Imported Upstream version 4.2upstream/4.2

4 files changed, 61 insertions, 1278 deletions

diff --git a/etc/Makefile.in b/etc/Makefile.in
deleted file mode 100644
index 3f9f9f9b..00000000
--- a/etc/Makefile.in
+++ /dev/null
@@ -1,731 +0,0 @@
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# This is a dummy Makefile.am to get automake work flawlessly,
-# and also cooperate to make a distribution for `make dist'
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = etc
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(defaultdir)" "$(DESTDIR)$(nonpamdir)" \
-	"$(DESTDIR)$(sysconfdir)"
-DATA = $(default_DATA) $(nonpam_DATA) $(sysconf_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-GROUP_NAME_MAX_LENGTH = @GROUP_NAME_MAX_LENGTH@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBACL = @LIBACL@
-LIBATTR = @LIBATTR@
-LIBAUDIT = @LIBAUDIT@
-LIBCRACK = @LIBCRACK@
-LIBCRYPT = @LIBCRYPT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBMD = @LIBMD@
-LIBOBJS = @LIBOBJS@
-LIBPAM = @LIBPAM@
-LIBS = @LIBS@
-LIBSELINUX = @LIBSELINUX@
-LIBSEMANAGE = @LIBSEMANAGE@
-LIBSKEY = @LIBSKEY@
-LIBTCB = @LIBTCB@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-XMLCATALOG = @XMLCATALOG@
-XML_CATALOG_FILE = @XML_CATALOG_FILE@
-XSLTPROC = @XSLTPROC@
-YACC = @YACC@
-YFLAGS = @YFLAGS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-sysconf_DATA = login.defs
-defaultdir = $(sysconfdir)/default
-default_DATA = \
-	useradd
-
-nonpam_files = \
-	limits \
-	login.access
-
-@USE_PAM_FALSE@nonpamdir = $(sysconfdir)
-@USE_PAM_FALSE@nonpam_DATA = $(nonpam_files)
-EXTRA_DIST = \
-	$(nonpam_files) \
-	$(sysconf_DATA) \
-	$(default_DATA)
-
-SUBDIRS = pam.d
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu etc/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu etc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-defaultDATA: $(default_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(default_DATA)'; test -n "$(defaultdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(defaultdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(defaultdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(defaultdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(defaultdir)" || exit $$?; \
-	done
-
-uninstall-defaultDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(default_DATA)'; test -n "$(defaultdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(defaultdir)'; $(am__uninstall_files_from_dir)
-install-nonpamDATA: $(nonpam_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(nonpam_DATA)'; test -n "$(nonpamdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(nonpamdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(nonpamdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(nonpamdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(nonpamdir)" || exit $$?; \
-	done
-
-uninstall-nonpamDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(nonpam_DATA)'; test -n "$(nonpamdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(nonpamdir)'; $(am__uninstall_files_from_dir)
-install-sysconfDATA: $(sysconf_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \
-	done
-
-uninstall-sysconfDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(defaultdir)" "$(DESTDIR)$(nonpamdir)" "$(DESTDIR)$(sysconfdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-defaultDATA install-nonpamDATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-sysconfDATA
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-defaultDATA uninstall-nonpamDATA \
-	uninstall-sysconfDATA
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
-	install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am check check-am clean clean-generic clean-libtool \
-	ctags ctags-recursive distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-defaultDATA install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-nonpamDATA \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip install-sysconfDATA installcheck installcheck-am \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am uninstall-defaultDATA \
-	uninstall-nonpamDATA uninstall-sysconfDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/etc/login.access b/etc/login.access
index 078e3f88..3ed36880 100644
--- a/etc/login.access
+++ b/etc/login.access
@@ -1,4 +1,4 @@
-# $Id: login.access 1342 2007-11-10 23:46:11Z nekral-guest $
+# $Id$
 #
 # Login access control table.
 # 
diff --git a/etc/login.defs b/etc/login.defs
index 5b6fab35..5ac62d63 100644
--- a/etc/login.defs
+++ b/etc/login.defs
@@ -1,23 +1,23 @@
 #
 # /etc/login.defs - Configuration control definitions for the shadow package.
 #
-#	$Id: login.defs 3189 2010-03-26 11:53:06Z nekral-guest $
+#	$Id$
 #
 
 #
 # Delay in seconds before being allowed another attempt after a login failure
-# Note: When PAM is used, some modules may enfore a minimal delay (e.g.
-#       pam_unix enforces a 2s delay)
+# Note: When PAM is used, some modules may enforce a minimum delay (e.g.
+#       pam_unix(8) enforces a 2s delay)
 #
 FAIL_DELAY		3
 
 #
-# Enable logging and display of /var/log/faillog login failure info.
+# Enable logging and display of /var/log/faillog login(1) failure info.
 #
 FAILLOG_ENAB		yes
 
 #
-# Enable display of unknown usernames when login failures are recorded.
+# Enable display of unknown usernames when login(1) failures are recorded.
 #
 LOG_UNKFAIL_ENAB	no
 
@@ -27,7 +27,7 @@ LOG_UNKFAIL_ENAB	no
 LOG_OK_LOGINS		no
 
 #
-# Enable logging and display of /var/log/lastlog login time info.
+# Enable logging and display of /var/log/lastlog login(1) time info.
 #
 LASTLOG_ENAB		yes
 
@@ -50,13 +50,13 @@ OBSCURE_CHECKS_ENAB	yes
 PORTTIME_CHECKS_ENAB	yes
 
 #
-# Enable setting of ulimit, umask, and niceness from passwd gecos field.
+# Enable setting of ulimit, umask, and niceness from passwd(5) gecos field.
 #
 QUOTAS_ENAB		yes
 
 #
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
+# Enable "syslog" logging of su(1) activity - in addition to sulog file logging.
+# SYSLOG_SG_ENAB does the same for newgrp(1) and sg(1).
 #
 SYSLOG_SU_ENAB		yes
 SYSLOG_SG_ENAB		yes
@@ -64,13 +64,13 @@ SYSLOG_SG_ENAB		yes
 #
 # If defined, either full pathname of a file containing device names or
 # a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
+# from these devices.
 #
 CONSOLE		/etc/securetty
 #CONSOLE	console:tty01:tty02:tty03:tty04
 
 #
-# If defined, all su activity is logged to this file.
+# If defined, all su(1) activity is logged to this file.
 #
 #SULOG_FILE	/var/log/sulog
 
@@ -82,33 +82,33 @@ MOTD_FILE	/etc/motd
 #MOTD_FILE	/etc/motd:/usr/lib/news/news-motd
 
 #
-# If defined, this file will be output before each login prompt.
+# If defined, this file will be output before each login(1) prompt.
 #
 #ISSUE_FILE	/etc/issue
 
 #
 # If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
+# Each line of the file is in a format similar to "vt100  tty01".
 #
 #TTYTYPE_FILE	/etc/ttytype
 
 #
-# If defined, login failures will be logged here in a utmp format.
-# last, when invoked as lastb, will read /var/log/btmp, so...
+# If defined, login(1) failures will be logged here in a utmp format.
+# last(1), when invoked as lastb(1), will read /var/log/btmp, so...
 #
 FTMP_FILE	/var/log/btmp
 
 #
-# If defined, name of file whose presence which will inhibit non-root
-# logins.  The contents of this file should be a message indicating
+# If defined, name of file whose presence will inhibit non-root
+# logins.  The content of this file should be a message indicating
 # why logins are inhibited.
 #
 NOLOGINS_FILE	/etc/nologin
 
 #
 # If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
+# example, if this is defined as "su" then ps(1) will display the
+# command as "-su".  If not defined, then ps(1) will display the
 # name of the shell actually being run, e.g. something like "-sh".
 #
 SU_NAME		su
@@ -158,10 +158,10 @@ ENV_PATH	PATH=/bin:/usr/bin
 #	TTYGROUP	Login tty will be assigned this group ownership.
 #	TTYPERM		Login tty will be set to this permission.
 #
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
+# If you have a write(1) program which is "setgid" to a special group
+# which owns the terminals, define TTYGROUP as the number of such group
+# and TTYPERM as 0620.  Otherwise leave TTYGROUP commented out and
+# set TTYPERM to either 622 or 600.
 #
 TTYGROUP	tty
 TTYPERM		0600
@@ -183,13 +183,13 @@ ERASECHAR	0177
 KILLCHAR	025
 #ULIMIT		2097152
 
-# Default initial "umask" value used by login on non-PAM enabled systems.
-# Default "umask" value for pam_umask on PAM enabled systems.
-# UMASK is also used by useradd and newusers to set the mode of new home
-# directories.
+# Default initial "umask" value used by login(1) on non-PAM enabled systems.
+# Default "umask" value for pam_umask(8) on PAM enabled systems.
+# UMASK is also used by useradd(8) and newusers(8) to set the mode for new
+# home directories.
 # 022 is the default value, but 027, or even 077, could be considered
-# better for privacy. There is no One True Answer here: each sysadmin
-# must make up her mind.
+# for increased privacy. There is no One True Answer here: each sysadmin
+# must make up his/her mind.
 UMASK		022
 
 #
@@ -214,35 +214,43 @@ PASS_WARN_AGE	7
 SU_WHEEL_ONLY	no
 
 #
-# If compiled with cracklib support, where are the dictionaries
+# If compiled with cracklib support, sets the path to the dictionaries
 #
 CRACKLIB_DICTPATH	/var/cache/cracklib/cracklib_dict
 
 #
-# Min/max values for automatic uid selection in useradd
+# Min/max values for automatic uid selection in useradd(8)
 #
 UID_MIN			 1000
 UID_MAX			60000
 # System accounts
 SYS_UID_MIN		  101
 SYS_UID_MAX		  999
+# Extra per user uids
+SUB_UID_MIN		   100000
+SUB_UID_MAX		600100000
+SUB_UID_COUNT		    10000
 
 #
-# Min/max values for automatic gid selection in groupadd
+# Min/max values for automatic gid selection in groupadd(8)
 #
 GID_MIN			 1000
 GID_MAX			60000
 # System accounts
 SYS_GID_MIN		  101
 SYS_GID_MAX		  999
+# Extra per user group ids
+SUB_GID_MIN		   100000
+SUB_GID_MAX		600100000
+SUB_GID_COUNT		    10000
 
 #
-# Max number of login retries if password is bad
+# Max number of login(1) retries if password is bad
 #
 LOGIN_RETRIES		5
 
 #
-# Max time in seconds for login
+# Max time in seconds for login(1)
 #
 LOGIN_TIMEOUT		60
 
@@ -264,12 +272,12 @@ PASS_ALWAYS_WARN	yes
 #PASS_MAX_LEN		8
 
 #
-# Require password before chfn/chsh can make any changes.
+# Require password before chfn(1)/chsh(1) can make any changes.
 #
 CHFN_AUTH		yes
 
 #
-# Which fields may be changed by regular users using chfn - use
+# Which fields may be changed by regular users using chfn(1) - use
 # any combination of letters "frwh" (full name, room number, work
 # phone, home phone).  If not defined, no changes are allowed.
 # For backward compatibility, "yes" = "rwh" and "no" = "frwh".
@@ -294,13 +302,13 @@ CHFN_RESTRICT		rwh
 # Note: If you use PAM, it is recommended to use a value consistent with
 # the PAM modules configuration.
 #
-# This variable is deprecated. You should use ENCRYPT_METHOD.
+# This variable is deprecated. You should use ENCRYPT_METHOD instead.
 #
 #MD5_CRYPT_ENAB	no
 
 #
 # Only works if compiled with ENCRYPTMETHOD_SELECT defined:
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
+# If set to MD5, MD5-based algorithm will be used for encrypting password
 # If set to SHA256, SHA256-based algorithm will be used for encrypting password
 # If set to SHA512, SHA512-based algorithm will be used for encrypting password
 # If set to DES, DES-based algorithm will be used for encrypting password (default)
@@ -315,12 +323,12 @@ CHFN_RESTRICT		rwh
 # Only works if ENCRYPT_METHOD is set to SHA256 or SHA512.
 #
 # Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
+# With a lot of rounds, it is more difficult to brute-force the password.
+# However, more CPU resources will be needed to authenticate users if
+# this value is increased.
 #
 # If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
+# The values must be within the 1000-999999999 range.
 # If only one of the MIN or MAX values is set, then this value will be used.
 # If MIN > MAX, the highest value will be used.
 #
@@ -329,18 +337,18 @@ CHFN_RESTRICT		rwh
 
 #
 # List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
+# when logging in from the console (as determined by the CONSOLE
 # setting).  Default is none.
 #
 # Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
+# access to these groups, even when not logged in from the console.
 # How to do it is left as an exercise for the reader...
 #
 #CONSOLE_GROUPS		floppy:audio:cdrom
 
 #
 # Should login be allowed if we can't cd to the home directory?
-# Default in no.
+# Default is no.
 #
 DEFAULT_HOME	yes
 
@@ -362,14 +370,14 @@ ENVIRON_FILE	/etc/environment
 # (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
 # the same as gid, and username is the same as the primary group name.
 #
-# This also enables userdel to remove user groups if no members exist.
+# This also enables userdel(8) to remove user groups if no members exist.
 #
 USERGROUPS_ENAB yes
 
 #
-# If set to a non-nul number, the shadow utilities will make sure that
+# If set to a non-zero number, the shadow utilities will make sure that
 # groups never have more than this number of users on one line.
-# This permit to support split groups (groups split into multiple lines,
+# This permits to support split groups (groups split into multiple lines,
 # with the same group ID, to avoid limitation of the line length in the
 # group file).
 #
@@ -378,10 +386,10 @@ USERGROUPS_ENAB yes
 #MAX_MEMBERS_PER_GROUP	0
 
 #
-# If useradd should create home directories for users by default (non
-# system users only)
-# This option is overridden with the -M or -m flags on the useradd command
-# line.
+# If useradd(8) should create home directories for users by default (non
+# system users only).
+# This option is overridden with the -M or -m flags on the useradd(8)
+# command-line.
 #
 #CREATE_HOME     yes
 
diff --git a/etc/pam.d/Makefile.in b/etc/pam.d/Makefile.in
deleted file mode 100644
index 42d32fae..00000000
--- a/etc/pam.d/Makefile.in
+++ /dev/null
@@ -1,494 +0,0 @@
-# Makefile.in generated by automake 1.11.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# This is a dummy Makefile.am to get automake work flawlessly,
-# and also cooperate to make a distribution for `make dist'
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@ACCT_TOOLS_SETUID_TRUE@@USE_PAM_TRUE@am__append_1 = $(pamd_acct_tools_files)
-subdir = etc/pam.d
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(pamddir)"
-DATA = $(pamd_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-GROUP_NAME_MAX_LENGTH = @GROUP_NAME_MAX_LENGTH@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBACL = @LIBACL@
-LIBATTR = @LIBATTR@
-LIBAUDIT = @LIBAUDIT@
-LIBCRACK = @LIBCRACK@
-LIBCRYPT = @LIBCRYPT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBMD = @LIBMD@
-LIBOBJS = @LIBOBJS@
-LIBPAM = @LIBPAM@
-LIBS = @LIBS@
-LIBSELINUX = @LIBSELINUX@
-LIBSEMANAGE = @LIBSEMANAGE@
-LIBSKEY = @LIBSKEY@
-LIBTCB = @LIBTCB@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-XMLCATALOG = @XMLCATALOG@
-XML_CATALOG_FILE = @XML_CATALOG_FILE@
-XSLTPROC = @XSLTPROC@
-YACC = @YACC@
-YFLAGS = @YFLAGS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-pamd_files = \
-	chfn \
-	chsh \
-	groupmems \
-	login \
-	passwd \
-	su
-
-pamd_acct_tools_files = \
-	chage \
-	chgpasswd \
-	chpasswd \
-	groupadd \
-	groupdel \
-	groupmod \
-	newusers \
-	useradd \
-	userdel \
-	usermod
-
-@USE_PAM_TRUE@pamddir = $(sysconfdir)/pam.d
-@USE_PAM_TRUE@pamd_DATA = $(pamd_files) $(am__append_1)
-EXTRA_DIST = $(pamd_files) $(pamd_acct_tools_files)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu etc/pam.d/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu etc/pam.d/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-pamdDATA: $(pamd_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(pamd_DATA)'; test -n "$(pamddir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pamddir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pamddir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pamddir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pamddir)" || exit $$?; \
-	done
-
-uninstall-pamdDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pamd_DATA)'; test -n "$(pamddir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(pamddir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(pamddir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-pamdDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-pamdDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pamdDATA \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall uninstall-am uninstall-pamdDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: