diff options
Diffstat (limited to 'gpxe/src/drivers/net/cs89x0.c')
| -rw-r--r-- | gpxe/src/drivers/net/cs89x0.c | 739 |
1 files changed, 0 insertions, 739 deletions
diff --git a/gpxe/src/drivers/net/cs89x0.c b/gpxe/src/drivers/net/cs89x0.c deleted file mode 100644 index df2667d9..00000000 --- a/gpxe/src/drivers/net/cs89x0.c +++ /dev/null @@ -1,739 +0,0 @@ -#ifdef ALLMULTI -#error multicast support is not yet implemented -#endif - -/** - Per an email message from Russ Nelson <nelson@crynwr.com> on - 18 March 2008 this file is now licensed under GPL Version 2. - - From: Russ Nelson <nelson@crynwr.com> - Date: Tue, 18 Mar 2008 12:42:00 -0400 - Subject: Re: [Etherboot-developers] cs89x0 driver in etherboot - -- quote from email - As copyright holder, if I say it doesn't conflict with the GPL, - then it doesn't conflict with the GPL. - - However, there's no point in causing people's brains to overheat, - so yes, I grant permission for the code to be relicensed under the - GPLv2. Please make sure that this change in licensing makes its - way upstream. -russ - -- quote from email -**/ - -FILE_LICENCE ( GPL2_ONLY ); - -/* cs89x0.c: A Crystal Semiconductor CS89[02]0 driver for etherboot. */ -/* - Permission is granted to distribute the enclosed cs89x0.[ch] driver - only in conjunction with the Etherboot package. The code is - ordinarily distributed under the GPL. - - Russ Nelson, January 2000 - - ChangeLog: - - Thu Dec 6 22:40:00 1996 Markus Gutschke <gutschk@math.uni-muenster.de> - - * disabled all "advanced" features; this should make the code more reliable - - * reorganized the reset function - - * always reset the address port, so that autoprobing will continue working - - * some cosmetic changes - - * 2.5 - - Thu Dec 5 21:00:00 1996 Markus Gutschke <gutschk@math.uni-muenster.de> - - * tested the code against a CS8900 card - - * lots of minor bug fixes and adjustments - - * this is the first release, that actually works! it still requires some - changes in order to be more tolerant to different environments - - * 4 - - Fri Nov 22 23:00:00 1996 Markus Gutschke <gutschk@math.uni-muenster.de> - - * read the manuals for the CS89x0 chipsets and took note of all the - changes that will be neccessary in order to adapt Russel Nelson's code - to the requirements of a BOOT-Prom - - * 6 - - Thu Nov 19 22:00:00 1996 Markus Gutschke <gutschk@math.uni-muenster.de> - - * Synched with Russel Nelson's current code (v1.00) - - * 2 - - Thu Nov 12 18:00:00 1996 Markus Gutschke <gutschk@math.uni-muenster.de> - - * Cleaned up some of the code and tried to optimize the code size. - - * 1.5 - - Sun Nov 10 16:30:00 1996 Markus Gutschke <gutschk@math.uni-muenster.de> - - * First experimental release. This code compiles fine, but I - have no way of testing whether it actually works. - - * I did not (yet) bother to make the code 16bit aware, so for - the time being, it will only work for Etherboot/32. - - * 12 - - */ - -#include <errno.h> -#include <gpxe/ethernet.h> -#include "etherboot.h" -#include "nic.h" -#include <gpxe/isa.h> -#include "console.h" -#include "cs89x0.h" - -static unsigned short eth_nic_base; -static unsigned long eth_mem_start; -static unsigned short eth_irqno; -static unsigned short eth_cs_type; /* one of: CS8900, CS8920, CS8920M */ -static unsigned short eth_auto_neg_cnf; -static unsigned short eth_adapter_cnf; -static unsigned short eth_linectl; - -/************************************************************************* - CS89x0 - specific routines -**************************************************************************/ - -static inline int readreg(int portno) -{ - outw(portno, eth_nic_base + ADD_PORT); - return inw(eth_nic_base + DATA_PORT); -} - -static inline void writereg(int portno, int value) -{ - outw(portno, eth_nic_base + ADD_PORT); - outw(value, eth_nic_base + DATA_PORT); - return; -} - -/************************************************************************* -EEPROM access -**************************************************************************/ - -static int wait_eeprom_ready(void) -{ - unsigned long tmo = currticks() + 4*TICKS_PER_SEC; - - /* check to see if the EEPROM is ready, a timeout is used - - just in case EEPROM is ready when SI_BUSY in the - PP_SelfST is clear */ - while(readreg(PP_SelfST) & SI_BUSY) { - if (currticks() >= tmo) - return -1; } - return 0; -} - -static int get_eeprom_data(int off, int len, unsigned short *buffer) -{ - int i; - -#ifdef EDEBUG - printf("\ncs: EEPROM data from %hX for %hX:",off,len); -#endif - for (i = 0; i < len; i++) { - if (wait_eeprom_ready() < 0) - return -1; - /* Now send the EEPROM read command and EEPROM location - to read */ - writereg(PP_EECMD, (off + i) | EEPROM_READ_CMD); - if (wait_eeprom_ready() < 0) - return -1; - buffer[i] = readreg(PP_EEData); -#ifdef EDEBUG - if (!(i%10)) - printf("\ncs: "); - printf("%hX ", buffer[i]); -#endif - } -#ifdef EDEBUG - putchar('\n'); -#endif - - return(0); -} - -static int get_eeprom_chksum(int off __unused, int len, unsigned short *buffer) -{ - int i, cksum; - - cksum = 0; - for (i = 0; i < len; i++) - cksum += buffer[i]; - cksum &= 0xffff; - if (cksum == 0) - return 0; - return -1; -} - -/************************************************************************* -Activate all of the available media and probe for network -**************************************************************************/ - -static void clrline(void) -{ - int i; - - putchar('\r'); - for (i = 79; i--; ) putchar(' '); - printf("\rcs: "); - return; -} - -static void control_dc_dc(int on_not_off) -{ - unsigned int selfcontrol; - unsigned long tmo = currticks() + TICKS_PER_SEC; - - /* control the DC to DC convertor in the SelfControl register. */ - selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */ - if (((eth_adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off) - selfcontrol |= HCB1; - else - selfcontrol &= ~HCB1; - writereg(PP_SelfCTL, selfcontrol); - - /* Wait for the DC/DC converter to power up - 1000ms */ - while (currticks() < tmo); - - return; -} - -static int detect_tp(void) -{ - unsigned long tmo; - - /* Turn on the chip auto detection of 10BT/ AUI */ - - clrline(); printf("attempting %s:","TP"); - - /* If connected to another full duplex capable 10-Base-T card - the link pulses seem to be lost when the auto detect bit in - the LineCTL is set. To overcome this the auto detect bit - will be cleared whilst testing the 10-Base-T interface. - This would not be necessary for the sparrow chip but is - simpler to do it anyway. */ - writereg(PP_LineCTL, eth_linectl &~ AUI_ONLY); - control_dc_dc(0); - - /* Delay for the hardware to work out if the TP cable is - present - 150ms */ - for (tmo = currticks() + 4; currticks() < tmo; ); - - if ((readreg(PP_LineST) & LINK_OK) == 0) - return 0; - - if (eth_cs_type != CS8900) { - - writereg(PP_AutoNegCTL, eth_auto_neg_cnf & AUTO_NEG_MASK); - - if ((eth_auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) { - printf(" negotiating duplex... "); - while (readreg(PP_AutoNegST) & AUTO_NEG_BUSY) { - if (currticks() - tmo > 40*TICKS_PER_SEC) { - printf("time out "); - break; - } - } - } - if (readreg(PP_AutoNegST) & FDX_ACTIVE) - printf("using full duplex"); - else - printf("using half duplex"); - } - - return A_CNF_MEDIA_10B_T; -} - -/* send a test packet - return true if carrier bits are ok */ -static int send_test_pkt(struct nic *nic) -{ - static unsigned char testpacket[] = { 0,0,0,0,0,0, 0,0,0,0,0,0, - 0, 46, /*A 46 in network order */ - 0, 0, /*DSAP=0 & SSAP=0 fields */ - 0xf3,0 /*Control (Test Req+P bit set)*/ }; - unsigned long tmo; - - writereg(PP_LineCTL, readreg(PP_LineCTL) | SERIAL_TX_ON); - - memcpy(testpacket, nic->node_addr, ETH_ALEN); - memcpy(testpacket+ETH_ALEN, nic->node_addr, ETH_ALEN); - - outw(TX_AFTER_ALL, eth_nic_base + TX_CMD_PORT); - outw(ETH_ZLEN, eth_nic_base + TX_LEN_PORT); - - /* Test to see if the chip has allocated memory for the packet */ - for (tmo = currticks() + 2; - (readreg(PP_BusST) & READY_FOR_TX_NOW) == 0; ) - if (currticks() >= tmo) - return(0); - - /* Write the contents of the packet */ - outsw(eth_nic_base + TX_FRAME_PORT, testpacket, - (ETH_ZLEN+1)>>1); - - printf(" sending test packet "); - /* wait a couple of timer ticks for packet to be received */ - for (tmo = currticks() + 2; currticks() < tmo; ); - - if ((readreg(PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) { - printf("succeeded"); - return 1; - } - printf("failed"); - return 0; -} - - -static int detect_aui(struct nic *nic) -{ - clrline(); printf("attempting %s:","AUI"); - control_dc_dc(0); - - writereg(PP_LineCTL, (eth_linectl & ~AUTO_AUI_10BASET) | AUI_ONLY); - - if (send_test_pkt(nic)) { - return A_CNF_MEDIA_AUI; } - else - return 0; -} - -static int detect_bnc(struct nic *nic) -{ - clrline(); printf("attempting %s:","BNC"); - control_dc_dc(1); - - writereg(PP_LineCTL, (eth_linectl & ~AUTO_AUI_10BASET) | AUI_ONLY); - - if (send_test_pkt(nic)) { - return A_CNF_MEDIA_10B_2; } - else - return 0; -} - -/************************************************************************** -ETH_RESET - Reset adapter -***************************************************************************/ - -static void cs89x0_reset(struct nic *nic) -{ - int i; - unsigned long reset_tmo; - - writereg(PP_SelfCTL, readreg(PP_SelfCTL) | POWER_ON_RESET); - - /* wait for two ticks; that is 2*55ms */ - for (reset_tmo = currticks() + 2; currticks() < reset_tmo; ); - - if (eth_cs_type != CS8900) { - /* Hardware problem requires PNP registers to be reconfigured - after a reset */ - if (eth_irqno != 0xFFFF) { - outw(PP_CS8920_ISAINT, eth_nic_base + ADD_PORT); - outb(eth_irqno, eth_nic_base + DATA_PORT); - outb(0, eth_nic_base + DATA_PORT + 1); } - - if (eth_mem_start) { - outw(PP_CS8920_ISAMemB, eth_nic_base + ADD_PORT); - outb((eth_mem_start >> 8) & 0xff, eth_nic_base + DATA_PORT); - outb((eth_mem_start >> 24) & 0xff, eth_nic_base + DATA_PORT + 1); } } - - /* Wait until the chip is reset */ - for (reset_tmo = currticks() + 2; - (readreg(PP_SelfST) & INIT_DONE) == 0 && - currticks() < reset_tmo; ); - - /* disable interrupts and memory accesses */ - writereg(PP_BusCTL, 0); - - /* set the ethernet address */ - for (i=0; i < ETH_ALEN/2; i++) - writereg(PP_IA+i*2, - nic->node_addr[i*2] | - (nic->node_addr[i*2+1] << 8)); - - /* receive only error free packets addressed to this card */ - writereg(PP_RxCTL, DEF_RX_ACCEPT); - - /* do not generate any interrupts on receive operations */ - writereg(PP_RxCFG, 0); - - /* do not generate any interrupts on transmit operations */ - writereg(PP_TxCFG, 0); - - /* do not generate any interrupts on buffer operations */ - writereg(PP_BufCFG, 0); - - /* reset address port, so that autoprobing will keep working */ - outw(PP_ChipID, eth_nic_base + ADD_PORT); - - return; -} - -/************************************************************************** -ETH_TRANSMIT - Transmit a frame -***************************************************************************/ - -static void cs89x0_transmit( - struct nic *nic, - const char *d, /* Destination */ - unsigned int t, /* Type */ - unsigned int s, /* size */ - const char *p) /* Packet */ -{ - unsigned long tmo; - int sr; - - /* does this size have to be rounded??? please, - somebody have a look in the specs */ - if ((sr = ((s + ETH_HLEN + 1)&~1)) < ETH_ZLEN) - sr = ETH_ZLEN; - -retry: - /* initiate a transmit sequence */ - outw(TX_AFTER_ALL, eth_nic_base + TX_CMD_PORT); - outw(sr, eth_nic_base + TX_LEN_PORT); - - /* Test to see if the chip has allocated memory for the packet */ - if ((readreg(PP_BusST) & READY_FOR_TX_NOW) == 0) { - /* Oops... this should not happen! */ - printf("cs: unable to send packet; retrying...\n"); - for (tmo = currticks() + 5*TICKS_PER_SEC; currticks() < tmo; ); - cs89x0_reset(nic); - goto retry; } - - /* Write the contents of the packet */ - outsw(eth_nic_base + TX_FRAME_PORT, d, ETH_ALEN/2); - outsw(eth_nic_base + TX_FRAME_PORT, nic->node_addr, - ETH_ALEN/2); - outw(((t >> 8)&0xFF)|(t << 8), eth_nic_base + TX_FRAME_PORT); - outsw(eth_nic_base + TX_FRAME_PORT, p, (s+1)/2); - for (sr = sr/2 - (s+1)/2 - ETH_ALEN - 1; sr > 0; sr--) - outw(0, eth_nic_base + TX_FRAME_PORT); - - /* wait for transfer to succeed */ - for (tmo = currticks()+5*TICKS_PER_SEC; - (s = readreg(PP_TxEvent)&~0x1F) == 0 && currticks() < tmo;) - /* nothing */ ; - if ((s & TX_SEND_OK_BITS) != TX_OK) { - printf("\ntransmission error %#hX\n", s); - } - - return; -} - -/************************************************************************** -ETH_POLL - Wait for a frame -***************************************************************************/ - -static int cs89x0_poll(struct nic *nic, int retrieve) -{ - int status; - - status = readreg(PP_RxEvent); - - if ((status & RX_OK) == 0) - return(0); - - if ( ! retrieve ) return 1; - - status = inw(eth_nic_base + RX_FRAME_PORT); - nic->packetlen = inw(eth_nic_base + RX_FRAME_PORT); - insw(eth_nic_base + RX_FRAME_PORT, nic->packet, nic->packetlen >> 1); - if (nic->packetlen & 1) - nic->packet[nic->packetlen-1] = inw(eth_nic_base + RX_FRAME_PORT); - return 1; -} - -static void cs89x0_irq(struct nic *nic __unused, irq_action_t action __unused) -{ - switch ( action ) { - case DISABLE : - break; - case ENABLE : - break; - case FORCE : - break; - } -} - -static struct nic_operations cs89x0_operations = { - .connect = dummy_connect, - .poll = cs89x0_poll, - .transmit = cs89x0_transmit, - .irq = cs89x0_irq, -}; - -/************************************************************************** -ETH_PROBE - Look for an adapter -***************************************************************************/ - -static int cs89x0_probe_addr ( isa_probe_addr_t ioaddr ) { - /* if they give us an odd I/O address, then do ONE write to - the address port, to get it back to address zero, where we - expect to find the EISA signature word. */ - if (ioaddr & 1) { - ioaddr &= ~1; - if ((inw(ioaddr + ADD_PORT) & ADD_MASK) != ADD_SIG) - return 0; - outw(PP_ChipID, ioaddr + ADD_PORT); - } - - if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) - return 0; - - return 1; -} - -static int cs89x0_probe ( struct nic *nic, struct isa_device *isa __unused ) { - int i, result = -1; - unsigned rev_type = 0, isa_cnf, cs_revision; - unsigned short eeprom_buff[CHKSUM_LEN]; - - nic->ioaddr &= ~1; /* LSB = 1 indicates a more aggressive probe */ - eth_nic_base = nic->ioaddr; - - /* get the chip type */ - rev_type = readreg(PRODUCT_ID_ADD); - eth_cs_type = rev_type &~ REVISON_BITS; - cs_revision = ((rev_type & REVISON_BITS) >> 8) + 'A'; - - printf("\ncs: cs89%c0%s rev %c, base %#hX", - eth_cs_type==CS8900?'0':'2', - eth_cs_type==CS8920M?"M":"", - cs_revision, - eth_nic_base); -#ifndef EMBEDDED - /* First check to see if an EEPROM is attached*/ - if ((readreg(PP_SelfST) & EEPROM_PRESENT) == 0) { - printf("\ncs: no EEPROM...\n"); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - return 0; - } else if (get_eeprom_data(START_EEPROM_DATA,CHKSUM_LEN, - eeprom_buff) < 0) { - printf("\ncs: EEPROM read failed...\n"); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - return 0; - } else if (get_eeprom_chksum(START_EEPROM_DATA,CHKSUM_LEN, - eeprom_buff) < 0) { - printf("\ncs: EEPROM checksum bad...\n"); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - return 0; - } - - /* get transmission control word but keep the - autonegotiation bits */ - eth_auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2]; - /* Store adapter configuration */ - eth_adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2]; - /* Store ISA configuration */ - isa_cnf = eeprom_buff[ISA_CNF_OFFSET/2]; - - /* store the initial memory base address */ - eth_mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8; - - printf("%s%s%s, addr ", - (eth_adapter_cnf & A_CNF_10B_T)?", RJ-45":"", - (eth_adapter_cnf & A_CNF_AUI)?", AUI":"", - (eth_adapter_cnf & A_CNF_10B_2)?", BNC":""); - - /* If this is a CS8900 then no pnp soft */ - if (eth_cs_type != CS8900 && - /* Check if the ISA IRQ has been set */ - (i = readreg(PP_CS8920_ISAINT) & 0xff, - (i != 0 && i < CS8920_NO_INTS))) - eth_irqno = i; - else { - i = isa_cnf & INT_NO_MASK; - if (eth_cs_type == CS8900) { - /* the table that follows is dependent - upon how you wired up your cs8900 - in your system. The table is the - same as the cs8900 engineering demo - board. irq_map also depends on the - contents of the table. Also see - write_irq, which is the reverse - mapping of the table below. */ - if (i < 4) i = "\012\013\014\005"[i]; - else printf("\ncs: BUG: isa_config is %d\n", i); } - eth_irqno = i; } - - nic->irqno = eth_irqno; - - /* Retrieve and print the ethernet address. */ - for (i=0; i<ETH_ALEN; i++) { - nic->node_addr[i] = ((unsigned char *)eeprom_buff)[i]; - } - - DBG ( "%s\n", eth_ntoa ( nic->node_addr ) ); - -#endif -#ifdef EMBEDDED - /* Retrieve and print the ethernet address. */ - { - unsigned char MAC_HW_ADDR[6]={MAC_HW_ADDR_DRV}; - memcpy(nic->node_addr, MAC_HW_ADDR, 6); - } - - DBG ( "%s\n", eth_ntoa ( nic->node_addr ) ); - - eth_adapter_cnf = A_CNF_10B_T | A_CNF_MEDIA_10B_T; - eth_auto_neg_cnf = EE_AUTO_NEG_ENABLE | IMM_BIT; -#endif -#ifndef EMBEDDED - /* Set the LineCTL quintuplet based on adapter - configuration read from EEPROM */ - if ((eth_adapter_cnf & A_CNF_EXTND_10B_2) && - (eth_adapter_cnf & A_CNF_LOW_RX_SQUELCH)) - eth_linectl = LOW_RX_SQUELCH; - else - eth_linectl = 0; - - /* check to make sure that they have the "right" - hardware available */ - switch(eth_adapter_cnf & A_CNF_MEDIA_TYPE) { - case A_CNF_MEDIA_10B_T: result = eth_adapter_cnf & A_CNF_10B_T; - break; - case A_CNF_MEDIA_AUI: result = eth_adapter_cnf & A_CNF_AUI; - break; - case A_CNF_MEDIA_10B_2: result = eth_adapter_cnf & A_CNF_10B_2; - break; - default: result = eth_adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | - A_CNF_10B_2); - } - if (!result) { - printf("cs: EEPROM is configured for unavailable media\n"); - error: - writereg(PP_LineCTL, readreg(PP_LineCTL) & - ~(SERIAL_TX_ON | SERIAL_RX_ON)); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - return 0; - } -#endif - /* Initialize the card for probing of the attached media */ - cs89x0_reset(nic); - - /* set the hardware to the configured choice */ - switch(eth_adapter_cnf & A_CNF_MEDIA_TYPE) { - case A_CNF_MEDIA_10B_T: - result = detect_tp(); - if (!result) { - clrline(); - printf("10Base-T (RJ-45%s", - ") has no cable\n"); } - /* check "ignore missing media" bit */ - if (eth_auto_neg_cnf & IMM_BIT) - /* Yes! I don't care if I see a link pulse */ - result = A_CNF_MEDIA_10B_T; - break; - case A_CNF_MEDIA_AUI: - result = detect_aui(nic); - if (!result) { - clrline(); - printf("10Base-5 (AUI%s", - ") has no cable\n"); } - /* check "ignore missing media" bit */ - if (eth_auto_neg_cnf & IMM_BIT) - /* Yes! I don't care if I see a carrrier */ - result = A_CNF_MEDIA_AUI; - break; - case A_CNF_MEDIA_10B_2: - result = detect_bnc(nic); - if (!result) { - clrline(); - printf("10Base-2 (BNC%s", - ") has no cable\n"); } - /* check "ignore missing media" bit */ - if (eth_auto_neg_cnf & IMM_BIT) - /* Yes! I don't care if I can xmit a packet */ - result = A_CNF_MEDIA_10B_2; - break; - case A_CNF_MEDIA_AUTO: - writereg(PP_LineCTL, eth_linectl | AUTO_AUI_10BASET); - if (eth_adapter_cnf & A_CNF_10B_T) - if ((result = detect_tp()) != 0) - break; - if (eth_adapter_cnf & A_CNF_AUI) - if ((result = detect_aui(nic)) != 0) - break; - if (eth_adapter_cnf & A_CNF_10B_2) - if ((result = detect_bnc(nic)) != 0) - break; - clrline(); printf("no media detected\n"); - goto error; - } - clrline(); - switch(result) { - case 0: printf("no network cable attached to configured media\n"); - goto error; - case A_CNF_MEDIA_10B_T: printf("using 10Base-T (RJ-45)\n"); - break; - case A_CNF_MEDIA_AUI: printf("using 10Base-5 (AUI)\n"); - break; - case A_CNF_MEDIA_10B_2: printf("using 10Base-2 (BNC)\n"); - break; - } - - /* Turn on both receive and transmit operations */ - writereg(PP_LineCTL, readreg(PP_LineCTL) | SERIAL_RX_ON | - SERIAL_TX_ON); - - return 0; -#ifdef EMBEDDED - error: - writereg(PP_LineCTL, readreg(PP_LineCTL) & - ~(SERIAL_TX_ON | SERIAL_RX_ON)); - outw(PP_ChipID, eth_nic_base + ADD_PORT); - return 0; -#endif - - nic->nic_op = &cs89x0_operations; - return 1; -} - -static void cs89x0_disable ( struct nic *nic, - struct isa_device *isa __unused ) { - cs89x0_reset(nic); -} - -static isa_probe_addr_t cs89x0_probe_addrs[] = { -#ifndef EMBEDDED - /* use "conservative" default values for autoprobing */ - 0x300, 0x320, 0x340, 0x200, 0x220, 0x240, - 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, - /* if that did not work, then be more aggressive */ - 0x301, 0x321, 0x341, 0x201, 0x221, 0x241, - 0x261, 0x281, 0x2a1, 0x2c1, 0x2e1, -#else - 0x01000300, -#endif -}; - -ISA_DRIVER ( cs89x0_driver, cs89x0_probe_addrs, cs89x0_probe_addr, - ISAPNP_VENDOR('C','S','C'), 0x0007 ); - -DRIVER ( "cs89x0", nic_driver, isa_driver, cs89x0_driver, - cs89x0_probe, cs89x0_disable ); - -ISA_ROM ( "cs89x0", "Crystal Semiconductor CS89x0" ); - -/* - * Local variables: - * c-basic-offset: 8 - * c-indent-level: 8 - * tab-width: 8 - * End: - */ |