path: root/lib/chef/provider/git.rb

#
# Author:: Daniel DeLeo (<dan@kallistec.com>)
# Copyright:: Copyright (c) 2008 Opscode, Inc.
# License:: Apache License, Version 2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

require 'chef/exceptions'
require 'chef/log'
require 'chef/provider'
require 'fileutils'

class Chef
  class Provider
    class Git < Chef::Provider

      provides :git

      def whyrun_supported?
        true
      end

      def load_current_resource
        @resolved_reference = nil
        @current_resource = Chef::Resource::Git.new(@new_resource.name)
        if current_revision = find_current_revision
          @current_resource.revision current_revision
        end
      end

      def define_resource_requirements
        # Parent directory of the target must exist.
        requirements.assert(:checkout, :sync) do |a|
          dirname = ::File.dirname(@new_resource.destination)
          a.assertion { ::File.directory?(dirname) }
          a.whyrun("Directory #{dirname} does not exist, this run will fail unless it has been previously created. Assuming it would have been created.")
          a.failure_message(Chef::Exceptions::MissingParentDirectory,
            "Cannot clone #{@new_resource} to #{@new_resource.destination}, the enclosing directory #{dirname} does not exist")
        end

        requirements.assert(:all_actions) do |a|
          a.assertion { !(@new_resource.revision =~ /^origin\//) }
          a.failure_message Chef::Exceptions::InvalidRemoteGitReference,
             "Deploying remote branches is not supported. " +
             "Specify the remote branch as a local branch for " +
             "the git repository you're deploying from " +
             "(ie: '#{@new_resource.revision.gsub('origin/', '')}' rather than '#{@new_resource.revision}')."
        end

        requirements.assert(:all_actions) do |a|
          # this can't be recovered from in why-run mode, because nothing that
          # we do in the course of a run is likely to create a valid target_revision
          # if we can't resolve it up front.
          a.assertion { target_revision != nil }
          a.failure_message Chef::Exceptions::UnresolvableGitReference,
            "Unable to parse SHA reference for '#{@new_resource.revision}' in repository '#{@new_resource.repository}'. " +
            "Verify your (case-sensitive) repository URL and revision.\n" +
            "`git ls-remote '#{@new_resource.repository}' '#{rev_search_pattern}'` output: #{@resolved_reference}"
        end
      end

      def action_checkout
        if target_dir_non_existent_or_empty?
          clone
          if @new_resource.enable_checkout
            checkout
          end
          enable_submodules
          add_remotes
        else
          Chef::Log.debug "#{@new_resource} checkout destination #{@new_resource.destination} already exists or is a non-empty directory"
        end
      end

      def action_export
        action_checkout
        converge_by("complete the export by removing #{@new_resource.destination}.git after checkout") do
          FileUtils.rm_rf(::File.join(@new_resource.destination,".git"))
        end
      end

      def action_sync
        if existing_git_clone?
          Chef::Log.debug "#{@new_resource} current revision: #{@current_resource.revision} target revision: #{target_revision}"
          unless current_revision_matches_target_revision?
            fetch_updates
            enable_submodules
            Chef::Log.info "#{@new_resource} updated to revision #{target_revision}"
          end
          add_remotes
        else
          action_checkout
        end
      end

      def git_minor_version
        @git_minor_version ||= Gem::Version.new(shell_out!('git --version', run_options).stdout.split.last)
      end

      def existing_git_clone?
        ::File.exist?(::File.join(@new_resource.destination, ".git"))
      end

      def target_dir_non_existent_or_empty?
        !::File.exist?(@new_resource.destination) || Dir.entries(@new_resource.destination).sort == ['.','..']
      end

      def find_current_revision
        Chef::Log.debug("#{@new_resource} finding current git revision")
        if ::File.exist?(::File.join(cwd, ".git"))
          # 128 is returned when we're not in a git repo. this is fine
          result = shell_out!('git rev-parse HEAD', :cwd => cwd, :returns => [0,128]).stdout.strip
        end
        sha_hash?(result) ? result : nil
      end

      def add_remotes
        if (@new_resource.additional_remotes.length > 0)
          @new_resource.additional_remotes.each_pair do |remote_name, remote_url|
            converge_by("add remote #{remote_name} from #{remote_url}") do
              Chef::Log.info "#{@new_resource} adding git remote #{remote_name} = #{remote_url}"
              setup_remote_tracking_branches(remote_name, remote_url)
            end
          end
        end
      end

      def clone
        converge_by("clone from #{@new_resource.repository} into #{@new_resource.destination}") do
          remote = @new_resource.remote

          args = []
          args << "-o #{remote}" unless remote == 'origin'
          args << "--depth #{@new_resource.depth}" if @new_resource.depth
          args << "--no-single-branch" if @new_resource.depth and git_minor_version >= Gem::Version.new('1.7.10')

          Chef::Log.info "#{@new_resource} cloning repo #{@new_resource.repository} to #{@new_resource.destination}"

          clone_cmd = "git clone #{args.join(' ')} \"#{@new_resource.repository}\" \"#{@new_resource.destination}\""
          shell_out!(clone_cmd, run_options)
        end
      end

      def checkout
        sha_ref = target_revision

        converge_by("checkout ref #{sha_ref} branch #{@new_resource.revision}") do
          # checkout into a local branch rather than a detached HEAD
          shell_out!("git branch -f #{@new_resource.checkout_branch} #{sha_ref}", run_options(:cwd => @new_resource.destination))
          shell_out!("git checkout #{@new_resource.checkout_branch}", run_options(:cwd => @new_resource.destination))
          Chef::Log.info "#{@new_resource} checked out branch: #{@new_resource.revision} onto: #{@new_resource.checkout_branch} reference: #{sha_ref}"
        end
      end

      def enable_submodules
        if @new_resource.enable_submodules
          converge_by("enable git submodules for #{@new_resource}") do
            Chef::Log.info "#{@new_resource} synchronizing git submodules"
            command = "git submodule sync"
            shell_out!(command, run_options(:cwd => @new_resource.destination))
            Chef::Log.info "#{@new_resource} enabling git submodules"
            # the --recursive flag means we require git 1.6.5+ now, see CHEF-1827
            command = "git submodule update --init --recursive"
            shell_out!(command, run_options(:cwd => @new_resource.destination))
          end
        end
      end

      def fetch_updates
        setup_remote_tracking_branches(@new_resource.remote, @new_resource.repository)
        converge_by("fetch updates for #{@new_resource.remote}") do
          # since we're in a local branch already, just reset to specified revision rather than merge
          fetch_command = "git fetch #{@new_resource.remote} && git fetch #{@new_resource.remote} --tags && git reset --hard #{target_revision}"
          Chef::Log.debug "Fetching updates from #{new_resource.remote} and resetting to revision #{target_revision}"
          shell_out!(fetch_command, run_options(:cwd => @new_resource.destination))
        end
      end

      def setup_remote_tracking_branches(remote_name, remote_url)
        converge_by("set up remote tracking branches for #{remote_url} at #{remote_name}") do
          Chef::Log.debug "#{@new_resource} configuring remote tracking branches for repository #{remote_url} "+
            "at remote #{remote_name}"
          check_remote_command = "git config --get remote.#{remote_name}.url"
          remote_status = shell_out!(check_remote_command, run_options(:cwd => @new_resource.destination, :returns => [0,1,2]))
          case remote_status.exitstatus
          when 0, 2
            # * Status 0 means that we already have a remote with this name, so we should update the url
            #   if it doesn't match the url we want.
            # * Status 2 means that we have multiple urls assigned to the same remote (not a good idea)
            #   which we can fix by replacing them all with our target url (hence the --replace-all option)

            if multiple_remotes?(remote_status) || !remote_matches?(remote_url,remote_status)
              update_remote_url_command = "git config --replace-all remote.#{remote_name}.url #{remote_url}"
              shell_out!(update_remote_url_command, run_options(:cwd => @new_resource.destination))
            end
          when 1
            add_remote_command = "git remote add #{remote_name} #{remote_url}"
            shell_out!(add_remote_command, run_options(:cwd => @new_resource.destination))
          end
        end
      end

      def multiple_remotes?(check_remote_command_result)
        check_remote_command_result.exitstatus == 2
      end

      def remote_matches?(remote_url, check_remote_command_result)
        check_remote_command_result.stdout.strip.eql?(remote_url)
      end

      def current_revision_matches_target_revision?
        (!@current_resource.revision.nil?) && (target_revision.strip.to_i(16) == @current_resource.revision.strip.to_i(16))
      end

      def target_revision
        @target_revision ||= begin
          if sha_hash?(@new_resource.revision)
            @target_revision = @new_resource.revision
          else
            @target_revision = remote_resolve_reference
          end
        end
      end

      alias :revision_slug :target_revision

      def remote_resolve_reference
        Chef::Log.debug("#{@new_resource} resolving remote reference")
        # The sha pointed to by an annotated tag is identified by the
        # '^{}' suffix appended to the tag. In order to resolve
        # annotated tags, we have to search for "revision*" and
        # post-process. Special handling for 'HEAD' to ignore a tag
        # named 'HEAD'.
        @resolved_reference = git_ls_remote(rev_search_pattern)
        refs = @resolved_reference.split("\n").map { |line| line.split("\t") }
        # First try for ^{} indicating the commit pointed to by an
        # annotated tag.
        # It is possible for a user to create a tag named 'HEAD'.
        # Using such a degenerate annotated tag would be very
        # confusing. We avoid the issue by disallowing the use of
        # annotated tags named 'HEAD'.
        if rev_search_pattern != 'HEAD'
          found = find_revision(refs, @new_resource.revision, '^{}')
        else
          found = refs_search(refs, 'HEAD')
        end
        found = find_revision(refs, @new_resource.revision) if found.empty?
        found.size == 1 ? found.first[0] : nil
      end

      def find_revision(refs, revision, suffix="")
        found = refs_search(refs, rev_match_pattern('refs/tags/', revision) + suffix)
        found = refs_search(refs, rev_match_pattern('refs/heads/', revision) + suffix) if found.empty?
        found = refs_search(refs, revision + suffix) if found.empty?
        found
      end

      def rev_match_pattern(prefix, revision)
        if revision.start_with?(prefix)
          revision
        else
          prefix + revision
        end
      end

      def rev_search_pattern
        if ['', 'HEAD'].include? @new_resource.revision
          'HEAD'
        else
          @new_resource.revision + '*'
        end
      end

      def git_ls_remote(rev_pattern)
        command = git(%Q(ls-remote "#{@new_resource.repository}" "#{rev_pattern}"))
        shell_out!(command, run_options).stdout
      end

      def refs_search(refs, pattern)
        refs.find_all { |m| m[1] == pattern }
      end

      private

      def run_options(run_opts={})
        env = {}
        if @new_resource.user
          run_opts[:user] = @new_resource.user
          # Certain versions of `git` misbehave if git configuration is
          # inaccessible in $HOME. We need to ensure $HOME matches the
          # user who is executing `git` not the user running Chef.
          env['HOME'] = begin
            require 'etc'
            Etc.getpwnam(@new_resource.user).dir
          rescue ArgumentError # user not found
            raise Chef::Exceptions::User, "Could not determine HOME for specified user '#{@new_resource.user}' for resource '#{@new_resource.name}'"
          end
        end
        run_opts[:group] = @new_resource.group if @new_resource.group
        env['GIT_SSH'] = @new_resource.ssh_wrapper if @new_resource.ssh_wrapper
        run_opts[:log_tag] = @new_resource.to_s
        run_opts[:timeout] = @new_resource.timeout if @new_resource.timeout
        env.merge!(@new_resource.environment) if @new_resource.environment
        run_opts[:environment] = env unless env.empty?
        run_opts

      end

      def cwd
        @new_resource.destination
      end

      def git(*args)
        ["git", *args].compact.join(" ")
      end

      def sha_hash?(string)
        string =~ /^[0-9a-f]{40}$/
      end

    end
  end
end