diff options
Diffstat (limited to 'qpid/cpp/bindings/qpid/dotnet/examples')
48 files changed, 4345 insertions, 0 deletions
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.receiver/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.receiver/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..abe35cf053 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.receiver/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.direct.receiver")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.direct.receiver")]
+[assembly: AssemblyCopyright("Copyright © 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("c60b17ab-a82c-4edf-ba95-1e88bd4c3e75")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.receiver/csharp.direct.receiver.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.receiver/csharp.direct.receiver.cs new file mode 100644 index 0000000000..592a05ab29 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.receiver/csharp.direct.receiver.cs @@ -0,0 +1,79 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using Org.Apache.Qpid.Messaging;
+
+namespace CSharpDirect
+{
+ class Program
+ {
+ // Direct receiver example
+ //
+ // Receive 10 messages from localhost:5672, amq.direct/key
+ // Messages are assumed to be printable strings.
+ //
+ static int Main(string[] args)
+ {
+ String host = "localhost:5672";
+ String addr = "amq.direct/key";
+ Int32 nMsg = 10;
+
+ if (args.Length > 0)
+ host = args[0];
+ if (args.Length > 1)
+ addr = args[1];
+ if (args.Length > 2)
+ nMsg = Convert.ToInt32(args[2]);
+
+ Console.WriteLine("csharp.direct.receiver");
+ Console.WriteLine("host : {0}", host);
+ Console.WriteLine("addr : {0}", addr);
+ Console.WriteLine("nMsg : {0}", nMsg);
+ Console.WriteLine();
+
+ Connection connection = null;
+ try
+ {
+ connection = new Connection(host);
+ connection.Open();
+ if (!connection.IsOpen) {
+ Console.WriteLine("Failed to open connection to host : {0}", host);
+ } else {
+ Session session = connection.CreateSession();
+ Receiver receiver = session.CreateReceiver(addr);
+ Message message = new Message("");
+ for (int i = 0; i < nMsg; i++) {
+ Message msg2 = receiver.Fetch(DurationConstants.FORVER);
+ Console.WriteLine("Rcvd msg {0} : {1}", i, msg2.GetContent());
+ }
+ connection.Close();
+ return 0;
+ }
+ } catch (Exception e) {
+ Console.WriteLine("Exception {0}.", e);
+ if (null != connection)
+ connection.Close();
+ }
+ return 1;
+ }
+ }
+}
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.receiver/csharp.direct.receiver.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.receiver/csharp.direct.receiver.csproj new file mode 100644 index 0000000000..34d79afa91 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.receiver/csharp.direct.receiver.csproj @@ -0,0 +1,102 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{52F880E7-D677-4C91-8516-D679CE0F46A8}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.direct.receiver</RootNamespace>
+ <AssemblyName>csharp.direct.receiver</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.direct.receiver.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.sender/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.sender/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..18502a0666 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.sender/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.direct.sender")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.direct.sender")]
+[assembly: AssemblyCopyright("Copyright © 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("19ce67e4-db90-4480-88c4-3721f47634c7")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.sender/csharp.direct.sender.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.sender/csharp.direct.sender.cs new file mode 100644 index 0000000000..a0ac742a45 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.sender/csharp.direct.sender.cs @@ -0,0 +1,80 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using Org.Apache.Qpid.Messaging;
+
+namespace csharp.direct.sender
+{
+ class Program
+ {
+ // Direct sender example
+ //
+ // Send 10 messages from localhost:5672, amq.direct/key
+ // Messages are assumed to be printable strings.
+ //
+ static int Main(string[] args)
+ {
+ String host = "localhost:5672";
+ String addr = "amq.direct/key";
+ Int32 nMsg = 10;
+
+ if (args.Length > 0)
+ host = args[0];
+ if (args.Length > 1)
+ addr = args[1];
+ if (args.Length > 2)
+ nMsg = Convert.ToInt32(args[2]);
+
+ Console.WriteLine("csharp.direct.sender");
+ Console.WriteLine("host : {0}", host);
+ Console.WriteLine("addr : {0}", addr);
+ Console.WriteLine("nMsg : {0}", nMsg);
+ Console.WriteLine();
+
+ Connection connection = null;
+ try
+ {
+ connection = new Connection(host);
+ connection.Open();
+
+ if (!connection.IsOpen) {
+ Console.WriteLine("Failed to open connection to host : {0}", host);
+ } else {
+ Session session = connection.CreateSession();
+ Sender sender = session.CreateSender(addr);
+ for (int i = 0; i < nMsg; i++) {
+ Message message = new Message(String.Format("Test Message {0}", i));
+ sender.Send(message);
+ }
+ session.Sync();
+ connection.Close();
+ return 0;
+ }
+ } catch (Exception e) {
+ Console.WriteLine("Exception {0}.", e);
+ if (null != connection)
+ connection.Close();
+ }
+ return 1;
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.sender/csharp.direct.sender.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.sender/csharp.direct.sender.csproj new file mode 100644 index 0000000000..a8cd07da74 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.direct.sender/csharp.direct.sender.csproj @@ -0,0 +1,102 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{7B71CE78-8E78-4632-ADBE-F4D5DFAE0068}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.direct.sender</RootNamespace>
+ <AssemblyName>csharp.direct.sender</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.direct.sender.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.client/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.client/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..eddb759ef1 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.client/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.example.client")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.example.client")]
+[assembly: AssemblyCopyright("Copyright ? 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("c60b17ab-a82c-4edf-ba95-1e88bd4c3e75")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.client/csharp.example.client.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.client/csharp.example.client.cs new file mode 100644 index 0000000000..19a5267297 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.client/csharp.example.client.cs @@ -0,0 +1,75 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging.Examples {
+ class Client {
+ static int Main(string[] args) {
+ String url = "amqp:tcp:127.0.0.1:5672";
+ String connectionOptions = "";
+
+ if (args.Length > 0)
+ url = args[0];
+ if (args.Length > 1)
+ connectionOptions = args[1];
+
+ Connection connection = new Connection(url, connectionOptions);
+ try
+ {
+ connection.Open();
+
+ Session session = connection.CreateSession();
+
+ Sender sender = session.CreateSender("service_queue");
+
+ Address responseQueue = new Address("#response-queue; {create:always, delete:always}");
+ Receiver receiver = session.CreateReceiver(responseQueue);
+
+ String[] s = new String[] {
+ "Twas brillig, and the slithy toves",
+ "Did gire and gymble in the wabe.",
+ "All mimsy were the borogroves,",
+ "And the mome raths outgrabe."
+ };
+
+ Message request = new Message("");
+ request.ReplyTo = responseQueue;
+
+ for (int i = 0; i < s.Length; i++) {
+ request.SetContent(s[i]);
+ sender.Send(request);
+ Message response = receiver.Fetch();
+ Console.WriteLine("{0} -> {1}", request.GetContent(), response.GetContent());
+ }
+ connection.Close();
+ return 0;
+ }
+ catch (Exception e)
+ {
+ Console.WriteLine("Exception {0}.", e);
+ connection.Close();
+ }
+ return 1;
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.client/csharp.example.client.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.client/csharp.example.client.csproj new file mode 100644 index 0000000000..537efa8658 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.client/csharp.example.client.csproj @@ -0,0 +1,102 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{0DE01712-C2D1-4CA4-B42C-5856456A8696}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.example.client</RootNamespace>
+ <AssemblyName>csharp.example.client</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.example.client.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.declare_queues/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.declare_queues/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..4e065803f6 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.declare_queues/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.example.declare_queues")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.example.declare_queues")]
+[assembly: AssemblyCopyright("Copyright ? 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("c60b17ab-a82c-4edf-ba95-1e88bd4c3e75")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.declare_queues/csharp.example.declare_queues.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.declare_queues/csharp.example.declare_queues.cs new file mode 100644 index 0000000000..06267bf719 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.declare_queues/csharp.example.declare_queues.cs @@ -0,0 +1,60 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging.Examples {
+ class DeclareQueues {
+ //
+ // Sample invocation: csharp.example.declare_queues.exe localhost:5672 my-queue
+ //
+ static int Main(string[] args) {
+ string addr = "localhost:5672";
+ string queue = "my-queue";
+
+ if (args.Length > 0)
+ addr = args[0];
+ if (args.Length > 1)
+ queue = args[1];
+
+ Connection connection = null;
+ try
+ {
+ connection = new Connection(addr);
+ connection.Open();
+ Session session = connection.CreateSession();
+ String queueName = queue + "; {create: always}";
+ Sender sender = session.CreateSender(queueName);
+ session.Close();
+ connection.Close();
+ return 0;
+ }
+ catch (Exception e)
+ {
+ Console.WriteLine("Exception {0}.", e);
+ if (null != connection)
+ connection.Close();
+ }
+ return 1;
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.declare_queues/csharp.example.declare_queues.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.declare_queues/csharp.example.declare_queues.csproj new file mode 100644 index 0000000000..a458e706ad --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.declare_queues/csharp.example.declare_queues.csproj @@ -0,0 +1,102 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{E31B349C-830C-4583-8BD9-30DA4398349F}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.example.declare_queues</RootNamespace>
+ <AssemblyName>csharp.example.declare_queues</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.example.declare_queues.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/Options.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/Options.cs new file mode 100644 index 0000000000..6059f76442 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/Options.cs @@ -0,0 +1,175 @@ +/*
+* Licensed to the Apache Software Foundation (ASF) under one
+* or more contributor license agreements. See the NOTICE file
+* distributed with this work for additional information
+* regarding copyright ownership. The ASF licenses this file
+* to you under the Apache License, Version 2.0 (the
+* "License"); you may not use this file except in compliance
+* with the License. You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing,
+* software distributed under the License is distributed on an
+* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+* KIND, either express or implied. See the License for the
+* specific language governing permissions and limitations
+* under the License.
+*/
+
+namespace Org.Apache.Qpid.Messaging.Examples
+{
+ using System;
+
+ public class Options
+ {
+ private string url;
+ private string address;
+ private UInt64 timeout;
+ private int count;
+ private string id;
+ private string replyTo;
+ //private string[] properties;
+ //private string[] entries;
+ private string content;
+ private string connectionOptions;
+ private bool forever;
+
+ public Options(string[] args)
+ {
+ this.url = "amqp:tcp:127.0.0.1:5672";
+ this.address = "";
+ this.timeout = 0;
+ this.count = 1;
+ this.id = "";
+ this.replyTo = "";
+ this.content = "";
+ this.connectionOptions = "";
+ this.forever = false;
+ Parse(args);
+ }
+
+ private void Parse(string[] args)
+ {
+ int argCount = args.Length;
+ int current = 0;
+
+ while ((current + 1) < argCount)
+ {
+ string arg = args[current];
+ if (arg == "--broker")
+ {
+ this.url = args[++current];
+ }
+ else if (arg == "--address")
+ {
+ this.address = args[++current];
+ }
+ else if (arg == "--timeout")
+ {
+ arg = args[++current];
+ UInt64 i = UInt64.Parse(arg);
+ if (i >= 0)
+ {
+ this.timeout = i;
+ }
+ }
+ else if (arg == "--count")
+ {
+ arg = args[++current];
+ int i = int.Parse(arg);
+ if (i >= 0)
+ {
+ this.count = i;
+ }
+ }
+ else if (arg == "--id")
+ {
+ this.id = args[++current];
+ }
+ else if (arg == "--reply-to")
+ {
+ this.replyTo = args[++current];
+ }
+ else if (arg == "--properties")
+ {
+ throw new ArgumentException("TODO: properties not implemented");
+ }
+ else if (arg == "--entries")
+ {
+ throw new ArgumentException("TODO: entries not implemented");
+ }
+ else if (arg == "--content")
+ {
+ this.content = args[++current];
+ }
+ else if (arg == "--connection-options")
+ {
+ this.connectionOptions = args[++current];
+ }
+ else if (arg == "--forever")
+ {
+ this.forever = true;
+ }
+ else
+ {
+ throw new ArgumentException(String.Format("unknown argument \"{0}\"", arg));
+ }
+
+ current++;
+ }
+
+ if (current == argCount)
+ {
+ throw new ArgumentException("missing argument: address");
+ }
+
+ address = args[current];
+ }
+
+ public string Url
+ {
+ get { return this.url; }
+ }
+
+ public string Address
+ {
+ get { return this.address; }
+ }
+
+ public UInt64 Timeout
+ {
+ get { return this.timeout; }
+ }
+
+ public int Count
+ {
+ get { return this.count; }
+ }
+
+ public string Id
+ {
+ get { return this.id; }
+ }
+
+ public string ReplyTo
+ {
+ get { return this.replyTo; }
+ }
+
+ public string Content
+ {
+ get { return content; }
+ }
+
+ public string ConnectionOptions
+ {
+ get { return this.connectionOptions; }
+ }
+
+ public bool Forever
+ {
+ get { return this.forever; }
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..d949dde644 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.example.drain")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.example.drain")]
+[assembly: AssemblyCopyright("Copyright ? 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("c60b17ab-a82c-4edf-ba95-1e88bd4c3e75")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/csharp.example.drain.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/csharp.example.drain.cs new file mode 100644 index 0000000000..da8218bbf7 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/csharp.example.drain.cs @@ -0,0 +1,88 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using System.Collections;
+using System.Collections.Generic;
+using System.Collections.ObjectModel;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging.Examples {
+ class Drain {
+ //
+ // Sample invocation: csharp.example.drain.exe --broker localhost:5672 --timeout 30 my-queue
+ //
+ static int Main(string[] args) {
+ Options options = new Options(args);
+
+ Connection connection = null;
+ try
+ {
+ connection = new Connection(options.Url, options.ConnectionOptions);
+ connection.Open();
+ Session session = connection.CreateSession();
+ Receiver receiver = session.CreateReceiver(options.Address);
+ Duration timeout = options.Forever ?
+ DurationConstants.FORVER :
+ DurationConstants.SECOND * options.Timeout;
+ Message message = new Message();
+
+ while (receiver.Fetch(ref message, timeout))
+ {
+ Dictionary<string, object> properties = new Dictionary<string, object>();
+ properties = message.Properties;
+ Console.Write("Message(properties={0}, content='",
+ message.MapAsString(properties));
+
+ if ("amqp/map" == message.ContentType)
+ {
+ Dictionary<string, object> content = new Dictionary<string, object>();
+ message.GetContent(content);
+ Console.Write(message.MapAsString(content));
+ }
+ else if ("amqp/list" == message.ContentType)
+ {
+ Collection<object> content = new Collection<object>();
+ message.GetContent(content);
+ Console.Write(message.ListAsString(content));
+ }
+ else
+ {
+ Console.Write(message.GetContent());
+ }
+ Console.WriteLine("')");
+ session.Acknowledge();
+ }
+ receiver.Close();
+ session.Close();
+ connection.Close();
+ return 0;
+ }
+ catch (Exception e)
+ {
+ Console.WriteLine("Exception {0}.", e);
+ if (null != connection)
+ connection.Close();
+ }
+ return 1;
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/csharp.example.drain.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/csharp.example.drain.csproj new file mode 100644 index 0000000000..75f419d0c5 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.drain/csharp.example.drain.csproj @@ -0,0 +1,103 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{C43DEB69-8088-420B-B0CA-C699535E6D08}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.example.drain</RootNamespace>
+ <AssemblyName>csharp.example.drain</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.example.drain.cs" />
+ <Compile Include="Options.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.helloworld/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.helloworld/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..17bbd842b0 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.helloworld/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.example.helloworld")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.example.helloworld")]
+[assembly: AssemblyCopyright("Copyright ? 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("19ce67e4-db90-4480-88c4-3721f47634c7")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.helloworld/csharp.example.helloworld.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.helloworld/csharp.example.helloworld.cs new file mode 100644 index 0000000000..336970a3ba --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.helloworld/csharp.example.helloworld.cs @@ -0,0 +1,55 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging {
+ class Program {
+ static void Main(string[] args) {
+ String broker = args.Length > 0 ? args[0] : "localhost:5672";
+ String address = args.Length > 1 ? args[1] : "amq.topic";
+
+ Connection connection = null;
+ try {
+ connection = new Connection(broker);
+ connection.Open();
+ Session session = connection.CreateSession();
+
+ Receiver receiver = session.CreateReceiver(address);
+ Sender sender = session.CreateSender(address);
+
+ sender.Send(new Message("Hello world!"));
+
+ Message message = new Message();
+ message = receiver.Fetch(DurationConstants.SECOND * 1);
+ Console.WriteLine("{0}", message.GetContent());
+ session.Acknowledge();
+
+ connection.Close();
+ } catch (Exception e) {
+ Console.WriteLine("Exception {0}.", e);
+ if (null != connection)
+ connection.Close();
+ }
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.helloworld/csharp.example.helloworld.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.helloworld/csharp.example.helloworld.csproj new file mode 100644 index 0000000000..0307bea754 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.helloworld/csharp.example.helloworld.csproj @@ -0,0 +1,102 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{8CC1C265-0507-44A3-9483-8FAF48513F4D}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.example.helloworld</RootNamespace>
+ <AssemblyName>csharp.example.helloworld</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.example.helloworld.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.server/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.server/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..7f0fd52997 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.server/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.example.server")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.example.server")]
+[assembly: AssemblyCopyright("Copyright ? 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("c60b17ab-a82c-4edf-ba95-1e88bd4c3e75")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.server/csharp.example.server.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.server/csharp.example.server.cs new file mode 100644 index 0000000000..1d93649195 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.server/csharp.example.server.cs @@ -0,0 +1,66 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging.Examples {
+ class Server {
+ static int Main(string[] args) {
+ string url = "amqp:tcp:127.0.0.1:5672";
+ string connectionOptions = "";
+
+ if (args.Length > 0)
+ url = args[0];
+ // address args[1] is not used in this example
+ if (args.Length > 2)
+ connectionOptions = args[2];
+
+ try {
+ Connection connection = new Connection(url, connectionOptions);
+ connection.Open();
+ Session session = connection.CreateSession();
+ Receiver receiver = session.CreateReceiver("service_queue; {create: always}");
+
+ while (true) {
+ Message request = receiver.Fetch();
+ Address address = request.ReplyTo;
+
+ if (null != address) {
+ Sender sender = session.CreateSender(address);
+ String s = request.GetContent();
+ Message response = new Message(s.ToUpper());
+ sender.Send(response);
+ Console.WriteLine("Processed request: {0} -> {1}", request.GetContent(), response.GetContent());
+ session.Acknowledge();
+ } else {
+ Console.WriteLine("Error: no reply address specified for request: {0}", request.GetContent());
+ session.Reject(request);
+ }
+ }
+ // connection.Close(); // unreachable in this example
+ } catch (Exception e) {
+ Console.WriteLine("Exception {0}.", e);
+ }
+ return 1;
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.server/csharp.example.server.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.server/csharp.example.server.csproj new file mode 100644 index 0000000000..d377018a30 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.server/csharp.example.server.csproj @@ -0,0 +1,102 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{090A081D-E8B5-4949-AA43-EE182B7101E3}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.example.server</RootNamespace>
+ <AssemblyName>csharp.example.server</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.example.server.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/Options.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/Options.cs new file mode 100644 index 0000000000..9ceb11e520 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/Options.cs @@ -0,0 +1,185 @@ +/*
+* Licensed to the Apache Software Foundation (ASF) under one
+* or more contributor license agreements. See the NOTICE file
+* distributed with this work for additional information
+* regarding copyright ownership. The ASF licenses this file
+* to you under the Apache License, Version 2.0 (the
+* "License"); you may not use this file except in compliance
+* with the License. You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing,
+* software distributed under the License is distributed on an
+* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+* KIND, either express or implied. See the License for the
+* specific language governing permissions and limitations
+* under the License.
+*/
+
+namespace Org.Apache.Qpid.Messaging.Examples
+{
+ using System;
+ using System.Collections;
+ using System.Collections.Generic;
+ using System.Collections.ObjectModel;
+
+ public class Options
+ {
+ private string url;
+ private string address;
+ private int timeout;
+ private int count;
+ private string id;
+ private string replyTo;
+ private Collection<string> properties;
+ private Collection<string> entries;
+ private string content;
+ private string connectionOptions;
+ private bool forever;
+
+ public Options(string[] args)
+ {
+ this.url = "amqp:tcp:127.0.0.1:5672";
+ this.address = "";
+ this.timeout = 0;
+ this.count = 1;
+ this.id = "";
+ this.replyTo = "";
+ properties = new Collection<string>();
+ entries = new Collection<string>();
+ this.content = "";
+ this.connectionOptions = "";
+ this.forever = false;
+ Parse(args);
+ }
+
+ private void Parse(string[] args)
+ {
+ int argCount = args.Length;
+ int current = 0;
+
+ while ((current + 1) < argCount)
+ {
+ string arg = args[current];
+ if (arg == "--broker")
+ {
+ this.url = args[++current];
+ }
+ else if (arg == "--address")
+ {
+ this.address = args[++current];
+ }
+ else if (arg == "--timeout")
+ {
+ arg = args[++current];
+ int i = int.Parse(arg);
+ if (i >= 0)
+ {
+ this.timeout = i;
+ }
+ }
+ else if (arg == "--count")
+ {
+ arg = args[++current];
+ int i = int.Parse(arg);
+ if (i >= 0)
+ {
+ this.count = i;
+ }
+ }
+ else if (arg == "--id")
+ {
+ this.id = args[++current];
+ }
+ else if (arg == "--reply-to")
+ {
+ this.replyTo = args[++current];
+ }
+ else if (arg == "--properties")
+ {
+ this.properties.Add(args[++current]);
+ }
+ else if (arg == "--map")
+ {
+ this.entries.Add(args[++current]);
+ }
+ else if (arg == "--content")
+ {
+ this.content = args[++current];
+ }
+ else if (arg == "--connection-options")
+ {
+ this.connectionOptions = args[++current];
+ }
+ else if (arg == "--forever")
+ {
+ this.forever = true;
+ }
+ else
+ {
+ throw new ArgumentException(String.Format("unknown argument \"{0}\"", arg));
+ }
+
+ current++;
+ }
+
+ if (current == argCount)
+ {
+ throw new ArgumentException("missing argument: address");
+ }
+
+ address = args[current];
+ }
+
+ public string Url
+ {
+ get { return this.url; }
+ }
+
+ public string Address
+ {
+ get { return this.address; }
+ }
+
+ public int Timeout
+ {
+ get { return this.timeout; }
+ }
+
+ public int Count
+ {
+ get { return this.count; }
+ }
+
+ public string Id
+ {
+ get { return this.id; }
+ }
+
+ public string ReplyTo
+ {
+ get { return this.replyTo; }
+ }
+
+ public Collection<string> Entries
+ {
+ get { return this.entries; }
+ }
+
+ public string Content
+ {
+ get { return content; }
+ }
+
+ public string ConnectionOptions
+ {
+ get { return this.connectionOptions; }
+ }
+
+ public bool Forever
+ {
+ get { return this.forever; }
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..f07c780571 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.example.spout")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.example.spout")]
+[assembly: AssemblyCopyright("Copyright ? 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("c60b17ab-a82c-4edf-ba95-1e88bd4c3e75")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/csharp.example.spout.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/csharp.example.spout.cs new file mode 100644 index 0000000000..531abadd4c --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/csharp.example.spout.cs @@ -0,0 +1,120 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using System.Diagnostics;
+using System.Collections;
+using System.Collections.Generic;
+using System.Collections.ObjectModel;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging.Examples {
+ class Spout {
+ //
+ // Sample invocation: csharp.example.spout.exe --broker localhost:5672 my-queue
+ //
+ static bool NameVal(string In, out string nameOut, out string valueOut)
+ {
+ int pos = In.IndexOf("=");
+ if (-1 == pos) {
+ nameOut = In;
+ valueOut = "";
+ return false;
+ } else {
+ nameOut = In.Substring(0, pos);
+ if (pos + 1 < In.Length) {
+ valueOut = In.Substring(pos + 1);
+ return true;
+ } else {
+ valueOut = "";
+ return false;
+ }
+ }
+ }
+
+ static void SetEntries(Collection<string> entries, Dictionary<string, object> content)
+ {
+ foreach (String entry in entries)
+ {
+ string name = "";
+ string value = "";
+ if (NameVal(entry, out name, out value))
+ content.Add(name, value);
+ else
+ content.Add(name, "");
+ }
+ }
+
+ static int Main(string[] args) {
+ Options options = new Options(args);
+
+ Connection connection = null;
+ try
+ {
+ connection = new Connection(options.Url, options.ConnectionOptions);
+ connection.Open();
+ Session session = connection.CreateSession();
+ Sender sender = session.CreateSender(options.Address);
+ Message message;
+ if (options.Entries.Count > 0)
+ {
+ Dictionary<string, object> content = new Dictionary<string, object>();
+ SetEntries(options.Entries, content);
+ message = new Message(content);
+ }
+ else
+ {
+ message = new Message(options.Content);
+ message.ContentType = "text/plain";
+ }
+ Address replyToAddr = new Address(options.ReplyTo);
+
+ Stopwatch stopwatch = new Stopwatch();
+ TimeSpan timespan = new TimeSpan(0,0,options.Timeout);
+ stopwatch.Start();
+ for (int count = 0;
+ (0 == options.Count || count < options.Count) &&
+ (0 == options.Timeout || stopwatch.Elapsed <= timespan);
+ count++)
+ {
+ if ("" != options.ReplyTo) message.ReplyTo = replyToAddr;
+ string id = options.Id ;
+ if ("" == id) {
+ Guid g = Guid.NewGuid();
+ id = g.ToString();
+ }
+ string spoutid = id + ":" + count;
+ message.SetProperty("spout-id", spoutid);
+ sender.Send(message);
+ }
+ session.Sync();
+ connection.Close();
+ return 0;
+ } catch (Exception e) {
+ Console.WriteLine("Exception {0}.", e);
+ if (null != connection)
+ connection.Close();
+ }
+ return 1;
+ }
+ }
+}
+
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/csharp.example.spout.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/csharp.example.spout.csproj new file mode 100644 index 0000000000..c0e4d7fe1f --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.example.spout/csharp.example.spout.csproj @@ -0,0 +1,106 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{EB36626D-36C2-41B3-B65E-762BAF27F137}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.example.spout</RootNamespace>
+ <AssemblyName>csharp.example.spout</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Reference Include="System" />
+ </ItemGroup>
+ <ItemGroup>
+ <Compile Include="csharp.example.spout.cs" />
+ <Compile Include="Options.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.receiver/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.receiver/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..a87f92ccdf --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.receiver/Properties/AssemblyInfo.cs @@ -0,0 +1,54 @@ +/*
+* Licensed to the Apache Software Foundation (ASF) under one
+* or more contributor license agreements. See the NOTICE file
+* distributed with this work for additional information
+* regarding copyright ownership. The ASF licenses this file
+* to you under the Apache License, Version 2.0 (the
+* "License"); you may not use this file except in compliance
+* with the License. You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing,
+* software distributed under the License is distributed on an
+* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+* KIND, either express or implied. See the License for the
+* specific language governing permissions and limitations
+* under the License.
+*/
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.map.callback.receiver")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.map.callback.receiver")]
+[assembly: AssemblyCopyright("Copyright © 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("002049f9-41c5-420f-9ff6-45bb652dded6")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.receiver/csharp.map.callback.receiver.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.receiver/csharp.map.callback.receiver.cs new file mode 100644 index 0000000000..b1ba949e07 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.receiver/csharp.map.callback.receiver.cs @@ -0,0 +1,286 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Collections.ObjectModel;
+using Org.Apache.Qpid.Messaging;
+using Org.Apache.Qpid.Messaging.SessionReceiver;
+
+namespace Org.Apache.Qpid.Messaging.Examples
+{
+ /// <summary>
+ /// A class with functions to display structured messages.
+ /// </summary>
+ public static class MessageViewer
+ {
+ /// <summary>
+ /// A Function to display a amqp/map message packaged as a Dictionary.
+ /// </summary>
+ /// <param name="dict">The AMQP map</param>
+ /// <param name="level">Nested depth</param>
+ public static void ShowDictionary(Dictionary<string, object> dict, int level)
+ {
+ foreach (KeyValuePair<string, object> kvp in dict)
+ {
+ Console.Write(new string(' ', level * 4));
+
+ if (QpidTypeCheck.ObjectIsMap(kvp.Value))
+ {
+ Console.WriteLine("Key: {0}, Value: Dictionary", kvp.Key);
+ ShowDictionary((Dictionary<string, object>)kvp.Value, level + 1);
+ }
+ else if (QpidTypeCheck.ObjectIsList(kvp.Value))
+ {
+ Console.WriteLine("Key: {0}, Value: List", kvp.Key);
+ ShowList((Collection<object>)kvp.Value, level + 1);
+ }
+ else
+ Console.WriteLine("Key: {0}, Value: {1}, Type: {2}",
+ kvp.Key, kvp.Value, kvp.Value.GetType().ToString());
+ }
+ }
+
+ /// <summary>
+ /// A function to display a ampq/list message packaged as a List.
+ /// </summary>
+ /// <param name="list">The AMQP list</param>
+ /// <param name="level">Nested depth</param>
+ public static void ShowList(Collection<object> list, int level)
+ {
+ foreach (object obj in list)
+ {
+ Console.Write(new string(' ', level * 4));
+
+ if (QpidTypeCheck.ObjectIsMap(obj))
+ {
+ Console.WriteLine("Dictionary");
+ ShowDictionary((Dictionary<string, object>)obj, level + 1);
+ }
+ else if (QpidTypeCheck.ObjectIsList(obj))
+ {
+ Console.WriteLine("List");
+ ShowList((Collection<object>)obj, level + 1);
+ }
+ else
+ Console.WriteLine("Value: {0}, Type: {1}",
+ obj.ToString(), obj.GetType().ToString());
+ }
+ }
+
+ /// <summary>
+ /// A function to diplay a Message. The native Object type is
+ /// decomposed into AMQP types.
+ /// </summary>
+ /// <param name="message">The Message</param>
+ public static void ShowMessage(Message message)
+ {
+ if ("amqp/map" == message.ContentType)
+ {
+ Console.WriteLine("Received a Dictionary");
+ Dictionary<string, object> content = new Dictionary<string, object>();
+ message.GetContent(content);
+ ShowDictionary(content, 0);
+ }
+ else if ("amqp/list" == message.ContentType)
+ {
+ Console.WriteLine("Received a List");
+ Collection<object> content = new Collection<object>();
+ message.GetContent(content);
+ ShowList(content, 0);
+ }
+ else
+ {
+ Console.WriteLine("Received a String");
+ Console.WriteLine(message.GetContent());
+ }
+ }
+ }
+
+
+
+ /// <summary>
+ /// A model class to demonstrate how a user may use the Qpid Messaging
+ /// interface to receive Session messages using a callback.
+ /// </summary>
+ class ReceiverProcess : ISessionReceiver
+ {
+ UInt32 messagesReceived = 0;
+
+ /// <summary>
+ /// SessionReceiver implements the ISessionReceiver interface.
+ /// It is the callback function that receives all messages for a Session.
+ /// It may be called any time server is running.
+ /// It is always called on server's private thread.
+ /// </summary>
+ /// <param name="receiver">The Receiver associated with the message.</param>
+ /// <param name="message">The Message</param>
+ public void SessionReceiver(Receiver receiver, Message message)
+ {
+ //
+ // Indicate message reception
+ //
+ Console.WriteLine("--- Message {0}", ++messagesReceived);
+
+ //
+ // Display the received message
+ //
+ MessageViewer.ShowMessage(message);
+
+ //
+ // Acknowledge the receipt of all received messages.
+ //
+ receiver.Session.Acknowledge();
+ }
+
+
+ /// <summary>
+ /// Usage
+ /// </summary>
+ /// <param name="url">Connection target</param>
+ /// <param name="addr">Address: broker exchange + routing key</param>
+ /// <param name="nSec">n seconds to keep callback open</param>
+ static void usage(string url, string addr, int nSec)
+ {
+
+ Console.WriteLine("usage: {0} [url [addr [nSec]]]",
+ System.Diagnostics.Process.GetCurrentProcess().ProcessName);
+ Console.WriteLine();
+ Console.WriteLine("A program to connect to a broker and receive");
+ Console.WriteLine("messages from a named exchange with a routing key.");
+ Console.WriteLine("The receiver uses a session callback and keeps the callback");
+ Console.WriteLine("server open for so many seconds.");
+ Console.WriteLine("The details of the message body's types and values are shown.");
+ Console.WriteLine();
+ Console.WriteLine(" url = target address for 'new Connection(url)'");
+ Console.WriteLine(" addr = address for 'session.CreateReceiver(addr)'");
+ Console.WriteLine(" nSec = time in seconds to keep the receiver callback open");
+ Console.WriteLine();
+ Console.WriteLine("Default values:");
+ Console.WriteLine(" {0} {1} {2} {3}",
+ System.Diagnostics.Process.GetCurrentProcess().ProcessName,
+ url, addr, nSec);
+ }
+
+
+ /// <summary>
+ /// A function to illustrate how to open a Session callback and
+ /// receive messages.
+ /// </summary>
+ /// <param name="args">Main program arguments</param>
+ public int TestProgram(string[] args)
+ {
+ string url = "amqp:tcp:localhost:5672";
+ string addr = "amq.direct/map_example";
+ int nSec = 30;
+ string connectionOptions = "";
+
+ if (1 == args.Length)
+ {
+ if (args[0].Equals("-h") || args[0].Equals("-H") || args[0].Equals("/?"))
+ {
+ usage(url, addr, nSec);
+ return 1;
+ }
+ }
+
+ if (args.Length > 0)
+ url = args[0];
+ if (args.Length > 1)
+ addr = args[1];
+ if (args.Length > 2)
+ nSec = System.Convert.ToInt32(args[2]);
+ if (args.Length > 3)
+ connectionOptions = args[3];
+
+ //
+ // Create and open an AMQP connection to the broker URL
+ //
+ Connection connection = new Connection(url, connectionOptions);
+ connection.Open();
+
+ //
+ // Create a session.
+ //
+ Session session = connection.CreateSession();
+
+ //
+ // Receive through callback
+ //
+ // Create callback server and implicitly start it
+ //
+ SessionReceiver.CallbackServer cbServer =
+ new SessionReceiver.CallbackServer(session, this);
+
+ //
+ // The callback server is running and executing callbacks on a
+ // separate thread.
+ //
+
+ //
+ // Create a receiver for the direct exchange using the
+ // routing key "map_example".
+ //
+ Receiver receiver = session.CreateReceiver(addr);
+
+ //
+ // Establish a capacity
+ //
+ receiver.Capacity = 100;
+
+ //
+ // Wait so many seconds for messages to arrive.
+ //
+ System.Threading.Thread.Sleep(nSec * 1000); // in mS
+
+ //
+ // Stop the callback server.
+ //
+ cbServer.Close();
+
+ //
+ // Close the receiver and the connection.
+ //
+ receiver.Close();
+ connection.Close();
+ return 0;
+ }
+ }
+
+
+ class MapCallbackReceiverMain
+ {
+ /// <summary>
+ /// Main program
+ /// </summary>
+ /// <param name="args">Main prgram args</param>
+ static int Main(string[] args)
+ {
+ // Invoke 'TestProgram' as non-static class.
+ ReceiverProcess mainProc = new ReceiverProcess();
+
+ int result = mainProc.TestProgram(args);
+
+ return result;
+ }
+ }
+}
+
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.receiver/csharp.map.callback.receiver.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.receiver/csharp.map.callback.receiver.csproj new file mode 100644 index 0000000000..1380fc4981 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.receiver/csharp.map.callback.receiver.csproj @@ -0,0 +1,109 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{68A43817-2358-4A31-8FDF-FE21722BFBCF}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.map.callback.receiver</RootNamespace>
+ <AssemblyName>csharp.map.callback.receiver</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Reference Include="System" />
+ </ItemGroup>
+ <ItemGroup>
+ <Compile Include="csharp.map.callback.receiver.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ <ProjectReference Include="..\..\src\sessionreceiver\org.apache.qpid.messaging.sessionreceiver.csproj">
+ <Project>{B0A51CEC-30A2-4C2E-90BE-AE95107EAA05}</Project>
+ <Name>org.apache.qpid.messaging.sessionreceiver</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.sender/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.sender/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..e633f76673 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.sender/Properties/AssemblyInfo.cs @@ -0,0 +1,54 @@ +/*
+* Licensed to the Apache Software Foundation (ASF) under one
+* or more contributor license agreements. See the NOTICE file
+* distributed with this work for additional information
+* regarding copyright ownership. The ASF licenses this file
+* to you under the Apache License, Version 2.0 (the
+* "License"); you may not use this file except in compliance
+* with the License. You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing,
+* software distributed under the License is distributed on an
+* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+* KIND, either express or implied. See the License for the
+* specific language governing permissions and limitations
+* under the License.
+*/
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.map.callback.sender")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.map.callback.sender")]
+[assembly: AssemblyCopyright("Copyright © 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("1eec2eca-adbd-4394-8b01-f4c4645bb122")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.sender/csharp.map.callback.sender.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.sender/csharp.map.callback.sender.cs new file mode 100644 index 0000000000..4cc88564e7 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.sender/csharp.map.callback.sender.cs @@ -0,0 +1,194 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Collections.ObjectModel;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging.Examples
+{
+ class MapSender
+ {
+ //
+ // usage
+ //
+ static void usage(string url, string addr, UInt32 count, string connOpts)
+ {
+
+ Console.WriteLine("usage: {0} [url [addr [count]]]",
+ System.Diagnostics.Process.GetCurrentProcess().ProcessName);
+ Console.WriteLine();
+ Console.WriteLine("A program to connect to a broker and send N");
+ Console.WriteLine("messages to a named exchange with a routing key.");
+ Console.WriteLine();
+ Console.WriteLine(" url = target address for 'new Connection(url)'");
+ Console.WriteLine(" addr = address for 'session.CreateReceiver(addr)'");
+ Console.WriteLine(" count = number of messages to send");
+ Console.WriteLine(" connectionOptions = options list");
+ Console.WriteLine();
+ Console.WriteLine("Default values:");
+ Console.WriteLine(" {0} {1} {2} {3} {4}",
+ System.Diagnostics.Process.GetCurrentProcess().ProcessName,
+ url, addr, count, connOpts);
+ }
+
+
+ //
+ // TestProgram
+ //
+ public int TestProgram(string[] args)
+ {
+ string url = "amqp:tcp:localhost:5672";
+ string addr = "amq.direct/map_example";
+ UInt32 count = 1;
+ string connectionOptions = "";
+
+ if (1 == args.Length)
+ {
+ if (args[0].Equals("-h") || args[0].Equals("-H") || args[0].Equals("/?"))
+ {
+ usage(url, addr, count, connectionOptions);
+ return 1;
+ }
+ }
+
+ if (args.Length > 0)
+ url = args[0];
+ if (args.Length > 1)
+ addr = args[1];
+ if (args.Length > 2)
+ count = System.Convert.ToUInt32(args[2]);
+ if (args.Length > 3)
+ connectionOptions = args[3];
+
+ //
+ // Create and open an AMQP connection to the broker URL
+ //
+ Connection connection = new Connection(url, connectionOptions);
+ connection.Open();
+
+ //
+ // Create a session and a sender to the direct exchange using the
+ // routing key "map_example".
+ //
+ Session session = connection.CreateSession();
+ Sender sender = session.CreateSender(addr);
+
+ //
+ // Create structured content for the message. This example builds a
+ // map of items including a nested map and a list of values.
+ //
+ Dictionary<string, object> content = new Dictionary<string, object>();
+ Dictionary<string, object> subMap = new Dictionary<string, object>();
+ Collection<object> colors = new Collection<object>();
+
+ // add simple types
+ content["id"] = 987654321;
+ content["name"] = "Widget";
+ content["percent"] = 0.99;
+
+ // add nested amqp/map
+ subMap["name"] = "Smith";
+ subMap["number"] = 354;
+ content["nestedMap"] = subMap;
+
+ // add an amqp/list
+ colors.Add("red");
+ colors.Add("green");
+ colors.Add("white");
+ content["colorsList"] = colors;
+
+ // add one of each supported amqp data type
+ bool mybool = true;
+ content["mybool"] = mybool;
+
+ byte mybyte = 4;
+ content["mybyte"] = mybyte;
+
+ UInt16 myUInt16 = 5;
+ content["myUInt16"] = myUInt16;
+
+ UInt32 myUInt32 = 6;
+ content["myUInt32"] = myUInt32;
+
+ UInt64 myUInt64 = 7;
+ content["myUInt64"] = myUInt64;
+
+ char mychar = 'h';
+ content["mychar"] = mychar;
+
+ Int16 myInt16 = 9;
+ content["myInt16"] = myInt16;
+
+ Int32 myInt32 = 10;
+ content["myInt32"] = myInt32;
+
+ Int64 myInt64 = 11;
+ content["myInt64"] = myInt64;
+
+ Single mySingle = (Single)12.12;
+ content["mySingle"] = mySingle;
+
+ Double myDouble = 13.13;
+ content["myDouble"] = myDouble;
+
+ Guid myGuid = new Guid("000102030405060708090a0b0c0d0e0f");
+ content["myGuid"] = myGuid;
+
+ //
+ // Construct a message with the map content and send it synchronously
+ // via the sender.
+ //
+ Message message = new Message(content);
+ for (UInt32 i = 0; i<count; i++)
+ sender.Send(message, true);
+
+ //
+ // Wait until broker receives all messages.
+ //
+ session.Sync();
+
+ //
+ // Close the connection.
+ //
+ connection.Close();
+
+ return 0;
+ }
+ }
+
+ class MapSenderMain
+ {
+ //
+ // Main
+ //
+ static int Main(string[] args)
+ {
+ // Invoke 'TestProgram' as non-static class.
+ MapSender mainProc = new MapSender();
+
+ int result = mainProc.TestProgram(args);
+
+ return result;
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.sender/csharp.map.callback.sender.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.sender/csharp.map.callback.sender.csproj new file mode 100644 index 0000000000..cb0a5705af --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.callback.sender/csharp.map.callback.sender.csproj @@ -0,0 +1,107 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{12F1C14F-5C7D-4075-9BAE-C091394FF99A}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.map.callback.sender</RootNamespace>
+ <AssemblyName>csharp.map.callback.sender</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Reference Include="System" />
+ </ItemGroup>
+ <ItemGroup>
+ <Compile Include="csharp.map.callback.sender.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.receiver/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.receiver/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..694d6b9ce1 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.receiver/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.map.receiver")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.map.receiver")]
+[assembly: AssemblyCopyright("Copyright © 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("002049f9-41c5-420f-9ff6-45bb652dded6")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.receiver/csharp.map.receiver.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.receiver/csharp.map.receiver.cs new file mode 100644 index 0000000000..5219ee789a --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.receiver/csharp.map.receiver.cs @@ -0,0 +1,87 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using System.Collections.Generic;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging.examples
+{
+ class MapReceiver
+ {
+ // csharp.map.receiver example
+ //
+ // Send an amqp/map message to amqp:tcp:localhost:5672 amq.direct/map_example
+ // The map message
+ //
+ static int Main(string[] args)
+ {
+ string url = "amqp:tcp:localhost:5672";
+ string address = "message_queue; {create: always}";
+ string connectionOptions = "";
+
+ if (args.Length > 0)
+ url = args[0];
+ if (args.Length > 1)
+ address = args[1];
+ if (args.Length > 2)
+ connectionOptions = args[3];
+
+ //
+ // Create and open an AMQP connection to the broker URL
+ //
+ Connection connection = new Connection(url);
+ connection.Open();
+
+ //
+ // Create a session and a receiver fir the direct exchange using the
+ // routing key "map_example".
+ //
+ Session session = connection.CreateSession();
+ Receiver receiver = session.CreateReceiver(address);
+
+ //
+ // Fetch the message from the broker
+ //
+ Message message = receiver.Fetch(DurationConstants.MINUTE);
+
+ //
+ // Extract the structured content from the message.
+ //
+ Dictionary<string, object> content = new Dictionary<string, object>();
+ message.GetContent(content);
+ Console.WriteLine("{0}", message.AsString(content));
+
+ //
+ // Acknowledge the receipt of all received messages.
+ //
+ session.Acknowledge();
+
+ //
+ // Close the receiver and the connection.
+ //
+ receiver.Close();
+ connection.Close();
+ return 0;
+ }
+ }
+}
+
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.receiver/csharp.map.receiver.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.receiver/csharp.map.receiver.csproj new file mode 100644 index 0000000000..82882be817 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.receiver/csharp.map.receiver.csproj @@ -0,0 +1,102 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{AD9E53D7-DB10-4DA2-84D2-A81BE09B04E9}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.map.receiver</RootNamespace>
+ <AssemblyName>csharp.map.receiver</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.map.receiver.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/Properties/AssemblyInfo.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/Properties/AssemblyInfo.cs new file mode 100644 index 0000000000..ea29ac2417 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/Properties/AssemblyInfo.cs @@ -0,0 +1,57 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("csharp.map.sender")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("csharp.map.sender")]
+[assembly: AssemblyCopyright("Copyright © 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("1eec2eca-adbd-4394-8b01-f4c4645bb122")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.cs b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.cs new file mode 100644 index 0000000000..9001eb8e0b --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.cs @@ -0,0 +1,146 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+
+using System;
+using System.Collections.Generic;
+using System.Collections.ObjectModel;
+using Org.Apache.Qpid.Messaging;
+
+namespace Org.Apache.Qpid.Messaging.examples
+{
+ class MapSender
+ {
+ // csharp.map.sender example
+ //
+ // Send an amqp/map message to amqp:tcp:localhost:5672 amq.direct/map_example
+ // The map message contains simple types, a nested amqp/map,
+ // an ampq/list, and specific instances of each supported type.
+ //
+ static int Main(string[] args)
+ {
+ string url = "amqp:tcp:localhost:5672";
+ string address = "message_queue; {create: always}";
+ string connectionOptions = "";
+
+ if (args.Length > 0)
+ url = args[0];
+ if (args.Length > 1)
+ address = args[1];
+ if (args.Length > 2)
+ connectionOptions = args[2];
+
+ //
+ // Create and open an AMQP connection to the broker URL
+ //
+ Connection connection = new Connection(url, connectionOptions);
+ connection.Open();
+
+ //
+ // Create a session and a sender to the direct exchange
+ //
+ Session session = connection.CreateSession();
+ Sender sender = session.CreateSender(address);
+
+ //
+ // Create structured content for the message. This example builds a
+ // map of items including a nested map and a list of values.
+ //
+ Dictionary<string, object> content = new Dictionary<string, object>();
+ Dictionary<string, object> subMap = new Dictionary<string, object>();
+ Collection<object> colors = new Collection<object>();
+
+ // add simple types
+ content["id"] = 987654321;
+ content["name"] = "Widget";
+ content["percent"] = 0.99;
+
+ // add nested amqp/map
+ subMap["name"] = "Smith";
+ subMap["number"] = 354;
+ content["nestedMap"] = subMap;
+
+ // add an amqp/list
+ colors.Add("red");
+ colors.Add("green");
+ colors.Add("white");
+ // list contains null value
+ colors.Add(null);
+ content["colorsList"] = colors;
+
+ // add one of each supported amqp data type
+ bool mybool = true;
+ content["mybool"] = mybool;
+
+ byte mybyte = 4;
+ content["mybyte"] = mybyte;
+
+ UInt16 myUInt16 = 5 ;
+ content["myUInt16"] = myUInt16;
+
+ UInt32 myUInt32 = 6;
+ content["myUInt32"] = myUInt32;
+
+ UInt64 myUInt64 = 7;
+ content["myUInt64"] = myUInt64;
+
+ char mychar = 'h';
+ content["mychar"] = mychar;
+
+ Int16 myInt16 = 9;
+ content["myInt16"] = myInt16;
+
+ Int32 myInt32 = 10;
+ content["myInt32"] = myInt32;
+
+ Int64 myInt64 = 11;
+ content["myInt64"] = myInt64;
+
+ Single mySingle = (Single)12.12;
+ content["mySingle"] = mySingle;
+
+ Double myDouble = 13.13;
+ content["myDouble"] = myDouble;
+
+ Guid myGuid = new Guid("000102030405060708090a0b0c0d0e0f");
+ content["myGuid"] = myGuid;
+
+ content["myNull"] = null;
+
+ //
+ // Construct a message with the map content and send it synchronously
+ // via the sender.
+ //
+ Message message = new Message(content);
+ sender.Send(message, true);
+
+ //
+ // Wait until broker receives all messages.
+ //
+ session.Sync();
+
+ //
+ // Close the connection.
+ //
+ connection.Close();
+ return 0;
+ }
+ }
+}
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.csproj b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.csproj new file mode 100644 index 0000000000..0e42201b6d --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/csharp.map.sender/csharp.map.sender.csproj @@ -0,0 +1,102 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{5D8252F5-E1D3-44A0-94C7-7CB75E843C10}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>csharp.map.sender</RootNamespace>
+ <AssemblyName>csharp.map.sender</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <Optimize>true</Optimize>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ <ErrorReport>prompt</ErrorReport>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="csharp.map.sender.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/powershell.example.helloworld/powershell.example.helloworld.ps1 b/qpid/cpp/bindings/qpid/dotnet/examples/powershell.example.helloworld/powershell.example.helloworld.ps1 new file mode 100644 index 0000000000..e8c21bc3f6 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/powershell.example.helloworld/powershell.example.helloworld.ps1 @@ -0,0 +1,34 @@ +#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+#
+# Script for 32-bit powershell
+#
+
+[Reflection.Assembly]::LoadFile('W:\cpp\src\Debug\org.apache.qpid.messagingd.dll')
+$conn = new-object Org.Apache.Qpid.Messaging.Connection("localhost:5672")
+$conn.Open()
+$sess = $conn.CreateSession()
+$rcvr = $sess.CreateReceiver("amq.topic")
+$sender = $sess.CreateSender("amq.topic")
+$msg1 = new-object Org.Apache.Qpid.Messaging.Message("Hello world!")
+$sender.Send($msg1)
+$dur = new-object Org.Apache.Qpid.Messaging.Duration(1000)
+$msg2 = $rcvr.Fetch($dur)
+$msg2.GetContent()
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Application.Designer.vb b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Application.Designer.vb new file mode 100644 index 0000000000..7b4d946036 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Application.Designer.vb @@ -0,0 +1,32 @@ +'
+' Licensed to the Apache Software Foundation (ASF) under one
+' or more contributor license agreements. See the NOTICE file
+' distributed with this work for additional information
+' regarding copyright ownership. The ASF licenses this file
+' to you under the Apache License, Version 2.0 (the
+' "License"); you may not use this file except in compliance
+' with the License. You may obtain a copy of the License at
+'
+' http://www.apache.org/licenses/LICENSE-2.0
+'
+' Unless required by applicable law or agreed to in writing,
+' software distributed under the License is distributed on an
+' "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+' KIND, either express or implied. See the License for the
+' specific language governing permissions and limitations
+' under the License.
+'
+
+'------------------------------------------------------------------------------
+' <auto-generated>
+' This code was generated by a tool.
+' Runtime Version:2.0.50727.4927
+'
+' Changes to this file may cause incorrect behavior and will be lost if
+' the code is regenerated.
+' </auto-generated>
+'------------------------------------------------------------------------------
+
+Option Strict On
+Option Explicit On
+
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Application.myapp b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Application.myapp new file mode 100644 index 0000000000..256be1aa9e --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Application.myapp @@ -0,0 +1,28 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements. See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership. The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing,
+software distributed under the License is distributed on an
+"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+KIND, either express or implied. See the License for the
+specific language governing permissions and limitations
+under the License.
+-->
+<MyApplicationData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+ <MySubMain>false</MySubMain>
+ <SingleInstance>false</SingleInstance>
+ <ShutdownMode>0</ShutdownMode>
+ <EnableVisualStyles>true</EnableVisualStyles>
+ <AuthenticationMode>0</AuthenticationMode>
+ <ApplicationType>2</ApplicationType>
+ <SaveMySettingsOnExit>true</SaveMySettingsOnExit>
+</MyApplicationData>
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/AssemblyInfo.vb b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/AssemblyInfo.vb new file mode 100644 index 0000000000..d0727fe9fa --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/AssemblyInfo.vb @@ -0,0 +1,54 @@ +'
+' Licensed to the Apache Software Foundation (ASF) under one
+' or more contributor license agreements. See the NOTICE file
+' distributed with this work for additional information
+' regarding copyright ownership. The ASF licenses this file
+' to you under the Apache License, Version 2.0 (the
+' "License"); you may not use this file except in compliance
+' with the License. You may obtain a copy of the License at
+'
+' http://www.apache.org/licenses/LICENSE-2.0
+'
+' Unless required by applicable law or agreed to in writing,
+' software distributed under the License is distributed on an
+' "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+' KIND, either express or implied. See the License for the
+' specific language governing permissions and limitations
+' under the License.
+'
+
+Imports System
+Imports System.Reflection
+Imports System.Runtime.InteropServices
+
+' General Information about an assembly is controlled through the following
+' set of attributes. Change these attribute values to modify the information
+' associated with an assembly.
+
+' Review the values of the assembly attributes
+
+<Assembly: AssemblyTitle("visualbasic.example.client")>
+<Assembly: AssemblyDescription("")>
+<Assembly: AssemblyCompany("Microsoft")>
+<Assembly: AssemblyProduct("visualbasic.example.client")>
+<Assembly: AssemblyCopyright("Copyright © Microsoft 2010")>
+<Assembly: AssemblyTrademark("")>
+
+<Assembly: ComVisible(False)>
+
+'The following GUID is for the ID of the typelib if this project is exposed to COM
+<Assembly: Guid("ec9df8cf-c1d4-4938-9e72-93fb81d55700")>
+
+' Version information for an assembly consists of the following four values:
+'
+' Major Version
+' Minor Version
+' Build Number
+' Revision
+'
+' You can specify all the values or you can default the Build and Revision Numbers
+' by using the '*' as shown below:
+' <Assembly: AssemblyVersion("1.0.*")>
+
+<Assembly: AssemblyVersion("1.0.0.0")>
+<Assembly: AssemblyFileVersion("1.0.0.0")>
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Resources.Designer.vb b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Resources.Designer.vb new file mode 100644 index 0000000000..fa8cc43f84 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Resources.Designer.vb @@ -0,0 +1,82 @@ +'
+' Licensed to the Apache Software Foundation (ASF) under one
+' or more contributor license agreements. See the NOTICE file
+' distributed with this work for additional information
+' regarding copyright ownership. The ASF licenses this file
+' to you under the Apache License, Version 2.0 (the
+' "License"); you may not use this file except in compliance
+' with the License. You may obtain a copy of the License at
+'
+' http://www.apache.org/licenses/LICENSE-2.0
+'
+' Unless required by applicable law or agreed to in writing,
+' software distributed under the License is distributed on an
+' "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+' KIND, either express or implied. See the License for the
+' specific language governing permissions and limitations
+' under the License.
+'
+
+'------------------------------------------------------------------------------
+' <auto-generated>
+' This code was generated by a tool.
+' Runtime Version:2.0.50727.4927
+'
+' Changes to this file may cause incorrect behavior and will be lost if
+' the code is regenerated.
+' </auto-generated>
+'------------------------------------------------------------------------------
+
+Option Strict On
+Option Explicit On
+
+Imports System
+
+Namespace My.Resources
+
+ 'This class was auto-generated by the StronglyTypedResourceBuilder
+ 'class via a tool like ResGen or Visual Studio.
+ 'To add or remove a member, edit your .ResX file then rerun ResGen
+ 'with the /str option, or rebuild your VS project.
+ '''<summary>
+ ''' A strongly-typed resource class, for looking up localized strings, etc.
+ '''</summary>
+ <Global.System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "2.0.0.0"), _
+ Global.System.Diagnostics.DebuggerNonUserCodeAttribute(), _
+ Global.System.Runtime.CompilerServices.CompilerGeneratedAttribute(), _
+ Global.Microsoft.VisualBasic.HideModuleNameAttribute()> _
+ Friend Module Resources
+
+ Private resourceMan As Global.System.Resources.ResourceManager
+
+ Private resourceCulture As Global.System.Globalization.CultureInfo
+
+ '''<summary>
+ ''' Returns the cached ResourceManager instance used by this class.
+ '''</summary>
+ <Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)> _
+ Friend ReadOnly Property ResourceManager() As Global.System.Resources.ResourceManager
+ Get
+ If Object.ReferenceEquals(resourceMan, Nothing) Then
+ Dim temp As Global.System.Resources.ResourceManager = New Global.System.Resources.ResourceManager("Org.Apache.Qpid.Messaging.Examples.Resources", GetType(Resources).Assembly)
+ resourceMan = temp
+ End If
+ Return resourceMan
+ End Get
+ End Property
+
+ '''<summary>
+ ''' Overrides the current thread's CurrentUICulture property for all
+ ''' resource lookups using this strongly typed resource class.
+ '''</summary>
+ <Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)> _
+ Friend Property Culture() As Global.System.Globalization.CultureInfo
+ Get
+ Return resourceCulture
+ End Get
+ Set
+ resourceCulture = value
+ End Set
+ End Property
+ End Module
+End Namespace
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Resources.resx b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Resources.resx new file mode 100644 index 0000000000..70432f3b74 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Resources.resx @@ -0,0 +1,135 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements. See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership. The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing,
+software distributed under the License is distributed on an
+"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+KIND, either express or implied. See the License for the
+specific language governing permissions and limitations
+under the License.
+-->
+<root>
+ <!--
+ Microsoft ResX Schema
+
+ Version 2.0
+
+ The primary goals of this format is to allow a simple XML format
+ that is mostly human readable. The generation and parsing of the
+ various data types are done through the TypeConverter classes
+ associated with the data types.
+
+ Example:
+
+ ... ado.net/XML headers & schema ...
+ <resheader name="resmimetype">text/microsoft-resx</resheader>
+ <resheader name="version">2.0</resheader>
+ <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+ <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+ <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+ <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+ <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+ <value>[base64 mime encoded serialized .NET Framework object]</value>
+ </data>
+ <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+ <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+ <comment>This is a comment</comment>
+ </data>
+
+ There are any number of "resheader" rows that contain simple
+ name/value pairs.
+
+ Each data row contains a name, and value. The row also contains a
+ type or mimetype. Type corresponds to a .NET class that support
+ text/value conversion through the TypeConverter architecture.
+ Classes that don't support this are serialized and stored with the
+ mimetype set.
+
+ The mimetype is used for serialized objects, and tells the
+ ResXResourceReader how to depersist the object. This is currently not
+ extensible. For a given mimetype the value must be set accordingly:
+
+ Note - application/x-microsoft.net.object.binary.base64 is the format
+ that the ResXResourceWriter will generate, however the reader can
+ read any of the formats listed below.
+
+ mimetype: application/x-microsoft.net.object.binary.base64
+ value : The object must be serialized with
+ : System.Serialization.Formatters.Binary.BinaryFormatter
+ : and then encoded with base64 encoding.
+
+ mimetype: application/x-microsoft.net.object.soap.base64
+ value : The object must be serialized with
+ : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+ : and then encoded with base64 encoding.
+
+ mimetype: application/x-microsoft.net.object.bytearray.base64
+ value : The object must be serialized into a byte array
+ : using a System.ComponentModel.TypeConverter
+ : and then encoded with base64 encoding.
+ -->
+ <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+ <xsd:element name="root" msdata:IsDataSet="true">
+ <xsd:complexType>
+ <xsd:choice maxOccurs="unbounded">
+ <xsd:element name="metadata">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" />
+ </xsd:sequence>
+ <xsd:attribute name="name" type="xsd:string" />
+ <xsd:attribute name="type" type="xsd:string" />
+ <xsd:attribute name="mimetype" type="xsd:string" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="assembly">
+ <xsd:complexType>
+ <xsd:attribute name="alias" type="xsd:string" />
+ <xsd:attribute name="name" type="xsd:string" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="data">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+ <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+ </xsd:sequence>
+ <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+ <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+ <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+ </xsd:complexType>
+ </xsd:element>
+ <xsd:element name="resheader">
+ <xsd:complexType>
+ <xsd:sequence>
+ <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+ </xsd:sequence>
+ <xsd:attribute name="name" type="xsd:string" use="required" />
+ </xsd:complexType>
+ </xsd:element>
+ </xsd:choice>
+ </xsd:complexType>
+ </xsd:element>
+ </xsd:schema>
+ <resheader name="resmimetype">
+ <value>text/microsoft-resx</value>
+ </resheader>
+ <resheader name="version">
+ <value>2.0</value>
+ </resheader>
+ <resheader name="reader">
+ <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+ </resheader>
+ <resheader name="writer">
+ <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+ </resheader>
+</root>
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Settings.Designer.vb b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Settings.Designer.vb new file mode 100644 index 0000000000..d02c7f85c6 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Settings.Designer.vb @@ -0,0 +1,92 @@ +'
+' Licensed to the Apache Software Foundation (ASF) under one
+' or more contributor license agreements. See the NOTICE file
+' distributed with this work for additional information
+' regarding copyright ownership. The ASF licenses this file
+' to you under the Apache License, Version 2.0 (the
+' "License"); you may not use this file except in compliance
+' with the License. You may obtain a copy of the License at
+'
+' http://www.apache.org/licenses/LICENSE-2.0
+'
+' Unless required by applicable law or agreed to in writing,
+' software distributed under the License is distributed on an
+' "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+' KIND, either express or implied. See the License for the
+' specific language governing permissions and limitations
+' under the License.
+'
+
+'------------------------------------------------------------------------------
+' <auto-generated>
+' This code was generated by a tool.
+' Runtime Version:2.0.50727.4927
+'
+' Changes to this file may cause incorrect behavior and will be lost if
+' the code is regenerated.
+' </auto-generated>
+'------------------------------------------------------------------------------
+
+Option Strict On
+Option Explicit On
+
+
+Namespace My
+
+ <Global.System.Runtime.CompilerServices.CompilerGeneratedAttribute(), _
+ Global.System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "9.0.0.0"), _
+ Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)> _
+ Partial Friend NotInheritable Class MySettings
+ Inherits Global.System.Configuration.ApplicationSettingsBase
+
+ Private Shared defaultInstance As MySettings = CType(Global.System.Configuration.ApplicationSettingsBase.Synchronized(New MySettings),MySettings)
+
+#Region "My.Settings Auto-Save Functionality"
+#If _MyType = "WindowsForms" Then
+ Private Shared addedHandler As Boolean
+
+ Private Shared addedHandlerLockObject As New Object
+
+ <Global.System.Diagnostics.DebuggerNonUserCodeAttribute(), Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)> _
+ Private Shared Sub AutoSaveSettings(ByVal sender As Global.System.Object, ByVal e As Global.System.EventArgs)
+ If My.Application.SaveMySettingsOnExit Then
+ My.Settings.Save()
+ End If
+ End Sub
+#End If
+#End Region
+
+ Public Shared ReadOnly Property [Default]() As MySettings
+ Get
+
+#If _MyType = "WindowsForms" Then
+ If Not addedHandler Then
+ SyncLock addedHandlerLockObject
+ If Not addedHandler Then
+ AddHandler My.Application.Shutdown, AddressOf AutoSaveSettings
+ addedHandler = True
+ End If
+ End SyncLock
+ End If
+#End If
+ Return defaultInstance
+ End Get
+ End Property
+ End Class
+End Namespace
+
+Namespace My
+
+ <Global.Microsoft.VisualBasic.HideModuleNameAttribute(), _
+ Global.System.Diagnostics.DebuggerNonUserCodeAttribute(), _
+ Global.System.Runtime.CompilerServices.CompilerGeneratedAttribute()> _
+ Friend Module MySettingsProperty
+
+ <Global.System.ComponentModel.Design.HelpKeywordAttribute("My.Settings")> _
+ Friend ReadOnly Property Settings() As Global.Org.Apache.Qpid.Messaging.Examples.My.MySettings
+ Get
+ Return Global.Org.Apache.Qpid.Messaging.Examples.My.MySettings.Default
+ End Get
+ End Property
+ End Module
+End Namespace
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Settings.settings b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Settings.settings new file mode 100644 index 0000000000..469395e45e --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/MyProject/Settings.settings @@ -0,0 +1,25 @@ +<?xml version='1.0' encoding='utf-8'?>
+<!--
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements. See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership. The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing,
+software distributed under the License is distributed on an
+"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+KIND, either express or implied. See the License for the
+specific language governing permissions and limitations
+under the License.
+-->
+<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)" UseMySettingsClassName="true">
+ <Profiles>
+ <Profile Name="(Default)" />
+ </Profiles>
+ <Settings />
+</SettingsFile>
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/visualbasic.example.client.vb b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/visualbasic.example.client.vb new file mode 100644 index 0000000000..f32cfd8bce --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/visualbasic.example.client.vb @@ -0,0 +1,72 @@ +'
+'
+' Licensed to the Apache Software Foundation (ASF) under one
+' or more contributor license agreements. See the NOTICE file
+' distributed with this work for additional information
+' regarding copyright ownership. The ASF licenses this file
+' to you under the Apache License, Version 2.0 (the
+' "License"); you may not use this file except in compliance
+' with the License. You may obtain a copy of the License at
+'
+' http://www.apache.org/licenses/LICENSE-2.0
+'
+' Unless required by applicable law or agreed to in writing,
+' software distributed under the License is distributed on an
+' "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+' KIND, either express or implied. See the License for the
+' specific language governing permissions and limitations
+' under the License.
+'
+'
+
+Imports System
+Imports Org.Apache.Qpid.Messaging
+Namespace Org.Apache.Qpid.Messaging.Examples
+ Module Module1
+ Class Client
+ Public Shared Function Main(ByVal args() As String) As Integer
+ Dim url As String = "amqp:tcp:127.0.0.1:5672"
+ Dim connectionOptions As String = ""
+
+ If args.Length > 0 Then url = args(0)
+ If args.Length > 1 Then connectionOptions = args(1)
+
+ Dim connection As Connection
+ Try
+ connection = New Connection(url, connectionOptions)
+ connection.Open()
+
+ Dim session As Session = connection.CreateSession()
+
+ Dim sender As Sender = session.CreateSender("service_queue")
+
+ Dim responseQueue As Address = New Address("#response-queue; {create:always, delete:always}")
+ Dim receiver As Receiver = session.CreateReceiver(responseQueue)
+
+ Dim s(3) As String
+ s(0) = "Twas brillig, and the slithy toves"
+ s(1) = "Did gire and gymble in the wabe."
+ s(2) = "All mimsy were the borogroves,"
+ s(3) = "And the mome raths outgrabe."
+
+ Dim request As Message = New Message("")
+ request.ReplyTo = responseQueue
+
+ Dim i As Integer
+ For i = 0 To s.Length - 1
+ request.SetContent(s(i))
+ sender.Send(request)
+ Dim response As Message = receiver.Fetch()
+ Console.WriteLine("{0} -> {1}", request.GetContent(), response.GetContent())
+ Next i
+ connection.Close()
+ Main = 0
+ Catch e As Exception
+ Console.WriteLine("Exception {0}.", e)
+ connection.Close()
+ Main = 1
+ End Try
+ End Function
+ End Class
+ End Module
+End Namespace
diff --git a/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/visualbasic.example.client.vbproj b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/visualbasic.example.client.vbproj new file mode 100644 index 0000000000..4463dc7902 --- /dev/null +++ b/qpid/cpp/bindings/qpid/dotnet/examples/visualbasic.example.client/visualbasic.example.client.vbproj @@ -0,0 +1,176 @@ +<?xml version="1.0" encoding="utf-8"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing,
+ software distributed under the License is distributed on an
+ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ KIND, either express or implied. See the License for the
+ specific language governing permissions and limitations
+ under the License.
+
+-->
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">x86</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{CFEA696E-115B-4AD1-AB56-804E360EDD51}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <StartupObject>Sub Main</StartupObject>
+ <RootNamespace>Org.Apache.Qpid.Messaging.Examples</RootNamespace>
+ <AssemblyName>visualbasic.example.client</AssemblyName>
+ <FileAlignment>512</FileAlignment>
+ <MyType>Console</MyType>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <OptionExplicit>On</OptionExplicit>
+ <OptionCompare>Binary</OptionCompare>
+ <OptionStrict>Off</OptionStrict>
+ <OptionInfer>On</OptionInfer>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
+ <DebugSymbols>true</DebugSymbols>
+ <DefineDebug>true</DefineDebug>
+ <DefineTrace>true</DefineTrace>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DocumentationFile>visualbasic.example.client.xml</DocumentationFile>
+ <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
+ <DefineTrace>true</DefineTrace>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DocumentationFile>visualbasic.example.client.xml</DocumentationFile>
+ <Optimize>true</Optimize>
+ <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x86' ">
+ <DefineTrace>true</DefineTrace>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DocumentationFile>visualbasic.example.client.xml</DocumentationFile>
+ <Optimize>true</Optimize>
+ <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x86</PlatformTarget>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x64' ">
+ <DebugSymbols>true</DebugSymbols>
+ <DefineDebug>true</DefineDebug>
+ <DefineTrace>true</DefineTrace>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DocumentationFile>visualbasic.example.client.xml</DocumentationFile>
+ <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+ <DebugType>full</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x64' ">
+ <DefineTrace>true</DefineTrace>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DocumentationFile>visualbasic.example.client.xml</DocumentationFile>
+ <Optimize>true</Optimize>
+ <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'RelWithDebInfo|x64' ">
+ <DefineTrace>true</DefineTrace>
+ <OutputPath>$(QPID_BUILD_ROOT)\src\$(Configuration)\</OutputPath>
+ <DocumentationFile>visualbasic.example.client.xml</DocumentationFile>
+ <Optimize>true</Optimize>
+ <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+ <DebugType>pdbonly</DebugType>
+ <PlatformTarget>x64</PlatformTarget>
+ </PropertyGroup>
+ <ItemGroup>
+ <Reference Include="System" />
+ <Reference Include="System.Data" />
+ <Reference Include="System.Deployment" />
+ <Reference Include="System.Xml" />
+ <Reference Include="System.Core">
+ <RequiredTargetFramework>3.5</RequiredTargetFramework>
+ </Reference>
+ <Reference Include="System.Xml.Linq">
+ <RequiredTargetFramework>3.5</RequiredTargetFramework>
+ </Reference>
+ <Reference Include="System.Data.DataSetExtensions">
+ <RequiredTargetFramework>3.5</RequiredTargetFramework>
+ </Reference>
+ </ItemGroup>
+ <ItemGroup>
+ <Import Include="Microsoft.VisualBasic" />
+ <Import Include="System" />
+ <Import Include="System.Collections" />
+ <Import Include="System.Collections.Generic" />
+ <Import Include="System.Data" />
+ <Import Include="System.Diagnostics" />
+ <Import Include="System.Linq" />
+ <Import Include="System.Xml.Linq" />
+ </ItemGroup>
+ <ItemGroup>
+ <Compile Include="visualbasic.example.client.vb" />
+ <Compile Include="MyProject\AssemblyInfo.vb" />
+ <Compile Include="MyProject\Application.Designer.vb">
+ <AutoGen>True</AutoGen>
+ <DependentUpon>Application.myapp</DependentUpon>
+ </Compile>
+ <Compile Include="MyProject\Resources.Designer.vb">
+ <AutoGen>True</AutoGen>
+ <DesignTime>True</DesignTime>
+ <DependentUpon>Resources.resx</DependentUpon>
+ </Compile>
+ <Compile Include="MyProject\Settings.Designer.vb">
+ <AutoGen>True</AutoGen>
+ <DependentUpon>Settings.settings</DependentUpon>
+ <DesignTimeSharedInput>True</DesignTimeSharedInput>
+ </Compile>
+ </ItemGroup>
+ <ItemGroup>
+ <EmbeddedResource Include="MyProject\Resources.resx">
+ <Generator>VbMyResourcesResXFileCodeGenerator</Generator>
+ <LastGenOutput>Resources.Designer.vb</LastGenOutput>
+ <CustomToolNamespace>My.Resources</CustomToolNamespace>
+ <SubType>Designer</SubType>
+ </EmbeddedResource>
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="MyProject\Application.myapp">
+ <Generator>MyApplicationCodeGenerator</Generator>
+ <LastGenOutput>Application.Designer.vb</LastGenOutput>
+ </None>
+ <None Include="MyProject\Settings.settings">
+ <Generator>SettingsSingleFileGenerator</Generator>
+ <CustomToolNamespace>My</CustomToolNamespace>
+ <LastGenOutput>Settings.Designer.vb</LastGenOutput>
+ </None>
+ </ItemGroup>
+ <ItemGroup>
+ <ProjectReference Include="..\..\src\org.apache.qpid.messaging.vcproj">
+ <Project>{AA5A3B83-5F98-406D-A01C-5A921467A57D}</Project>
+ <Name>Org.Apache.Qpid.Messaging</Name>
+ </ProjectReference>
+ </ItemGroup>
+ <ItemGroup>
+ <Folder Include="My Project\" />
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file |