summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2016-01-29 09:14:54 +0100
committerStefan Roese <sr@denx.de>2016-04-04 11:22:10 +0200
commit606576d54b673119d956cf4b9b24b098c1c05196 (patch)
tree76b77d3af530e0161b2c782719648c606801143b
parent09e89ab4af01c551246b3d08f8b31a24ee035ae8 (diff)
downloadu-boot-606576d54b673119d956cf4b9b24b098c1c05196.tar.gz
arm: mvebu: Add basic support for Armada 375 eval board db-88f6720
This patch adds basic support for the Marvell A375 eval board. Tested are the following interfaces: - I2C - SPI - SPI NOR - Ethernet (mvpp2), port 0 & 1 Currently the A375 SerDes and DDR3 init code is not intergrated. So the SPL U-Boot is not fully functional. Right now, this A375 mainline U-Boot can only be used by chainloading it via the original Marvell U-Boot. This can be done via this command: => tftpboot 00800000 a375/u-boot-dtb.bin;go 00800000 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/armada-375-db.dts216
-rw-r--r--arch/arm/dts/armada-375.dtsi658
-rw-r--r--arch/arm/mach-mvebu/Kconfig12
-rw-r--r--board/Marvell/db-88f6720/MAINTAINERS6
-rw-r--r--board/Marvell/db-88f6720/Makefile7
-rw-r--r--board/Marvell/db-88f6720/db-88f6720.c91
-rw-r--r--board/Marvell/db-88f6720/kwbimage.cfg12
-rw-r--r--configs/db-88f6720_defconfig28
-rw-r--r--include/configs/db-88f6720.h120
11 files changed, 1151 insertions, 2 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bf5e18aba2..f18dbe683c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -115,7 +115,7 @@ config KIRKWOOD
select CPU_ARM926EJS
config ARCH_MVEBU
- bool "Marvell MVEBU family (Armada XP/38x)"
+ bool "Marvell MVEBU family (Armada XP/375/38x)"
select CPU_V7
select SUPPORT_SPL
select OF_CONTROL
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0da9e3bfd1..01cf030d3f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -49,6 +49,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra210-p2571.dtb
dtb-$(CONFIG_ARCH_MVEBU) += \
+ armada-375-db.dtb \
armada-388-clearfog.dtb \
armada-388-gp.dtb \
armada-xp-gp.dtb \
diff --git a/arch/arm/dts/armada-375-db.dts b/arch/arm/dts/armada-375-db.dts
new file mode 100644
index 0000000000..343349b8fd
--- /dev/null
+++ b/arch/arm/dts/armada-375-db.dts
@@ -0,0 +1,216 @@
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+ model = "Marvell Armada 375 Development Board";
+ compatible = "marvell,a375-db", "marvell,armada375";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ /* So that mvebu u-boot can update the MAC addresses */
+ ethernet0 = &eth0;
+ ethernet1 = &eth1;
+ spi0 = &spi0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1 GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
+
+ internal-regs {
+ spi@10600 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ /*
+ * SPI conflicts with NAND, so we disable it
+ * here, and select NAND as the enabled device
+ * by default.
+ */
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ spi-flash@0 {
+ u-boot,dm-pre-reloc;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ };
+
+ i2c@11100 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ };
+
+ serial@12000 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ };
+
+ pinctrl {
+ sdio_st_pins: sdio-st-pins {
+ marvell,pins = "mpp44", "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+
+ sata@a0000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ nand: nand@d0000 {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+
+ usb@54000 {
+ status = "okay";
+ };
+
+ usb3@58000 {
+ status = "okay";
+ };
+
+ mvsdio@d4000 {
+ pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+
+ ethernet@f0000 {
+ status = "okay";
+
+ eth0@c4000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ eth1@c5000 {
+ status = "okay";
+ phy = <&phy3>;
+ phy-mode = "gmii";
+ };
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/armada-375.dtsi b/arch/arm/dts/armada-375.dtsi
new file mode 100644
index 0000000000..249c41c757
--- /dev/null
+++ b/arch/arm/dts/armada-375.dtsi
@@ -0,0 +1,658 @@
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+ model = "Marvell Armada 375 family SoC";
+ compatible = "marvell,armada375";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ clocks {
+ /* 2 GHz fixed main PLL */
+ mainpll: mainpll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+ /* 25 MHz reference crystal */
+ refclk: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "marvell,armada-375-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts-extended = <&mpic 3>;
+ };
+
+ soc {
+ compatible = "marvell,armada375-mbus", "simple-bus";
+ u-boot,dm-pre-reloc;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ interrupt-parent = <&gic>;
+ pcie-mem-aperture = <0xe0000000 0x8000000>;
+ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+ };
+
+ devbus-bootcs {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs0 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs1 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs2 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs3 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ internal-regs {
+ compatible = "simple-bus";
+ u-boot,dm-pre-reloc;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ L2: cache-controller@8000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x8000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ arm,double-linefill-incr = <1>;
+ arm,double-linefill-wrap = <0>;
+ arm,double-linefill = <1>;
+ prefetch-data = <1>;
+ };
+
+ scu@c000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xc000 0x58>;
+ };
+
+ timer@c600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xc600 0x20>;
+ interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+ clocks = <&coreclk 2>;
+ };
+
+ gic: interrupt-controller@d000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ interrupt-controller;
+ reg = <0xd000 0x1000>,
+ <0xc100 0x100>;
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0xc0054 0x4>;
+ clocks = <&gateclk 19>;
+ };
+
+ /* Network controller */
+ ethernet@f0000 {
+ compatible = "marvell,armada-375-pp2";
+ reg = <0xf0000 0xa000>, /* Packet Processor regs */
+ <0xc0000 0x3060>, /* LMS regs */
+ <0xc4000 0x100>, /* eth0 regs */
+ <0xc5000 0x100>; /* eth1 regs */
+ clocks = <&gateclk 3>, <&gateclk 19>;
+ clock-names = "pp_clk", "gop_clk";
+ status = "disabled";
+
+ eth0: eth0@c4000 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ status = "disabled";
+ };
+
+ eth1: eth1@c5000 {
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ status = "disabled";
+ };
+ };
+
+ rtc@10300 {
+ compatible = "marvell,orion-rtc";
+ reg = <0x10300 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ spi0: spi@10600 {
+ compatible = "marvell,armada-375-spi",
+ "marvell,orion-spi";
+ reg = <0x10600 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ spi1: spi@10680 {
+ compatible = "marvell,armada-375-spi",
+ "marvell,orion-spi";
+ reg = <0x10680 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11100 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ uart0: serial@12000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ uart1: serial@12100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ pinctrl {
+ compatible = "marvell,mv88f6720-pinctrl";
+ reg = <0x18000 0x24>;
+
+ i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp14", "mpp15";
+ marvell,function = "i2c0";
+ };
+
+ i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp61", "mpp62";
+ marvell,function = "i2c1";
+ };
+
+ nand_pins: nand-pins {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11",
+ "mpp12", "mpp13";
+ marvell,function = "nand";
+ };
+
+ sdio_pins: sdio-pins {
+ marvell,pins = "mpp24", "mpp25", "mpp26",
+ "mpp27", "mpp28", "mpp29";
+ marvell,function = "sd";
+ };
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp0", "mpp1", "mpp4",
+ "mpp5", "mpp8", "mpp9";
+ marvell,function = "spi0";
+ };
+ };
+
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18100 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18140 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpio2: gpio@18180 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18180 0x40>;
+ ngpios = <3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ system-controller@18200 {
+ compatible = "marvell,armada-375-system-controller";
+ reg = <0x18200 0x100>;
+ };
+
+ gateclk: clock-gating-control@18220 {
+ compatible = "marvell,armada-375-gating-clock";
+ reg = <0x18220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
+ };
+
+ usbcluster: usb-cluster@18400 {
+ compatible = "marvell,armada-375-usb-cluster";
+ reg = <0x18400 0x4>;
+ #phy-cells = <1>;
+ };
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ mpic: interrupt-controller@20a00 {
+ compatible = "marvell,mpic";
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@20300 {
+ compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+ reg = <0x20300 0x30>, <0x21040 0x30>;
+ interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <&mpic 5>,
+ <&mpic 6>;
+ clocks = <&coreclk 0>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+ };
+
+ watchdog@20300 {
+ compatible = "marvell,armada-375-wdt";
+ reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
+ clocks = <&coreclk 0>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+ };
+
+ cpurst@20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x10>;
+ };
+
+ coherency-fabric@21010 {
+ compatible = "marvell,armada-375-coherency-fabric";
+ reg = <0x21010 0x1c>;
+ };
+
+ usb@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x500>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 18>;
+ phys = <&usbcluster PHY_TYPE_USB2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb@54000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x54000 0x500>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 26>;
+ status = "disabled";
+ };
+
+ usb3@58000 {
+ compatible = "marvell,armada-375-xhci";
+ reg = <0x58000 0x20000>,<0x5b880 0x80>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 16>;
+ phys = <&usbcluster PHY_TYPE_USB3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ xor@60800 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60800 0x100
+ 0x60A00 0x100>;
+ clocks = <&gateclk 22>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ xor@60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ clocks = <&gateclk 23>;
+ status = "okay";
+
+ xor10 {
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor11 {
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ crypto@90000 {
+ compatible = "marvell,armada-375-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 30>, <&gateclk 31>,
+ <&gateclk 28>, <&gateclk 29>;
+ clock-names = "cesa0", "cesa1",
+ "cesaz0", "cesaz1";
+ marvell,crypto-srams = <&crypto_sram0>,
+ <&crypto_sram1>;
+ marvell,crypto-sram-size = <0x800>;
+ };
+
+ sata@a0000 {
+ compatible = "marvell,orion-sata";
+ reg = <0xa0000 0x5000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 14>, <&gateclk 20>;
+ clock-names = "0", "1";
+ status = "disabled";
+ };
+
+ nand@d0000 {
+ compatible = "marvell,armada370-nand";
+ reg = <0xd0000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 11>;
+ status = "disabled";
+ };
+
+ mvsdio@d4000 {
+ compatible = "marvell,orion-sdio";
+ reg = <0xd4000 0x200>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 17>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
+
+ thermal@e8078 {
+ compatible = "marvell,armada375-thermal";
+ reg = <0xe8078 0x4>, <0xe807c 0x8>;
+ status = "okay";
+ };
+
+ coreclk: mvebu-sar@e8204 {
+ compatible = "marvell,armada-375-core-clock";
+ reg = <0xe8204 0x04>;
+ #clock-cells = <1>;
+ };
+
+ coredivclk: corediv-clock@e8250 {
+ compatible = "marvell,armada-375-corediv-clock";
+ reg = <0xe8250 0xc>;
+ #clock-cells = <1>;
+ clocks = <&mainpll>;
+ clock-output-names = "nand";
+ };
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-370-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ };
+
+ crypto_sram0: sa-sram0 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+ clocks = <&gateclk 30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+ };
+
+ crypto_sram1: sa-sram1 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+ clocks = <&gateclk 31>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+ };
+ };
+};
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 96a33133ae..220886aa59 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,5 +1,8 @@
if ARCH_MVEBU
+config ARMADA_375
+ bool
+
config ARMADA_38X
bool
@@ -23,13 +26,17 @@ config DB_88F6820_GP
select ARMADA_38X
choice
- prompt "Marvell MVEBU (Armada XP/38x) board select"
+ prompt "Marvell MVEBU (Armada XP/375/38x) board select"
optional
config TARGET_CLEARFOG
bool "Support ClearFog"
select DB_88F6820_GP
+config TARGET_DB_88F6720
+ bool "Support DB-88F6720 Armada 375"
+ select ARMADA_375
+
config TARGET_DB_88F6820_GP
bool "Support DB-88F6820-GP"
select DB_88F6820_GP
@@ -54,6 +61,7 @@ endchoice
config SYS_BOARD
default "clearfog" if TARGET_CLEARFOG
+ default "db-88f6720" if TARGET_DB_88F6720
default "db-88f6820-gp" if TARGET_DB_88F6820_GP
default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
default "ds414" if TARGET_DS414
@@ -62,6 +70,7 @@ config SYS_BOARD
config SYS_CONFIG_NAME
default "clearfog" if TARGET_CLEARFOG
+ default "db-88f6720" if TARGET_DB_88F6720
default "db-88f6820-gp" if TARGET_DB_88F6820_GP
default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
default "ds414" if TARGET_DS414
@@ -70,6 +79,7 @@ config SYS_CONFIG_NAME
config SYS_VENDOR
default "Marvell" if TARGET_DB_MV784MP_GP
+ default "Marvell" if TARGET_DB_88F6720
default "Marvell" if TARGET_DB_88F6820_GP
default "solidrun" if TARGET_CLEARFOG
default "Synology" if TARGET_DS414
diff --git a/board/Marvell/db-88f6720/MAINTAINERS b/board/Marvell/db-88f6720/MAINTAINERS
new file mode 100644
index 0000000000..a27d1c2d64
--- /dev/null
+++ b/board/Marvell/db-88f6720/MAINTAINERS
@@ -0,0 +1,6 @@
+DB_88F6720 BOARD
+M: Stefan Roese <sr@denx.de>
+S: Maintained
+F: board/Marvell/db-88f6720/
+F: include/configs/db-88f6720.h
+F: configs/db-88f6720_defconfig
diff --git a/board/Marvell/db-88f6720/Makefile b/board/Marvell/db-88f6720/Makefile
new file mode 100644
index 0000000000..7a5b51260d
--- /dev/null
+++ b/board/Marvell/db-88f6720/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2016 Stefan Roese <sr@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := db-88f6720.o
diff --git a/board/Marvell/db-88f6720/db-88f6720.c b/board/Marvell/db-88f6720/db-88f6720.c
new file mode 100644
index 0000000000..b6e00f35dd
--- /dev/null
+++ b/board/Marvell/db-88f6720/db-88f6720.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Those values and defines are taken from the Marvell U-Boot version
+ * "u-boot-2013.01-2014_T2.0" for the board Armada 375 DB-88F6720
+ */
+#define DB_88F6720_MPP0_7 0x00020020 /* SPI */
+#define DB_88F6720_MPP8_15 0x22000022 /* SPI , I2C */
+#define DB_88F6720_MPP16_23 0x22222222 /* UART, TDM*/
+#define DB_88F6720_MPP24_31 0x33333333 /* SDIO, SPI1*/
+#define DB_88F6720_MPP32_39 0x04403330 /* SPI1, External SMI */
+#define DB_88F6720_MPP40_47 0x22002044 /* UART1, GE0, SATA0 LED */
+#define DB_88F6720_MPP48_55 0x22222222 /* GE0 */
+#define DB_88F6720_MPP56_63 0x04444422 /* GE0 , LED_MATRIX, GPIO */
+#define DB_88F6720_MPP64_67 0x014 /* LED_MATRIX, SATA1 LED*/
+
+#define DB_88F6720_GPP_OUT_ENA_LOW 0xFFFFFFFF
+#define DB_88F6720_GPP_OUT_ENA_MID 0x7FFFFFFF
+#define DB_88F6720_GPP_OUT_ENA_HIGH 0xFFFFFFFF
+#define DB_88F6720_GPP_OUT_VAL_LOW 0x0
+#define DB_88F6720_GPP_OUT_VAL_MID BIT(31) /* SATA Power output enable */
+#define DB_88F6720_GPP_OUT_VAL_HIGH 0x0
+#define DB_88F6720_GPP_POL_LOW 0x0
+#define DB_88F6720_GPP_POL_MID 0x0
+#define DB_88F6720_GPP_POL_HIGH 0x0
+
+int board_early_init_f(void)
+{
+ /* Configure MPP */
+ writel(DB_88F6720_MPP0_7, MVEBU_MPP_BASE + 0x00);
+ writel(DB_88F6720_MPP8_15, MVEBU_MPP_BASE + 0x04);
+ writel(DB_88F6720_MPP16_23, MVEBU_MPP_BASE + 0x08);
+ writel(DB_88F6720_MPP24_31, MVEBU_MPP_BASE + 0x0c);
+ writel(DB_88F6720_MPP32_39, MVEBU_MPP_BASE + 0x10);
+ writel(DB_88F6720_MPP40_47, MVEBU_MPP_BASE + 0x14);
+ writel(DB_88F6720_MPP48_55, MVEBU_MPP_BASE + 0x18);
+ writel(DB_88F6720_MPP56_63, MVEBU_MPP_BASE + 0x1c);
+ writel(DB_88F6720_MPP64_67, MVEBU_MPP_BASE + 0x20);
+
+ /* Configure GPIO */
+ /* Set GPP Out value */
+ writel(DB_88F6720_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
+ writel(DB_88F6720_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
+ writel(DB_88F6720_GPP_OUT_VAL_HIGH, MVEBU_GPIO2_BASE + 0x00);
+
+ /* Set GPP Polarity */
+ writel(DB_88F6720_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
+ writel(DB_88F6720_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
+ writel(DB_88F6720_GPP_POL_HIGH, MVEBU_GPIO2_BASE + 0x0c);
+
+ /* Set GPP Out Enable */
+ writel(DB_88F6720_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
+ writel(DB_88F6720_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
+ writel(DB_88F6720_GPP_OUT_ENA_HIGH, MVEBU_GPIO2_BASE + 0x04);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Marvell DB-88F6720\n");
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ cpu_eth_init(bis); /* Built in controller(s) come first */
+ return pci_eth_init(bis);
+}
diff --git a/board/Marvell/db-88f6720/kwbimage.cfg b/board/Marvell/db-88f6720/kwbimage.cfg
new file mode 100644
index 0000000000..1f748db37c
--- /dev/null
+++ b/board/Marvell/db-88f6720/kwbimage.cfg
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2014 Stefan Roese <sr@denx.de>
+#
+
+# Armada XP uses version 1 image format
+VERSION 1
+
+# Boot Media configurations
+BOOT_FROM spi
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068
diff --git a/configs/db-88f6720_defconfig b/configs/db-88f6720_defconfig
new file mode 100644
index 0000000000..75bc1f0a9e
--- /dev/null
+++ b/configs/db-88f6720_defconfig
@@ -0,0 +1,28 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_DB_88F6720=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-375-db"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_MISC=y
+CONFIG_NAND_PXA3XX=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_MVPP2=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xf1012000
+CONFIG_DEBUG_UART_CLOCK=250000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h
new file mode 100644
index 0000000000..7f19334cc0
--- /dev/null
+++ b/include/configs/db-88f6720.h
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CONFIG_DB_88F6720_H
+#define _CONFIG_DB_88F6720_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/*
+ * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
+ * for DDR ECC byte filling in the SPL before loading the main
+ * U-Boot into it.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x00800000
+#define CONFIG_SYS_TCLK 200000000 /* 200MHz */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_TFTPPUT
+#define CONFIG_CMD_TIME
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
+#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
+#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* USB/EHCI configuration */
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+
+/* SPI NOR flash default params, used by sf commands */
+#define CONFIG_SF_DEFAULT_SPEED 1000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+
+/* Environment in SPI NOR flash */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
+#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
+#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
+
+#define CONFIG_PHY_MARVELL /* there is a marvell phy */
+#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
+#define CONFIG_SYS_ALT_MEMTEST
+
+/* Additional FS support/configuration */
+#define CONFIG_SUPPORT_VFAT
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * Memory layout while starting into the bin_hdr via the
+ * BootROM:
+ *
+ * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
+ * 0x4000.4030 bin_hdr start address
+ * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
+ * 0x4007.fffc BootROM stack top
+ *
+ * The address space between 0x4007.fffc and 0x400f.fff is not locked in
+ * L2 cache thus cannot be used.
+ */
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x40004030
+#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
+
+#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
+#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+
+/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
+
+#endif /* _CONFIG_DB_88F6720_H */