diff options
Diffstat (limited to 'pyparallel/parallel')
| -rw-r--r-- | pyparallel/parallel/__init__.py | 22 | ||||
| -rw-r--r-- | pyparallel/parallel/parallelppdev.py | 595 | ||||
| -rw-r--r-- | pyparallel/parallel/parallelutil.py | 124 | ||||
| -rw-r--r-- | pyparallel/parallel/parallelwin32.py | 139 |
4 files changed, 0 insertions, 880 deletions
diff --git a/pyparallel/parallel/__init__.py b/pyparallel/parallel/__init__.py deleted file mode 100644 index 54bdc35..0000000 --- a/pyparallel/parallel/__init__.py +++ /dev/null @@ -1,22 +0,0 @@ -#!/usr/bin/env python -#portable parallel port access with python -#this is a wrapper module for different platform implementations -# -# (C)2001-2002 Chris Liechti <cliechti@gmx.net> -# this is distributed under a free software license, see license.txt - -import sys, os, string -VERSION = "0.3" - -#chose an implementation, depending on os -if os.name == 'nt': - from parallelwin32 import * -elif os.name == 'posix': - if sys.platform == 'linux2': - from parallelppdev import * #linux, kernel 2.4 - else: - from parallelioctl import * #IOCTLs -elif os.name == 'java': - from paralleljava import * -else: - raise "Sorry no implementation for your platform available." diff --git a/pyparallel/parallel/parallelppdev.py b/pyparallel/parallel/parallelppdev.py deleted file mode 100644 index 9b831e8..0000000 --- a/pyparallel/parallel/parallelppdev.py +++ /dev/null @@ -1,595 +0,0 @@ -#!/usr/bin/env python -# parallel port access using the ppdev driver - -import sys -import struct -import fcntl -import os - -#---- -# Generated by h2py 0.1.1 from <linux/ppdev.h>, -# then cleaned up a bit by Michael P. Ashton and then a gain by chris ;-) -# Changes for Python2.2 support (c) September 2004 Alex.Perry@qm.com - - -def sizeof(type): return struct.calcsize(type) -def _IOC(dir, type, nr, size): return int((dir << _IOC_DIRSHIFT ) | (type << _IOC_TYPESHIFT ) |\ - (nr << _IOC_NRSHIFT ) | (size << _IOC_SIZESHIFT)) -def _IO(type, nr): return _IOC(_IOC_NONE, type, nr, 0) -def _IOR(type,nr,size): return _IOC(_IOC_READ, type, nr, sizeof(size)) -def _IOW(type,nr,size): return _IOC(_IOC_WRITE, type, nr, sizeof(size)) - -_IOC_SIZEBITS = 14 -_IOC_SIZEMASK = (1 << _IOC_SIZEBITS ) - 1 -_IOC_NRSHIFT = 0 -_IOC_NRBITS = 8 -_IOC_TYPESHIFT = _IOC_NRSHIFT + _IOC_NRBITS -_IOC_TYPEBITS = 8 -_IOC_SIZESHIFT = _IOC_TYPESHIFT + _IOC_TYPEBITS -IOCSIZE_MASK = _IOC_SIZEMASK << _IOC_SIZESHIFT -IOCSIZE_SHIFT = _IOC_SIZESHIFT - -# Python 2.2 uses a signed int for the ioctl() call, so ... -if ( sys.version_info[0] < 3 ) or ( sys.version_info[1] < 3 ): - _IOC_WRITE = 1 - _IOC_READ = -2 - _IOC_INOUT = -1 -else: - _IOC_WRITE = 1 - _IOC_READ = 2 - _IOC_INOUT = 3 - -_IOC_DIRSHIFT = _IOC_SIZESHIFT + _IOC_SIZEBITS -IOC_INOUT = _IOC_INOUT << _IOC_DIRSHIFT -IOC_IN = _IOC_WRITE << _IOC_DIRSHIFT -IOC_OUT = _IOC_READ << _IOC_DIRSHIFT - -_IOC_NONE = 0 -PP_IOCTL = ord('p') -PPCLAIM = _IO(PP_IOCTL, 0x8b) -PPCLRIRQ = _IOR(PP_IOCTL, 0x93, 'i') - -PPDATADIR = _IOW(PP_IOCTL, 0x90, 'i') -PPEXCL = _IO(PP_IOCTL, 0x8f) -PPFCONTROL = _IOW(PP_IOCTL, 0x8e, 'BB') -PPGETFLAGS = _IOR(PP_IOCTL, 0x9a, 'i') -PPGETMODE = _IOR(PP_IOCTL, 0x98, 'i') -PPGETMODES = _IOR(PP_IOCTL, 0x97, 'I') -PPGETPHASE = _IOR(PP_IOCTL, 0x99, 'i') -PPGETTIME = _IOR(PP_IOCTL, 0x95, 'll') -PPNEGOT = _IOW(PP_IOCTL, 0x91, 'i') -PPRCONTROL = _IOR(PP_IOCTL, 0x83, 'B') -PPRDATA = _IOR(PP_IOCTL, 0x85, 'B') -#'OBSOLETE__IOR' undefined in 'PPRECONTROL' -PPRELEASE = _IO(PP_IOCTL, 0x8c) -#'OBSOLETE__IOR' undefined in 'PPRFIFO' -PPRSTATUS = _IOR(PP_IOCTL, 0x81, 'B') -PPSETFLAGS = _IOW(PP_IOCTL, 0x9b, 'i') -PPSETMODE = _IOW(PP_IOCTL, 0x80, 'i') -PPSETPHASE = _IOW(PP_IOCTL, 0x94, 'i') -PPSETTIME = _IOW(PP_IOCTL, 0x96, 'll') -PPWCONTROL = _IOW(PP_IOCTL, 0x84, 'B') -PPWCTLONIRQ = _IOW(PP_IOCTL, 0x92, 'B') -PPWDATA = _IOW(PP_IOCTL, 0x86, 'B') -#'OBSOLETE__IOW' undefined in 'PPWECONTROL' -#'OBSOLETE__IOW' undefined in 'PPWFIFO' -#'OBSOLETE__IOW' undefined in 'PPWSTATUS' -PPYIELD = _IO(PP_IOCTL, 0x8d) -PP_FASTREAD = 1 << 3 -PP_FASTWRITE = 1 << 2 -PP_W91284PIC = 1 << 4 -PP_FLAGMASK = PP_FASTWRITE | PP_FASTREAD | PP_W91284PIC -PP_MAJOR = 99 -_ASMI386_IOCTL_H= None -_IOC_DIRBITS = 2 -_IOC_DIRMASK = (1 << _IOC_DIRBITS) - 1 -_IOC_NRMASK = (1 << _IOC_NRBITS) - 1 -_IOC_TYPEMASK = (1 << _IOC_TYPEBITS ) - 1 - -def _IOC_DIR(nr): return (nr >> _IOC_DIRSHIFT) & _IOC_DIRMASK -def _IOC_NR(nr): return (nr >> _IOC_NRSHIFT) & _IOC_NRMASK -def _IOC_SIZE(nr): return (nr >> _IOC_SIZESHIFT) & _IOC_SIZEMASK -def _IOC_TYPE(nr): return (nr >> _IOC_TYPESHIFT) & _IOC_TYPEMASK -def _IOWR(type, nr, size): return _IOC(_IOC_READ | _IOC_WRITE, type, nr , sizeof(size)) - -__ELF__ = 1 -__i386 = 1 -__i386__ = 1 -__linux = 1 -__linux__ = 1 -__unix = 1 -__unix__ = 1 -i386 = 1 -linux = 1 -unix = 1 - -#-------- Constants from <linux/parport.h> - -PARPORT_CONTROL_STROBE = 0x1 -PARPORT_CONTROL_AUTOFD = 0x2 -PARPORT_CONTROL_INIT = 0x4 -PARPORT_CONTROL_SELECT = 0x8 -PARPORT_STATUS_ERROR = 8 -PARPORT_STATUS_SELECT = 0x10 -PARPORT_STATUS_PAPEROUT = 0x20 -PARPORT_STATUS_ACK = 0x40 -PARPORT_STATUS_BUSY = 0x80 - -IEEE1284_MODE_NIBBLE = 0 -IEEE1284_MODE_BYTE = 1 -IEEE1284_MODE_COMPAT = 1<<8 -IEEE1284_MODE_BECP = 1<<9 -IEEE1284_MODE_ECP = 1<<4 -IEEE1284_MODE_ECPRLE = IEEE1284_MODE_ECP | (1<<5) -IEEE1284_MODE_ECPSWE = 1<<10 -IEEE1284_MODE_EPP = 1<<6 -IEEE1284_MODE_EPPSL = 1<<11 -IEEE1284_MODE_EPPSWE = 1<<12 -IEEE1284_DEVICEID = 1<<2 -IEEE1284_EXT_LINK = 1<<14 - -IEEE1284_ADDR = 1<<13 -IEEE1284_DATA = 0 - -PARPORT_EPP_FAST = 1 -PARPORT_W91284PIC = 2 -#---- - -class Parallel: - """Class for controlling the pins on a parallel port - - This class provides bit-level access to the pins on a PC parallel - port. It is primarily designed for programs which must control - special circuitry - most often non-IEEE-1284-compliant devices - other than printers - using 'bit-banging' techniques. - - The current implementation makes ioctl() calls to the Linux ppdev - driver, using the Python fcntl library. It might be rewritten in - C for extra speed. This particular implementation is written for - Linux; all of the upper-level calls can be ported to Windows as - well. - - On Linux, the ppdev device driver, from the Linux 2.4 parallel - port subsystem, is used to control the parallel port hardware. - This driver must be made available from a kernel compile. The - option is called "Support user-space parallel-port drivers". When - using the module, be sure to unload the lp module first: usually - the lp module claims exclusive access to the parallel port, and if - it is loaded, this class will fail to open the parallel port file, - and throw an exception. - - The primary source of information about the Linux 2.4 parallel - port subsystem is Tim Waugh's documentation, the source for which - is available in the kernel tree. This document (called, - appropriately enough, "The Linux 2.4 Parallel Port Subsystem"), - thoroughly describes the parallel port drivers and how to use - them. - - This class provides a method for each of the ioctls supported by - the ppdev module. The ioctl methods are named, in uppercase, the - same as the ioctls they invoke. The documentation for these - methods was taken directly from the documentation for their - corresponding ioctl, and modified only where necessary. - - Unless you have special reason to use the Linux ioctls, you should - use instead the upper-level functions, which are named in - lowerCase fashion and should be portable between Linux and - Windows. This way, any code you write for this class will (or - should) also work with the Windows version of this class. - - """ - def __init__(self, port = 0): - if type(port) == type(""): - self.device = port - else: - self.device = "/dev/parport%d" % port - self._fd = None - self._fd = os.open(self.device, os.O_RDWR) - try: - self.PPEXCL() - self.PPCLAIM() - self.setDataDir(1) - self.setData(0) - except IOError: - os.close(self._fd) - self._fd = None - raise - - def __del__(self): - if self._fd is not None: - self.PPRELEASE() - os.close(self._fd) - - def timevalToFloat(self, timeval): - t=struct.unpack('ll', timeval) - return t[0] + (t[1]/1000000.0) - - def floatToTimeval(self, time): - sec = int(time) - usec = int(time*1000000.0) - return struct.pack('ll', sec, usec) - - def PPCLAIM(self): - """ - Claims access to the port. As a user-land device driver - writer, you will need to do this before you are able to - actually change the state of the parallel port in any - way. Note that some operations only affect the ppdev driver - and not the port, such as PPSETMODE; they can be performed - while access to the port is not claimed. - """ - fcntl.ioctl(self._fd, PPCLAIM) - - def PPEXCL(self): - """ - Instructs the kernel driver to forbid any sharing of the port - with other drivers, i.e. it requests exclusivity. The PPEXCL - command is only valid when the port is not already claimed for - use, and it may mean that the next PPCLAIM ioctl will fail: - some other driver may already have registered itself on that - port. - - Most device drivers don't need exclusive access to the - port. It's only provided in case it is really needed, for - example for devices where access to the port is required for - extensive periods of time (many seconds). - - Note that the PPEXCL ioctl doesn't actually claim the port - there and then---action is deferred until the PPCLAIM ioctl is - performed. - """ - fcntl.ioctl(self._fd, PPEXCL) - - def PPRELEASE(self): - """ - Releases the port. Releasing the port undoes the effect of - claiming the port. It allows other device drivers to talk to - their devices (assuming that there are any). - """ - fcntl.ioctl(self._fd, PPRELEASE) - - def PPYIELD(self): - """ - Yields the port to another driver. This ioctl is a kind of - short-hand for releasing the port and immediately reclaiming - it. It gives other drivers a chance to talk to their devices, - but afterwards claims the port back. An example of using this - would be in a user-land printer driver: once a few characters - have been written we could give the port to another device - driver for a while, but if we still have characters to send to - the printer we would want the port back as soon as possible. - - It is important not to claim the parallel port for too long, - as other device drivers will have no time to service their - devices. If your device does not allow for parallel port - sharing at all, it is better to claim the parallel port - exclusively (see PPEXCL). - """ - fcntl.ioctl(self._fd, PPYIELD) - - def PPNEGOT(self, mode): - """ - Performs IEEE 1284 negotiation into a particular - mode. Briefly, negotiation is the method by which the host and - the peripheral decide on a protocol to use when transferring - data. - - An IEEE 1284 compliant device will start out in compatibility - mode, and then the host can negotiate to another mode (such as - ECP). - - The 'mode' parameter should be one of the following constants - from PPDEV: - - - IEEE1284_MODE_COMPAT - - IEEE1284_MODE_NIBBLE - - IEEE1284_MODE_BYTE - - IEEE1284_MODE_EPP - - IEEE1284_MODE_ECP - - The PPNEGOT ioctl actually does two things: it performs the - on-the-wire negotiation, and it sets the behaviour of - subsequent read/write calls so that they use that mode (but - see PPSETMODE). - """ - fcntl.ioctl(self._fd, PPNEGOT, struct.pack('i', mode)) - - def PPSETMODE(self, mode): - """ - Sets which IEEE 1284 protocol to use for the read and write - calls. - - The 'mode' parameter should be one of the following constants - from PPDEV: - - - IEEE1284_MODE_COMPAT - - IEEE1284_MODE_NIBBLE - - IEEE1284_MODE_BYTE - - IEEE1284_MODE_EPP - - IEEE1284_MODE_ECP - """ - fcntl.ioctl(self._fd, PPSETMODE, struct.pack('i', mode)) - - def PPGETMODE(self): - """ - Retrieves the IEEE 1284 mode being used for read and - write. The return value is one of the following constants - from PPDEV: - - - IEEE1284_MODE_COMPAT - - IEEE1284_MODE_NIBBLE - - IEEE1284_MODE_BYTE - - IEEE1284_MODE_EPP - - IEEE1284_MODE_ECP - """ - ret = struct.pack('i', 0) - ret = fcntl.ioctl(self._fd, PPGETMODE, ret) - return struct.unpack('i', ret)[0] - - def PPGETTIME(self): - """ - Retrieves the time-out value. The read and write calls will - time out if the peripheral doesn't respond quickly enough. The - PPGETTIME ioctl retrieves the length of time that the - peripheral is allowed to have before giving up. - - Returns the timeout value in seconds as a floating-point value. - """ - ret = struct.pack('ll', 0, 0) - ret = fcntl.ioctl(self._fd, PPGETTIME, ret) - return timevalToFloat(ret) - - def PPSETTIME(self, time): - """ - Sets the time-out (see PPGETTIME for more information). - 'time' is the new time-out in seconds; floating-point values - are acceptable. - """ - fcntl.ioctl(self._fd, PPSETTIME, floatToTimeval(time)) - - def PPGETMODES(self): - """ - Retrieves the capabilities of the hardware (i.e. the modes - field of the parport structure). - """ - raise NotImplementedError - - def PPSETFLAGS(self): - """ - Sets flags on the ppdev device which can affect future I/O - operations. Available flags are: - - - PP_FASTWRITE - - PP_FASTREAD - - PP_W91284PIC - """ - raise NotImplementedError - - def PPWCONTROL(self, lines): - """ - Sets the control lines. The 'lines' parameter is a bitwise OR - of the following constants from PPDEV: - - - PARPORT_CONTROL_STROBE - - PARPORT_CONTROL_AUTOFD - - PARPORT_CONTROL_INIT - - PARPORT_CONTROL_SELECT - """ - fcntl.ioctl(self._fd, PPWCONTROL, struct.pack('B', lines)) - - def PPRCONTROL(self): - """ - Returns the last value written to the control register, in the - form of an integer, for which each bit corresponds to a control - line (although some are unused). - - This doesn't actually touch the hardware; the last value - written is remembered in software. This is because some - parallel port hardware does not offer read access to the - control register. - - The control lines bits are defined by the following constants - from PPDEV: - - - PARPORT_CONTROL_STROBE - - PARPORT_CONTROL_AUTOFD - - PARPORT_CONTROL_SELECT - - PARPORT_CONTROL_INIT - """ - ret = struct.pack('B',0) - ret = fcntl.ioctl(self._fd, PPRCONTROL, ret) - return struct.unpack('B', ret)[0] - - def PPFCONTROL(self, mask, val): - """ - Frobs the control lines. Since a common operation is to change - one of the control signals while leaving the others alone, it - would be quite inefficient for the user-land driver to have to - use PPRCONTROL, make the change, and then use PPWCONTROL. Of - course, each driver could remember what state the control - lines are supposed to be in (they are never changed by - anything else), but in order to provide PPRCONTROL, ppdev must - remember the state of the control lines anyway. - - The PPFCONTROL ioctl is for "frobbing" control lines, and is - like PPWCONTROL but acts on a restricted set of control - lines. The ioctl parameter is a pointer to a struct - ppdev_frob_struct: - - struct ppdev_frob_struct { - unsigned char mask; - unsigned char val; - }; - - The mask and val fields are bitwise ORs of control line names - (such as in PPWCONTROL). The operation performed by PPFCONTROL - is: - - new_ctr = (old_ctr & ~mask) | val - - In other words, the signals named in mask are set to the - values in val. - """ - fcntl.ioctl(self._fd, PPFCONTROL, struct.pack('BB', mask, val)) - - def PPRSTATUS(self): - """ - Returns an unsigned char containing bits set for each status - line that is set (for instance, PARPORT_STATUS_BUSY). The - ioctl parameter should be a pointer to an unsigned char. - """ - ret = struct.pack('B',0) - ret = fcntl.ioctl(self._fd, PPRSTATUS, ret) - return struct.unpack('B', ret)[0] - - def PPDATADIR(self, out): - """ - Controls the data line drivers. Normally the computer's - parallel port will drive the data lines, but for byte-wide - transfers from the peripheral to the host it is useful to turn - off those drivers and let the peripheral drive the - signals. (If the drivers on the computer's parallel port are - left on when this happens, the port might be damaged.) - This is only needed in conjunction with PPWDATA or PPRDATA. - - The 'out' parameter indicates the desired port direction. If - 'out' is true or non-zero, the drivers are turned on (forward - direction); otherwise, the drivers are turned off (reverse - direction). - """ - if out: - msg=struct.pack('i',0) - else: - msg=struct.pack('i',1) - fcntl.ioctl(self._fd, PPDATADIR, msg) - - def PPWDATA(self, byte): - """ - Sets the data lines (if in forward mode). The ioctl parameter - is a pointer to an unsigned char. - """ - fcntl.ioctl(self._fd, PPWDATA,struct.pack('B',byte)) - - def PPRDATA(self): - """ - Reads the data lines (if in reverse mode). The ioctl parameter - is a pointer to an unsigned char. - """ - ret=struct.pack('B',0) - ret=fcntl.ioctl(self._fd, PPRDATA,ret) - return struct.unpack('B',ret)[0] - - def PPCLRIRQ(self): - """ - Returns the current interrupt count, and clears it. The ppdev - driver keeps a count of interrupts as they are triggered. - """ - ret=struct.pack('i',0) - ret=fcntl.ioctl(self._fd, PPCLRIRQ,ret) - return struct.unpack('i',ret)[0] - - def PPWCTLONIRQ(self, lines): - """ - Set a trigger response. Afterwards when an interrupt is - triggered, the interrupt handler will set the control lines as - requested. The ioctl parameter is a pointer to an unsigned - char, which is interpreted in the same way as for PPWCONTROL. - - The reason for this ioctl is simply speed. Without this ioctl, - responding to an interrupt would start in the interrupt - handler, switch context to the user-land driver via poll or - select, and then switch context back to the kernel in order to - handle PPWCONTROL. Doing the whole lot in the interrupt - handler is a lot faster. - """ - fcntl.ioctl(self._fd, PPWCTLONIRQ,struct.pack('B',lines)) - - #data lines -## def data(self): -## """Returns the states of the data bus line drivers (pins 2-9)""" -## return self._data - - def setDataDir(self,out): - """Activates or deactivates the data bus line drivers (pins 2-9)""" - self._dataDir = out - self.PPDATADIR(out) - - def dataDir(self): - """Returns true if the data bus line drivers are on (pins 2-9)""" - return self._dataDir - - #control lines -## def strobe(self): -## """Returns the state of the nStrobe output (pin 1)""" -## return (self.PPRCONTROL()&PARPORT_CONTROL_STROBE)==0 - - def setDataStrobe(self, level): - """Sets the state of the nStrobe output (pin 1)""" - if level: - self.PPFCONTROL(PARPORT_CONTROL_STROBE, 0) - else: - self.PPFCONTROL(PARPORT_CONTROL_STROBE, PARPORT_CONTROL_STROBE) - -## def autoFd(self): -## """Returns the state of the nAutoFd output (pin 14)""" -## return (self.PPRCONTROL()&PARPORT_CONTROL_AUTOFD)==0 - - def setAutoFeed(self, level): - """Sets the state of the nAutoFd output (pin 14)""" - if level: - self.PPFCONTROL(PARPORT_CONTROL_AUTOFD, 0) - else: - self.PPFCONTROL(PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD) - -## def init(self): -## """Returns the state of the nInit output (pin 16)""" -## return (self.PPRCONTROL()&PARPORT_CONTROL_INIT)!=0 - - def setInitOut(self, level): - """Sets the state of the nInit output (pin 16)""" - if level: - self.PPFCONTROL(PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT) - else: - self.PPFCONTROL(PARPORT_CONTROL_INIT, 0) - -## def selectIn(self): -## """Returns the state of the nSelectIn output (pin 17)""" -## return (self.PPRCONTROL()&PARPORT_CONTROL_SELECT)==0 - - def setSelect(self,level): - """Sets the state of the nSelectIn output (pin 17)""" - if level: - self.PPFCONTROL(PARPORT_CONTROL_SELECT, 0) - else: - self.PPFCONTROL(PARPORT_CONTROL_SELECT, PARPORT_CONTROL_SELECT) - - def setData(self,d): - """Sets the states of the data bus line drivers (pins 2-9)""" - self._data=d - return self.PPWDATA(d) - - def getData(self): - """Gets the states of the data bus line (pin 2-9)""" - return self.PPRDATA() - - # status lines - def getInError(self): - """Returns the level on the nFault pin (15)""" - return (self.PPRSTATUS() & PARPORT_STATUS_ERROR) != 0 - - def getInSelected(self): - """Returns the level on the Select pin (13)""" - return (self.PPRSTATUS() & PARPORT_STATUS_SELECT) != 0 - - def getInPaperOut(self): - """Returns the level on the paperOut pin (12)""" - return (self.PPRSTATUS() & PARPORT_STATUS_PAPEROUT) != 0 - - def getInAcknowledge(self): - """Returns the level on the nAck pin (10)""" - return (self.PPRSTATUS() & PARPORT_STATUS_ACK) != 0 - - def getInBusy(self): - """Returns the level on the Busy pin (11)""" - return (self.PPRSTATUS() & PARPORT_STATUS_BUSY) == 0 - diff --git a/pyparallel/parallel/parallelutil.py b/pyparallel/parallel/parallelutil.py deleted file mode 100644 index 036028e..0000000 --- a/pyparallel/parallel/parallelutil.py +++ /dev/null @@ -1,124 +0,0 @@ -class BitaccessMeta(type): - """meta class that adds bit access properties to a - parallel port implementation""" - - def __new__(self, classname, bases, classdict): - klass = type.__new__(self, classname, bases, classdict) - # status lines - klass.paperOut = property(klass.getInPaperOut, None, "Read the PaperOut signal") - # control lines - klass.dataStrobe = property(None, klass.setDataStrobe, "Set the DataStrobe signal") - # XXX ... other bits - # data bits - for bit in range(8): - mask = (1<<bit) - def getter(self, mask=mask): - return (self.getData() & mask) != 0 - def setter(self, b, mask=mask): - if b: - self.setData(self.getData() | mask) - else: - self.setData(self.getData() & ~mask) - setattr(klass, "D%d" % bit, property(getter, setter, "Access databit %d" % bit)) - # nibbles - for name, shift, width in [('D0_D3', 0, 4), ('D4_D7', 4, 4)]: - mask = (1<<width) - 1 - def getter(self, shift=shift, mask=mask): - return (self.getData() >> shift) & mask - def setter(self, b, shift=shift, mask=mask): - self.setData((self.getData() & ~(mask<<shift)) | ((b&mask) << shift)) - setattr(klass, name, property(getter, setter, "Access to %s" % name)) - return klass - -class VirtualParallelPort: - """provides a virtual parallel port implementation, useful - for tests and simulations without real hardware""" - - __metaclass__ = BitaccessMeta - - def __init__(self, port=None): - self._data = 0 - - def setData(self, value): - self._data = value - - def getData(self): - return self._data - - # inputs return dummy value - def getInPaperOut(self): return self._dummy - # ... - # outputs just store a tuple with (action, value) pair - def setDataStrobe(self, value): self._last = ('setDataStrobe', value) - # ... - -# testing -if __name__ == '__main__': - import unittest, sys - - class TestBitaccess(unittest.TestCase): - """Tests a port with no timeout""" - def setUp(self): - self.p = VirtualParallelPort() - - def testDatabits(self): - """bit by bit D0..D7""" - p = self.p - p.D0 = p.D2 = p.D4 = p.D6 = 1 - self.failUnlessEqual(p._data, 0x55) - self.failUnlessEqual( - [p.D7, p.D6, p.D5, p.D4, p.D3, p.D2, p.D1, p.D0], - [0, 1, 0, 1, 0, 1, 0, 1] - ) - p._data <<= 1 - self.failUnlessEqual( - [p.D7, p.D6, p.D5, p.D4, p.D3, p.D2, p.D1, p.D0], - [1, 0, 1, 0, 1, 0, 1, 0] - ) - - def testDatabitsGroups(self): - """nibbles D0..D7""" - p = self.p - p.D0_D3 = 14 - self.failUnlessEqual(p._data, 0x0e) - p.D0_D3 = 0 - p.D4_D7 = 13 - self.failUnlessEqual(p._data, 0xd0) - p.D0_D3 = p.D4_D7 = 0xa - self.failUnlessEqual(p._data, 0xaa) - # test bit patterns - for x in range(256): - # test getting - p._data = x - self.failUnlessEqual((p.D4_D7, p.D0_D3), (((x>>4) & 0xf), (x & 0xf))) - # test setting - p._data = 0 - (p.D4_D7, p.D0_D3) = (((x>>4) & 0xf), (x & 0xf)) - self.failUnlessEqual(p._data, x) - - def testStatusbits(self): - """bit by bit status lines""" - # read the property: - self.p._dummy = 0 - self.failUnlessEqual(self.p.paperOut, 0) - - self.p._dummy = 1 - self.failUnlessEqual(self.p.paperOut, 1) - - # read only, must not be writable: - self.failUnlessRaises(AttributeError, setattr, self.p, 'paperOut', 1) - - def testControlbits(self): - """bit by bit control lines""" - self.p.dataStrobe = 0 - self.failUnlessEqual(self.p._last, ('setDataStrobe', 0)) - self.p.dataStrobe = 1 - self.failUnlessEqual(self.p._last, ('setDataStrobe', 1)) - - # write only, must not be writable: - self.failUnlessRaises(AttributeError, getattr, self.p, 'dataStrobe') - - sys.argv.append('-v') - # When this module is executed from the command-line, it runs all its tests - unittest.main() - diff --git a/pyparallel/parallel/parallelwin32.py b/pyparallel/parallel/parallelwin32.py deleted file mode 100644 index c8f0d23..0000000 --- a/pyparallel/parallel/parallelwin32.py +++ /dev/null @@ -1,139 +0,0 @@ -#pyparallel driver for win32 -#see __init__.py -# -#(C) 2002 Chris Liechti <cliechti@gmx.net> -# this is distributed under a free software license, see license.txt -# -# thanks to Dincer Aydin dinceraydin@altavista.net for his work on the -# winioport module: www.geocities.com/dinceraydin/ the graphic below is -# borrowed form him ;-) - - -# LPT1 = 0x0378 or 0x03BC -# LPT2 = 0x0278 or 0x0378 -# LPT3 = 0x0278 -# -# Data Register (base + 0) ........ outputs -# -# 7 6 5 4 3 2 1 0 -# . . . . . . . * D0 ........... (pin 2), 1=High, 0=Low (true) -# . . . . . . * . D1 ........... (pin 3), 1=High, 0=Low (true) -# . . . . . * . . D2 ........... (pin 4), 1=High, 0=Low (true) -# . . . . * . . . D3 ........... (pin 5), 1=High, 0=Low (true) -# . . . * . . . . D4 ........... (pin 6), 1=High, 0=Low (true) -# . . * . . . . . D5 ........... (pin 7), 1=High, 0=Low (true) -# . * . . . . . . D6 ........... (pin 8), 1=High, 0=Low (true) -# * . . . . . . . D7 ........... (pin 9), 1=High, 0=Low (true) -# -# Status Register (base + 1) ...... inputs -# -# 7 6 5 4 3 2 1 0 -# . . . . . * * * Undefined -# . . . . * . . . Error ........ (pin 15), high=1, low=0 (true) -# . . . * . . . . Selected ..... (pin 13), high=1, low=0 (true) -# . . * . . . . . No paper ..... (pin 12), high=1, low=0 (true) -# . * . . . . . . Ack .......... (pin 10), high=1, low=0 (true) -# * . . . . . . . Busy ......... (pin 11), high=0, low=1 (inverted) -# -# ctrl Register (base + 2) ..... outputs -# -# 7 6 5 4 3 2 1 0 -# . . . . . . . * Strobe ....... (pin 1), 1=low, 0=high (inverted) -# . . . . . . * . Auto Feed .... (pin 14), 1=low, 0=high (inverted) -# . . . . . * . . Initialize ... (pin 16), 1=high,0=low (true) -# . . . . * . . . Select ....... (pin 17), 1=low, 0=high (inverted) -# * * * * . . . . Unused - -LPT1 = 0 -LPT2 = 1 - -LPT1_base = 0x0378 -LPT2_base = 0x0278 - -import ctypes -import os -#need to patch PATH so that the DLL can be found and loaded -os.environ['PATH'] = os.environ['PATH'] + ';' + os.path.abspath(os.path.dirname(__file__)) -#fake module, names of the functions are the same as in the old _pyparallel -#python extension in earlier versions of this modules -_pyparallel = ctypes.windll.simpleio -#need to initialize giveio on WinNT based systems -if _pyparallel.init(): - raise IOError('Could not access the giveio driver which is required on NT based systems.') - - -class Parallel: - def __init__(self, port = LPT1): - if port == LPT1: - self.dataRegAdr = LPT1_base - elif port == LPT2: - self.dataRegAdr = LPT2_base - else: - raise ValueError("No such port available - expecting a number") - self.statusRegAdr = self.dataRegAdr + 1 - self.ctrlRegAdr = self.dataRegAdr + 2 - self.ctrlReg = _pyparallel.inp(self.ctrlRegAdr) - - def setData(self, value): - _pyparallel.outp(self.dataRegAdr, value) - - def setDataDir( self, level): - """set for port as input, clear for output""" - if level: - self.ctrlReg |= 0x20 - else: - self.ctrlReg &= ~0x20 - _pyparallel.outp(self.ctrlRegAdr, self.ctrlReg) - - # control register output functions - def setDataStrobe(self, level): - """data strobe bit""" - if level: - self.ctrlReg = self.ctrlReg & ~0x01 - else: - self.ctrlReg = self.ctrlReg | 0x01 - _pyparallel.outp(self.ctrlRegAdr, self.ctrlReg) - - def setAutoFeed(self, level): - """auto feed bit""" - if level: - self.ctrlReg = self.ctrlReg & ~0x02 - else: - self.ctrlReg = self.ctrlReg | 0x02 - _pyparallel.outp(self.ctrlRegAdr, self.ctrlReg) - - def setInitOut(self, level): - """initialize bit""" - if level: - self.ctrlReg = self.ctrlReg | 0x04 - else: - self.ctrlReg = self.ctrlReg & ~0x04 - _pyparallel.outp(self.ctrlRegAdr, self.ctrlReg) - - def setSelect(self, level): - """select bit""" - if level: - self.ctrlReg = self.ctrlReg & ~0x08 - else: - self.ctrlReg = self.ctrlReg | 0x08 - _pyparallel.outp(self.ctrlRegAdr, self.ctrlReg) - - def getInError(self): - """Error pin""" - return _pyparallel.inp(self.statusRegAdr) & 0x08 and 1 - - def getInSelected(self): - """select pin""" - return _pyparallel.inp(self.statusRegAdr) & 0x10 and 1 - - def getInPaperOut(self): - """paper out pin""" - return _pyparallel.inp(self.statusRegAdr) & 0x20 and 1 - - def getInAcknowledge(self): - """Acknowledge pin""" - return _pyparallel.inp(self.statusRegAdr) & 0x40 and 1 - - def getInBusy(self): - """input from busy pin""" - return not (_pyparallel.inp(self.statusRegAdr) & 0x80) |