diff options
Diffstat (limited to 'src/3rdparty/v8/Makefile')
| -rw-r--r-- | src/3rdparty/v8/Makefile | 112 |
1 files changed, 73 insertions, 39 deletions
diff --git a/src/3rdparty/v8/Makefile b/src/3rdparty/v8/Makefile index 0d825c0..b65ea4c 100644 --- a/src/3rdparty/v8/Makefile +++ b/src/3rdparty/v8/Makefile @@ -30,11 +30,12 @@ CXX ?= g++ LINK ?= g++ OUTDIR ?= out -TESTJOBS ?= -j16 +TESTJOBS ?= GYPFLAGS ?= TESTFLAGS ?= ANDROID_NDK_ROOT ?= -ANDROID_TOOL_PREFIX = $(ANDROID_NDK_ROOT)/toolchain/bin/arm-linux-androideabi +ANDROID_TOOLCHAIN ?= +ANDROID_V8 ?= /data/local/v8 # Special build flags. Use them like this: "make library=shared" @@ -57,10 +58,21 @@ endif ifeq ($(objectprint), on) GYPFLAGS += -Dv8_object_print=1 endif +# verifyheap=on +ifeq ($(verifyheap), on) + GYPFLAGS += -Dv8_enable_verify_heap=1 +endif # snapshot=off ifeq ($(snapshot), off) GYPFLAGS += -Dv8_use_snapshot='false' endif +# extrachecks=on/off +ifeq ($(extrachecks), on) + GYPFLAGS += -Dv8_enable_extra_checks=1 +endif +ifeq ($(extrachecks), off) + GYPFLAGS += -Dv8_enable_extra_checks=0 +endif # gdbjit=on ifeq ($(gdbjit), on) GYPFLAGS += -Dv8_enable_gdbjit=1 @@ -71,9 +83,9 @@ ifeq ($(liveobjectlist), on) endif # vfp3=off ifeq ($(vfp3), off) - GYPFLAGS += -Dv8_can_use_vfp_instructions=false + GYPFLAGS += -Dv8_can_use_vfp3_instructions=false else - GYPFLAGS += -Dv8_can_use_vfp_instructions=true + GYPFLAGS += -Dv8_can_use_vfp3_instructions=true endif # debuggersupport=off ifeq ($(debuggersupport), off) @@ -95,6 +107,14 @@ endif ifeq ($(strictaliasing), off) GYPFLAGS += -Dv8_no_strict_aliasing=1 endif +# regexp=interpreted +ifeq ($(regexp), interpreted) + GYPFLAGS += -Dv8_interpreted_regexp=1 +endif +# hardfp=on +ifeq ($(hardfp), on) + GYPFLAGS += -Dv8_use_arm_eabi_hardfloat=true +endif # ----------------- available targets: -------------------- # - "dependencies": pulls in external dependencies (currently: GYP) @@ -103,7 +123,7 @@ endif # - every combination <arch>.<mode>, e.g. "ia32.release" # - "native": current host's architecture, release mode # - any of the above with .check appended, e.g. "ia32.release.check" -# - "android": cross-compile for Android/ARM (release mode) +# - "android": cross-compile for Android/ARM # - default (no target specified): build all DEFAULT_ARCHES and MODES # - "check": build all targets and run all tests # - "<arch>.clean" for any <arch> in ARCHES @@ -113,9 +133,10 @@ endif # Architectures and modes to be compiled. Consider these to be internal # variables, don't override them (use the targets instead). -ARCHES = ia32 x64 arm mips +ARCHES = ia32 x64 arm mipsel DEFAULT_ARCHES = ia32 x64 arm MODES = release debug +ANDROID_ARCHES = android_ia32 android_arm # List of files that trigger Makefile regeneration: GYPFILES = build/all.gyp build/common.gypi build/standalone.gypi \ @@ -124,15 +145,19 @@ GYPFILES = build/all.gyp build/common.gypi build/standalone.gypi \ # Generates all combinations of ARCHES and MODES, e.g. "ia32.release". BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES))) +ANDROID_BUILDS = $(foreach mode,$(MODES), \ + $(addsuffix .$(mode),$(ANDROID_ARCHES))) # Generates corresponding test targets, e.g. "ia32.release.check". CHECKS = $(addsuffix .check,$(BUILDS)) +ANDROID_CHECKS = $(addsuffix .check,$(ANDROID_BUILDS)) # File where previously used GYPFLAGS are stored. ENVFILE = $(OUTDIR)/environment .PHONY: all check clean dependencies $(ENVFILE).new native \ $(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \ $(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) \ - must-set-ANDROID_NDK_ROOT + $(ANDROID_ARCHES) $(ANDROID_BUILDS) $(ANDROID_CHECKS) \ + must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN # Target definitions. "all" is the default. all: $(MODES) @@ -143,6 +168,10 @@ buildbot: $(MAKE) -C "$(OUTDIR)" BUILDTYPE=$(BUILDTYPE) \ builddir="$(abspath $(OUTDIR))/$(BUILDTYPE)" +mips mips.release mips.debug: + @echo "V8 does not support big-endian MIPS builds at the moment," \ + "please use little-endian builds (mipsel)." + # Compile targets. MODES and ARCHES are convenience targets. .SECONDEXPANSION: $(MODES): $(addsuffix .$$@,$(DEFAULT_ARCHES)) @@ -162,42 +191,53 @@ native: $(OUTDIR)/Makefile.native CXX="$(CXX)" LINK="$(LINK)" BUILDTYPE=Release \ builddir="$(shell pwd)/$(OUTDIR)/$@" -# TODO(jkummerow): add "android.debug" when we need it. -android android.release: $(OUTDIR)/Makefile.android - @$(MAKE) -C "$(OUTDIR)" -f Makefile.android \ - CXX="$(ANDROID_TOOL_PREFIX)-g++" \ - AR="$(ANDROID_TOOL_PREFIX)-ar" \ - RANLIB="$(ANDROID_TOOL_PREFIX)-ranlib" \ - CC="$(ANDROID_TOOL_PREFIX)-gcc" \ - LD="$(ANDROID_TOOL_PREFIX)-ld" \ - LINK="$(ANDROID_TOOL_PREFIX)-g++" \ - BUILDTYPE=Release \ - builddir="$(shell pwd)/$(OUTDIR)/android.release" +$(ANDROID_ARCHES): $(addprefix $$@.,$(MODES)) + +$(ANDROID_BUILDS): $(GYPFILES) $(ENVFILE) build/android.gypi \ + must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN Makefile.android + @$(MAKE) -f Makefile.android $@ \ + ARCH="$(basename $@)" \ + MODE="$(subst .,,$(suffix $@))" \ + OUTDIR="$(OUTDIR)" \ + GYPFLAGS="$(GYPFLAGS)" # Test targets. check: all - @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ --arch=$(shell echo $(DEFAULT_ARCHES) | sed -e 's/ /,/g') \ $(TESTFLAGS) $(addsuffix .check,$(MODES)): $$(basename $$@) - @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ --mode=$(basename $@) $(TESTFLAGS) $(addsuffix .check,$(ARCHES)): $$(basename $$@) - @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ --arch=$(basename $@) $(TESTFLAGS) $(CHECKS): $$(basename $$@) - @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ --arch-and-mode=$(basename $@) $(TESTFLAGS) +$(addsuffix .sync, $(ANDROID_BUILDS)): $$(basename $$@) + @tools/android-sync.sh $(basename $@) $(OUTDIR) \ + $(shell pwd) $(ANDROID_V8) + +$(addsuffix .check, $(ANDROID_BUILDS)): $$(basename $$@).sync + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch-and-mode=$(basename $@) \ + --timeout=600 \ + --command-prefix="tools/android-run.py" + +$(addsuffix .check, $(ANDROID_ARCHES)): \ + $(addprefix $$(basename $$@).,$(MODES)).check + native.check: native - @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR)/native \ + @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR)/native \ --arch-and-mode=. $(TESTFLAGS) # Clean targets. You can clean each architecture individually, or everything. -$(addsuffix .clean,$(ARCHES)) android.clean: +$(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES)): rm -f $(OUTDIR)/Makefile.$(basename $@) rm -rf $(OUTDIR)/$(basename $@).release rm -rf $(OUTDIR)/$(basename $@).debug @@ -208,11 +248,11 @@ native.clean: rm -rf $(OUTDIR)/native find $(OUTDIR) -regex '.*\(host\|target\).native\.mk' -delete -clean: $(addsuffix .clean,$(ARCHES)) native.clean android.clean +clean: $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES)) native.clean # GYP file generation targets. -MAKEFILES = $(addprefix $(OUTDIR)/Makefile.,$(ARCHES)) -$(MAKEFILES): $(GYPFILES) $(ENVFILE) +OUT_MAKEFILES = $(addprefix $(OUTDIR)/Makefile.,$(ARCHES)) +$(OUT_MAKEFILES): $(GYPFILES) $(ENVFILE) GYP_GENERATORS=make \ build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ -Ibuild/standalone.gypi --depth=. \ @@ -224,18 +264,11 @@ $(OUTDIR)/Makefile.native: $(GYPFILES) $(ENVFILE) build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ -Ibuild/standalone.gypi --depth=. -S.native $(GYPFLAGS) -$(OUTDIR)/Makefile.android: $(GYPFILES) $(ENVFILE) build/android.gypi \ - must-set-ANDROID_NDK_ROOT - GYP_GENERATORS=make \ - CC="${ANDROID_TOOL_PREFIX}-gcc" \ - CXX="${ANDROID_TOOL_PREFIX}-g++" \ - build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ - -Ibuild/standalone.gypi --depth=. -Ibuild/android.gypi \ - -S.android $(GYPFLAGS) - -must-set-ANDROID_NDK_ROOT: +must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN: ifndef ANDROID_NDK_ROOT - $(error ANDROID_NDK_ROOT is not set) +ifndef ANDROID_TOOLCHAIN + $(error ANDROID_NDK_ROOT or ANDROID_TOOLCHAIN must be set)) +endif endif # Replaces the old with the new environment file if they're different, which @@ -251,6 +284,7 @@ $(ENVFILE).new: echo "CXX=$(CXX)" >> $(ENVFILE).new # Dependencies. +# Remember to keep these in sync with the DEPS file. dependencies: svn checkout --force http://gyp.googlecode.com/svn/trunk build/gyp \ - --revision 1282 + --revision 1501 |