1 files changed, 0 insertions, 292 deletions
diff --git a/gpxe/src/arch/i386/include/int13.h b/gpxe/src/arch/i386/include/int13.h
deleted file mode 100644
index e1884d94..00000000
--- a/gpxe/src/arch/i386/include/int13.h
+++ /dev/null
@@ -1,292 +0,0 @@
-#ifndef INT13_H
-#define INT13_H
-
-/** @file
- *
- * INT 13 emulation
- *
- */
-
-FILE_LICENCE ( GPL2_OR_LATER );
-
-#include <stdint.h>
-#include <gpxe/list.h>
-#include <realmode.h>
-
-struct block_device;
-
-/**
- * @defgroup int13ops INT 13 operation codes
- * @{
- */
-
-/** Reset disk system */
-#define INT13_RESET			0x00
-/** Get status of last operation */
-#define INT13_GET_LAST_STATUS		0x01
-/** Read sectors */
-#define INT13_READ_SECTORS		0x02
-/** Write sectors */
-#define INT13_WRITE_SECTORS		0x03
-/** Get drive parameters */
-#define INT13_GET_PARAMETERS		0x08
-/** Get disk type */
-#define INT13_GET_DISK_TYPE		0x15
-/** Extensions installation check */
-#define INT13_EXTENSION_CHECK		0x41
-/** Extended read */
-#define INT13_EXTENDED_READ		0x42
-/** Extended write */
-#define INT13_EXTENDED_WRITE		0x43
-/** Get extended drive parameters */
-#define INT13_GET_EXTENDED_PARAMETERS	0x48
-/** Get CD-ROM status / terminate emulation */
-#define INT13_CDROM_STATUS_TERMINATE	0x4b
-
-/** @} */
-
-/**
- * @defgroup int13status INT 13 status codes
- * @{
- */
-
-/** Operation completed successfully */
-#define INT13_STATUS_SUCCESS		0x00
-/** Invalid function or parameter */
-#define INT13_STATUS_INVALID		0x01
-/** Read error */
-#define INT13_STATUS_READ_ERROR		0x04
-/** Write error */
-#define INT13_STATUS_WRITE_ERROR	0xcc
-
-/** @} */
-
-/** Block size for non-extended INT 13 calls */
-#define INT13_BLKSIZE 512
-
-/** An INT 13 emulated drive */
-struct int13_drive {
-	/** List of all registered drives */
-	struct list_head list;
-
-	/** Underlying block device */
-	struct block_device *blockdev;
-
-	/** BIOS in-use drive number (0x80-0xff) */
-	unsigned int drive;
-	/** BIOS natural drive number (0x80-0xff)
-	 *
-	 * This is the drive number that would have been assigned by
-	 * 'naturally' appending the drive to the end of the BIOS
-	 * drive list.
-	 *
-	 * If the emulated drive replaces a preexisting drive, this is
-	 * the drive number that the preexisting drive gets remapped
-	 * to.
-	 */
-	unsigned int natural_drive;
-
-	/** Number of cylinders
-	 *
-	 * The cylinder number field in an INT 13 call is ten bits
-	 * wide, giving a maximum of 1024 cylinders.  Conventionally,
-	 * when the 7.8GB limit of a CHS address is exceeded, it is
-	 * the number of cylinders that is increased beyond the
-	 * addressable limit.
-	 */
-	unsigned int cylinders;
-	/** Number of heads
-	 *
-	 * The head number field in an INT 13 call is eight bits wide,
-	 * giving a maximum of 256 heads.  However, apparently all
-	 * versions of MS-DOS up to and including Win95 fail with 256
-	 * heads, so the maximum encountered in practice is 255.
-	 */
-	unsigned int heads;
-	/** Number of sectors per track
-	 *
-	 * The sector number field in an INT 13 call is six bits wide,
-	 * giving a maximum of 63 sectors, since sector numbering
-	 * (unlike head and cylinder numbering) starts at 1, not 0.
-	 */
-	unsigned int sectors_per_track;
-
-	/** Status of last operation */
-	int last_status;
-};
-
-/** An INT 13 disk address packet */
-struct int13_disk_address {
-	/** Size of the packet, in bytes */
-	uint8_t bufsize;
-	/** Reserved, must be zero */
-	uint8_t reserved;
-	/** Block count */
-	uint16_t count;
-	/** Data buffer */
-	struct segoff buffer;
-	/** Starting block number */
-	uint64_t lba;
-	/** Data buffer (EDD-3.0 only) */
-	uint64_t buffer_phys;
-} __attribute__ (( packed ));
-
-/** INT 13 disk parameters */
-struct int13_disk_parameters {
-	/** Size of this structure */
-	uint16_t bufsize;
-	/** Flags */
-	uint16_t flags;
-	/** Number of cylinders */
-	uint32_t cylinders;
-	/** Number of heads */
-	uint32_t heads;
-	/** Number of sectors per track */
-	uint32_t sectors_per_track;
-	/** Total number of sectors on drive */
-	uint64_t sectors;
-	/** Bytes per sector */
-	uint16_t sector_size;
-	
-} __attribute__ (( packed ));
-
-/**
- * @defgroup int13types INT 13 disk types
- * @{
- */
-
-/** No such drive */
-#define INT13_DISK_TYPE_NONE	0x00
-/** Floppy without change-line support */
-#define INT13_DISK_TYPE_FDD	0x01
-/** Floppy with change-line support */
-#define INT13_DISK_TYPE_FDD_CL	0x02
-/** Hard disk */
-#define INT13_DISK_TYPE_HDD	0x03
-
-/** @} */
-
-/**
- * @defgroup int13flags INT 13 disk parameter flags
- * @{
- */
-
-/** DMA boundary errors handled transparently */
-#define INT13_FL_DMA_TRANSPARENT 0x01
-/** CHS information is valid */
-#define INT13_FL_CHS_VALID	 0x02
-/** Removable drive */
-#define INT13_FL_REMOVABLE	 0x04
-/** Write with verify supported */
-#define INT13_FL_VERIFIABLE	 0x08
-/** Has change-line supported (valid only for removable drives) */
-#define INT13_FL_CHANGE_LINE	 0x10
-/** Drive can be locked (valid only for removable drives) */
-#define INT13_FL_LOCKABLE	 0x20
-/** CHS is max possible, not current media (valid only for removable drives) */
-#define INT13_FL_CHS_MAX	 0x40
-
-/** @} */
-
-/**
- * @defgroup int13exts INT 13 extension flags
- * @{
- */
-
-/** Extended disk access functions supported */
-#define INT13_EXTENSION_LINEAR		0x01
-/** Removable drive functions supported */
-#define INT13_EXTENSION_REMOVABLE	0x02
-/** EDD functions supported */
-#define INT13_EXTENSION_EDD		0x04
-
-/** @} */
-
-/**
- * @defgroup int13vers INT 13 extension versions
- * @{
- */
-
-/** INT13 extensions version 1.x */
-#define INT13_EXTENSION_VER_1_X		0x01
-/** INT13 extensions version 2.0 (EDD-1.0) */
-#define INT13_EXTENSION_VER_2_0		0x20
-/** INT13 extensions version 2.1 (EDD-1.1) */
-#define INT13_EXTENSION_VER_2_1		0x21
-/** INT13 extensions version 3.0 (EDD-3.0) */
-#define INT13_EXTENSION_VER_3_0		0x30
-
-/** @} */ 
-
-/** Bootable CD-ROM specification packet */
-struct int13_cdrom_specification {
-	/** Size of packet in bytes */
-	uint8_t size;
-	/** Boot media type */
-	uint8_t media_type;
-	/** Drive number */
-	uint8_t drive;
-	/** CD-ROM controller number */
-	uint8_t controller;
-	/** LBA of disk image to emulate */
-	uint32_t lba;
-	/** Device specification */
-	uint16_t device;
-	/** Segment of 3K buffer for caching CD-ROM reads */
-	uint16_t cache_segment;
-	/** Load segment for initial boot image */
-	uint16_t load_segment;
-	/** Number of 512-byte sectors to load */
-	uint16_t load_sectors;
-	/** Low 8 bits of cylinder number */
-	uint8_t cyl;
-	/** Sector number, plus high 2 bits of cylinder number */
-	uint8_t cyl_sector;
-	/** Head number */
-	uint8_t head;
-} __attribute__ (( packed ));
-
-/** A C/H/S address within a partition table entry */
-struct partition_chs {
-	/** Head number */
-	uint8_t head;
-	/** Sector number, plus high 2 bits of cylinder number */
-	uint8_t cyl_sector;
-	/** Low 8 bits of cylinder number */
-	uint8_t cyl;
-} __attribute__ (( packed ));
-
-#define PART_HEAD(chs) ( (chs).head )
-#define PART_SECTOR(chs) ( (chs).cyl_sector & 0x3f )
-#define PART_CYLINDER(chs) ( (chs).cyl | ( ( (chs).cyl_sector & 0xc0 ) << 2 ) )
-
-/** A partition table entry within the MBR */
-struct partition_table_entry {
-	/** Bootable flag */
-	uint8_t bootable;
-	/** C/H/S start address */
-	struct partition_chs chs_start;
-	/** System indicator (partition type) */
-	uint8_t type;
-	/** C/H/S end address */
-	struct partition_chs chs_end;
-	/** Linear start address */
-	uint32_t start;
-	/** Linear length */
-	uint32_t length;
-} __attribute__ (( packed ));
-
-/** A Master Boot Record */
-struct master_boot_record {
-	uint8_t pad[446];
-	/** Partition table */
-	struct partition_table_entry partitions[4];
-	/** 0x55aa MBR signature */
-	uint16_t signature;
-} __attribute__ (( packed ));
-
-extern void register_int13_drive ( struct int13_drive *drive );
-extern void unregister_int13_drive ( struct int13_drive *drive );
-extern int int13_boot ( unsigned int drive );
-
-#endif /* INT13_H */