powerpc: T1024RDB: Remove macro CONFIG_T1024RDB

Use TARGET_T1024RDB from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Get missing hunk in board/freescale/t102xrdb/ddr.c]
Signed-off-by: Tom Rini <trini@konsulko.com>

4 files changed, 10 insertions, 10 deletions

diff --git a/board/freescale/t102xrdb/Makefile b/board/freescale/t102xrdb/Makefile
index 64528656ac..ddeb44f36e 100644
--- a/board/freescale/t102xrdb/Makefile
+++ b/board/freescale/t102xrdb/Makefile
@@ -8,7 +8,7 @@ ifdef CONFIG_SPL_BUILD
 obj-y	+= spl.o
 else
 obj-y   += t102xrdb.o
-obj-$(CONFIG_T1024RDB)   += cpld.o
+obj-$(CONFIG_TARGET_T1024RDB)   += cpld.o
 obj-y   += eth_t102xrdb.o
 obj-$(CONFIG_PCI)       += pci.o
 endif
diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c
index c09199fb03..e66657869c 100644
--- a/board/freescale/t102xrdb/ddr.c
+++ b/board/freescale/t102xrdb/ddr.c
@@ -140,7 +140,7 @@ found:
 	popts->wrlvl_ctl_2 = 0x07070606;
 	popts->half_strength_driver_enable = 1;
 	popts->cpo_sample = 0x43;
-#elif defined(CONFIG_T1024RDB)
+#elif defined(CONFIG_TARGET_T1024RDB)
 	/* optimize cpo for erratum A-009942 */
 	popts->cpo_sample = 0x52;
 #endif
diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c
index dadfaf1739..c06d1b8e0e 100644
--- a/board/freescale/t102xrdb/eth_t102xrdb.c
+++ b/board/freescale/t102xrdb/eth_t102xrdb.c
@@ -58,7 +58,7 @@ int board_eth_init(bd_t *bis)
 	fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR);
 
 	switch (srds_s1) {
-#ifdef CONFIG_T1024RDB
+#ifdef CONFIG_TARGET_T1024RDB
 	case 0x95:
 		/* set the on-board RGMII2  PHY */
 		fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
@@ -94,7 +94,7 @@ int board_eth_init(bd_t *bis)
 		case PHY_INTERFACE_MODE_SGMII:
 #if defined(CONFIG_TARGET_T1023RDB)
 			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
-#elif defined(CONFIG_T1024RDB)
+#elif defined(CONFIG_TARGET_T1024RDB)
 			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
 #endif
 			fm_info_set_mdio(i, dev);
@@ -128,7 +128,7 @@ int board_eth_init(bd_t *bis)
 void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 			      enum fm_port port, int offset)
 {
-#if defined(CONFIG_T1024RDB)
+#if defined(CONFIG_TARGET_T1024RDB)
 	if (((fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) ||
 	     (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII)) &&
 			(port == FM1_DTSEC3)) {
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
index 317472619f..56f7c1a909 100644
--- a/board/freescale/t102xrdb/t102xrdb.c
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -17,7 +17,7 @@
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include "t102xrdb.h"
-#ifdef CONFIG_T1024RDB
+#ifdef CONFIG_TARGET_T1024RDB
 #include "cpld.h"
 #elif defined(CONFIG_TARGET_T1023RDB)
 #include <i2c.h>
@@ -51,7 +51,7 @@ int checkboard(void)
 	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 
 	printf("Board: %sRDB, ", cpu->name);
-#if defined(CONFIG_T1024RDB)
+#if defined(CONFIG_TARGET_T1024RDB)
 	printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
 	       CPLD_READ(hw_ver), CPLD_READ(sw_ver));
 #elif defined(CONFIG_TARGET_T1023RDB)
@@ -63,7 +63,7 @@ int checkboard(void)
 	puts("SD/MMC\n");
 #elif CONFIG_SPIFLASH
 	puts("SPI\n");
-#elif defined(CONFIG_T1024RDB)
+#elif defined(CONFIG_TARGET_T1024RDB)
 	u8 reg;
 
 	reg = CPLD_READ(flash_csr);
@@ -91,7 +91,7 @@ int checkboard(void)
 	return 0;
 }
 
-#ifdef CONFIG_T1024RDB
+#ifdef CONFIG_TARGET_T1024RDB
 static void board_mux_lane(void)
 {
 	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -150,7 +150,7 @@ int board_early_init_r(void)
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 #endif
 
-#ifdef CONFIG_T1024RDB
+#ifdef CONFIG_TARGET_T1024RDB
 	board_mux_lane();
 #endif