diff options
Diffstat (limited to 'SDL_Core/tools/coding-style/cpplint.py')
| -rwxr-xr-x | SDL_Core/tools/coding-style/cpplint.py | 4023 |
1 files changed, 0 insertions, 4023 deletions
diff --git a/SDL_Core/tools/coding-style/cpplint.py b/SDL_Core/tools/coding-style/cpplint.py deleted file mode 100755 index 4d15272b3..000000000 --- a/SDL_Core/tools/coding-style/cpplint.py +++ /dev/null @@ -1,4023 +0,0 @@ -#!/usr/bin/python -# -# Copyright (c) 2009 Google Inc. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following disclaimer -# in the documentation and/or other materials provided with the -# distribution. -# * Neither the name of Google Inc. nor the names of its -# contributors may be used to endorse or promote products derived from -# this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Here are some issues that I've had people identify in my code during reviews, -# that I think are possible to flag automatically in a lint tool. If these were -# caught by lint, it would save time both for myself and that of my reviewers. -# Most likely, some of these are beyond the scope of the current lint framework, -# but I think it is valuable to retain these wish-list items even if they cannot -# be immediately implemented. -# -# Suggestions -# ----------- -# - Check for no 'explicit' for multi-arg ctor -# - Check for boolean assign RHS in parens -# - Check for ctor initializer-list colon position and spacing -# - Check that if there's a ctor, there should be a dtor -# - Check accessors that return non-pointer member variables are -# declared const -# - Check accessors that return non-const pointer member vars are -# *not* declared const -# - Check for using public includes for testing -# - Check for spaces between brackets in one-line inline method -# - Check for no assert() -# - Check for spaces surrounding operators -# - Check for 0 in pointer context (should be NULL) -# - Check for 0 in char context (should be '\0') -# - Check for camel-case method name conventions for methods -# that are not simple inline getters and setters -# - Do not indent namespace contents -# - Avoid inlining non-trivial constructors in header files -# - Check for old-school (void) cast for call-sites of functions -# ignored return value -# - Check gUnit usage of anonymous namespace -# - Check for class declaration order (typedefs, consts, enums, -# ctor(s?), dtor, friend declarations, methods, member vars) -# - -"""Does google-lint on c++ files. - -The goal of this script is to identify places in the code that *may* -be in non-compliance with google style. It does not attempt to fix -up these problems -- the point is to educate. It does also not -attempt to find all problems, or to ensure that everything it does -find is legitimately a problem. - -In particular, we can get very confused by /* and // inside strings! -We do a small hack, which is to ignore //'s with "'s after them on the -same line, but it is far from perfect (in either direction). -""" - -import codecs -import copy -import getopt -import math # for log -import os -import re -import sre_compile -import string -import sys -import unicodedata - - -_USAGE = """ -Syntax: cpplint.py [--verbose=#] [--output=vs7] [--filter=-x,+y,...] - [--counting=total|toplevel|detailed] - <file> [file] ... - - The style guidelines this tries to follow are those in - http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml - - Every problem is given a confidence score from 1-5, with 5 meaning we are - certain of the problem, and 1 meaning it could be a legitimate construct. - This will miss some errors, and is not a substitute for a code review. - - To suppress false-positive errors of a certain category, add a - 'NOLINT(category)' comment to the line. NOLINT or NOLINT(*) - suppresses errors of all categories on that line. - - The files passed in will be linted; at least one file must be provided. - Linted extensions are .cc, .cpp, and .h. Other file types will be ignored. - - Flags: - - output=vs7 - By default, the output is formatted to ease emacs parsing. Visual Studio - compatible output (vs7) may also be used. Other formats are unsupported. - - verbose=# - Specify a number 0-5 to restrict errors to certain verbosity levels. - - filter=-x,+y,... - Specify a comma-separated list of category-filters to apply: only - error messages whose category names pass the filters will be printed. - (Category names are printed with the message and look like - "[whitespace/indent]".) Filters are evaluated left to right. - "-FOO" and "FOO" means "do not print categories that start with FOO". - "+FOO" means "do print categories that start with FOO". - - Examples: --filter=-whitespace,+whitespace/braces - --filter=whitespace,runtime/printf,+runtime/printf_format - --filter=-,+build/include_what_you_use - - To see a list of all the categories used in cpplint, pass no arg: - --filter= - - counting=total|toplevel|detailed - The total number of errors found is always printed. If - 'toplevel' is provided, then the count of errors in each of - the top-level categories like 'build' and 'whitespace' will - also be printed. If 'detailed' is provided, then a count - is provided for each category like 'build/class'. - - root=subdir - The root directory used for deriving header guard CPP variable. - By default, the header guard CPP variable is calculated as the relative - path to the directory that contains .git, .hg, or .svn. When this flag - is specified, the relative path is calculated from the specified - directory. If the specified directory does not exist, this flag is - ignored. - - Examples: - Assuing that src/.git exists, the header guard CPP variables for - src/chrome/browser/ui/browser.h are: - - No flag => CHROME_BROWSER_UI_BROWSER_H_ - --root=chrome => BROWSER_UI_BROWSER_H_ - --root=chrome/browser => UI_BROWSER_H_ -""" - -# We categorize each error message we print. Here are the categories. -# We want an explicit list so we can list them all in cpplint --filter=. -# If you add a new error message with a new category, add it to the list -# here! cpplint_unittest.py should tell you if you forget to do this. -# \ used for clearer layout -- pylint: disable-msg=C6013 -_ERROR_CATEGORIES = [ - 'build/class', - 'build/deprecated', - 'build/endif_comment', - 'build/explicit_make_pair', - 'build/forward_decl', - 'build/header_guard', - 'build/include', - 'build/include_alpha', - 'build/include_order', - 'build/include_what_you_use', - 'build/namespaces', - 'build/printf_format', - 'build/storage_class', - 'legal/copyright', - 'readability/alt_tokens', - 'readability/braces', - 'readability/casting', - 'readability/check', - 'readability/constructors', - 'readability/fn_size', - 'readability/function', - 'readability/multiline_comment', - 'readability/multiline_string', - 'readability/namespace', - 'readability/nolint', - 'readability/streams', - 'readability/todo', - 'readability/utf8', - 'runtime/arrays', - 'runtime/casting', - 'runtime/explicit', - 'runtime/int', - 'runtime/init', - 'runtime/invalid_increment', - 'runtime/member_string_references', - 'runtime/memset', - 'runtime/operator', - 'runtime/printf', - 'runtime/printf_format', - 'runtime/references', - 'runtime/rtti', - 'runtime/sizeof', - 'runtime/string', - 'runtime/threadsafe_fn', - 'whitespace/blank_line', - 'whitespace/braces', - 'whitespace/comma', - 'whitespace/comments', - 'whitespace/empty_loop_body', - 'whitespace/end_of_line', - 'whitespace/ending_newline', - 'whitespace/forcolon', - 'whitespace/indent', - 'whitespace/labels', - 'whitespace/line_length', - 'whitespace/newline', - 'whitespace/operators', - 'whitespace/parens', - 'whitespace/semicolon', - 'whitespace/tab', - 'whitespace/todo' - ] - -# The default state of the category filter. This is overrided by the --filter= -# flag. By default all errors are on, so only add here categories that should be -# off by default (i.e., categories that must be enabled by the --filter= flags). -# All entries here should start with a '-' or '+', as in the --filter= flag. -_DEFAULT_FILTERS = ['-build/include_alpha'] - -# We used to check for high-bit characters, but after much discussion we -# decided those were OK, as long as they were in UTF-8 and didn't represent -# hard-coded international strings, which belong in a separate i18n file. - -# Headers that we consider STL headers. -_STL_HEADERS = frozenset([ - 'algobase.h', 'algorithm', 'alloc.h', 'bitset', 'deque', 'exception', - 'function.h', 'functional', 'hash_map', 'hash_map.h', 'hash_set', - 'hash_set.h', 'iterator', 'list', 'list.h', 'map', 'memory', 'new', - 'pair.h', 'pthread_alloc', 'queue', 'set', 'set.h', 'sstream', 'stack', - 'stl_alloc.h', 'stl_relops.h', 'type_traits.h', - 'utility', 'vector', 'vector.h', - ]) - - -# Non-STL C++ system headers. -_CPP_HEADERS = frozenset([ - 'algo.h', 'builtinbuf.h', 'bvector.h', 'cassert', 'cctype', - 'cerrno', 'cfloat', 'ciso646', 'climits', 'clocale', 'cmath', - 'complex', 'complex.h', 'csetjmp', 'csignal', 'cstdarg', 'cstddef', - 'cstdio', 'cstdlib', 'cstring', 'ctime', 'cwchar', 'cwctype', - 'defalloc.h', 'deque.h', 'editbuf.h', 'exception', 'fstream', - 'fstream.h', 'hashtable.h', 'heap.h', 'indstream.h', 'iomanip', - 'iomanip.h', 'ios', 'iosfwd', 'iostream', 'iostream.h', 'istream', - 'istream.h', 'iterator.h', 'limits', 'map.h', 'multimap.h', 'multiset.h', - 'numeric', 'ostream', 'ostream.h', 'parsestream.h', 'pfstream.h', - 'PlotFile.h', 'procbuf.h', 'pthread_alloc.h', 'rope', 'rope.h', - 'ropeimpl.h', 'SFile.h', 'slist', 'slist.h', 'stack.h', 'stdexcept', - 'stdiostream.h', 'streambuf.h', 'stream.h', 'strfile.h', 'string', - 'strstream', 'strstream.h', 'tempbuf.h', 'tree.h', 'typeinfo', 'valarray', - ]) - - -# Assertion macros. These are defined in base/logging.h and -# testing/base/gunit.h. Note that the _M versions need to come first -# for substring matching to work. -_CHECK_MACROS = [ - 'DCHECK', 'CHECK', - 'EXPECT_TRUE_M', 'EXPECT_TRUE', - 'ASSERT_TRUE_M', 'ASSERT_TRUE', - 'EXPECT_FALSE_M', 'EXPECT_FALSE', - 'ASSERT_FALSE_M', 'ASSERT_FALSE', - ] - -# Replacement macros for CHECK/DCHECK/EXPECT_TRUE/EXPECT_FALSE -_CHECK_REPLACEMENT = dict([(m, {}) for m in _CHECK_MACROS]) - -for op, replacement in [('==', 'EQ'), ('!=', 'NE'), - ('>=', 'GE'), ('>', 'GT'), - ('<=', 'LE'), ('<', 'LT')]: - _CHECK_REPLACEMENT['DCHECK'][op] = 'DCHECK_%s' % replacement - _CHECK_REPLACEMENT['CHECK'][op] = 'CHECK_%s' % replacement - _CHECK_REPLACEMENT['EXPECT_TRUE'][op] = 'EXPECT_%s' % replacement - _CHECK_REPLACEMENT['ASSERT_TRUE'][op] = 'ASSERT_%s' % replacement - _CHECK_REPLACEMENT['EXPECT_TRUE_M'][op] = 'EXPECT_%s_M' % replacement - _CHECK_REPLACEMENT['ASSERT_TRUE_M'][op] = 'ASSERT_%s_M' % replacement - -for op, inv_replacement in [('==', 'NE'), ('!=', 'EQ'), - ('>=', 'LT'), ('>', 'LE'), - ('<=', 'GT'), ('<', 'GE')]: - _CHECK_REPLACEMENT['EXPECT_FALSE'][op] = 'EXPECT_%s' % inv_replacement - _CHECK_REPLACEMENT['ASSERT_FALSE'][op] = 'ASSERT_%s' % inv_replacement - _CHECK_REPLACEMENT['EXPECT_FALSE_M'][op] = 'EXPECT_%s_M' % inv_replacement - _CHECK_REPLACEMENT['ASSERT_FALSE_M'][op] = 'ASSERT_%s_M' % inv_replacement - -# Alternative tokens and their replacements. For full list, see section 2.5 -# Alternative tokens [lex.digraph] in the C++ standard. -# -# Digraphs (such as '%:') are not included here since it's a mess to -# match those on a word boundary. -_ALT_TOKEN_REPLACEMENT = { - 'and': '&&', - 'bitor': '|', - 'or': '||', - 'xor': '^', - 'compl': '~', - 'bitand': '&', - 'and_eq': '&=', - 'or_eq': '|=', - 'xor_eq': '^=', - 'not': '!', - 'not_eq': '!=' - } - -# Compile regular expression that matches all the above keywords. The "[ =()]" -# bit is meant to avoid matching these keywords outside of boolean expressions. -# -# False positives include C-style multi-line comments (http://go/nsiut ) -# and multi-line strings (http://go/beujw ), but those have always been -# troublesome for cpplint. -_ALT_TOKEN_REPLACEMENT_PATTERN = re.compile( - r'[ =()](' + ('|'.join(_ALT_TOKEN_REPLACEMENT.keys())) + r')(?=[ (]|$)') - - -# These constants define types of headers for use with -# _IncludeState.CheckNextIncludeOrder(). -_C_SYS_HEADER = 1 -_CPP_SYS_HEADER = 2 -_LIKELY_MY_HEADER = 3 -_POSSIBLE_MY_HEADER = 4 -_OTHER_HEADER = 5 - -# These constants define the current inline assembly state -_NO_ASM = 0 # Outside of inline assembly block -_INSIDE_ASM = 1 # Inside inline assembly block -_END_ASM = 2 # Last line of inline assembly block -_BLOCK_ASM = 3 # The whole block is an inline assembly block - -# Match start of assembly blocks -_MATCH_ASM = re.compile(r'^\s*(?:asm|_asm|__asm|__asm__)' - r'(?:\s+(volatile|__volatile__))?' - r'\s*[{(]') - - -_regexp_compile_cache = {} - -# Finds occurrences of NOLINT or NOLINT(...). -_RE_SUPPRESSION = re.compile(r'\bNOLINT\b(\([^)]*\))?') - -# {str, set(int)}: a map from error categories to sets of linenumbers -# on which those errors are expected and should be suppressed. -_error_suppressions = {} - -# The root directory used for deriving header guard CPP variable. -# This is set by --root flag. -_root = None - -def ParseNolintSuppressions(filename, raw_line, linenum, error): - """Updates the global list of error-suppressions. - - Parses any NOLINT comments on the current line, updating the global - error_suppressions store. Reports an error if the NOLINT comment - was malformed. - - Args: - filename: str, the name of the input file. - raw_line: str, the line of input text, with comments. - linenum: int, the number of the current line. - error: function, an error handler. - """ - # FIXME(adonovan): "NOLINT(" is misparsed as NOLINT(*). - matched = _RE_SUPPRESSION.search(raw_line) - if matched: - category = matched.group(1) - if category in (None, '(*)'): # => "suppress all" - _error_suppressions.setdefault(None, set()).add(linenum) - else: - if category.startswith('(') and category.endswith(')'): - category = category[1:-1] - if category in _ERROR_CATEGORIES: - _error_suppressions.setdefault(category, set()).add(linenum) - else: - error(filename, linenum, 'readability/nolint', 5, - 'Unknown NOLINT error category: %s' % category) - - -def ResetNolintSuppressions(): - "Resets the set of NOLINT suppressions to empty." - _error_suppressions.clear() - - -def IsErrorSuppressedByNolint(category, linenum): - """Returns true if the specified error category is suppressed on this line. - - Consults the global error_suppressions map populated by - ParseNolintSuppressions/ResetNolintSuppressions. - - Args: - category: str, the category of the error. - linenum: int, the current line number. - Returns: - bool, True iff the error should be suppressed due to a NOLINT comment. - """ - return (linenum in _error_suppressions.get(category, set()) or - linenum in _error_suppressions.get(None, set())) - -def Match(pattern, s): - """Matches the string with the pattern, caching the compiled regexp.""" - # The regexp compilation caching is inlined in both Match and Search for - # performance reasons; factoring it out into a separate function turns out - # to be noticeably expensive. - if not pattern in _regexp_compile_cache: - _regexp_compile_cache[pattern] = sre_compile.compile(pattern) - return _regexp_compile_cache[pattern].match(s) - - -def Search(pattern, s): - """Searches the string for the pattern, caching the compiled regexp.""" - if not pattern in _regexp_compile_cache: - _regexp_compile_cache[pattern] = sre_compile.compile(pattern) - return _regexp_compile_cache[pattern].search(s) - - -class _IncludeState(dict): - """Tracks line numbers for includes, and the order in which includes appear. - - As a dict, an _IncludeState object serves as a mapping between include - filename and line number on which that file was included. - - Call CheckNextIncludeOrder() once for each header in the file, passing - in the type constants defined above. Calls in an illegal order will - raise an _IncludeError with an appropriate error message. - - """ - # self._section will move monotonically through this set. If it ever - # needs to move backwards, CheckNextIncludeOrder will raise an error. - _INITIAL_SECTION = 0 - _MY_H_SECTION = 1 - _C_SECTION = 2 - _CPP_SECTION = 3 - _OTHER_H_SECTION = 4 - - _TYPE_NAMES = { - _C_SYS_HEADER: 'C system header', - _CPP_SYS_HEADER: 'C++ system header', - _LIKELY_MY_HEADER: 'header this file implements', - _POSSIBLE_MY_HEADER: 'header this file may implement', - _OTHER_HEADER: 'other header', - } - _SECTION_NAMES = { - _INITIAL_SECTION: "... nothing. (This can't be an error.)", - _MY_H_SECTION: 'a header this file implements', - _C_SECTION: 'C system header', - _CPP_SECTION: 'C++ system header', - _OTHER_H_SECTION: 'other header', - } - - def __init__(self): - dict.__init__(self) - # The name of the current section. - self._section = self._INITIAL_SECTION - # The path of last found header. - self._last_header = '' - - def CanonicalizeAlphabeticalOrder(self, header_path): - """Returns a path canonicalized for alphabetical comparison. - - - replaces "-" with "_" so they both cmp the same. - - removes '-inl' since we don't require them to be after the main header. - - lowercase everything, just in case. - - Args: - header_path: Path to be canonicalized. - - Returns: - Canonicalized path. - """ - return header_path.replace('-inl.h', '.h').replace('-', '_').lower() - - def IsInAlphabeticalOrder(self, header_path): - """Check if a header is in alphabetical order with the previous header. - - Args: - header_path: Header to be checked. - - Returns: - Returns true if the header is in alphabetical order. - """ - canonical_header = self.CanonicalizeAlphabeticalOrder(header_path) - if self._last_header > canonical_header: - return False - self._last_header = canonical_header - return True - - def CheckNextIncludeOrder(self, header_type): - """Returns a non-empty error message if the next header is out of order. - - This function also updates the internal state to be ready to check - the next include. - - Args: - header_type: One of the _XXX_HEADER constants defined above. - - Returns: - The empty string if the header is in the right order, or an - error message describing what's wrong. - - """ - error_message = ('Found %s after %s' % - (self._TYPE_NAMES[header_type], - self._SECTION_NAMES[self._section])) - - last_section = self._section - - if header_type == _C_SYS_HEADER: - if self._section <= self._C_SECTION: - self._section = self._C_SECTION - else: - self._last_header = '' - return error_message - elif header_type == _CPP_SYS_HEADER: - if self._section <= self._CPP_SECTION: - self._section = self._CPP_SECTION - else: - self._last_header = '' - return error_message - elif header_type == _LIKELY_MY_HEADER: - if self._section <= self._MY_H_SECTION: - self._section = self._MY_H_SECTION - else: - self._section = self._OTHER_H_SECTION - elif header_type == _POSSIBLE_MY_HEADER: - if self._section <= self._MY_H_SECTION: - self._section = self._MY_H_SECTION - else: - # This will always be the fallback because we're not sure - # enough that the header is associated with this file. - self._section = self._OTHER_H_SECTION - else: - assert header_type == _OTHER_HEADER - self._section = self._OTHER_H_SECTION - - if last_section != self._section: - self._last_header = '' - - return '' - - -class _CppLintState(object): - """Maintains module-wide state..""" - - def __init__(self): - self.verbose_level = 1 # global setting. - self.error_count = 0 # global count of reported errors - # filters to apply when emitting error messages - self.filters = _DEFAULT_FILTERS[:] - self.counting = 'total' # In what way are we counting errors? - self.errors_by_category = {} # string to int dict storing error counts - - # output format: - # "emacs" - format that emacs can parse (default) - # "vs7" - format that Microsoft Visual Studio 7 can parse - self.output_format = 'emacs' - - def SetOutputFormat(self, output_format): - """Sets the output format for errors.""" - self.output_format = output_format - - def SetVerboseLevel(self, level): - """Sets the module's verbosity, and returns the previous setting.""" - last_verbose_level = self.verbose_level - self.verbose_level = level - return last_verbose_level - - def SetCountingStyle(self, counting_style): - """Sets the module's counting options.""" - self.counting = counting_style - - def SetFilters(self, filters): - """Sets the error-message filters. - - These filters are applied when deciding whether to emit a given - error message. - - Args: - filters: A string of comma-separated filters (eg "+whitespace/indent"). - Each filter should start with + or -; else we die. - - Raises: - ValueError: The comma-separated filters did not all start with '+' or '-'. - E.g. "-,+whitespace,-whitespace/indent,whitespace/badfilter" - """ - # Default filters always have less priority than the flag ones. - self.filters = _DEFAULT_FILTERS[:] - for filt in filters.split(','): - clean_filt = filt.strip() - if clean_filt: - self.filters.append(clean_filt) - for filt in self.filters: - if not (filt.startswith('+') or filt.startswith('-')): - raise ValueError('Every filter in --filters must start with + or -' - ' (%s does not)' % filt) - - def ResetErrorCounts(self): - """Sets the module's error statistic back to zero.""" - self.error_count = 0 - self.errors_by_category = {} - - def IncrementErrorCount(self, category): - """Bumps the module's error statistic.""" - self.error_count += 1 - if self.counting in ('toplevel', 'detailed'): - if self.counting != 'detailed': - category = category.split('/')[0] - if category not in self.errors_by_category: - self.errors_by_category[category] = 0 - self.errors_by_category[category] += 1 - - def PrintErrorCounts(self): - """Print a summary of errors by category, and the total.""" - for category, count in self.errors_by_category.iteritems(): - sys.stderr.write('Category \'%s\' errors found: %d\n' % - (category, count)) - sys.stderr.write('Total errors found: %d\n' % self.error_count) - -_cpplint_state = _CppLintState() - - -def _OutputFormat(): - """Gets the module's output format.""" - return _cpplint_state.output_format - - -def _SetOutputFormat(output_format): - """Sets the module's output format.""" - _cpplint_state.SetOutputFormat(output_format) - - -def _VerboseLevel(): - """Returns the module's verbosity setting.""" - return _cpplint_state.verbose_level - - -def _SetVerboseLevel(level): - """Sets the module's verbosity, and returns the previous setting.""" - return _cpplint_state.SetVerboseLevel(level) - - -def _SetCountingStyle(level): - """Sets the module's counting options.""" - _cpplint_state.SetCountingStyle(level) - - -def _Filters(): - """Returns the module's list of output filters, as a list.""" - return _cpplint_state.filters - - -def _SetFilters(filters): - """Sets the module's error-message filters. - - These filters are applied when deciding whether to emit a given - error message. - - Args: - filters: A string of comma-separated filters (eg "whitespace/indent"). - Each filter should start with + or -; else we die. - """ - _cpplint_state.SetFilters(filters) - - -class _FunctionState(object): - """Tracks current function name and the number of lines in its body.""" - - _NORMAL_TRIGGER = 250 # for --v=0, 500 for --v=1, etc. - _TEST_TRIGGER = 400 # about 50% more than _NORMAL_TRIGGER. - - def __init__(self): - self.in_a_function = False - self.lines_in_function = 0 - self.current_function = '' - - def Begin(self, function_name): - """Start analyzing function body. - - Args: - function_name: The name of the function being tracked. - """ - self.in_a_function = True - self.lines_in_function = 0 - self.current_function = function_name - - def Count(self): - """Count line in current function body.""" - if self.in_a_function: - self.lines_in_function += 1 - - def Check(self, error, filename, linenum): - """Report if too many lines in function body. - - Args: - error: The function to call with any errors found. - filename: The name of the current file. - linenum: The number of the line to check. - """ - if Match(r'T(EST|est)', self.current_function): - base_trigger = self._TEST_TRIGGER - else: - base_trigger = self._NORMAL_TRIGGER - trigger = base_trigger * 2**_VerboseLevel() - - if self.lines_in_function > trigger: - error_level = int(math.log(self.lines_in_function / base_trigger, 2)) - # 50 => 0, 100 => 1, 200 => 2, 400 => 3, 800 => 4, 1600 => 5, ... - if error_level > 5: - error_level = 5 - error(filename, linenum, 'readability/fn_size', error_level, - 'Small and focused functions are preferred:' - ' %s has %d non-comment lines' - ' (error triggered by exceeding %d lines).' % ( - self.current_function, self.lines_in_function, trigger)) - - def End(self): - """Stop analyzing function body.""" - self.in_a_function = False - - -class _IncludeError(Exception): - """Indicates a problem with the include order in a file.""" - pass - - -class FileInfo: - """Provides utility functions for filenames. - - FileInfo provides easy access to the components of a file's path - relative to the project root. - """ - - def __init__(self, filename): - self._filename = filename - - def FullName(self): - """Make Windows paths like Unix.""" - return os.path.abspath(self._filename).replace('\\', '/') - - def RepositoryName(self): - """FullName after removing the local path to the repository. - - If we have a real absolute path name here we can try to do something smart: - detecting the root of the checkout and truncating /path/to/checkout from - the name so that we get header guards that don't include things like - "C:\Documents and Settings\..." or "/home/username/..." in them and thus - people on different computers who have checked the source out to different - locations won't see bogus errors. - """ - fullname = self.FullName() - - if os.path.exists(fullname): - project_dir = os.path.dirname(fullname) - - if os.path.exists(os.path.join(project_dir, ".svn")): - # If there's a .svn file in the current directory, we recursively look - # up the directory tree for the top of the SVN checkout - root_dir = project_dir - one_up_dir = os.path.dirname(root_dir) - while os.path.exists(os.path.join(one_up_dir, ".svn")): - root_dir = os.path.dirname(root_dir) - one_up_dir = os.path.dirname(one_up_dir) - - prefix = os.path.commonprefix([root_dir, project_dir]) - return fullname[len(prefix) + 1:] - - # Not SVN <= 1.6? Try to find a git, hg, or svn top level directory by - # searching up from the current path. - root_dir = os.path.dirname(fullname) - while (root_dir != os.path.dirname(root_dir) and - not os.path.exists(os.path.join(root_dir, ".git")) and - not os.path.exists(os.path.join(root_dir, ".hg")) and - not os.path.exists(os.path.join(root_dir, ".svn"))): - root_dir = os.path.dirname(root_dir) - - if (os.path.exists(os.path.join(root_dir, ".git")) or - os.path.exists(os.path.join(root_dir, ".hg")) or - os.path.exists(os.path.join(root_dir, ".svn"))): - prefix = os.path.commonprefix([root_dir, project_dir]) - return fullname[len(prefix) + 1:] - - # Don't know what to do; header guard warnings may be wrong... - return fullname - - def Split(self): - """Splits the file into the directory, basename, and extension. - - For 'chrome/browser/browser.cc', Split() would - return ('chrome/browser', 'browser', '.cc') - - Returns: - A tuple of (directory, basename, extension). - """ - - googlename = self.RepositoryName() - project, rest = os.path.split(googlename) - return (project,) + os.path.splitext(rest) - - def BaseName(self): - """File base name - text after the final slash, before the final period.""" - return self.Split()[1] - - def Extension(self): - """File extension - text following the final period.""" - return self.Split()[2] - - def NoExtension(self): - """File has no source file extension.""" - return '/'.join(self.Split()[0:2]) - - def IsSource(self): - """File has a source file extension.""" - return self.Extension()[1:] in ('c', 'cc', 'cpp', 'cxx') - - -def _ShouldPrintError(category, confidence, linenum): - """If confidence >= verbose, category passes filter and is not suppressed.""" - - # There are three ways we might decide not to print an error message: - # a "NOLINT(category)" comment appears in the source, - # the verbosity level isn't high enough, or the filters filter it out. - if IsErrorSuppressedByNolint(category, linenum): - return False - if confidence < _cpplint_state.verbose_level: - return False - - is_filtered = False - for one_filter in _Filters(): - if one_filter.startswith('-'): - if category.startswith(one_filter[1:]): - is_filtered = True - elif one_filter.startswith('+'): - if category.startswith(one_filter[1:]): - is_filtered = False - else: - assert False # should have been checked for in SetFilter. - if is_filtered: - return False - - return True - - -def Error(filename, linenum, category, confidence, message): - """Logs the fact we've found a lint error. - - We log where the error was found, and also our confidence in the error, - that is, how certain we are this is a legitimate style regression, and - not a misidentification or a use that's sometimes justified. - - False positives can be suppressed by the use of - "cpplint(category)" comments on the offending line. These are - parsed into _error_suppressions. - - Args: - filename: The name of the file containing the error. - linenum: The number of the line containing the error. - category: A string used to describe the "category" this bug - falls under: "whitespace", say, or "runtime". Categories - may have a hierarchy separated by slashes: "whitespace/indent". - confidence: A number from 1-5 representing a confidence score for - the error, with 5 meaning that we are certain of the problem, - and 1 meaning that it could be a legitimate construct. - message: The error message. - """ - if _ShouldPrintError(category, confidence, linenum): - _cpplint_state.IncrementErrorCount(category) - if _cpplint_state.output_format == 'vs7': - sys.stderr.write('%s(%s): %s [%s] [%d]\n' % ( - filename, linenum, message, category, confidence)) - elif _cpplint_state.output_format == 'eclipse': - sys.stderr.write('%s:%s: warning: %s [%s] [%d]\n' % ( - filename, linenum, message, category, confidence)) - else: - sys.stderr.write('%s:%s: %s [%s] [%d]\n' % ( - filename, linenum, message, category, confidence)) - - -# Matches standard C++ escape esequences per 2.13.2.3 of the C++ standard. -_RE_PATTERN_CLEANSE_LINE_ESCAPES = re.compile( - r'\\([abfnrtv?"\\\']|\d+|x[0-9a-fA-F]+)') -# Matches strings. Escape codes should already be removed by ESCAPES. -_RE_PATTERN_CLEANSE_LINE_DOUBLE_QUOTES = re.compile(r'"[^"]*"') -# Matches characters. Escape codes should already be removed by ESCAPES. -_RE_PATTERN_CLEANSE_LINE_SINGLE_QUOTES = re.compile(r"'.'") -# Matches multi-line C++ comments. -# This RE is a little bit more complicated than one might expect, because we -# have to take care of space removals tools so we can handle comments inside -# statements better. -# The current rule is: We only clear spaces from both sides when we're at the -# end of the line. Otherwise, we try to remove spaces from the right side, -# if this doesn't work we try on left side but only if there's a non-character -# on the right. -_RE_PATTERN_CLEANSE_LINE_C_COMMENTS = re.compile( - r"""(\s*/\*.*\*/\s*$| - /\*.*\*/\s+| - \s+/\*.*\*/(?=\W)| - /\*.*\*/)""", re.VERBOSE) - - -def IsCppString(line): - """Does line terminate so, that the next symbol is in string constant. - - This function does not consider single-line nor multi-line comments. - - Args: - line: is a partial line of code starting from the 0..n. - - Returns: - True, if next character appended to 'line' is inside a - string constant. - """ - - line = line.replace(r'\\', 'XX') # after this, \\" does not match to \" - return ((line.count('"') - line.count(r'\"') - line.count("'\"'")) & 1) == 1 - - -def FindNextMultiLineCommentStart(lines, lineix): - """Find the beginning marker for a multiline comment.""" - while lineix < len(lines): - if lines[lineix].strip().startswith('/*'): - # Only return this marker if the comment goes beyond this line - if lines[lineix].strip().find('*/', 2) < 0: - return lineix - lineix += 1 - return len(lines) - - -def FindNextMultiLineCommentEnd(lines, lineix): - """We are inside a comment, find the end marker.""" - while lineix < len(lines): - if lines[lineix].strip().endswith('*/'): - return lineix - lineix += 1 - return len(lines) - - -def RemoveMultiLineCommentsFromRange(lines, begin, end): - """Clears a range of lines for multi-line comments.""" - # Having // dummy comments makes the lines non-empty, so we will not get - # unnecessary blank line warnings later in the code. - for i in range(begin, end): - lines[i] = '// dummy' - - -def RemoveMultiLineComments(filename, lines, error): - """Removes multiline (c-style) comments from lines.""" - lineix = 0 - while lineix < len(lines): - lineix_begin = FindNextMultiLineCommentStart(lines, lineix) - if lineix_begin >= len(lines): - return - lineix_end = FindNextMultiLineCommentEnd(lines, lineix_begin) - if lineix_end >= len(lines): - error(filename, lineix_begin + 1, 'readability/multiline_comment', 5, - 'Could not find end of multi-line comment') - return - RemoveMultiLineCommentsFromRange(lines, lineix_begin, lineix_end + 1) - lineix = lineix_end + 1 - - -def CleanseComments(line): - """Removes //-comments and single-line C-style /* */ comments. - - Args: - line: A line of C++ source. - - Returns: - The line with single-line comments removed. - """ - commentpos = line.find('//') - if commentpos != -1 and not IsCppString(line[:commentpos]): - line = line[:commentpos].rstrip() - # get rid of /* ... */ - return _RE_PATTERN_CLEANSE_LINE_C_COMMENTS.sub('', line) - - -class CleansedLines(object): - """Holds 3 copies of all lines with different preprocessing applied to them. - - 1) elided member contains lines without strings and comments, - 2) lines member contains lines without comments, and - 3) raw_lines member contains all the lines without processing. - All these three members are of <type 'list'>, and of the same length. - """ - - def __init__(self, lines): - self.elided = [] - self.lines = [] - self.raw_lines = lines - self.num_lines = len(lines) - for linenum in range(len(lines)): - self.lines.append(CleanseComments(lines[linenum])) - elided = self._CollapseStrings(lines[linenum]) - self.elided.append(CleanseComments(elided)) - - def NumLines(self): - """Returns the number of lines represented.""" - return self.num_lines - - @staticmethod - def _CollapseStrings(elided): - """Collapses strings and chars on a line to simple "" or '' blocks. - - We nix strings first so we're not fooled by text like '"http://"' - - Args: - elided: The line being processed. - - Returns: - The line with collapsed strings. - """ - if not _RE_PATTERN_INCLUDE.match(elided): - # Remove escaped characters first to make quote/single quote collapsing - # basic. Things that look like escaped characters shouldn't occur - # outside of strings and chars. - elided = _RE_PATTERN_CLEANSE_LINE_ESCAPES.sub('', elided) - elided = _RE_PATTERN_CLEANSE_LINE_SINGLE_QUOTES.sub("''", elided) - elided = _RE_PATTERN_CLEANSE_LINE_DOUBLE_QUOTES.sub('""', elided) - return elided - - -def FindEndOfExpressionInLine(line, startpos, depth, startchar, endchar): - """Find the position just after the matching endchar. - - Args: - line: a CleansedLines line. - startpos: start searching at this position. - depth: nesting level at startpos. - startchar: expression opening character. - endchar: expression closing character. - - Returns: - Index just after endchar. - """ - for i in xrange(startpos, len(line)): - if line[i] == startchar: - depth += 1 - elif line[i] == endchar: - depth -= 1 - if depth == 0: - return i + 1 - return -1 - - -def CloseExpression(clean_lines, linenum, pos): - """If input points to ( or { or [, finds the position that closes it. - - If lines[linenum][pos] points to a '(' or '{' or '[', finds the - linenum/pos that correspond to the closing of the expression. - - Args: - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - pos: A position on the line. - - Returns: - A tuple (line, linenum, pos) pointer *past* the closing brace, or - (line, len(lines), -1) if we never find a close. Note we ignore - strings and comments when matching; and the line we return is the - 'cleansed' line at linenum. - """ - - line = clean_lines.elided[linenum] - startchar = line[pos] - if startchar not in '({[': - return (line, clean_lines.NumLines(), -1) - if startchar == '(': endchar = ')' - if startchar == '[': endchar = ']' - if startchar == '{': endchar = '}' - - # Check first line - end_pos = FindEndOfExpressionInLine(line, pos, 0, startchar, endchar) - if end_pos > -1: - return (line, linenum, end_pos) - tail = line[pos:] - num_open = tail.count(startchar) - tail.count(endchar) - while linenum < clean_lines.NumLines() - 1: - linenum += 1 - line = clean_lines.elided[linenum] - delta = line.count(startchar) - line.count(endchar) - if num_open + delta <= 0: - return (line, linenum, - FindEndOfExpressionInLine(line, 0, num_open, startchar, endchar)) - num_open += delta - - # Did not find endchar before end of file, give up - return (line, clean_lines.NumLines(), -1) - -def CheckForCopyright(filename, lines, error): - """Logs an error if no Copyright message appears at the top of the file.""" - - # We'll say it should occur by line 10. Don't forget there's a - # dummy line at the front. - for line in xrange(1, min(len(lines), 11)): - if re.search(r'Copyright', lines[line], re.I): break - else: # means no copyright line was found - error(filename, 0, 'legal/copyright', 5, - 'No copyright message found. ' - 'You should have a line: "Copyright [year] <Copyright Owner>"') - - -def GetHeaderGuardCPPVariable(filename): - """Returns the CPP variable that should be used as a header guard. - - Args: - filename: The name of a C++ header file. - - Returns: - The CPP variable that should be used as a header guard in the - named file. - - """ - - # Restores original filename in case that cpplint is invoked from Emacs's - # flymake. - filename = re.sub(r'_flymake\.h$', '.h', filename) - filename = re.sub(r'/\.flymake/([^/]*)$', r'/\1', filename) - - fileinfo = FileInfo(filename) - file_path_from_root = fileinfo.RepositoryName() - if _root: - file_path_from_root = re.sub('^' + _root + os.sep, '', file_path_from_root) - return re.sub(r'[-./\s]', '_', file_path_from_root).upper() + '_' - - -def CheckForHeaderGuard(filename, lines, error): - """Checks that the file contains a header guard. - - Logs an error if no #ifndef header guard is present. For other - headers, checks that the full pathname is used. - - Args: - filename: The name of the C++ header file. - lines: An array of strings, each representing a line of the file. - error: The function to call with any errors found. - """ - - cppvar = GetHeaderGuardCPPVariable(filename) - - ifndef = None - ifndef_linenum = 0 - define = None - endif = None - endif_linenum = 0 - for linenum, line in enumerate(lines): - linesplit = line.split() - if len(linesplit) >= 2: - # find the first occurrence of #ifndef and #define, save arg - if not ifndef and linesplit[0] == '#ifndef': - # set ifndef to the header guard presented on the #ifndef line. - ifndef = linesplit[1] - ifndef_linenum = linenum - if not define and linesplit[0] == '#define': - define = linesplit[1] - # find the last occurrence of #endif, save entire line - if line.startswith('#endif'): - endif = line - endif_linenum = linenum - - if not ifndef: - error(filename, 0, 'build/header_guard', 5, - 'No #ifndef header guard found, suggested CPP variable is: %s' % - cppvar) - return - - if not define: - error(filename, 0, 'build/header_guard', 5, - 'No #define header guard found, suggested CPP variable is: %s' % - cppvar) - return - - # The guard should be PATH_FILE_H_, but we also allow PATH_FILE_H__ - # for backward compatibility. - if ifndef != cppvar: - error_level = 0 - if ifndef != cppvar + '_': - error_level = 5 - - ParseNolintSuppressions(filename, lines[ifndef_linenum], ifndef_linenum, - error) - error(filename, ifndef_linenum, 'build/header_guard', error_level, - '#ifndef header guard has wrong style, please use: %s' % cppvar) - - if define != ifndef: - error(filename, 0, 'build/header_guard', 5, - '#ifndef and #define don\'t match, suggested CPP variable is: %s' % - cppvar) - return - - if endif != ('#endif // %s' % cppvar): - error_level = 0 - if endif != ('#endif // %s' % (cppvar + '_')): - error_level = 5 - - ParseNolintSuppressions(filename, lines[endif_linenum], endif_linenum, - error) - error(filename, endif_linenum, 'build/header_guard', error_level, - '#endif line should be "#endif // %s"' % cppvar) - - -def CheckForUnicodeReplacementCharacters(filename, lines, error): - """Logs an error for each line containing Unicode replacement characters. - - These indicate that either the file contained invalid UTF-8 (likely) - or Unicode replacement characters (which it shouldn't). Note that - it's possible for this to throw off line numbering if the invalid - UTF-8 occurred adjacent to a newline. - - Args: - filename: The name of the current file. - lines: An array of strings, each representing a line of the file. - error: The function to call with any errors found. - """ - for linenum, line in enumerate(lines): - if u'\ufffd' in line: - error(filename, linenum, 'readability/utf8', 5, - 'Line contains invalid UTF-8 (or Unicode replacement character).') - - -def CheckForNewlineAtEOF(filename, lines, error): - """Logs an error if there is no newline char at the end of the file. - - Args: - filename: The name of the current file. - lines: An array of strings, each representing a line of the file. - error: The function to call with any errors found. - """ - - # The array lines() was created by adding two newlines to the - # original file (go figure), then splitting on \n. - # To verify that the file ends in \n, we just have to make sure the - # last-but-two element of lines() exists and is empty. - if len(lines) < 3 or lines[-2]: - error(filename, len(lines) - 2, 'whitespace/ending_newline', 5, - 'Could not find a newline character at the end of the file.') - - -def CheckForMultilineCommentsAndStrings(filename, clean_lines, linenum, error): - """Logs an error if we see /* ... */ or "..." that extend past one line. - - /* ... */ comments are legit inside macros, for one line. - Otherwise, we prefer // comments, so it's ok to warn about the - other. Likewise, it's ok for strings to extend across multiple - lines, as long as a line continuation character (backslash) - terminates each line. Although not currently prohibited by the C++ - style guide, it's ugly and unnecessary. We don't do well with either - in this lint program, so we warn about both. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - line = clean_lines.elided[linenum] - - # Remove all \\ (escaped backslashes) from the line. They are OK, and the - # second (escaped) slash may trigger later \" detection erroneously. - line = line.replace('\\\\', '') - - if line.count('/*') > line.count('*/'): - error(filename, linenum, 'readability/multiline_comment', 5, - 'Complex multi-line /*...*/-style comment found. ' - 'Lint may give bogus warnings. ' - 'Consider replacing these with //-style comments, ' - 'with #if 0...#endif, ' - 'or with more clearly structured multi-line comments.') - - if (line.count('"') - line.count('\\"')) % 2: - error(filename, linenum, 'readability/multiline_string', 5, - 'Multi-line string ("...") found. This lint script doesn\'t ' - 'do well with such strings, and may give bogus warnings. They\'re ' - 'ugly and unnecessary, and you should use concatenation instead".') - - -threading_list = ( - ('asctime(', 'asctime_r('), - ('ctime(', 'ctime_r('), - ('getgrgid(', 'getgrgid_r('), - ('getgrnam(', 'getgrnam_r('), - ('getlogin(', 'getlogin_r('), - ('getpwnam(', 'getpwnam_r('), - ('getpwuid(', 'getpwuid_r('), - ('gmtime(', 'gmtime_r('), - ('localtime(', 'localtime_r('), - ('rand(', 'rand_r('), - ('readdir(', 'readdir_r('), - ('strtok(', 'strtok_r('), - ('ttyname(', 'ttyname_r('), - ) - - -def CheckPosixThreading(filename, clean_lines, linenum, error): - """Checks for calls to thread-unsafe functions. - - Much code has been originally written without consideration of - multi-threading. Also, engineers are relying on their old experience; - they have learned posix before threading extensions were added. These - tests guide the engineers to use thread-safe functions (when using - posix directly). - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - line = clean_lines.elided[linenum] - for single_thread_function, multithread_safe_function in threading_list: - ix = line.find(single_thread_function) - # Comparisons made explicit for clarity -- pylint: disable-msg=C6403 - if ix >= 0 and (ix == 0 or (not line[ix - 1].isalnum() and - line[ix - 1] not in ('_', '.', '>'))): - error(filename, linenum, 'runtime/threadsafe_fn', 2, - 'Consider using ' + multithread_safe_function + - '...) instead of ' + single_thread_function + - '...) for improved thread safety.') - - -# Matches invalid increment: *count++, which moves pointer instead of -# incrementing a value. -_RE_PATTERN_INVALID_INCREMENT = re.compile( - r'^\s*\*\w+(\+\+|--);') - - -def CheckInvalidIncrement(filename, clean_lines, linenum, error): - """Checks for invalid increment *count++. - - For example following function: - void increment_counter(int* count) { - *count++; - } - is invalid, because it effectively does count++, moving pointer, and should - be replaced with ++*count, (*count)++ or *count += 1. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - line = clean_lines.elided[linenum] - if _RE_PATTERN_INVALID_INCREMENT.match(line): - error(filename, linenum, 'runtime/invalid_increment', 5, - 'Changing pointer instead of value (or unused value of operator*).') - - -class _BlockInfo(object): - """Stores information about a generic block of code.""" - - def __init__(self, seen_open_brace): - self.seen_open_brace = seen_open_brace - self.open_parentheses = 0 - self.inline_asm = _NO_ASM - - def CheckBegin(self, filename, clean_lines, linenum, error): - """Run checks that applies to text up to the opening brace. - - This is mostly for checking the text after the class identifier - and the "{", usually where the base class is specified. For other - blocks, there isn't much to check, so we always pass. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - pass - - def CheckEnd(self, filename, clean_lines, linenum, error): - """Run checks that applies to text after the closing brace. - - This is mostly used for checking end of namespace comments. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - pass - - -class _ClassInfo(_BlockInfo): - """Stores information about a class.""" - - def __init__(self, name, class_or_struct, clean_lines, linenum): - _BlockInfo.__init__(self, False) - self.name = name - self.starting_linenum = linenum - self.is_derived = False - if class_or_struct == 'struct': - self.access = 'public' - else: - self.access = 'private' - - # Try to find the end of the class. This will be confused by things like: - # class A { - # } *x = { ... - # - # But it's still good enough for CheckSectionSpacing. - self.last_line = 0 - depth = 0 - for i in range(linenum, clean_lines.NumLines()): - line = clean_lines.elided[i] - depth += line.count('{') - line.count('}') - if not depth: - self.last_line = i - break - - def CheckBegin(self, filename, clean_lines, linenum, error): - # Look for a bare ':' - if Search('(^|[^:]):($|[^:])', clean_lines.elided[linenum]): - self.is_derived = True - - -class _NamespaceInfo(_BlockInfo): - """Stores information about a namespace.""" - - def __init__(self, name, linenum): - _BlockInfo.__init__(self, False) - self.name = name or '' - self.starting_linenum = linenum - - def CheckEnd(self, filename, clean_lines, linenum, error): - """Check end of namespace comments.""" - line = clean_lines.raw_lines[linenum] - - # Check how many lines is enclosed in this namespace. Don't issue - # warning for missing namespace comments if there aren't enough - # lines. However, do apply checks if there is already an end of - # namespace comment and it's incorrect. - # - # TODO(unknown): We always want to check end of namespace comments - # if a namespace is large, but sometimes we also want to apply the - # check if a short namespace contained nontrivial things (something - # other than forward declarations). There is currently no logic on - # deciding what these nontrivial things are, so this check is - # triggered by namespace size only, which works most of the time. - if (linenum - self.starting_linenum < 10 - and not Match(r'};*\s*(//|/\*).*\bnamespace\b', line)): - return - - # Look for matching comment at end of namespace. - # - # Note that we accept C style "/* */" comments for terminating - # namespaces, so that code that terminate namespaces inside - # preprocessor macros can be cpplint clean. Example: http://go/nxpiz - # - # We also accept stuff like "// end of namespace <name>." with the - # period at the end. - # - # Besides these, we don't accept anything else, otherwise we might - # get false negatives when existing comment is a substring of the - # expected namespace. Example: http://go/ldkdc, http://cl/23548205 - if self.name: - # Named namespace - if not Match((r'};*\s*(//|/\*).*\bnamespace\s+' + re.escape(self.name) + - r'[\*/\.\\\s]*$'), - line): - error(filename, linenum, 'readability/namespace', 5, - 'Namespace should be terminated with "// namespace %s"' % - self.name) - else: - # Anonymous namespace - if not Match(r'};*\s*(//|/\*).*\bnamespace[\*/\.\\\s]*$', line): - error(filename, linenum, 'readability/namespace', 5, - 'Namespace should be terminated with "// namespace"') - - -class _PreprocessorInfo(object): - """Stores checkpoints of nesting stacks when #if/#else is seen.""" - - def __init__(self, stack_before_if): - # The entire nesting stack before #if - self.stack_before_if = stack_before_if - - # The entire nesting stack up to #else - self.stack_before_else = [] - - # Whether we have already seen #else or #elif - self.seen_else = False - - -class _NestingState(object): - """Holds states related to parsing braces.""" - - def __init__(self): - # Stack for tracking all braces. An object is pushed whenever we - # see a "{", and popped when we see a "}". Only 3 types of - # objects are possible: - # - _ClassInfo: a class or struct. - # - _NamespaceInfo: a namespace. - # - _BlockInfo: some other type of block. - self.stack = [] - - # Stack of _PreprocessorInfo objects. - self.pp_stack = [] - - def SeenOpenBrace(self): - """Check if we have seen the opening brace for the innermost block. - - Returns: - True if we have seen the opening brace, False if the innermost - block is still expecting an opening brace. - """ - return (not self.stack) or self.stack[-1].seen_open_brace - - def InNamespaceBody(self): - """Check if we are currently one level inside a namespace body. - - Returns: - True if top of the stack is a namespace block, False otherwise. - """ - return self.stack and isinstance(self.stack[-1], _NamespaceInfo) - - def UpdatePreprocessor(self, line): - """Update preprocessor stack. - - We need to handle preprocessors due to classes like this: - #ifdef SWIG - struct ResultDetailsPageElementExtensionPoint { - #else - struct ResultDetailsPageElementExtensionPoint : public Extension { - #endif - (see http://go/qwddn for original example) - - We make the following assumptions (good enough for most files): - - Preprocessor condition evaluates to true from #if up to first - #else/#elif/#endif. - - - Preprocessor condition evaluates to false from #else/#elif up - to #endif. We still perform lint checks on these lines, but - these do not affect nesting stack. - - Args: - line: current line to check. - """ - if Match(r'^\s*#\s*(if|ifdef|ifndef)\b', line): - # Beginning of #if block, save the nesting stack here. The saved - # stack will allow us to restore the parsing state in the #else case. - self.pp_stack.append(_PreprocessorInfo(copy.deepcopy(self.stack))) - elif Match(r'^\s*#\s*(else|elif)\b', line): - # Beginning of #else block - if self.pp_stack: - if not self.pp_stack[-1].seen_else: - # This is the first #else or #elif block. Remember the - # whole nesting stack up to this point. This is what we - # keep after the #endif. - self.pp_stack[-1].seen_else = True - self.pp_stack[-1].stack_before_else = copy.deepcopy(self.stack) - - # Restore the stack to how it was before the #if - self.stack = copy.deepcopy(self.pp_stack[-1].stack_before_if) - else: - # TODO(unknown): unexpected #else, issue warning? - pass - elif Match(r'^\s*#\s*endif\b', line): - # End of #if or #else blocks. - if self.pp_stack: - # If we saw an #else, we will need to restore the nesting - # stack to its former state before the #else, otherwise we - # will just continue from where we left off. - if self.pp_stack[-1].seen_else: - # Here we can just use a shallow copy since we are the last - # reference to it. - self.stack = self.pp_stack[-1].stack_before_else - # Drop the corresponding #if - self.pp_stack.pop() - else: - # TODO(unknown): unexpected #endif, issue warning? - pass - - def Update(self, filename, clean_lines, linenum, error): - """Update nesting state with current line. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - line = clean_lines.elided[linenum] - - # Update pp_stack first - self.UpdatePreprocessor(line) - - # Count parentheses. This is to avoid adding struct arguments to - # the nesting stack. - if self.stack: - inner_block = self.stack[-1] - depth_change = line.count('(') - line.count(')') - inner_block.open_parentheses += depth_change - - # Also check if we are starting or ending an inline assembly block. - if inner_block.inline_asm in (_NO_ASM, _END_ASM): - if (depth_change != 0 and - inner_block.open_parentheses == 1 and - _MATCH_ASM.match(line)): - # Enter assembly block - inner_block.inline_asm = _INSIDE_ASM - else: - # Not entering assembly block. If previous line was _END_ASM, - # we will now shift to _NO_ASM state. - inner_block.inline_asm = _NO_ASM - elif (inner_block.inline_asm == _INSIDE_ASM and - inner_block.open_parentheses == 0): - # Exit assembly block - inner_block.inline_asm = _END_ASM - - # Consume namespace declaration at the beginning of the line. Do - # this in a loop so that we catch same line declarations like this: - # namespace proto2 { namespace bridge { class MessageSet; } } - while True: - # Match start of namespace. The "\b\s*" below catches namespace - # declarations even if it weren't followed by a whitespace, this - # is so that we don't confuse our namespace checker. The - # missing spaces will be flagged by CheckSpacing. - namespace_decl_match = Match(r'^\s*namespace\b\s*([:\w]+)?(.*)$', line) - if not namespace_decl_match: - break - - new_namespace = _NamespaceInfo(namespace_decl_match.group(1), linenum) - self.stack.append(new_namespace) - - line = namespace_decl_match.group(2) - if line.find('{') != -1: - new_namespace.seen_open_brace = True - line = line[line.find('{') + 1:] - - # Look for a class declaration in whatever is left of the line - # after parsing namespaces. The regexp accounts for decorated classes - # such as in: - # class LOCKABLE API Object { - # }; - # - # Templates with class arguments may confuse the parser, for example: - # template <class T - # class Comparator = less<T>, - # class Vector = vector<T> > - # class HeapQueue { - # - # Because this parser has no nesting state about templates, by the - # time it saw "class Comparator", it may think that it's a new class. - # Nested templates have a similar problem: - # template < - # typename ExportedType, - # typename TupleType, - # template <typename, typename> class ImplTemplate> - # - # To avoid these cases, we ignore classes that are followed by '=' or '>' - class_decl_match = Match( - r'\s*(template\s*<[\w\s<>,:]*>\s*)?' - '(class|struct)\s+([A-Z_]+\s+)*(\w+(?:::\w+)*)' - '(([^=>]|<[^<>]*>)*)$', line) - if (class_decl_match and - (not self.stack or self.stack[-1].open_parentheses == 0)): - self.stack.append(_ClassInfo( - class_decl_match.group(4), class_decl_match.group(2), - clean_lines, linenum)) - line = class_decl_match.group(5) - - # If we have not yet seen the opening brace for the innermost block, - # run checks here. - if not self.SeenOpenBrace(): - self.stack[-1].CheckBegin(filename, clean_lines, linenum, error) - - # Update access control if we are inside a class/struct - if self.stack and isinstance(self.stack[-1], _ClassInfo): - access_match = Match(r'\s*(public|private|protected)\s*:', line) - if access_match: - self.stack[-1].access = access_match.group(1) - - # Consume braces or semicolons from what's left of the line - while True: - # Match first brace, semicolon, or closed parenthesis. - matched = Match(r'^[^{;)}]*([{;)}])(.*)$', line) - if not matched: - break - - token = matched.group(1) - if token == '{': - # If namespace or class hasn't seen a opening brace yet, mark - # namespace/class head as complete. Push a new block onto the - # stack otherwise. - if not self.SeenOpenBrace(): - self.stack[-1].seen_open_brace = True - else: - self.stack.append(_BlockInfo(True)) - if _MATCH_ASM.match(line): - self.stack[-1].inline_asm = _BLOCK_ASM - elif token == ';' or token == ')': - # If we haven't seen an opening brace yet, but we already saw - # a semicolon, this is probably a forward declaration. Pop - # the stack for these. - # - # Similarly, if we haven't seen an opening brace yet, but we - # already saw a closing parenthesis, then these are probably - # function arguments with extra "class" or "struct" keywords. - # Also pop these stack for these. - if not self.SeenOpenBrace(): - self.stack.pop() - else: # token == '}' - # Perform end of block checks and pop the stack. - if self.stack: - self.stack[-1].CheckEnd(filename, clean_lines, linenum, error) - self.stack.pop() - line = matched.group(2) - - def InnermostClass(self): - """Get class info on the top of the stack. - - Returns: - A _ClassInfo object if we are inside a class, or None otherwise. - """ - for i in range(len(self.stack), 0, -1): - classinfo = self.stack[i - 1] - if isinstance(classinfo, _ClassInfo): - return classinfo - return None - - def CheckClassFinished(self, filename, error): - """Checks that all classes have been completely parsed. - - Call this when all lines in a file have been processed. - Args: - filename: The name of the current file. - error: The function to call with any errors found. - """ - # Note: This test can result in false positives if #ifdef constructs - # get in the way of brace matching. See the testBuildClass test in - # cpplint_unittest.py for an example of this. - for obj in self.stack: - if isinstance(obj, _ClassInfo): - error(filename, obj.starting_linenum, 'build/class', 5, - 'Failed to find complete declaration of class %s' % - obj.name) - - -def CheckForNonStandardConstructs(filename, clean_lines, linenum, - nesting_state, error): - """Logs an error if we see certain non-ANSI constructs ignored by gcc-2. - - Complain about several constructs which gcc-2 accepts, but which are - not standard C++. Warning about these in lint is one way to ease the - transition to new compilers. - - put storage class first (e.g. "static const" instead of "const static"). - - "%lld" instead of %qd" in printf-type functions. - - "%1$d" is non-standard in printf-type functions. - - "\%" is an undefined character escape sequence. - - text after #endif is not allowed. - - invalid inner-style forward declaration. - - >? and <? operators, and their >?= and <?= cousins. - - Additionally, check for constructor/destructor style violations and reference - members, as it is very convenient to do so while checking for - gcc-2 compliance. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - nesting_state: A _NestingState instance which maintains information about - the current stack of nested blocks being parsed. - error: A callable to which errors are reported, which takes 4 arguments: - filename, line number, error level, and message - """ - - # Remove comments from the line, but leave in strings for now. - line = clean_lines.lines[linenum] - - if Search(r'printf\s*\(.*".*%[-+ ]?\d*q', line): - error(filename, linenum, 'runtime/printf_format', 3, - '%q in format strings is deprecated. Use %ll instead.') - - if Search(r'printf\s*\(.*".*%\d+\$', line): - error(filename, linenum, 'runtime/printf_format', 2, - '%N$ formats are unconventional. Try rewriting to avoid them.') - - # Remove escaped backslashes before looking for undefined escapes. - line = line.replace('\\\\', '') - - if Search(r'("|\').*\\(%|\[|\(|{)', line): - error(filename, linenum, 'build/printf_format', 3, - '%, [, (, and { are undefined character escapes. Unescape them.') - - # For the rest, work with both comments and strings removed. - line = clean_lines.elided[linenum] - - if Search(r'\b(const|volatile|void|char|short|int|long' - r'|float|double|signed|unsigned' - r'|schar|u?int8|u?int16|u?int32|u?int64)' - r'\s+(register|static|extern|typedef)\b', - line): - error(filename, linenum, 'build/storage_class', 5, - 'Storage class (static, extern, typedef, etc) should be first.') - - if Match(r'\s*#\s*endif\s*[^/\s]+', line): - error(filename, linenum, 'build/endif_comment', 5, - 'Uncommented text after #endif is non-standard. Use a comment.') - - if Match(r'\s*class\s+(\w+\s*::\s*)+\w+\s*;', line): - error(filename, linenum, 'build/forward_decl', 5, - 'Inner-style forward declarations are invalid. Remove this line.') - - if Search(r'(\w+|[+-]?\d+(\.\d*)?)\s*(<|>)\?=?\s*(\w+|[+-]?\d+)(\.\d*)?', - line): - error(filename, linenum, 'build/deprecated', 3, - '>? and <? (max and min) operators are non-standard and deprecated.') - - if Search(r'^\s*const\s*string\s*&\s*\w+\s*;', line): - # TODO(unknown): Could it be expanded safely to arbitrary references, - # without triggering too many false positives? The first - # attempt triggered 5 warnings for mostly benign code in the regtest, hence - # the restriction. - # Here's the original regexp, for the reference: - # type_name = r'\w+((\s*::\s*\w+)|(\s*<\s*\w+?\s*>))?' - # r'\s*const\s*' + type_name + '\s*&\s*\w+\s*;' - error(filename, linenum, 'runtime/member_string_references', 2, - 'const string& members are dangerous. It is much better to use ' - 'alternatives, such as pointers or simple constants.') - - # Everything else in this function operates on class declarations. - # Return early if the top of the nesting stack is not a class, or if - # the class head is not completed yet. - classinfo = nesting_state.InnermostClass() - if not classinfo or not classinfo.seen_open_brace: - return - - # The class may have been declared with namespace or classname qualifiers. - # The constructor and destructor will not have those qualifiers. - base_classname = classinfo.name.split('::')[-1] - - # Look for single-argument constructors that aren't marked explicit. - # Technically a valid construct, but against style. - args = Match(r'\s+(?:inline\s+)?%s\s*\(([^,()]+)\)' - % re.escape(base_classname), - line) - if (args and - args.group(1) != 'void' and - not Match(r'(const\s+)?%s\s*(?:<\w+>\s*)?&' % re.escape(base_classname), - args.group(1).strip())): - error(filename, linenum, 'runtime/explicit', 5, - 'Single-argument constructors should be marked explicit.') - - -def CheckSpacingForFunctionCall(filename, line, linenum, error): - """Checks for the correctness of various spacing around function calls. - - Args: - filename: The name of the current file. - line: The text of the line to check. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - - # Since function calls often occur inside if/for/while/switch - # expressions - which have their own, more liberal conventions - we - # first see if we should be looking inside such an expression for a - # function call, to which we can apply more strict standards. - fncall = line # if there's no control flow construct, look at whole line - for pattern in (r'\bif\s*\((.*)\)\s*{', - r'\bfor\s*\((.*)\)\s*{', - r'\bwhile\s*\((.*)\)\s*[{;]', - r'\bswitch\s*\((.*)\)\s*{'): - match = Search(pattern, line) - if match: - fncall = match.group(1) # look inside the parens for function calls - break - - # Except in if/for/while/switch, there should never be space - # immediately inside parens (eg "f( 3, 4 )"). We make an exception - # for nested parens ( (a+b) + c ). Likewise, there should never be - # a space before a ( when it's a function argument. I assume it's a - # function argument when the char before the whitespace is legal in - # a function name (alnum + _) and we're not starting a macro. Also ignore - # pointers and references to arrays and functions coz they're too tricky: - # we use a very simple way to recognize these: - # " (something)(maybe-something)" or - # " (something)(maybe-something," or - # " (something)[something]" - # Note that we assume the contents of [] to be short enough that - # they'll never need to wrap. - if ( # Ignore control structures. - not Search(r'\b(if|for|while|switch|return|delete)\b', fncall) and - # Ignore pointers/references to functions. - not Search(r' \([^)]+\)\([^)]*(\)|,$)', fncall) and - # Ignore pointers/references to arrays. - not Search(r' \([^)]+\)\[[^\]]+\]', fncall)): - if Search(r'\w\s*\(\s(?!\s*\\$)', fncall): # a ( used for a fn call - error(filename, linenum, 'whitespace/parens', 4, - 'Extra space after ( in function call') - elif Search(r'\(\s+(?!(\s*\\)|\()', fncall): - error(filename, linenum, 'whitespace/parens', 2, - 'Extra space after (') - if (Search(r'\w\s+\(', fncall) and - not Search(r'#\s*define|typedef', fncall) and - not Search(r'\w\s+\((\w+::)?\*\w+\)\(', fncall)): - error(filename, linenum, 'whitespace/parens', 4, - 'Extra space before ( in function call') - # If the ) is followed only by a newline or a { + newline, assume it's - # part of a control statement (if/while/etc), and don't complain - if Search(r'[^)]\s+\)\s*[^{\s]', fncall): - # If the closing parenthesis is preceded by only whitespaces, - # try to give a more descriptive error message. - if Search(r'^\s+\)', fncall): - error(filename, linenum, 'whitespace/parens', 2, - 'Closing ) should be moved to the previous line') - else: - error(filename, linenum, 'whitespace/parens', 2, - 'Extra space before )') - - -def IsBlankLine(line): - """Returns true if the given line is blank. - - We consider a line to be blank if the line is empty or consists of - only white spaces. - - Args: - line: A line of a string. - - Returns: - True, if the given line is blank. - """ - return not line or line.isspace() - - -def CheckForFunctionLengths(filename, clean_lines, linenum, - function_state, error): - """Reports for long function bodies. - - For an overview why this is done, see: - http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml#Write_Short_Functions - - Uses a simplistic algorithm assuming other style guidelines - (especially spacing) are followed. - Only checks unindented functions, so class members are unchecked. - Trivial bodies are unchecked, so constructors with huge initializer lists - may be missed. - Blank/comment lines are not counted so as to avoid encouraging the removal - of vertical space and comments just to get through a lint check. - NOLINT *on the last line of a function* disables this check. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - function_state: Current function name and lines in body so far. - error: The function to call with any errors found. - """ - lines = clean_lines.lines - line = lines[linenum] - raw = clean_lines.raw_lines - raw_line = raw[linenum] - joined_line = '' - - starting_func = False - regexp = r'(\w(\w|::|\*|\&|\s)*)\(' # decls * & space::name( ... - match_result = Match(regexp, line) - if match_result: - # If the name is all caps and underscores, figure it's a macro and - # ignore it, unless it's TEST or TEST_F. - function_name = match_result.group(1).split()[-1] - if function_name == 'TEST' or function_name == 'TEST_F' or ( - not Match(r'[A-Z_]+$', function_name)): - starting_func = True - - if starting_func: - body_found = False - for start_linenum in xrange(linenum, clean_lines.NumLines()): - start_line = lines[start_linenum] - joined_line += ' ' + start_line.lstrip() - if Search(r'(;|})', start_line): # Declarations and trivial functions - body_found = True - break # ... ignore - elif Search(r'{', start_line): - body_found = True - function = Search(r'((\w|:)*)\(', line).group(1) - if Match(r'TEST', function): # Handle TEST... macros - parameter_regexp = Search(r'(\(.*\))', joined_line) - if parameter_regexp: # Ignore bad syntax - function += parameter_regexp.group(1) - else: - function += '()' - function_state.Begin(function) - break - if not body_found: - # No body for the function (or evidence of a non-function) was found. - error(filename, linenum, 'readability/fn_size', 5, - 'Lint failed to find start of function body.') - elif Match(r'^\}\s*$', line): # function end - function_state.Check(error, filename, linenum) - function_state.End() - elif not Match(r'^\s*$', line): - function_state.Count() # Count non-blank/non-comment lines. - - -_RE_PATTERN_TODO = re.compile(r'^//(\s*)TODO(\(.+?\))?:?(\s|$)?') - - -def CheckComment(comment, filename, linenum, error): - """Checks for common mistakes in TODO comments. - - Args: - comment: The text of the comment from the line in question. - filename: The name of the current file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - match = _RE_PATTERN_TODO.match(comment) - if match: - # One whitespace is correct; zero whitespace is handled elsewhere. - leading_whitespace = match.group(1) - if len(leading_whitespace) > 1: - error(filename, linenum, 'whitespace/todo', 2, - 'Too many spaces before TODO') - - username = match.group(2) - if not username: - error(filename, linenum, 'readability/todo', 2, - 'Missing username in TODO; it should look like ' - '"// TODO(my_username): Stuff."') - - middle_whitespace = match.group(3) - # Comparisons made explicit for correctness -- pylint: disable-msg=C6403 - if middle_whitespace != ' ' and middle_whitespace != '': - error(filename, linenum, 'whitespace/todo', 2, - 'TODO(my_username) should be followed by a space') - -def CheckAccess(filename, clean_lines, linenum, nesting_state, error): - """Checks for improper use of DISALLOW* macros. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - nesting_state: A _NestingState instance which maintains information about - the current stack of nested blocks being parsed. - error: The function to call with any errors found. - """ - line = clean_lines.elided[linenum] # get rid of comments and strings - - matched = Match((r'\s*(DISALLOW_COPY_AND_ASSIGN|' - r'DISALLOW_EVIL_CONSTRUCTORS|' - r'DISALLOW_IMPLICIT_CONSTRUCTORS)'), line) - if not matched: - return - if nesting_state.stack and isinstance(nesting_state.stack[-1], _ClassInfo): - if nesting_state.stack[-1].access != 'private': - error(filename, linenum, 'readability/constructors', 3, - '%s must be in the private: section' % matched.group(1)) - - else: - # Found DISALLOW* macro outside a class declaration, or perhaps it - # was used inside a function when it should have been part of the - # class declaration. We could issue a warning here, but it - # probably resulted in a compiler error already. - pass - - -def FindNextMatchingAngleBracket(clean_lines, linenum, init_suffix): - """Find the corresponding > to close a template. - - Args: - clean_lines: A CleansedLines instance containing the file. - linenum: Current line number. - init_suffix: Remainder of the current line after the initial <. - - Returns: - True if a matching bracket exists. - """ - line = init_suffix - nesting_stack = ['<'] - while True: - # Find the next operator that can tell us whether < is used as an - # opening bracket or as a less-than operator. We only want to - # warn on the latter case. - # - # We could also check all other operators and terminate the search - # early, e.g. if we got something like this "a<b+c", the "<" is - # most likely a less-than operator, but then we will get false - # positives for default arguments (e.g. http://go/prccd) and - # other template expressions (e.g. http://go/oxcjq). - match = Search(r'^[^<>(),;\[\]]*([<>(),;\[\]])(.*)$', line) - if match: - # Found an operator, update nesting stack - operator = match.group(1) - line = match.group(2) - - if nesting_stack[-1] == '<': - # Expecting closing angle bracket - if operator in ('<', '(', '['): - nesting_stack.append(operator) - elif operator == '>': - nesting_stack.pop() - if not nesting_stack: - # Found matching angle bracket - return True - elif operator == ',': - # Got a comma after a bracket, this is most likely a template - # argument. We have not seen a closing angle bracket yet, but - # it's probably a few lines later if we look for it, so just - # return early here. - return True - else: - # Got some other operator. - return False - - else: - # Expecting closing parenthesis or closing bracket - if operator in ('<', '(', '['): - nesting_stack.append(operator) - elif operator in (')', ']'): - # We don't bother checking for matching () or []. If we got - # something like (] or [), it would have been a syntax error. - nesting_stack.pop() - - else: - # Scan the next line - linenum += 1 - if linenum >= len(clean_lines.elided): - break - line = clean_lines.elided[linenum] - - # Exhausted all remaining lines and still no matching angle bracket. - # Most likely the input was incomplete, otherwise we should have - # seen a semicolon and returned early. - return True - - -def FindPreviousMatchingAngleBracket(clean_lines, linenum, init_prefix): - """Find the corresponding < that started a template. - - Args: - clean_lines: A CleansedLines instance containing the file. - linenum: Current line number. - init_prefix: Part of the current line before the initial >. - - Returns: - True if a matching bracket exists. - """ - line = init_prefix - nesting_stack = ['>'] - while True: - # Find the previous operator - match = Search(r'^(.*)([<>(),;\[\]])[^<>(),;\[\]]*$', line) - if match: - # Found an operator, update nesting stack - operator = match.group(2) - line = match.group(1) - - if nesting_stack[-1] == '>': - # Expecting opening angle bracket - if operator in ('>', ')', ']'): - nesting_stack.append(operator) - elif operator == '<': - nesting_stack.pop() - if not nesting_stack: - # Found matching angle bracket - return True - elif operator == ',': - # Got a comma before a bracket, this is most likely a - # template argument. The opening angle bracket is probably - # there if we look for it, so just return early here. - return True - else: - # Got some other operator. - return False - - else: - # Expecting opening parenthesis or opening bracket - if operator in ('>', ')', ']'): - nesting_stack.append(operator) - elif operator in ('(', '['): - nesting_stack.pop() - - else: - # Scan the previous line - linenum -= 1 - if linenum < 0: - break - line = clean_lines.elided[linenum] - - # Exhausted all earlier lines and still no matching angle bracket. - return False - - -def CheckSpacing(filename, clean_lines, linenum, nesting_state, error): - """Checks for the correctness of various spacing issues in the code. - - Things we check for: spaces around operators, spaces after - if/for/while/switch, no spaces around parens in function calls, two - spaces between code and comment, don't start a block with a blank - line, don't end a function with a blank line, don't add a blank line - after public/protected/private, don't have too many blank lines in a row. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - nesting_state: A _NestingState instance which maintains information about - the current stack of nested blocks being parsed. - error: The function to call with any errors found. - """ - - raw = clean_lines.raw_lines - line = raw[linenum] - - # Before nixing comments, check if the line is blank for no good - # reason. This includes the first line after a block is opened, and - # blank lines at the end of a function (ie, right before a line like '}' - # - # Skip all the blank line checks if we are immediately inside a - # namespace body. In other words, don't issue blank line warnings - # for this block: - # namespace { - # - # } - # - # A warning about missing end of namespace comments will be issued instead. - if IsBlankLine(line) and not nesting_state.InNamespaceBody(): - elided = clean_lines.elided - prev_line = elided[linenum - 1] - prevbrace = prev_line.rfind('{') - # TODO(unknown): Don't complain if line before blank line, and line after, - # both start with alnums and are indented the same amount. - # This ignores whitespace at the start of a namespace block - # because those are not usually indented. - if prevbrace != -1 and prev_line[prevbrace:].find('}') == -1: - # OK, we have a blank line at the start of a code block. Before we - # complain, we check if it is an exception to the rule: The previous - # non-empty line has the parameters of a function header that are indented - # 4 spaces (because they did not fit in a 80 column line when placed on - # the same line as the function name). We also check for the case where - # the previous line is indented 6 spaces, which may happen when the - # initializers of a constructor do not fit into a 80 column line. - exception = False - if Match(r' {6}\w', prev_line): # Initializer list? - # We are looking for the opening column of initializer list, which - # should be indented 4 spaces to cause 6 space indentation afterwards. - search_position = linenum-2 - while (search_position >= 0 - and Match(r' {6}\w', elided[search_position])): - search_position -= 1 - exception = (search_position >= 0 - and elided[search_position][:5] == ' :') - else: - # Search for the function arguments or an initializer list. We use a - # simple heuristic here: If the line is indented 4 spaces; and we have a - # closing paren, without the opening paren, followed by an opening brace - # or colon (for initializer lists) we assume that it is the last line of - # a function header. If we have a colon indented 4 spaces, it is an - # initializer list. - exception = (Match(r' {4}\w[^\(]*\)\s*(const\s*)?(\{\s*$|:)', - prev_line) - or Match(r' {4}:', prev_line)) - - if not exception: - error(filename, linenum, 'whitespace/blank_line', 2, - 'Blank line at the start of a code block. Is this needed?') - # Ignore blank lines at the end of a block in a long if-else - # chain, like this: - # if (condition1) { - # // Something followed by a blank line - # - # } else if (condition2) { - # // Something else - # } - if linenum + 1 < clean_lines.NumLines(): - next_line = raw[linenum + 1] - if (next_line - and Match(r'\s*}', next_line) - and next_line.find('} else ') == -1): - error(filename, linenum, 'whitespace/blank_line', 3, - 'Blank line at the end of a code block. Is this needed?') - - matched = Match(r'\s*(public|protected|private):', prev_line) - if matched: - error(filename, linenum, 'whitespace/blank_line', 3, - 'Do not leave a blank line after "%s:"' % matched.group(1)) - - # Next, we complain if there's a comment too near the text - commentpos = line.find('//') - if commentpos != -1: - # Check if the // may be in quotes. If so, ignore it - # Comparisons made explicit for clarity -- pylint: disable-msg=C6403 - if (line.count('"', 0, commentpos) - - line.count('\\"', 0, commentpos)) % 2 == 0: # not in quotes - # Allow one space for new scopes, two spaces otherwise: - if (not Match(r'^\s*{ //', line) and - ((commentpos >= 1 and - line[commentpos-1] not in string.whitespace) or - (commentpos >= 2 and - line[commentpos-2] not in string.whitespace))): - error(filename, linenum, 'whitespace/comments', 2, - 'At least two spaces is best between code and comments') - # There should always be a space between the // and the comment - commentend = commentpos + 2 - if commentend < len(line) and not line[commentend] == ' ': - # but some lines are exceptions -- e.g. if they're big - # comment delimiters like: - # //---------------------------------------------------------- - # or are an empty C++ style Doxygen comment, like: - # /// - # or they begin with multiple slashes followed by a space: - # //////// Header comment - match = (Search(r'[=/-]{4,}\s*$', line[commentend:]) or - Search(r'^/$', line[commentend:]) or - Search(r'^/+ ', line[commentend:])) - if not match: - error(filename, linenum, 'whitespace/comments', 4, - 'Should have a space between // and comment') - CheckComment(line[commentpos:], filename, linenum, error) - - line = clean_lines.elided[linenum] # get rid of comments and strings - - # Don't try to do spacing checks for operator methods - line = re.sub(r'operator(==|!=|<|<<|<=|>=|>>|>)\(', 'operator\(', line) - - # We allow no-spaces around = within an if: "if ( (a=Foo()) == 0 )". - # Otherwise not. Note we only check for non-spaces on *both* sides; - # sometimes people put non-spaces on one side when aligning ='s among - # many lines (not that this is behavior that I approve of...) - if Search(r'[\w.]=[\w.]', line) and not Search(r'\b(if|while) ', line): - error(filename, linenum, 'whitespace/operators', 4, - 'Missing spaces around =') - - # It's ok not to have spaces around binary operators like + - * /, but if - # there's too little whitespace, we get concerned. It's hard to tell, - # though, so we punt on this one for now. TODO. - - # You should always have whitespace around binary operators. - # - # Check <= and >= first to avoid false positives with < and >, then - # check non-include lines for spacing around < and >. - match = Search(r'[^<>=!\s](==|!=|<=|>=)[^<>=!\s]', line) - if match: - error(filename, linenum, 'whitespace/operators', 3, - 'Missing spaces around %s' % match.group(1)) - # We allow no-spaces around << when used like this: 10<<20, but - # not otherwise (particularly, not when used as streams) - match = Search(r'(\S)(?:L|UL|ULL|l|ul|ull)?<<(\S)', line) - if match and not (match.group(1).isdigit() and match.group(2).isdigit()): - error(filename, linenum, 'whitespace/operators', 3, - 'Missing spaces around <<') - elif not Match(r'#.*include', line): - # Avoid false positives on -> - reduced_line = line.replace('->', '') - - # Look for < that is not surrounded by spaces. This is only - # triggered if both sides are missing spaces, even though - # technically should should flag if at least one side is missing a - # space. This is done to avoid some false positives with shifts. - match = Search(r'[^\s<]<([^\s=<].*)', reduced_line) - if (match and - not FindNextMatchingAngleBracket(clean_lines, linenum, match.group(1))): - error(filename, linenum, 'whitespace/operators', 3, - 'Missing spaces around <') - - # Look for > that is not surrounded by spaces. Similar to the - # above, we only trigger if both sides are missing spaces to avoid - # false positives with shifts. - match = Search(r'^(.*[^\s>])>[^\s=>]', reduced_line) - if (match and - not FindPreviousMatchingAngleBracket(clean_lines, linenum, - match.group(1))): - error(filename, linenum, 'whitespace/operators', 3, - 'Missing spaces around >') - - # We allow no-spaces around >> for almost anything. This is because - # C++11 allows ">>" to close nested templates, which accounts for - # most cases when ">>" is not followed by a space. - # - # We still warn on ">>" followed by alpha character, because that is - # likely due to ">>" being used for right shifts, e.g.: - # value >> alpha - # - # When ">>" is used to close templates, the alphanumeric letter that - # follows would be part of an identifier, and there should still be - # a space separating the template type and the identifier. - # type<type<type>> alpha - match = Search(r'>>[a-zA-Z_]', line) - if match: - error(filename, linenum, 'whitespace/operators', 3, - 'Missing spaces around >>') - - # There shouldn't be space around unary operators - match = Search(r'(!\s|~\s|[\s]--[\s;]|[\s]\+\+[\s;])', line) - if match: - error(filename, linenum, 'whitespace/operators', 4, - 'Extra space for operator %s' % match.group(1)) - - # A pet peeve of mine: no spaces after an if, while, switch, or for - match = Search(r' (if\(|for\(|while\(|switch\()', line) - if match: - error(filename, linenum, 'whitespace/parens', 5, - 'Missing space before ( in %s' % match.group(1)) - - # For if/for/while/switch, the left and right parens should be - # consistent about how many spaces are inside the parens, and - # there should either be zero or one spaces inside the parens. - # We don't want: "if ( foo)" or "if ( foo )". - # Exception: "for ( ; foo; bar)" and "for (foo; bar; )" are allowed. - match = Search(r'\b(if|for|while|switch)\s*' - r'\(([ ]*)(.).*[^ ]+([ ]*)\)\s*{\s*$', - line) - if match: - if len(match.group(2)) != len(match.group(4)): - if not (match.group(3) == ';' and - len(match.group(2)) == 1 + len(match.group(4)) or - not match.group(2) and Search(r'\bfor\s*\(.*; \)', line)): - error(filename, linenum, 'whitespace/parens', 5, - 'Mismatching spaces inside () in %s' % match.group(1)) - if not len(match.group(2)) in [0, 1]: - error(filename, linenum, 'whitespace/parens', 5, - 'Should have zero or one spaces inside ( and ) in %s' % - match.group(1)) - - # You should always have a space after a comma (either as fn arg or operator) - if Search(r',[^\s]', line): - error(filename, linenum, 'whitespace/comma', 3, - 'Missing space after ,') - - # You should always have a space after a semicolon - # except for few corner cases - # TODO(unknown): clarify if 'if (1) { return 1;}' is requires one more - # space after ; - if Search(r';[^\s};\\)/]', line): - error(filename, linenum, 'whitespace/semicolon', 3, - 'Missing space after ;') - - # Next we will look for issues with function calls. - CheckSpacingForFunctionCall(filename, line, linenum, error) - - # Except after an opening paren, or after another opening brace (in case of - # an initializer list, for instance), you should have spaces before your - # braces. And since you should never have braces at the beginning of a line, - # this is an easy test. - if Search(r'[^ ({]{', line): - error(filename, linenum, 'whitespace/braces', 5, - 'Missing space before {') - - # Make sure '} else {' has spaces. - if Search(r'}else', line): - error(filename, linenum, 'whitespace/braces', 5, - 'Missing space before else') - - # You shouldn't have spaces before your brackets, except maybe after - # 'delete []' or 'new char * []'. - if Search(r'\w\s+\[', line) and not Search(r'delete\s+\[', line): - error(filename, linenum, 'whitespace/braces', 5, - 'Extra space before [') - - # You shouldn't have a space before a semicolon at the end of the line. - # There's a special case for "for" since the style guide allows space before - # the semicolon there. - if Search(r':\s*;\s*$', line): - error(filename, linenum, 'whitespace/semicolon', 5, - 'Semicolon defining empty statement. Use {} instead.') - elif Search(r'^\s*;\s*$', line): - error(filename, linenum, 'whitespace/semicolon', 5, - 'Line contains only semicolon. If this should be an empty statement, ' - 'use {} instead.') - elif (Search(r'\s+;\s*$', line) and - not Search(r'\bfor\b', line)): - error(filename, linenum, 'whitespace/semicolon', 5, - 'Extra space before last semicolon. If this should be an empty ' - 'statement, use {} instead.') - - # In range-based for, we wanted spaces before and after the colon, but - # not around "::" tokens that might appear. - if (Search('for *\(.*[^:]:[^: ]', line) or - Search('for *\(.*[^: ]:[^:]', line)): - error(filename, linenum, 'whitespace/forcolon', 2, - 'Missing space around colon in range-based for loop') - - -def CheckSectionSpacing(filename, clean_lines, class_info, linenum, error): - """Checks for additional blank line issues related to sections. - - Currently the only thing checked here is blank line before protected/private. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - class_info: A _ClassInfo objects. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - # Skip checks if the class is small, where small means 25 lines or less. - # 25 lines seems like a good cutoff since that's the usual height of - # terminals, and any class that can't fit in one screen can't really - # be considered "small". - # - # Also skip checks if we are on the first line. This accounts for - # classes that look like - # class Foo { public: ... }; - # - # If we didn't find the end of the class, last_line would be zero, - # and the check will be skipped by the first condition. - if (class_info.last_line - class_info.starting_linenum <= 24 or - linenum <= class_info.starting_linenum): - return - - matched = Match(r'\s*(public|protected|private):', clean_lines.lines[linenum]) - if matched: - # Issue warning if the line before public/protected/private was - # not a blank line, but don't do this if the previous line contains - # "class" or "struct". This can happen two ways: - # - We are at the beginning of the class. - # - We are forward-declaring an inner class that is semantically - # private, but needed to be public for implementation reasons. - # Also ignores cases where the previous line ends with a backslash as can be - # common when defining classes in C macros. - prev_line = clean_lines.lines[linenum - 1] - if (not IsBlankLine(prev_line) and - not Search(r'\b(class|struct)\b', prev_line) and - not Search(r'\\$', prev_line)): - # Try a bit harder to find the beginning of the class. This is to - # account for multi-line base-specifier lists, e.g.: - # class Derived - # : public Base { - end_class_head = class_info.starting_linenum - for i in range(class_info.starting_linenum, linenum): - if Search(r'\{\s*$', clean_lines.lines[i]): - end_class_head = i - break - if end_class_head < linenum - 1: - error(filename, linenum, 'whitespace/blank_line', 3, - '"%s:" should be preceded by a blank line' % matched.group(1)) - - -def GetPreviousNonBlankLine(clean_lines, linenum): - """Return the most recent non-blank line and its line number. - - Args: - clean_lines: A CleansedLines instance containing the file contents. - linenum: The number of the line to check. - - Returns: - A tuple with two elements. The first element is the contents of the last - non-blank line before the current line, or the empty string if this is the - first non-blank line. The second is the line number of that line, or -1 - if this is the first non-blank line. - """ - - prevlinenum = linenum - 1 - while prevlinenum >= 0: - prevline = clean_lines.elided[prevlinenum] - if not IsBlankLine(prevline): # if not a blank line... - return (prevline, prevlinenum) - prevlinenum -= 1 - return ('', -1) - - -def CheckBraces(filename, clean_lines, linenum, error): - """Looks for misplaced braces (e.g. at the end of line). - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - - line = clean_lines.elided[linenum] # get rid of comments and strings - - if Match(r'\s*{\s*$', line): - # We allow an open brace to start a line in the case where someone - # is using braces in a block to explicitly create a new scope, - # which is commonly used to control the lifetime of - # stack-allocated variables. We don't detect this perfectly: we - # just don't complain if the last non-whitespace character on the - # previous non-blank line is ';', ':', '{', or '}', or if the previous - # line starts a preprocessor block. - prevline = GetPreviousNonBlankLine(clean_lines, linenum)[0] - if (not Search(r'[;:}{]\s*$', prevline) and - not Match(r'\s*#', prevline)): - error(filename, linenum, 'whitespace/braces', 4, - '{ should almost always be at the end of the previous line') - - # An else clause should be on the same line as the preceding closing brace. - if Match(r'\s*else\s*', line): - prevline = GetPreviousNonBlankLine(clean_lines, linenum)[0] - if Match(r'\s*}\s*$', prevline): - error(filename, linenum, 'whitespace/newline', 4, - 'An else should appear on the same line as the preceding }') - - # If braces come on one side of an else, they should be on both. - # However, we have to worry about "else if" that spans multiple lines! - if Search(r'}\s*else[^{]*$', line) or Match(r'[^}]*else\s*{', line): - if Search(r'}\s*else if([^{]*)$', line): # could be multi-line if - # find the ( after the if - pos = line.find('else if') - pos = line.find('(', pos) - if pos > 0: - (endline, _, endpos) = CloseExpression(clean_lines, linenum, pos) - if endline[endpos:].find('{') == -1: # must be brace after if - error(filename, linenum, 'readability/braces', 5, - 'If an else has a brace on one side, it should have it on both') - else: # common case: else not followed by a multi-line if - error(filename, linenum, 'readability/braces', 5, - 'If an else has a brace on one side, it should have it on both') - - # Likewise, an else should never have the else clause on the same line - if Search(r'\belse [^\s{]', line) and not Search(r'\belse if\b', line): - error(filename, linenum, 'whitespace/newline', 4, - 'Else clause should never be on same line as else (use 2 lines)') - - # In the same way, a do/while should never be on one line - if Match(r'\s*do [^\s{]', line): - error(filename, linenum, 'whitespace/newline', 4, - 'do/while clauses should not be on a single line') - - # Braces shouldn't be followed by a ; unless they're defining a struct - # or initializing an array. - # We can't tell in general, but we can for some common cases. - prevlinenum = linenum - while True: - (prevline, prevlinenum) = GetPreviousNonBlankLine(clean_lines, prevlinenum) - if Match(r'\s+{.*}\s*;', line) and not prevline.count(';'): - line = prevline + line - else: - break - if (Search(r'{.*}\s*;', line) and - line.count('{') == line.count('}') and - not Search(r'struct|class|enum|\s*=\s*{', line)): - error(filename, linenum, 'readability/braces', 4, - "You don't need a ; after a }") - - -def CheckEmptyLoopBody(filename, clean_lines, linenum, error): - """Loop for empty loop body with only a single semicolon. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - - # Search for loop keywords at the beginning of the line. Because only - # whitespaces are allowed before the keywords, this will also ignore most - # do-while-loops, since those lines should start with closing brace. - line = clean_lines.elided[linenum] - if Match(r'\s*(for|while)\s*\(', line): - # Find the end of the conditional expression - (end_line, end_linenum, end_pos) = CloseExpression( - clean_lines, linenum, line.find('(')) - - # Output warning if what follows the condition expression is a semicolon. - # No warning for all other cases, including whitespace or newline, since we - # have a separate check for semicolons preceded by whitespace. - if end_pos >= 0 and Match(r';', end_line[end_pos:]): - error(filename, end_linenum, 'whitespace/empty_loop_body', 5, - 'Empty loop bodies should use {} or continue') - - -def ReplaceableCheck(operator, macro, line): - """Determine whether a basic CHECK can be replaced with a more specific one. - - For example suggest using CHECK_EQ instead of CHECK(a == b) and - similarly for CHECK_GE, CHECK_GT, CHECK_LE, CHECK_LT, CHECK_NE. - - Args: - operator: The C++ operator used in the CHECK. - macro: The CHECK or EXPECT macro being called. - line: The current source line. - - Returns: - True if the CHECK can be replaced with a more specific one. - """ - - # This matches decimal and hex integers, strings, and chars (in that order). - match_constant = r'([-+]?(\d+|0[xX][0-9a-fA-F]+)[lLuU]{0,3}|".*"|\'.*\')' - - # Expression to match two sides of the operator with something that - # looks like a literal, since CHECK(x == iterator) won't compile. - # This means we can't catch all the cases where a more specific - # CHECK is possible, but it's less annoying than dealing with - # extraneous warnings. - match_this = (r'\s*' + macro + r'\((\s*' + - match_constant + r'\s*' + operator + r'[^<>].*|' - r'.*[^<>]' + operator + r'\s*' + match_constant + - r'\s*\))') - - # Don't complain about CHECK(x == NULL) or similar because - # CHECK_EQ(x, NULL) won't compile (requires a cast). - # Also, don't complain about more complex boolean expressions - # involving && or || such as CHECK(a == b || c == d). - return Match(match_this, line) and not Search(r'NULL|&&|\|\|', line) - - -def CheckCheck(filename, clean_lines, linenum, error): - """Checks the use of CHECK and EXPECT macros. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - - # Decide the set of replacement macros that should be suggested - raw_lines = clean_lines.raw_lines - current_macro = '' - for macro in _CHECK_MACROS: - if raw_lines[linenum].find(macro) >= 0: - current_macro = macro - break - if not current_macro: - # Don't waste time here if line doesn't contain 'CHECK' or 'EXPECT' - return - - line = clean_lines.elided[linenum] # get rid of comments and strings - - # Encourage replacing plain CHECKs with CHECK_EQ/CHECK_NE/etc. - for operator in ['==', '!=', '>=', '>', '<=', '<']: - if ReplaceableCheck(operator, current_macro, line): - error(filename, linenum, 'readability/check', 2, - 'Consider using %s instead of %s(a %s b)' % ( - _CHECK_REPLACEMENT[current_macro][operator], - current_macro, operator)) - break - - -def CheckAltTokens(filename, clean_lines, linenum, error): - """Check alternative keywords being used in boolean expressions. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - line = clean_lines.elided[linenum] - - # Avoid preprocessor lines - if Match(r'^\s*#', line): - return - - # Last ditch effort to avoid multi-line comments. This will not help - # if the comment started before the current line or ended after the - # current line, but it catches most of the false positives. At least, - # it provides a way to workaround this warning for people who use - # multi-line comments in preprocessor macros. - # - # TODO(unknown): remove this once cpplint has better support for - # multi-line comments. - if line.find('/*') >= 0 or line.find('*/') >= 0: - return - - for match in _ALT_TOKEN_REPLACEMENT_PATTERN.finditer(line): - error(filename, linenum, 'readability/alt_tokens', 2, - 'Use operator %s instead of %s' % ( - _ALT_TOKEN_REPLACEMENT[match.group(1)], match.group(1))) - - -def GetLineWidth(line): - """Determines the width of the line in column positions. - - Args: - line: A string, which may be a Unicode string. - - Returns: - The width of the line in column positions, accounting for Unicode - combining characters and wide characters. - """ - if isinstance(line, unicode): - width = 0 - for uc in unicodedata.normalize('NFC', line): - if unicodedata.east_asian_width(uc) in ('W', 'F'): - width += 2 - elif not unicodedata.combining(uc): - width += 1 - return width - else: - return len(line) - - -def CheckStyle(filename, clean_lines, linenum, file_extension, nesting_state, - error): - """Checks rules from the 'C++ style rules' section of cppguide.html. - - Most of these rules are hard to test (naming, comment style), but we - do what we can. In particular we check for 2-space indents, line lengths, - tab usage, spaces inside code, etc. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - file_extension: The extension (without the dot) of the filename. - nesting_state: A _NestingState instance which maintains information about - the current stack of nested blocks being parsed. - error: The function to call with any errors found. - """ - - raw_lines = clean_lines.raw_lines - line = raw_lines[linenum] - - if line.find('\t') != -1: - error(filename, linenum, 'whitespace/tab', 1, - 'Tab found; better to use spaces') - - # One or three blank spaces at the beginning of the line is weird; it's - # hard to reconcile that with 2-space indents. - # NOTE: here are the conditions rob pike used for his tests. Mine aren't - # as sophisticated, but it may be worth becoming so: RLENGTH==initial_spaces - # if(RLENGTH > 20) complain = 0; - # if(match($0, " +(error|private|public|protected):")) complain = 0; - # if(match(prev, "&& *$")) complain = 0; - # if(match(prev, "\\|\\| *$")) complain = 0; - # if(match(prev, "[\",=><] *$")) complain = 0; - # if(match($0, " <<")) complain = 0; - # if(match(prev, " +for \\(")) complain = 0; - # if(prevodd && match(prevprev, " +for \\(")) complain = 0; - initial_spaces = 0 - cleansed_line = clean_lines.elided[linenum] - while initial_spaces < len(line) and line[initial_spaces] == ' ': - initial_spaces += 1 - if line and line[-1].isspace(): - error(filename, linenum, 'whitespace/end_of_line', 4, - 'Line ends in whitespace. Consider deleting these extra spaces.') - # There are certain situations we allow one space, notably for labels - elif ((initial_spaces == 1 or initial_spaces == 3) and - not Match(r'\s*\w+\s*:\s*$', cleansed_line)): - error(filename, linenum, 'whitespace/indent', 3, - 'Weird number of spaces at line-start. ' - 'Are you using a 2-space indent?') - # Labels should always be indented at least one space. - elif not initial_spaces and line[:2] != '//' and Search(r'[^:]:\s*$', - line): - error(filename, linenum, 'whitespace/labels', 4, - 'Labels should always be indented at least one space. ' - 'If this is a member-initializer list in a constructor or ' - 'the base class list in a class definition, the colon should ' - 'be on the following line.') - - - # Check if the line is a header guard. - is_header_guard = False - if file_extension == 'h': - cppvar = GetHeaderGuardCPPVariable(filename) - if (line.startswith('#ifndef %s' % cppvar) or - line.startswith('#define %s' % cppvar) or - line.startswith('#endif // %s' % cppvar)): - is_header_guard = True - # #include lines and header guards can be long, since there's no clean way to - # split them. - # - # URLs can be long too. It's possible to split these, but it makes them - # harder to cut&paste. - # - # The "$Id:...$" comment may also get very long without it being the - # developers fault. - if (not line.startswith('#include') and not is_header_guard and - not Match(r'^\s*//.*http(s?)://\S*$', line) and - not Match(r'^// \$Id:.*#[0-9]+ \$$', line)): - line_width = GetLineWidth(line) - if line_width > 100: - error(filename, linenum, 'whitespace/line_length', 4, - 'Lines should very rarely be longer than 100 characters') - elif line_width > 80: - error(filename, linenum, 'whitespace/line_length', 2, - 'Lines should be <= 80 characters long') - - if (cleansed_line.count(';') > 1 and - # for loops are allowed two ;'s (and may run over two lines). - cleansed_line.find('for') == -1 and - (GetPreviousNonBlankLine(clean_lines, linenum)[0].find('for') == -1 or - GetPreviousNonBlankLine(clean_lines, linenum)[0].find(';') != -1) and - # It's ok to have many commands in a switch case that fits in 1 line - not ((cleansed_line.find('case ') != -1 or - cleansed_line.find('default:') != -1) and - cleansed_line.find('break;') != -1)): - error(filename, linenum, 'whitespace/newline', 0, - 'More than one command on the same line') - - # Some more style checks - CheckBraces(filename, clean_lines, linenum, error) - CheckEmptyLoopBody(filename, clean_lines, linenum, error) - CheckAccess(filename, clean_lines, linenum, nesting_state, error) - CheckSpacing(filename, clean_lines, linenum, nesting_state, error) - CheckCheck(filename, clean_lines, linenum, error) - CheckAltTokens(filename, clean_lines, linenum, error) - classinfo = nesting_state.InnermostClass() - if classinfo: - CheckSectionSpacing(filename, clean_lines, classinfo, linenum, error) - - -_RE_PATTERN_INCLUDE_NEW_STYLE = re.compile(r'#include +"[^/]+\.h"') -_RE_PATTERN_INCLUDE = re.compile(r'^\s*#\s*include\s*([<"])([^>"]*)[>"].*$') -# Matches the first component of a filename delimited by -s and _s. That is: -# _RE_FIRST_COMPONENT.match('foo').group(0) == 'foo' -# _RE_FIRST_COMPONENT.match('foo.cc').group(0) == 'foo' -# _RE_FIRST_COMPONENT.match('foo-bar_baz.cc').group(0) == 'foo' -# _RE_FIRST_COMPONENT.match('foo_bar-baz.cc').group(0) == 'foo' -_RE_FIRST_COMPONENT = re.compile(r'^[^-_.]+') - - -def _DropCommonSuffixes(filename): - """Drops common suffixes like _test.cc or -inl.h from filename. - - For example: - >>> _DropCommonSuffixes('foo/foo-inl.h') - 'foo/foo' - >>> _DropCommonSuffixes('foo/bar/foo.cc') - 'foo/bar/foo' - >>> _DropCommonSuffixes('foo/foo_internal.h') - 'foo/foo' - >>> _DropCommonSuffixes('foo/foo_unusualinternal.h') - 'foo/foo_unusualinternal' - - Args: - filename: The input filename. - - Returns: - The filename with the common suffix removed. - """ - for suffix in ('test.cc', 'regtest.cc', 'unittest.cc', - 'inl.h', 'impl.h', 'internal.h'): - if (filename.endswith(suffix) and len(filename) > len(suffix) and - filename[-len(suffix) - 1] in ('-', '_')): - return filename[:-len(suffix) - 1] - return os.path.splitext(filename)[0] - - -def _IsTestFilename(filename): - """Determines if the given filename has a suffix that identifies it as a test. - - Args: - filename: The input filename. - - Returns: - True if 'filename' looks like a test, False otherwise. - """ - if (filename.endswith('_test.cc') or - filename.endswith('_unittest.cc') or - filename.endswith('_regtest.cc')): - return True - else: - return False - - -def _ClassifyInclude(fileinfo, include, is_system): - """Figures out what kind of header 'include' is. - - Args: - fileinfo: The current file cpplint is running over. A FileInfo instance. - include: The path to a #included file. - is_system: True if the #include used <> rather than "". - - Returns: - One of the _XXX_HEADER constants. - - For example: - >>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'stdio.h', True) - _C_SYS_HEADER - >>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'string', True) - _CPP_SYS_HEADER - >>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'foo/foo.h', False) - _LIKELY_MY_HEADER - >>> _ClassifyInclude(FileInfo('foo/foo_unknown_extension.cc'), - ... 'bar/foo_other_ext.h', False) - _POSSIBLE_MY_HEADER - >>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'foo/bar.h', False) - _OTHER_HEADER - """ - # This is a list of all standard c++ header files, except - # those already checked for above. - is_stl_h = include in _STL_HEADERS - is_cpp_h = is_stl_h or include in _CPP_HEADERS - - if is_system: - if is_cpp_h: - return _CPP_SYS_HEADER - else: - return _C_SYS_HEADER - - # If the target file and the include we're checking share a - # basename when we drop common extensions, and the include - # lives in . , then it's likely to be owned by the target file. - target_dir, target_base = ( - os.path.split(_DropCommonSuffixes(fileinfo.RepositoryName()))) - include_dir, include_base = os.path.split(_DropCommonSuffixes(include)) - if target_base == include_base and ( - include_dir == target_dir or - include_dir == os.path.normpath(target_dir + '/../public')): - return _LIKELY_MY_HEADER - - # If the target and include share some initial basename - # component, it's possible the target is implementing the - # include, so it's allowed to be first, but we'll never - # complain if it's not there. - target_first_component = _RE_FIRST_COMPONENT.match(target_base) - include_first_component = _RE_FIRST_COMPONENT.match(include_base) - if (target_first_component and include_first_component and - target_first_component.group(0) == - include_first_component.group(0)): - return _POSSIBLE_MY_HEADER - - return _OTHER_HEADER - - - -def CheckIncludeLine(filename, clean_lines, linenum, include_state, error): - """Check rules that are applicable to #include lines. - - Strings on #include lines are NOT removed from elided line, to make - certain tasks easier. However, to prevent false positives, checks - applicable to #include lines in CheckLanguage must be put here. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - include_state: An _IncludeState instance in which the headers are inserted. - error: The function to call with any errors found. - """ - fileinfo = FileInfo(filename) - - line = clean_lines.lines[linenum] - - # "include" should use the new style "foo/bar.h" instead of just "bar.h" - if _RE_PATTERN_INCLUDE_NEW_STYLE.search(line): - error(filename, linenum, 'build/include', 4, - 'Include the directory when naming .h files') - - # we shouldn't include a file more than once. actually, there are a - # handful of instances where doing so is okay, but in general it's - # not. - match = _RE_PATTERN_INCLUDE.search(line) - if match: - include = match.group(2) - is_system = (match.group(1) == '<') - if include in include_state: - error(filename, linenum, 'build/include', 4, - '"%s" already included at %s:%s' % - (include, filename, include_state[include])) - else: - include_state[include] = linenum - - # We want to ensure that headers appear in the right order: - # 1) for foo.cc, foo.h (preferred location) - # 2) c system files - # 3) cpp system files - # 4) for foo.cc, foo.h (deprecated location) - # 5) other google headers - # - # We classify each include statement as one of those 5 types - # using a number of techniques. The include_state object keeps - # track of the highest type seen, and complains if we see a - # lower type after that. - error_message = include_state.CheckNextIncludeOrder( - _ClassifyInclude(fileinfo, include, is_system)) - if error_message: - error(filename, linenum, 'build/include_order', 4, - '%s. Should be: %s.h, c system, c++ system, other.' % - (error_message, fileinfo.BaseName())) - if not include_state.IsInAlphabeticalOrder(include): - error(filename, linenum, 'build/include_alpha', 4, - 'Include "%s" not in alphabetical order' % include) - - # Look for any of the stream classes that are part of standard C++. - match = _RE_PATTERN_INCLUDE.match(line) - if match: - include = match.group(2) - if Match(r'(f|ind|io|i|o|parse|pf|stdio|str|)?stream$', include): - # Many unit tests use cout, so we exempt them. - if not _IsTestFilename(filename): - error(filename, linenum, 'readability/streams', 3, - 'Streams are highly discouraged.') - - -def _GetTextInside(text, start_pattern): - """Retrieves all the text between matching open and close parentheses. - - Given a string of lines and a regular expression string, retrieve all the text - following the expression and between opening punctuation symbols like - (, [, or {, and the matching close-punctuation symbol. This properly nested - occurrences of the punctuations, so for the text like - printf(a(), b(c())); - a call to _GetTextInside(text, r'printf\(') will return 'a(), b(c())'. - start_pattern must match string having an open punctuation symbol at the end. - - Args: - text: The lines to extract text. Its comments and strings must be elided. - It can be single line and can span multiple lines. - start_pattern: The regexp string indicating where to start extracting - the text. - Returns: - The extracted text. - None if either the opening string or ending punctuation could not be found. - """ - # TODO(sugawarayu): Audit cpplint.py to see what places could be profitably - # rewritten to use _GetTextInside (and use inferior regexp matching today). - - # Give opening punctuations to get the matching close-punctuations. - matching_punctuation = {'(': ')', '{': '}', '[': ']'} - closing_punctuation = set(matching_punctuation.itervalues()) - - # Find the position to start extracting text. - match = re.search(start_pattern, text, re.M) - if not match: # start_pattern not found in text. - return None - start_position = match.end(0) - - assert start_position > 0, ( - 'start_pattern must ends with an opening punctuation.') - assert text[start_position - 1] in matching_punctuation, ( - 'start_pattern must ends with an opening punctuation.') - # Stack of closing punctuations we expect to have in text after position. - punctuation_stack = [matching_punctuation[text[start_position - 1]]] - position = start_position - while punctuation_stack and position < len(text): - if text[position] == punctuation_stack[-1]: - punctuation_stack.pop() - elif text[position] in closing_punctuation: - # A closing punctuation without matching opening punctuations. - return None - elif text[position] in matching_punctuation: - punctuation_stack.append(matching_punctuation[text[position]]) - position += 1 - if punctuation_stack: - # Opening punctuations left without matching close-punctuations. - return None - # punctuations match. - return text[start_position:position - 1] - - -def CheckLanguage(filename, clean_lines, linenum, file_extension, include_state, - error): - """Checks rules from the 'C++ language rules' section of cppguide.html. - - Some of these rules are hard to test (function overloading, using - uint32 inappropriately), but we do the best we can. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - file_extension: The extension (without the dot) of the filename. - include_state: An _IncludeState instance in which the headers are inserted. - error: The function to call with any errors found. - """ - # If the line is empty or consists of entirely a comment, no need to - # check it. - line = clean_lines.elided[linenum] - if not line: - return - - match = _RE_PATTERN_INCLUDE.search(line) - if match: - CheckIncludeLine(filename, clean_lines, linenum, include_state, error) - return - - # Create an extended_line, which is the concatenation of the current and - # next lines, for more effective checking of code that may span more than one - # line. - if linenum + 1 < clean_lines.NumLines(): - extended_line = line + clean_lines.elided[linenum + 1] - else: - extended_line = line - - # Make Windows paths like Unix. - fullname = os.path.abspath(filename).replace('\\', '/') - - # TODO(unknown): figure out if they're using default arguments in fn proto. - - # Check for non-const references in functions. This is tricky because & - # is also used to take the address of something. We allow <> for templates, - # (ignoring whatever is between the braces) and : for classes. - # These are complicated re's. They try to capture the following: - # paren (for fn-prototype start), typename, &, varname. For the const - # version, we're willing for const to be before typename or after - # Don't check the implementation on same line. - fnline = line.split('{', 1)[0] - if (len(re.findall(r'\([^()]*\b(?:[\w:]|<[^()]*>)+(\s?&|&\s?)\w+', fnline)) > - len(re.findall(r'\([^()]*\bconst\s+(?:typename\s+)?(?:struct\s+)?' - r'(?:[\w:]|<[^()]*>)+(\s?&|&\s?)\w+', fnline)) + - len(re.findall(r'\([^()]*\b(?:[\w:]|<[^()]*>)+\s+const(\s?&|&\s?)[\w]+', - fnline))): - - # We allow non-const references in a few standard places, like functions - # called "swap()" or iostream operators like "<<" or ">>". We also filter - # out for loops, which lint otherwise mistakenly thinks are functions. - if not Search( - r'(for|swap|Swap|operator[<>][<>])\s*\(\s*' - r'(?:(?:typename\s*)?[\w:]|<.*>)+\s*&', - fnline): - error(filename, linenum, 'runtime/references', 2, - 'Is this a non-const reference? ' - 'If so, make const or use a pointer.') - - # Check to see if they're using an conversion function cast. - # I just try to capture the most common basic types, though there are more. - # Parameterless conversion functions, such as bool(), are allowed as they are - # probably a member operator declaration or default constructor. - match = Search( - r'(\bnew\s+)?\b' # Grab 'new' operator, if it's there - r'(int|float|double|bool|char|int32|uint32|int64|uint64)\([^)]', line) - if match: - # gMock methods are defined using some variant of MOCK_METHODx(name, type) - # where type may be float(), int(string), etc. Without context they are - # virtually indistinguishable from int(x) casts. Likewise, gMock's - # MockCallback takes a template parameter of the form return_type(arg_type), - # which looks much like the cast we're trying to detect. - if (match.group(1) is None and # If new operator, then this isn't a cast - not (Match(r'^\s*MOCK_(CONST_)?METHOD\d+(_T)?\(', line) or - Match(r'^\s*MockCallback<.*>', line))): - # Try a bit harder to catch gmock lines: the only place where - # something looks like an old-style cast is where we declare the - # return type of the mocked method, and the only time when we - # are missing context is if MOCK_METHOD was split across - # multiple lines (for example http://go/hrfhr ), so we only need - # to check the previous line for MOCK_METHOD. - if (linenum == 0 or - not Match(r'^\s*MOCK_(CONST_)?METHOD\d+(_T)?\(\S+,\s*$', - clean_lines.elided[linenum - 1])): - error(filename, linenum, 'readability/casting', 4, - 'Using deprecated casting style. ' - 'Use static_cast<%s>(...) instead' % - match.group(2)) - - CheckCStyleCast(filename, linenum, line, clean_lines.raw_lines[linenum], - 'static_cast', - r'\((int|float|double|bool|char|u?int(16|32|64))\)', error) - - # This doesn't catch all cases. Consider (const char * const)"hello". - # - # (char *) "foo" should always be a const_cast (reinterpret_cast won't - # compile). - if CheckCStyleCast(filename, linenum, line, clean_lines.raw_lines[linenum], - 'const_cast', r'\((char\s?\*+\s?)\)\s*"', error): - pass - else: - # Check pointer casts for other than string constants - CheckCStyleCast(filename, linenum, line, clean_lines.raw_lines[linenum], - 'reinterpret_cast', r'\((\w+\s?\*+\s?)\)', error) - - # In addition, we look for people taking the address of a cast. This - # is dangerous -- casts can assign to temporaries, so the pointer doesn't - # point where you think. - if Search( - r'(&\([^)]+\)[\w(])|(&(static|dynamic|reinterpret)_cast\b)', line): - error(filename, linenum, 'runtime/casting', 4, - ('Are you taking an address of a cast? ' - 'This is dangerous: could be a temp var. ' - 'Take the address before doing the cast, rather than after')) - - # Check for people declaring static/global STL strings at the top level. - # This is dangerous because the C++ language does not guarantee that - # globals with constructors are initialized before the first access. - match = Match( - r'((?:|static +)(?:|const +))string +([a-zA-Z0-9_:]+)\b(.*)', - line) - # Make sure it's not a function. - # Function template specialization looks like: "string foo<Type>(...". - # Class template definitions look like: "string Foo<Type>::Method(...". - if match and not Match(r'\s*(<.*>)?(::[a-zA-Z0-9_]+)?\s*\(([^"]|$)', - match.group(3)): - error(filename, linenum, 'runtime/string', 4, - 'For a static/global string constant, use a C style string instead: ' - '"%schar %s[]".' % - (match.group(1), match.group(2))) - - # Check that we're not using RTTI outside of testing code. - if Search(r'\bdynamic_cast<', line) and not _IsTestFilename(filename): - error(filename, linenum, 'runtime/rtti', 5, - 'Do not use dynamic_cast<>. If you need to cast within a class ' - "hierarchy, use static_cast<> to upcast. Google doesn't support " - 'RTTI.') - - if Search(r'\b([A-Za-z0-9_]*_)\(\1\)', line): - error(filename, linenum, 'runtime/init', 4, - 'You seem to be initializing a member variable with itself.') - - if file_extension == 'h': - # TODO(unknown): check that 1-arg constructors are explicit. - # How to tell it's a constructor? - # (handled in CheckForNonStandardConstructs for now) - # TODO(unknown): check that classes have DISALLOW_EVIL_CONSTRUCTORS - # (level 1 error) - pass - - # Check if people are using the verboten C basic types. The only exception - # we regularly allow is "unsigned short port" for port. - if Search(r'\bshort port\b', line): - if not Search(r'\bunsigned short port\b', line): - error(filename, linenum, 'runtime/int', 4, - 'Use "unsigned short" for ports, not "short"') - else: - match = Search(r'\b(short|long(?! +double)|long long)\b', line) - if match: - error(filename, linenum, 'runtime/int', 4, - 'Use int16/int64/etc, rather than the C type %s' % match.group(1)) - - # When snprintf is used, the second argument shouldn't be a literal. - match = Search(r'snprintf\s*\(([^,]*),\s*([0-9]*)\s*,', line) - if match and match.group(2) != '0': - # If 2nd arg is zero, snprintf is used to calculate size. - error(filename, linenum, 'runtime/printf', 3, - 'If you can, use sizeof(%s) instead of %s as the 2nd arg ' - 'to snprintf.' % (match.group(1), match.group(2))) - - # Check if some verboten C functions are being used. - if Search(r'\bsprintf\b', line): - error(filename, linenum, 'runtime/printf', 5, - 'Never use sprintf. Use snprintf instead.') - match = Search(r'\b(strcpy|strcat)\b', line) - if match: - error(filename, linenum, 'runtime/printf', 4, - 'Almost always, snprintf is better than %s' % match.group(1)) - - if Search(r'\bsscanf\b', line): - error(filename, linenum, 'runtime/printf', 1, - 'sscanf can be ok, but is slow and can overflow buffers.') - - # Check if some verboten operator overloading is going on - # TODO(unknown): catch out-of-line unary operator&: - # class X {}; - # int operator&(const X& x) { return 42; } // unary operator& - # The trick is it's hard to tell apart from binary operator&: - # class Y { int operator&(const Y& x) { return 23; } }; // binary operator& - if Search(r'\boperator\s*&\s*\(\s*\)', line): - error(filename, linenum, 'runtime/operator', 4, - 'Unary operator& is dangerous. Do not use it.') - - # Check for suspicious usage of "if" like - # } if (a == b) { - if Search(r'\}\s*if\s*\(', line): - error(filename, linenum, 'readability/braces', 4, - 'Did you mean "else if"? If not, start a new line for "if".') - - # Check for potential format string bugs like printf(foo). - # We constrain the pattern not to pick things like DocidForPrintf(foo). - # Not perfect but it can catch printf(foo.c_str()) and printf(foo->c_str()) - # TODO(sugawarayu): Catch the following case. Need to change the calling - # convention of the whole function to process multiple line to handle it. - # printf( - # boy_this_is_a_really_long_variable_that_cannot_fit_on_the_prev_line); - printf_args = _GetTextInside(line, r'(?i)\b(string)?printf\s*\(') - if printf_args: - match = Match(r'([\w.\->()]+)$', printf_args) - if match and match.group(1) != '__VA_ARGS__': - function_name = re.search(r'\b((?:string)?printf)\s*\(', - line, re.I).group(1) - error(filename, linenum, 'runtime/printf', 4, - 'Potential format string bug. Do %s("%%s", %s) instead.' - % (function_name, match.group(1))) - - # Check for potential memset bugs like memset(buf, sizeof(buf), 0). - match = Search(r'memset\s*\(([^,]*),\s*([^,]*),\s*0\s*\)', line) - if match and not Match(r"^''|-?[0-9]+|0x[0-9A-Fa-f]$", match.group(2)): - error(filename, linenum, 'runtime/memset', 4, - 'Did you mean "memset(%s, 0, %s)"?' - % (match.group(1), match.group(2))) - - if Search(r'\busing namespace\b', line): - error(filename, linenum, 'build/namespaces', 5, - 'Do not use namespace using-directives. ' - 'Use using-declarations instead.') - - # Detect variable-length arrays. - match = Match(r'\s*(.+::)?(\w+) [a-z]\w*\[(.+)];', line) - if (match and match.group(2) != 'return' and match.group(2) != 'delete' and - match.group(3).find(']') == -1): - # Split the size using space and arithmetic operators as delimiters. - # If any of the resulting tokens are not compile time constants then - # report the error. - tokens = re.split(r'\s|\+|\-|\*|\/|<<|>>]', match.group(3)) - is_const = True - skip_next = False - for tok in tokens: - if skip_next: - skip_next = False - continue - - if Search(r'sizeof\(.+\)', tok): continue - if Search(r'arraysize\(\w+\)', tok): continue - - tok = tok.lstrip('(') - tok = tok.rstrip(')') - if not tok: continue - if Match(r'\d+', tok): continue - if Match(r'0[xX][0-9a-fA-F]+', tok): continue - if Match(r'k[A-Z0-9]\w*', tok): continue - if Match(r'(.+::)?k[A-Z0-9]\w*', tok): continue - if Match(r'(.+::)?[A-Z][A-Z0-9_]*', tok): continue - # A catch all for tricky sizeof cases, including 'sizeof expression', - # 'sizeof(*type)', 'sizeof(const type)', 'sizeof(struct StructName)' - # requires skipping the next token because we split on ' ' and '*'. - if tok.startswith('sizeof'): - skip_next = True - continue - is_const = False - break - if not is_const: - error(filename, linenum, 'runtime/arrays', 1, - 'Do not use variable-length arrays. Use an appropriately named ' - "('k' followed by CamelCase) compile-time constant for the size.") - - # If DISALLOW_EVIL_CONSTRUCTORS, DISALLOW_COPY_AND_ASSIGN, or - # DISALLOW_IMPLICIT_CONSTRUCTORS is present, then it should be the last thing - # in the class declaration. - match = Match( - (r'\s*' - r'(DISALLOW_(EVIL_CONSTRUCTORS|COPY_AND_ASSIGN|IMPLICIT_CONSTRUCTORS))' - r'\(.*\);$'), - line) - if match and linenum + 1 < clean_lines.NumLines(): - next_line = clean_lines.elided[linenum + 1] - # We allow some, but not all, declarations of variables to be present - # in the statement that defines the class. The [\w\*,\s]* fragment of - # the regular expression below allows users to declare instances of - # the class or pointers to instances, but not less common types such - # as function pointers or arrays. It's a tradeoff between allowing - # reasonable code and avoiding trying to parse more C++ using regexps. - if not Search(r'^\s*}[\w\*,\s]*;', next_line): - error(filename, linenum, 'readability/constructors', 3, - match.group(1) + ' should be the last thing in the class') - - # Check for use of unnamed namespaces in header files. Registration - # macros are typically OK, so we allow use of "namespace {" on lines - # that end with backslashes. - if (file_extension == 'h' - and Search(r'\bnamespace\s*{', line) - and line[-1] != '\\'): - error(filename, linenum, 'build/namespaces', 4, - 'Do not use unnamed namespaces in header files. See ' - 'http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml#Namespaces' - ' for more information.') - - -def CheckCStyleCast(filename, linenum, line, raw_line, cast_type, pattern, - error): - """Checks for a C-style cast by looking for the pattern. - - This also handles sizeof(type) warnings, due to similarity of content. - - Args: - filename: The name of the current file. - linenum: The number of the line to check. - line: The line of code to check. - raw_line: The raw line of code to check, with comments. - cast_type: The string for the C++ cast to recommend. This is either - reinterpret_cast, static_cast, or const_cast, depending. - pattern: The regular expression used to find C-style casts. - error: The function to call with any errors found. - - Returns: - True if an error was emitted. - False otherwise. - """ - match = Search(pattern, line) - if not match: - return False - - # e.g., sizeof(int) - sizeof_match = Match(r'.*sizeof\s*$', line[0:match.start(1) - 1]) - if sizeof_match: - error(filename, linenum, 'runtime/sizeof', 1, - 'Using sizeof(type). Use sizeof(varname) instead if possible') - return True - - # operator++(int) and operator--(int) - if (line[0:match.start(1) - 1].endswith(' operator++') or - line[0:match.start(1) - 1].endswith(' operator--')): - return False - - remainder = line[match.end(0):] - - # The close paren is for function pointers as arguments to a function. - # eg, void foo(void (*bar)(int)); - # The semicolon check is a more basic function check; also possibly a - # function pointer typedef. - # eg, void foo(int); or void foo(int) const; - # The equals check is for function pointer assignment. - # eg, void *(*foo)(int) = ... - # The > is for MockCallback<...> ... - # - # Right now, this will only catch cases where there's a single argument, and - # it's unnamed. It should probably be expanded to check for multiple - # arguments with some unnamed. - function_match = Match(r'\s*(\)|=|(const)?\s*(;|\{|throw\(\)|>))', remainder) - if function_match: - if (not function_match.group(3) or - function_match.group(3) == ';' or - ('MockCallback<' not in raw_line and - '/*' not in raw_line)): - error(filename, linenum, 'readability/function', 3, - 'All parameters should be named in a function') - return True - - # At this point, all that should be left is actual casts. - error(filename, linenum, 'readability/casting', 4, - 'Using C-style cast. Use %s<%s>(...) instead' % - (cast_type, match.group(1))) - - return True - - -_HEADERS_CONTAINING_TEMPLATES = ( - ('<deque>', ('deque',)), - ('<functional>', ('unary_function', 'binary_function', - 'plus', 'minus', 'multiplies', 'divides', 'modulus', - 'negate', - 'equal_to', 'not_equal_to', 'greater', 'less', - 'greater_equal', 'less_equal', - 'logical_and', 'logical_or', 'logical_not', - 'unary_negate', 'not1', 'binary_negate', 'not2', - 'bind1st', 'bind2nd', - 'pointer_to_unary_function', - 'pointer_to_binary_function', - 'ptr_fun', - 'mem_fun_t', 'mem_fun', 'mem_fun1_t', 'mem_fun1_ref_t', - 'mem_fun_ref_t', - 'const_mem_fun_t', 'const_mem_fun1_t', - 'const_mem_fun_ref_t', 'const_mem_fun1_ref_t', - 'mem_fun_ref', - )), - ('<limits>', ('numeric_limits',)), - ('<list>', ('list',)), - ('<map>', ('map', 'multimap',)), - ('<memory>', ('allocator',)), - ('<queue>', ('queue', 'priority_queue',)), - ('<set>', ('set', 'multiset',)), - ('<stack>', ('stack',)), - ('<string>', ('char_traits', 'basic_string',)), - ('<utility>', ('pair',)), - ('<vector>', ('vector',)), - - # gcc extensions. - # Note: std::hash is their hash, ::hash is our hash - ('<hash_map>', ('hash_map', 'hash_multimap',)), - ('<hash_set>', ('hash_set', 'hash_multiset',)), - ('<slist>', ('slist',)), - ) - -_RE_PATTERN_STRING = re.compile(r'\bstring\b') - -_re_pattern_algorithm_header = [] -for _template in ('copy', 'max', 'min', 'min_element', 'sort', 'swap', - 'transform'): - # Match max<type>(..., ...), max(..., ...), but not foo->max, foo.max or - # type::max(). - _re_pattern_algorithm_header.append( - (re.compile(r'[^>.]\b' + _template + r'(<.*?>)?\([^\)]'), - _template, - '<algorithm>')) - -_re_pattern_templates = [] -for _header, _templates in _HEADERS_CONTAINING_TEMPLATES: - for _template in _templates: - _re_pattern_templates.append( - (re.compile(r'(\<|\b)' + _template + r'\s*\<'), - _template + '<>', - _header)) - - -def FilesBelongToSameModule(filename_cc, filename_h): - """Check if these two filenames belong to the same module. - - The concept of a 'module' here is a as follows: - foo.h, foo-inl.h, foo.cc, foo_test.cc and foo_unittest.cc belong to the - same 'module' if they are in the same directory. - some/path/public/xyzzy and some/path/internal/xyzzy are also considered - to belong to the same module here. - - If the filename_cc contains a longer path than the filename_h, for example, - '/absolute/path/to/base/sysinfo.cc', and this file would include - 'base/sysinfo.h', this function also produces the prefix needed to open the - header. This is used by the caller of this function to more robustly open the - header file. We don't have access to the real include paths in this context, - so we need this guesswork here. - - Known bugs: tools/base/bar.cc and base/bar.h belong to the same module - according to this implementation. Because of this, this function gives - some false positives. This should be sufficiently rare in practice. - - Args: - filename_cc: is the path for the .cc file - filename_h: is the path for the header path - - Returns: - Tuple with a bool and a string: - bool: True if filename_cc and filename_h belong to the same module. - string: the additional prefix needed to open the header file. - """ - - if not filename_cc.endswith('.cc'): - return (False, '') - filename_cc = filename_cc[:-len('.cc')] - if filename_cc.endswith('_unittest'): - filename_cc = filename_cc[:-len('_unittest')] - elif filename_cc.endswith('_test'): - filename_cc = filename_cc[:-len('_test')] - filename_cc = filename_cc.replace('/public/', '/') - filename_cc = filename_cc.replace('/internal/', '/') - - if not filename_h.endswith('.h'): - return (False, '') - filename_h = filename_h[:-len('.h')] - if filename_h.endswith('-inl'): - filename_h = filename_h[:-len('-inl')] - filename_h = filename_h.replace('/public/', '/') - filename_h = filename_h.replace('/internal/', '/') - - files_belong_to_same_module = filename_cc.endswith(filename_h) - common_path = '' - if files_belong_to_same_module: - common_path = filename_cc[:-len(filename_h)] - return files_belong_to_same_module, common_path - - -def UpdateIncludeState(filename, include_state, io=codecs): - """Fill up the include_state with new includes found from the file. - - Args: - filename: the name of the header to read. - include_state: an _IncludeState instance in which the headers are inserted. - io: The io factory to use to read the file. Provided for testability. - - Returns: - True if a header was succesfully added. False otherwise. - """ - headerfile = None - try: - headerfile = io.open(filename, 'r', 'utf8', 'replace') - except IOError: - return False - linenum = 0 - for line in headerfile: - linenum += 1 - clean_line = CleanseComments(line) - match = _RE_PATTERN_INCLUDE.search(clean_line) - if match: - include = match.group(2) - # The value formatting is cute, but not really used right now. - # What matters here is that the key is in include_state. - include_state.setdefault(include, '%s:%d' % (filename, linenum)) - return True - - -def CheckForIncludeWhatYouUse(filename, clean_lines, include_state, error, - io=codecs): - """Reports for missing stl includes. - - This function will output warnings to make sure you are including the headers - necessary for the stl containers and functions that you use. We only give one - reason to include a header. For example, if you use both equal_to<> and - less<> in a .h file, only one (the latter in the file) of these will be - reported as a reason to include the <functional>. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - include_state: An _IncludeState instance. - error: The function to call with any errors found. - io: The IO factory to use to read the header file. Provided for unittest - injection. - """ - required = {} # A map of header name to linenumber and the template entity. - # Example of required: { '<functional>': (1219, 'less<>') } - - for linenum in xrange(clean_lines.NumLines()): - line = clean_lines.elided[linenum] - if not line or line[0] == '#': - continue - - # String is special -- it is a non-templatized type in STL. - matched = _RE_PATTERN_STRING.search(line) - if matched: - # Don't warn about strings in non-STL namespaces: - # (We check only the first match per line; good enough.) - prefix = line[:matched.start()] - if prefix.endswith('std::') or not prefix.endswith('::'): - required['<string>'] = (linenum, 'string') - - for pattern, template, header in _re_pattern_algorithm_header: - if pattern.search(line): - required[header] = (linenum, template) - - # The following function is just a speed up, no semantics are changed. - if not '<' in line: # Reduces the cpu time usage by skipping lines. - continue - - for pattern, template, header in _re_pattern_templates: - if pattern.search(line): - required[header] = (linenum, template) - - # The policy is that if you #include something in foo.h you don't need to - # include it again in foo.cc. Here, we will look at possible includes. - # Let's copy the include_state so it is only messed up within this function. - include_state = include_state.copy() - - # Did we find the header for this file (if any) and succesfully load it? - header_found = False - - # Use the absolute path so that matching works properly. - abs_filename = FileInfo(filename).FullName() - - # For Emacs's flymake. - # If cpplint is invoked from Emacs's flymake, a temporary file is generated - # by flymake and that file name might end with '_flymake.cc'. In that case, - # restore original file name here so that the corresponding header file can be - # found. - # e.g. If the file name is 'foo_flymake.cc', we should search for 'foo.h' - # instead of 'foo_flymake.h' - abs_filename = re.sub(r'_flymake\.cc$', '.cc', abs_filename) - - # include_state is modified during iteration, so we iterate over a copy of - # the keys. - header_keys = include_state.keys() - for header in header_keys: - (same_module, common_path) = FilesBelongToSameModule(abs_filename, header) - fullpath = common_path + header - if same_module and UpdateIncludeState(fullpath, include_state, io): - header_found = True - - # If we can't find the header file for a .cc, assume it's because we don't - # know where to look. In that case we'll give up as we're not sure they - # didn't include it in the .h file. - # TODO(unknown): Do a better job of finding .h files so we are confident that - # not having the .h file means there isn't one. - if filename.endswith('.cc') and not header_found: - return - - # All the lines have been processed, report the errors found. - for required_header_unstripped in required: - template = required[required_header_unstripped][1] - if required_header_unstripped.strip('<>"') not in include_state: - error(filename, required[required_header_unstripped][0], - 'build/include_what_you_use', 4, - 'Add #include ' + required_header_unstripped + ' for ' + template) - - -_RE_PATTERN_EXPLICIT_MAKEPAIR = re.compile(r'\bmake_pair\s*<') - - -def CheckMakePairUsesDeduction(filename, clean_lines, linenum, error): - """Check that make_pair's template arguments are deduced. - - G++ 4.6 in C++0x mode fails badly if make_pair's template arguments are - specified explicitly, and such use isn't intended in any case. - - Args: - filename: The name of the current file. - clean_lines: A CleansedLines instance containing the file. - linenum: The number of the line to check. - error: The function to call with any errors found. - """ - raw = clean_lines.raw_lines - line = raw[linenum] - match = _RE_PATTERN_EXPLICIT_MAKEPAIR.search(line) - if match: - error(filename, linenum, 'build/explicit_make_pair', - 4, # 4 = high confidence - 'For C++11-compatibility, omit template arguments from make_pair' - ' OR use pair directly OR if appropriate, construct a pair directly') - - -def ProcessLine(filename, file_extension, clean_lines, line, - include_state, function_state, nesting_state, error, - extra_check_functions=[]): - """Processes a single line in the file. - - Args: - filename: Filename of the file that is being processed. - file_extension: The extension (dot not included) of the file. - clean_lines: An array of strings, each representing a line of the file, - with comments stripped. - line: Number of line being processed. - include_state: An _IncludeState instance in which the headers are inserted. - function_state: A _FunctionState instance which counts function lines, etc. - nesting_state: A _NestingState instance which maintains information about - the current stack of nested blocks being parsed. - error: A callable to which errors are reported, which takes 4 arguments: - filename, line number, error level, and message - extra_check_functions: An array of additional check functions that will be - run on each source line. Each function takes 4 - arguments: filename, clean_lines, line, error - """ - raw_lines = clean_lines.raw_lines - ParseNolintSuppressions(filename, raw_lines[line], line, error) - nesting_state.Update(filename, clean_lines, line, error) - if nesting_state.stack and nesting_state.stack[-1].inline_asm != _NO_ASM: - return - CheckForFunctionLengths(filename, clean_lines, line, function_state, error) - CheckForMultilineCommentsAndStrings(filename, clean_lines, line, error) - CheckStyle(filename, clean_lines, line, file_extension, nesting_state, error) - CheckLanguage(filename, clean_lines, line, file_extension, include_state, - error) - CheckForNonStandardConstructs(filename, clean_lines, line, - nesting_state, error) - CheckPosixThreading(filename, clean_lines, line, error) - CheckInvalidIncrement(filename, clean_lines, line, error) - CheckMakePairUsesDeduction(filename, clean_lines, line, error) - for check_fn in extra_check_functions: - check_fn(filename, clean_lines, line, error) - -def ProcessFileData(filename, file_extension, lines, error, - extra_check_functions=[]): - """Performs lint checks and reports any errors to the given error function. - - Args: - filename: Filename of the file that is being processed. - file_extension: The extension (dot not included) of the file. - lines: An array of strings, each representing a line of the file, with the - last element being empty if the file is terminated with a newline. - error: A callable to which errors are reported, which takes 4 arguments: - filename, line number, error level, and message - extra_check_functions: An array of additional check functions that will be - run on each source line. Each function takes 4 - arguments: filename, clean_lines, line, error - """ - lines = (['// marker so line numbers and indices both start at 1'] + lines + - ['// marker so line numbers end in a known way']) - - include_state = _IncludeState() - function_state = _FunctionState() - nesting_state = _NestingState() - - ResetNolintSuppressions() - - CheckForCopyright(filename, lines, error) - - if file_extension == 'h': - CheckForHeaderGuard(filename, lines, error) - - RemoveMultiLineComments(filename, lines, error) - clean_lines = CleansedLines(lines) - for line in xrange(clean_lines.NumLines()): - ProcessLine(filename, file_extension, clean_lines, line, - include_state, function_state, nesting_state, error, - extra_check_functions) - nesting_state.CheckClassFinished(filename, error) - - CheckForIncludeWhatYouUse(filename, clean_lines, include_state, error) - - # We check here rather than inside ProcessLine so that we see raw - # lines rather than "cleaned" lines. - CheckForUnicodeReplacementCharacters(filename, lines, error) - - CheckForNewlineAtEOF(filename, lines, error) - -def ProcessFile(filename, vlevel, extra_check_functions=[]): - """Does google-lint on a single file. - - Args: - filename: The name of the file to parse. - - vlevel: The level of errors to report. Every error of confidence - >= verbose_level will be reported. 0 is a good default. - - extra_check_functions: An array of additional check functions that will be - run on each source line. Each function takes 4 - arguments: filename, clean_lines, line, error - """ - - _SetVerboseLevel(vlevel) - - try: - # Support the UNIX convention of using "-" for stdin. Note that - # we are not opening the file with universal newline support - # (which codecs doesn't support anyway), so the resulting lines do - # contain trailing '\r' characters if we are reading a file that - # has CRLF endings. - # If after the split a trailing '\r' is present, it is removed - # below. If it is not expected to be present (i.e. os.linesep != - # '\r\n' as in Windows), a warning is issued below if this file - # is processed. - - if filename == '-': - lines = codecs.StreamReaderWriter(sys.stdin, - codecs.getreader('utf8'), - codecs.getwriter('utf8'), - 'replace').read().split('\n') - else: - lines = codecs.open(filename, 'r', 'utf8', 'replace').read().split('\n') - - carriage_return_found = False - # Remove trailing '\r'. - for linenum in range(len(lines)): - if lines[linenum].endswith('\r'): - lines[linenum] = lines[linenum].rstrip('\r') - carriage_return_found = True - - except IOError: - sys.stderr.write( - "Skipping input '%s': Can't open for reading\n" % filename) - return - - # Note, if no dot is found, this will give the entire filename as the ext. - file_extension = filename[filename.rfind('.') + 1:] - - # When reading from stdin, the extension is unknown, so no cpplint tests - # should rely on the extension. - if (filename != '-' and file_extension != 'cc' and file_extension != 'h' - and file_extension != 'cpp'): - sys.stderr.write('Ignoring %s; not a .cc or .h file\n' % filename) - else: - ProcessFileData(filename, file_extension, lines, Error, - extra_check_functions) - if carriage_return_found and os.linesep != '\r\n': - # Use 0 for linenum since outputting only one error for potentially - # several lines. - Error(filename, 0, 'whitespace/newline', 1, - 'One or more unexpected \\r (^M) found;' - 'better to use only a \\n') - - sys.stderr.write('Done processing %s\n' % filename) - - -def PrintUsage(message): - """Prints a brief usage string and exits, optionally with an error message. - - Args: - message: The optional error message. - """ - sys.stderr.write(_USAGE) - if message: - sys.exit('\nFATAL ERROR: ' + message) - else: - sys.exit(1) - - -def PrintCategories(): - """Prints a list of all the error-categories used by error messages. - - These are the categories used to filter messages via --filter. - """ - sys.stderr.write(''.join(' %s\n' % cat for cat in _ERROR_CATEGORIES)) - sys.exit(0) - - -def ParseArguments(args): - """Parses the command line arguments. - - This may set the output format and verbosity level as side-effects. - - Args: - args: The command line arguments: - - Returns: - The list of filenames to lint. - """ - try: - (opts, filenames) = getopt.getopt(args, '', ['help', 'output=', 'verbose=', - 'counting=', - 'filter=', - 'root=']) - except getopt.GetoptError: - PrintUsage('Invalid arguments.') - - verbosity = _VerboseLevel() - output_format = _OutputFormat() - filters = '' - counting_style = '' - - for (opt, val) in opts: - if opt == '--help': - PrintUsage(None) - elif opt == '--output': - if not val in ('emacs', 'vs7', 'eclipse'): - PrintUsage('The only allowed output formats are emacs, vs7 and eclipse.') - output_format = val - elif opt == '--verbose': - verbosity = int(val) - elif opt == '--filter': - filters = val - if not filters: - PrintCategories() - elif opt == '--counting': - if val not in ('total', 'toplevel', 'detailed'): - PrintUsage('Valid counting options are total, toplevel, and detailed') - counting_style = val - elif opt == '--root': - global _root - _root = val - - if not filenames: - PrintUsage('No files were specified.') - - _SetOutputFormat(output_format) - _SetVerboseLevel(verbosity) - _SetFilters(filters) - _SetCountingStyle(counting_style) - - return filenames - - -def main(): - filenames = ParseArguments(sys.argv[1:]) - - # Change stderr to write with replacement characters so we don't die - # if we try to print something containing non-ASCII characters. - sys.stderr = codecs.StreamReaderWriter(sys.stderr, - codecs.getreader('utf8'), - codecs.getwriter('utf8'), - 'replace') - - _cpplint_state.ResetErrorCounts() - for filename in filenames: - ProcessFile(filename, _cpplint_state.verbose_level) - _cpplint_state.PrintErrorCounts() - - sys.exit(_cpplint_state.error_count > 0) - - -if __name__ == '__main__': - main() |