - subject. - - PCRE_ERROR_BADUTF8_OFFSET (-11) - - The UTF-8 byte sequence that was passed as a subject was valid, but the - value of startoffset did not point to the beginning of a UTF-8 charac- - ter. - - PCRE_ERROR_PARTIAL (-12) - - The subject string did not match, but it did match partially. See the - pcrepartial documentation for details of partial matching. - - PCRE_ERROR_BADPARTIAL (-13) - - The PCRE_PARTIAL option was used with a compiled pattern containing - items that are not supported for partial matching. See the pcrepartial - documentation for details of partial matching. - - PCRE_ERROR_INTERNAL (-14) - - An unexpected internal error has occurred. This error could be caused - by a bug in PCRE or by overwriting of the compiled pattern. - - PCRE_ERROR_BADCOUNT (-15) - - This error is given if the value of the ovecsize argument is negative. - - -EXTRACTING CAPTURED SUBSTRINGS BY NUMBER - - int pcre_copy_substring(const char *subject, int *ovector, - int stringcount, int stringnumber, char *buffer, - int buffersize); - - int pcre_get_substring(const char *subject, int *ovector, - int stringcount, int stringnumber, - const char **stringptr); - - int pcre_get_substring_list(const char *subject, - int *ovector, int stringcount, const char ***listptr); - - Captured substrings can be accessed directly by using the offsets - returned by pcre_exec() in ovector. For convenience, the functions - pcre_copy_substring(), pcre_get_substring(), and pcre_get_sub- - string_list() are provided for extracting captured substrings as new, - separate, zero-terminated strings. These functions identify substrings - by number. The next section describes functions for extracting named - substrings. - - A substring that contains a binary zero is correctly extracted and has - a further zero added on the end, but the result is not, of course, a C - string. However, you can process such a string by referring to the - length that is returned by pcre_copy_substring() and pcre_get_sub- - string(). Unfortunately, the interface to pcre_get_substring_list() is - not adequate for handling strings containing binary zeros, because the - end of the final string is not independently indicated. - - The first three arguments are the same for all three of these func- - tions: subject is the subject string that has just been successfully - matched, ovector is a pointer to the vector of integer offsets that was - passed to pcre_exec(), and stringcount is the number of substrings that - were captured by the match, including the substring that matched the - entire regular expression. This is the value returned by pcre_exec() if - it is greater than zero. If pcre_exec() returned zero, indicating that - it ran out of space in ovector, the value passed as stringcount should - be the number of elements in the vector divided by three. - - The functions pcre_copy_substring() and pcre_get_substring() extract a - single substring, whose number is given as stringnumber. A value of - zero extracts the substring that matched the entire pattern, whereas - higher values extract the captured substrings. For pcre_copy_sub- - string(), the string is placed in buffer, whose length is given by - buffersize, while for pcre_get_substring() a new block of memory is - obtained via pcre_malloc, and its address is returned via stringptr. - The yield of the function is the length of the string, not including - the terminating zero, or one of - - PCRE_ERROR_NOMEMORY (-6) - - The buffer was too small for pcre_copy_substring(), or the attempt to - get memory failed for pcre_get_substring(). - - PCRE_ERROR_NOSUBSTRING (-7) - - There is no substring whose number is stringnumber. - - The pcre_get_substring_list() function extracts all available sub- - strings and builds a list of pointers to them. All this is done in a - single block of memory that is obtained via pcre_malloc. The address of - the memory block is returned via listptr, which is also the start of - the list of string pointers. The end of the list is marked by a NULL - pointer. The yield of the function is zero if all went well, or - - PCRE_ERROR_NOMEMORY (-6) - - if the attempt to get the memory block failed. - - When any of these functions encounter a substring that is unset, which - can happen when capturing subpattern number n+1 matches some part of - the subject, but subpattern n has not been used at all, they return an - empty string. This can be distinguished from a genuine zero-length sub- - string by inspecting the appropriate offset in ovector, which is nega- - tive for unset substrings. - - The two convenience functions pcre_free_substring() and pcre_free_sub- - string_list() can be used to free the memory returned by a previous - call of pcre_get_substring() or pcre_get_substring_list(), respec- - tively. They do nothing more than call the function pointed to by - pcre_free, which of course could be called directly from a C program. - However, PCRE is used in some situations where it is linked via a spe- - cial interface to another programming language that cannot use - pcre_free directly; it is for these cases that the functions are pro- - vided. - - -EXTRACTING CAPTURED SUBSTRINGS BY NAME - - int pcre_get_stringnumber(const pcre *code, - const char *name); - - int pcre_copy_named_substring(const pcre *code, - const char *subject, int *ovector, - int stringcount, const char *stringname, - char *buffer, int buffersize); - - int pcre_get_named_substring(const pcre *code, - const char *subject, int *ovector, - int stringcount, const char *stringname, - const char **stringptr); - - To extract a substring by name, you first have to find associated num- - ber. For example, for this pattern - - (a+)b(?P<xxx>\d+)... - - the number of the subpattern called "xxx" is 2. If the name is known to - be unique (PCRE_DUPNAMES was not set), you can find the number from the - name by calling pcre_get_stringnumber(). The first argument is the com- - piled pattern, and the second is the name. The yield of the function is - the subpattern number, or PCRE_ERROR_NOSUBSTRING (-7) if there is no - subpattern of that name. - - Given the number, you can extract the substring directly, or use one of - the functions described in the previous section. For convenience, there - are also two functions that do the whole job. - - Most of the arguments of pcre_copy_named_substring() and - pcre_get_named_substring() are the same as those for the similarly - named functions that extract by number. As these are described in the - previous section, they are not re-described here. There are just two - differences: - - First, instead of a substring number, a substring name is given. Sec- - ond, there is an extra argument, given at the start, which is a pointer - to the compiled pattern. This is needed in order to gain access to the - name-to-number translation table. - - These functions call pcre_get_stringnumber(), and if it succeeds, they - then call pcre_copy_substring() or pcre_get_substring(), as appropri- - ate. - - -DUPLICATE SUBPATTERN NAMES - - int pcre_get_stringtable_entries(const pcre *code, - const char *name, char **first, char **last); - - When a pattern is compiled with the PCRE_DUPNAMES option, names for - subpatterns are not required to be unique. Normally, patterns with - duplicate names are such that in any one match, only one of the named - subpatterns participates. An example is shown in the pcrepattern docu- - mentation. When duplicates are present, pcre_copy_named_substring() and - pcre_get_named_substring() return the first substring corresponding to - the given name that is set. If none are set, an empty string is - returned. The pcre_get_stringnumber() function returns one of the num- - bers that are associated with the name, but it is not defined which it - is. - - If you want to get full details of all captured substrings for a given - name, you must use the pcre_get_stringtable_entries() function. The - first argument is the compiled pattern, and the second is the name. The - third and fourth are pointers to variables which are updated by the - function. After it has run, they point to the first and last entries in - the name-to-number table for the given name. The function itself - returns the length of each entry, or PCRE_ERROR_NOSUBSTRING if there - are none. The format of the table is described above in the section - entitled Information about a pattern. Given all the relevant entries - for the name, you can extract each of their numbers, and hence the cap- - tured data, if any. - - -FINDING ALL POSSIBLE MATCHES - - The traditional matching function uses a similar algorithm to Perl, - which stops when it finds the first match, starting at a given point in - the subject. If you want to find all possible matches, or the longest - possible match, consider using the alternative matching function (see - below) instead. If you cannot use the alternative function, but still - need to find all possible matches, you can kludge it up by making use - of the callout facility, which is described in the pcrecallout documen- - tation. - - What you have to do is to insert a callout right at the end of the pat- - tern. When your callout function is called, extract and save the cur- - rent matched substring. Then return 1, which forces pcre_exec() to - backtrack and try other alternatives. Ultimately, when it runs out of - matches, pcre_exec() will yield PCRE_ERROR_NOMATCH. - - -MATCHING A PATTERN: THE ALTERNATIVE FUNCTION - - int pcre_dfa_exec(const pcre *code, const pcre_extra *extra, - const char *subject, int length, int startoffset, - int options, int *ovector, int ovecsize, - int *workspace, int wscount); - - The function pcre_dfa_exec() is called to match a subject string - against a compiled pattern, using a "DFA" matching algorithm. This has - different characteristics to the normal algorithm, and is not compati- - ble with Perl. Some of the features of PCRE patterns are not supported. - Nevertheless, there are times when this kind of matching can be useful. - For a discussion of the two matching algorithms, see the pcrematching - documentation. - - The arguments for the pcre_dfa_exec() function are the same as for - pcre_exec(), plus two extras. The ovector argument is used in a differ- - ent way, and this is described below. The other common arguments are - used in the same way as for pcre_exec(), so their description is not - repeated here. - - The two additional arguments provide workspace for the function. The - workspace vector should contain at least 20 elements. It is used for - keeping track of multiple paths through the pattern tree. More - workspace will be needed for patterns and subjects where there are a - lot of potential matches. - - Here is an example of a simple call to pcre_dfa_exec(): - - int rc; - int ovector[10]; - int wspace[20]; - rc = pcre_dfa_exec( - re, /* result of pcre_compile() */ - NULL, /* we didn't study the pattern */ - "some string", /* the subject string */ - 11, /* the length of the subject string */ - 0, /* start at offset 0 in the subject */ - 0, /* default options */ - ovector, /* vector of integers for substring information */ - 10, /* number of elements (NOT size in bytes) */ - wspace, /* working space vector */ - 20); /* number of elements (NOT size in bytes) */ - - Option bits for pcre_dfa_exec() - - The unused bits of the options argument for pcre_dfa_exec() must be - zero. The only bits that may be set are PCRE_ANCHORED, PCRE_NEW- - LINE_xxx, PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, PCRE_NO_UTF8_CHECK, - PCRE_PARTIAL, PCRE_DFA_SHORTEST, and PCRE_DFA_RESTART. All but the last - three of these are the same as for pcre_exec(), so their description is - not repeated here. - - PCRE_PARTIAL - - This has the same general effect as it does for pcre_exec(), but the - details are slightly different. When PCRE_PARTIAL is set for - pcre_dfa_exec(), the return code PCRE_ERROR_NOMATCH is converted into - PCRE_ERROR_PARTIAL if the end of the subject is reached, there have - been no complete matches, but there is still at least one matching pos- - sibility. The portion of the string that provided the partial match is - set as the first matching string. - - PCRE_DFA_SHORTEST - - Setting the PCRE_DFA_SHORTEST option causes the matching algorithm to - stop as soon as it has found one match. Because of the way the DFA - algorithm works, this is necessarily the shortest possible match at the - first possible matching point in the subject string. - - PCRE_DFA_RESTART - - When pcre_dfa_exec() is called with the PCRE_PARTIAL option, and - returns a partial match, it is possible to call it again, with addi- - tional subject characters, and have it continue with the same match. - The PCRE_DFA_RESTART option requests this action; when it is set, the - workspace and wscount options must reference the same vector as before - because data about the match so far is left in them after a partial - match. There is more discussion of this facility in the pcrepartial - documentation. - - Successful returns from pcre_dfa_exec() - - When pcre_dfa_exec() succeeds, it may have matched more than one sub- - string in the subject. Note, however, that all the matches from one run - of the function start at the same point in the subject. The shorter - matches are all initial substrings of the longer matches. For example, - if the pattern - - <.*> - - is matched against the string - - This is <something> <something else> <something further> no more - - the three matched strings are - - <something> - <something> <something else> - <something> <something else> <something further> - - On success, the yield of the function is a number greater than zero, - which is the number of matched substrings. The substrings themselves - are returned in ovector. Each string uses two elements; the first is - the offset to the start, and the second is the offset to the end. All - the strings have the same start offset. (Space could have been saved by - giving this only once, but it was decided to retain some compatibility - with the way pcre_exec() returns data, even though the meaning of the - strings is different.) - - The strings are returned in reverse order of length; that is, the long- - est matching string is given first. If there were too many matches to - fit into ovector, the yield of the function is zero, and the vector is - filled with the longest matches. - - Error returns from pcre_dfa_exec() - - The pcre_dfa_exec() function returns a negative number when it fails. - Many of the errors are the same as for pcre_exec(), and these are - described above. There are in addition the following errors that are - specific to pcre_dfa_exec(): - - PCRE_ERROR_DFA_UITEM (-16) - - This return is given if pcre_dfa_exec() encounters an item in the pat- - tern that it does not support, for instance, the use of \C or a back - reference. - - PCRE_ERROR_DFA_UCOND (-17) - - This return is given if pcre_dfa_exec() encounters a condition item in - a pattern that uses a back reference for the condition. This is not - supported. - - PCRE_ERROR_DFA_UMLIMIT (-18) - - This return is given if pcre_dfa_exec() is called with an extra block - that contains a setting of the match_limit field. This is not supported - (it is meaningless). - - PCRE_ERROR_DFA_WSSIZE (-19) - - This return is given if pcre_dfa_exec() runs out of space in the - workspace vector. - - PCRE_ERROR_DFA_RECURSE (-20) - - When a recursive subpattern is processed, the matching function calls - itself recursively, using private vectors for ovector and workspace. - This error is given if the output vector is not large enough. This - should be extremely rare, as a vector of size 1000 is used. - -Last updated: 08 June 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - -PCRECALLOUT(3) PCRECALLOUT(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -PCRE CALLOUTS - - int (*pcre_callout)(pcre_callout_block *); - - PCRE provides a feature called "callout", which is a means of temporar- - ily passing control to the caller of PCRE in the middle of pattern - matching. The caller of PCRE provides an external function by putting - its entry point in the global variable pcre_callout. By default, this - variable contains NULL, which disables all calling out. - - Within a regular expression, (?C) indicates the points at which the - external function is to be called. Different callout points can be - identified by putting a number less than 256 after the letter C. The - default value is zero. For example, this pattern has two callout - points: - - (?C1)eabc(?C2)def - - If the PCRE_AUTO_CALLOUT option bit is set when pcre_compile() is - called, PCRE automatically inserts callouts, all with number 255, - before each item in the pattern. For example, if PCRE_AUTO_CALLOUT is - used with the pattern - - A(\d{2}|--) - - it is processed as if it were - - (?C255)A(?C255)((?C255)\d{2}(?C255)|(?C255)-(?C255)-(?C255))(?C255) - - Notice that there is a callout before and after each parenthesis and - alternation bar. Automatic callouts can be used for tracking the - progress of pattern matching. The pcretest command has an option that - sets automatic callouts; when it is used, the output indicates how the - pattern is matched. This is useful information when you are trying to - optimize the performance of a particular pattern. - - -MISSING CALLOUTS - - You should be aware that, because of optimizations in the way PCRE - matches patterns, callouts sometimes do not happen. For example, if the - pattern is - - ab(?C4)cd - - PCRE knows that any matching string must contain the letter "d". If the - subject string is "abyz", the lack of "d" means that matching doesn't - ever start, and the callout is never reached. However, with "abyd", - though the result is still no match, the callout is obeyed. - - -THE CALLOUT INTERFACE - - During matching, when PCRE reaches a callout point, the external func- - tion defined by pcre_callout is called (if it is set). This applies to - both the pcre_exec() and the pcre_dfa_exec() matching functions. The - only argument to the callout function is a pointer to a pcre_callout - block. This structure contains the following fields: - - int version; - int callout_number; - int *offset_vector; - const char *subject; - int subject_length; - int start_match; - int current_position; - int capture_top; - int capture_last; - void *callout_data; - int pattern_position; - int next_item_length; - - The version field is an integer containing the version number of the - block format. The initial version was 0; the current version is 1. The - version number will change again in future if additional fields are - added, but the intention is never to remove any of the existing fields. - - The callout_number field contains the number of the callout, as com- - piled into the pattern (that is, the number after ?C for manual call- - outs, and 255 for automatically generated callouts). - - The offset_vector field is a pointer to the vector of offsets that was - passed by the caller to pcre_exec() or pcre_dfa_exec(). When - pcre_exec() is used, the contents can be inspected in order to extract - substrings that have been matched so far, in the same way as for - extracting substrings after a match has completed. For pcre_dfa_exec() - this field is not useful. - - The subject and subject_length fields contain copies of the values that - were passed to pcre_exec(). - - The start_match field contains the offset within the subject at which - the current match attempt started. If the pattern is not anchored, the - callout function may be called several times from the same point in the - pattern for different starting points in the subject. - - The current_position field contains the offset within the subject of - the current match pointer. - - When the pcre_exec() function is used, the capture_top field contains - one more than the number of the highest numbered captured substring so - far. If no substrings have been captured, the value of capture_top is - one. This is always the case when pcre_dfa_exec() is used, because it - does not support captured substrings. - - The capture_last field contains the number of the most recently cap- - tured substring. If no substrings have been captured, its value is -1. - This is always the case when pcre_dfa_exec() is used. - - The callout_data field contains a value that is passed to pcre_exec() - or pcre_dfa_exec() specifically so that it can be passed back in call- - outs. It is passed in the pcre_callout field of the pcre_extra data - structure. If no such data was passed, the value of callout_data in a - pcre_callout block is NULL. There is a description of the pcre_extra - structure in the pcreapi documentation. - - The pattern_position field is present from version 1 of the pcre_call- - out structure. It contains the offset to the next item to be matched in - the pattern string. - - The next_item_length field is present from version 1 of the pcre_call- - out structure. It contains the length of the next item to be matched in - the pattern string. When the callout immediately precedes an alterna- - tion bar, a closing parenthesis, or the end of the pattern, the length - is zero. When the callout precedes an opening parenthesis, the length - is that of the entire subpattern. - - The pattern_position and next_item_length fields are intended to help - in distinguishing between different automatic callouts, which all have - the same callout number. However, they are set for all callouts. - - -RETURN VALUES - - The external callout function returns an integer to PCRE. If the value - is zero, matching proceeds as normal. If the value is greater than - zero, matching fails at the current point, but the testing of other - matching possibilities goes ahead, just as if a lookahead assertion had - failed. If the value is less than zero, the match is abandoned, and - pcre_exec() (or pcre_dfa_exec()) returns the negative value. - - Negative values should normally be chosen from the set of - PCRE_ERROR_xxx values. In particular, PCRE_ERROR_NOMATCH forces a stan- - dard "no match" failure. The error number PCRE_ERROR_CALLOUT is - reserved for use by callout functions; it will never be used by PCRE - itself. - -Last updated: 28 February 2005 -Copyright (c) 1997-2005 University of Cambridge. ------------------------------------------------------------------------------- - - -PCRECOMPAT(3) PCRECOMPAT(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -DIFFERENCES BETWEEN PCRE AND PERL - - This document describes the differences in the ways that PCRE and Perl - handle regular expressions. The differences described here are with - respect to Perl 5.8. - - 1. PCRE has only a subset of Perl's UTF-8 and Unicode support. Details - of what it does have are given in the section on UTF-8 support in the - main pcre page. - - 2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl - permits them, but they do not mean what you might think. For example, - (?!a){3} does not assert that the next three characters are not "a". It - just asserts that the next character is not "a" three times. - - 3. Capturing subpatterns that occur inside negative lookahead asser- - tions are counted, but their entries in the offsets vector are never - set. Perl sets its numerical variables from any such patterns that are - matched before the assertion fails to match something (thereby succeed- - ing), but only if the negative lookahead assertion contains just one - branch. - - 4. Though binary zero characters are supported in the subject string, - they are not allowed in a pattern string because it is passed as a nor- - mal C string, terminated by zero. The escape sequence \0 can be used in - the pattern to represent a binary zero. - - 5. The following Perl escape sequences are not supported: \l, \u, \L, - \U, and \N. In fact these are implemented by Perl's general string-han- - dling and are not part of its pattern matching engine. If any of these - are encountered by PCRE, an error is generated. - - 6. The Perl escape sequences \p, \P, and \X are supported only if PCRE - is built with Unicode character property support. The properties that - can be tested with \p and \P are limited to the general category prop- - erties such as Lu and Nd, script names such as Greek or Han, and the - derived properties Any and L&. - - 7. PCRE does support the \Q...\E escape for quoting substrings. Charac- - ters in between are treated as literals. This is slightly different - from Perl in that $ and @ are also handled as literals inside the - quotes. In Perl, they cause variable interpolation (but of course PCRE - does not have variables). Note the following examples: - - Pattern PCRE matches Perl matches - - \Qabc$xyz\E abc$xyz abc followed by the - contents of $xyz - \Qabc\$xyz\E abc\$xyz abc\$xyz - \Qabc\E\$\Qxyz\E abc$xyz abc$xyz - - The \Q...\E sequence is recognized both inside and outside character - classes. - - 8. Fairly obviously, PCRE does not support the (?{code}) and (?p{code}) - constructions. However, there is support for recursive patterns using - the non-Perl items (?R), (?number), and (?P>name). Also, the PCRE - "callout" feature allows an external function to be called during pat- - tern matching. See the pcrecallout documentation for details. - - 9. There are some differences that are concerned with the settings of - captured strings when part of a pattern is repeated. For example, - matching "aba" against the pattern /^(a(b)?)+$/ in Perl leaves $2 - unset, but in PCRE it is set to "b". - - 10. PCRE provides some extensions to the Perl regular expression facil- - ities: - - (a) Although lookbehind assertions must match fixed length strings, - each alternative branch of a lookbehind assertion can match a different - length of string. Perl requires them all to have the same length. - - (b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $ - meta-character matches only at the very end of the string. - - (c) If PCRE_EXTRA is set, a backslash followed by a letter with no spe- - cial meaning is faulted. Otherwise, like Perl, the backslash is - ignored. (Perl can be made to issue a warning.) - - (d) If PCRE_UNGREEDY is set, the greediness of the repetition quanti- - fiers is inverted, that is, by default they are not greedy, but if fol- - lowed by a question mark they are. - - (e) PCRE_ANCHORED can be used at matching time to force a pattern to be - tried only at the first matching position in the subject string. - - (f) The PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, and PCRE_NO_AUTO_CAP- - TURE options for pcre_exec() have no Perl equivalents. - - (g) The (?R), (?number), and (?P>name) constructs allows for recursive - pattern matching (Perl can do this using the (?p{code}) construct, - which PCRE cannot support.) - - (h) PCRE supports named capturing substrings, using the Python syntax. - - (i) PCRE supports the possessive quantifier "++" syntax, taken from - Sun's Java package. - - (j) The (R) condition, for testing recursion, is a PCRE extension. - - (k) The callout facility is PCRE-specific. - - (l) The partial matching facility is PCRE-specific. - - (m) Patterns compiled by PCRE can be saved and re-used at a later time, - even on different hosts that have the other endianness. - - (n) The alternative matching function (pcre_dfa_exec()) matches in a - different way and is not Perl-compatible. - -Last updated: 06 June 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - -PCREPATTERN(3) PCREPATTERN(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -PCRE REGULAR EXPRESSION DETAILS - - The syntax and semantics of the regular expressions supported by PCRE - are described below. Regular expressions are also described in the Perl - documentation and in a number of books, some of which have copious - examples. Jeffrey Friedl's "Mastering Regular Expressions", published - by O'Reilly, covers regular expressions in great detail. This descrip- - tion of PCRE's regular expressions is intended as reference material. - - The original operation of PCRE was on strings of one-byte characters. - However, there is now also support for UTF-8 character strings. To use - this, you must build PCRE to include UTF-8 support, and then call - pcre_compile() with the PCRE_UTF8 option. How this affects pattern - matching is mentioned in several places below. There is also a summary - of UTF-8 features in the section on UTF-8 support in the main pcre - page. - - The remainder of this document discusses the patterns that are sup- - ported by PCRE when its main matching function, pcre_exec(), is used. - From release 6.0, PCRE offers a second matching function, - pcre_dfa_exec(), which matches using a different algorithm that is not - Perl-compatible. The advantages and disadvantages of the alternative - function, and how it differs from the normal function, are discussed in - the pcrematching page. - - A regular expression is a pattern that is matched against a subject - string from left to right. Most characters stand for themselves in a - pattern, and match the corresponding characters in the subject. As a - trivial example, the pattern - - The quick brown fox - - matches a portion of a subject string that is identical to itself. When - caseless matching is specified (the PCRE_CASELESS option), letters are - matched independently of case. In UTF-8 mode, PCRE always understands - the concept of case for characters whose values are less than 128, so - caseless matching is always possible. For characters with higher val- - ues, the concept of case is supported if PCRE is compiled with Unicode - property support, but not otherwise. If you want to use caseless - matching for characters 128 and above, you must ensure that PCRE is - compiled with Unicode property support as well as with UTF-8 support. - - The power of regular expressions comes from the ability to include - alternatives and repetitions in the pattern. These are encoded in the - pattern by the use of metacharacters, which do not stand for themselves - but instead are interpreted in some special way. - - There are two different sets of metacharacters: those that are recog- - nized anywhere in the pattern except within square brackets, and those - that are recognized in square brackets. Outside square brackets, the - metacharacters are as follows: - - \ general escape character with several uses - ^ assert start of string (or line, in multiline mode) - $ assert end of string (or line, in multiline mode) - . match any character except newline (by default) - [ start character class definition - | start of alternative branch - ( start subpattern - ) end subpattern - ? extends the meaning of ( - also 0 or 1 quantifier - also quantifier minimizer - * 0 or more quantifier - + 1 or more quantifier - also "possessive quantifier" - { start min/max quantifier - - Part of a pattern that is in square brackets is called a "character - class". In a character class the only metacharacters are: - - \ general escape character - ^ negate the class, but only if the first character - - indicates character range - [ POSIX character class (only if followed by POSIX - syntax) - ] terminates the character class - - The following sections describe the use of each of the metacharacters. - - -BACKSLASH - - The backslash character has several uses. Firstly, if it is followed by - a non-alphanumeric character, it takes away any special meaning that - character may have. This use of backslash as an escape character - applies both inside and outside character classes. - - For example, if you want to match a * character, you write \* in the - pattern. This escaping action applies whether or not the following - character would otherwise be interpreted as a metacharacter, so it is - always safe to precede a non-alphanumeric with backslash to specify - that it stands for itself. In particular, if you want to match a back- - slash, you write \\. - - If a pattern is compiled with the PCRE_EXTENDED option, whitespace in - the pattern (other than in a character class) and characters between a - # outside a character class and the next newline are ignored. An escap- - ing backslash can be used to include a whitespace or # character as - part of the pattern. - - If you want to remove the special meaning from a sequence of charac- - ters, you can do so by putting them between \Q and \E. This is differ- - ent from Perl in that $ and @ are handled as literals in \Q...\E - sequences in PCRE, whereas in Perl, $ and @ cause variable interpola- - tion. Note the following examples: - - Pattern PCRE matches Perl matches - - \Qabc$xyz\E abc$xyz abc followed by the - contents of $xyz - \Qabc\$xyz\E abc\$xyz abc\$xyz - \Qabc\E\$\Qxyz\E abc$xyz abc$xyz - - The \Q...\E sequence is recognized both inside and outside character - classes. - - Non-printing characters - - A second use of backslash provides a way of encoding non-printing char- - acters in patterns in a visible manner. There is no restriction on the - appearance of non-printing characters, apart from the binary zero that - terminates a pattern, but when a pattern is being prepared by text - editing, it is usually easier to use one of the following escape - sequences than the binary character it represents: - - \a alarm, that is, the BEL character (hex 07) - \cx "control-x", where x is any character - \e escape (hex 1B) - \f formfeed (hex 0C) - \n newline (hex 0A) - \r carriage return (hex 0D) - \t tab (hex 09) - \ddd character with octal code ddd, or backreference - \xhh character with hex code hh - \x{hhh..} character with hex code hhh.. - - The precise effect of \cx is as follows: if x is a lower case letter, - it is converted to upper case. Then bit 6 of the character (hex 40) is - inverted. Thus \cz becomes hex 1A, but \c{ becomes hex 3B, while \c; - becomes hex 7B. - - After \x, from zero to two hexadecimal digits are read (letters can be - in upper or lower case). Any number of hexadecimal digits may appear - between \x{ and }, but the value of the character code must be less - than 256 in non-UTF-8 mode, and less than 2**31 in UTF-8 mode (that is, - the maximum hexadecimal value is 7FFFFFFF). If characters other than - hexadecimal digits appear between \x{ and }, or if there is no termi- - nating }, this form of escape is not recognized. Instead, the initial - \x will be interpreted as a basic hexadecimal escape, with no following - digits, giving a character whose value is zero. - - Characters whose value is less than 256 can be defined by either of the - two syntaxes for \x. There is no difference in the way they are han- - dled. For example, \xdc is exactly the same as \x{dc}. - - After \0 up to two further octal digits are read. If there are fewer - than two digits, just those that are present are used. Thus the - sequence \0\x\07 specifies two binary zeros followed by a BEL character - (code value 7). Make sure you supply two digits after the initial zero - if the pattern character that follows is itself an octal digit. - - The handling of a backslash followed by a digit other than 0 is compli- - cated. Outside a character class, PCRE reads it and any following dig- - its as a decimal number. If the number is less than 10, or if there - have been at least that many previous capturing left parentheses in the - expression, the entire sequence is taken as a back reference. A - description of how this works is given later, following the discussion - of parenthesized subpatterns. - - Inside a character class, or if the decimal number is greater than 9 - and there have not been that many capturing subpatterns, PCRE re-reads - up to three octal digits following the backslash, ane uses them to gen- - erate a data character. Any subsequent digits stand for themselves. In - non-UTF-8 mode, the value of a character specified in octal must be - less than \400. In UTF-8 mode, values up to \777 are permitted. For - example: - - \040 is another way of writing a space - \40 is the same, provided there are fewer than 40 - previous capturing subpatterns - \7 is always a back reference - \11 might be a back reference, or another way of - writing a tab - \011 is always a tab - \0113 is a tab followed by the character "3" - \113 might be a back reference, otherwise the - character with octal code 113 - \377 might be a back reference, otherwise - the byte consisting entirely of 1 bits - \81 is either a back reference, or a binary zero - followed by the two characters "8" and "1" - - Note that octal values of 100 or greater must not be introduced by a - leading zero, because no more than three octal digits are ever read. - - All the sequences that define a single character value can be used both - inside and outside character classes. In addition, inside a character - class, the sequence \b is interpreted as the backspace character (hex - 08), and the sequence \X is interpreted as the character "X". Outside a - character class, these sequences have different meanings (see below). - - Generic character types - - The third use of backslash is for specifying generic character types. - The following are always recognized: - - \d any decimal digit - \D any character that is not a decimal digit - \s any whitespace character - \S any character that is not a whitespace character - \w any "word" character - \W any "non-word" character - - Each pair of escape sequences partitions the complete set of characters - into two disjoint sets. Any given character matches one, and only one, - of each pair. - - These character type sequences can appear both inside and outside char- - acter classes. They each match one character of the appropriate type. - If the current matching point is at the end of the subject string, all - of them fail, since there is no character to match. - - For compatibility with Perl, \s does not match the VT character (code - 11). This makes it different from the the POSIX "space" class. The \s - characters are HT (9), LF (10), FF (12), CR (13), and space (32). (If - "use locale;" is included in a Perl script, \s may match the VT charac- - ter. In PCRE, it never does.) - - A "word" character is an underscore or any character less than 256 that - is a letter or digit. The definition of letters and digits is con- - trolled by PCRE's low-valued character tables, and may vary if locale- - specific matching is taking place (see "Locale support" in the pcreapi - page). For example, in the "fr_FR" (French) locale, some character - codes greater than 128 are used for accented letters, and these are - matched by \w. - - In UTF-8 mode, characters with values greater than 128 never match \d, - \s, or \w, and always match \D, \S, and \W. This is true even when Uni- - code character property support is available. The use of locales with - Unicode is discouraged. - - Unicode character properties - - When PCRE is built with Unicode character property support, three addi- - tional escape sequences to match character properties are available - when UTF-8 mode is selected. They are: - - \p{xx} a character with the xx property - \P{xx} a character without the xx property - \X an extended Unicode sequence - - The property names represented by xx above are limited to the Unicode - script names, the general category properties, and "Any", which matches - any character (including newline). Other properties such as "InMusical- - Symbols" are not currently supported by PCRE. Note that \P{Any} does - not match any characters, so always causes a match failure. - - Sets of Unicode characters are defined as belonging to certain scripts. - A character from one of these sets can be matched using a script name. - For example: - - \p{Greek} - \P{Han} - - Those that are not part of an identified script are lumped together as - "Common". The current list of scripts is: - - Arabic, Armenian, Bengali, Bopomofo, Braille, Buginese, Buhid, Cana- - dian_Aboriginal, Cherokee, Common, Coptic, Cypriot, Cyrillic, Deseret, - Devanagari, Ethiopic, Georgian, Glagolitic, Gothic, Greek, Gujarati, - Gurmukhi, Han, Hangul, Hanunoo, Hebrew, Hiragana, Inherited, Kannada, - Katakana, Kharoshthi, Khmer, Lao, Latin, Limbu, Linear_B, Malayalam, - Mongolian, Myanmar, New_Tai_Lue, Ogham, Old_Italic, Old_Persian, Oriya, - Osmanya, Runic, Shavian, Sinhala, Syloti_Nagri, Syriac, Tagalog, Tag- - banwa, Tai_Le, Tamil, Telugu, Thaana, Thai, Tibetan, Tifinagh, - Ugaritic, Yi. - - Each character has exactly one general category property, specified by - a two-letter abbreviation. For compatibility with Perl, negation can be - specified by including a circumflex between the opening brace and the - property name. For example, \p{^Lu} is the same as \P{Lu}. - - If only one letter is specified with \p or \P, it includes all the gen- - eral category properties that start with that letter. In this case, in - the absence of negation, the curly brackets in the escape sequence are - optional; these two examples have the same effect: - - \p{L} - \pL - - The following general category property codes are supported: - - C Other - Cc Control - Cf Format - Cn Unassigned - Co Private use - Cs Surrogate - - L Letter - Ll Lower case letter - Lm Modifier letter - Lo Other letter - Lt Title case letter - Lu Upper case letter - - M Mark - Mc Spacing mark - Me Enclosing mark - Mn Non-spacing mark - - N Number - Nd Decimal number - Nl Letter number - No Other number - - P Punctuation - Pc Connector punctuation - Pd Dash punctuation - Pe Close punctuation - Pf Final punctuation - Pi Initial punctuation - Po Other punctuation - Ps Open punctuation - - S Symbol - Sc Currency symbol - Sk Modifier symbol - Sm Mathematical symbol - So Other symbol - - Z Separator - Zl Line separator - Zp Paragraph separator - Zs Space separator - - The special property L& is also supported: it matches a character that - has the Lu, Ll, or Lt property, in other words, a letter that is not - classified as a modifier or "other". - - The long synonyms for these properties that Perl supports (such as - \p{Letter}) are not supported by PCRE, nor is it permitted to prefix - any of these properties with "Is". - - No character that is in the Unicode table has the Cn (unassigned) prop- - erty. Instead, this property is assumed for any code point that is not - in the Unicode table. - - Specifying caseless matching does not affect these escape sequences. - For example, \p{Lu} always matches only upper case letters. - - The \X escape matches any number of Unicode characters that form an - extended Unicode sequence. \X is equivalent to - - (?>\PM\pM*) - - That is, it matches a character without the "mark" property, followed - by zero or more characters with the "mark" property, and treats the - sequence as an atomic group (see below). Characters with the "mark" - property are typically accents that affect the preceding character. - - Matching characters by Unicode property is not fast, because PCRE has - to search a structure that contains data for over fifteen thousand - characters. That is why the traditional escape sequences such as \d and - \w do not use Unicode properties in PCRE. - - Simple assertions - - The fourth use of backslash is for certain simple assertions. An asser- - tion specifies a condition that has to be met at a particular point in - a match, without consuming any characters from the subject string. The - use of subpatterns for more complicated assertions is described below. - The backslashed assertions are: - - \b matches at a word boundary - \B matches when not at a word boundary - \A matches at start of subject - \Z matches at end of subject or before newline at end - \z matches at end of subject - \G matches at first matching position in subject - - These assertions may not appear in character classes (but note that \b - has a different meaning, namely the backspace character, inside a char- - acter class). - - A word boundary is a position in the subject string where the current - character and the previous character do not both match \w or \W (i.e. - one matches \w and the other matches \W), or the start or end of the - string if the first or last character matches \w, respectively. - - The \A, \Z, and \z assertions differ from the traditional circumflex - and dollar (described in the next section) in that they only ever match - at the very start and end of the subject string, whatever options are - set. Thus, they are independent of multiline mode. These three asser- - tions are not affected by the PCRE_NOTBOL or PCRE_NOTEOL options, which - affect only the behaviour of the circumflex and dollar metacharacters. - However, if the startoffset argument of pcre_exec() is non-zero, indi- - cating that matching is to start at a point other than the beginning of - the subject, \A can never match. The difference between \Z and \z is - that \Z matches before a newline at the end of the string as well as at - the very end, whereas \z matches only at the end. - - The \G assertion is true only when the current matching position is at - the start point of the match, as specified by the startoffset argument - of pcre_exec(). It differs from \A when the value of startoffset is - non-zero. By calling pcre_exec() multiple times with appropriate argu- - ments, you can mimic Perl's /g option, and it is in this kind of imple- - mentation where \G can be useful. - - Note, however, that PCRE's interpretation of \G, as the start of the - current match, is subtly different from Perl's, which defines it as the - end of the previous match. In Perl, these can be different when the - previously matched string was empty. Because PCRE does just one match - at a time, it cannot reproduce this behaviour. - - If all the alternatives of a pattern begin with \G, the expression is - anchored to the starting match position, and the "anchored" flag is set - in the compiled regular expression. - - -CIRCUMFLEX AND DOLLAR - - Outside a character class, in the default matching mode, the circumflex - character is an assertion that is true only if the current matching - point is at the start of the subject string. If the startoffset argu- - ment of pcre_exec() is non-zero, circumflex can never match if the - PCRE_MULTILINE option is unset. Inside a character class, circumflex - has an entirely different meaning (see below). - - Circumflex need not be the first character of the pattern if a number - of alternatives are involved, but it should be the first thing in each - alternative in which it appears if the pattern is ever to match that - branch. If all possible alternatives start with a circumflex, that is, - if the pattern is constrained to match only at the start of the sub- - ject, it is said to be an "anchored" pattern. (There are also other - constructs that can cause a pattern to be anchored.) - - A dollar character is an assertion that is true only if the current - matching point is at the end of the subject string, or immediately - before a newline at the end of the string (by default). Dollar need not - be the last character of the pattern if a number of alternatives are - involved, but it should be the last item in any branch in which it - appears. Dollar has no special meaning in a character class. - - The meaning of dollar can be changed so that it matches only at the - very end of the string, by setting the PCRE_DOLLAR_ENDONLY option at - compile time. This does not affect the \Z assertion. - - The meanings of the circumflex and dollar characters are changed if the - PCRE_MULTILINE option is set. When this is the case, a circumflex - matches immediately after internal newlines as well as at the start of - the subject string. It does not match after a newline that ends the - string. A dollar matches before any newlines in the string, as well as - at the very end, when PCRE_MULTILINE is set. When newline is specified - as the two-character sequence CRLF, isolated CR and LF characters do - not indicate newlines. - - For example, the pattern /^abc$/ matches the subject string "def\nabc" - (where \n represents a newline) in multiline mode, but not otherwise. - Consequently, patterns that are anchored in single line mode because - all branches start with ^ are not anchored in multiline mode, and a - match for circumflex is possible when the startoffset argument of - pcre_exec() is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if - PCRE_MULTILINE is set. - - Note that the sequences \A, \Z, and \z can be used to match the start - and end of the subject in both modes, and if all branches of a pattern - start with \A it is always anchored, whether or not PCRE_MULTILINE is - set. - - -FULL STOP (PERIOD, DOT) - - Outside a character class, a dot in the pattern matches any one charac- - ter in the subject string except (by default) a character that signi- - fies the end of a line. In UTF-8 mode, the matched character may be - more than one byte long. When a line ending is defined as a single - character (CR or LF), dot never matches that character; when the two- - character sequence CRLF is used, dot does not match CR if it is immedi- - ately followed by LF, but otherwise it matches all characters (includ- - ing isolated CRs and LFs). - - The behaviour of dot with regard to newlines can be changed. If the - PCRE_DOTALL option is set, a dot matches any one character, without - exception. If newline is defined as the two-character sequence CRLF, it - takes two dots to match it. - - The handling of dot is entirely independent of the handling of circum- - flex and dollar, the only relationship being that they both involve - newlines. Dot has no special meaning in a character class. - - -MATCHING A SINGLE BYTE - - Outside a character class, the escape sequence \C matches any one byte, - both in and out of UTF-8 mode. Unlike a dot, it always matches CR and - LF. The feature is provided in Perl in order to match individual bytes - in UTF-8 mode. Because it breaks up UTF-8 characters into individual - bytes, what remains in the string may be a malformed UTF-8 string. For - this reason, the \C escape sequence is best avoided. - - PCRE does not allow \C to appear in lookbehind assertions (described - below), because in UTF-8 mode this would make it impossible to calcu- - late the length of the lookbehind. - - -SQUARE BRACKETS AND CHARACTER CLASSES - - An opening square bracket introduces a character class, terminated by a - closing square bracket. A closing square bracket on its own is not spe- - cial. If a closing square bracket is required as a member of the class, - it should be the first data character in the class (after an initial - circumflex, if present) or escaped with a backslash. - - A character class matches a single character in the subject. In UTF-8 - mode, the character may occupy more than one byte. A matched character - must be in the set of characters defined by the class, unless the first - character in the class definition is a circumflex, in which case the - subject character must not be in the set defined by the class. If a - circumflex is actually required as a member of the class, ensure it is - not the first character, or escape it with a backslash. - - For example, the character class [aeiou] matches any lower case vowel, - while [^aeiou] matches any character that is not a lower case vowel. - Note that a circumflex is just a convenient notation for specifying the - characters that are in the class by enumerating those that are not. A - class that starts with a circumflex is not an assertion: it still con- - sumes a character from the subject string, and therefore it fails if - the current pointer is at the end of the string. - - In UTF-8 mode, characters with values greater than 255 can be included - in a class as a literal string of bytes, or by using the \x{ escaping - mechanism. - - When caseless matching is set, any letters in a class represent both - their upper case and lower case versions, so for example, a caseless - [aeiou] matches "A" as well as "a", and a caseless [^aeiou] does not - match "A", whereas a caseful version would. In UTF-8 mode, PCRE always - understands the concept of case for characters whose values are less - than 128, so caseless matching is always possible. For characters with - higher values, the concept of case is supported if PCRE is compiled - with Unicode property support, but not otherwise. If you want to use - caseless matching for characters 128 and above, you must ensure that - PCRE is compiled with Unicode property support as well as with UTF-8 - support. - - Characters that might indicate line breaks (CR and LF) are never - treated in any special way when matching character classes, whatever - line-ending sequence is in use, and whatever setting of the PCRE_DOTALL - and PCRE_MULTILINE options is used. A class such as [^a] always matches - one of these characters. - - The minus (hyphen) character can be used to specify a range of charac- - ters in a character class. For example, [d-m] matches any letter - between d and m, inclusive. If a minus character is required in a - class, it must be escaped with a backslash or appear in a position - where it cannot be interpreted as indicating a range, typically as the - first or last character in the class. - - It is not possible to have the literal character "]" as the end charac- - ter of a range. A pattern such as [W-]46] is interpreted as a class of - two characters ("W" and "-") followed by a literal string "46]", so it - would match "W46]" or "-46]". However, if the "]" is escaped with a - backslash it is interpreted as the end of range, so [W-\]46] is inter- - preted as a class containing a range followed by two other characters. - The octal or hexadecimal representation of "]" can also be used to end - a range. - - Ranges operate in the collating sequence of character values. They can - also be used for characters specified numerically, for example - [\000-\037]. In UTF-8 mode, ranges can include characters whose values - are greater than 255, for example [\x{100}-\x{2ff}]. - - If a range that includes letters is used when caseless matching is set, - it matches the letters in either case. For example, [W-c] is equivalent - to [][\\^_`wxyzabc], matched caselessly, and in non-UTF-8 mode, if - character tables for the "fr_FR" locale are in use, [\xc8-\xcb] matches - accented E characters in both cases. In UTF-8 mode, PCRE supports the - concept of case for characters with values greater than 128 only when - it is compiled with Unicode property support. - - The character types \d, \D, \p, \P, \s, \S, \w, and \W may also appear - in a character class, and add the characters that they match to the - class. For example, [\dABCDEF] matches any hexadecimal digit. A circum- - flex can conveniently be used with the upper case character types to - specify a more restricted set of characters than the matching lower - case type. For example, the class [^\W_] matches any letter or digit, - but not underscore. - - The only metacharacters that are recognized in character classes are - backslash, hyphen (only where it can be interpreted as specifying a - range), circumflex (only at the start), opening square bracket (only - when it can be interpreted as introducing a POSIX class name - see the - next section), and the terminating closing square bracket. However, - escaping other non-alphanumeric characters does no harm. - - -POSIX CHARACTER CLASSES - - Perl supports the POSIX notation for character classes. This uses names - enclosed by [: and :] within the enclosing square brackets. PCRE also - supports this notation. For example, - - [01[:alpha:]%] - - matches "0", "1", any alphabetic character, or "%". The supported class - names are - - alnum letters and digits - alpha letters - ascii character codes 0 - 127 - blank space or tab only - cntrl control characters - digit decimal digits (same as \d) - graph printing characters, excluding space - lower lower case letters - print printing characters, including space - punct printing characters, excluding letters and digits - space white space (not quite the same as \s) - upper upper case letters - word "word" characters (same as \w) - xdigit hexadecimal digits - - The "space" characters are HT (9), LF (10), VT (11), FF (12), CR (13), - and space (32). Notice that this list includes the VT character (code - 11). This makes "space" different to \s, which does not include VT (for - Perl compatibility). - - The name "word" is a Perl extension, and "blank" is a GNU extension - from Perl 5.8. Another Perl extension is negation, which is indicated - by a ^ character after the colon. For example, - - [12[:^digit:]] - - matches "1", "2", or any non-digit. PCRE (and Perl) also recognize the - POSIX syntax [.ch.] and [=ch=] where "ch" is a "collating element", but - these are not supported, and an error is given if they are encountered. - - In UTF-8 mode, characters with values greater than 128 do not match any - of the POSIX character classes. - - -VERTICAL BAR - - Vertical bar characters are used to separate alternative patterns. For - example, the pattern - - gilbert|sullivan - - matches either "gilbert" or "sullivan". Any number of alternatives may - appear, and an empty alternative is permitted (matching the empty - string). The matching process tries each alternative in turn, from left - to right, and the first one that succeeds is used. If the alternatives - are within a subpattern (defined below), "succeeds" means matching the - rest of the main pattern as well as the alternative in the subpattern. - - -INTERNAL OPTION SETTING - - The settings of the PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and - PCRE_EXTENDED options can be changed from within the pattern by a - sequence of Perl option letters enclosed between "(?" and ")". The - option letters are - - i for PCRE_CASELESS - m for PCRE_MULTILINE - s for PCRE_DOTALL - x for PCRE_EXTENDED - - For example, (?im) sets caseless, multiline matching. It is also possi- - ble to unset these options by preceding the letter with a hyphen, and a - combined setting and unsetting such as (?im-sx), which sets PCRE_CASE- - LESS and PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED, - is also permitted. If a letter appears both before and after the - hyphen, the option is unset. - - When an option change occurs at top level (that is, not inside subpat- - tern parentheses), the change applies to the remainder of the pattern - that follows. If the change is placed right at the start of a pattern, - PCRE extracts it into the global options (and it will therefore show up - in data extracted by the pcre_fullinfo() function). - - An option change within a subpattern affects only that part of the cur- - rent pattern that follows it, so - - (a(?i)b)c - - matches abc and aBc and no other strings (assuming PCRE_CASELESS is not - used). By this means, options can be made to have different settings - in different parts of the pattern. Any changes made in one alternative - do carry on into subsequent branches within the same subpattern. For - example, - - (a(?i)b|c) - - matches "ab", "aB", "c", and "C", even though when matching "C" the - first branch is abandoned before the option setting. This is because - the effects of option settings happen at compile time. There would be - some very weird behaviour otherwise. - - The PCRE-specific options PCRE_DUPNAMES, PCRE_UNGREEDY, and PCRE_EXTRA - can be changed in the same way as the Perl-compatible options by using - the characters J, U and X respectively. - - -SUBPATTERNS - - Subpatterns are delimited by parentheses (round brackets), which can be - nested. Turning part of a pattern into a subpattern does two things: - - 1. It localizes a set of alternatives. For example, the pattern - - cat(aract|erpillar|) - - matches one of the words "cat", "cataract", or "caterpillar". Without - the parentheses, it would match "cataract", "erpillar" or the empty - string. - - 2. It sets up the subpattern as a capturing subpattern. This means - that, when the whole pattern matches, that portion of the subject - string that matched the subpattern is passed back to the caller via the - ovector argument of pcre_exec(). Opening parentheses are counted from - left to right (starting from 1) to obtain numbers for the capturing - subpatterns. - - For example, if the string "the red king" is matched against the pat- - tern - - the ((red|white) (king|queen)) - - the captured substrings are "red king", "red", and "king", and are num- - bered 1, 2, and 3, respectively. - - The fact that plain parentheses fulfil two functions is not always - helpful. There are often times when a grouping subpattern is required - without a capturing requirement. If an opening parenthesis is followed - by a question mark and a colon, the subpattern does not do any captur- - ing, and is not counted when computing the number of any subsequent - capturing subpatterns. For example, if the string "the white queen" is - matched against the pattern - - the ((?:red|white) (king|queen)) - - the captured substrings are "white queen" and "queen", and are numbered - 1 and 2. The maximum number of capturing subpatterns is 65535, and the - maximum depth of nesting of all subpatterns, both capturing and non- - capturing, is 200. - - As a convenient shorthand, if any option settings are required at the - start of a non-capturing subpattern, the option letters may appear - between the "?" and the ":". Thus the two patterns - - (?i:saturday|sunday) - (?:(?i)saturday|sunday) - - match exactly the same set of strings. Because alternative branches are - tried from left to right, and options are not reset until the end of - the subpattern is reached, an option setting in one branch does affect - subsequent branches, so the above patterns match "SUNDAY" as well as - "Saturday". - - -NAMED SUBPATTERNS - - Identifying capturing parentheses by number is simple, but it can be - very hard to keep track of the numbers in complicated regular expres- - sions. Furthermore, if an expression is modified, the numbers may - change. To help with this difficulty, PCRE supports the naming of sub- - patterns, something that Perl does not provide. The Python syntax - (?P<name>...) is used. References to capturing parentheses from other - parts of the pattern, such as backreferences, recursion, and condi- - tions, can be made by name as well as by number. - - Names consist of up to 32 alphanumeric characters and underscores. - Named capturing parentheses are still allocated numbers as well as - names. The PCRE API provides function calls for extracting the name-to- - number translation table from a compiled pattern. There is also a con- - venience function for extracting a captured substring by name. - - By default, a name must be unique within a pattern, but it is possible - to relax this constraint by setting the PCRE_DUPNAMES option at compile - time. This can be useful for patterns where only one instance of the - named parentheses can match. Suppose you want to match the name of a - weekday, either as a 3-letter abbreviation or as the full name, and in - both cases you want to extract the abbreviation. This pattern (ignoring - the line breaks) does the job: - - (?P<DN>Mon|Fri|Sun)(?:day)?| - (?P<DN>Tue)(?:sday)?| - (?P<DN>Wed)(?:nesday)?| - (?P<DN>Thu)(?:rsday)?| - (?P<DN>Sat)(?:urday)? - - There are five capturing substrings, but only one is ever set after a - match. The convenience function for extracting the data by name - returns the substring for the first, and in this example, the only, - subpattern of that name that matched. This saves searching to find - which numbered subpattern it was. If you make a reference to a non- - unique named subpattern from elsewhere in the pattern, the one that - corresponds to the lowest number is used. For further details of the - interfaces for handling named subpatterns, see the pcreapi documenta- - tion. - - -REPETITION - - Repetition is specified by quantifiers, which can follow any of the - following items: - - a literal data character - the . metacharacter - the \C escape sequence - the \X escape sequence (in UTF-8 mode with Unicode properties) - an escape such as \d that matches a single character - a character class - a back reference (see next section) - a parenthesized subpattern (unless it is an assertion) - - The general repetition quantifier specifies a minimum and maximum num- - ber of permitted matches, by giving the two numbers in curly brackets - (braces), separated by a comma. The numbers must be less than 65536, - and the first must be less than or equal to the second. For example: - - z{2,4} - - matches "zz", "zzz", or "zzzz". A closing brace on its own is not a - special character. If the second number is omitted, but the comma is - present, there is no upper limit; if the second number and the comma - are both omitted, the quantifier specifies an exact number of required - matches. Thus - - [aeiou]{3,} - - matches at least 3 successive vowels, but may match many more, while - - \d{8} - - matches exactly 8 digits. An opening curly bracket that appears in a - position where a quantifier is not allowed, or one that does not match - the syntax of a quantifier, is taken as a literal character. For exam- - ple, {,6} is not a quantifier, but a literal string of four characters. - - In UTF-8 mode, quantifiers apply to UTF-8 characters rather than to - individual bytes. Thus, for example, \x{100}{2} matches two UTF-8 char- - acters, each of which is represented by a two-byte sequence. Similarly, - when Unicode property support is available, \X{3} matches three Unicode - extended sequences, each of which may be several bytes long (and they - may be of different lengths). - - The quantifier {0} is permitted, causing the expression to behave as if - the previous item and the quantifier were not present. - - For convenience (and historical compatibility) the three most common - quantifiers have single-character abbreviations: - - * is equivalent to {0,} - + is equivalent to {1,} - ? is equivalent to {0,1} - - It is possible to construct infinite loops by following a subpattern - that can match no characters with a quantifier that has no upper limit, - for example: - - (a?)* - - Earlier versions of Perl and PCRE used to give an error at compile time - for such patterns. However, because there are cases where this can be - useful, such patterns are now accepted, but if any repetition of the - subpattern does in fact match no characters, the loop is forcibly bro- - ken. - - By default, the quantifiers are "greedy", that is, they match as much - as possible (up to the maximum number of permitted times), without - causing the rest of the pattern to fail. The classic example of where - this gives problems is in trying to match comments in C programs. These - appear between /* and */ and within the comment, individual * and / - characters may appear. An attempt to match C comments by applying the - pattern - - /\*.*\*/ - - to the string - - /* first comment */ not comment /* second comment */ - - fails, because it matches the entire string owing to the greediness of - the .* item. - - However, if a quantifier is followed by a question mark, it ceases to - be greedy, and instead matches the minimum number of times possible, so - the pattern - - /\*.*?\*/ - - does the right thing with the C comments. The meaning of the various - quantifiers is not otherwise changed, just the preferred number of - matches. Do not confuse this use of question mark with its use as a - quantifier in its own right. Because it has two uses, it can sometimes - appear doubled, as in - - \d??\d - - which matches one digit by preference, but can match two if that is the - only way the rest of the pattern matches. - - If the PCRE_UNGREEDY option is set (an option which is not available in - Perl), the quantifiers are not greedy by default, but individual ones - can be made greedy by following them with a question mark. In other - words, it inverts the default behaviour. - - When a parenthesized subpattern is quantified with a minimum repeat - count that is greater than 1 or with a limited maximum, more memory is - required for the compiled pattern, in proportion to the size of the - minimum or maximum. - - If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equiv- - alent to Perl's /s) is set, thus allowing the . to match newlines, the - pattern is implicitly anchored, because whatever follows will be tried - against every character position in the subject string, so there is no - point in retrying the overall match at any position after the first. - PCRE normally treats such a pattern as though it were preceded by \A. - - In cases where it is known that the subject string contains no new- - lines, it is worth setting PCRE_DOTALL in order to obtain this opti- - mization, or alternatively using ^ to indicate anchoring explicitly. - - However, there is one situation where the optimization cannot be used. - When .* is inside capturing parentheses that are the subject of a - backreference elsewhere in the pattern, a match at the start may fail, - and a later one succeed. Consider, for example: - - (.*)abc\1 - - If the subject is "xyz123abc123" the match point is the fourth charac- - ter. For this reason, such a pattern is not implicitly anchored. - - When a capturing subpattern is repeated, the value captured is the sub- - string that matched the final iteration. For example, after - - (tweedle[dume]{3}\s*)+ - - has matched "tweedledum tweedledee" the value of the captured substring - is "tweedledee". However, if there are nested capturing subpatterns, - the corresponding captured values may have been set in previous itera- - tions. For example, after - - /(a|(b))+/ - - matches "aba" the value of the second captured substring is "b". - - -ATOMIC GROUPING AND POSSESSIVE QUANTIFIERS - - With both maximizing and minimizing repetition, failure of what follows - normally causes the repeated item to be re-evaluated to see if a dif- - ferent number of repeats allows the rest of the pattern to match. Some- - times it is useful to prevent this, either to change the nature of the - match, or to cause it fail earlier than it otherwise might, when the - author of the pattern knows there is no point in carrying on. - - Consider, for example, the pattern \d+foo when applied to the subject - line - - 123456bar - - After matching all 6 digits and then failing to match "foo", the normal - action of the matcher is to try again with only 5 digits matching the - \d+ item, and then with 4, and so on, before ultimately failing. - "Atomic grouping" (a term taken from Jeffrey Friedl's book) provides - the means for specifying that once a subpattern has matched, it is not - to be re-evaluated in this way. - - If we use atomic grouping for the previous example, the matcher would - give up immediately on failing to match "foo" the first time. The nota- - tion is a kind of special parenthesis, starting with (?> as in this - example: - - (?>\d+)foo - - This kind of parenthesis "locks up" the part of the pattern it con- - tains once it has matched, and a failure further into the pattern is - prevented from backtracking into it. Backtracking past it to previous - items, however, works as normal. - - An alternative description is that a subpattern of this type matches - the string of characters that an identical standalone pattern would - match, if anchored at the current point in the subject string. - - Atomic grouping subpatterns are not capturing subpatterns. Simple cases - such as the above example can be thought of as a maximizing repeat that - must swallow everything it can. So, while both \d+ and \d+? are pre- - pared to adjust the number of digits they match in order to make the - rest of the pattern match, (?>\d+) can only match an entire sequence of - digits. - - Atomic groups in general can of course contain arbitrarily complicated - subpatterns, and can be nested. However, when the subpattern for an - atomic group is just a single repeated item, as in the example above, a - simpler notation, called a "possessive quantifier" can be used. This - consists of an additional + character following a quantifier. Using - this notation, the previous example can be rewritten as - - \d++foo - - Possessive quantifiers are always greedy; the setting of the - PCRE_UNGREEDY option is ignored. They are a convenient notation for the - simpler forms of atomic group. However, there is no difference in the - meaning or processing of a possessive quantifier and the equivalent - atomic group. - - The possessive quantifier syntax is an extension to the Perl syntax. - Jeffrey Friedl originated the idea (and the name) in the first edition - of his book. Mike McCloskey liked it, so implemented it when he built - Sun's Java package, and PCRE copied it from there. - - When a pattern contains an unlimited repeat inside a subpattern that - can itself be repeated an unlimited number of times, the use of an - atomic group is the only way to avoid some failing matches taking a - very long time indeed. The pattern - - (\D+|<\d+>)*[!?] - - matches an unlimited number of substrings that either consist of non- - digits, or digits enclosed in <>, followed by either ! or ?. When it - matches, it runs quickly. However, if it is applied to - - aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa - - it takes a long time before reporting failure. This is because the - string can be divided between the internal \D+ repeat and the external - * repeat in a large number of ways, and all have to be tried. (The - example uses [!?] rather than a single character at the end, because - both PCRE and Perl have an optimization that allows for fast failure - when a single character is used. They remember the last single charac- - ter that is required for a match, and fail early if it is not present - in the string.) If the pattern is changed so that it uses an atomic - group, like this: - - ((?>\D+)|<\d+>)*[!?] - - sequences of non-digits cannot be broken, and failure happens quickly. - - -BACK REFERENCES - - Outside a character class, a backslash followed by a digit greater than - 0 (and possibly further digits) is a back reference to a capturing sub- - pattern earlier (that is, to its left) in the pattern, provided there - have been that many previous capturing left parentheses. - - However, if the decimal number following the backslash is less than 10, - it is always taken as a back reference, and causes an error only if - there are not that many capturing left parentheses in the entire pat- - tern. In other words, the parentheses that are referenced need not be - to the left of the reference for numbers less than 10. A "forward back - reference" of this type can make sense when a repetition is involved - and the subpattern to the right has participated in an earlier itera- - tion. - - It is not possible to have a numerical "forward back reference" to sub- - pattern whose number is 10 or more. However, a back reference to any - subpattern is possible using named parentheses (see below). See also - the subsection entitled "Non-printing characters" above for further - details of the handling of digits following a backslash. - - A back reference matches whatever actually matched the capturing sub- - pattern in the current subject string, rather than anything matching - the subpattern itself (see "Subpatterns as subroutines" below for a way - of doing that). So the pattern - - (sens|respons)e and \1ibility - - matches "sense and sensibility" and "response and responsibility", but - not "sense and responsibility". If caseful matching is in force at the - time of the back reference, the case of letters is relevant. For exam- - ple, - - ((?i)rah)\s+\1 - - matches "rah rah" and "RAH RAH", but not "RAH rah", even though the - original capturing subpattern is matched caselessly. - - Back references to named subpatterns use the Python syntax (?P=name). - We could rewrite the above example as follows: - - (?P<p1>(?i)rah)\s+(?P=p1) - - A subpattern that is referenced by name may appear in the pattern - before or after the reference. - - There may be more than one back reference to the same subpattern. If a - subpattern has not actually been used in a particular match, any back - references to it always fail. For example, the pattern - - (a|(bc))\2 - - always fails if it starts to match "a" rather than "bc". Because there - may be many capturing parentheses in a pattern, all digits following - the backslash are taken as part of a potential back reference number. - If the pattern continues with a digit character, some delimiter must be - used to terminate the back reference. If the PCRE_EXTENDED option is - set, this can be whitespace. Otherwise an empty comment (see "Com- - ments" below) can be used. - - A back reference that occurs inside the parentheses to which it refers - fails when the subpattern is first used, so, for example, (a\1) never - matches. However, such references can be useful inside repeated sub- - patterns. For example, the pattern - - (a|b\1)+ - - matches any number of "a"s and also "aba", "ababbaa" etc. At each iter- - ation of the subpattern, the back reference matches the character - string corresponding to the previous iteration. In order for this to - work, the pattern must be such that the first iteration does not need - to match the back reference. This can be done using alternation, as in - the example above, or by a quantifier with a minimum of zero. - - -ASSERTIONS - - An assertion is a test on the characters following or preceding the - current matching point that does not actually consume any characters. - The simple assertions coded as \b, \B, \A, \G, \Z, \z, ^ and $ are - described above. - - More complicated assertions are coded as subpatterns. There are two - kinds: those that look ahead of the current position in the subject - string, and those that look behind it. An assertion subpattern is - matched in the normal way, except that it does not cause the current - matching position to be changed. - - Assertion subpatterns are not capturing subpatterns, and may not be - repeated, because it makes no sense to assert the same thing several - times. If any kind of assertion contains capturing subpatterns within - it, these are counted for the purposes of numbering the capturing sub- - patterns in the whole pattern. However, substring capturing is carried - out only for positive assertions, because it does not make sense for - negative assertions. - - Lookahead assertions - - Lookahead assertions start with (?= for positive assertions and (?! for - negative assertions. For example, - - \w+(?=;) - - matches a word followed by a semicolon, but does not include the semi- - colon in the match, and - - foo(?!bar) - - matches any occurrence of "foo" that is not followed by "bar". Note - that the apparently similar pattern - - (?!foo)bar - - does not find an occurrence of "bar" that is preceded by something - other than "foo"; it finds any occurrence of "bar" whatsoever, because - the assertion (?!foo) is always true when the next three characters are - "bar". A lookbehind assertion is needed to achieve the other effect. - - If you want to force a matching failure at some point in a pattern, the - most convenient way to do it is with (?!) because an empty string - always matches, so an assertion that requires there not to be an empty - string must always fail. - - Lookbehind assertions - - Lookbehind assertions start with (?<= for positive assertions and (?<! - for negative assertions. For example, - - (?<!foo)bar - - does find an occurrence of "bar" that is not preceded by "foo". The - contents of a lookbehind assertion are restricted such that all the - strings it matches must have a fixed length. However, if there are sev- - eral top-level alternatives, they do not all have to have the same - fixed length. Thus - - (?<=bullock|donkey) - - is permitted, but - - (?<!dogs?|cats?) - - causes an error at compile time. Branches that match different length - strings are permitted only at the top level of a lookbehind assertion. - This is an extension compared with Perl (at least for 5.8), which - requires all branches to match the same length of string. An assertion - such as - - (?<=ab(c|de)) - - is not permitted, because its single top-level branch can match two - different lengths, but it is acceptable if rewritten to use two top- - level branches: - - (?<=abc|abde) - - The implementation of lookbehind assertions is, for each alternative, - to temporarily move the current position back by the fixed width and - then try to match. If there are insufficient characters before the cur- - rent position, the match is deemed to fail. - - PCRE does not allow the \C escape (which matches a single byte in UTF-8 - mode) to appear in lookbehind assertions, because it makes it impossi- - ble to calculate the length of the lookbehind. The \X escape, which can - match different numbers of bytes, is also not permitted. - - Atomic groups can be used in conjunction with lookbehind assertions to - specify efficient matching at the end of the subject string. Consider a - simple pattern such as - - abcd$ - - when applied to a long string that does not match. Because matching - proceeds from left to right, PCRE will look for each "a" in the subject - and then see if what follows matches the rest of the pattern. If the - pattern is specified as - - ^.*abcd$ - - the initial .* matches the entire string at first, but when this fails - (because there is no following "a"), it backtracks to match all but the - last character, then all but the last two characters, and so on. Once - again the search for "a" covers the entire string, from right to left, - so we are no better off. However, if the pattern is written as - - ^(?>.*)(?<=abcd) - - or, equivalently, using the possessive quantifier syntax, - - ^.*+(?<=abcd) - - there can be no backtracking for the .* item; it can match only the - entire string. The subsequent lookbehind assertion does a single test - on the last four characters. If it fails, the match fails immediately. - For long strings, this approach makes a significant difference to the - processing time. - - Using multiple assertions - - Several assertions (of any sort) may occur in succession. For example, - - (?<=\d{3})(?<!999)foo - - matches "foo" preceded by three digits that are not "999". Notice that - each of the assertions is applied independently at the same point in - the subject string. First there is a check that the previous three - characters are all digits, and then there is a check that the same - three characters are not "999". This pattern does not match "foo" pre- - ceded by six characters, the first of which are digits and the last - three of which are not "999". For example, it doesn't match "123abc- - foo". A pattern to do that is - - (?<=\d{3}...)(?<!999)foo - - This time the first assertion looks at the preceding six characters, - checking that the first three are digits, and then the second assertion - checks that the preceding three characters are not "999". - - Assertions can be nested in any combination. For example, - - (?<=(?<!foo)bar)baz - - matches an occurrence of "baz" that is preceded by "bar" which in turn - is not preceded by "foo", while - - (?<=\d{3}(?!999)...)foo - - is another pattern that matches "foo" preceded by three digits and any - three characters that are not "999". - - -CONDITIONAL SUBPATTERNS - - It is possible to cause the matching process to obey a subpattern con- - ditionally or to choose between two alternative subpatterns, depending - on the result of an assertion, or whether a previous capturing subpat- - tern matched or not. The two possible forms of conditional subpattern - are - - (?(condition)yes-pattern) - (?(condition)yes-pattern|no-pattern) - - If the condition is satisfied, the yes-pattern is used; otherwise the - no-pattern (if present) is used. If there are more than two alterna- - tives in the subpattern, a compile-time error occurs. - - There are three kinds of condition. If the text between the parentheses - consists of a sequence of digits, or a sequence of alphanumeric charac- - ters and underscores, the condition is satisfied if the capturing sub- - pattern of that number or name has previously matched. There is a pos- - sible ambiguity here, because subpattern names may consist entirely of - digits. PCRE looks first for a named subpattern; if it cannot find one - and the text consists entirely of digits, it looks for a subpattern of - that number, which must be greater than zero. Using subpattern names - that consist entirely of digits is not recommended. - - Consider the following pattern, which contains non-significant white - space to make it more readable (assume the PCRE_EXTENDED option) and to - divide it into three parts for ease of discussion: - - ( \( )? [^()]+ (?(1) \) ) - - The first part matches an optional opening parenthesis, and if that - character is present, sets it as the first captured substring. The sec- - ond part matches one or more characters that are not parentheses. The - third part is a conditional subpattern that tests whether the first set - of parentheses matched or not. If they did, that is, if subject started - with an opening parenthesis, the condition is true, and so the yes-pat- - tern is executed and a closing parenthesis is required. Otherwise, - since no-pattern is not present, the subpattern matches nothing. In - other words, this pattern matches a sequence of non-parentheses, - optionally enclosed in parentheses. Rewriting it to use a named subpat- - tern gives this: - - (?P<OPEN> \( )? [^()]+ (?(OPEN) \) ) - - If the condition is the string (R), and there is no subpattern with the - name R, the condition is satisfied if a recursive call to the pattern - or subpattern has been made. At "top level", the condition is false. - This is a PCRE extension. Recursive patterns are described in the next - section. - - If the condition is not a sequence of digits or (R), it must be an - assertion. This may be a positive or negative lookahead or lookbehind - assertion. Consider this pattern, again containing non-significant - white space, and with the two alternatives on the second line: - - (?(?=[^a-z]*[a-z]) - \d{2}-[a-z]{3}-\d{2} | \d{2}-\d{2}-\d{2} ) - - The condition is a positive lookahead assertion that matches an - optional sequence of non-letters followed by a letter. In other words, - it tests for the presence of at least one letter in the subject. If a - letter is found, the subject is matched against the first alternative; - otherwise it is matched against the second. This pattern matches - strings in one of the two forms dd-aaa-dd or dd-dd-dd, where aaa are - letters and dd are digits. - - -COMMENTS - - The sequence (?# marks the start of a comment that continues up to the - next closing parenthesis. Nested parentheses are not permitted. The - characters that make up a comment play no part in the pattern matching - at all. - - If the PCRE_EXTENDED option is set, an unescaped # character outside a - character class introduces a comment that continues to immediately - after the next newline in the pattern. - - -RECURSIVE PATTERNS - - Consider the problem of matching a string in parentheses, allowing for - unlimited nested parentheses. Without the use of recursion, the best - that can be done is to use a pattern that matches up to some fixed - depth of nesting. It is not possible to handle an arbitrary nesting - depth. Perl provides a facility that allows regular expressions to - recurse (amongst other things). It does this by interpolating Perl code - in the expression at run time, and the code can refer to the expression - itself. A Perl pattern to solve the parentheses problem can be created - like this: - - $re = qr{\( (?: (?>[^()]+) | (?p{$re}) )* \)}x; - - The (?p{...}) item interpolates Perl code at run time, and in this case - refers recursively to the pattern in which it appears. Obviously, PCRE - cannot support the interpolation of Perl code. Instead, it supports - some special syntax for recursion of the entire pattern, and also for - individual subpattern recursion. - - The special item that consists of (? followed by a number greater than - zero and a closing parenthesis is a recursive call of the subpattern of - the given number, provided that it occurs inside that subpattern. (If - not, it is a "subroutine" call, which is described in the next sec- - tion.) The special item (?R) is a recursive call of the entire regular - expression. - - A recursive subpattern call is always treated as an atomic group. That - is, once it has matched some of the subject string, it is never re- - entered, even if it contains untried alternatives and there is a subse- - quent matching failure. - - This PCRE pattern solves the nested parentheses problem (assume the - PCRE_EXTENDED option is set so that white space is ignored): - - \( ( (?>[^()]+) | (?R) )* \) - - First it matches an opening parenthesis. Then it matches any number of - substrings which can either be a sequence of non-parentheses, or a - recursive match of the pattern itself (that is, a correctly parenthe- - sized substring). Finally there is a closing parenthesis. - - If this were part of a larger pattern, you would not want to recurse - the entire pattern, so instead you could use this: - - ( \( ( (?>[^()]+) | (?1) )* \) ) - - We have put the pattern into parentheses, and caused the recursion to - refer to them instead of the whole pattern. In a larger pattern, keep- - ing track of parenthesis numbers can be tricky. It may be more conve- - nient to use named parentheses instead. For this, PCRE uses (?P>name), - which is an extension to the Python syntax that PCRE uses for named - parentheses (Perl does not provide named parentheses). We could rewrite - the above example as follows: - - (?P<pn> \( ( (?>[^()]+) | (?P>pn) )* \) ) - - This particular example pattern contains nested unlimited repeats, and - so the use of atomic grouping for matching strings of non-parentheses - is important when applying the pattern to strings that do not match. - For example, when this pattern is applied to - - (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa() - - it yields "no match" quickly. However, if atomic grouping is not used, - the match runs for a very long time indeed because there are so many - different ways the + and * repeats can carve up the subject, and all - have to be tested before failure can be reported. - - At the end of a match, the values set for any capturing subpatterns are - those from the outermost level of the recursion at which the subpattern - value is set. If you want to obtain intermediate values, a callout - function can be used (see the next section and the pcrecallout documen- - tation). If the pattern above is matched against - - (ab(cd)ef) - - the value for the capturing parentheses is "ef", which is the last - value taken on at the top level. If additional parentheses are added, - giving - - \( ( ( (?>[^()]+) | (?R) )* ) \) - ^ ^ - ^ ^ - - the string they capture is "ab(cd)ef", the contents of the top level - parentheses. If there are more than 15 capturing parentheses in a pat- - tern, PCRE has to obtain extra memory to store data during a recursion, - which it does by using pcre_malloc, freeing it via pcre_free after- - wards. If no memory can be obtained, the match fails with the - PCRE_ERROR_NOMEMORY error. - - Do not confuse the (?R) item with the condition (R), which tests for - recursion. Consider this pattern, which matches text in angle brack- - ets, allowing for arbitrary nesting. Only digits are allowed in nested - brackets (that is, when recursing), whereas any characters are permit- - ted at the outer level. - - < (?: (?(R) \d++ | [^<>]*+) | (?R)) * > - - In this pattern, (?(R) is the start of a conditional subpattern, with - two different alternatives for the recursive and non-recursive cases. - The (?R) item is the actual recursive call. - - -SUBPATTERNS AS SUBROUTINES - - If the syntax for a recursive subpattern reference (either by number or - by name) is used outside the parentheses to which it refers, it oper- - ates like a subroutine in a programming language. An earlier example - pointed out that the pattern - - (sens|respons)e and \1ibility - - matches "sense and sensibility" and "response and responsibility", but - not "sense and responsibility". If instead the pattern - - (sens|respons)e and (?1)ibility - - is used, it does match "sense and responsibility" as well as the other - two strings. Such references, if given numerically, must follow the - subpattern to which they refer. However, named references can refer to - later subpatterns. - - Like recursive subpatterns, a "subroutine" call is always treated as an - atomic group. That is, once it has matched some of the subject string, - it is never re-entered, even if it contains untried alternatives and - there is a subsequent matching failure. - - -CALLOUTS - - Perl has a feature whereby using the sequence (?{...}) causes arbitrary - Perl code to be obeyed in the middle of matching a regular expression. - This makes it possible, amongst other things, to extract different sub- - strings that match the same pair of parentheses when there is a repeti- - tion. - - PCRE provides a similar feature, but of course it cannot obey arbitrary - Perl code. The feature is called "callout". The caller of PCRE provides - an external function by putting its entry point in the global variable - pcre_callout. By default, this variable contains NULL, which disables - all calling out. - - Within a regular expression, (?C) indicates the points at which the - external function is to be called. If you want to identify different - callout points, you can put a number less than 256 after the letter C. - The default value is zero. For example, this pattern has two callout - points: - - (?C1)abc(?C2)def - - If the PCRE_AUTO_CALLOUT flag is passed to pcre_compile(), callouts are - automatically installed before each item in the pattern. They are all - numbered 255. - - During matching, when PCRE reaches a callout point (and pcre_callout is - set), the external function is called. It is provided with the number - of the callout, the position in the pattern, and, optionally, one item - of data originally supplied by the caller of pcre_exec(). The callout - function may cause matching to proceed, to backtrack, or to fail alto- - gether. A complete description of the interface to the callout function - is given in the pcrecallout documentation. - -Last updated: 06 June 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - -PCREPARTIAL(3) PCREPARTIAL(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -PARTIAL MATCHING IN PCRE - - In normal use of PCRE, if the subject string that is passed to - pcre_exec() or pcre_dfa_exec() matches as far as it goes, but is too - short to match the entire pattern, PCRE_ERROR_NOMATCH is returned. - There are circumstances where it might be helpful to distinguish this - case from other cases in which there is no match. - - Consider, for example, an application where a human is required to type - in data for a field with specific formatting requirements. An example - might be a date in the form ddmmmyy, defined by this pattern: - - ^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$ - - If the application sees the user's keystrokes one by one, and can check - that what has been typed so far is potentially valid, it is able to - raise an error as soon as a mistake is made, possibly beeping and not - reflecting the character that has been typed. This immediate feedback - is likely to be a better user interface than a check that is delayed - until the entire string has been entered. - - PCRE supports the concept of partial matching by means of the PCRE_PAR- - TIAL option, which can be set when calling pcre_exec() or - pcre_dfa_exec(). When this flag is set for pcre_exec(), the return code - PCRE_ERROR_NOMATCH is converted into PCRE_ERROR_PARTIAL if at any time - during the matching process the last part of the subject string matched - part of the pattern. Unfortunately, for non-anchored matching, it is - not possible to obtain the position of the start of the partial match. - No captured data is set when PCRE_ERROR_PARTIAL is returned. - - When PCRE_PARTIAL is set for pcre_dfa_exec(), the return code - PCRE_ERROR_NOMATCH is converted into PCRE_ERROR_PARTIAL if the end of - the subject is reached, there have been no complete matches, but there - is still at least one matching possibility. The portion of the string - that provided the partial match is set as the first matching string. - - Using PCRE_PARTIAL disables one of PCRE's optimizations. PCRE remembers - the last literal byte in a pattern, and abandons matching immediately - if such a byte is not present in the subject string. This optimization - cannot be used for a subject string that might match only partially. - - -RESTRICTED PATTERNS FOR PCRE_PARTIAL - - Because of the way certain internal optimizations are implemented in - the pcre_exec() function, the PCRE_PARTIAL option cannot be used with - all patterns. These restrictions do not apply when pcre_dfa_exec() is - used. For pcre_exec(), repeated single characters such as - - a{2,4} - - and repeated single metasequences such as - - \d+ - - are not permitted if the maximum number of occurrences is greater than - one. Optional items such as \d? (where the maximum is one) are permit- - ted. Quantifiers with any values are permitted after parentheses, so - the invalid examples above can be coded thus: - - (a){2,4} - (\d)+ - - These constructions run more slowly, but for the kinds of application - that are envisaged for this facility, this is not felt to be a major - restriction. - - If PCRE_PARTIAL is set for a pattern that does not conform to the - restrictions, pcre_exec() returns the error code PCRE_ERROR_BADPARTIAL - (-13). - - -EXAMPLE OF PARTIAL MATCHING USING PCRETEST - - If the escape sequence \P is present in a pcretest data line, the - PCRE_PARTIAL flag is used for the match. Here is a run of pcretest that - uses the date example quoted above: - - re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/ - data> 25jun04\P - 0: 25jun04 - 1: jun - data> 25dec3\P - Partial match - data> 3ju\P - Partial match - data> 3juj\P - No match - data> j\P - No match - - The first data string is matched completely, so pcretest shows the - matched substrings. The remaining four strings do not match the com- - plete pattern, but the first two are partial matches. The same test, - using DFA matching (by means of the \D escape sequence), produces the - following output: - - re> /^?(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)$/ - data> 25jun04\P\D - 0: 25jun04 - data> 23dec3\P\D - Partial match: 23dec3 - data> 3ju\P\D - Partial match: 3ju - data> 3juj\P\D - No match - data> j\P\D - No match - - Notice that in this case the portion of the string that was matched is - made available. - - -MULTI-SEGMENT MATCHING WITH pcre_dfa_exec() - - When a partial match has been found using pcre_dfa_exec(), it is possi- - ble to continue the match by providing additional subject data and - calling pcre_dfa_exec() again with the PCRE_DFA_RESTART option and the - same working space (where details of the previous partial match are - stored). Here is an example using pcretest, where the \R escape - sequence sets the PCRE_DFA_RESTART option and the \D escape sequence - requests the use of pcre_dfa_exec(): - - re> /^?(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)$/ - data> 23ja\P\D - Partial match: 23ja - data> n05\R\D - 0: n05 - - The first call has "23ja" as the subject, and requests partial match- - ing; the second call has "n05" as the subject for the continued - (restarted) match. Notice that when the match is complete, only the - last part is shown; PCRE does not retain the previously partially- - matched string. It is up to the calling program to do that if it needs - to. - - This facility can be used to pass very long subject strings to - pcre_dfa_exec(). However, some care is needed for certain types of pat- - tern. - - 1. If the pattern contains tests for the beginning or end of a line, - you need to pass the PCRE_NOTBOL or PCRE_NOTEOL options, as appropri- - ate, when the subject string for any call does not contain the begin- - ning or end of a line. - - 2. If the pattern contains backward assertions (including \b or \B), - you need to arrange for some overlap in the subject strings to allow - for this. For example, you could pass the subject in chunks that were - 500 bytes long, but in a buffer of 700 bytes, with the starting offset - set to 200 and the previous 200 bytes at the start of the buffer. - - 3. Matching a subject string that is split into multiple segments does - not always produce exactly the same result as matching over one single - long string. The difference arises when there are multiple matching - possibilities, because a partial match result is given only when there - are no completed matches in a call to fBpcre_dfa_exec(). This means - that as soon as the shortest match has been found, continuation to a - new subject segment is no longer possible. Consider this pcretest - example: - - re> /dog(sbody)?/ - data> do\P\D - Partial match: do - data> gsb\R\P\D - 0: g - data> dogsbody\D - 0: dogsbody - 1: dog - - The pattern matches the words "dog" or "dogsbody". When the subject is - presented in several parts ("do" and "gsb" being the first two) the - match stops when "dog" has been found, and it is not possible to con- - tinue. On the other hand, if "dogsbody" is presented as a single - string, both matches are found. - - Because of this phenomenon, it does not usually make sense to end a - pattern that is going to be matched in this way with a variable repeat. - - 4. Patterns that contain alternatives at the top level which do not all - start with the same pattern item may not work as expected. For example, - consider this pattern: - - 1234|3789 - - If the first part of the subject is "ABC123", a partial match of the - first alternative is found at offset 3. There is no partial match for - the second alternative, because such a match does not start at the same - point in the subject string. Attempting to continue with the string - "789" does not yield a match because only those alternatives that match - at one point in the subject are remembered. The problem arises because - the start of the second alternative matches within the first alterna- - tive. There is no problem with anchored patterns or patterns such as: - - 1234|ABCD - - where no string can be a partial match for both alternatives. - -Last updated: 16 January 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - -PCREPRECOMPILE(3) PCREPRECOMPILE(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -SAVING AND RE-USING PRECOMPILED PCRE PATTERNS - - If you are running an application that uses a large number of regular - expression patterns, it may be useful to store them in a precompiled - form instead of having to compile them every time the application is - run. If you are not using any private character tables (see the - pcre_maketables() documentation), this is relatively straightforward. - If you are using private tables, it is a little bit more complicated. - - If you save compiled patterns to a file, you can copy them to a differ- - ent host and run them there. This works even if the new host has the - opposite endianness to the one on which the patterns were compiled. - There may be a small performance penalty, but it should be insignifi- - cant. - - -SAVING A COMPILED PATTERN - The value returned by pcre_compile() points to a single block of memory - that holds the compiled pattern and associated data. You can find the - length of this block in bytes by calling pcre_fullinfo() with an argu- - ment of PCRE_INFO_SIZE. You can then save the data in any appropriate - manner. Here is sample code that compiles a pattern and writes it to a - file. It assumes that the variable fd refers to a file that is open for - output: - - int erroroffset, rc, size; - char *error; - pcre *re; - - re = pcre_compile("my pattern", 0, &error, &erroroffset, NULL); - if (re == NULL) { ... handle errors ... } - rc = pcre_fullinfo(re, NULL, PCRE_INFO_SIZE, &size); - if (rc < 0) { ... handle errors ... } - rc = fwrite(re, 1, size, fd); - if (rc != size) { ... handle errors ... } - - In this example, the bytes that comprise the compiled pattern are - copied exactly. Note that this is binary data that may contain any of - the 256 possible byte values. On systems that make a distinction - between binary and non-binary data, be sure that the file is opened for - binary output. - - If you want to write more than one pattern to a file, you will have to - devise a way of separating them. For binary data, preceding each pat- - tern with its length is probably the most straightforward approach. - Another possibility is to write out the data in hexadecimal instead of - binary, one pattern to a line. - - Saving compiled patterns in a file is only one possible way of storing - them for later use. They could equally well be saved in a database, or - in the memory of some daemon process that passes them via sockets to - the processes that want them. - - If the pattern has been studied, it is also possible to save the study - data in a similar way to the compiled pattern itself. When studying - generates additional information, pcre_study() returns a pointer to a - pcre_extra data block. Its format is defined in the section on matching - a pattern in the pcreapi documentation. The study_data field points to - the binary study data, and this is what you must save (not the - pcre_extra block itself). The length of the study data can be obtained - by calling pcre_fullinfo() with an argument of PCRE_INFO_STUDYSIZE. - Remember to check that pcre_study() did return a non-NULL value before - trying to save the study data. - - -RE-USING A PRECOMPILED PATTERN - - Re-using a precompiled pattern is straightforward. Having reloaded it - into main memory, you pass its pointer to pcre_exec() or - pcre_dfa_exec() in the usual way. This should work even on another - host, and even if that host has the opposite endianness to the one - where the pattern was compiled. - - However, if you passed a pointer to custom character tables when the - pattern was compiled (the tableptr argument of pcre_compile()), you - must now pass a similar pointer to pcre_exec() or pcre_dfa_exec(), - because the value saved with the compiled pattern will obviously be - nonsense. A field in a pcre_extra() block is used to pass this data, as - described in the section on matching a pattern in the pcreapi documen- - tation. - - If you did not provide custom character tables when the pattern was - compiled, the pointer in the compiled pattern is NULL, which causes - pcre_exec() to use PCRE's internal tables. Thus, you do not need to - take any special action at run time in this case. - - If you saved study data with the compiled pattern, you need to create - your own pcre_extra data block and set the study_data field to point to - the reloaded study data. You must also set the PCRE_EXTRA_STUDY_DATA - bit in the flags field to indicate that study data is present. Then - pass the pcre_extra block to pcre_exec() or pcre_dfa_exec() in the - usual way. - - -COMPATIBILITY WITH DIFFERENT PCRE RELEASES - - The layout of the control block that is at the start of the data that - makes up a compiled pattern was changed for release 5.0. If you have - any saved patterns that were compiled with previous releases (not a - facility that was previously advertised), you will have to recompile - them for release 5.0. However, from now on, it should be possible to - make changes in a compatible manner. - - Notwithstanding the above, if you have any saved patterns in UTF-8 mode - that use \p or \P that were compiled with any release up to and includ- - ing 6.4, you will have to recompile them for release 6.5 and above. - -Last updated: 01 February 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - -PCREPERFORM(3) PCREPERFORM(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -PCRE PERFORMANCE - - Certain items that may appear in regular expression patterns are more - efficient than others. It is more efficient to use a character class - like [aeiou] than a set of alternatives such as (a|e|i|o|u). In gen- - eral, the simplest construction that provides the required behaviour is - usually the most efficient. Jeffrey Friedl's book contains a lot of - useful general discussion about optimizing regular expressions for - efficient performance. This document contains a few observations about - PCRE. - - Using Unicode character properties (the \p, \P, and \X escapes) is - slow, because PCRE has to scan a structure that contains data for over - fifteen thousand characters whenever it needs a character's property. - If you can find an alternative pattern that does not use character - properties, it will probably be faster. - - When a pattern begins with .* not in parentheses, or in parentheses - that are not the subject of a backreference, and the PCRE_DOTALL option - is set, the pattern is implicitly anchored by PCRE, since it can match - only at the start of a subject string. However, if PCRE_DOTALL is not - set, PCRE cannot make this optimization, because the . metacharacter - does not then match a newline, and if the subject string contains new- - lines, the pattern may match from the character immediately following - one of them instead of from the very start. For example, the pattern - - .*second - - matches the subject "first\nand second" (where \n stands for a newline - character), with the match starting at the seventh character. In order - to do this, PCRE has to retry the match starting after every newline in - the subject. - - If you are using such a pattern with subject strings that do not con- - tain newlines, the best performance is obtained by setting PCRE_DOTALL, - or starting the pattern with ^.* or ^.*? to indicate explicit anchor- - ing. That saves PCRE from having to scan along the subject looking for - a newline to restart at. - - Beware of patterns that contain nested indefinite repeats. These can - take a long time to run when applied to a string that does not match. - Consider the pattern fragment - - (a+)* - - This can match "aaaa" in 33 different ways, and this number increases - very rapidly as the string gets longer. (The * repeat can match 0, 1, - 2, 3, or 4 times, and for each of those cases other than 0, the + - repeats can match different numbers of times.) When the remainder of - the pattern is such that the entire match is going to fail, PCRE has in - principle to try every possible variation, and this can take an - extremely long time. - - An optimization catches some of the more simple cases such as - - (a+)*b - - where a literal character follows. Before embarking on the standard - matching procedure, PCRE checks that there is a "b" later in the sub- - ject string, and if there is not, it fails the match immediately. How- - ever, when there is no following literal this optimization cannot be - used. You can see the difference by comparing the behaviour of - - (a+)*\d - - with the pattern above. The former gives a failure almost instantly - when applied to a whole line of "a" characters, whereas the latter - takes an appreciable time with strings longer than about 20 characters. - - In many cases, the solution to this kind of performance issue is to use - an atomic group or a possessive quantifier. - -Last updated: 28 February 2005 -Copyright (c) 1997-2005 University of Cambridge. ------------------------------------------------------------------------------- - - -PCREPOSIX(3) PCREPOSIX(3) - - -NAME - PCRE - Perl-compatible regular expressions. - - -SYNOPSIS OF POSIX API - - #include <pcreposix.h> - - int regcomp(regex_t *preg, const char *pattern, - int cflags); - - int regexec(regex_t *preg, const char *string, - size_t nmatch, regmatch_t pmatch[], int eflags); - - size_t regerror(int errcode, const regex_t *preg, - char *errbuf, size_t errbuf_size); - - void regfree(regex_t *preg); - - -DESCRIPTION - - This set of functions provides a POSIX-style API to the PCRE regular - expression package. See the pcreapi documentation for a description of - PCRE's native API, which contains much additional functionality. - - The functions described here are just wrapper functions that ultimately - call the PCRE native API. Their prototypes are defined in the - pcreposix.h header file, and on Unix systems the library itself is - called pcreposix.a, so can be accessed by adding -lpcreposix to the - command for linking an application that uses them. Because the POSIX - functions call the native ones, it is also necessary to add -lpcre. - - I have implemented only those option bits that can be reasonably mapped - to PCRE native options. In addition, the option REG_EXTENDED is defined - with the value zero. This has no effect, but since programs that are - written to the POSIX interface often use it, this makes it easier to - slot in PCRE as a replacement library. Other POSIX options are not even - defined. - - When PCRE is called via these functions, it is only the API that is - POSIX-like in style. The syntax and semantics of the regular expres- - sions themselves are still those of Perl, subject to the setting of - various PCRE options, as described below. "POSIX-like in style" means - that the API approximates to the POSIX definition; it is not fully - POSIX-compatible, and in multi-byte encoding domains it is probably - even less compatible. - - The header for these functions is supplied as pcreposix.h to avoid any - potential clash with other POSIX libraries. It can, of course, be - renamed or aliased as regex.h, which is the "correct" name. It provides - two structure types, regex_t for compiled internal forms, and reg- - match_t for returning captured substrings. It also defines some con- - stants whose names start with "REG_"; these are used for setting - options and identifying error codes. - - -COMPILING A PATTERN - - The function regcomp() is called to compile a pattern into an internal - form. The pattern is a C string terminated by a binary zero, and is - passed in the argument pattern. The preg argument is a pointer to a - regex_t structure that is used as a base for storing information about - the compiled regular expression. - - The argument cflags is either zero, or contains one or more of the bits - defined by the following macros: - - REG_DOTALL - - The PCRE_DOTALL option is set when the regular expression is passed for - compilation to the native function. Note that REG_DOTALL is not part of - the POSIX standard. - - REG_ICASE - - The PCRE_CASELESS option is set when the regular expression is passed - for compilation to the native function. - - REG_NEWLINE - - The PCRE_MULTILINE option is set when the regular expression is passed - for compilation to the native function. Note that this does not mimic - the defined POSIX behaviour for REG_NEWLINE (see the following sec- - tion). - - REG_NOSUB - - The PCRE_NO_AUTO_CAPTURE option is set when the regular expression is - passed for compilation to the native function. In addition, when a pat- - tern that is compiled with this flag is passed to regexec() for match- - ing, the nmatch and pmatch arguments are ignored, and no captured - strings are returned. - - REG_UTF8 - - The PCRE_UTF8 option is set when the regular expression is passed for - compilation to the native function. This causes the pattern itself and - all data strings used for matching it to be treated as UTF-8 strings. - Note that REG_UTF8 is not part of the POSIX standard. - - In the absence of these flags, no options are passed to the native - function. This means the the regex is compiled with PCRE default - semantics. In particular, the way it handles newline characters in the - subject string is the Perl way, not the POSIX way. Note that setting - PCRE_MULTILINE has only some of the effects specified for REG_NEWLINE. - It does not affect the way newlines are matched by . (they aren't) or - by a negative class such as [^a] (they are). - - The yield of regcomp() is zero on success, and non-zero otherwise. The - preg structure is filled in on success, and one member of the structure - is public: re_nsub contains the number of capturing subpatterns in the - regular expression. Various error codes are defined in the header file. - - -MATCHING NEWLINE CHARACTERS - - This area is not simple, because POSIX and Perl take different views of - things. It is not possible to get PCRE to obey POSIX semantics, but - then PCRE was never intended to be a POSIX engine. The following table - lists the different possibilities for matching newline characters in - PCRE: - - Default Change with - - . matches newline no PCRE_DOTALL - newline matches [^a] yes not changeable - $ matches \n at end yes PCRE_DOLLARENDONLY - $ matches \n in middle no PCRE_MULTILINE - ^ matches \n in middle no PCRE_MULTILINE - - This is the equivalent table for POSIX: - - Default Change with - - . matches newline yes REG_NEWLINE - newline matches [^a] yes REG_NEWLINE - $ matches \n at end no REG_NEWLINE - $ matches \n in middle no REG_NEWLINE - ^ matches \n in middle no REG_NEWLINE - - PCRE's behaviour is the same as Perl's, except that there is no equiva- - lent for PCRE_DOLLAR_ENDONLY in Perl. In both PCRE and Perl, there is - no way to stop newline from matching [^a]. - - The default POSIX newline handling can be obtained by setting - PCRE_DOTALL and PCRE_DOLLAR_ENDONLY, but there is no way to make PCRE - behave exactly as for the REG_NEWLINE action. - - -MATCHING A PATTERN - - The function regexec() is called to match a compiled pattern preg - against a given string, which is terminated by a zero byte, subject to - the options in eflags. These can be: - - REG_NOTBOL - - The PCRE_NOTBOL option is set when calling the underlying PCRE matching - function. - - REG_NOTEOL - - The PCRE_NOTEOL option is set when calling the underlying PCRE matching - function. - - If the pattern was compiled with the REG_NOSUB flag, no data about any - matched strings is returned. The nmatch and pmatch arguments of - regexec() are ignored. - - Otherwise,the portion of the string that was matched, and also any cap- - tured substrings, are returned via the pmatch argument, which points to - an array of nmatch structures of type regmatch_t, containing the mem- - bers rm_so and rm_eo. These contain the offset to the first character - of each substring and the offset to the first character after the end - of each substring, respectively. The 0th element of the vector relates - to the entire portion of string that was matched; subsequent elements - relate to the capturing subpatterns of the regular expression. Unused - entries in the array have both structure members set to -1. - - A successful match yields a zero return; various error codes are - defined in the header file, of which REG_NOMATCH is the "expected" - failure code. - - -ERROR MESSAGES - - The regerror() function maps a non-zero errorcode from either regcomp() - or regexec() to a printable message. If preg is not NULL, the error - should have arisen from the use of that structure. A message terminated - by a binary zero is placed in errbuf. The length of the message, - including the zero, is limited to errbuf_size. The yield of the func- - tion is the size of buffer needed to hold the whole message. - - -MEMORY USAGE - - Compiling a regular expression causes memory to be allocated and asso- - ciated with the preg structure. The function regfree() frees all such - memory, after which preg may no longer be used as a compiled expres- - sion. - - -AUTHOR - - Philip Hazel - University Computing Service, - Cambridge CB2 3QG, England. - -Last updated: 16 January 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - -PCRECPP(3) PCRECPP(3) - - -NAME - PCRE - Perl-compatible regular expressions. - - -SYNOPSIS OF C++ WRAPPER - - #include <pcrecpp.h> - - -DESCRIPTION - - The C++ wrapper for PCRE was provided by Google Inc. Some additional - functionality was added by Giuseppe Maxia. This brief man page was con- - structed from the notes in the pcrecpp.h file, which should be con- - sulted for further details. - - -MATCHING INTERFACE - - The "FullMatch" operation checks that supplied text matches a supplied - pattern exactly. If pointer arguments are supplied, it copies matched - sub-strings that match sub-patterns into them. - - Example: successful match - pcrecpp::RE re("h.*o"); - re.FullMatch("hello"); - - Example: unsuccessful match (requires full match): - pcrecpp::RE re("e"); - !re.FullMatch("hello"); - - Example: creating a temporary RE object: - pcrecpp::RE("h.*o").FullMatch("hello"); - - You can pass in a "const char*" or a "string" for "text". The examples - below tend to use a const char*. You can, as in the different examples - above, store the RE object explicitly in a variable or use a temporary - RE object. The examples below use one mode or the other arbitrarily. - Either could correctly be used for any of these examples. - - You must supply extra pointer arguments to extract matched subpieces. - - Example: extracts "ruby" into "s" and 1234 into "i" - int i; - string s; - pcrecpp::RE re("(\\w+):(\\d+)"); - re.FullMatch("ruby:1234", &s, &i); - - Example: does not try to extract any extra sub-patterns - re.FullMatch("ruby:1234", &s); - - Example: does not try to extract into NULL - re.FullMatch("ruby:1234", NULL, &i); - - Example: integer overflow causes failure - !re.FullMatch("ruby:1234567891234", NULL, &i); - - Example: fails because there aren't enough sub-patterns: - !pcrecpp::RE("\\w+:\\d+").FullMatch("ruby:1234", &s); - - Example: fails because string cannot be stored in integer - !pcrecpp::RE("(.*)").FullMatch("ruby", &i); - - The provided pointer arguments can be pointers to any scalar numeric - type, or one of: - - string (matched piece is copied to string) - StringPiece (StringPiece is mutated to point to matched piece) - T (where "bool T::ParseFrom(const char*, int)" exists) - NULL (the corresponding matched sub-pattern is not copied) - - The function returns true iff all of the following conditions are sat- - isfied: - - a. "text" matches "pattern" exactly; - - b. The number of matched sub-patterns is >= number of supplied - pointers; - - c. The "i"th argument has a suitable type for holding the - string captured as the "i"th sub-pattern. If you pass in - NULL for the "i"th argument, or pass fewer arguments than - number of sub-patterns, "i"th captured sub-pattern is - ignored. - - The matching interface supports at most 16 arguments per call. If you - need more, consider using the more general interface - pcrecpp::RE::DoMatch. See pcrecpp.h for the signature for DoMatch. - - -PARTIAL MATCHES - - You can use the "PartialMatch" operation when you want the pattern to - match any substring of the text. - - Example: simple search for a string: - pcrecpp::RE("ell").PartialMatch("hello"); - - Example: find first number in a string: - int number; - pcrecpp::RE re("(\\d+)"); - re.PartialMatch("x*100 + 20", &number); - assert(number == 100); - - -UTF-8 AND THE MATCHING INTERFACE - - By default, pattern and text are plain text, one byte per character. - The UTF8 flag, passed to the constructor, causes both pattern and - string to be treated as UTF-8 text, still a byte stream but potentially - multiple bytes per character. In practice, the text is likelier to be - UTF-8 than the pattern, but the match returned may depend on the UTF8 - flag, so always use it when matching UTF8 text. For example, "." will - match one byte normally but with UTF8 set may match up to three bytes - of a multi-byte character. - - Example: - pcrecpp::RE_Options options; - options.set_utf8(); - pcrecpp::RE re(utf8_pattern, options); - re.FullMatch(utf8_string); - - Example: using the convenience function UTF8(): - pcrecpp::RE re(utf8_pattern, pcrecpp::UTF8()); - re.FullMatch(utf8_string); - - NOTE: The UTF8 flag is ignored if pcre was not configured with the - --enable-utf8 flag. - - -PASSING MODIFIERS TO THE REGULAR EXPRESSION ENGINE - - PCRE defines some modifiers to change the behavior of the regular - expression engine. The C++ wrapper defines an auxiliary class, - RE_Options, as a vehicle to pass such modifiers to a RE class. Cur- - rently, the following modifiers are supported: - - modifier description Perl corresponding - - PCRE_CASELESS case insensitive match /i - PCRE_MULTILINE multiple lines match /m - PCRE_DOTALL dot matches newlines /s - PCRE_DOLLAR_ENDONLY $ matches only at end N/A - PCRE_EXTRA strict escape parsing N/A - PCRE_EXTENDED ignore whitespaces /x - PCRE_UTF8 handles UTF8 chars built-in - PCRE_UNGREEDY reverses * and *? N/A - PCRE_NO_AUTO_CAPTURE disables capturing parens N/A (*) - - (*) Both Perl and PCRE allow non capturing parentheses by means of the - "?:" modifier within the pattern itself. e.g. (?:ab|cd) does not cap- - ture, while (ab|cd) does. - - For a full account on how each modifier works, please check the PCRE - API reference page. - - For each modifier, there are two member functions whose name is made - out of the modifier in lowercase, without the "PCRE_" prefix. For - instance, PCRE_CASELESS is handled by - - bool caseless() - - which returns true if the modifier is set, and - - RE_Options & set_caseless(bool) - - which sets or unsets the modifier. Moreover, PCRE_EXTRA_MATCH_LIMIT can - be accessed through the set_match_limit() and match_limit() member - functions. Setting match_limit to a non-zero value will limit the exe- - cution of pcre to keep it from doing bad things like blowing the stack - or taking an eternity to return a result. A value of 5000 is good - enough to stop stack blowup in a 2MB thread stack. Setting match_limit - to zero disables match limiting. Alternatively, you can call - match_limit_recursion() which uses PCRE_EXTRA_MATCH_LIMIT_RECURSION to - limit how much PCRE recurses. match_limit() limits the number of - matches PCRE does; match_limit_recursion() limits the depth of internal - recursion, and therefore the amount of stack that is used. - - Normally, to pass one or more modifiers to a RE class, you declare a - RE_Options object, set the appropriate options, and pass this object to - a RE constructor. Example: - - RE_options opt; - opt.set_caseless(true); - if (RE("HELLO", opt).PartialMatch("hello world")) ... - - RE_options has two constructors. The default constructor takes no argu- - ments and creates a set of flags that are off by default. The optional - parameter option_flags is to facilitate transfer of legacy code from C - programs. This lets you do - - RE(pattern, - RE_Options(PCRE_CASELESS|PCRE_MULTILINE)).PartialMatch(str); - - However, new code is better off doing - - RE(pattern, - RE_Options().set_caseless(true).set_multiline(true)) - .PartialMatch(str); - - If you are going to pass one of the most used modifiers, there are some - convenience functions that return a RE_Options class with the appropri- - ate modifier already set: CASELESS(), UTF8(), MULTILINE(), DOTALL(), - and EXTENDED(). - - If you need to set several options at once, and you don't want to go - through the pains of declaring a RE_Options object and setting several - options, there is a parallel method that give you such ability on the - fly. You can concatenate several set_xxxxx() member functions, since - each of them returns a reference to its class object. For example, to - pass PCRE_CASELESS, PCRE_EXTENDED, and PCRE_MULTILINE to a RE with one - statement, you may write: - - RE(" ^ xyz \\s+ .* blah$", - RE_Options() - .set_caseless(true) - .set_extended(true) - .set_multiline(true)).PartialMatch(sometext); - - -SCANNING TEXT INCREMENTALLY - - The "Consume" operation may be useful if you want to repeatedly match - regular expressions at the front of a string and skip over them as they - match. This requires use of the "StringPiece" type, which represents a - sub-range of a real string. Like RE, StringPiece is defined in the - pcrecpp namespace. - - Example: read lines of the form "var = value" from a string. - string contents = ...; // Fill string somehow - pcrecpp::StringPiece input(contents); // Wrap in a StringPiece - - string var; - int value; - pcrecpp::RE re("(\\w+) = (\\d+)\n"); - while (re.Consume(&input, &var, &value)) { - ...; - } - - Each successful call to "Consume" will set "var/value", and also - advance "input" so it points past the matched text. - - The "FindAndConsume" operation is similar to "Consume" but does not - anchor your match at the beginning of the string. For example, you - could extract all words from a string by repeatedly calling - - pcrecpp::RE("(\\w+)").FindAndConsume(&input, &word) - - -PARSING HEX/OCTAL/C-RADIX NUMBERS - - By default, if you pass a pointer to a numeric value, the corresponding - text is interpreted as a base-10 number. You can instead wrap the - pointer with a call to one of the operators Hex(), Octal(), or CRadix() - to interpret the text in another base. The CRadix operator interprets - C-style "0" (base-8) and "0x" (base-16) prefixes, but defaults to - base-10. - - Example: - int a, b, c, d; - pcrecpp::RE re("(.*) (.*) (.*) (.*)"); - re.FullMatch("100 40 0100 0x40", - pcrecpp::Octal(&a), pcrecpp::Hex(&b), - pcrecpp::CRadix(&c), pcrecpp::CRadix(&d)); - - will leave 64 in a, b, c, and d. - - -REPLACING PARTS OF STRINGS - - You can replace the first match of "pattern" in "str" with "rewrite". - Within "rewrite", backslash-escaped digits (\1 to \9) can be used to - insert text matching corresponding parenthesized group from the pat- - tern. \0 in "rewrite" refers to the entire matching text. For example: - - string s = "yabba dabba doo"; - pcrecpp::RE("b+").Replace("d", &s); - - will leave "s" containing "yada dabba doo". The result is true if the - pattern matches and a replacement occurs, false otherwise. - - GlobalReplace is like Replace except that it replaces all occurrences - of the pattern in the string with the rewrite. Replacements are not - subject to re-matching. For example: - - string s = "yabba dabba doo"; - pcrecpp::RE("b+").GlobalReplace("d", &s); - - will leave "s" containing "yada dada doo". It returns the number of - replacements made. - - Extract is like Replace, except that if the pattern matches, "rewrite" - is copied into "out" (an additional argument) with substitutions. The - non-matching portions of "text" are ignored. Returns true iff a match - occurred and the extraction happened successfully; if no match occurs, - the string is left unaffected. - - -AUTHOR - - The C++ wrapper was contributed by Google Inc. - Copyright (c) 2005 Google Inc. ------------------------------------------------------------------------------- - - -PCRESAMPLE(3) PCRESAMPLE(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -PCRE SAMPLE PROGRAM - - A simple, complete demonstration program, to get you started with using - PCRE, is supplied in the file pcredemo.c in the PCRE distribution. - - The program compiles the regular expression that is its first argument, - and matches it against the subject string in its second argument. No - PCRE options are set, and default character tables are used. If match- - ing succeeds, the program outputs the portion of the subject that - matched, together with the contents of any captured substrings. - - If the -g option is given on the command line, the program then goes on - to check for further matches of the same regular expression in the same - subject string. The logic is a little bit tricky because of the possi- - bility of matching an empty string. Comments in the code explain what - is going on. - - If PCRE is installed in the standard include and library directories - for your system, you should be able to compile the demonstration pro- - gram using this command: - - gcc -o pcredemo pcredemo.c -lpcre - - If PCRE is installed elsewhere, you may need to add additional options - to the command line. For example, on a Unix-like system that has PCRE - installed in /usr/local, you can compile the demonstration program - using a command like this: - - gcc -o pcredemo -I/usr/local/include pcredemo.c \ - -L/usr/local/lib -lpcre - - Once you have compiled the demonstration program, you can run simple - tests like this: - - ./pcredemo 'cat|dog' 'the cat sat on the mat' - ./pcredemo -g 'cat|dog' 'the dog sat on the cat' - - Note that there is a much more comprehensive test program, called - pcretest, which supports many more facilities for testing regular - expressions and the PCRE library. The pcredemo program is provided as a - simple coding example. - - On some operating systems (e.g. Solaris), when PCRE is not installed in - the standard library directory, you may get an error like this when you - try to run pcredemo: - - ld.so.1: a.out: fatal: libpcre.so.0: open failed: No such file or - directory - - This is caused by the way shared library support works on those sys- - tems. You need to add - - -R/usr/local/lib - - (for example) to the compile command to get round this problem. - -Last updated: 09 September 2004 -Copyright (c) 1997-2004 University of Cambridge. ------------------------------------------------------------------------------- -PCRESTACK(3) PCRESTACK(3) - - -NAME - PCRE - Perl-compatible regular expressions - - -PCRE DISCUSSION OF STACK USAGE - - When you call pcre_exec(), it makes use of an internal function called - match(). This calls itself recursively at branch points in the pattern, - in order to remember the state of the match so that it can back up and - try a different alternative if the first one fails. As matching pro- - ceeds deeper and deeper into the tree of possibilities, the recursion - depth increases. - - Not all calls of match() increase the recursion depth; for an item such - as a* it may be called several times at the same level, after matching - different numbers of a's. Furthermore, in a number of cases where the - result of the recursive call would immediately be passed back as the - result of the current call (a "tail recursion"), the function is just - restarted instead. - - The pcre_dfa_exec() function operates in an entirely different way, and - hardly uses recursion at all. The limit on its complexity is the amount - of workspace it is given. The comments that follow do NOT apply to - pcre_dfa_exec(); they are relevant only for pcre_exec(). - - You can set limits on the number of times that match() is called, both - in total and recursively. If the limit is exceeded, an error occurs. - For details, see the section on extra data for pcre_exec() in the - pcreapi documentation. - - Each time that match() is actually called recursively, it uses memory - from the process stack. For certain kinds of pattern and data, very - large amounts of stack may be needed, despite the recognition of "tail - recursion". You can often reduce the amount of recursion, and there- - fore the amount of stack used, by modifying the pattern that is being - matched. Consider, for example, this pattern: - - ([^<]|<(?!inet))+ - - It matches from wherever it starts until it encounters "<inet" or the - end of the data, and is the kind of pattern that might be used when - processing an XML file. Each iteration of the outer parentheses matches - either one character that is not "<" or a "<" that is not followed by - "inet". However, each time a parenthesis is processed, a recursion - occurs, so this formulation uses a stack frame for each matched charac- - ter. For a long string, a lot of stack is required. Consider now this - rewritten pattern, which matches exactly the same strings: - - ([^<]++|<(?!inet)) - - This uses very much less stack, because runs of characters that do not - contain "<" are "swallowed" in one item inside the parentheses. Recur- - sion happens only when a "<" character that is not followed by "inet" - is encountered (and we assume this is relatively rare). A possessive - quantifier is used to stop any backtracking into the runs of non-"<" - characters, but that is not related to stack usage. - - In environments where stack memory is constrained, you might want to - compile PCRE to use heap memory instead of stack for remembering back- - up points. This makes it run a lot more slowly, however. Details of how - to do this are given in the pcrebuild documentation. - - In Unix-like environments, there is not often a problem with the stack, - though the default limit on stack size varies from system to system. - Values from 8Mb to 64Mb are common. You can find your default limit by - running the command: - - ulimit -s - - The effect of running out of stack is often SIGSEGV, though sometimes - an error message is given. You can normally increase the limit on stack - size by code such as this: - - struct rlimit rlim; - getrlimit(RLIMIT_STACK, &rlim); - rlim.rlim_cur = 100*1024*1024; - setrlimit(RLIMIT_STACK, &rlim); - - This reads the current limits (soft and hard) using getrlimit(), then - attempts to increase the soft limit to 100Mb using setrlimit(). You - must do this before calling pcre_exec(). - - PCRE has an internal counter that can be used to limit the depth of - recursion, and thus cause pcre_exec() to give an error code before it - runs out of stack. By default, the limit is very large, and unlikely - ever to operate. It can be changed when PCRE is built, and it can also - be set when pcre_exec() is called. For details of these interfaces, see - the pcrebuild and pcreapi documentation. - - As a very rough rule of thumb, you should reckon on about 500 bytes per - recursion. Thus, if you want to limit your stack usage to 8Mb, you - should set the limit at 16000 recursions. A 64Mb stack, on the other - hand, can support around 128000 recursions. The pcretest test program - has a command line option (-S) that can be used to increase its stack. - -Last updated: 29 June 2006 -Copyright (c) 1997-2006 University of Cambridge. ------------------------------------------------------------------------------- - - |