Use autoconf to generate compiler options

Hopefully this means we'll break on fewer platforms.

Also, remove some of the extra optimization flags (e.g. -O3
-fomit-frame-pointer), which don't really do much.

1 files changed, 1703 insertions, 98 deletions

diff --git a/configure b/configure
index 9f3694f..1731896 100755
--- a/configure
+++ b/configure
@@ -1,13 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for FULL-PACKAGE-NAME VERSION.
+# Generated by GNU Autoconf 2.69 for FULL-PACKAGE-NAME VERSION.
 #
 # Report bugs to <BUG-REPORT-ADDRESS>.
 #
 #
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -136,6 +134,31 @@ export LANGUAGE
 # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then
   as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
@@ -169,7 +192,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
 else
   exitcode=1; echo positional parameters were not saved.
 fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
   as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
@@ -214,21 +238,25 @@ IFS=$as_save_IFS
 
 
       if test "x$CONFIG_SHELL" != x; then :
-  # We cannot yet assume a decent shell, so we have to provide a
-	# neutralization value for shells without unset; and this also
-	# works around shells that cannot unset nonexistent variables.
-	# Preserve -v and -x to the replacement shell.
-	BASH_ENV=/dev/null
-	ENV=/dev/null
-	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-	export CONFIG_SHELL
-	case $- in # ((((
-	  *v*x* | *x*v* ) as_opts=-vx ;;
-	  *v* ) as_opts=-v ;;
-	  *x* ) as_opts=-x ;;
-	  * ) as_opts= ;;
-	esac
-	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
 fi
 
     if test x$as_have_required = xno; then :
@@ -331,6 +359,14 @@ $as_echo X"$as_dir" |
 
 
 } # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
 # as_fn_append VAR VALUE
 # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -452,6 +488,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
   chmod +x "$as_me.lineno" ||
     { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
   # original and so on.  Autoconf is especially sensitive to this).
@@ -486,16 +526,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -507,28 +547,8 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -602,11 +622,23 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='LTLIBOBJS
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
 LIBOBJS
 EGREP
 GREP
 CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
 OBJEXT
 EXEEXT
 ac_ct_CC
@@ -614,6 +646,29 @@ CPPFLAGS
 LDFLAGS
 CFLAGS
 CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
 target_alias
 host_alias
 build_alias
@@ -655,6 +710,7 @@ SHELL'
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
+enable_dependency_tracking
 with_gmp
 with_mpir
 '
@@ -1122,8 +1178,6 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used" >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1266,6 +1320,11 @@ Fine tuning of the installation directories:
 _ACEOF
 
   cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
 _ACEOF
 fi
 
@@ -1275,6 +1334,15 @@ if test -n "$ac_init_help"; then
    esac
   cat <<\_ACEOF
 
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
+
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
@@ -1358,9 +1426,9 @@ test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 FULL-PACKAGE-NAME configure VERSION
-generated by GNU Autoconf 2.68
+generated by GNU Autoconf 2.69
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1436,7 +1504,7 @@ $as_echo "$ac_try_echo"; } >&5
 	 test ! -s conftest.err
        } && test -s conftest$ac_exeext && {
 	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
+	 test -x conftest$ac_exeext
        }; then :
   ac_retval=0
 else
@@ -1727,7 +1795,8 @@ int
 main ()
 {
 static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))];
-test_array [0] = 0
+test_array [0] = 0;
+return test_array [0];
 
   ;
   return 0;
@@ -1743,7 +1812,8 @@ main ()
 {
 static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1)
 		 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))];
-test_array [0] = 0
+test_array [0] = 0;
+return test_array [0];
 
   ;
   return 0;
@@ -1854,7 +1924,8 @@ int
 main ()
 {
 static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)];
-test_array [0] = 0
+test_array [0] = 0;
+return test_array [0];
 
   ;
   return 0;
@@ -1954,7 +2025,7 @@ This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by FULL-PACKAGE-NAME $as_me VERSION, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
 
@@ -2304,8 +2375,588 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 ac_config_headers="$ac_config_headers src/config.h"
 
+ac_aux_dir=
+for ac_dir in build-aux "$srcdir"/build-aux; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+ac_config_files="$ac_config_files buildenv"
+
+
+am__api_version='1.12'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='full-package-name'
+ VERSION='VERSION'
+
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
 
 # Checks for programs.
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2328,7 +2979,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2368,7 +3019,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2421,7 +3072,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2462,7 +3113,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -2520,7 +3171,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2564,7 +3215,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3010,8 +3661,7 @@ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
 /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
 struct buf { int x; };
 FILE * (*rcsopen) (struct buf *, struct stat *, int);
@@ -3096,6 +3746,537 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5
+$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
+if ${ac_cv_prog_cc_c99+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c99=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <wchar.h>
+#include <stdio.h>
+
+// Check varargs macros.  These examples are taken from C99 6.10.3.5.
+#define debug(...) fprintf (stderr, __VA_ARGS__)
+#define showlist(...) puts (#__VA_ARGS__)
+#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
+static void
+test_varargs_macros (void)
+{
+  int x = 1234;
+  int y = 5678;
+  debug ("Flag");
+  debug ("X = %d\n", x);
+  showlist (The first, second, and third items.);
+  report (x>y, "x is %d but y is %d", x, y);
+}
+
+// Check long long types.
+#define BIG64 18446744073709551615ull
+#define BIG32 4294967295ul
+#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
+#if !BIG_OK
+  your preprocessor is broken;
+#endif
+#if BIG_OK
+#else
+  your preprocessor is broken;
+#endif
+static long long int bignum = -9223372036854775807LL;
+static unsigned long long int ubignum = BIG64;
+
+struct incomplete_array
+{
+  int datasize;
+  double data[];
+};
+
+struct named_init {
+  int number;
+  const wchar_t *name;
+  double average;
+};
+
+typedef const char *ccp;
+
+static inline int
+test_restrict (ccp restrict text)
+{
+  // See if C++-style comments work.
+  // Iterate through items via the restricted pointer.
+  // Also check for declarations in for loops.
+  for (unsigned int i = 0; *(text+i) != '\0'; ++i)
+    continue;
+  return 0;
+}
+
+// Check varargs and va_copy.
+static void
+test_varargs (const char *format, ...)
+{
+  va_list args;
+  va_start (args, format);
+  va_list args_copy;
+  va_copy (args_copy, args);
+
+  const char *str;
+  int number;
+  float fnumber;
+
+  while (*format)
+    {
+      switch (*format++)
+	{
+	case 's': // string
+	  str = va_arg (args_copy, const char *);
+	  break;
+	case 'd': // int
+	  number = va_arg (args_copy, int);
+	  break;
+	case 'f': // float
+	  fnumber = va_arg (args_copy, double);
+	  break;
+	default:
+	  break;
+	}
+    }
+  va_end (args_copy);
+  va_end (args);
+}
+
+int
+main ()
+{
+
+  // Check bool.
+  _Bool success = false;
+
+  // Check restrict.
+  if (test_restrict ("String literal") == 0)
+    success = true;
+  char *restrict newvar = "Another string";
+
+  // Check varargs.
+  test_varargs ("s, d' f .", "string", 65, 34.234);
+  test_varargs_macros ();
+
+  // Check flexible array members.
+  struct incomplete_array *ia =
+    malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
+  ia->datasize = 10;
+  for (int i = 0; i < ia->datasize; ++i)
+    ia->data[i] = i * 1.234;
+
+  // Check named initializers.
+  struct named_init ni = {
+    .number = 34,
+    .name = L"Test wide string",
+    .average = 543.34343,
+  };
+
+  ni.number = 58;
+
+  int dynamic_array[ni.number];
+  dynamic_array[ni.number - 1] = 543;
+
+  // work around unused variable warnings
+  return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
+	  || dynamic_array[ni.number - 1] != 543);
+
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c99=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c99" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c99" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c99"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
+$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c99" != xno; then :
+
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Wall" >&5
+$as_echo_n "checking whether C compiler accepts -Wall... " >&6; }
+if ${ax_cv_check_cflags___Wall+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  -Wall"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ax_cv_check_cflags___Wall=yes
+else
+  ax_cv_check_cflags___Wall=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Wall" >&5
+$as_echo "$ax_cv_check_cflags___Wall" >&6; }
+if test x"$ax_cv_check_cflags___Wall" = xyes; then :
+  if ${CFLAGS+:} false; then :
+  case " $CFLAGS " in
+    *" -Wall "*)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS already contains -Wall"; } >&5
+  (: CFLAGS already contains -Wall) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      ;;
+    *)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS=\"\$CFLAGS -Wall\""; } >&5
+  (: CFLAGS="$CFLAGS -Wall") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      CFLAGS="$CFLAGS -Wall"
+      ;;
+   esac
+else
+  CFLAGS="-Wall"
+fi
+
+else
+  :
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Wextra" >&5
+$as_echo_n "checking whether C compiler accepts -Wextra... " >&6; }
+if ${ax_cv_check_cflags___Wextra+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  -Wextra"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ax_cv_check_cflags___Wextra=yes
+else
+  ax_cv_check_cflags___Wextra=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Wextra" >&5
+$as_echo "$ax_cv_check_cflags___Wextra" >&6; }
+if test x"$ax_cv_check_cflags___Wextra" = xyes; then :
+  if ${CFLAGS+:} false; then :
+  case " $CFLAGS " in
+    *" -Wextra "*)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS already contains -Wextra"; } >&5
+  (: CFLAGS already contains -Wextra) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      ;;
+    *)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS=\"\$CFLAGS -Wextra\""; } >&5
+  (: CFLAGS="$CFLAGS -Wextra") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      CFLAGS="$CFLAGS -Wextra"
+      ;;
+   esac
+else
+  CFLAGS="-Wextra"
+fi
+
+else
+  :
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Wno-missing-field-initializers" >&5
+$as_echo_n "checking whether C compiler accepts -Wno-missing-field-initializers... " >&6; }
+if ${ax_cv_check_cflags___Wno_missing_field_initializers+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  -Wno-missing-field-initializers"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ax_cv_check_cflags___Wno_missing_field_initializers=yes
+else
+  ax_cv_check_cflags___Wno_missing_field_initializers=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Wno_missing_field_initializers" >&5
+$as_echo "$ax_cv_check_cflags___Wno_missing_field_initializers" >&6; }
+if test x"$ax_cv_check_cflags___Wno_missing_field_initializers" = xyes; then :
+  if ${CFLAGS+:} false; then :
+  case " $CFLAGS " in
+    *" -Wno-missing-field-initializers "*)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS already contains -Wno-missing-field-initializers"; } >&5
+  (: CFLAGS already contains -Wno-missing-field-initializers) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      ;;
+    *)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS=\"\$CFLAGS -Wno-missing-field-initializers\""; } >&5
+  (: CFLAGS="$CFLAGS -Wno-missing-field-initializers") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      CFLAGS="$CFLAGS -Wno-missing-field-initializers"
+      ;;
+   esac
+else
+  CFLAGS="-Wno-missing-field-initializers"
+fi
+
+else
+  :
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Wno-unused-parameter" >&5
+$as_echo_n "checking whether C compiler accepts -Wno-unused-parameter... " >&6; }
+if ${ax_cv_check_cflags___Wno_unused_parameter+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  ax_check_save_flags=$CFLAGS
+  CFLAGS="$CFLAGS  -Wno-unused-parameter"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ax_cv_check_cflags___Wno_unused_parameter=yes
+else
+  ax_cv_check_cflags___Wno_unused_parameter=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  CFLAGS=$ax_check_save_flags
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Wno_unused_parameter" >&5
+$as_echo "$ax_cv_check_cflags___Wno_unused_parameter" >&6; }
+if test x"$ax_cv_check_cflags___Wno_unused_parameter" = xyes; then :
+  if ${CFLAGS+:} false; then :
+  case " $CFLAGS " in
+    *" -Wno-unused-parameter "*)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS already contains -Wno-unused-parameter"; } >&5
+  (: CFLAGS already contains -Wno-unused-parameter) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      ;;
+    *)
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: : CFLAGS=\"\$CFLAGS -Wno-unused-parameter\""; } >&5
+  (: CFLAGS="$CFLAGS -Wno-unused-parameter") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      CFLAGS="$CFLAGS -Wno-unused-parameter"
+      ;;
+   esac
+else
+  CFLAGS="-Wno-unused-parameter"
+fi
+
+else
+  :
+fi
+
 
 # Checks for libraries.
 
@@ -3104,7 +4285,6 @@ if test "${with_gmp+set}" = set; then :
   withval=$with_gmp;
 fi
 
-
 if test "x$with_gmp" != "xno"; then :
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __gmpz_init in -lgmp" >&5
@@ -3403,7 +4583,7 @@ do
     for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+      as_fn_executable_p "$ac_path_GREP" || continue
 # Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in
@@ -3469,7 +4649,7 @@ do
     for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+      as_fn_executable_p "$ac_path_EGREP" || continue
 # Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in
@@ -4003,6 +5183,30 @@ LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
 
 : "${CONFIG_STATUS=./config.status}"
 ac_write_fail=0
@@ -4301,16 +5505,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -4370,28 +5574,16 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -4413,7 +5605,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # values after options handling.
 ac_log="
 This file was extended by FULL-PACKAGE-NAME $as_me VERSION, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -4426,6 +5618,9 @@ on `(hostname || uname -n) 2>/dev/null | sed 1q`
 
 _ACEOF
 
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
 
 case $ac_config_headers in *"
 "*) set x $ac_config_headers; shift; ac_config_headers=$*;;
@@ -4434,7 +5629,9 @@ esac
 
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 # Files that config.status was made for.
+config_files="$ac_config_files"
 config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
 
 _ACEOF
 
@@ -4453,12 +5650,20 @@ Usage: $0 [OPTION]... [TAG]...
                    do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
       --header=FILE[:TEMPLATE]
                    instantiate the configuration header FILE
 
+Configuration files:
+$config_files
+
 Configuration headers:
 $config_headers
 
+Configuration commands:
+$config_commands
+
 Report bugs to <BUG-REPORT-ADDRESS>."
 
 _ACEOF
@@ -4466,15 +5671,18 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 FULL-PACKAGE-NAME config.status VERSION
-configured by $0, generated by GNU Autoconf 2.68,
+configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
 ac_pwd='$ac_pwd'
 srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
 test -n "\$AWK" || AWK=awk
 _ACEOF
 
@@ -4511,6 +5719,14 @@ do
     $as_echo "$ac_cs_config"; exit ;;
   --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
   --header | --heade | --head | --hea )
     $ac_shift
     case $ac_optarg in
@@ -4549,7 +5765,7 @@ fi
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
   shift
   \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
   CONFIG_SHELL='$SHELL'
@@ -4570,6 +5786,11 @@ _ASBOX
 
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
@@ -4579,6 +5800,8 @@ for ac_config_target in $ac_config_targets
 do
   case $ac_config_target in
     "src/config.h") CONFIG_HEADERS="$CONFIG_HEADERS src/config.h" ;;
+    "buildenv") CONFIG_FILES="$CONFIG_FILES buildenv" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
 
   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
@@ -4590,7 +5813,9 @@ done
 # We use the long form for the default assignment because of an extremely
 # bizarre bug on SunOS 4.1.3.
 if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
   test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
@@ -4620,6 +5845,164 @@ $debug ||
 } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
 ac_tmp=$tmp
 
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
 # Set up the scripts for CONFIG_HEADERS section.
 # No need to generate them if there are no CONFIG_HEADERS.
 # This happens for instance with `./config.status Makefile'.
@@ -4729,7 +6112,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 fi # test -n "$CONFIG_HEADERS"
 
 
-eval set X "    :H $CONFIG_HEADERS    "
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
 shift
 for ac_tag
 do
@@ -4858,7 +6241,96 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
 
   case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
 
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
   :H)
   #
   # CONFIG_HEADER
@@ -4882,11 +6354,144 @@ $as_echo "$as_me: $ac_file is unchanged" >&6;}
       && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
       || as_fn_error $? "could not create -" "$LINENO" 5
   fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
  ;;
 
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
   esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
 
+  esac
 done # for ac_tag