gpxe: delete long since obsolete snapshot of gPXE

gPXE has been deprecated in favor of iPXE for many, many years now.
It is much better than users get it directly from the iPXE project,
since we should no longer need any special modifications for Syslinux
use.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

1 files changed, 0 insertions, 359 deletions

diff --git a/gpxe/src/drivers/net/rtl818x/rtl818x.h b/gpxe/src/drivers/net/rtl818x/rtl818x.h
deleted file mode 100644
index 15821fa9..00000000
--- a/gpxe/src/drivers/net/rtl818x/rtl818x.h
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Definitions for RTL818x hardware
- *
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
- *
- * Modified for gPXE, June 2009, by Joshua Oreman <oremanj@rwcr.net>
- *
- * Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef RTL818X_H
-#define RTL818X_H
-
-#include <gpxe/spi_bit.h>
-#include <gpxe/tables.h>
-
-FILE_LICENCE(GPL2_ONLY);
-
-struct rtl818x_csr {
-	u8	MAC[6];
-	u8	reserved_0[2];
-	u32	MAR[2];
-	u8	RX_FIFO_COUNT;
-	u8	reserved_1;
-	u8	TX_FIFO_COUNT;
-	u8	BQREQ;
-	u8	reserved_2[4];
-	u32	TSFT[2];
-	u32	TLPDA;
-	u32	TNPDA;
-	u32	THPDA;
-	u16	BRSR;
-	u8	BSSID[6];
-	u8	RESP_RATE;
-	u8	EIFS;
-	u8	reserved_3[1];
-	u8	CMD;
-#define RTL818X_CMD_TX_ENABLE		(1 << 2)
-#define RTL818X_CMD_RX_ENABLE		(1 << 3)
-#define RTL818X_CMD_RESET		(1 << 4)
-	u8	reserved_4[4];
-	u16	INT_MASK;
-	u16	INT_STATUS;
-#define RTL818X_INT_RX_OK		(1 <<  0)
-#define RTL818X_INT_RX_ERR		(1 <<  1)
-#define RTL818X_INT_TXL_OK		(1 <<  2)
-#define RTL818X_INT_TXL_ERR		(1 <<  3)
-#define RTL818X_INT_RX_DU		(1 <<  4)
-#define RTL818X_INT_RX_FO		(1 <<  5)
-#define RTL818X_INT_TXN_OK		(1 <<  6)
-#define RTL818X_INT_TXN_ERR		(1 <<  7)
-#define RTL818X_INT_TXH_OK		(1 <<  8)
-#define RTL818X_INT_TXH_ERR		(1 <<  9)
-#define RTL818X_INT_TXB_OK		(1 << 10)
-#define RTL818X_INT_TXB_ERR		(1 << 11)
-#define RTL818X_INT_ATIM		(1 << 12)
-#define RTL818X_INT_BEACON		(1 << 13)
-#define RTL818X_INT_TIME_OUT		(1 << 14)
-#define RTL818X_INT_TX_FO		(1 << 15)
-	u32	TX_CONF;
-#define RTL818X_TX_CONF_LOOPBACK_MAC	(1 << 17)
-#define RTL818X_TX_CONF_LOOPBACK_CONT	(3 << 17)
-#define RTL818X_TX_CONF_NO_ICV		(1 << 19)
-#define RTL818X_TX_CONF_DISCW		(1 << 20)
-#define RTL818X_TX_CONF_SAT_HWPLCP	(1 << 24)
-#define RTL818X_TX_CONF_R8180_ABCD	(2 << 25)
-#define RTL818X_TX_CONF_R8180_F		(3 << 25)
-#define RTL818X_TX_CONF_R8185_ABC	(4 << 25)
-#define RTL818X_TX_CONF_R8185_D		(5 << 25)
-#define RTL818X_TX_CONF_R8187vD		(5 << 25)
-#define RTL818X_TX_CONF_R8187vD_B	(6 << 25)
-#define RTL818X_TX_CONF_HWVER_MASK	(7 << 25)
-#define RTL818X_TX_CONF_DISREQQSIZE	(1 << 28)
-#define RTL818X_TX_CONF_PROBE_DTS	(1 << 29)
-#define RTL818X_TX_CONF_HW_SEQNUM	(1 << 30)
-#define RTL818X_TX_CONF_CW_MIN		(1 << 31)
-	u32	RX_CONF;
-#define RTL818X_RX_CONF_MONITOR		(1 <<  0)
-#define RTL818X_RX_CONF_NICMAC		(1 <<  1)
-#define RTL818X_RX_CONF_MULTICAST	(1 <<  2)
-#define RTL818X_RX_CONF_BROADCAST	(1 <<  3)
-#define RTL818X_RX_CONF_FCS		(1 <<  5)
-#define RTL818X_RX_CONF_DATA		(1 << 18)
-#define RTL818X_RX_CONF_CTRL		(1 << 19)
-#define RTL818X_RX_CONF_MGMT		(1 << 20)
-#define RTL818X_RX_CONF_ADDR3		(1 << 21)
-#define RTL818X_RX_CONF_PM		(1 << 22)
-#define RTL818X_RX_CONF_BSSID		(1 << 23)
-#define RTL818X_RX_CONF_RX_AUTORESETPHY	(1 << 28)
-#define RTL818X_RX_CONF_CSDM1		(1 << 29)
-#define RTL818X_RX_CONF_CSDM2		(1 << 30)
-#define RTL818X_RX_CONF_ONLYERLPKT	(1 << 31)
-	u32	INT_TIMEOUT;
-	u32	TBDA;
-	u8	EEPROM_CMD;
-#define RTL818X_EEPROM_CMD_READ		(1 << 0)
-#define RTL818X_EEPROM_CMD_WRITE	(1 << 1)
-#define RTL818X_EEPROM_CMD_CK		(1 << 2)
-#define RTL818X_EEPROM_CMD_CS		(1 << 3)
-#define RTL818X_EEPROM_CMD_NORMAL	(0 << 6)
-#define RTL818X_EEPROM_CMD_LOAD		(1 << 6)
-#define RTL818X_EEPROM_CMD_PROGRAM	(2 << 6)
-#define RTL818X_EEPROM_CMD_CONFIG	(3 << 6)
-	u8	CONFIG0;
-	u8	CONFIG1;
-	u8	CONFIG2;
-#define RTL818X_CONFIG2_ANTENNA_DIV	(1 << 6)
-	u32	ANAPARAM;
-	u8	MSR;
-#define RTL818X_MSR_NO_LINK		(0 << 2)
-#define RTL818X_MSR_ADHOC		(1 << 2)
-#define RTL818X_MSR_INFRA		(2 << 2)
-#define RTL818X_MSR_MASTER		(3 << 2)
-#define RTL818X_MSR_ENEDCA		(4 << 2)
-	u8	CONFIG3;
-#define RTL818X_CONFIG3_ANAPARAM_WRITE	(1 << 6)
-#define RTL818X_CONFIG3_GNT_SELECT	(1 << 7)
-	u8	CONFIG4;
-#define RTL818X_CONFIG4_POWEROFF	(1 << 6)
-#define RTL818X_CONFIG4_VCOOFF		(1 << 7)
-	u8	TESTR;
-	u8	reserved_9[2];
-	u8	PGSELECT;
-	u8	SECURITY;
-	u32	ANAPARAM2;
-	u8	reserved_10[12];
-	u16	BEACON_INTERVAL;
-	u16	ATIM_WND;
-	u16	BEACON_INTERVAL_TIME;
-	u16	ATIMTR_INTERVAL;
-	u8	PHY_DELAY;
-	u8	CARRIER_SENSE_COUNTER;
-	u8	reserved_11[2];
-	u8	PHY[4];
-	u16	RFPinsOutput;
-	u16	RFPinsEnable;
-	u16	RFPinsSelect;
-	u16	RFPinsInput;
-	u32	RF_PARA;
-	u32	RF_TIMING;
-	u8	GP_ENABLE;
-	u8	GPIO;
-	u8	reserved_12[2];
-	u32	HSSI_PARA;
-	u8	reserved_13[4];
-	u8	TX_AGC_CTL;
-#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT		(1 << 0)
-#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT	(1 << 1)
-#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT			(1 << 2)
-	u8	TX_GAIN_CCK;
-	u8	TX_GAIN_OFDM;
-	u8	TX_ANTENNA;
-	u8	reserved_14[16];
-	u8	WPA_CONF;
-	u8	reserved_15[3];
-	u8	SIFS;
-	u8	DIFS;
-	u8	SLOT;
-	u8	reserved_16[5];
-	u8	CW_CONF;
-#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT	(1 << 0)
-#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT	(1 << 1)
-	u8	CW_VAL;
-	u8	RATE_FALLBACK;
-#define RTL818X_RATE_FALLBACK_ENABLE	(1 << 7)
-	u8	ACM_CONTROL;
-	u8	reserved_17[24];
-	u8	CONFIG5;
-	u8	TX_DMA_POLLING;
-	u8	reserved_18[2];
-	u16	CWR;
-	u8	RETRY_CTR;
-	u8	reserved_19[3];
-	u16	INT_MIG;
-/* RTL818X_R8187B_*: magic numbers from ioregisters */
-#define RTL818X_R8187B_B	0
-#define RTL818X_R8187B_D	1
-#define RTL818X_R8187B_E	2
-	u32	RDSAR;
-	u16	TID_AC_MAP;
-	u8	reserved_20[4];
-	u8	ANAPARAM3;
-	u8	reserved_21[5];
-	u16	FEMR;
-	u8	reserved_22[4];
-	u16	TALLY_CNT;
-	u8	TALLY_SEL;
-} __attribute__((packed));
-
-#define MAX_RX_SIZE IEEE80211_MAX_FRAME_LEN
-
-#define RF_PARAM_ANALOGPHY	(1 << 0)
-#define RF_PARAM_ANTBDEFAULT	(1 << 1)
-#define RF_PARAM_CARRIERSENSE1	(1 << 2)
-#define RF_PARAM_CARRIERSENSE2	(1 << 3)
-
-#define BB_ANTATTEN_CHAN14	0x0C
-#define BB_ANTENNA_B 		0x40
-
-#define BB_HOST_BANG 		(1 << 30)
-#define BB_HOST_BANG_EN 	(1 << 2)
-#define BB_HOST_BANG_CLK 	(1 << 1)
-#define BB_HOST_BANG_DATA	1
-
-#define ANAPARAM_TXDACOFF_SHIFT	27
-#define ANAPARAM_PWR0_SHIFT	28
-#define ANAPARAM_PWR0_MASK 	(0x07 << ANAPARAM_PWR0_SHIFT)
-#define ANAPARAM_PWR1_SHIFT	20
-#define ANAPARAM_PWR1_MASK	(0x7F << ANAPARAM_PWR1_SHIFT)
-
-#define RTL818X_RX_RING_SIZE	8 /* doesn't have to be a power of 2 */
-#define RTL818X_TX_RING_SIZE	8 /* nor this [but 2^n is very slightly faster] */
-#define RTL818X_RING_ALIGN	256
-
-#define RTL818X_MAX_RETRIES     4
-
-enum rtl818x_tx_desc_flags {
-	RTL818X_TX_DESC_FLAG_NO_ENC	= (1 << 15),
-	RTL818X_TX_DESC_FLAG_TX_OK	= (1 << 15),
-	RTL818X_TX_DESC_FLAG_SPLCP	= (1 << 16),
-	RTL818X_TX_DESC_FLAG_RX_UNDER	= (1 << 16),
-	RTL818X_TX_DESC_FLAG_MOREFRAG	= (1 << 17),
-	RTL818X_TX_DESC_FLAG_CTS	= (1 << 18),
-	RTL818X_TX_DESC_FLAG_RTS	= (1 << 23),
-	RTL818X_TX_DESC_FLAG_LS		= (1 << 28),
-	RTL818X_TX_DESC_FLAG_FS		= (1 << 29),
-	RTL818X_TX_DESC_FLAG_DMA	= (1 << 30),
-	RTL818X_TX_DESC_FLAG_OWN	= (1 << 31)
-};
-
-struct rtl818x_tx_desc {
-	u32 flags;
-	u16 rts_duration;
-	u16 plcp_len;
-	u32 tx_buf;
-	u32 frame_len;
-	u32 next_tx_desc;
-	u8 cw;
-	u8 retry_limit;
-	u8 agc;
-	u8 flags2;
-	u32 reserved[2];
-} __attribute__ ((packed));
-
-enum rtl818x_rx_desc_flags {
-	RTL818X_RX_DESC_FLAG_ICV_ERR	= (1 << 12),
-	RTL818X_RX_DESC_FLAG_CRC32_ERR	= (1 << 13),
-	RTL818X_RX_DESC_FLAG_PM		= (1 << 14),
-	RTL818X_RX_DESC_FLAG_RX_ERR	= (1 << 15),
-	RTL818X_RX_DESC_FLAG_BCAST	= (1 << 16),
-	RTL818X_RX_DESC_FLAG_PAM	= (1 << 17),
-	RTL818X_RX_DESC_FLAG_MCAST	= (1 << 18),
-	RTL818X_RX_DESC_FLAG_QOS	= (1 << 19), /* RTL8187(B) only */
-	RTL818X_RX_DESC_FLAG_TRSW	= (1 << 24), /* RTL8187(B) only */
-	RTL818X_RX_DESC_FLAG_SPLCP	= (1 << 25),
-	RTL818X_RX_DESC_FLAG_FOF	= (1 << 26),
-	RTL818X_RX_DESC_FLAG_DMA_FAIL	= (1 << 27),
-	RTL818X_RX_DESC_FLAG_LS		= (1 << 28),
-	RTL818X_RX_DESC_FLAG_FS		= (1 << 29),
-	RTL818X_RX_DESC_FLAG_EOR	= (1 << 30),
-	RTL818X_RX_DESC_FLAG_OWN	= (1 << 31)
-};
-
-struct rtl818x_rx_desc {
-	u32 flags;
-	u32 flags2;
-	union {
-		u32 rx_buf;
-		u64 tsft;
-	};
-} __attribute__ ((packed));
-
-struct rtl818x_priv {
-	struct rtl818x_csr *map;
-	const struct rtl818x_rf_ops *rf;
-	int rf_flag; /* whatever RF driver wishes to use it for */
-	int hw_rate;
-	int hw_rtscts_rate;
-
-	struct spi_bit_basher spibit;
-	struct spi_device eeprom;
-
-	struct rtl818x_rx_desc *rx_ring;
-	u32 rx_ring_dma;
-	unsigned int rx_idx;	/* next desc to be filled by card */
-	struct io_buffer *rx_buf[RTL818X_RX_RING_SIZE];
-
-	struct rtl818x_tx_desc *tx_ring;
-	u32 tx_ring_dma;
-	unsigned int tx_cons;	/* next desc to be filled by card */
-	unsigned int tx_prod;	/* next desc to be filled by driver */
-	struct io_buffer *tx_buf[RTL818X_TX_RING_SIZE];
-
-	struct pci_device *pdev;
-	u32 rx_conf;
-
-	u16 txpower[14];
-
-	int r8185;
-	u32 anaparam;
-	u16 rfparam;
-	u8 csthreshold;
-};
-
-void rtl818x_write_phy(struct net80211_device *dev, u8 addr, u32 data);
-void rtl818x_set_anaparam(struct rtl818x_priv *priv, u32 anaparam);
-
-static inline u8 rtl818x_ioread8(struct rtl818x_priv *priv __unused, u8 *addr)
-{
-	return inb(addr);
-}
-
-static inline u16 rtl818x_ioread16(struct rtl818x_priv *priv __unused, u16 *addr)
-{
-	return inw(addr);
-}
-
-static inline u32 rtl818x_ioread32(struct rtl818x_priv *priv __unused, u32 *addr)
-{
-	return inl(addr);
-}
-
-static inline void rtl818x_iowrite8(struct rtl818x_priv *priv __unused,
-				    u8 *addr, u8 val)
-{
-	outb(val, addr);
-}
-
-static inline void rtl818x_iowrite16(struct rtl818x_priv *priv __unused,
-				     u16 *addr, u16 val)
-{
-	outw(val, addr);
-}
-
-static inline void rtl818x_iowrite32(struct rtl818x_priv *priv __unused,
-				     u32 *addr, u32 val)
-{
-	outl(val, addr);
-}
-
-#define RTL818X_RF_DRIVERS __table(struct rtl818x_rf_ops, "rtl818x_rf_drivers")
-#define __rtl818x_rf_driver __table_entry(RTL818X_RF_DRIVERS, 01)
-
-struct rtl818x_rf_ops {
-	char *name;
-	u8 id;			/* as identified in EEPROM */
-	void (*init)(struct net80211_device *dev);
-	void (*stop)(struct net80211_device *dev);
-	void (*set_chan)(struct net80211_device *dev, struct net80211_channel *chan);
-	void (*conf_erp)(struct net80211_device *dev); /* set based on dev->erp_flags */
-};
-
-#endif /* RTL818X_H */