diff options
Diffstat (limited to 'run-tests2.php')
| -rw-r--r-- | run-tests2.php | 1573 |
1 files changed, 0 insertions, 1573 deletions
diff --git a/run-tests2.php b/run-tests2.php deleted file mode 100644 index 859592cfb7..0000000000 --- a/run-tests2.php +++ /dev/null @@ -1,1573 +0,0 @@ -<?php -/* - +----------------------------------------------------------------------+ - | PHP Version 4 | - +----------------------------------------------------------------------+ - | Copyright (c) 1997-2002 The PHP Group | - +----------------------------------------------------------------------+ - | This source file is subject to version 3.0 of the PHP license, | - | that is bundled with this package in the file LICENSE, and is | - | available through the world-wide-web at the following url: | - | http://www.php.net/license/3_0.txt. | - | If you did not receive a copy of the PHP license and are unable to | - | obtain it through the world-wide-web, please send a note to | - | license@php.net so we can mail you a copy immediately. | - +----------------------------------------------------------------------+ - | Authors: Ilia Alshanetsky <ilia@php.net> | - | Preston L. Bannister <pbannister@php.net> | - | Marcus Boerger <helly@php.net> | - | Shane Caraveo <shane@php.net> | - | Derick Rethans <derick@php.net> | - | Sander Roobol <sander@php.net> | - | (based on version by: Stig Bakken <ssb@php.net>) | - | (based on the PHP 3 test framework by Rasmus Lerdorf) | - +----------------------------------------------------------------------+ - */ - -set_time_limit(0); -while(@ob_end_clean()); -if (ob_get_level()) echo "Not all buffers were deleted.\n"; -error_reporting(E_ALL); - -/********************************************************************** - * QA configuration - */ - -define('PHP_QA_EMAIL', 'qa-reports@lists.php.net'); -define('QA_SUBMISSION_PAGE', 'http://qa.php.net/buildtest-process.php'); - -/********************************************************************** - * error messages - */ - -define('PCRE_MISSING_ERROR', -'+-----------------------------------------------------------+ -| ! ERROR ! | -| The test-suite requires that you have pcre extension | -| enabled. To enable this extension either compile your PHP | -| with --with-pcre-regex or if you have compiled pcre as a | -| shared module load it via php.ini. | -+-----------------------------------------------------------+'); -define('SAFE_MODE_WARNING', -'+-----------------------------------------------------------+ -| ! WARNING ! | -| You are running the test-suite with "safe_mode" ENABLED ! | -| | -| Chances are high that no test will work at all, | -| depending on how you configured "safe_mode" ! | -+-----------------------------------------------------------+'); -define('TMP_MISSING', -'+-----------------------------------------------------------+ -| ! ERROR ! | -| You must create /tmp for session tests to work! | -| | -+-----------------------------------------------------------+'); -define('PROC_OPEN_MISSING', -'+-----------------------------------------------------------+ -| ! ERROR ! | -| The test-suite requires that proc_open() is available. | -| Please check if you disabled it in php.ini. | -+-----------------------------------------------------------+'); -define('REQ_PHP_VERSION', -'+-----------------------------------------------------------+ -| ! ERROR ! | -| The test-suite must be run with PHP 5 or later. | -| You can still test older extecutables by setting | -| TEST_PHP_EXECUTABLE and running this script with PHP 5. | -+-----------------------------------------------------------+'); -/********************************************************************** - * information scripts - */ -define('PHP_INFO_SCRIPT','<?php echo " -PHP_SAPI=" . PHP_SAPI . " -PHP_VERSION=" . phpversion() . " -ZEND_VERSION=" . zend_version() . " -PHP_OS=" . PHP_OS . " -INCLUDE_PATH=" . get_cfg_var("include_path") . " -INI=" . realpath(get_cfg_var("cfg_file_path")) . " -SCANNED_INI=" . (function_exists(\'php_ini_scanned_files\') ? - str_replace("\n","", php_ini_scanned_files()) : - "** not determined **") . " -SERVER_SOFTWARE=" . $_ENV[\'SERVER_SOFTWARE\']; -?>'); - -define('PHP_EXTENSIONS_SCRIPT','<?php print join(get_loaded_extensions(),":"); ?>'); -define('PHP_INI_SETTINGS_SCRIPT','<?php echo serialize(ini_get_all()); ?>'); - -/********************************************************************** - * various utility functions - */ - -function save_to_file($filename,$text) -{ - $fp = @fopen($filename,'w') - or die("Cannot open file '" . $filename . "' (save_to_file)"); - fwrite($fp,$text); - fclose($fp); -} - -function settings2array($settings, &$ini_settings) -{ - foreach($settings as $setting) { - if (strpos($setting, '=')!==false) { - $setting = explode("=", $setting, 2); - $name = trim($setting[0]); - $value = trim($setting[1]); - $ini_settings[$name] = $value; - } - } -} - -function settings2params(&$ini_settings) -{ - $settings = ''; - if (count($ini_settings)) { - foreach($ini_settings as $name => $value) { - $value = addslashes($value); - $settings .= " -d \"".strtolower($name)."=$value\""; - } - } - return $settings; -} - -function generate_diff($wanted,$output) -{ - $w = explode("\n", $wanted); - $o = explode("\n", $output); - $w1 = array_diff_assoc($w,$o); - $o1 = array_diff_assoc($o,$w); - $w2 = array(); - $o2 = array(); - foreach($w1 as $idx => $val) $w2[sprintf("%03d<",$idx)] = sprintf("%03d- ", $idx+1).$val; - foreach($o1 as $idx => $val) $o2[sprintf("%03d>",$idx)] = sprintf("%03d+ ", $idx+1).$val; - $diff = array_merge($w2, $o2); - ksort($diff); - return implode("\r\n", $diff); -} - -function mkpath($path,$mode = 0700) { - $dirs = split('[\\|/]',realpath($path)); - $path = $dirs[0]; - for($i = 1;$i < count($dirs);$i++) { - $path .= '/'.$dirs[$i]; - @mkdir($path,$mode); - } -} - -function copyfiles($src,$new) { - $d = dir($src); - while (($entry = $d->read())) { - if (is_file("$src/$entry")) - copy("$src/$entry","$new/$entry"); - } - $d->close(); -} - -function post_result_data($query,$data) -{ - $url = QA_SUBMISSION_PAGE.'?'.$query; - $post = "php_test_data=" . urlencode(base64_encode(preg_replace("/[\\x00]/", "[0x0]", $data))); - $r = new HTTPRequest($url,NULL,NULL,$post); - return $this->response_headers['Status']=='200'; -} - - -function execute($command, $args=NULL, $input=NULL, $cwd=NULL, $env=NULL) -{ - $data = ""; - - if (gettype($args)=='array') { - $args = join($args,' '); - } - $commandline = "$command $args"; - $proc = proc_open($commandline, array( - 0 => array('pipe', 'r'), - 1 => array('pipe', 'w')), - $pipes, $cwd, $env); - - if (!$proc) - return false; - - if ($input) { - $out = fwrite($pipes[0],$input); - if ($out != strlen($input)) { - return NULL; - } - } - - fclose($pipes[0]); - - while (true) { - /* hide errors from interrupted syscalls */ - $r = $pipes; - $w = null; - $e = null; - $n = @stream_select($r, $w, $e, 60); - - if ($n == 0) { - /* timed out */ - $data .= "\n ** ERROR: process timed out **\n"; - proc_terminate($proc); - return $data; - } else if ($n) { - $line = fread($pipes[1], 8192); - if (strlen($line) == 0) { - /* EOF */ - break; - } - $data .= $line; - } - } - $code = proc_close($proc); - return $data; -} - -function executeCode($php, $ini_overwrites, $code, $remove_headers=true, $cwd=NULL, $env=NULL) -{ - $params = NULL; - if ($ini_overwrites) { - $info_params = array(); - settings2array($ini_overwrites,$info_params); - $params = settings2params($info_params); - } - $out = execute($php, $params, $code, $cwd, $env); - // kill the headers - if ($remove_headers && preg_match("/^(.*?)\r?\n\r?\n(.*)/s", $out, $match)) { - $out = $match[2]; - } - return $out; -} - - -/********************************************************************** - * a simple request class that lets us handle http based tests - */ - -class HTTPRequest -{ - var $headers = array(); - var $timeout = 4; - var $urlparts = NULL; - var $url = ''; - var $userAgent = 'PHP-Test-Harness'; - var $options = array(); - var $postdata = NULL; - var $errmsg = ''; - var $errno = 0; - var $response; - var $response_headers; - var $outgoing_payload; - var $incoming_payload = ''; - - /* - URL is the full url - headers is assoc array of outgoing http headers - - options may include - timeout - proxy_host - proxy_port - proxy_user - proxy_pass - method (GET|POST) - - post data is, well, post data. It is not processed so - multipart stuff must be prepared before calling this - (or add it to class) - */ - function HTTPRequest($URL, $headers=array(), $options=array(), $postdata=NULL) - { - $this->urlparts = @parse_url($URL); - $this->url = $URL; - $this->options = $options; - $this->headers = $headers; - $this->postdata = &$postdata; - $this->doRequest(); - } - - function doRequest() - { - if (!$this->_validateUrl()) return; - - if (isset($this->options['timeout'])) - $this->timeout = (int)$this->options['timeout']; - - $this->_sendHTTP(); - } - - function _validateUrl() - { - if ( ! is_array($this->urlparts) ) { - return FALSE; - } - if (!isset($this->urlparts['host'])) { - $this->urlparts['host']='127.0.0.1'; - } - if (!isset($this->urlparts['port'])) { - $this->urlparts['port'] = 80; - } - if (!isset($this->urlparts['path']) || !$this->urlparts['path']) - $this->urlparts['path'] = '/'; - return TRUE; - } - - function _parseResponse() - { - if (preg_match("/^(.*?)\r?\n\r?\n(.*)/s", $this->incoming_payload, $match)) { - $this->response = $match[2]; - if (preg_match("/^HTTP\/1\.. (\d+).*/s",$match[1],$status) && !$status[1]) { - $this->errmsg = "HTTP Response $status[1] Not Found"; - return FALSE; - } - $rh = preg_split("/[\n\r]+/",$match[1]); - $this->response_headers = array(); - foreach ($rh as $line) { - if (strpos($line, ':')!==false) { - $line = explode(":", $line, 2); - $this->response_headers[trim($line[0])] = trim($line[1]); - } - } - $this->response_headers['Status']=$status[1]; - // if no content, return false - if(strlen($this->response) > 0) return TRUE; - } - $this->errmsg = 'Invalid HTTP Response'; - return FALSE; - } - - function &_getRequest() - { - $fullpath = $this->urlparts['path']. - (isset($this->urlparts['query'])?'?'.$this->urlparts['query']:''). - (isset($this->urlparts['fragment'])?'#'.$this->urlparts['fragment']:''); - if (isset($this->options['proxy_host'])) { - $fullpath = 'http://'.$this->urlparts['host'].':'.$this->urlparts['port'].$fullpath; - } - if (isset($this->options['proxy_user'])) { - $headers['Proxy-Authorization'] = 'Basic ' . base64_encode($this->options['proxy_user'].":".$this->options['proxy_pass']); - } - $headers['User-Agent'] = $this->userAgent; - $headers['Host'] = $this->urlparts['host']; - $headers['Content-Length'] = strlen($this->postdata); - $headers['Content-Type'] = 'application/x-www-form-urlencoded'; - if (isset($this->headers)) { - $headers = array_merge($headers, $this->headers); - } - $headertext = ''; - foreach ($headers as $k => $v) { - $headertext .= "$k: $v\r\n"; - } - $method = trim($this->options['method'])?strtoupper(trim($this->options['method'])):'GET'; - $this->outgoing_payload = - "$method $fullpath HTTP/1.0\r\n". - $headertext."\r\n". - $this->postdata; - return $this->outgoing_payload; - } - - function &_sendHTTP() - { - $this->_getRequest(); - $host = $this->urlparts['host']; - $port = $this->urlparts['port']; - if (isset($this->options['proxy_host'])) { - $host = $this->options['proxy_host']; - $port = isset($this->options['proxy_port'])?$this->options['proxy_port']:8080; - } - // send - if ($this->timeout > 0) { - $fp = fsockopen($host, $port, $this->errno, $this->errmsg, $this->timeout); - } else { - $fp = fsockopen($host, $port, $this->errno, $this->errmsg); - } - if (!$fp) { - $this->errmsg = "Connect Error to $host:$port"; - return NULL; - } - if ($this->timeout > 0) { - // some builds of php do not support this, silence - // the warning - @socket_set_timeout($fp, $this->timeout); - } - if (!fputs($fp, $this->outgoing_payload, strlen($this->outgoing_payload))) { - $this->errmsg = "Error Sending Request Data to $host"; - return NULL; - } - - while ($data = fread($fp, 32768)) { - $this->incoming_payload .= $data; - } - - fclose($fp); - - $this->_parseResponse(); - } - -# a simple test case -#$r = new HTTPRequest('http://localhost:81/info.php/path/info'); -#print_r($r->response_headers); -#print $r->response; - -} // end HTTPRequest - - -/********************************************************************** - * main test harness - */ - -class testHarness { - var $cwd; - var $xargs = array( - #arg env var value default description - 'c' => array('' ,'file' ,NULL ,'configuration file, see run-tests-config.php for example'), - 'd' => array('TEST_PATHS' ,'paths' ,NULL ,'colon seperate path list'), - 'e' => array('TEST_PHP_ERROR_STYLE','EMACS|MSVC' ,'EMACS' ,'editor error style'), - 'h' => array('' ,'' ,NULL ,'this help'), - 'i' => array('PHPRC' ,'path|file' ,NULL ,'ini file to use for tests (sets PHPRC)'), - 'l' => array('TEST_PHP_LOG_FORMAT' ,'string' ,'LEODC' ,'any combination of CDELO'), - 'm' => array('TEST_BASE_PATH' ,'path' ,NULL ,'copy tests to this path before testing'), - 'n' => array('NO_PHPTEST_SUMMARY' ,'' ,0 ,'do not print test summary'), - 'p' => array('TEST_PHP_EXECUTABLE' ,'path' ,NULL ,'php executable to be tested'), - 'q' => array('NO_INTERACTION' ,'' ,0 ,'no console interaction (ie dont contact QA)'), - 'r' => array('REPORT_EXIT_STATUS' ,'' ,0 ,'exit with status at end of execution'), - 's' => array('TEST_PHP_SRCDIR' ,'path' ,NULL ,'path to php source code'), - 't' => array('TEST_PHP_DETAILED' ,'number' ,0 ,'level of detail output to dump'), - 'u' => array('TEST_WEB_BASE_URL' ,'url' ,'' ,'base url for http testing'), - 'v' => array('TEST_CONTEXT_INFO' ,'' ,0 ,'view text executable context info'), - 'w' => array('TEST_WEB' ,'' ,0 ,'run tests via http'), - 'x' => array('TEST_WEB_EXT' ,'file ext' ,'php' ,'http file extension to use') - ); - - var $conf = array(); - var $test_to_run = array(); - var $test_files = array(); - var $test_results = array(); - var $failed_tests = array(); - var $exts_to_test; - var $exts_tested = 0; - var $exts_skipped = 0; - var $ignored_by_ext = 0; - var $test_dirs = array('tests', 'pear', 'ext', 'sapi'); - var $start_time; - var $end_time; - var $exec_info; - var $test_executable_iscgi = false; - var $inisettings; // the test executables settings, used for web tests - var $iswin32 = false; - - var $ddash = "====================================================================="; - var $sdash = "---------------------------------------------------------------------"; - - // Default ini settings - var $ini_overwrites = array( - 'output_handler'=>'', - 'zlib.output_compression'=>'Off', - 'open_basedir'=>'', - 'safe_mode'=>'0', - 'disable_functions'=>'', - 'output_buffering'=>'Off', - 'error_reporting'=>'2047', - 'display_errors'=>'1', - 'log_errors'=>'0', - 'html_errors'=>'0', - 'track_errors'=>'1', - 'report_memleaks'=>'1', - 'report_zend_debug'=>'0', - 'docref_root'=>'/phpmanual/', - 'docref_ext'=>'.html', - 'error_prepend_string'=>'', - 'error_append_string'=>'', - 'auto_prepend_file'=>'', - 'auto_append_file'=>'', - 'magic_quotes_runtime'=>'0', - ); - var $env = array(); - var $info_params = array(); - - function testHarness() { - $this->iswin32 = substr(PHP_OS, 0, 3) == "WIN"; - $this->checkRequirements(); - $this->env = $_ENV; - $this->removeSensitiveEnvVars(); - - $this->initializeConfiguration(); - $this->parseArgs(); - $this->setTestPaths(); - # change to working directory - if ($this->conf['TEST_PHP_SRCDIR']) { - @chdir($this->conf['TEST_PHP_SRCDIR']); - } - $this->cwd = getcwd(); - - if (!$this->conf['TEST_PHP_SRCDIR']) - $this->conf['TEST_PHP_SRCDIR'] = $this->cwd; - if (!$this->conf['TEST_BASE_PATH'] && $this->conf['TEST_PHP_SRCDIR']) - $this->conf['TEST_BASE_PATH'] = $this->conf['TEST_PHP_SRCDIR']; - if ($this->iswin32) { - $this->conf['TEST_PHP_SRCDIR'] = str_replace('/','\\',$this->conf['TEST_PHP_SRCDIR']); - $this->conf['TEST_BASE_PATH'] = str_replace('/','\\',$this->conf['TEST_BASE_PATH']); - } - - if (!$this->conf['TEST_WEB'] && !is_executable($this->conf['TEST_PHP_EXECUTABLE'])) { - $this->error("invalid PHP executable specified by TEST_PHP_EXECUTABLE = " . - $this->conf['TEST_PHP_EXECUTABLE']); - return false; - } - - $this->getInstalledExtensions(); - $this->getExecutableInfo(); - $this->getExecutableIniSettings(); - $this->test_executable_iscgi = strncmp($this->exec_info['PHP_SAPI'],'cgi',3)==0; - $this->calculateDocumentRoot(); - - // add TEST_PHP_SRCDIR to the include path, this facilitates - // tests including files from src/tests - //$this->ini_overwrites['include_path'] = $this->cwd.($this->iswin32?';.;':':.:').$this->exec_info['INCLUDE_PATH']; - - $params = array(); - settings2array($this->ini_overwrites,$params); - $this->info_params = settings2params($params); - - $this->contextHeader(); - if ($this->conf['TEST_CONTEXT_INFO']) return; - $this->loadFileList(); - $this->moveTestFiles(); - $this->run(); - $this->summarizeResults(); - } - - function getExecutableIniSettings() - { - $out = $this->runscript(PHP_INI_SETTINGS_SCRIPT,true); - $this->inisettings = unserialize($out); - } - - function getExecutableInfo() - { - $out = $this->runscript(PHP_INFO_SCRIPT,true); - $out = preg_split("/[\n\r]+/",$out); - $info = array(); - foreach ($out as $line) { - if (strpos($line, '=')!==false) { - $line = explode("=", $line, 2); - $name = trim($line[0]); - $value = trim($line[1]); - $info[$name] = $value; - } - } - $this->exec_info = $info; - } - - function getInstalledExtensions() - { - // get the list of installed extensions - $out = $this->runscript(PHP_EXTENSIONS_SCRIPT,true); - $this->exts_to_test = split(":",$out); - sort($this->exts_to_test); - $this->exts_tested = count($this->exts_to_test); - } - - // if running local, calls executeCode, - // otherwise does an http request - function runscript($script,$removeheaders=false,$cwd=NULL) - { - if ($this->conf['TEST_WEB']) { - $pi = "/testscript.{$this->conf['TEST_WEB_EXT']}"; - if (!$cwd) $cwd = $this->conf['TEST_BASE_PATH']; - $tmp_file = "$cwd$pi"; - $pi = substr($cwd,strlen($this->conf['TEST_BASE_PATH'])).$pi; - $url = "{$this->conf['TEST_WEB_BASE_URL']}$pi"; - save_to_file($tmp_file,$script); - $fd = fopen($url, "rb"); - $out = ''; - if ($fd) { - while (!feof($fd)) - $out .= fread($fd, 8192); - fclose($fd); - } - unlink($tmp_file); - if ($removeheaders && - preg_match("/^(.*?)\r?\n\r?\n(.*)/s", $this->incoming_payload, $match)) { - return $match[2]; - } - return $out; - } else { - return executeCode($this->conf['TEST_PHP_EXECUTABLE'],$this->ini_overwrites, $script,$removeheaders,$cwd,$this->env); - } - } - - - // Use this function to do any displaying of text, so that - // things can be over-written as necessary. - - function writemsg($msg) { - - echo $msg; - - } - - // Another wrapper function, this one should be used any time - // a particular test passes or fails - - function showstatus($item, $status, $reason = '') { - - switch($status) { - case 'PASSED': - $this->writemsg("PASSED: $item ($reason)\n"); - break; - case 'FAILED': - $this->writemsg("FAILED: $item ($reason)\n"); - break; - case 'SKIPPED': - $this->writemsg("SKIPPED: $item ($reason)\n"); - break; - } - } - - - function help() - { - $usage = "usage: php run-tests.php [options]\n"; - foreach ($this->xargs as $arg=>$arg_info) { - $usage .= sprintf(" -%s %-12s %s\n",$arg,$arg_info[1],$arg_info[3]); - } - return $usage; - } - - function parseArgs() { - global $argc; - global $argv; - global $_SERVER; - - if (!isset($argv)) { - $argv = $_SERVER['argv']; - $argc = $_SERVER['argc']; - } - - $conf = NULL; - for ($i=1; $i<$argc;) { - if ($argv[$i][0] != '-') continue; - $opt = $argv[$i++][1]; - if (isset($value)) unset($value); - if (@$argv[$i][0] != '-') { - @$value = $argv[$i++]; - } - switch($opt) { - case 'c': - /* TODO: Implement configuraiton file */ - include($value); - if (!isset($conf)) { - $this->writemsg("Invalid configuration file\n"); - exit(1); - } - $this->conf = array_merge($this->conf,$conf); - break; - case 'e': - $this->conf['TEST_PHP_ERROR_STYLE'] = strtoupper($value); - break; - case 'h': - print $this->help(); - exit(0); - default: - if ($this->xargs[$opt][1] && isset($value)) - $this->conf[$this->xargs[$opt][0]] = $value; - else if (!$this->xargs[$opt][1]) - $this->conf[$this->xargs[$opt][0]] = isset($value)?$value:1; - else - $this->error("Invalid argument setting for argument $opt, should be [{$this->xargs[$opt][1]}]\n"); - break; - } - } - - // set config into environment, this allows - // executed tests to find out about the test - // configurations. config file or args overwrite - // env var config settings - $this->env = array_merge($this->env,$this->conf); - if (!$this->conf['TEST_WEB'] && !$this->conf['TEST_PHP_EXECUTABLE']) { - $this->writemsg($this->help()); - exit(0); - } - } - - function removeSensitiveEnvVars() - { - # delete sensitive env vars - $this->env['SSH_CLIENT']='deleted'; - $this->env['SSH_AUTH_SOCK']='deleted'; - $this->env['SSH_TTY']='deleted'; - } - - function setEnvConfigVar($name) - { - if (isset($this->env[$name])) { - $this->conf[$name] = $this->env[$name]; - } - } - - function initializeConfiguration() - { - foreach ($this->xargs as $arg=>$arg_info) { - if ($arg_info[0]) { - # initialize the default setting - $this->conf[$arg_info[0]]=$arg_info[2]; - # get config from environment - $this->setEnvConfigVar($arg_info[0]); - } - } - } - - function setTestPaths() - { - // configure test paths from config file or command line - if (@$this->conf['TEST_PATHS']) { - $this->test_dirs = array(); - if ($this->iswin32) { - $paths = split(';',$this->conf['TEST_PATHS']); - } else { - $paths = split(':|;',$this->conf['TEST_PATHS']); - } - foreach($paths as $path) { - $this->test_dirs[] = realpath($path); - } - } - } - - function test_sort($a, $b) { - $ta = strpos($a, "{$this->cwd}/tests")===0 ? 1 + (strpos($a, "{$this->cwd}/tests/run-test")===0 ? 1 : 0) : 0; - $tb = strpos($b, "{$this->cwd}/tests")===0 ? 1 + (strpos($b, "{$this->cwd}/tests/run-test")===0 ? 1 : 0) : 0; - if ($ta == $tb) { - return strcmp($a, $b); - } else { - return $tb - $ta; - } - } - - function checkRequirements() { - if (version_compare(phpversion(), "5.0") < 0) { - $this->writemsg(REQ_PHP_VERSION); - exit; - } - if (!file_exists("/tmp")) { - $this->writemsg(TMP_MISSING); - exit; - } - if (!function_exists("proc_open")) { - $this->writemsg(PROC_OPEN_MISSING); - exit; - } - if (!extension_loaded("pcre")) { - $this->writemsg(PCRE_MISSING_ERROR); - exit; - } - if (ini_get('safe_mode')) { - $this->writemsg(SAFE_MODE_WARNING); - } - } - - // - // Write test context information. - // - function contextHeader() - { - $info = ''; - foreach ($this->exec_info as $k=>$v) { - $info .= sprintf("%-20.s: %s\n",$k,$v); - } - $exts = ''; - foreach ($this->exts_to_test as $ext) { - $exts .="$ext\n "; - } - $dirs = ''; - foreach ($this->test_dirs as $test_dir) { - $dirs .= "$test_dir\n "; - } - $conf = ''; - foreach ($this->conf as $k=>$v) { - $conf .= sprintf("%-20.s: %s\n",$k,$v); - } - - $exeinfo = ''; - if (!$this->conf['TEST_WEB']) - $exeinfo = "CWD : {$this->cwd}\n". - "PHP : {$this->conf['TEST_PHP_EXECUTABLE']}\n"; - - $this->writemsg("\n$this->ddash\n". - "$exeinfo$info\n". - "Test Harness Configuration:\n$conf\n". - "Extensions : $exts\n". - "Test Dirs : $dirs\n". - "$this->ddash\n"); - } - - function loadFileList() - { - foreach ($this->test_dirs as $dir) { - if (is_dir($dir)) { - $this->findFilesInDir($dir, ($dir == 'ext')); - } else { - $this->test_files[] = $dir; - } - } - usort($this->test_files,array($this,"test_sort")); - $this->writemsg("found ".count($this->test_files)." files\n"); - } - - function moveTestFiles() - { - if (!$this->conf['TEST_BASE_PATH'] || - $this->conf['TEST_BASE_PATH'] == $this->conf['TEST_PHP_SRCDIR']) return; - $this->writemsg("moving files from {$this->conf['TEST_PHP_SRCDIR']} to {$this->conf['TEST_BASE_PATH']}\n"); - $l = strlen($this->conf['TEST_PHP_SRCDIR']); - $files = array(); - $dirs = array(); - foreach ($this->test_files as $file) { - if (strpos($file,$this->conf['TEST_PHP_SRCDIR'])==0) { - $newlocation = $this->conf['TEST_BASE_PATH'].substr($file,$l); - $files[] = $newlocation; - $dirs[dirname($file)] = dirname($newlocation); - } else { - // XXX what to do with test files outside the - // php source directory? Need to map them into - // the new directory somehow. - } - } - foreach ($dirs as $src=>$new) { - mkpath($new); - copyfiles($src,$new); - } - $this->test_files = $files; - } - - function findFilesInDir($dir,$is_ext_dir=FALSE,$ignore=FALSE) - { - $skip = array('.', '..', 'CVS'); - $o = opendir($dir) or $this->error("cannot open directory: $dir"); - while (($name = readdir($o)) !== FALSE) { - if (in_array($name, $skip)) continue; - if (is_dir("$dir/$name")) { - $skip_ext = ($is_ext_dir && !in_array($name, $this->exts_to_test)); - if ($skip_ext) { - $this->exts_skipped++; - } - $this->findFilesInDir("$dir/$name", FALSE, $ignore || $skip_ext); - } - - // Cleanup any left-over tmp files from last run. - if (substr($name, -4) == '.tmp') { - @unlink("$dir/$name"); - continue; - } - - // Otherwise we're only interested in *.phpt files. - if (substr($name, -5) == '.phpt') { - if ($ignore) { - $this->ignored_by_ext++; - } else { - $testfile = realpath("$dir/$name"); - $this->test_files[] = $testfile; - } - } - } - closedir($o); - } - - function runHeader() - { - $this->writemsg("TIME START " . date('Y-m-d H:i:s', $this->start_time) . "\n".$this->ddash."\n"); - if (count($this->test_to_run)) { - $this->writemsg("Running selected tests.\n"); - } else { - $this->writemsg("Running all test files.\n"); - } - } - - function run() - { - $this->start_time = time(); - $this->runHeader(); - // Run selected tests. - if (count($this->test_to_run)) { - - foreach($this->test_to_run as $name=>$runnable) { - if(!preg_match("/\.phpt$/", $name)) - continue; - if ($runnable) { - $this->test_results[$name] = $this->run_test($name); - } - } - } else { - foreach ($this->test_files as $name) { - $this->test_results[$name] = $this->run_test($name); - } - } - $this->end_time = time(); - } - - function summarizeResults() - { - if (count($this->test_results) == 0) { - $this->writemsg("No tests were run.\n"); - return; - } - - $n_total = count($this->test_results); - $n_total += $this->ignored_by_ext; - - $sum_results = array('PASSED'=>0, 'SKIPPED'=>0, 'FAILED'=>0); - foreach ($this->test_results as $v) { - $sum_results[$v]++; - } - $sum_results['SKIPPED'] += $this->ignored_by_ext; - $percent_results = array(); - while (list($v,$n) = each($sum_results)) { - $percent_results[$v] = (100.0 * $n) / $n_total; - } - - $this->writemsg("\n".$this->ddash."\n". - "TIME END " . date('Y-m-d H:i:s', $this->end_time) . "\n". - $this->ddash."\n". - "TEST RESULT SUMMARY\n". - $this->sdash."\n". - "Exts skipped : " . sprintf("%4d",$this->exts_skipped) . "\n". - "Exts tested : " . sprintf("%4d",$this->exts_tested) . "\n". - $this->sdash."\n". - "Number of tests : " . sprintf("%4d",$n_total) . "\n". - "Tests skipped : " . sprintf("%4d (%2.1f%%)",$sum_results['SKIPPED'],$percent_results['SKIPPED']) . "\n". - "Tests failed : " . sprintf("%4d (%2.1f%%)",$sum_results['FAILED'],$percent_results['FAILED']) . "\n". - "Tests passed : " . sprintf("%4d (%2.1f%%)",$sum_results['PASSED'],$percent_results['PASSED']) . "\n". - $this->sdash."\n". - "Time taken : " . sprintf("%4d seconds", $this->end_time - $this->start_time) . "\n". - $this->ddash."\n"); - - $failed_test_summary = ''; - if ($this->failed_tests) { - $failed_test_summary .= "\n".$this->ddash."\n". - "FAILED TEST SUMMARY\n".$this->sdash."\n"; - foreach ($this->failed_tests as $failed_test_data) { - $failed_test_summary .= $failed_test_data['test_name'] . "\n"; - } - $failed_test_summary .= $this->ddash."\n"; - } - - if ($failed_test_summary && !$this->conf['NO_PHPTEST_SUMMARY']) { - $this->writemsg($failed_test_summary); - } - - /* We got failed Tests, offer the user to send and e-mail to QA team, unless NO_INTERACTION is set */ - if ($sum_results['FAILED'] && !$this->conf['NO_INTERACTION']) { - $fp = fopen("php://stdin", "r+"); - $this->writemsg("\nPlease allow this report to be send to the PHP QA\nteam. This will give us a better understanding in how\n"); - $this->writemsg("PHP's test cases are doing.\n"); - $this->writemsg("(choose \"s\" to just save the results to a file)? [Yns]: "); - flush(); - $user_input = fgets($fp, 10); - $just_save_results = (strtolower($user_input[0]) == 's'); - - if ($just_save_results || strlen(trim($user_input)) == 0 || strtolower($user_input[0]) == 'y') { - /* - * Collect information about the host system for our report - * Fetch phpinfo() output so that we can see the PHP enviroment - * Make an archive of all the failed tests - * Send an email - */ - - /* Ask the user to provide an email address, so that QA team can contact the user */ - if (!strncasecmp($user_input, 'y', 1) || strlen(trim($user_input)) == 0) { - echo "\nPlease enter your email address.\n(Your address will be mangled so that it will not go out on any\nmailinglist in plain text): "; - flush(); - $fp = fopen("php://stdin", "r+"); - $user_email = trim(fgets($fp, 1024)); - $user_email = str_replace("@", " at ", str_replace(".", " dot ", $user_email)); - } - - $failed_tests_data = ''; - $sep = "\n" . str_repeat('=', 80) . "\n"; - - $failed_tests_data .= $failed_test_summary . "\n"; - - if (array_sum($this->failed_tests)) { - foreach ($this->failed_tests as $test_info) { - $failed_tests_data .= $sep . $test_info['name']; - $failed_tests_data .= $sep . file_get_contents(realpath($test_info['output'])); - $failed_tests_data .= $sep . file_get_contents(realpath($test_info['diff'])); - $failed_tests_data .= $sep . "\n\n"; - } - $status = "failed"; - } else { - $status = "success"; - } - - $failed_tests_data .= "\n" . $sep . 'BUILD ENVIRONMENT' . $sep; - $failed_tests_data .= "OS:\n". PHP_OS. "\n\n"; - $automake = $autoconf = $libtool = $compiler = 'N/A'; - - if (!$this->iswin32) { - $automake = shell_exec('automake --version'); - $autoconf = shell_exec('autoconf --version'); - /* Always use the generated libtool - Mac OSX uses 'glibtool' */ - $libtool = shell_exec('./libtool --version'); - /* Try the most common flags for 'version' */ - $flags = array('-v', '-V', '--version'); - $cc_status=0; - foreach($flags AS $flag) { - system($this->env['CC']." $flag >/dev/null 2>&1", $cc_status); - if($cc_status == 0) { - $compiler = shell_exec($this->env['CC']." $flag 2>&1"); - break; - } - } - } - - $failed_tests_data .= "Automake:\n$automake\n"; - $failed_tests_data .= "Autoconf:\n$autoconf\n"; - $failed_tests_data .= "Libtool:\n$libtool\n"; - $failed_tests_data .= "Compiler:\n$compiler\n"; - $failed_tests_data .= "Bison:\n". @shell_exec('bison --version'). "\n"; - $failed_tests_data .= "\n\n"; - - if (isset($user_email)) { - $failed_tests_data .= "User's E-mail: ".$user_email."\n\n"; - } - - $failed_tests_data .= $sep . "PHPINFO" . $sep; - $failed_tests_data .= shell_exec($this->conf['TEST_PHP_EXECUTABLE'].' -dhtml_errors=0 -i'); - - $compression = 0; - - if ($just_save_results || - !post_result_data("status=$status&version=".urlencode(TESTED_PHP_VERSION),$failed_tests_data)) { - $output_file = 'php_test_results_' . date('Ymd_Hi') . ( $compression ? '.txt.gz' : '.txt' ); - $fp = fopen($output_file, "w"); - fwrite($fp, $failed_tests_data); - fclose($fp); - - if (!$just_save_results) - echo "\nThe test script was unable to automatically send the report to PHP's QA Team\n"; - echo "Please send ".$output_file." to ".PHP_QA_EMAIL." manually, thank you.\n"; - } else { - fwrite($fp, "\nThank you for helping to make PHP better.\n"); - fclose($fp); - } - } - } - - if($this->conf['REPORT_EXIT_STATUS'] and $sum_results['FAILED']) { - exit(1); - } - } - - function getINISettings(&$section_text) - { - $ini_settings = $this->ini_overwrites; - // Any special ini settings - // these may overwrite the test defaults... - if (array_key_exists('INI', $section_text)) { - settings2array(preg_split( "/[\n\r]+/", $section_text['INI']), $ini_settings); - } - return $ini_settings; - } - - function getINIParams(&$section_text) - { - if (!$section_text) return ''; - // XXX php5 current has a problem doing this in one line - // it fails with Only variables can be passed by reference - // on test ext\calendar\tests\jdtojewish.phpt - // return settings2params($this->getINISettings($section_text)); - $ini = $this->getINISettings($section_text); - return settings2params($ini); - } - - function calculateDocumentRoot() - { - if ($this->conf['TEST_WEB'] || $this->test_executable_iscgi) { - // configure DOCUMENT_ROOT for web tests - // this assumes that directories from the base url - // matches directory depth from the base path - $parts = parse_url($this->conf['TEST_WEB_BASE_URL']); - $depth = substr_count($parts['path'],'/'); - $docroot = $this->conf['TEST_BASE_PATH']; - for ($i=0 ; $i < $depth; $i++) $docroot = dirname($docroot); - $this->conf['TEST_DOCUMENT_ROOT']=$docroot; - $this->conf['TEST_BASE_SCRIPT_NAME']=$parts['path']; - $this->conf['TEST_SERVER_URL']=substr($this->conf['TEST_WEB_BASE_URL'],0,strlen($this->conf['TEST_WEB_BASE_URL'])-strlen($parts['path'])); - } else { - $this->conf['TEST_DOCUMENT_ROOT']=''; - $this->conf['TEST_BASE_SCRIPT_NAME']=''; - $this->conf['TEST_SERVER_URL']=''; - } - } - - function evalSettings($filename,$data) { - // we eval the section so we can allow dynamic env vars - // for cgi testing - $filename = str_replace('\\','/',$filename); - $cwd = str_replace('\\','/',$this->cwd); - $filepath = dirname($filename); - $scriptname = substr($filename,strlen($this->conf['TEST_DOCUMENT_ROOT'])); - // eval fails if no newline - return eval("$data\n"); - } - - function getENVSettings(&$section_text,$testfile) - { - $env = $this->env; - // Any special environment settings - // these may overwrite the test defaults... - if (array_key_exists('ENV', $section_text)) { - $sect = $this->evalSettings($testfile,$section_text['ENV']); - //print "data evaled:\n$sect\n"; - settings2array(preg_split( "/[\n\r]+/", $sect), $env); - } - return $env; - } - - function getEvalTestSettings($section_text,$testfile) - { - $rq = array(); - // Any special environment settings - // these may overwrite the test defaults... - if ($section_text) { - $sect = $this->evalSettings($testfile,$section_text); - //print "data evaled:\n$sect\n"; - settings2array(preg_split( "/[\n\r]+/", $sect), $rq); - } - return $rq; - } - - // - // Load the sections of the test file. - // - function getSectionText($file) - { - // Load the sections of the test file. - $section_text = array( - 'TEST' => '(unnamed test)', - 'SKIPIF' => '', - 'GET' => '', - 'ARGS' => '', - '_FILE' => $file, - '_DIR' => realpath(dirname($file)), - ); - - $fp = @fopen($file, "r") - or $this->error("Cannot open test file: $file"); - - $section = ''; - while (!feof($fp)) { - $line = fgets($fp); - // Match the beginning of a section. - if (ereg('^--([A-Z]+)--',$line,$r)) { - $section = $r[1]; - $section_text[$section] = ''; - continue; - } - - // Add to the section text. - $section_text[$section] .= $line; - } - fclose($fp); - foreach ($section_text as $k=>$v) { - // for POST data ,we only want to trim the last new line! - if ($k == 'POST' && preg_match('/^(.*?)\r?\n$/Ds',$v,$matches)) { - $section_text[$k]=$matches[1]; - } else { - $section_text[$k]=trim($v); - } - } - return $section_text; - } - - // - // Check if test should be skipped. - // - function getSkipReason($file,&$section_text,$docgi=false) - { - // if the test uses POST or GET, and it's not the cgi - // executable, skip - if ($docgi && !$this->conf['TEST_WEB'] && !$this->test_executable_iscgi) { - $this->showstatus($section_text['TEST'], 'SKIPPED', 'CGI Test needs CGI Binary'); - return "SKIPPED"; - } - // if we're doing web testing, then we wont be able to set - // ini setting on the command line. be sure the executables - // ini settings are compatible with the test, or skip - if (($docgi || $this->conf['TEST_WEB']) && - isset($section_text['INI']) && $section_text['INI']) { - $settings = $this->getINISettings($section_text); - foreach ($settings as $k=>$v) { - if (strcasecmp($v,'off')==0 || !$v) $v=''; - $haveval = isset($this->inisettings[$k]['local_value']); - if ($k == 'include_path') { - // we only want to know that src directory - // is in the include path - if (strpos($this->inisettings[$k]['local_value'],$this->cwd)) - continue; - } - if (($haveval && $this->inisettings[$k]['local_value'] != $v) || (!$haveval && $v)) { - $this->showstatus($section_text['TEST'], 'SKIPPED', "Test requires ini setting $k=[$v], not [".($haveval?$this->inisettings[$k]['local_value']:'')."]"); - return "SKIPPED"; - } - } - } - // now handle a SKIPIF section - if ($section_text['SKIPIF']) { - $output = trim($this->runscript($section_text['SKIPIF'],$this->test_executable_iscgi,realpath(dirname($file))),true); - if (!$output) return NULL; - if ($this->conf['TEST_PHP_DETAILED'] > 2) - print "SKIPIF: [$output]\n"; - if (eregi("^skip", $output)){ - - $reason = (ereg("^skip[[:space:]]*(.+)\$", $output)) ? ereg_replace("^skip[[:space:]]*(.+)\$", "\\1", $output) : FALSE; - $this->showstatus($section_text['TEST'], 'SKIPPED', $reason); - return 'SKIPPED'; - } - if (eregi("^info", $output)) { - $reason = (ereg("^info[[:space:]]*(.+)\$", $output)) ? ereg_replace("^info[[:space:]]*(.+)\$", "\\1", $output) : FALSE; - if ($reason) { - $tested .= " (info: $reason)"; - } - } - } - return NULL; - } - - // - // Run an individual test case. - // - function run_test($file) - { - if ($this->conf['TEST_PHP_DETAILED']) - $this->writemsg("\n=================\nTEST $file\n"); - - $section_text = $this->getSectionText($file); - - if ($this->iswin32) - $shortname = str_replace($this->conf['TEST_BASE_PATH'].'\\', '', $file); - else - $shortname = str_replace($this->conf['TEST_BASE_PATH'].'/', '', $file); - $tested = $section_text['TEST']." [$shortname]"; - - if ($this->conf['TEST_WEB']) { - $tmp_file = ereg_replace('\.phpt$','.'.$this->conf['TEST_WEB_EXT'],$file); - $uri = $this->conf['TEST_BASE_SCRIPT_NAME'].str_replace($this->conf['TEST_BASE_PATH'], '', $tmp_file); - $uri = str_replace('\\', '/', $uri); - } else { - $tmp_file = ereg_replace('\.phpt$','.php',$file); - } - @unlink($tmp_file); - - // unlink old test results - @unlink(ereg_replace('\.phpt$','.diff',$file)); - @unlink(ereg_replace('\.phpt$','.log',$file)); - @unlink(ereg_replace('\.phpt$','.exp',$file)); - @unlink(ereg_replace('\.phpt$','.out',$file)); - - if (!$this->conf['TEST_WEB']) { - // Reset environment from any previous test. - $env = $this->getENVSettings($section_text,$tmp_file); - $ini_overwrites = $this->getINIParams($section_text); - } - - // if this is a cgi test, prepare for it - $query_string = ''; - $havepost = array_key_exists('POST', $section_text) && !empty($section_text['POST']); - // allow empty query_string requests - $haveget = array_key_exists('GET', $section_text) && !empty($section_text['GET']); - $do_cgi = array_key_exists('CGI', $section_text) || $haveget || $havepost; - - $skipreason = $this->getSkipReason($file,$section_text,$do_cgi); - if ($skipreason == 'SKIPPED') { - return $skipreason; - } - - // We've satisfied the preconditions - run the test! - save_to_file($tmp_file,$section_text['FILE']); - - $post = NULL; - $args = ""; - - $headers = array(); - if ($this->conf['TEST_WEB']) { - $request = $this->getEvalTestSettings(@$section_text['REQUEST'],$tmp_file); - $headers = $this->getEvalTestSettings(@$section_text['HEADERS'],$tmp_file); - - $method = isset($request['method'])?$request['method']:$havepost?'POST':'GET'; - $query_string = $haveget?$section_text['GET']:''; - - $options = array(); - $options['method']=$method; - if (isset($this->conf['timeout'])) $options['timeout'] = $this->conf['timeout']; - if (isset($this->conf['proxy_host'])) $options['proxy_host'] = $this->conf['proxy_host']; - if (isset($this->conf['proxy_port'])) $options['proxy_port'] = $this->conf['proxy_port']; - if (isset($this->conf['proxy_user'])) $options['proxy_user'] = $this->conf['proxy_user']; - if (isset($this->conf['proxy_pass'])) $options['proxy_pass'] = $this->conf['proxy_pass']; - - $post = $havepost?$section_text['POST']:NULL; - $url = $this->conf['TEST_SERVER_URL']; - if (isset($request['SCRIPT_NAME'])) - $url .= $request['SCRIPT_NAME']; - else - $url .= $uri; - if (isset($request['PATH_INFO'])) - $url .= $request['PATH_INFO']; - if (isset($request['FRAGMENT'])) - $url .= '#'.$request['FRAGMENT']; - if (isset($request['QUERY_STRING'])) - $query_string = $request['QUERY_STRING']; - if ($query_string) - $url .= '?'.$query_string; - if ($this->conf['TEST_PHP_DETAILED']) - $this->writemsg("\nURL = $url\n"); - } else if ($do_cgi) { - $query_string = $haveget?$section_text['GET']:''; - - if (!array_key_exists('GATEWAY_INTERFACE', $env)) - $env['GATEWAY_INTERFACE']='CGI/1.1'; - if (!array_key_exists('SERVER_SOFTWARE', $env)) - $env['SERVER_SOFTWARE']='PHP Test Harness'; - if (!array_key_exists('SERVER_SOFTWARE', $env)) - $env['SERVER_NAME']='127.0.0.1'; - if (!array_key_exists('REDIRECT_STATUS', $env)) - $env['REDIRECT_STATUS']='200'; - if (!array_key_exists('SERVER_NAME', $env)) - $env['QUERY_STRING']=$query_string; - if (!array_key_exists('PATH_TRANSLATED', $env) && - !array_key_exists('SCRIPT_FILENAME', $env)) { - $env['PATH_TRANSLATED']=$tmp_file; - $env['SCRIPT_FILENAME']=$tmp_file; - } - if (!array_key_exists('PATH_TRANSLATED', $env)) - $env['PATH_TRANSLATED']=''; - if (!array_key_exists('PATH_INFO', $env)) - $env['PATH_INFO']=''; - if (!array_key_exists('SCRIPT_NAME', $env)) - $env['SCRIPT_NAME']=''; - if (!array_key_exists('SCRIPT_FILENAME', $env)) - $env['SCRIPT_FILENAME']=''; - - if (array_key_exists('POST', $section_text) && (!$haveget || !empty($section_text['POST']))) { - $post = $section_text['POST']; - $content_length = strlen($post); - if (!array_key_exists('REQUEST_METHOD', $env)) - $env['REQUEST_METHOD']='POST'; - if (!array_key_exists('CONTENT_TYPE', $env)) - $env['CONTENT_TYPE']='application/x-www-form-urlencoded'; - if (!array_key_exists('CONTENT_LENGTH', $env)) - $env['CONTENT_LENGTH']=$content_length; - } else { - if (!array_key_exists('REQUEST_METHOD', $env)) - $env['REQUEST_METHOD']='GET'; - if (!array_key_exists('CONTENT_TYPE', $env)) - $env['CONTENT_TYPE']=''; - if (!array_key_exists('CONTENT_LENGTH', $env)) - $env['CONTENT_LENGTH']=''; - } - if ($this->conf['TEST_PHP_DETAILED'] > 1) - $this->writemsg("\nCONTENT_LENGTH = " . $env['CONTENT_LENGTH'] . - "\nCONTENT_TYPE = " . $env['CONTENT_TYPE'] . - "\nPATH_TRANSLATED = " . $env['PATH_TRANSLATED'] . - "\nPATH_INFO = " . $env['PATH_INFO'] . - "\nQUERY_STRING = " . $env['QUERY_STRING'] . - "\nREDIRECT_STATUS = " . $env['REDIRECT_STATUS'] . - "\nREQUEST_METHOD = " . $env['REQUEST_METHOD'] . - "\nSCRIPT_NAME = " . $env['SCRIPT_NAME'] . - "\nSCRIPT_FILENAME = " . $env['SCRIPT_FILENAME'] . "\n"); - /* not cgi spec to put query string on command line, - but used by a couple tests to catch a security hole - in older php versions. At least IIS can be configured - to do this. */ - $args = $env['QUERY_STRING']; - } else { - $args = $section_text['ARGS'] ? $section_text['ARGS'] : ''; - $args = "$ini_overwrites $tmp_file $args 2>&1"; - } - - if ($this->conf['TEST_WEB']) { - // we want headers also, so fopen - $r = new HTTPRequest($url,$headers,$options,$post); - //$out = preg_replace("/\r\n/","\n",$r->response); - $out = $r->response; - $headers = $r->response_headers; - //print $r->outgoing_payload."\n"; - //print $r->incoming_payload."\n"; - } else { - $out = execute($this->conf['TEST_PHP_EXECUTABLE'],$args,$post,$this->cwd,$env); - // if this is a cgi, remove the headers first - if ($this->test_executable_iscgi - && preg_match("/^(.*?)\r?\n\r?\n(.*)/s", $out, $match)) { - $out = $match[2]; - $rh = preg_split("/[\n\r]+/",$match[1]); - $headers = array(); - foreach ($rh as $line) { - if (strpos($line, ':')!==false) { - $line = explode(":", $line, 2); - $headers[trim($line[0])] = trim($line[1]); - } - } - } - } - - if ($this->conf['TEST_PHP_DETAILED'] > 2) { - echo "HEADERS: "; - print_r($headers); - echo "OUTPUT: \n$out\n"; - - } - - // Does the output match what is expected? - $output = trim($out); - $output = preg_replace('/\r\n/',"\n",$output); - - $failed = FALSE; - - if (isset($section_text['EXPECTF']) || isset($section_text['EXPECTREGEX'])) { - if (isset($section_text['EXPECTF'])) { - $wanted = $section_text['EXPECTF']; - } else { - $wanted = $section_text['EXPECTREGEX']; - } - $wanted_re = preg_replace('/\r\n/',"\n",$wanted); - if (isset($section_text['EXPECTF'])) { - $wanted_re = preg_quote($wanted_re, '/'); - // Stick to basics - $wanted_re = str_replace("%s", ".+?", $wanted_re); //not greedy - $wanted_re = str_replace("%i", "[+\-]?[0-9]+", $wanted_re); - $wanted_re = str_replace("%d", "[0-9]+", $wanted_re); - $wanted_re = str_replace("%x", "[0-9a-fA-F]+", $wanted_re); - $wanted_re = str_replace("%f", "[+\-]?\.?[0-9]+\.?[0-9]*(E-?[0-9]+)?", $wanted_re); - $wanted_re = str_replace("%c", ".", $wanted_re); - // %f allows two points "-.0.0" but that is the best *simple* expression - } - /* DEBUG YOUR REGEX HERE - var_dump($wanted_re); - print(str_repeat('=', 80) . "\n"); - var_dump($output); - */ - $failed = !preg_match("/^$wanted_re\$/s", $output); - } - - $skipexpect = false; - if (!$failed && $this->conf['TEST_WEB'] && isset($section_text['EXPECTHEADERS'])) { - $want = array(); - $lines = preg_split("/[\n\r]+/",$section_text['EXPECTHEADERS']); - $wanted=''; - foreach ($lines as $line) { - if (strpos($line, ':')!==false) { - $line = explode(":", $line, 2); - $want[trim($line[0])] = trim($line[1]); - $wanted .= trim($line[0]).': '.trim($line[1])."\n"; - } - } - $output=''; - foreach ($want as $k=>$v) { - $output .= "$k: {$headers[$k]}\n"; - if (!isset($headers[$k]) || $headers[$k] != $v) { - $failed = TRUE; - } - } - - // different servers may do different things on non-200 results - // for instance, IIS will deliver it's own error pages, so we - // cannot expect to match up the EXPECT section. We may however, - // want to match EXPECT on more than 200 results, so this may - // need to change later. - $skipexpect = isset($headers['Status']) && $headers['Status'] != 200; - } - - if (!$failed && !$skipexpect && isset($section_text['EXPECT'])) { - $wanted = $section_text['EXPECT']; - $wanted = preg_replace('/\r\n/',"\n",$wanted); - $failed = (0 != strcmp($output,$wanted)); - } - - if (!$failed) { - @unlink($tmp_file); - $this->showstatus($tested, 'PASSED'); - return 'PASSED'; - } - - // Test failed so we need to report details. - $this->showstatus($tested, 'FAILED'); - - $this->failed_tests[] = array( - 'name' => $file, - 'test_name' => $tested, - 'output' => ereg_replace('\.phpt$','.log', $file), - 'diff' => ereg_replace('\.phpt$','.diff', $file) - ); - - if ($this->conf['TEST_PHP_DETAILED']) - $this->writemsg(generate_diff($wanted,$output)."\n"); - - // write .exp - if (strpos($this->conf['TEST_PHP_LOG_FORMAT'],'E') !== FALSE) { - $logname = ereg_replace('\.phpt$','.exp',$file); - save_to_file($logname,$wanted); - } - - // write .out - if (strpos($this->conf['TEST_PHP_LOG_FORMAT'],'O') !== FALSE) { - $logname = ereg_replace('\.phpt$','.out',$file); - save_to_file($logname,$output); - } - - // write .diff - if (strpos($this->conf['TEST_PHP_LOG_FORMAT'],'D') !== FALSE) { - $logname = ereg_replace('\.phpt$','.diff',$file); - save_to_file($logname,generate_diff($wanted,$output)); - } - - // write .log - if (strpos($this->conf['TEST_PHP_LOG_FORMAT'],'L') !== FALSE) { - $logname = ereg_replace('\.phpt$','.log',$file); - save_to_file($logname, - "\n---- EXPECTED OUTPUT\n$wanted\n". - "---- ACTUAL OUTPUT\n$output\n". - "---- FAILED\n"); - // display emacs/msvc error output - if (strpos($this->conf['TEST_PHP_LOG_FORMAT'],'C') !== FALSE) { - $this->error_report($file,$logname,$tested); - } - } - return 'FAILED'; - } - - // - // Write an error in a format recognizable to Emacs or MSVC. - // - function error_report($testname,$logname,$tested) - { - $testname = realpath($testname); - $logname = realpath($logname); - switch ($this->conf['TEST_PHP_ERROR_STYLE']) { - default: - case 'MSVC': - $this->writemsg($testname . "(1) : $tested\n"); - $this->writemsg($logname . "(1) : $tested\n"); - break; - case 'EMACS': - $this->writemsg($testname . ":1: $tested\n"); - $this->writemsg($logname . ":1: $tested\n"); - break; - } - } - - function error($message) - { - $this->writemsg("ERROR: {$message}\n"); - exit(1); - } -} - -$test = new testHarness(); -/* - * Local variables: - * tab-width: 4 - * c-basic-offset: 4 - * End: - * vim600: fdm=marker - * vim: noet sw=4 ts=4 - */ -?> |