gpxe: delete long since obsolete snapshot of gPXE

gPXE has been deprecated in favor of iPXE for many, many years now.
It is much better than users get it directly from the iPXE project,
since we should no longer need any special modifications for Syslinux
use.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

1 files changed, 0 insertions, 218 deletions

diff --git a/gpxe/src/arch/i386/prefix/bootpart.S b/gpxe/src/arch/i386/prefix/bootpart.S
deleted file mode 100644
index 968da1a3..00000000
--- a/gpxe/src/arch/i386/prefix/bootpart.S
+++ /dev/null
@@ -1,218 +0,0 @@
-FILE_LICENCE ( GPL2_OR_LATER )
-
-#define BOOT_SEG	0x07c0
-#define EXEC_SEG	0x0100
-#define STACK_SEG 	0x0200
-#define STACK_SIZE	0x2000
-	
-	.text
-	.arch i386
-	.section ".prefix", "awx", @progbits
-	.code16
-
-/*
- * Find active partition
- *
- * Parameters:
- *   %dl	: BIOS drive number
- *   %bp	: Active partition handler routine
- */
-find_active_partition:
-	/* Set up stack at STACK_SEG:STACK_SIZE */
-	movw	$STACK_SEG, %ax
-	movw	%ax, %ss
-	movw	$STACK_SIZE, %sp
-
-	/* Relocate self to EXEC_SEG */
-	pushw	$BOOT_SEG
-	popw	%ds
-	pushw	$EXEC_SEG
-	popw	%es
-	xorw	%si, %si
-	xorw	%di, %di
-	movw	$0x200, %cx
-	rep movsb
-	ljmp	$EXEC_SEG, $1f
-1:	pushw	%ds
-	popw	%es
-	pushw	%cs
-	popw	%ds
-
-	/* Check for LBA extensions */
-	movb	$0x41, %ah
-	movw	$0x55aa, %bx
-	stc
-	int	$0x13
-	jc	1f
-	cmpw	$0xaa55, %bx
-	jne	1f
-	movw	$read_lba, read_sectors
-1:	
-	/* Read and process root partition table */
-	xorb	%dh, %dh
-	movw	$0x0001, %cx
-	xorl	%esi, %esi
-	xorl	%edi, %edi
-	call	process_table
-
-	/* Print failure message */
-	movw	$10f, %si
-	jmp	boot_error
-10:	.asciz	"Could not locate active partition\r\n"
-
-/*
- * Print failure message and boot next device
- *
- * Parameters:
- *   %si	: Failure string
- */
-boot_error:
-	cld
-	movw	$0x0007, %bx
-	movb	$0x0e, %ah
-1:	lodsb
-	testb	%al, %al
-	je	99f
-	int	$0x10
-	jmp	1b
-99:	/* Boot next device */
-	int	$0x18
-
-/*
- * Process partition table
- *
- * Parameters:
- *   %dl	: BIOS drive number
- *   %dh	: Head
- *   %cl	: Sector (bits 0-5), high two bits of cylinder (bits 6-7)
- *   %ch	: Low eight bits of cylinder
- *   %esi:%edi	: LBA address
- *   %bp	: Active partition handler routine
- *
- * Returns:
- *   CF set on error
- */
-process_table:
-	pushal
-	call	read_boot_sector
-	jc	99f
-	movw	$446, %bx
-1:	call	process_partition
-	addw	$16, %bx
-	cmpw	$510, %bx
-	jne	1b
-99:	popal
-	ret
-
-/*
- * Process partition
- *
- * Parameters:
- *   %dl	: BIOS drive number
- *   %dh	: Head
- *   %cl	: Sector (bits 0-5), high two bits of cylinder (bits 6-7)
- *   %ch	: Low eight bits of cylinder
- *   %esi:%edi	: LBA address
- *   %bx	: Offset within partition table
- *   %bp	: Active partition handler routine
- */
-process_partition:
-	pushal
-	/* Load C/H/S values from partition entry */
-	movb	%es:1(%bx), %dh
-	movw	%es:2(%bx), %cx
-	/* Update LBA address from partition entry */
-	addl	%es:8(%bx), %edi
-	adcl	$0, %esi
-	/* Check active flag */
-	testb	$0x80, %es:(%bx)
-	jz	1f
-	call	read_boot_sector
-	jc	99f
-	jmp	*%bp
-1:	/* Check for extended partition */
-	movb	%es:4(%bx), %al
-	cmpb	$0x05, %al
-	je	2f
-	cmpb	$0x0f, %al
-	je	2f
-	cmpb	$0x85, %al
-	jne	99f
-2:	call	process_table
-99:	popal
-	/* Reload original partition table */
-	call	read_boot_sector
-	ret
-
-/*
- * Read single sector to %es:0000 and verify 0x55aa signature
- *
- * Parameters:
- *   %dl	: BIOS drive number
- *   %dh	: Head
- *   %cl	: Sector (bits 0-5), high two bits of cylinder (bits 6-7)
- *   %ch	: Low eight bits of cylinder
- *   %esi:%edi	: LBA address
- *
- * Returns:
- *   CF set on error
- */
-read_boot_sector:
-	pushw	%ax
-	movw	$1, %ax
-	call	*read_sectors
-	jc	99f
-	cmpw	$0xaa55, %es:(510)
-	je	99f
-	stc	
-99:	popw	%ax
-	ret
-	
-/*
- * Read sectors to %es:0000
- *
- * Parameters:
- *   %dl	: BIOS drive number
- *   %dh	: Head
- *   %cl	: Sector (bits 0-5), high two bits of cylinder (bits 6-7)
- *   %ch	: Low eight bits of cylinder
- *   %esi:%edi	: LBA address
- *   %ax	: Number of sectors (max 127)
- *
- * Returns:
- *   CF set on error
- */
-read_sectors:	.word	read_chs
-
-read_chs:
-	/* Read sectors using C/H/S address */
-	pushal
-	xorw	%bx, %bx
-	movb	$0x02, %ah
-	stc
-	int	$0x13
-	sti
-	popal
-	ret
-
-read_lba:
-	/* Read sectors using LBA address */
-	pushal
-	movw	%ax, (lba_desc + 2)
-	pushw	%es
-	popw	(lba_desc + 6)
-	movl	%edi, (lba_desc + 8)
-	movl	%esi, (lba_desc + 12)
-	movw	$lba_desc, %si
-	movb	$0x42, %ah
-	int	$0x13
-	popal
-	ret
-
-lba_desc:
-	.byte	0x10
-	.byte	0
-	.word	1
-	.word	0x0000
-	.word	0x0000
-	.long	0, 0