summaryrefslogtreecommitdiff
path: root/gpxe/src/drivers/net/p80211hdr.h
diff options
context:
space:
mode:
Diffstat (limited to 'gpxe/src/drivers/net/p80211hdr.h')
-rw-r--r--gpxe/src/drivers/net/p80211hdr.h301
1 files changed, 0 insertions, 301 deletions
diff --git a/gpxe/src/drivers/net/p80211hdr.h b/gpxe/src/drivers/net/p80211hdr.h
deleted file mode 100644
index 83546712..00000000
--- a/gpxe/src/drivers/net/p80211hdr.h
+++ /dev/null
@@ -1,301 +0,0 @@
-/* src/include/wlan/p80211hdr.h
-*
-* Macros, types, and functions for handling 802.11 MAC headers
-*
-* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
-* --------------------------------------------------------------------
-*
-* linux-wlan
-*
-* The contents of this file are subject to the Mozilla Public
-* License Version 1.1 (the "License"); you may not use this file
-* except in compliance with the License. You may obtain a copy of
-* the License at http://www.mozilla.org/MPL/
-*
-* Software distributed under the License is distributed on an "AS
-* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-* implied. See the License for the specific language governing
-* rights and limitations under the License.
-*
-* Alternatively, the contents of this file may be used under the
-* terms of the GNU Public License version 2 (the "GPL"), in which
-* case the provisions of the GPL are applicable instead of the
-* above. If you wish to allow the use of your version of this file
-* only under the terms of the GPL and not to allow others to use
-* your version of this file under the MPL, indicate your decision
-* by deleting the provisions above and replace them with the notice
-* and other provisions required by the GPL. If you do not delete
-* the provisions above, a recipient may use your version of this
-* file under either the MPL or the GPL.
-*
-* --------------------------------------------------------------------
-*
-* Inquiries regarding the linux-wlan Open Source project can be
-* made directly to:
-*
-* AbsoluteValue Systems Inc.
-* info@linux-wlan.com
-* http://www.linux-wlan.com
-*
-* --------------------------------------------------------------------
-*
-* Portions of the development of this software were funded by
-* Intersil Corporation as part of PRISM(R) chipset product development.
-*
-* --------------------------------------------------------------------
-*
-* This file declares the constants and types used in the interface
-* between a wlan driver and the user mode utilities.
-*
-* Note:
-* - Constant values are always in HOST byte order. To assign
-* values to multi-byte fields they _must_ be converted to
-* ieee byte order. To retrieve multi-byte values from incoming
-* frames, they must be converted to host order.
-*
-* All functions declared here are implemented in p80211.c
-* --------------------------------------------------------------------
-*/
-
-FILE_LICENCE ( GPL2_ONLY );
-
-#ifndef _P80211HDR_H
-#define _P80211HDR_H
-
-/*================================================================*/
-/* System Includes */
-
-/*================================================================*/
-/* Project Includes */
-
-#ifndef _WLAN_COMPAT_H
-#include <wlan/wlan_compat.h>
-#endif
-
-
-/*================================================================*/
-/* Constants */
-
-/*--- Sizes -----------------------------------------------*/
-#define WLAN_ADDR_LEN 6
-#define WLAN_CRC_LEN 4
-#define WLAN_BSSID_LEN 6
-#define WLAN_BSS_TS_LEN 8
-#define WLAN_HDR_A3_LEN 24
-#define WLAN_HDR_A4_LEN 30
-#define WLAN_SSID_MAXLEN 32
-#define WLAN_DATA_MAXLEN 2312
-#define WLAN_A3FR_MAXLEN (WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)
-#define WLAN_A4FR_MAXLEN (WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)
-#define WLAN_BEACON_FR_MAXLEN (WLAN_HDR_A3_LEN + 334)
-#define WLAN_ATIM_FR_MAXLEN (WLAN_HDR_A3_LEN + 0)
-#define WLAN_DISASSOC_FR_MAXLEN (WLAN_HDR_A3_LEN + 2)
-#define WLAN_ASSOCREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 48)
-#define WLAN_ASSOCRESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 16)
-#define WLAN_REASSOCREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 54)
-#define WLAN_REASSOCRESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 16)
-#define WLAN_PROBEREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 44)
-#define WLAN_PROBERESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 78)
-#define WLAN_AUTHEN_FR_MAXLEN (WLAN_HDR_A3_LEN + 261)
-#define WLAN_DEAUTHEN_FR_MAXLEN (WLAN_HDR_A3_LEN + 2)
-#define WLAN_WEP_NKEYS 4
-#define WLAN_WEP_MAXKEYLEN 13
-#define WLAN_CHALLENGE_IE_LEN 130
-#define WLAN_CHALLENGE_LEN 128
-#define WLAN_WEP_IV_LEN 4
-#define WLAN_WEP_ICV_LEN 4
-
-/*--- Frame Control Field -------------------------------------*/
-/* Frame Types */
-#define WLAN_FTYPE_MGMT 0x00
-#define WLAN_FTYPE_CTL 0x01
-#define WLAN_FTYPE_DATA 0x02
-
-/* Frame subtypes */
-/* Management */
-#define WLAN_FSTYPE_ASSOCREQ 0x00
-#define WLAN_FSTYPE_ASSOCRESP 0x01
-#define WLAN_FSTYPE_REASSOCREQ 0x02
-#define WLAN_FSTYPE_REASSOCRESP 0x03
-#define WLAN_FSTYPE_PROBEREQ 0x04
-#define WLAN_FSTYPE_PROBERESP 0x05
-#define WLAN_FSTYPE_BEACON 0x08
-#define WLAN_FSTYPE_ATIM 0x09
-#define WLAN_FSTYPE_DISASSOC 0x0a
-#define WLAN_FSTYPE_AUTHEN 0x0b
-#define WLAN_FSTYPE_DEAUTHEN 0x0c
-
-/* Control */
-#define WLAN_FSTYPE_BLOCKACKREQ 0x8
-#define WLAN_FSTYPE_BLOCKACK 0x9
-#define WLAN_FSTYPE_PSPOLL 0x0a
-#define WLAN_FSTYPE_RTS 0x0b
-#define WLAN_FSTYPE_CTS 0x0c
-#define WLAN_FSTYPE_ACK 0x0d
-#define WLAN_FSTYPE_CFEND 0x0e
-#define WLAN_FSTYPE_CFENDCFACK 0x0f
-
-/* Data */
-#define WLAN_FSTYPE_DATAONLY 0x00
-#define WLAN_FSTYPE_DATA_CFACK 0x01
-#define WLAN_FSTYPE_DATA_CFPOLL 0x02
-#define WLAN_FSTYPE_DATA_CFACK_CFPOLL 0x03
-#define WLAN_FSTYPE_NULL 0x04
-#define WLAN_FSTYPE_CFACK 0x05
-#define WLAN_FSTYPE_CFPOLL 0x06
-#define WLAN_FSTYPE_CFACK_CFPOLL 0x07
-
-
-/*================================================================*/
-/* Macros */
-
-/*--- FC Macros ----------------------------------------------*/
-/* Macros to get/set the bitfields of the Frame Control Field */
-/* GET_FC_??? - takes the host byte-order value of an FC */
-/* and retrieves the value of one of the */
-/* bitfields and moves that value so its lsb is */
-/* in bit 0. */
-/* SET_FC_??? - takes a host order value for one of the FC */
-/* bitfields and moves it to the proper bit */
-/* location for ORing into a host order FC. */
-/* To send the FC produced from SET_FC_???, */
-/* one must put the bytes in IEEE order. */
-/* e.g. */
-/* printf("the frame subtype is %x", */
-/* GET_FC_FTYPE( ieee2host( rx.fc ))) */
-/* */
-/* tx.fc = host2ieee( SET_FC_FTYPE(WLAN_FTYP_CTL) | */
-/* SET_FC_FSTYPE(WLAN_FSTYPE_RTS) ); */
-/*------------------------------------------------------------*/
-
-#define WLAN_GET_FC_PVER(n) (((UINT16)(n)) & (BIT0 | BIT1))
-#define WLAN_GET_FC_FTYPE(n) ((((UINT16)(n)) & (BIT2 | BIT3)) >> 2)
-#define WLAN_GET_FC_FSTYPE(n) ((((UINT16)(n)) & (BIT4|BIT5|BIT6|BIT7)) >> 4)
-#define WLAN_GET_FC_TODS(n) ((((UINT16)(n)) & (BIT8)) >> 8)
-#define WLAN_GET_FC_FROMDS(n) ((((UINT16)(n)) & (BIT9)) >> 9)
-#define WLAN_GET_FC_MOREFRAG(n) ((((UINT16)(n)) & (BIT10)) >> 10)
-#define WLAN_GET_FC_RETRY(n) ((((UINT16)(n)) & (BIT11)) >> 11)
-#define WLAN_GET_FC_PWRMGT(n) ((((UINT16)(n)) & (BIT12)) >> 12)
-#define WLAN_GET_FC_MOREDATA(n) ((((UINT16)(n)) & (BIT13)) >> 13)
-#define WLAN_GET_FC_ISWEP(n) ((((UINT16)(n)) & (BIT14)) >> 14)
-#define WLAN_GET_FC_ORDER(n) ((((UINT16)(n)) & (BIT15)) >> 15)
-
-#define WLAN_SET_FC_PVER(n) ((UINT16)(n))
-#define WLAN_SET_FC_FTYPE(n) (((UINT16)(n)) << 2)
-#define WLAN_SET_FC_FSTYPE(n) (((UINT16)(n)) << 4)
-#define WLAN_SET_FC_TODS(n) (((UINT16)(n)) << 8)
-#define WLAN_SET_FC_FROMDS(n) (((UINT16)(n)) << 9)
-#define WLAN_SET_FC_MOREFRAG(n) (((UINT16)(n)) << 10)
-#define WLAN_SET_FC_RETRY(n) (((UINT16)(n)) << 11)
-#define WLAN_SET_FC_PWRMGT(n) (((UINT16)(n)) << 12)
-#define WLAN_SET_FC_MOREDATA(n) (((UINT16)(n)) << 13)
-#define WLAN_SET_FC_ISWEP(n) (((UINT16)(n)) << 14)
-#define WLAN_SET_FC_ORDER(n) (((UINT16)(n)) << 15)
-
-/*--- Duration Macros ----------------------------------------*/
-/* Macros to get/set the bitfields of the Duration Field */
-/* - the duration value is only valid when bit15 is zero */
-/* - the firmware handles these values, so I'm not going */
-/* these macros right now. */
-/*------------------------------------------------------------*/
-
-/*--- Sequence Control Macros -------------------------------*/
-/* Macros to get/set the bitfields of the Sequence Control */
-/* Field. */
-/*------------------------------------------------------------*/
-#define WLAN_GET_SEQ_FRGNUM(n) (((UINT16)(n)) & (BIT0|BIT1|BIT2|BIT3))
-#define WLAN_GET_SEQ_SEQNUM(n) ((((UINT16)(n)) & (~(BIT0|BIT1|BIT2|BIT3))) >> 4)
-
-/*--- Data ptr macro -----------------------------------------*/
-/* Creates a UINT8* to the data portion of a frame */
-/* Assumes you're passing in a ptr to the beginning of the hdr*/
-/*------------------------------------------------------------*/
-#define WLAN_HDR_A3_DATAP(p) (((UINT8*)(p)) + WLAN_HDR_A3_LEN)
-#define WLAN_HDR_A4_DATAP(p) (((UINT8*)(p)) + WLAN_HDR_A4_LEN)
-
-#define DOT11_RATE5_ISBASIC_GET(r) (((UINT8)(r)) & BIT7)
-
-/*================================================================*/
-/* Types */
-
-/* BSS Timestamp */
-typedef UINT8 wlan_bss_ts_t[WLAN_BSS_TS_LEN];
-
-/* Generic 802.11 Header types */
-
-typedef struct p80211_hdr_a3
-{
- UINT16 fc;
- UINT16 dur;
- UINT8 a1[WLAN_ADDR_LEN];
- UINT8 a2[WLAN_ADDR_LEN];
- UINT8 a3[WLAN_ADDR_LEN];
- UINT16 seq;
-} __WLAN_ATTRIB_PACK__ p80211_hdr_a3_t;
-
-typedef struct p80211_hdr_a4
-{
- UINT16 fc;
- UINT16 dur;
- UINT8 a1[WLAN_ADDR_LEN];
- UINT8 a2[WLAN_ADDR_LEN];
- UINT8 a3[WLAN_ADDR_LEN];
- UINT16 seq;
- UINT8 a4[WLAN_ADDR_LEN];
-} __WLAN_ATTRIB_PACK__ p80211_hdr_a4_t;
-
-typedef union p80211_hdr
-{
- p80211_hdr_a3_t a3;
- p80211_hdr_a4_t a4;
-} __WLAN_ATTRIB_PACK__ p80211_hdr_t;
-
-
-/*================================================================*/
-/* Extern Declarations */
-
-
-/*================================================================*/
-/* Function Declarations */
-
-/* Frame and header lenght macros */
-
-#define WLAN_CTL_FRAMELEN(fstype) (\
- (fstype) == WLAN_FSTYPE_BLOCKACKREQ ? 24 : \
- (fstype) == WLAN_FSTYPE_BLOCKACK ? 152 : \
- (fstype) == WLAN_FSTYPE_PSPOLL ? 20 : \
- (fstype) == WLAN_FSTYPE_RTS ? 20 : \
- (fstype) == WLAN_FSTYPE_CTS ? 14 : \
- (fstype) == WLAN_FSTYPE_ACK ? 14 : \
- (fstype) == WLAN_FSTYPE_CFEND ? 20 : \
- (fstype) == WLAN_FSTYPE_CFENDCFACK ? 20 : 4)
-
-#define WLAN_FCS_LEN 4
-
-/* ftcl in HOST order */
-inline static UINT16 p80211_headerlen(UINT16 fctl)
-{
- UINT16 hdrlen = 0;
-
- switch ( WLAN_GET_FC_FTYPE(fctl) ) {
- case WLAN_FTYPE_MGMT:
- hdrlen = WLAN_HDR_A3_LEN;
- break;
- case WLAN_FTYPE_DATA:
- hdrlen = WLAN_HDR_A3_LEN;
- if ( WLAN_GET_FC_TODS(fctl) && WLAN_GET_FC_FROMDS(fctl) ) {
- hdrlen += WLAN_ADDR_LEN;
- }
- break;
- case WLAN_FTYPE_CTL:
- hdrlen = WLAN_CTL_FRAMELEN(WLAN_GET_FC_FSTYPE(fctl)) -
- WLAN_FCS_LEN;
- break;
- default:
- hdrlen = WLAN_HDR_A3_LEN;
- }
-
- return hdrlen;
-}
-
-#endif /* _P80211HDR_H */