summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorChuanhua Han <chuanhua.han@nxp.com>2019-07-26 19:24:01 +0800
committerPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>2019-08-22 09:07:36 +0530
commit885ae0513a3cfc2e1fbd4452cd2e2c466423049a (patch)
treeceae491c7a173aa19457de6aa5f95eca8193bb91
parentdb07c447caacd5f9003a57ef2802afa8a4c81348 (diff)
downloadu-boot-885ae0513a3cfc2e1fbd4452cd2e2c466423049a.tar.gz
boards: ls2088aqds: Add support of I2C driver model.
Update ls2088aqds board init code to support DM_I2C. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
-rw-r--r--board/freescale/ls2080aqds/eth.c151
-rw-r--r--board/freescale/ls2080aqds/ls2080aqds.c14
-rw-r--r--include/configs/ls2080aqds.h3
3 files changed, 121 insertions, 47 deletions
diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index 1b4e6c65fb..6a8788c312 100644
--- a/board/freescale/ls2080aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -90,11 +90,16 @@ struct ls2080a_qds_mdio {
struct mii_dev *realbus;
};
+struct reg_pair {
+ uint addr;
+ u8 *val;
+};
+
static void sgmii_configure_repeater(int serdes_port)
{
struct mii_dev *bus;
uint8_t a = 0xf;
- int i, j, ret;
+ int i, j, k, ret;
int dpmac_id = 0, dpmac, mii_bus = 0;
unsigned short value;
char dev[2][20] = {"LS2080A_QDS_MDIO0", "LS2080A_QDS_MDIO3"};
@@ -105,10 +110,30 @@ static void sgmii_configure_repeater(int serdes_port)
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+ u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
+ struct reg_pair reg_pair[10] = {
+ {6, &reg_val[0]}, {4, &reg_val[1]},
+ {8, &reg_val[2]}, {0xf, NULL},
+ {0x11, NULL}, {0x16, NULL},
+ {0x18, NULL}, {0x23, &reg_val[3]},
+ {0x2d, &reg_val[4]}, {4, &reg_val[5]},
+ };
+
int *riser_phy_addr = &xqsgii_riser_phy_addr[0];
+#ifdef CONFIG_DM_I2C
+ struct udevice *udev;
+#endif
/* Set I2c to Slot 1 */
- i2c_write(0x77, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+ ret = i2c_write(0x77, 0, 0, &a, 1);
+#else
+ ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
+ if (!ret)
+ ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+ if (ret)
+ goto error;
for (dpmac = 0; dpmac < 8; dpmac++) {
/* Check the PHY status */
@@ -121,7 +146,15 @@ static void sgmii_configure_repeater(int serdes_port)
mii_bus = 1;
dpmac_id = dpmac + 9;
a = 0xb;
- i2c_write(0x76, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+ ret = i2c_write(0x76, 0, 0, &a, 1);
+#else
+ ret = i2c_get_chip_for_busnum(0, 0x76, 1, &udev);
+ if (!ret)
+ ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+ if (ret)
+ goto error;
break;
}
@@ -154,29 +187,29 @@ static void sgmii_configure_repeater(int serdes_port)
for (i = 0; i < 4; i++) {
for (j = 0; j < 4; j++) {
- a = 0x18;
- i2c_write(i2c_addr[dpmac], 6, 1, &a, 1);
- a = 0x38;
- i2c_write(i2c_addr[dpmac], 4, 1, &a, 1);
- a = 0x4;
- i2c_write(i2c_addr[dpmac], 8, 1, &a, 1);
-
- i2c_write(i2c_addr[dpmac], 0xf, 1,
- &ch_a_eq[i], 1);
- i2c_write(i2c_addr[dpmac], 0x11, 1,
- &ch_a_ctl2[j], 1);
-
- i2c_write(i2c_addr[dpmac], 0x16, 1,
- &ch_b_eq[i], 1);
- i2c_write(i2c_addr[dpmac], 0x18, 1,
- &ch_b_ctl2[j], 1);
-
- a = 0x14;
- i2c_write(i2c_addr[dpmac], 0x23, 1, &a, 1);
- a = 0xb5;
- i2c_write(i2c_addr[dpmac], 0x2d, 1, &a, 1);
- a = 0x20;
- i2c_write(i2c_addr[dpmac], 4, 1, &a, 1);
+ reg_pair[3].val = &ch_a_eq[i];
+ reg_pair[4].val = &ch_a_ctl2[j];
+ reg_pair[5].val = &ch_b_eq[i];
+ reg_pair[6].val = &ch_b_ctl2[j];
+
+ for (k = 0; k < 10; k++) {
+#ifndef CONFIG_DM_I2C
+ ret = i2c_write(i2c_addr[dpmac],
+ reg_pair[k].addr,
+ 1, reg_pair[k].val, 1);
+#else
+ ret = i2c_get_chip_for_busnum(0,
+ i2c_addr[dpmac],
+ 1, &udev);
+ if (!ret)
+ ret = dm_i2c_write(udev,
+ reg_pair[k].addr,
+ reg_pair[k].val, 1);
+#endif
+ if (ret)
+ goto error;
+ }
+
mdelay(100);
ret = miiphy_read(dev[mii_bus],
riser_phy_addr[dpmac],
@@ -217,7 +250,7 @@ error:
static void qsgmii_configure_repeater(int dpmac)
{
uint8_t a = 0xf;
- int i, j;
+ int i, j, k;
int i2c_phy_addr = 0;
int phy_addr = 0;
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
@@ -227,12 +260,32 @@ static void qsgmii_configure_repeater(int dpmac)
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
+ u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
+ struct reg_pair reg_pair[10] = {
+ {6, &reg_val[0]}, {4, &reg_val[1]},
+ {8, &reg_val[2]}, {0xf, NULL},
+ {0x11, NULL}, {0x16, NULL},
+ {0x18, NULL}, {0x23, &reg_val[3]},
+ {0x2d, &reg_val[4]}, {4, &reg_val[5]},
+ };
+
const char *dev = "LS2080A_QDS_MDIO0";
int ret = 0;
unsigned short value;
+#ifdef CONFIG_DM_I2C
+ struct udevice *udev;
+#endif
/* Set I2c to Slot 1 */
- i2c_write(0x77, 0, 0, &a, 1);
+#ifndef CONFIG_DM_I2C
+ ret = i2c_write(0x77, 0, 0, &a, 1);
+#else
+ ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
+ if (!ret)
+ ret = dm_i2c_write(udev, 0, &a, 1);
+#endif
+ if (ret)
+ goto error;
switch (dpmac) {
case 1:
@@ -283,25 +336,29 @@ static void qsgmii_configure_repeater(int dpmac)
for (i = 0; i < 4; i++) {
for (j = 0; j < 4; j++) {
- a = 0x18;
- i2c_write(i2c_phy_addr, 6, 1, &a, 1);
- a = 0x38;
- i2c_write(i2c_phy_addr, 4, 1, &a, 1);
- a = 0x4;
- i2c_write(i2c_phy_addr, 8, 1, &a, 1);
-
- i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
- i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
-
- i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
- i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
-
- a = 0x14;
- i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
- a = 0xb5;
- i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
- a = 0x20;
- i2c_write(i2c_phy_addr, 4, 1, &a, 1);
+ reg_pair[3].val = &ch_a_eq[i];
+ reg_pair[4].val = &ch_a_ctl2[j];
+ reg_pair[5].val = &ch_b_eq[i];
+ reg_pair[6].val = &ch_b_ctl2[j];
+
+ for (k = 0; k < 10; k++) {
+#ifndef CONFIG_DM_I2C
+ ret = i2c_write(i2c_phy_addr,
+ reg_pair[k].addr,
+ 1, reg_pair[k].val, 1);
+#else
+ ret = i2c_get_chip_for_busnum(0,
+ i2c_phy_addr,
+ 1, &udev);
+ if (!ret)
+ ret = dm_i2c_write(udev,
+ reg_pair[k].addr,
+ reg_pair[k].val, 1);
+#endif
+ if (ret)
+ goto error;
+ }
+
mdelay(100);
ret = miiphy_read(dev, phy_addr, 0x11, &value);
if (ret > 0)
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index dc239cf35c..91c80353ed 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -161,8 +161,16 @@ unsigned long get_board_ddr_clk(void)
int select_i2c_ch_pca9547(u8 ch)
{
int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+ ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev);
+ if (!ret)
+ ret = dm_i2c_write(dev, 0, &ch, 1);
+
+#else
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
@@ -225,9 +233,15 @@ int board_init(void)
gd->env_addr = (ulong)&default_environment[0];
#endif
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
+#ifdef CONFIG_DM_I2C
+ rtc_enable_32khz_output(0, CONFIG_SYS_I2C_RTC_ADDR);
+#else
rtc_enable_32khz_output();
#endif
+#endif
+
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 81af1d9ea4..e2a897557d 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -16,7 +16,9 @@ unsigned long get_board_ddr_clk(void);
#ifdef CONFIG_FSL_QSPI
#define CONFIG_QIXIS_I2C_ACCESS
+#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C_EARLY_INIT
+#endif
#define CONFIG_SYS_I2C_IFDR_DIV 0x7e
#endif
@@ -324,6 +326,7 @@ unsigned long get_board_ddr_clk(void);
*/
#define RTC
#define CONFIG_RTC_DS3231 1
+#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT