[53177] Update installation docs

Add install instructions for Ubuntu 14.04
Add install instructions for Raspbian
Add install instructions for Debian
Update build, readme files to point to install instructions

1 files changed, 113 insertions, 0 deletions

diff --git a/INSTALL_debian.md b/INSTALL_debian.md
new file mode 100644
index 0000000..cd8ef9c
--- /dev/null
+++ b/INSTALL_debian.md
@@ -0,0 +1,113 @@
+Copyright (C) 2014-2016, Jaguar Land Rover
+
+This document is licensed under Creative Commons
+Attribution-ShareAlike 4.0 International.
+
+**Version 0.5.0**
+
+# INSTALLATION OF RVI (DEBIAN) #
+
+This document describes the installation process for the RVI project 
+on a Debian 8 ("jessie") Linux machine. Packages are also available 
+for [Ubuntu](INSTALL_ubuntu.md) and [Raspbian](INSTALL_raspbian.md). 
+See ```BUILD.md``` for building from source.
+
+Please see ```README.md``` for a general description of the project
+and its structure.
+
+Please see ```CONFIGURE.md``` for details on configuring and launching
+the system once it has been built.
+
+The first milestone of the RVI project is the HVAC demo. Please see
+```hvac_demo/README.md``` for details on how to setup, launch and
+drive the demo.
+
+# READER ASSUMPTIONS #
+In order to build the system, the reader is assumed to be able to:
+
+1. Have a basic understanding of Linux system operations.
+2. Install packages on the system.
+
+Please note that the configuration process described in
+```CONFIGURE.md``` may have additional skill requirements.
+
+# PREREQUISITES #
+
+1. The Debian 8 system has the latest updates installed.
+2. The user can gain root access to install packages.
+3. There is at least 5GB of space availabled for packages and code.
+
+----
+
+# INSTALLATION PROCESS #
+
+## INSTALL DEPENDENCIES ##
+
+Install dependent libraries via ```apt-get``` - note you must be root:
+
+    apt-get install python-jsonrpclib
+
+## INSTALL ESL-ERLANG ##
+
+Install `esl-erlang` 18.2, or a later version 18 release:
+
+Tested packages of the latest versions of Erlang can be downloaded from 
+[packages.erlang-solutions.com](https://www.erlang-solutions.com/resources/download.html)
+
+Add the following line to your /etc/apt/sources.list
+
+    deb http://packages.erlang-solutions.com/debian jessie contrib
+
+Update and install `esl-erlang`:
+
+    apt-get update
+    apt-get install esl-erlang
+
+**If you receive an authentication error** (such as NO_PUBKEY): note 
+the hexadecimal value (e.g., 6D975C4791E7EE5E) and request the key:
+
+    apt-key adv --keyserver keyserver.ubuntu.com --recv-keys HEX
+
+where HEX is the hexadecimal value specified in the error. 
+Then rerun the ```update``` and ```install``` commands.
+
+## DOWNLOAD AND INSTALL RVI ##
+
+Download the RVI package from the remote location:
+
+    wget http://(TODO)/rvi_0.5.0-1_amd64.deb
+
+Then install RVI via dpkg:
+
+    sudo dpkg -i rvi_0.5.0-1_amd64.deb
+
+----
+
+## TEST THE RVI SYSTEM ##
+
+To confirm that RVI has started, use `systemctl` as root user:
+
+    systemctl status rvi
+
+Expected output:
+
+    ● rvi.service - Remote Vehicle Interaction Service
+       Loaded: loaded (/lib/systemd/system/rvi.service; disabled)
+       Active: active (running) since Mon 2016-02-22 14:16:27 PST; 15min ago
+      Process: 1922 ExecStart=/usr/bin/rvi_ctl -c /etc/rvi/rvi.config start (code=exited, status=0/SUCCESS)
+     Main PID: 1954 (run_erl)
+       CGroup: /system.slice/rvi.service
+           ├─1954 run_erl -daemon /tmp/rvi_1922/ /var/log/rvi exec erl -boot /tmp/rvi_1922/rvi/start -sname rvi -config /tmp/rvi_1922/rvi/sys -setcookie rvi_cookie
+           ├─1955 /usr/lib/erlang/erts-7.2/bin/beam.smp -- -root /usr/lib/erlang -progname erl -- -home /usr/lib/rvi_core -- -boot /tmp/rvi_1922/rvi/start -sname rvi -config /tmp/rvi_1922/rvi/sys -setcookie rvi_cookie
+           ├─1962 /usr/lib/erlang/erts-7.2/bin/epmd -daemon
+           ├─1983 /usr/lib/rvi_core/deps/bt/priv/bt
+           ├─1989 inet_gethost 4
+           └─1990 inet_gethost 4
+
+## CREATE A RELEASE ##
+
+The installer configures a release with default (insecure) credentials.
+
+See ```CONFIGURE.md``` for additional details on configuring and
+creating a developer and production release.
+