diff options
Diffstat (limited to 'qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit')
3 files changed, 591 insertions, 0 deletions
diff --git a/qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit/LocalCircuitImpl.csx b/qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit/LocalCircuitImpl.csx new file mode 100644 index 0000000000..0594e4d781 --- /dev/null +++ b/qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit/LocalCircuitImpl.csx @@ -0,0 +1,290 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+using log4net;
+
+using Apache.Qpid.Integration.Tests.framework.*;
+
+using uk.co.thebadgerset.junit.extensions.util.ParsedProperties;
+
+using javax.jms.*;
+
+using System.Collections.Generic.LinkedList;
+using System.Collections.Generic.IList;
+
+namespace Apache.Qpid.Integration.Tests.framework.localcircuit
+{
+ /// <summary>
+ /// LocalCircuitImpl provides an implementation of the test circuit. This is a local only circuit implementation that
+ /// supports a single producer/consumer on each end of the circuit, with both ends of the circuit on the same JVM.
+ ///
+ /// <p/><table id="crc"><caption>CRC Card</caption>
+ /// <tr><th> Responsibilities <th> Collaborations
+ /// <tr><td> Supply the publishing and receiving ends of a test messaging circuit.
+ /// <td> <see cref="LocalPublisherImpl"/>, <see cref="LocalReceiverImpl"/>
+ /// <tr><td> Start the circuit running.
+ /// <tr><td> Close the circuit down.
+ /// <tr><td> Take a reading of the circuits state.
+ /// <tr><td> Apply assertions against the circuits state. <td> <see cref="Assertion"/>
+ /// <tr><td> Send test messages over the circuit.
+ /// <tr><td> Perform the default test procedure on the circuit.
+ /// <tr><td> Provide access to connection and controlSession exception monitors. <td> <see cref="ExceptionMonitor"/>
+ /// </table>
+ /// </summary>
+ public class LocalCircuitImpl : Circuit
+ {
+ /// <summary> Used for debugging. </summary>
+ private static ILog log = LogManager.GetLogger(typeof(LocalCircuitImpl));
+
+ /// <summary> Holds the test configuration for the circuit. </summary>
+ private ParsedProperties testProps;
+
+ /// <summary> Holds the publishing end of the circuit. </summary>
+ private LocalPublisherImpl publisher;
+
+ /// <summary> Holds the receiving end of the circuit. </summary>
+ private LocalReceiverImpl receiver;
+
+ /// <summary> Holds the connection for the publishing end of the circuit. </summary>
+ private Connection connection;
+
+ /// <summary> Holds the exception listener for the connection on the publishing end of the circuit. </summary>
+ private ExceptionMonitor connectionExceptionMonitor;
+
+ /// <summary> Holds the exception listener for the controlSession on the publishing end of the circuit. </summary>
+ private ExceptionMonitor exceptionMonitor;
+
+ /// <summary>
+ /// Creates a test circuit using the specified test parameters. The publisher, receivers, connection and
+ /// connection monitor must already have been created, to assemble the circuit.
+ /// </summary>
+ /// <param name="testProps"> The test parameters. </param>
+ /// <param name="publisher"> The test publisher. </param>
+ /// <param name="receiver"> The test receivers. </param>
+ /// <param name="connection"> The connection. </param>
+ /// <param name="connectionExceptionMonitor"> The connection exception monitor. </param>
+ public LocalCircuitImpl(ParsedProperties testProps, LocalPublisherImpl publisher, LocalReceiverImpl receiver,
+ Connection connection, ExceptionMonitor connectionExceptionMonitor)
+ {
+ this.testProps = testProps;
+ this.publisher = publisher;
+ this.receiver = receiver;
+ this.connection = connection;
+ this.connectionExceptionMonitor = connectionExceptionMonitor;
+ this.exceptionMonitor = new ExceptionMonitor();
+
+ // Set this as the parent circuit on the publisher and receivers.
+ publisher.setCircuit(this);
+ receiver.setCircuit(this);
+ }
+
+ /// <summary>
+ /// Gets the interface on the publishing end of the circuit.
+ /// </summary>
+ /// <return> The publishing end of the circuit. </return>
+ public Publisher getPublisher()
+ {
+ return publisher;
+ }
+
+ /// <summary>
+ /// Gets the local publishing circuit end, for direct manipulation.
+ /// </summary>
+ /// <return> The local publishing circuit end. </return>
+ public CircuitEnd getLocalPublisherCircuitEnd()
+ {
+ return publisher;
+ }
+
+ /// <summary>
+ /// Gets the interface on the receiving end of the circuit.
+ /// </summary>
+ /// <return> The receiving end of the circuit. </return>
+ public Receiver getReceiver()
+ {
+ return receiver;
+ }
+
+ /// <summary>
+ /// Gets the local receiving circuit end, for direct manipulation.
+ /// </summary>
+ /// <return> The local receiving circuit end. </return>
+ public CircuitEnd getLocalReceiverCircuitEnd()
+ {
+ return receiver;
+ }
+
+ /// <summary>
+ /// Checks the test circuit. The effect of this is to gather the circuits state, for both ends of the circuit,
+ /// into a report, against which assertions may be checked.
+ /// </summary>
+ public void check()
+ { }
+
+ /// <summary>
+ /// Applied a list of assertions against the test circuit. The <see cref="#check()"/> method should be called before doing
+ /// this, to ensure that the circuit has gathered its state into a report to assert against.
+ /// </summary>
+ /// <param name="assertions"> The list of assertions to apply. </param>
+ /// <return> Any assertions that failed. </return>
+ public IList<Assertion> applyAssertions(List<Assertion> assertions)
+ {
+ IList<Assertion> failures = new LinkedList<Assertion>();
+
+ for (Assertion assertion : assertions)
+ {
+ if (!assertion.apply())
+ {
+ failures.add(assertion);
+ }
+ }
+
+ return failures;
+ }
+
+ /// <summary> Connects and starts the circuit. After this method is called the circuit is ready to send messages. </summary>
+ public void start()
+ { }
+
+ /// <summary> Closes the circuit. All associated resources are closed. </summary>
+ public void close()
+ {
+ try
+ {
+ publisher.close();
+ receiver.close();
+ connection.close();
+ }
+ catch (JMSException e)
+ {
+ throw new RuntimeException("Got JMSException during close:" + e.getMessage(), e);
+ }
+ }
+
+ /// <summary> Sends a message on the test circuit. The exact nature of the message sent is controlled by the test parameters. </summary>
+ protected void send()
+ {
+ // Cast the test properties into a typed interface for convenience.
+ MessagingTestConfigProperties props = new MessagingTestConfigProperties(testProps);
+
+ bool transactional = props.getPublisherTransacted();
+ bool rollback = props.getRollbackPublisher();
+
+ // Send a message through the publisher and log any exceptions raised.
+ try
+ {
+ CircuitEnd end = getLocalPublisherCircuitEnd();
+
+ end.send(createTestMessage(end));
+
+ if (rollback)
+ {
+ end.getSession().rollback();
+ }
+ else if (transactional)
+ {
+ end.getSession().commit();
+ }
+ }
+ catch (JMSException e)
+ {
+ exceptionMonitor.onException(e);
+ }
+ }
+
+ /// <summary>
+ /// Runs the default test procedure against the circuit, and checks that all of the specified assertions hold. The
+ /// outline of the default test procedure is:
+ ///
+ /// <p/><pre>
+ /// Start the circuit.
+ /// Send test messages.
+ /// Request a status report.
+ /// Assert conditions on the publishing end of the circuit.
+ /// Assert conditions on the receiving end of the circuit.
+ /// Close the circuit.
+ /// Pass with no failed assertions or fail with a list of failed assertions.
+ /// </pre>
+ /// </summary>
+ /// <param name="numMessages"> The number of messages to send using the default test procedure. </param>
+ /// <param name="assertions"> The list of assertions to apply. </param>
+ /// <return> Any assertions that failed. </return>
+ public IList<Assertion> test(int numMessages, List<Assertion> assertions)
+ {
+ // Start the test circuit.
+ start();
+
+ // Send the requested number of test messages.
+ for (int i = 0; i < numMessages; i++)
+ {
+ send();
+ }
+
+ // Inject a short pause to allow time for exceptions to come back asynchronously.
+ TestUtils.pause(500L);
+
+ // Request a status report.
+ check();
+
+ // Clean up the publisher/receivers/controlSession/connections.
+ close();
+
+ // Apply all of the requested assertions, keeping record of any that fail.
+ IList<Assertion> failures = applyAssertions(assertions);
+
+ // Return any failed assertions to the caller.
+ return failures;
+ }
+
+ /// <summary>
+ /// Creates a message with the properties defined as per the test parameters.
+ /// </summary>
+ /// <param name="client"> The circuit end to create the message on. </param>
+ ///
+ /// <return> The test message. </return>
+ ///
+ /// <exception cref="JMSException"> Any JMSException occurring during creation of the message is allowed to fall through. </exception>
+ private Message createTestMessage(CircuitEnd client) throws JMSException
+ {
+ // Cast the test properties into a typed interface for convenience.
+ MessagingTestConfigProperties props = new MessagingTestConfigProperties(testProps);
+
+ return TestUtils.createTestMessageOfSize(client.getSession(), props.getMessageSize());
+ }
+
+ /// <summary>
+ /// Gets the exception monitor for the publishing ends connection.
+ /// </summary>
+ /// <return> The exception monitor for the publishing ends connection. </return>
+ public ExceptionMonitor getConnectionExceptionMonitor()
+ {
+ return connectionExceptionMonitor;
+ }
+
+ /// <summary>
+ /// Gets the exception monitor for the publishing ends controlSession.
+ /// </summary>
+ /// <return> The exception monitor for the publishing ends controlSession. </return>
+ public ExceptionMonitor getExceptionMonitor()
+ {
+ return exceptionMonitor;
+ }
+ }
+}
diff --git a/qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit/LocalPublisherImpl.csx b/qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit/LocalPublisherImpl.csx new file mode 100644 index 0000000000..ecc94067ae --- /dev/null +++ b/qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit/LocalPublisherImpl.csx @@ -0,0 +1,164 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+using Apache.Qpid.Integration.Tests.framework.*;
+
+using uk.co.thebadgerset.junit.extensions.util.ParsedProperties;
+
+using javax.jms.MessageConsumer;
+using javax.jms.MessageProducer;
+using javax.jms.Session;
+
+namespace Apache.Qpid.Integration.Tests.framework.localcircuit
+{
+ /// <summary>
+ /// Provides an implementation of the <see cref="Publisher"/> interface and wraps a single message producer and consumer on
+ /// a single controlSession, as a <see cref="CircuitEnd"/>. A local publisher also acts as a circuit end, because for a locally
+ /// located circuit the assertions may be applied directly, there does not need to be any inter-process messaging
+ /// between the publisher and its single circuit end, in order to ascertain its status.
+ ///
+ /// <p/><table id="crc"><caption>CRC Card</caption>
+ /// <tr><th> Responsibilities <th> Collaborations
+ /// <tr><td> Provide a message producer for sending messages.
+ /// <tr><td> Provide a message consumer for receiving messages.
+ /// <tr><td> Provide assertion that the publisher received no exceptions.
+ /// <tr><td> Provide assertion that the publisher received a no consumers error code.
+ /// <tr><td> Provide assertion that the publisher received a no route error code.
+ /// </table>
+ /// </summary>
+ public class LocalPublisherImpl extends CircuitEndBase : Publisher
+ {
+ /// <summary> Holds a reference to the containing circuit. </summary>
+ protected LocalCircuitImpl circuit;
+
+ /// <summary>
+ /// Creates a circuit end point on the specified producer, consumer and controlSession. Monitors are also configured
+ /// for messages and exceptions received by the circuit end.
+ /// </summary>
+ /// <param name="producer"> The message producer for the circuit end point. </param>
+ /// <param name="consumer"> The message consumer for the circuit end point. </param>
+ /// <param name="session"> The controlSession for the circuit end point. </param>
+ /// <param name="messageMonitor"> The monitor to notify of all messages received by the circuit end. </param>
+ /// <param name="exceptionMonitor"> The monitor to notify of all exceptions received by the circuit end. </param>
+ public LocalPublisherImpl(MessageProducer producer, MessageConsumer consumer, Session session,
+ MessageMonitor messageMonitor, ExceptionMonitor exceptionMonitor)
+ {
+ super(producer, consumer, session, messageMonitor, exceptionMonitor);
+ }
+
+ /// <summary>
+ /// Creates a circuit end point from the producer, consumer and controlSession in a circuit end base implementation.
+ /// </summary>
+ /// <param name="end"> The circuit end base implementation to take producers and consumers from. </param>
+ public LocalPublisherImpl(CircuitEndBase end)
+ {
+ super(end.getProducer(), end.getConsumer(), end.getSession(), end.getMessageMonitor(), end.getExceptionMonitor());
+ }
+
+ /// <summary> Provides an assertion that the publisher encountered no exceptions. </summary>
+ ///
+ /// <param name="testProps"> The test configuration properties. </param>
+ ///
+ /// <return> An assertion that the publisher encountered no exceptions. </return>
+ public Assertion noExceptionsAssertion(ParsedProperties testProps)
+ {
+ return new AssertionBase()
+ {
+ public bool apply()
+ {
+ bool passed = true;
+ ExceptionMonitor sessionExceptionMonitor = circuit.getExceptionMonitor();
+ ExceptionMonitor connectionExceptionMonitor = circuit.getConnectionExceptionMonitor();
+
+ if (!connectionExceptionMonitor.assertNoExceptions())
+ {
+ passed = false;
+
+ addError("Was expecting no exceptions.\n");
+ addError("Got the following exceptions on the connection, "
+ + circuit.getConnectionExceptionMonitor());
+ }
+
+ if (!sessionExceptionMonitor.assertNoExceptions())
+ {
+ passed = false;
+
+ addError("Was expecting no exceptions.\n");
+ addError("Got the following exceptions on the producer, " + circuit.getExceptionMonitor());
+ }
+
+ return passed;
+ }
+ };
+ }
+
+ /// <summary>
+ /// Provides an assertion that the AMQP channel was forcibly closed by an error condition.
+ /// </summary>
+ /// <param name="testProps"> The test configuration properties. </param>
+ ///
+ /// <return> An assertion that the AMQP channel was forcibly closed by an error condition. </return>
+ public Assertion channelClosedAssertion(ParsedProperties testProps)
+ {
+ return new NotApplicableAssertion(testProps);
+ }
+
+ /// <summary>
+ /// Provides an assertion that the publisher got a given exception during the test.
+ /// </summary>
+ /// <param name="testProps"> The test configuration properties. </param>
+ /// <param name="exceptionClass"> The exception class to check for. </param>
+ ///
+ /// <return> An assertion that the publisher got a given exception during the test. </return>
+ public Assertion exceptionAssertion(ParsedProperties testProps, final Class<? extends Exception> exceptionClass)
+ {
+ return new AssertionBase()
+ {
+ public bool apply()
+ {
+ bool passed = true;
+ ExceptionMonitor connectionExceptionMonitor = circuit.getConnectionExceptionMonitor();
+
+ if (!connectionExceptionMonitor.assertExceptionOfType(exceptionClass))
+ {
+ passed = false;
+
+ addError("Was expecting linked exception type " + exceptionClass.getName()
+ + " on the connection.\n");
+ addError((connectionExceptionMonitor.size() > 0)
+ ? ("Actually got the following exceptions on the connection, " + connectionExceptionMonitor)
+ : "Got no exceptions on the connection.");
+ }
+
+ return passed;
+ }
+ };
+ }
+
+ /// <summary>
+ /// Sets the contianing circuit.
+ /// </summary>
+ /// <param name="circuit"> The containing circuit. </param>
+ public void setCircuit(LocalCircuitImpl circuit)
+ {
+ this.circuit = circuit;
+ }
+ }
+}
\ No newline at end of file diff --git a/qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit/LocalReceiverImpl.csx b/qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit/LocalReceiverImpl.csx new file mode 100644 index 0000000000..b174a4c912 --- /dev/null +++ b/qpid/dotnet/Qpid.Integration.Tests/framework/localcircuit/LocalReceiverImpl.csx @@ -0,0 +1,137 @@ +/*
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ *
+ */
+using Apache.Qpid.Integration.Tests.framework.*;
+
+using uk.co.thebadgerset.junit.extensions.util.ParsedProperties;
+
+using javax.jms.MessageConsumer;
+using javax.jms.MessageProducer;
+using javax.jms.Session;
+
+namespace Apache.Qpid.Integration.Tests.framework.localcircuit
+{
+ /// <summary>
+ /// Provides an implementation of the <see cref="Receiver"/> interface that wraps a single message producer and consumer on
+ /// a single controlSession, as a <see cref="CircuitEnd"/>. A local receiver also acts as a circuit end, because for a locally
+ /// located circuit the assertions may be applied directly, there does not need to be any inter process messaging
+ /// between the publisher and its single circuit end, in order to ascertain its status.
+ ///
+ /// <p/><table id="crc"><caption>CRC Card</caption>
+ /// <tr><th> Responsibilities <th> Collaborations
+ /// <tr><td> Provide a message producer for sending messages.
+ /// <tr><td> Provide a message consumer for receiving messages.
+ /// <tr><td> Provide assertion that the receivers received no exceptions.
+ /// <tr><td> Provide assertion that the receivers received all test messages sent to it.
+ /// </table>
+ /// </summary>
+ public class LocalReceiverImpl extends CircuitEndBase : Receiver
+ {
+ /// <summary> Holds a reference to the containing circuit. </summary>
+ private LocalCircuitImpl circuit;
+
+ /// <summary>
+ /// Creates a circuit end point on the specified producer, consumer and controlSession. Monitors are also configured
+ /// for messages and exceptions received by the circuit end.
+ /// </summary>
+ /// <param name="producer"> The message producer for the circuit end point. </param>
+ /// <param name="consumer"> The message consumer for the circuit end point. </param>
+ /// <param name="session"> The controlSession for the circuit end point. </param>
+ /// <param name="messageMonitor"> The monitor to notify of all messages received by the circuit end. </param>
+ /// <param name="exceptionMonitor"> The monitor to notify of all exceptions received by the circuit end. </param>
+ public LocalReceiverImpl(MessageProducer producer, MessageConsumer consumer, Session session,
+ MessageMonitor messageMonitor, ExceptionMonitor exceptionMonitor)
+ {
+ super(producer, consumer, session, messageMonitor, exceptionMonitor);
+ }
+
+ /// <summary>
+ /// Creates a circuit end point from the producer, consumer and controlSession in a circuit end base implementation.
+ /// </summary>
+ /// <param name="end"> The circuit end base implementation to take producers and consumers from. </param>
+ public LocalReceiverImpl(CircuitEndBase end)
+ {
+ super(end.getProducer(), end.getConsumer(), end.getSession(), end.getMessageMonitor(), end.getExceptionMonitor());
+ }
+
+ /// <summary>
+ /// Provides an assertion that the receivers encountered no exceptions.
+ /// </summary>
+ /// <param name="testProps"> The test configuration properties. </param>
+ ///
+ /// <return> An assertion that the receivers encountered no exceptions. </return>
+ public Assertion noExceptionsAssertion(ParsedProperties testProps)
+ {
+ return new NotApplicableAssertion(testProps);
+ }
+
+ /// <summary>
+ /// Provides an assertion that the AMQP channel was forcibly closed by an error condition.
+ /// </summary>
+ /// <param name="testProps"> The test configuration properties. </param>
+ ///
+ /// <return> An assertion that the AMQP channel was forcibly closed by an error condition. </return>
+ public Assertion channelClosedAssertion(ParsedProperties testProps)
+ {
+ return new NotApplicableAssertion(testProps);
+ }
+
+ /// <summary>
+ /// Provides an assertion that the receivers got all messages that were sent to it.
+ /// </summary>
+ /// <param name="testProps"> The test configuration properties. </param>
+ ///
+ /// <return> An assertion that the receivers got all messages that were sent to it. </return>
+ public Assertion allMessagesReceivedAssertion(ParsedProperties testProps)
+ {
+ return new NotApplicableAssertion(testProps);
+ }
+
+ /// <summary>
+ /// Provides an assertion that the receivers got none of the messages that were sent to it.
+ /// </summary>
+ /// <param name="testProps"> The test configuration properties. </param>
+ ///
+ /// <return> An assertion that the receivers got none of the messages that were sent to it. </return>
+ public Assertion noMessagesReceivedAssertion(ParsedProperties testProps)
+ {
+ return new NotApplicableAssertion(testProps);
+ }
+
+ /// <summary>
+ /// Provides an assertion that the receiver got a given exception during the test.
+ /// </summary>
+ /// <param name="testProps"> The test configuration properties. </param>
+ /// <param name="exceptionClass"> The exception class to check for. <return> An assertion that the receiver got a given exception during the test. </return> </param>
+ public Assertion exceptionAssertion(ParsedProperties testProps, Class<? extends Exception> exceptionClass)
+ {
+ return new NotApplicableAssertion(testProps);
+ }
+
+ /// <summary>
+ /// Sets the contianing circuit.
+ /// </summary>
+ /// <param name="circuit"> The containing circuit. </param>
+ public void setCircuit(LocalCircuitImpl circuit)
+ {
+ this.circuit = circuit;
+ }
+ }
+}
\ No newline at end of file |