diff options
Diffstat (limited to 'cpp/xml/cluster.xml')
| -rw-r--r-- | cpp/xml/cluster.xml | 339 |
1 files changed, 0 insertions, 339 deletions
diff --git a/cpp/xml/cluster.xml b/cpp/xml/cluster.xml deleted file mode 100644 index 09434ea37b..0000000000 --- a/cpp/xml/cluster.xml +++ /dev/null @@ -1,339 +0,0 @@ -<?xml version="1.0"?> -<!-- -- -- Licensed to the Apache Software Foundation (ASF) under one -- or more contributor license agreements. See the NOTICE file -- distributed with this work for additional information -- regarding copyright ownership. The ASF licenses this file -- to you under the Apache License, Version 2.0 (the -- "License"); you may not use this file except in compliance -- with the License. You may obtain a copy of the License at -- -- http://www.apache.org/licenses/LICENSE-2.0 -- -- Unless required by applicable law or agreed to in writing, -- software distributed under the License is distributed on an -- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -- KIND, either express or implied. See the License for the -- specific language governing permissions and limitations -- under the License. -- ---> - -<!-- -- NOTE: if you make changes to this XML you must update CLUSTER_VERSION -- in src/qpid/cluster/Cluster.cpp ---> - -<amqp major="0" minor="10" port="5672"> - - <!-- Controls sent between cluster nodes. --> - - <class name = "cluster" code = "0x80" label="Qpid clustering extensions."> - <doc>Qpid extension class to allow clustered brokers to communicate.</doc> - - <!-- New joiner requests an update to url. --> - <control name="update-request" code="0x1"> - <field name="url" type="str16"/> - </control> - - <!-- Sender offers an update to a new joiner. --> - <control name = "update-offer" code="0x2"> - <field name="updatee" type="uint64"/> - </control> - - <!-- Sender retracts an offer to a new joiner. --> - <control name = "retract-offer" code="0x3"> - <field name="updatee" type="uint64"/> - </control> - - <!-- Possible states for persistent store --> - <domain name="store-state" type="uint8"> - <enum> - <choice name="no-store" value="0"/> - <choice name="empty-store" value="1"/> - <choice name="clean-store" value="2"/> - <choice name="dirty-store" value="3"/> - </enum> - </domain> - - <!-- Status exchanged when new members join the cluster. --> - <control name="initial-status" code="0x5"> - <field name="version" type="uint32"/> - <field name="active" type="bit"/> - <field name="cluster-id" type="uuid"/>> - <field name="store-state" type="store-state"/> - <field name="shutdown-id" type="uuid"/> - <field name="first-config" type="str16"/> - <field name="urls" type="array"/> <!-- Array of str16 --> - </control> - - <!-- New member or updater is ready as an active member. --> - <control name="ready" code="0x10"> - <field name="url" type="str16"/> - </control> - - <control name="config-change" code="0x11" label="Raw cluster membership."> - <field name="members" type="vbin16"/> <!-- packed member-id array --> - <field name="joined" type="vbin16"/> <!-- packed member-id array --> - <field name="left" type="vbin16"/> <!-- packed member-id array --> - </control> - - <domain name="error-type" type="uint8" label="Types of error"> - <enum> - <choice name="none" value="0"/> - <choice name="session" value="1"/> - <choice name="connection" value="2"/> - </enum> - </domain> - - <!-- Check for error consistency across the cluster --> - <control name="error-check" code="0x14"> - <field name="type" type="error-type"/> - <field name="frame-seq" type="sequence-no"/> - </control> - - <!-- Synchronize timer tasks across the cluster --> - <control name="timer-wakeup" code="0x15"> - <field name="name" type="str16"/> - </control> - - <control name="timer-drop" code="0x16"> - <field name="name" type="str16"/> - </control> - - <!-- Shut down the entire cluster --> - <control name="shutdown" code="0x20"> - <field name="shutdown-id" type="uuid"/> - </control> - - <!-- Deliver a message to a queue --> - <control name="deliver-to-queue" code="0x21"> - <field name="queue" type="str16"/> - <field name="message" type="vbin32"/> - </control> - - <!-- Update the cluster time --> - <control name="clock" code="0x22"> - <field name="time" type="uint64"/> - </control> - - </class> - - <!-- Controls associated with a specific connection. --> - - <class name="cluster-connection" code="0x81" label="Qpid clustering extensions."> - - <!-- Announce a new connection --> - <control name="announce" code="0x1"> - <field name="management-id" type="str16"/> - <!-- Security Strength Factor (ssf): if the transport provides - encryption (e.g. ssl), ssf is the bit length of the key. Zero if no - encryption provided. --> - <field name="ssf" type="uint32"/> - <!-- external auth id (e.g. ssl client certificate id) --> - <field name="authid" type="str16"/> - <!-- exclude certain sasl mechs, used with ssl and sasl-external --> - <field name="nodict" type="bit"/> - <!-- User name as negotiated by SASL --> - <field name="username" type="str32"/> - <!-- Frames forming the initial connection negotiation. --> - <field name="initial-frames" type="str32"/> - </control> - - <!-- Marks the cluster-wide point when a connection is considered closed. --> - <control name="deliver-close" code="0x2"/> - - <!-- Permission to generate output up to the limit. --> - <control name="deliver-do-output" code="0x3"> - <field name="limit" type="uint32"/> - </control> - - <!-- Abort a connection that is sending invalid data. --> - <control name="abort" code="0x4"/> - - <!-- Update controls. Sent to a new broker in joining mode. - A connection is updated as followed: - - send the shadow's management ID in shadow-perpare on the update connection - - open the shadow as a normal connection. - - attach sessions, create consumers, set flow with normal AMQP cokmmands. - - send /reset additional session state with controls below. - - send shadow-ready to mark end of shadow update. - - send membership when entire update is complete. - --> - <!-- Send the user-id for an update connection. --> - <control name="shadow-set-user" code="0x0E"> - <field name="user-id" type="str16"/> - </control> - - <!-- Prepare to send a shadow connection with the given ID. --> - <control name="shadow-prepare" code="0x0F"> - <field name="management-id" type="str16"/> - </control> - - <!-- Consumer state that cannot be set by standard AMQP controls. --> - <control name="consumer-state" code="0x10"> - <field name="name" type="str8"/> - <field name="blocked" type="bit"/> - <field name="notifyEnabled" type="bit"/> - <field name="position" type="sequence-no"/> - <field name="used-msg-credit" type="uint32"/> - <field name="used-byte-credit" type="uint32"/> - <field name="deliveryCount" type="uint32"/> - </control> - - <!-- Delivery-record for outgoing messages sent but not yet accepted. --> - <control name="delivery-record" code ="0x11"> - <field name="queue" type="str8"/> - <field name="position" type="sequence-no"/> - <field name="tag" type="str8"/> - <field name="id" type="sequence-no"/> - <field name="acquired" type="bit"/> <!--If not set, message is on update queue. --> - <field name="accepted" type="bit"/> - <field name="cancelled" type="bit"/> - <field name="completed" type="bit"/> - <field name="ended" type="bit"/> - <field name="windowing" type="bit"/> - <field name="enqueued" type="bit"/> - <field name="credit" type="uint32"/> - </control> - - <!-- Tx transaction state. --> - <control name="tx-start" code="0x12"/> - <control name="tx-accept" code="0x13"> <field name="commands" type="sequence-set"/> </control> - <control name="tx-dequeue" code="0x14"> <field name="queue" type="str8"/> </control> - <control name="tx-enqueue" code="0x15"> <field name="queue" type="str8"/> </control> - <control name="tx-publish" code="0x16"> - <field name="queues" type="array"/> <!--Array of str8 --> - <field name="delivered" type="bit"/> - </control> - <control name="tx-end" code="0x17"/> - <control name="accumulated-ack" code="0x18"> <field name="commands" type="sequence-set"/> </control> - - <!-- Consumers in the connection's output task --> - <control name="output-task" code="0x19"> - <field name="channel" type="uint16"/> - <field name="name" type="str8"/> - </control> - - <!-- Dtx transaction state. --> - <control name="dtx-start" code="0x1A"> - <field name="xid" type="str16"/> - <field name="ended" type="bit"/> - <field name="suspended" type="bit"/> - <field name="failed" type="bit"/> - <field name="expired" type="bit"/> - </control> - <control name="dtx-end" code="0x1B"/> - - <control name="dtx-ack" code="0x1C"/> - - <control name="dtx-buffer-ref" code="0x1D"> - <field name="xid" type="str16"/> - <field name="index" type="uint32"/> - <field name="suspended" type="bit"/> - </control> - - <control name="dtx-work-record" code="0x1E"> - <field name="xid" type="str16"/> - <field name="prepared" type="bit"/> - <field name="timeout" type="uint32"/> - </control> - - <!-- Complete a session state update. --> - <control name="session-state" code="0x1F"> - <!-- Target session deduced from channel number. --> - <field name="replay-start" type="sequence-no"/> <!-- Replay frames will start from this point.--> - <field name="command-point" type="sequence-no"/> <!-- Id of next command sent --> - <field name="sent-incomplete" type="sequence-set"/> <!-- Commands sent and incomplete. --> - - <field name="expected" type="sequence-no"/> <!-- Next command expected. --> - <field name="received" type="sequence-no"/> <!-- Received up to here (>= expected) --> - <field name="unknown-completed" type="sequence-set"/> <!-- Completed but not known to peer. --> - <field name="received-incomplete" type="sequence-set"/> <!-- Received and incomplete --> - <field name="dtx-selected" type="bit"/> - </control> - - <!-- Complete a shadow connection update. --> - <control name="shadow-ready" code="0x20" label="End of shadow connection update."> - <field name="member-id" type="uint64"/> - <field name="connection-id" type="uint64"/> - <field name="management-id" type="str16"/> - <field name="user-name" type="str8"/> - <field name="fragment" type="str32"/> - <field name="send-max" type="uint32"/> - </control> - - <!-- Complete a cluster state update. --> - <control name="membership" code="0x21" label="Cluster membership details."> - <field name="joiners" type="map"/> <!-- member-id -> URL --> - <field name="members" type="map"/> <!-- member-id -> state --> - <field name="frame-seq" type="sequence-no"/> <!-- frame sequence number --> - </control> - - <!-- Updater cannot fulfill an update offer. --> - <control name = "retract-offer" code="0x22"/> - - <!-- Set the position of a replicated queue. --> - <control name="queue-position" code="0x30"> - <field name="queue" type="str8"/> - <field name="position" type="sequence-no"/> - </control> - - <!-- Replicate encoded exchanges/queues. --> - <control name="exchange" code="0x31"><field name="encoded" type="str32"/></control> - - <!-- Add a listener to a queue --> - <control name="add-queue-listener" code="0x34"> - <field name="queue" type="str8"/> - <field name="consumer" type="uint32"/> - </control> - - <!-- added by jrd. propagate a management-setup-state widget --> - <control name="management-setup-state" code="0x36"> - <field name="objectNum" type="uint64"/> - <field name="bootSequence" type="uint16"/> - <field name="broker-id" type="uuid"/> - <field name="vendor" type="str32"/> - <field name="product" type="str32"/> - <field name="instance" type="str32"/> - </control> - - <!-- Replicate encoded config objects - e.g. links and bridges. --> - <control name="config" code="0x37"><field name="encoded" type="str32"/></control> - - <!-- Set the fairshare delivery related state of a replicated queue. --> - <control name="queue-fairshare-state" code="0x38"> - <field name="queue" type="str8"/> - <field name="position" type="uint8"/> - <field name="count" type="uint8"/> - </control> - - <!-- Replicate a QueueObserver for a given queue. --> - <control name="queue-observer-state" code="0x39"> - <field name="queue" type="str8"/> - <field name="observer-id" type="str8"/> - <field name="state" type="map"/> <!-- "name"=value --> - </control> - - <!-- Update the cluster time --> - <control name="clock" code="0x40"> - <field name="time" type="uint64"/> - </control> - - <!-- Update a queue's dequeue rate --> - <control name="queue-dequeue-since-purge-state" code="0x41"> - <field name="queue" type="str8"/> - <field name="dequeueSincePurge" type="uint32"/> - </control> - - <!-- Replicate the internal state for an object - e.g. Links, bridges, etc --> - <control name="internal-state" code="0x42"> - <field name="type" type="str8"/> <!-- The type of object the state is for (e.g. 'link') --> - <field name="name" type="str8"/> <!-- Identifies the particular object to be updated --> - <field name="state" type="map"/> <!-- The internal state for the object --> - </control> - - </class> - -</amqp> |