powerpc/mpc85xx: drop eSDHC periperhal clock code

The below patch added eSDHC periperhal clock code initially.
2d9ca2c mmc: fsl_esdhc: Add peripheral clock support

The purpose was to fix up device tree properties "peripheral-frequency"
so that linux could get the periperhal clock by it.
However the implementation on both u-boot and linux was only
for a Freescale SDK release. The linux part implementation had never
been upstreamed. These code should not have been exist on u-boot
mainline.

Let's remove the powerpc part changes but keep the changes in
fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized
to support SD UHS and eMMC HS200/HS400 speed modes for current
Layerscape ARM platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>

6 files changed, 1 insertions, 61 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 15b05fcc51..0c5252edc2 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -69,8 +69,7 @@ void get_sys_info(sys_info_t *sys_info)
 		[14] = 4,	/* CC4 PPL / 4 */
 	};
 	uint i, freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
-#if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV) || \
-	defined(CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK)
+#if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV)
 	uint rcw_tmp;
 #endif
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
@@ -450,48 +449,6 @@ void get_sys_info(sys_info_t *sys_info)
 #endif
 #endif
 
-#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
-#if defined(CONFIG_ARCH_T2080)
-#define ESDHC_CLK_SEL	0x00000007
-#define ESDHC_CLK_SHIFT	0
-#define ESDHC_CLK_RCWSR	15
-#else	/* Support T1040 T1024 by now */
-#define ESDHC_CLK_SEL	0xe0000000
-#define ESDHC_CLK_SHIFT	29
-#define ESDHC_CLK_RCWSR	7
-#endif
-	rcw_tmp = in_be32(&gur->rcwsr[ESDHC_CLK_RCWSR]);
-	switch ((rcw_tmp & ESDHC_CLK_SEL) >> ESDHC_CLK_SHIFT) {
-	case 1:
-		sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK];
-		break;
-	case 2:
-		sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 2;
-		break;
-	case 3:
-		sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 3;
-		break;
-#if defined(CONFIG_SYS_SDHC_CLK_2_PLL)
-	case 4:
-		sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 4;
-		break;
-#if defined(CONFIG_ARCH_T2080)
-	case 5:
-		sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK];
-		break;
-#endif
-	case 6:
-		sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK] / 2;
-		break;
-	case 7:
-		sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK] / 3;
-		break;
-#endif
-	default:
-		sys_info->freq_sdhc = 0;
-		printf("Error: Unknown SDHC peripheral clock select!\n");
-	}
-#endif
 #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
 	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
@@ -673,15 +630,11 @@ int get_clocks (void)
 	gd->arch.i2c2_clk = gd->arch.i2c1_clk;
 
 #if defined(CONFIG_FSL_ESDHC)
-#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
-	gd->arch.sdhc_clk = sys_info.freq_sdhc / 2;
-#else
 #if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_ARCH_P1010)
 	gd->arch.sdhc_clk = gd->bus_clk;
 #else
 	gd->arch.sdhc_clk = gd->bus_clk / 2;
 #endif
-#endif
 #endif /* defined(CONFIG_FSL_ESDHC) */
 
 #if defined(CONFIG_CPM2)
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 946e74a93b..4ca1e2b325 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -331,9 +331,6 @@
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_FM_PLAT_CLK_DIV	1
 #define CONFIG_SYS_FM1_CLK		CONFIG_FM_PLAT_CLK_DIV
-#define CONFIG_SYS_SDHC_CLK		0/* Select SDHC CLK begining from PLL1
-					    per rcw field value */
-#define CONFIG_SYS_SDHC_CLK_2_PLL	/* Select SDHC CLK from 2 PLLs */
 #define CONFIG_SYS_FM_MURAM_SIZE	0x30000
 #define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
 #define CONFIG_SYS_FSL_TBCLK_DIV	16
@@ -362,8 +359,6 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	8
 #define CONFIG_SYS_FM1_CLK		0
-#define CONFIG_SYS_SDHC_CLK		0/* Select SDHC CLK begining from PLL1
-					    per rcw field value */
 #define CONFIG_QBMAN_CLK_DIV		1
 #define CONFIG_SYS_FM_MURAM_SIZE	0x30000
 #define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
@@ -402,9 +397,6 @@
 #define CONFIG_PME_PLAT_CLK_DIV		1
 #define CONFIG_SYS_PME_CLK		CONFIG_PME_PLAT_CLK_DIV
 #define CONFIG_SYS_FM1_CLK		0
-#define CONFIG_SYS_SDHC_CLK		1/* Select SDHC CLK begining from PLL2
-					    per rcw field value */
-#define CONFIG_SYS_SDHC_CLK_2_PLL	/* Select SDHC CLK from 2 PLLs */
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	8
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index b8456984e2..aa2a8b00de 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -481,7 +481,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 2078b9d369..be5a658d7e 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -630,7 +630,6 @@ unsigned long get_board_ddr_clk(void);
  * SDHC
  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
diff --git a/include/e500.h b/include/e500.h
index 1acf7784df..255f46bf1e 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -18,7 +18,6 @@ typedef struct
 	unsigned long freq_ddrbus;
 	unsigned long freq_localbus;
 	unsigned long freq_qe;
-	unsigned long freq_sdhc;
 #ifdef CONFIG_SYS_DPAA_FMAN
 	unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
 #endif
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index cd154738a4..95c0ccc9d3 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3777,8 +3777,6 @@ CONFIG_SYS_SCRATCH_VA
 CONFIG_SYS_SCSI_MAX_DEVICE
 CONFIG_SYS_SCSI_MAX_LUN
 CONFIG_SYS_SCSI_MAX_SCSI_ID
-CONFIG_SYS_SDHC_CLK
-CONFIG_SYS_SDHC_CLK_2_PLL
 CONFIG_SYS_SDIO0
 CONFIG_SYS_SDIO0_MAX_CLK
 CONFIG_SYS_SDIO1