diff options
Diffstat (limited to 'gpxe/src/drivers/bus/pci.c')
-rw-r--r-- | gpxe/src/drivers/bus/pci.c | 341 |
1 files changed, 0 insertions, 341 deletions
diff --git a/gpxe/src/drivers/bus/pci.c b/gpxe/src/drivers/bus/pci.c deleted file mode 100644 index 8899e6e1..00000000 --- a/gpxe/src/drivers/bus/pci.c +++ /dev/null @@ -1,341 +0,0 @@ -/* - * Copyright (C) 2006 Michael Brown <mbrown@fensystems.co.uk>. - * - * Based in part on pci.c from Etherboot 5.4, by Ken Yap and David - * Munro, in turn based on the Linux kernel's PCI implementation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -FILE_LICENCE ( GPL2_OR_LATER ); - -#include <stdint.h> -#include <stdlib.h> -#include <stdio.h> -#include <string.h> -#include <errno.h> -#include <gpxe/tables.h> -#include <gpxe/device.h> -#include <gpxe/pci.h> - -/** @file - * - * PCI bus - * - */ - -static void pcibus_remove ( struct root_device *rootdev ); - -/** - * Read PCI BAR - * - * @v pci PCI device - * @v reg PCI register number - * @ret bar Base address register - * - * Reads the specified PCI base address register, including the flags - * portion. 64-bit BARs will be handled automatically. If the value - * of the 64-bit BAR exceeds the size of an unsigned long (i.e. if the - * high dword is non-zero on a 32-bit platform), then the value - * returned will be zero plus the flags for a 64-bit BAR. Unreachable - * 64-bit BARs are therefore returned as uninitialised 64-bit BARs. - */ -static unsigned long pci_bar ( struct pci_device *pci, unsigned int reg ) { - uint32_t low; - uint32_t high; - - pci_read_config_dword ( pci, reg, &low ); - if ( ( low & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK) ) - == (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64) ){ - pci_read_config_dword ( pci, reg + 4, &high ); - if ( high ) { - if ( sizeof ( unsigned long ) > sizeof ( uint32_t ) ) { - return ( ( ( uint64_t ) high << 32 ) | low ); - } else { - DBG ( "Unhandled 64-bit BAR %08x%08x\n", - high, low ); - return PCI_BASE_ADDRESS_MEM_TYPE_64; - } - } - } - return low; -} - -/** - * Find the start of a PCI BAR - * - * @v pci PCI device - * @v reg PCI register number - * @ret start BAR start address - * - * Reads the specified PCI base address register, and returns the - * address portion of the BAR (i.e. without the flags). - * - * If the address exceeds the size of an unsigned long (i.e. if a - * 64-bit BAR has a non-zero high dword on a 32-bit machine), the - * return value will be zero. - */ -unsigned long pci_bar_start ( struct pci_device *pci, unsigned int reg ) { - unsigned long bar; - - bar = pci_bar ( pci, reg ); - if ( (bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY ){ - return ( bar & PCI_BASE_ADDRESS_MEM_MASK ); - } else { - return ( bar & PCI_BASE_ADDRESS_IO_MASK ); - } -} - -/** - * Read membase and ioaddr for a PCI device - * - * @v pci PCI device - * - * This scans through all PCI BARs on the specified device. The first - * valid memory BAR is recorded as pci_device::membase, and the first - * valid IO BAR is recorded as pci_device::ioaddr. - * - * 64-bit BARs are handled automatically. On a 32-bit platform, if a - * 64-bit BAR has a non-zero high dword, it will be regarded as - * invalid. - */ -static void pci_read_bases ( struct pci_device *pci ) { - unsigned long bar; - int reg; - - for ( reg = PCI_BASE_ADDRESS_0; reg <= PCI_BASE_ADDRESS_5; reg += 4 ) { - bar = pci_bar ( pci, reg ); - if ( bar & PCI_BASE_ADDRESS_SPACE_IO ) { - if ( ! pci->ioaddr ) - pci->ioaddr = - ( bar & PCI_BASE_ADDRESS_IO_MASK ); - } else { - if ( ! pci->membase ) - pci->membase = - ( bar & PCI_BASE_ADDRESS_MEM_MASK ); - /* Skip next BAR if 64-bit */ - if ( bar & PCI_BASE_ADDRESS_MEM_TYPE_64 ) - reg += 4; - } - } -} - -/** - * Enable PCI device - * - * @v pci PCI device - * - * Set device to be a busmaster in case BIOS neglected to do so. Also - * adjust PCI latency timer to a reasonable value, 32. - */ -void adjust_pci_device ( struct pci_device *pci ) { - unsigned short new_command, pci_command; - unsigned char pci_latency; - - pci_read_config_word ( pci, PCI_COMMAND, &pci_command ); - new_command = ( pci_command | PCI_COMMAND_MASTER | - PCI_COMMAND_MEM | PCI_COMMAND_IO ); - if ( pci_command != new_command ) { - DBG ( "PCI BIOS has not enabled device %02x:%02x.%x! " - "Updating PCI command %04x->%04x\n", pci->bus, - PCI_SLOT ( pci->devfn ), PCI_FUNC ( pci->devfn ), - pci_command, new_command ); - pci_write_config_word ( pci, PCI_COMMAND, new_command ); - } - - pci_read_config_byte ( pci, PCI_LATENCY_TIMER, &pci_latency); - if ( pci_latency < 32 ) { - DBG ( "PCI device %02x:%02x.%x latency timer is unreasonably " - "low at %d. Setting to 32.\n", pci->bus, - PCI_SLOT ( pci->devfn ), PCI_FUNC ( pci->devfn ), - pci_latency ); - pci_write_config_byte ( pci, PCI_LATENCY_TIMER, 32); - } -} - -/** - * Probe a PCI device - * - * @v pci PCI device - * @ret rc Return status code - * - * Searches for a driver for the PCI device. If a driver is found, - * its probe() routine is called. - */ -static int pci_probe ( struct pci_device *pci ) { - struct pci_driver *driver; - struct pci_device_id *id; - unsigned int i; - int rc; - - DBG ( "Adding PCI device %02x:%02x.%x (%04x:%04x mem %lx io %lx " - "irq %d)\n", pci->bus, PCI_SLOT ( pci->devfn ), - PCI_FUNC ( pci->devfn ), pci->vendor, pci->device, - pci->membase, pci->ioaddr, pci->irq ); - - for_each_table_entry ( driver, PCI_DRIVERS ) { - for ( i = 0 ; i < driver->id_count ; i++ ) { - id = &driver->ids[i]; - if ( ( id->vendor != PCI_ANY_ID ) && - ( id->vendor != pci->vendor ) ) - continue; - if ( ( id->device != PCI_ANY_ID ) && - ( id->device != pci->device ) ) - continue; - pci->driver = driver; - pci->driver_name = id->name; - DBG ( "...using driver %s\n", pci->driver_name ); - if ( ( rc = driver->probe ( pci, id ) ) != 0 ) { - DBG ( "......probe failed\n" ); - continue; - } - return 0; - } - } - - DBG ( "...no driver found\n" ); - return -ENOTTY; -} - -/** - * Remove a PCI device - * - * @v pci PCI device - */ -static void pci_remove ( struct pci_device *pci ) { - pci->driver->remove ( pci ); - DBG ( "Removed PCI device %02x:%02x.%x\n", pci->bus, - PCI_SLOT ( pci->devfn ), PCI_FUNC ( pci->devfn ) ); -} - -/** - * Probe PCI root bus - * - * @v rootdev PCI bus root device - * - * Scans the PCI bus for devices and registers all devices it can - * find. - */ -static int pcibus_probe ( struct root_device *rootdev ) { - struct pci_device *pci = NULL; - unsigned int max_bus; - unsigned int bus; - unsigned int devfn; - uint8_t hdrtype = 0; - uint32_t tmp; - int rc; - - max_bus = pci_max_bus(); - for ( bus = 0 ; bus <= max_bus ; bus++ ) { - for ( devfn = 0 ; devfn <= 0xff ; devfn++ ) { - - /* Allocate struct pci_device */ - if ( ! pci ) - pci = malloc ( sizeof ( *pci ) ); - if ( ! pci ) { - rc = -ENOMEM; - goto err; - } - memset ( pci, 0, sizeof ( *pci ) ); - pci->bus = bus; - pci->devfn = devfn; - - /* Skip all but the first function on - * non-multifunction cards - */ - if ( PCI_FUNC ( devfn ) == 0 ) { - pci_read_config_byte ( pci, PCI_HEADER_TYPE, - &hdrtype ); - } else if ( ! ( hdrtype & 0x80 ) ) { - continue; - } - - /* Check for physical device presence */ - pci_read_config_dword ( pci, PCI_VENDOR_ID, &tmp ); - if ( ( tmp == 0xffffffff ) || ( tmp == 0 ) ) - continue; - - /* Populate struct pci_device */ - pci->vendor = ( tmp & 0xffff ); - pci->device = ( tmp >> 16 ); - pci_read_config_dword ( pci, PCI_REVISION, &tmp ); - pci->class = ( tmp >> 8 ); - pci_read_config_byte ( pci, PCI_INTERRUPT_LINE, - &pci->irq ); - pci_read_bases ( pci ); - - /* Add to device hierarchy */ - snprintf ( pci->dev.name, sizeof ( pci->dev.name ), - "PCI%02x:%02x.%x", bus, - PCI_SLOT ( devfn ), PCI_FUNC ( devfn ) ); - pci->dev.desc.bus_type = BUS_TYPE_PCI; - pci->dev.desc.location = PCI_BUSDEVFN (bus, devfn); - pci->dev.desc.vendor = pci->vendor; - pci->dev.desc.device = pci->device; - pci->dev.desc.class = pci->class; - pci->dev.desc.ioaddr = pci->ioaddr; - pci->dev.desc.irq = pci->irq; - pci->dev.parent = &rootdev->dev; - list_add ( &pci->dev.siblings, &rootdev->dev.children); - INIT_LIST_HEAD ( &pci->dev.children ); - - /* Look for a driver */ - if ( pci_probe ( pci ) == 0 ) { - /* pcidev registered, we can drop our ref */ - pci = NULL; - } else { - /* Not registered; re-use struct pci_device */ - list_del ( &pci->dev.siblings ); - } - } - } - - free ( pci ); - return 0; - - err: - free ( pci ); - pcibus_remove ( rootdev ); - return rc; -} - -/** - * Remove PCI root bus - * - * @v rootdev PCI bus root device - */ -static void pcibus_remove ( struct root_device *rootdev ) { - struct pci_device *pci; - struct pci_device *tmp; - - list_for_each_entry_safe ( pci, tmp, &rootdev->dev.children, - dev.siblings ) { - pci_remove ( pci ); - list_del ( &pci->dev.siblings ); - free ( pci ); - } -} - -/** PCI bus root device driver */ -static struct root_driver pci_root_driver = { - .probe = pcibus_probe, - .remove = pcibus_remove, -}; - -/** PCI bus root device */ -struct root_device pci_root_device __root_device = { - .dev = { .name = "PCI" }, - .driver = &pci_root_driver, -}; |