summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@konsulko.com>2020-06-16 19:06:10 -0400
committerTom Rini <trini@konsulko.com>2020-06-26 10:29:05 -0400
commit11af95a02a7649e2c59da63b1fbee73539fcb974 (patch)
tree5d0ddcb87d43db8e7da85840e775533029c43195
parentb120665fe9616707d16c0df19ace659fbe1fd0dd (diff)
downloadu-boot-11af95a02a7649e2c59da63b1fbee73539fcb974.tar.gz
Convert CONFIG_BAUDRATE to Kconfig
This converts the following to Kconfig: CONFIG_BAUDRATE Signed-off-by: Tom Rini <trini@konsulko.com>
-rw-r--r--README5
-rw-r--r--include/configs/apalis-imx8.h3
-rw-r--r--include/configs/bcm_northstar2.h1
-rw-r--r--include/configs/bcmstb.h1
-rw-r--r--include/configs/colibri-imx8x.h3
-rw-r--r--include/configs/controlcenterdc.h2
-rw-r--r--include/configs/dh_imx6.h1
-rw-r--r--include/configs/display5.h1
-rw-r--r--include/configs/grpeach.h3
-rw-r--r--include/configs/imx8mq_evk.h2
-rw-r--r--include/configs/imx8qm_mek.h3
-rw-r--r--include/configs/imx8qm_rom7720.h3
-rw-r--r--include/configs/imx8qxp_mek.h3
-rw-r--r--include/configs/ls1021atsn.h2
-rw-r--r--include/configs/ls1028a_common.h1
-rw-r--r--include/configs/ls1088a_common.h1
-rw-r--r--include/configs/lx2160a_common.h1
-rw-r--r--include/configs/mx53ppd.h1
-rw-r--r--include/configs/mx6memcal.h1
-rw-r--r--include/configs/mx7ulp_evk.h1
-rw-r--r--include/configs/owl-common.h3
-rw-r--r--include/configs/pdu001.h1
-rw-r--r--include/configs/pico-imx8mq.h2
-rw-r--r--include/configs/presidio_asic.h1
-rw-r--r--include/configs/rk3128_common.h1
-rw-r--r--include/configs/rk3368_common.h1
-rw-r--r--include/configs/wb50n.h2
27 files changed, 0 insertions, 50 deletions
diff --git a/README b/README
index 4367ac3798..a5aee86211 100644
--- a/README
+++ b/README
@@ -670,11 +670,6 @@ The following options need to be configured:
Define this variable to enable hw flow control in serial driver.
Current user of this option is drivers/serial/nsl16550.c driver
-- Console Baudrate:
- CONFIG_BAUDRATE - in bps
- Select one of the baudrates listed in
- CONFIG_SYS_BAUDRATE_TABLE, see below.
-
- Autoboot Command:
CONFIG_BOOTCOMMAND
Only needed when CONFIG_BOOTDELAY is enabled;
diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index 08d34db106..6dad8216e9 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -103,9 +103,6 @@
#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
#define PHYS_SDRAM_2_SIZE SZ_2G /* 2 GB */
-/* Serial */
-#define CONFIG_BAUDRATE 115200
-
/* Monitor Command Prompt */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/bcm_northstar2.h b/include/configs/bcm_northstar2.h
index 45dc7b29c9..fbfab288b3 100644
--- a/include/configs/bcm_northstar2.h
+++ b/include/configs/bcm_northstar2.h
@@ -31,7 +31,6 @@
#define CONFIG_SYS_NS16550_COM2 0x66110000
#define CONFIG_SYS_NS16550_COM3 0x66120000
#define CONFIG_SYS_NS16550_COM4 0x66130000
-#define CONFIG_BAUDRATE 115200
/* console configuration */
#define CONFIG_SYS_CBSIZE SZ_1K
diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h
index 24569f7d94..01cfed0b86 100644
--- a/include/configs/bcmstb.h
+++ b/include/configs/bcmstb.h
@@ -115,7 +115,6 @@ extern phys_addr_t prior_stage_fdt_address;
/*
* Serial console configuration.
*/
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
115200}
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 7d007071e5..8d7222902c 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -135,9 +135,6 @@
#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
-/* Serial */
-#define CONFIG_BAUDRATE 115200
-
/* Monitor Command Prompt */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index 00e5c8f794..0c36ea6610 100644
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -112,8 +112,6 @@
*/
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_HOSTNAME "ccdc"
#define CONFIG_ROOTPATH "/opt/nfsroot"
#define CONFIG_BOOTFILE "ccdc.img"
diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 5bfdf4044b..0b6617fa82 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -62,7 +62,6 @@
/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_BAUDRATE 115200
/* USB Configs */
#ifdef CONFIG_CMD_USB
diff --git a/include/configs/display5.h b/include/configs/display5.h
index 3348ecc7c7..94baa65610 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -66,7 +66,6 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#ifndef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \
diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h
index 001e9d385b..bde168d475 100644
--- a/include/configs/grpeach.h
+++ b/include/configs/grpeach.h
@@ -11,9 +11,6 @@
/* Board Clock , P1 clock frequency (XTAL=13.33MHz) */
#define CONFIG_SYS_CLK_FREQ 66666666
-/* Serial Console */
-#define CONFIG_BAUDRATE 115200
-
/* Miscellaneous */
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_CMDLINE_TAG
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index f71efd45ab..33a3014095 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -175,8 +175,6 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index 8324767eb5..fd68c4f052 100644
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -175,9 +175,6 @@
#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */
#define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */
-/* Serial */
-#define CONFIG_BAUDRATE 115200
-
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 8000000 /* 8MHz */
diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h
index 89d7adabea..9808e72474 100644
--- a/include/configs/imx8qm_rom7720.h
+++ b/include/configs/imx8qm_rom7720.h
@@ -163,9 +163,6 @@
/* LPDDR4 board total DDR is 6GB, DDR4 board total DDR is 4 GB */
#define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */
-/* Serial */
-#define CONFIG_BAUDRATE 115200
-
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 8000000 /* 8MHz */
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index a58f68c17e..b442b48bec 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -175,9 +175,6 @@
/* LPDDR4 board total DDR is 3GB */
#define PHYS_SDRAM_2_SIZE 0x40000000 /* 1 GB */
-/* Serial */
-#define CONFIG_BAUDRATE 115200
-
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 8000000 /* 8MHz */
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 46c60aaf5c..ec2ed7c609 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -104,8 +104,6 @@
#endif
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
-#define CONFIG_BAUDRATE 115200
-
/* I2C */
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index f9040e661d..44f2dc8f9b 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -48,7 +48,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* Miscellaneous configurable options */
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 596f14bf3e..3ea16752de 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -64,7 +64,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS)
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 5ab924457e..a8636d398e 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -78,7 +78,6 @@
(void *)CONFIG_SYS_SERIAL1, \
(void *)CONFIG_SYS_SERIAL2, \
(void *)CONFIG_SYS_SERIAL3 }
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* MC firmware */
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index bb6d82d327..2ee66612c2 100644
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -33,7 +33,6 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
/* Command definition */
diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h
index b774b167f6..0a28d61703 100644
--- a/include/configs/mx6memcal.h
+++ b/include/configs/mx6memcal.h
@@ -27,7 +27,6 @@
#else
#error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx)
#endif
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16)
diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
index 942b7dd414..5e05b8c166 100644
--- a/include/configs/mx7ulp_evk.h
+++ b/include/configs/mx7ulp_evk.h
@@ -39,7 +39,6 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_CACHELINE_SIZE 64
diff --git a/include/configs/owl-common.h b/include/configs/owl-common.h
index f77a5fa4c1..98b5a96cf6 100644
--- a/include/configs/owl-common.h
+++ b/include/configs/owl-common.h
@@ -29,9 +29,6 @@
*/
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x7ff00)
-/* UART Definitions */
-#define CONFIG_BAUDRATE 115200
-
/* Console configuration */
#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
#define CONFIG_SYS_MAXARGS 64
diff --git a/include/configs/pdu001.h b/include/configs/pdu001.h
index d524f3cbcf..e4b14c5ecd 100644
--- a/include/configs/pdu001.h
+++ b/include/configs/pdu001.h
@@ -73,6 +73,5 @@
#define CONFIG_SYS_NS16550_COM4 UART3_BASE
#define CONFIG_SYS_NS16550_COM5 UART4_BASE
#define CONFIG_SYS_NS16550_COM6 UART5_BASE
-#define CONFIG_BAUDRATE 115200
#endif /* ! __CONFIG_PDU001_H */
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 2ae13b30ee..7b7d633f28 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -150,8 +150,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
(PHYS_SDRAM_SIZE >> 1))
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h
index 51177f44fe..34235b5a00 100644
--- a/include/configs/presidio_asic.h
+++ b/include/configs/presidio_asic.h
@@ -41,7 +41,6 @@
#define CORTINA_SERIAL_PORTS {(void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1}
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_SERIAL0 PER_UART0_CFG
#define CONFIG_SYS_SERIAL1 PER_UART1_CFG
diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h
index d0c9e5c809..8f1d508b8c 100644
--- a/include/configs/rk3128_common.h
+++ b/include/configs/rk3128_common.h
@@ -9,7 +9,6 @@
#include "rockchip-common.h"
#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h
index e57d0efa7f..f178a06945 100644
--- a/include/configs/rk3368_common.h
+++ b/include/configs/rk3368_common.h
@@ -15,7 +15,6 @@
#define CONFIG_SYS_SDRAM_BASE 0
#define SDRAM_MAX_SIZE 0xff000000
-#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/wb50n.h b/include/configs/wb50n.h
index c2112763a2..a210449dae 100644
--- a/include/configs/wb50n.h
+++ b/include/configs/wb50n.h
@@ -72,8 +72,6 @@
#define CONFIG_BOOTARGS \
"rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
-#define CONFIG_BAUDRATE 115200
-
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE \