Changed service prefixes in device configurations to genivi.org

Since RVI is an open source project under the umbrella of GENIVI
the device prefixes should be genivi.org rather than jlr.com.

Signed-off-by: Rudolf J Streif <rudolf.streif@gmail.com>

3 files changed, 42 insertions, 42 deletions

diff --git a/priv/config/rvi_debian.config b/priv/config/rvi_debian.config
index e075fa4..4e1eeb5 100644
--- a/priv/config/rvi_debian.config
+++ b/priv/config/rvi_debian.config
@@ -60,12 +60,12 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
    %%   replaces the token.
    %%
    %%   Example:
-   %%     { node_service_prefix, "jlr.com/vin/$rvi_file(/etc/vin,default_vin)"},
+   %%     { node_service_prefix, "genivi.org/vin/$rvi_file(/etc/vin,default_vin)"},
    %%
    %%     will be substituted with the first line from the file
    %%     /etc/vin:
    %%
-   %%     { node_service_prefix, "jlr.com/vin/2GKEG25HXP4093669"},
+   %%     { node_service_prefix, "genivi.org/vin/2GKEG25HXP4093669"},
    %%
    %%     If /etc/vin cannot be opened, the value default_vin
    %%     will be used instead.
@@ -77,12 +77,12 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
    %%   to replace the token.
    %%
    %%   Example:
-   %%     { node_service_prefix, "jlr.com/vin/$rvi_env(VIN,default_vin)"},
+   %%     { node_service_prefix, "genivi.org/vin/$rvi_env(VIN,default_vin)"},
    %%
    %%     will be substituted with the value of the $VIN environment
    %%     variable:
    %%
-   %%     { node_service_prefix, "jlr.com/vin/2GKEG25HXP4093669"},
+   %%     { node_service_prefix, "genivi.org/vin/2GKEG25HXP4093669"},
    %%
    %%     If VIN is not a defined environment variable, the value
    %%     default_vin will be used instead.
@@ -97,12 +97,12 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
    %%   world wide unique.
    %%
    %%   Example:
-   %%     { node_service_prefix, "jlr.com/vin/$uuid(default_vin)"},
+   %%     { node_service_prefix, "genivi.org/vin/$uuid(default_vin)"},
    %%
    %%     will be substituted with the value of the root disk UUID:
    %%
    %%     { node_service_prefix,
-   %%       "jlr.com/vin/afc0a6d8-0264-4f8a-bb3e-51ff8655b51c"},
+   %%       "genivi.org/vin/afc0a6d8-0264-4f8a-bb3e-51ff8655b51c"},
    %%
    %%     If the root UUID cannot be retrieved, the value default_vin
    %%     will be used instead.
@@ -135,15 +135,15 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
      %%
      %% If a locally connected service registers itself as
      %% "hvac/fan_speed", and the node_service_prefix is
-     %% "jlr.com/vin/1234/", this node will announce the service
-     %% "jlr.com/vin/1234/hvac/fan_speed" as being available
+     %% "genivi.org/vin/1234/", this node will announce the service
+     %% "genivi.org/vin/1234/hvac/fan_speed" as being available
      %% to remotely connected rvi nodes.
      %%
      %% Two rvi nodes should never have the same node_service_prefix
      %% value unless all services add a system-wide unique name
      %% to it.
      %%
-     { node_service_prefix, "jlr.com/vin/$rvi_uuid(default_vin)/"},
+     { node_service_prefix, "genivi.org/vin/$rvi_uuid(default_vin)/"},
 
 
      %% Routing rules determine how to get a message targeting a specific
@@ -166,10 +166,10 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
 	%% The service prefix with the longest match against the service targeted
 	%% by the message will be used.
 	%%
-	%% Example: Targeted service = jlr.com/backend/sota/get_updates
+	%% Example: Targeted service = genivi.org/backend/sota/get_updates
 	%%
-	%% Prefix1: { "jlr.com/backend", [...]}
-	%% Prefix2: { "jlr.com/backend/sota", [...]}
+	%% Prefix1: { "genivi.org/backend", [...]}
+	%% Prefix2: { "genivi.org/backend/sota", [...]}
 	%%
 	%% Prefix2 will be used.
 	%%
@@ -188,7 +188,7 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
 	  ]
 	},
 
-	{ "jlr.com/backend/",
+	{ "genivi.org/backend/",
 	  %% Which protocol and data link pair to use when transmitting the message
 	  %% to the targeted service. If a pair reports a failure, the next pair is tried.
 	  [
@@ -199,7 +199,7 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
 	},
 
 	%% Used to communicate with vehicles
-	{ "jlr.com/vin/",
+	{ "genivi.org/vin/",
 	  [
 	   { proto_json_rpc, { dlink_tcp_rpc, [ broadcast, { interface, "wlan0" } ] } },
 	   { proto_json_rpc, { server_3g, [ initiate_outbound ]} },
diff --git a/priv/config/rvi_ubuntu.config b/priv/config/rvi_ubuntu.config
index 9c09cca..65319db 100644
--- a/priv/config/rvi_ubuntu.config
+++ b/priv/config/rvi_ubuntu.config
@@ -60,12 +60,12 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
    %%   replaces the token.
    %%
    %%   Example:
-   %%     { node_service_prefix, "jlr.com/vin/$rvi_file(/etc/vin,default_vin)"},
+   %%     { node_service_prefix, "genivi.org/vin/$rvi_file(/etc/vin,default_vin)"},
    %%
    %%     will be substituted with the first line from the file
    %%     /etc/vin:
    %%
-   %%     { node_service_prefix, "jlr.com/vin/2GKEG25HXP4093669"},
+   %%     { node_service_prefix, "genivi.org/vin/2GKEG25HXP4093669"},
    %%
    %%     If /etc/vin cannot be opened, the value default_vin
    %%     will be used instead.
@@ -77,12 +77,12 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
    %%   to replace the token.
    %%
    %%   Example:
-   %%     { node_service_prefix, "jlr.com/vin/$rvi_env(VIN,default_vin)"},
+   %%     { node_service_prefix, "genivi.org/vin/$rvi_env(VIN,default_vin)"},
    %%
    %%     will be substituted with the value of the $VIN environment
    %%     variable:
    %%
-   %%     { node_service_prefix, "jlr.com/vin/2GKEG25HXP4093669"},
+   %%     { node_service_prefix, "genivi.org/vin/2GKEG25HXP4093669"},
    %%
    %%     If VIN is not a defined environment variable, the value
    %%     default_vin will be used instead.
@@ -97,12 +97,12 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
    %%   world wide unique.
    %%
    %%   Example:
-   %%     { node_service_prefix, "jlr.com/vin/$uuid(default_vin)"},
+   %%     { node_service_prefix, "genivi.org/vin/$uuid(default_vin)"},
    %%
    %%     will be substituted with the value of the root disk UUID:
    %%
    %%     { node_service_prefix,
-   %%       "jlr.com/vin/afc0a6d8-0264-4f8a-bb3e-51ff8655b51c"},
+   %%       "genivi.org/vin/afc0a6d8-0264-4f8a-bb3e-51ff8655b51c"},
    %%
    %%     If the root UUID cannot be retrieved, the value default_vin
    %%     will be used instead.
@@ -135,15 +135,15 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
      %%
      %% If a locally connected service registers itself as
      %% "hvac/fan_speed", and the node_service_prefix is
-     %% "jlr.com/vin/1234/", this node will announce the service
-     %% "jlr.com/vin/1234/hvac/fan_speed" as being available
+     %% "genivi.org/vin/1234/", this node will announce the service
+     %% "genivi.org/vin/1234/hvac/fan_speed" as being available
      %% to remotely connected rvi nodes.
      %%
      %% Two rvi nodes should never have the same node_service_prefix
      %% value unless all services add a system-wide unique name
      %% to it.
      %%
-     { node_service_prefix, "jlr.com/vin/$rvi_uuid(default_vin)/"},
+     { node_service_prefix, "genivi.org/vin/$rvi_uuid(default_vin)/"},
 
 
      %% Routing rules determine how to get a message targeting a specific
@@ -166,10 +166,10 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
 	%% The service prefix with the longest match against the service targeted
 	%% by the message will be used.
 	%%
-	%% Example: Targeted service = jlr.com/backend/sota/get_updates
+	%% Example: Targeted service = genivi.org/backend/sota/get_updates
 	%%
-	%% Prefix1: { "jlr.com/backend", [...]}
-	%% Prefix2: { "jlr.com/backend/sota", [...]}
+	%% Prefix1: { "genivi.org/backend", [...]}
+	%% Prefix2: { "genivi.org/backend/sota", [...]}
 	%%
 	%% Prefix2 will be used.
 	%%
@@ -188,7 +188,7 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
 	  ]
 	},
 
-	{ "jlr.com/backend/",
+	{ "genivi.org/backend/",
 	  %% Which protocol and data link pair to use when transmitting the message
 	  %% to the targeted service. If a pair reports a failure, the next pair is tried.
 	  [
@@ -199,7 +199,7 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
 	},
 
 	%% Used to communicate with vehicles
-	{ "jlr.com/vin/",
+	{ "genivi.org/vin/",
 	  [
 	   { proto_json_rpc, { dlink_tcp_rpc, [ broadcast, { interface, "wlan0" } ] } },
 	   { proto_json_rpc, { server_3g, [ initiate_outbound ]} },
diff --git a/priv/config/rvi_yocto.config b/priv/config/rvi_yocto.config
index c0cb162..76a1064 100644
--- a/priv/config/rvi_yocto.config
+++ b/priv/config/rvi_yocto.config
@@ -61,12 +61,12 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
    %%   replaces the token.
    %%
    %%   Example:
-   %%     { node_service_prefix, "jlr.com/vin/$rvi_file(/etc/vin,default_vin)"},
+   %%     { node_service_prefix, "genivi.org/vin/$rvi_file(/etc/vin,default_vin)"},
    %%
    %%     will be substituted with the first line from the file
    %%     /etc/vin:
    %%
-   %%     { node_service_prefix, "jlr.com/vin/2GKEG25HXP4093669"},
+   %%     { node_service_prefix, "genivi.org/vin/2GKEG25HXP4093669"},
    %%
    %%     If /etc/vin cannot be opened, the value default_vin
    %%     will be used instead.
@@ -78,12 +78,12 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
    %%   to replace the token.
    %%
    %%   Example:
-   %%     { node_service_prefix, "jlr.com/vin/$rvi_env(VIN,default_vin)"},
+   %%     { node_service_prefix, "genivi.org/vin/$rvi_env(VIN,default_vin)"},
    %%
    %%     will be substituted with the value of the $VIN environment
    %%     variable:
    %%
-   %%     { node_service_prefix, "jlr.com/vin/2GKEG25HXP4093669"},
+   %%     { node_service_prefix, "genivi.org/vin/2GKEG25HXP4093669"},
    %%
    %%     If VIN is not a defined environment variable, the value
    %%     default_vin will be used instead.
@@ -98,12 +98,12 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
    %%   world wide unique.
    %%
    %%   Example:
-   %%     { node_service_prefix, "jlr.com/vin/$uuid(default_vin)"},
+   %%     { node_service_prefix, "genivi.org/vin/$uuid(default_vin)"},
    %%
    %%     will be substituted with the value of the root disk UUID:
    %%
    %%     { node_service_prefix,
-   %%       "jlr.com/vin/afc0a6d8-0264-4f8a-bb3e-51ff8655b51c"},
+   %%       "genivi.org/vin/afc0a6d8-0264-4f8a-bb3e-51ff8655b51c"},
    %%
    %%     If the root UUID cannot be retrieved, the value default_vin
    %%     will be used instead.
@@ -136,15 +136,15 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
      %%
      %% If a locally connected service registers itself as
      %% "hvac/fan_speed", and the node_service_prefix is
-     %% "jlr.com/vin/1234/", this node will announce the service
-     %% "jlr.com/vin/1234/hvac/fan_speed" as being available
+     %% "genivi.org/vin/1234/", this node will announce the service
+     %% "genivi.org/vin/1234/hvac/fan_speed" as being available
      %% to remotely connected rvi nodes.
      %%
      %% Two rvi nodes should never have the same node_service_prefix
      %% value unless all services add a system-wide unique name
      %% to it.
      %%
-     { node_service_prefix, "jlr.com/vin/$rvi_uuid(default_vin)/"},
+     { node_service_prefix, "genivi.org/vin/$rvi_uuid(default_vin)/"},
 
 
      %% Routing rules determine how to get a message targeting a specific
@@ -167,10 +167,10 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
 	%% The service prefix with the longest match against the service targeted
 	%% by the message will be used.
 	%%
-	%% Example: Targeted service = jlr.com/backend/sota/get_updates
+	%% Example: Targeted service = genivi.org/backend/sota/get_updates
 	%%
-	%% Prefix1: { "jlr.com/backend", [...]}
-	%% Prefix2: { "jlr.com/backend/sota", [...]}
+	%% Prefix1: { "genivi.org/backend", [...]}
+	%% Prefix2: { "genivi.org/backend/sota", [...]}
 	%%
 	%% Prefix2 will be used.
 	%%
@@ -189,7 +189,7 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
 	  ]
 	},
 
-	{ "jlr.com/backend/",
+	{ "genivi.org/backend/",
 	  %% Which protocol and data link pair to use when transmitting the message
 	  %% to the targeted service. If a pair reports a failure, the next pair is tried.
 	  [
@@ -200,7 +200,7 @@ LogLevel = Env("RVI_LOGLEVEL", notice).
 	},
 
 	%% Used to communicate with vehicles
-	{ "jlr.com/vin/",
+	{ "genivi.org/vin/",
 	  [
 	   { proto_json_rpc, { dlink_tcp_rpc, [ broadcast, { interface, "wlan0" } ] } },
 	   { proto_json_rpc, { server_3g, [ initiate_outbound ]} },