omap3: zoom1: switch to generic ti_omap3_common config header

ti_omap3_common contains a lot of common header definitions that help
reduce the size of the zoom1 config file. So, use the generic header
and customize as needed for the platform (example: no spl).

Signed-off-by: Nishanth Menon <nm@ti.com>

2 files changed, 16 insertions, 109 deletions

diff --git a/board/logicpd/zoom1/config.mk b/board/logicpd/zoom1/config.mk
index f5a19edd8f..c7ebfd9e69 100644
--- a/board/logicpd/zoom1/config.mk
+++ b/board/logicpd/zoom1/config.mk
@@ -14,4 +14,3 @@
 # (mem base + reserved)
 
 # For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 4f933d9d7e..7c5540ff66 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -16,16 +16,22 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3_ZOOM1	1	/* working with Zoom MDK Rev1 */
-#define CONFIG_OMAP_COMMON
 #define CONFIG_SYS_GENERIC_BOARD
 
-#define CONFIG_SDRC	/* The chip has SDRC controller */
-
+#define CONFIG_NAND
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap3.h>
+#include <configs/ti_omap3_common.h>
+
+/* Remove SPL boot option - we do not support that on LDP yet */
+#undef CONFIG_SPL
+#undef CONFIG_SPL_FRAMEWORK
+#undef CONFIG_SPL_OS_BOOT
+
+/* Generic NAND definition conflicts with debug_base */
+#undef CONFIG_SYS_NAND_BASE
 
 /*
  * Display CPU and Board information
@@ -33,58 +39,16 @@
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
 
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
 #define CONFIG_REVISION_TAG		1
 
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_CMD_BOOTZ		1
-
-/*
- * Size of malloc() pool
- */
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 
 /*
  * Hardware drivers
  */
 
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3	/* UART3 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
-					115200}
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
-
 /* USB */
 #define CONFIG_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1
@@ -100,23 +64,14 @@
 #define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME	"Zoom1"
 
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_FS_GENERIC	/* Generic FS support */
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
 					"1920k(u-boot),128k(u-boot-env),"\
 					"4m(kernel),-(fs)"
 
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
-#define CONFIG_CMD_NAND		/* NAND support			*/
+#if defined(CONFIG_CMD_NAND)
 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
+#endif
 
 #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
 #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
@@ -127,32 +82,24 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#undef CONFIG_SYS_I2C_OMAP24XX
 #define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_POWER		1
 #define CONFIG_TWL4030_LED		1
 
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
-							/* devices */
 
 /* Environment information */
-#define CONFIG_BOOTDELAY		10
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
@@ -205,50 +152,13 @@
 		"fi; " \
 	"else run nandboot; fi"
 
-#define CONFIG_AUTO_COMPLETE		1
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT		"OMAP3 Zoom1 # "
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
-								/* works on */
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1)	/* memtest */
+#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_2 + \
 					0x01F00000) /* 31MB */
 
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
-							/* load address */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
-#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
@@ -259,8 +169,6 @@
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
 
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
-
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE
 #endif