PPC: remove dead boards (AMX860, c2mon, ETX094, IAD210, LANTEC, SCM)

These boards have long reached EOL, and there has been no indication
of any active users of such hardware for years.  Get rid of the dead
weight.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Grandegger <wg@denx.de>

14 files changed, 0 insertions, 3611 deletions

diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c
deleted file mode 100644
index 7325a93647..0000000000
--- a/board/siemens/IAD210/IAD210.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * (C) Copyright 2001
- * Paul Geerinckx
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <net.h>
-#include "atm.h"
-#include <i2c.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-/* used PLD registers */
-#  define PLD_GCR1_REG (unsigned char *) (0x10000000 + 0)
-#  define PLD_EXT_RES  (unsigned char *) (0x10000000 + 10)
-#  define PLD_EXT_FETH (unsigned char *) (0x10000000 + 11)
-#  define PLD_EXT_LED  (unsigned char *) (0x10000000 + 12)
-#  define PLD_EXT_X21  (unsigned char *) (0x10000000 + 13)
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0xFE2DB004, 0xF0AA7004, 0xF0A5F400, 0xF3AFFC47,	/* last */
-	_NOT_USED_,
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-	0xFFFAF834, 0xFFE5B435,	/* last */
-	_NOT_USED_,
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0xFE2DB004, 0xF0AF7404, 0xF0AFFC00, 0xF0AFFC00,
-	0xF0AFFC00, 0xF0AAF800, 0xF1A5E447,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0xFE29B300, 0xF1A27304, 0xFFA5F747,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
-	0xF1AAF804, 0xFFA5F447,	/* last */
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0xFFAC3884, 0xFFAC3404, 0xFFAFFC04, 0xFFAFFC84,
-	0xFFAFFC07,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * MRS sequence  (Offset 38 in UPMA RAM)
-	 */
-	0xFFAAB834, 0xFFA57434, 0xFFAFFC05,	/* last */
-	_NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0xFFAFFC04, 0xFFAFFC05,	/* last */
-	_NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	volatile iop8xx_t *iop = &immap->im_ioport;
-	volatile fec_t *fecp = &immap->im_cpm.cp_fec;
-	long int size;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
-	 * preliminary addresses - these have to be modified after the
-	 * SDRAM size has been determined.
-	 */
-	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
-	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 0 */
-	udelay (1);
-	memctl->memc_mcr = 0x80004230;	/* SDRAM bank 0 - execute twice */
-	udelay (1);
-
-	memctl->memc_mcr = 0x80004105;	/* SDRAM precharge */
-	udelay (1);
-	memctl->memc_mcr = 0x80004030;	/* SDRAM 16x autorefresh */
-	udelay (1);
-	memctl->memc_mcr = 0x80004138;	/* SDRAM upload parameters */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay (1000);
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 *
-	 */
-	size = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE_PRELIM,
-			  SDRAM_MAX_SIZE);
-
-	udelay (1000);
-
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR;
-	udelay (1000);
-
-	/*
-	 * Final mapping
-	 */
-	memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR2_PRELIM;
-	memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V);
-
-	udelay (10000);
-
-	/* prepare pin multiplexing for fast ethernet */
-
-	atmLoad ();
-	fecp->fec_ecntrl = 0x00000004;	/* rev D3 pinmux SET */
-	iop->iop_pdpar |= 0x0080;	/* set pin as MII_clock */
-
-
-	return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size (base, maxsize));
-}
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	return (0);
-}
-
-void board_serial_init (void)
-{
-	;			/* nothing to do here */
-}
-
-void board_ether_init (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile iop8xx_t *iop = &immap->im_ioport;
-	volatile fec_t *fecp = &immap->im_cpm.cp_fec;
-
-	atmLoad ();
-	fecp->fec_ecntrl = 0x00000004;	/* rev D3 pinmux SET */
-	iop->iop_pdpar |= 0x0080;	/* set pin as MII_clock */
-}
-
-int board_early_init_f (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	volatile iop8xx_t *iop = &immap->im_ioport;
-
-	/* configure the LED timing output pins - port A pin 4 */
-	iop->iop_papar = 0x0800;
-	iop->iop_padir = 0x0800;
-
-	/* start timer 2 for the 4hz LED blink rate */
-	timers->cpmt_tmr2 = 0xff2c;	/* 4HZ for 64MHz */
-	timers->cpmt_trr2 = 0x000003d0;	/* clk/16 , prescale=256 */
-	timers->cpmt_tgcr = 0x00000810;	/* run timer 2 */
-
-	/* chip select for PLD access */
-	memctl->memc_br6 = 0x10000401;
-	memctl->memc_or6 = 0xFC000908;
-
-	/* PLD initial values ( set LEDs, remove reset on LXT) */
-
-	*PLD_GCR1_REG = 0x06;
-	*PLD_EXT_RES = 0xC0;
-	*PLD_EXT_FETH = 0x40;
-	*PLD_EXT_LED = 0xFF;
-	*PLD_EXT_X21 = 0x04;
-	return 0;
-}
-
-static void board_get_enetaddr(uchar *addr)
-{
-	int i;
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile cpm8xx_t *cpm = &immap->im_cpm;
-	unsigned int rccrtmp;
-
-	char default_mac_addr[] = { 0x00, 0x08, 0x01, 0x02, 0x03, 0x04 };
-
-	for (i = 0; i < 6; i++)
-		addr[i] = default_mac_addr[i];
-
-	printf ("There is an error in the i2c driver .. /n");
-	printf ("You need to fix it first....../n");
-
-	rccrtmp = cpm->cp_rccr;
-	cpm->cp_rccr |= 0x0020;
-
-	i2c_reg_read (0xa0, 0);
-	printf ("seep = '-%c-%c-%c-%c-%c-%c-'\n",
-		i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
-		i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
-		i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0));
-
-	cpm->cp_rccr = rccrtmp;
-}
-
-int misc_init_r(void)
-{
-	uchar enetaddr[6];
-
-	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-		board_get_enetaddr(enetaddr);
-		eth_setenv_enetaddr("ethaddr", enetaddr);
-	}
-
-	return 0;
-}
diff --git a/board/siemens/IAD210/Makefile b/board/siemens/IAD210/Makefile
deleted file mode 100644
index bb81507815..0000000000
--- a/board/siemens/IAD210/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o flash.o atm.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/siemens/IAD210/atm.c b/board/siemens/IAD210/atm.c
deleted file mode 100644
index 40aad0ac26..0000000000
--- a/board/siemens/IAD210/atm.c
+++ /dev/null
@@ -1,652 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-
-#include "atm.h"
-#include <linux/stddef.h>
-
-#define SYNC __asm__("sync")
-#define MY_ALIGN(p, a) ((char *)(((uint32)(p)+(a)-1) & ~((uint32)(a)-1)))
-
-#define FALSE  1
-#define TRUE   0
-#define OK     0
-#define ERROR -1
-
-struct atm_connection_t g_conn[NUM_CONNECTIONS] =
-{
-  { NULL, 10, NULL, 10,  NULL, NULL, NULL, NULL }, /* OAM  */
-};
-
-struct atm_driver_t g_atm =
-{
-  FALSE,   /* loaded */
-  FALSE,   /* started */
-  NULL,    /* csram */
-  0,       /* csram_size */
-  NULL,    /* am_top */
-  NULL,    /* ap_top */
-  NULL,    /* int_reload_ptr */
-  NULL,    /* int_serv_ptr */
-  NULL,    /* rbd_base_ptr */
-  NULL,    /* tbd_base_ptr */
-  0        /* linerate */
-};
-
-char csram[1024]; /* more than enough for doing nothing*/
-
-int    atmLoad(void);
-void   atmUnload(void);
-int    atmMemInit(void);
-void   atmIntInit(void);
-void   atmApcInit(void);
-void   atmAmtInit(void);
-void   atmCpmInit(void);
-void   atmUtpInit(void);
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmLoad
- *
- * DESCRIPTION: Basic ATM initialization.
- *
- * PARAMETERS: none
- *
- * RETURNS: OK or ERROR
- *
- ****************************************************************************/
-int atmLoad()
-{
-  volatile immap_t       *immap  = (immap_t *)CONFIG_SYS_IMMR;
-  volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
-  volatile iop8xx_t      *iop    = &immap->im_ioport;
-
-  timers->cpmt_tgcr &=  0x0FFF; SYNC;             /* Disable Timer 4 */
-  immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */
-  iop->iop_pdpar &= 0x3FFF; SYNC;                 /* Disable SAR and UTOPIA */
-
-  if ( atmMemInit() != OK ) return ERROR;
-
-  atmIntInit();
-  atmApcInit();
-  atmAmtInit();
-  atmCpmInit();
-  atmUtpInit();
-
-  g_atm.loaded = TRUE;
-
-  return OK;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmUnload
- *
- * DESCRIPTION: Disables ATM and UTOPIA.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmUnload()
-{
-  volatile immap_t       *immap  = (immap_t *)CONFIG_SYS_IMMR;
-  volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
-  volatile iop8xx_t      *iop    = &immap->im_ioport;
-
-  timers->cpmt_tgcr &=  0x0FFF; SYNC;             /* Disable Timer 4 */
-  immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC;  /* Disable SCC4 */
-  iop->iop_pdpar &= 0x3FFF; SYNC;                 /* Disable SAR and UTOPIA */
-  g_atm.loaded = FALSE;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmMemInit
- *
- * DESCRIPTION:
- *
- * The ATM driver uses the following resources:
- *
- * A. Memory in DPRAM to hold
- *
- *     1/ CT          = Connection Table ( RCT & TCT )
- *     2/ TCTE        = Transmit Connection Table Extension
- *     3/ MPHYPT      = Multi-PHY Pointing Table
- *     4/ APCP        = APC Parameter Table
- *     5/ APCT_PRIO_1 = APC Table ( priority 1 for AAL1/2 )
- *     6/ APCT_PRIO_2 = APC Table ( priority 2 for VBR )
- *     7/ APCT_PRIO_3 = APC Table ( priority 3 for UBR )
- *     8/ TQ          = Transmit Queue
- *     9/ AM          = Address Matching Table
- *    10/ AP          = Address Pointing Table
- *
- * B. Memory in cache safe RAM to hold
- *
- *     1/ INT         = Interrupt Queue
- *     2/ RBD         = Receive Buffer Descriptors
- *     3/ TBD         = Transmit Buffer Descriptors
- *
- * This function
- * 1. clears the ATM DPRAM area,
- * 2. Allocates and clears cache safe memory,
- * 3. Initializes 'g_conn'.
- *
- * PARAMETERS: none
- *
- * RETURNS: OK or ERROR
- *
- ****************************************************************************/
-int atmMemInit()
-{
-  int i;
-  unsigned immr = CONFIG_SYS_IMMR;
-  int total_num_rbd = 0;
-  int total_num_tbd = 0;
-
-  memset((char *)CONFIG_SYS_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE);
-
-  g_atm.csram_size = NUM_INT_ENTRIES * SIZE_OF_INT_ENTRY;
-
-  for ( i = 0; i < NUM_CONNECTIONS; ++i ) {
-    total_num_rbd += g_conn[i].num_rbd;
-    total_num_tbd += g_conn[i].num_tbd;
-  }
-
-  g_atm.csram_size += total_num_rbd * SIZE_OF_RBD + total_num_tbd * SIZE_OF_TBD + 4;
-
-  g_atm.csram = &csram[0];
-  memset(&(g_atm.csram), 0x00, g_atm.csram_size);
-
-  g_atm.int_reload_ptr = (uint32 *)MY_ALIGN(g_atm.csram, 4);
-  g_atm.rbd_base_ptr = (struct atm_bd_t *)(g_atm.int_reload_ptr + NUM_INT_ENTRIES);
-  g_atm.tbd_base_ptr = (struct atm_bd_t *)(g_atm.rbd_base_ptr + total_num_rbd);
-
-  g_conn[0].rbd_ptr = g_atm.rbd_base_ptr;
-  g_conn[0].tbd_ptr = g_atm.tbd_base_ptr;
-  g_conn[0].ct_ptr = CT_PTR(immr);
-  g_conn[0].tcte_ptr = TCTE_PTR(immr);
-
-  return OK;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmIntInit
- *
- * DESCRIPTION:
- *
- * Initialization of the MPC860 ESAR Interrupt Queue.
- * This function
- * - clears all entries in the INT,
- * - sets the WRAP bit of the last INT entry,
- * - initializes the 'int_serv_ptr' attribuut of the AtmDriver structure
- *   to the first INT entry.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARKS:
- *
- * - The INT resides in external cache safe memory.
- * - The base address of the INT is stored in g_atm.int_reload_ptr.
- * - The number of entries in the INT is given by NUM_INT_ENTRIES.
- * - The INTBASE field in SAR Parameter RAM is set by atmCpmInit().
- *
- ****************************************************************************/
-void atmIntInit()
-{
-  int i;
-  for ( i = 0; i < NUM_INT_ENTRIES - 1; ++i) g_atm.int_reload_ptr[i] = 0;
-  g_atm.int_reload_ptr[i] = INT_WRAP;
-  g_atm.int_serv_ptr = g_atm.int_reload_ptr;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmApcInit
- *
- * DESCRIPTION:
- *
- * This function initializes the following ATM Pace Controller related
- * data structures:
- *
- * - 1 MPHY Pointing Table (contains only one entry)
- * - 3 APC Parameter Tables (one PHY with 3 priorities)
- * - 3 APC Tables (one table for each priority)
- * - 1 Transmit Queue (one transmit queue per PHY)
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmApcInit()
-{
-  int i;
-  /* unsigned immr = CONFIG_SYS_IMMR; */
-  uint16 * mphypt_ptr = MPHYPT_PTR(CONFIG_SYS_IMMR);
-  struct apc_params_t * apcp_ptr = APCP_PTR(CONFIG_SYS_IMMR);
-  uint16 * apct_prio1_ptr = APCT1_PTR(CONFIG_SYS_IMMR);
-  uint16 * tq_ptr = TQ_PTR(CONFIG_SYS_IMMR);
-  /***************************************************/
-  /* Initialize MPHY Pointing Table (only one entry) */
-  /***************************************************/
-  *mphypt_ptr = APCP_BASE;
-
-  /********************************************/
-  /* Initialize APC parameters for priority 1 */
-  /********************************************/
-  apcp_ptr->apct_base1 = APCT_PRIO_1_BASE;
-  apcp_ptr->apct_end1  =  APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * 2;
-  apcp_ptr->apct_ptr1  =  APCT_PRIO_1_BASE;
-  apcp_ptr->apct_sptr1 = APCT_PRIO_1_BASE;
-  apcp_ptr->etqbase    = TQ_BASE;
-  apcp_ptr->etqend     =  TQ_BASE + ( NUM_TQ_ENTRIES - 1 ) * 2;
-  apcp_ptr->etqaptr    = TQ_BASE;
-  apcp_ptr->etqtptr    = TQ_BASE;
-  apcp_ptr->apc_mi     = 8;
-  apcp_ptr->ncits      = 0x0100;   /* NCITS = 1 */
-  apcp_ptr->apcnt      = 0;
-  apcp_ptr->reserved1  = 0;
-  apcp_ptr->eapcst     = 0x2009;  /* LAST, ESAR, MPHY */
-  apcp_ptr->ptp_counter = 0;
-  apcp_ptr->ptp_txch   = 0;
-  apcp_ptr->reserved2  = 0;
-
-
-  /***************************************************/
-  /* Initialize APC Tables with empty slots (0xFFFF) */
-  /***************************************************/
-  for ( i = 0; i < NUM_APCT_PRIO_1_ENTRIES; ++i ) *(apct_prio1_ptr++) = 0xFFFF;
-
-  /************************/
-  /* Clear Transmit Queue */
-  /************************/
-  for ( i = 0; i < NUM_TQ_ENTRIES; ++i ) *(tq_ptr++) = 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmAmtInit
- *
- * DESCRIPTION:
- *
- * This function clears the first entry in the Address Matching Table and
- * lets the first entry in the Address Pointing table point to the first
- * entry in the TCT table (i.e. the raw cell channel).
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARKS:
- *
- * The values for the AMBASE, AMEND and APBASE registers in SAR parameter
- * RAM are initialized by atmCpmInit().
- *
- ****************************************************************************/
-void atmAmtInit()
-{
-  unsigned immr = CONFIG_SYS_IMMR;
-
-  g_atm.am_top = AM_PTR(immr);
-  g_atm.ap_top = AP_PTR(immr);
-
-  *(g_atm.ap_top--) = CT_BASE;
-  *(g_atm.am_top--) = 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmCpmInit
- *
- * DESCRIPTION:
- *
- * This function initializes the Utopia Interface Parameter RAM Map
- * (SCC4, ATM Protocol) of the Communication Processor Modudule.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmCpmInit()
-{
-  unsigned immr = CONFIG_SYS_IMMR;
-
-  memset((char *)immr + 0x3F00, 0x00, 0xC0);
-
-  /*-----------------------------------------------------------------*/
-  /* RBDBASE - Receive buffer descriptors base address               */
-  /* The RBDs reside in cache safe external memory.                  */
-  /*-----------------------------------------------------------------*/
-  *RBDBASE(immr) = (uint32)g_atm.rbd_base_ptr;
-
-  /*-----------------------------------------------------------------*/
-  /* SRFCR - SAR receive function code                               */
-  /* 0-2 rsvd = 000                                                  */
-  /* 3-4 BO   = 11  Byte ordering (big endian).                      */
-  /* 5-7 FC   = 000 Value driven on the address type signals AT[1-3] */
-  /*                when the SDMA channel accesses memory.           */
-  /*-----------------------------------------------------------------*/
-  *SRFCR(immr) = 0x18;
-
-  /*-----------------------------------------------------------------*/
-  /* SRSTATE - SAR receive status                                    */
-  /* 0 EXT  = 0 Extended mode off.                                   */
-  /* 1 ACP  = 0 Valid only if EXT = 1.                               */
-  /* 2 EC   = 0 Standard 53-byte ATM cell.                           */
-  /* 3 SNC  = 0 In sync. Must be set to 0 during initialization.     */
-  /* 4 ESAR = 1 Enhanced SAR functionality enabled.                  */
-  /* 5 MCF  = 1 Management Cell Filter active.                       */
-  /* 6 SER  = 0 UTOPIA mode.                                         */
-  /* 7 MPY  = 1 Multiple PHY mode.                                   */
-  /*-----------------------------------------------------------------*/
-  *SRSTATE(immr) = 0x0D;
-
-  /*-----------------------------------------------------------------*/
-  /* MRBLR - Maximum receive buffer length register.                 */
-  /* Must be cleared for ATM operation (see also SMRBLR).            */
-  /*-----------------------------------------------------------------*/
-  *MRBLR(immr) = 0;
-
-  /*-----------------------------------------------------------------*/
-  /* RSTATE - SCC internal receive state parameters                  */
-  /* The first byte must be initialized with the value of SRFCR.     */
-  /*-----------------------------------------------------------------*/
-  *RSTATE(immr) = (uint32)(*SRFCR(immr)) << 24;
-
-  /*-----------------------------------------------------------------*/
-  /* STFCR - SAR transmit function code                              */
-  /* 0-2 rsvd = 000                                                  */
-  /* 3-4 BO   = 11  Byte ordering (big endian).                      */
-  /* 5-7 FC   = 000 Value driven on the address type signals AT[1-3] */
-  /*                when the SDMA channel accesses memory.           */
-  /*-----------------------------------------------------------------*/
-  *STFCR(immr) = 0x18;
-
-  /*-----------------------------------------------------------------*/
-  /* SRSTATE - SAR transmit status                                   */
-  /* 0 EXT  = 0 : Extended mode off                                  */
-  /* 1 rsvd = 0 :                                                    */
-  /* 2 EC   = 0 : Standard 53-byte ATM cell                          */
-  /* 3 rsvd = 0 :                                                    */
-  /* 4 ESAR = 1 : Enhanced SAR functionality enabled                 */
-  /* 5 rsvd = 0 :                                                    */
-  /* 6 SER  = 0 : UTOPIA mode                                        */
-  /* 7 MPY  = 1 : Multiple PHY mode                                  */
-  /*-----------------------------------------------------------------*/
-  *STSTATE(immr) = 0x09;
-
-  /*-----------------------------------------------------------------*/
-  /* TBDBASE - Transmit buffer descriptors base address              */
-  /* The TBDs reside in cache safe external memory.                  */
-  /*-----------------------------------------------------------------*/
-  *TBDBASE(immr) = (uint32)g_atm.tbd_base_ptr;
-
-  /*-----------------------------------------------------------------*/
-  /* TSTATE - SCC internal transmit state parameters                 */
-  /* The first byte must be initialized with the value of STFCR.     */
-  /*-----------------------------------------------------------------*/
-  *TSTATE(immr) = (uint32)(*STFCR(immr)) << 24;
-
-  /*-----------------------------------------------------------------*/
-  /* CTBASE - Connection table base address                          */
-  /* Offset from the beginning of DPRAM (64-byte aligned).           */
-  /*-----------------------------------------------------------------*/
-  *CTBASE(immr) = CT_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* INTBASE - Interrupt queue base pointer.                         */
-  /* The interrupt queue resides in cache safe external memory.      */
-  /*-----------------------------------------------------------------*/
-  *INTBASE(immr) = (uint32)g_atm.int_reload_ptr;
-
-  /*-----------------------------------------------------------------*/
-  /* INTPTR - Pointer into interrupt queue.                          */
-  /* Initialize to INTBASE.                                          */
-  /*-----------------------------------------------------------------*/
-  *INTPTR(immr) = *INTBASE(immr);
-
-  /*-----------------------------------------------------------------*/
-  /* C_MASK - Constant mask for CRC32                                */
-  /* Must be initialized to 0xDEBB20E3.                              */
-  /*-----------------------------------------------------------------*/
-  *C_MASK(immr) = 0xDEBB20E3;
-
-  /*-----------------------------------------------------------------*/
-  /* INT_ICNT - Interrupt threshold value                            */
-  /*-----------------------------------------------------------------*/
-  *INT_ICNT(immr) = 1;
-
-  /*-----------------------------------------------------------------*/
-  /* INT_CNT - Interrupt counter                                     */
-  /* Initalize to INT_ICNT. Decremented for each interrupt entry     */
-  /* reported in the interrupt queue. On zero an interrupt is        */
-  /* signaled to the host by setting the GINT bit in the event       */
-  /* register. The counter is reinitialized with INT_ICNT.           */
-  /*-----------------------------------------------------------------*/
-  *INT_CNT(immr) = *INT_ICNT(immr);
-
-  /*-----------------------------------------------------------------*/
-  /* SMRBLR - SAR maximum receive buffer length register.            */
-  /* Must be a multiple of 48 bytes. Common for all ATM connections. */
-  /*-----------------------------------------------------------------*/
-  *SMRBLR(immr) = SAR_RXB_SIZE;
-
-  /*-----------------------------------------------------------------*/
-  /* APCST - APC status register.                                    */
-  /* 0     rsvd 0                                                    */
-  /* 1-2   CSER 11  Initialize with the same value as NSER.          */
-  /* 3-4   NSER 11  Next serial or UTOPIA channel.                   */
-  /* 5-7   rsvd 000                                                  */
-  /* 8-10  rsvd 000                                                  */
-  /* 11    rsvd 0                                                    */
-  /* 12    ESAR 1   UTOPIA Level 2 MPHY enabled.                     */
-  /* 13    DIS  0   APC disable. Must be initiazed to 0.             */
-  /* 14    PL2  0   Not used.                                        */
-  /* 15    MPY  1   Multiple PHY mode on.                            */
-  /*-----------------------------------------------------------------*/
-  *APCST(immr) = 0x7809;
-
-  /*-----------------------------------------------------------------*/
-  /* APCPTR - Pointer to the APC parameter table                     */
-  /* In MPHY master mode this parameter points to the MPHY pointing  */
-  /* table. 2-byte aligned.                                          */
-  /*-----------------------------------------------------------------*/
-  *APCPTR(immr) = MPHYPT_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* HMASK - Header mask                                             */
-  /* Each incoming cell is masked with HMASK before being compared   */
-  /* to the entries in the address matching table.                   */
-  /*-----------------------------------------------------------------*/
-  *HMASK(immr) = AM_HMASK;
-
-  /*-----------------------------------------------------------------*/
-  /* AMBASE - Address matching table base address                    */
-  /*-----------------------------------------------------------------*/
-  *AMBASE(immr) = AM_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* AMEND - Address matching table end address                      */
-  /*-----------------------------------------------------------------*/
-  *AMEND(immr) = AM_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* APBASE - Address pointing table base address                    */
-  /*-----------------------------------------------------------------*/
-  *APBASE(immr) = AP_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* MPHYST - MPHY status register                                   */
-  /* 0-1   rsvd  00                                                  */
-  /* 2-6   NMPHY 00000 1 PHY                                         */
-  /* 7-9   rsvd  000                                                 */
-  /* 10-14 CMPHY 00000 Initialize with same value as NMPHY           */
-  /*-----------------------------------------------------------------*/
-  *MPHYST(immr) = 0x0000;
-
-  /*-----------------------------------------------------------------*/
-  /* TCTEBASE - Transmit connection table extension base address     */
-  /* Offset from the beginning of DPRAM (32-byte aligned).           */
-  /*-----------------------------------------------------------------*/
-  *TCTEBASE(immr) = TCTE_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* Clear not used registers.                                       */
-  /*-----------------------------------------------------------------*/
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmUtpInit
- *
- * DESCRIPTION:
- *
- * This function initializes the ATM interface for
- *
- * - UTOPIA mode
- * - muxed bus
- * - master operation
- * - multi PHY (because of a bug in the MPC860P rev. E.0)
- * - internal clock = SYSCLK / 2
- *
- * EXTERNAL EFFECTS:
- *
- * After calling this function, the MPC860ESAR UTOPIA bus is
- * active and uses the following ports/pins:
- *
- * Port    Pin  Signal   Description
- * ------  ---  -------  -------------------------------------------
- * PB[15]  R17  TxClav   Transmit cell available input/output signal
- * PC[15]  D16  RxClav   Receive cell available input/output signal
- * PD[15]  U17  UTPB[0]  UTOPIA bus bit 0 input/output signal
- * PD[14]  V19  UTPB[1]  UTOPIA bus bit 1 input/output signal
- * PD[13]  V18  UTPB[2]  UTOPIA bus bit 2 input/output signal
- * PD[12]  R16  UTPB[3]  UTOPIA bus bit 3 input/output signal
- * PD[11]  T16  RXENB    Receive enable input/output signal
- * PD[10]  W18  TXENB    Transmit enable input/output signal
- * PD[9]   V17  UTPCLK   UTOPIA clock input/output signal
- * PD[7]   T15  UTPB[4]  UTOPIA bus bit 4 input/output signal
- * PD[6]   V16  UTPB[5]  UTOPIA bus bit 5 input/output signal
- * PD[5]   U15  UTPB[6]  UTOPIA bus bit 6 input/output signal
- * PD[4]   U16  UTPB[7]  UTOPIA bus bit 7 input/output signal
- * PD[3]   W16  SOC      Start of cell input/output signal
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARK:
- *
- * The ATM parameters and data structures must be configured before
- * initializing the UTOPIA port. The UTOPIA port activates immediately
- * upon initialization, and if its associated data structures are not
- * initialized, the CPM will lock up.
- *
- ****************************************************************************/
-void atmUtpInit()
-{
-  volatile immap_t       *immap  = (immap_t *)CONFIG_SYS_IMMR;
-  volatile iop8xx_t      *iop    = &immap->im_ioport;
-  volatile car8xx_t	 *car    = &immap->im_clkrst;
-  volatile cpm8xx_t	 *cpm    = &immap->im_cpm;
-  int flag;
-
-  flag = disable_interrupts();
-
-  /*-----------------------------------------------------------------*/
-  /* SCCR - System Clock Control Register                            */
-  /*                                                                 */
-  /* The UTOPIA clock can be selected to be internal clock or        */
-  /* external clock (selected by the UTOPIA mode register).          */
-  /* In case of internal clock, the UTOPIA clock is derived from     */
-  /* the system frequency divided by two dividers.                   */
-  /* Bits 27-31 of the SCCR register are defined to control the      */
-  /* UTOPIA clock.                                                   */
-  /*                                                                 */
-  /* SCCR[27:29] DFUTP  Division factor. Divide the system clock     */
-  /*                    by 2^DFUTP.                                  */
-  /* SCCR[30:31] DFAUTP Additional division factor. Divide the       */
-  /*                    system clock by the following value:         */
-  /*                    00 = divide by 1                             */
-  /*                    00 = divide by 3                             */
-  /*                    10 = divide by 5                             */
-  /*                    11 = divide by 7                             */
-  /*                                                                 */
-  /* Note that the UTOPIA clock must be programmed as to operate     */
-  /* within the range SYSCLK/10 .. 50MHz.                            */
-  /*-----------------------------------------------------------------*/
-  car->car_sccr &= 0xFFFFFFE0;
-  car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */
-
-  /*-----------------------------------------------------------------*/
-  /* RCCR - RISC Controller Configuration Register                   */
-  /*                                                                 */
-  /* RCCR[8]     DR1M IDMA Request 0 Mode                            */
-  /*                  0 = edge sensitive                             */
-  /*                  1 = level sensitive                            */
-  /* RCCR[9]     DR0M IDMA Request 0 Mode                            */
-  /*                  0 = edge sensitive                             */
-  /*                  1 = level sensitive                            */
-  /* RCCR[10:11] DRQP IDMA Request Priority                          */
-  /*                  00 = IDMA req. have more prio. than SCCs       */
-  /*                  01 = IDMA req. have less prio. then SCCs       */
-  /*                  10 = IDMA requests have the lowest prio.       */
-  /*                  11 = reserved                                  */
-  /*                                                                 */
-  /* The RCCR[DR0M] and RCCR[DR1M] bits must be set to enable UTOPIA */
-  /* operation. Also, program RCCR[DPQP] to 01 to give SCC transfers */
-  /* higher priority.                                                */
-  /*-----------------------------------------------------------------*/
-  cpm->cp_rccr &= 0xFF0F;
-  cpm->cp_rccr |= 0x00D0;
-
-  /*-----------------------------------------------------------------*/
-  /* Port B - TxClav Signal                                          */
-  /*-----------------------------------------------------------------*/
-  cpm->cp_pbpar |= 0x00010000; /* PBPAR[15] = 1 */
-  cpm->cp_pbdir &= 0xFFFEFFFF; /* PBDIR[15] = 0 */
-
-  /*-----------------------------------------------------------------*/
-  /* UTOPIA Mode Register                                            */
-  /*                                                                 */
-  /* - muxed bus (master operation only)                             */
-  /* - multi PHY (because of a bug in the MPC860P rev.E.0)           */
-  /* - internal clock                                                */
-  /* - no loopback                                                   */
-  /* - do no activate statistical counters                           */
-  /*-----------------------------------------------------------------*/
-  iop->utmode = 0x00000004; SYNC;
-
-  /*-----------------------------------------------------------------*/
-  /* Port D - UTOPIA Data and Control Signals                        */
-  /*                                                                 */
-  /* 15-12 UTPB[0:3] UTOPIA bus bit 0 - 3 input/output signals       */
-  /* 11    RXENB     UTOPIA receive enable input/output signal       */
-  /* 10    TXENB     UTOPIA transmit enable input/output signal      */
-  /* 9     TUPCLK    UTOPIA clock input/output signal                */
-  /* 8     MII-MDC   Used by MII in simult. MII and UTOPIA operation */
-  /* 7-4   UTPB[4:7] UTOPIA bus bit 4 - 7 input/output signals       */
-  /* 3     SOC       UTOPIA Start of cell input/output signal        */
-  /* 2               Reserved                                        */
-  /* 1               Enable UTOPIA mode                              */
-  /* 0               Enable SAR                                      */
-  /*-----------------------------------------------------------------*/
-  iop->iop_pdpar |= 0xDF7F; SYNC;
-  iop->iop_pddir &= 0x2080; SYNC;
-
-  /*-----------------------------------------------------------------*/
-  /* Port C - RxClav Signal                                          */
-  /*-----------------------------------------------------------------*/
-  iop->iop_pcpar  |= 0x0001; /* PCPAR[15] = 1 */
-  iop->iop_pcdir  &= 0xFFFE; /* PCDIR[15] = 0 */
-  iop->iop_pcso   &= 0xFFFE; /* PCSO[15]  = 0 */
-
-  if (flag)
-    enable_interrupts();
-}
diff --git a/board/siemens/IAD210/atm.h b/board/siemens/IAD210/atm.h
deleted file mode 100644
index cd5b45e869..0000000000
--- a/board/siemens/IAD210/atm.h
+++ /dev/null
@@ -1,287 +0,0 @@
-typedef unsigned char uint8;
-typedef unsigned short uint16;
-typedef unsigned int uint32;
-typedef volatile unsigned char vuint8;
-typedef volatile unsigned short vuint16;
-typedef volatile unsigned int vuint32;
-
-
-#define DPRAM_ATM CONFIG_SYS_IMMR + 0x3000
-
-#define ATM_DPRAM_BEGIN  (DPRAM_ATM - CONFIG_SYS_IMMR - 0x2000)
-#define NUM_CONNECTIONS  1
-#define SAR_RXB_SIZE     1584
-#define AM_HMASK         0x0FFFFFF0
-
-#define NUM_CT_ENTRIES           (NUM_CONNECTIONS)
-#define NUM_TCTE_ENTRIES         (NUM_CONNECTIONS)
-#define NUM_AM_ENTRIES           (NUM_CONNECTIONS+1)
-#define NUM_AP_ENTRIES           (NUM_CONNECTIONS+1)
-#define NUM_MPHYPT_ENTRIES       1
-#define NUM_APCP_ENTRIES         1
-#define NUM_APCT_PRIO_1_ENTRIES  146	/* Determines minimum rate */
-#define NUM_TQ_ENTRIES           12
-
-#define SIZE_OF_CT_ENTRY         64
-#define SIZE_OF_TCTE_ENTRY       32
-#define SIZE_OF_AM_ENTRY         4
-#define SIZE_OF_AP_ENTRY         2
-#define SIZE_OF_MPHYPT_ENTRY     2
-#define SIZE_OF_APCP_ENTRY       32
-#define SIZE_OF_APCT_ENTRY       2
-#define SIZE_OF_TQ_ENTRY         2
-
-#define CT_BASE           ((ATM_DPRAM_BEGIN + 63) & 0xFFC0)	/*64 */
-#define TCTE_BASE         (CT_BASE + NUM_CT_ENTRIES * SIZE_OF_CT_ENTRY)	/*32 */
-#define APCP_BASE         (TCTE_BASE + NUM_TCTE_ENTRIES * SIZE_OF_TCTE_ENTRY)	/*32 */
-#define AM_BEGIN          (APCP_BASE + NUM_APCP_ENTRIES * SIZE_OF_APCP_ENTRY)	/*4 */
-#define AM_BASE           (AM_BEGIN + (NUM_AM_ENTRIES - 1) * SIZE_OF_AM_ENTRY)
-#define AP_BEGIN          (AM_BEGIN + NUM_AM_ENTRIES * SIZE_OF_AM_ENTRY)	/*2 */
-#define AP_BASE           (AP_BEGIN + (NUM_AP_ENTRIES - 1) * SIZE_OF_AP_ENTRY)
-#define MPHYPT_BASE       (AP_BEGIN + NUM_AP_ENTRIES * SIZE_OF_AP_ENTRY)	/*2 */
-#define APCT_PRIO_1_BASE  (MPHYPT_BASE + NUM_MPHYPT_ENTRIES * SIZE_OF_MPHYPT_ENTRY)	/*2 */
-#define TQ_BASE           (APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * SIZE_OF_APCT_ENTRY)	/*2 */
-#define ATM_DPRAM_SIZE    ((TQ_BASE + NUM_TQ_ENTRIES * SIZE_OF_TQ_ENTRY) - ATM_DPRAM_BEGIN)
-
-#define CT_PTR(base)      ((struct ct_entry_t *)((char *)(base) + 0x2000 + CT_BASE))
-#define TCTE_PTR(base)    ((struct tcte_entry_t *)((char *)(base) + 0x2000 + TCTE_BASE))
-#define AM_PTR(base)      ((uint32 *)((char *)(base) + 0x2000 + AM_BASE))
-#define AP_PTR(base)      ((uint16 *)((char *)(base) + 0x2000 + AP_BASE))
-#define MPHYPT_PTR(base)  ((uint16 *)((char *)(base) + 0x2000 + MPHYPT_BASE))
-#define APCP_PTR(base)    ((struct apc_params_t *)((char*)(base) + 0x2000 + APCP_BASE))
-#define APCT1_PTR(base)   ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_1_BASE))
-#define APCT2_PTR(base)   ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_2_BASE))
-#define APCT3_PTR(base)   ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_3_BASE))
-#define TQ_PTR(base)      ((uint16 *)((char *)(base) + 0x2000 + TQ_BASE))
-
-/* SAR registers */
-#define RBDBASE(base)	  ((vuint32 *)(base + 0x3F00))	/* Base address of RxBD-List */
-#define SRFCR(base)	  ((vuint8 *)(base + 0x3F04))	/* DMA Receive function code */
-#define SRSTATE(base)	  ((vuint8 *)(base + 0x3F05))	/* DMA Receive status */
-#define MRBLR(base)	  ((vuint16 *)(base + 0x3F06))	/* Init to 0 for ATM */
-#define RSTATE(base)	  ((vuint32 *)(base + 0x3F08))	/* Do not write to */
-#define R_CNT(base)	  ((vuint16 *)(base + 0x3F10))	/* Do not write to */
-#define STFCR(base)	  ((vuint8 *)(base + 0x3F12))	/* DMA Transmit function code */
-#define STSTATE(base)	  ((vuint8 *)(base + 0x3F13))	/* DMA Transmit status */
-#define TBDBASE(base)	  ((vuint32 *)(base + 0x3F14))	/* Base address of TxBD-List */
-#define TSTATE(base)	  ((vuint32 *)(base + 0x3F18))	/* Do not write to */
-#define COMM_CH(base)	  ((vuint16 *)(base + 0x3F1C))	/* Command channel */
-#define STCHNUM(base)	  ((vuint16 *)(base + 0x3F1E))	/* Do not write to */
-#define T_CNT(base)	  ((vuint16 *)(base + 0x3F20))	/* Do not write to */
-#define CTBASE(base)	  ((vuint16 *)(base + 0x3F22))	/* Base address of Connection-table */
-#define ECTBASE(base)	  ((vuint32 *)(base + 0x3F24))	/* Valid only for external Conn.-table */
-#define INTBASE(base)	  ((vuint32 *)(base + 0x3F28))	/* Base address of Interrupt-table */
-#define INTPTR(base)	  ((vuint32 *)(base + 0x3F2C))	/* Pointer to Interrupt-queue */
-#define C_MASK(base)	  ((vuint32 *)(base + 0x3F30))	/* CRC-mask */
-#define SRCHNUM(base)	  ((vuint16 *)(base + 0x3F34))	/* Do not write to */
-#define INT_CNT(base)	  ((vuint16 *)(base + 0x3F36))	/* Interrupt-Counter */
-#define INT_ICNT(base)	  ((vuint16 *)(base + 0x3F38))	/* Interrupt threshold */
-#define TSTA(base)	  ((vuint16 *)(base + 0x3F3A))	/* Time-stamp-address */
-#define OLDLEN(base)	  ((vuint16 *)(base + 0x3F3C))	/* Do not write to */
-#define SMRBLR(base)	  ((vuint16 *)(base + 0x3F3E))	/* SAR max RXBuffer length */
-#define EHEAD(base)	  ((vuint32 *)(base + 0x3F40))	/* Valid for serial mode */
-#define EPAYLOAD(base)	  ((vuint32 *)(base + 0x3F44))	/* Valid for serial mode */
-#define TQBASE(base)	  ((vuint16 *)(base + 0x3F48))	/* Base address of Tx queue */
-#define TQEND(base)	  ((vuint16 *)(base + 0x3F4A))	/* End address of Tx queue */
-#define TQAPTR(base)	  ((vuint16 *)(base + 0x3F4C))	/* TQ APC pointer */
-#define TQTPTR(base)	  ((vuint16 *)(base + 0x3F4E))	/* TQ Tx pointer */
-#define APCST(base)	  ((vuint16 *)(base + 0x3F50))	/* APC status */
-#define APCPTR(base)	  ((vuint16 *)(base + 0x3F52))	/* APC parameter pointer */
-#define HMASK(base)	  ((vuint32 *)(base + 0x3F54))	/* Header mask */
-#define AMBASE(base)	  ((vuint16 *)(base + 0x3F58))	/* Address match table base */
-#define AMEND(base)	  ((vuint16 *)(base + 0x3F5A))	/* Address match table end */
-#define APBASE(base)	  ((vuint16 *)(base + 0x3F5C))	/* Address match parameter */
-#define FLBASE(base)	  ((vuint32 *)(base + 0x3F54))	/* First-level table base */
-#define SLBASE(base)	  ((vuint32 *)(base + 0x3F58))	/* Second-level table base */
-#define FLMASK(base)	  ((vuint16 *)(base + 0x3F5C))	/* First-level mask */
-#define ECSIZE(base)	  ((vuint16 *)(base + 0x3F5E))	/* Valid for extended mode */
-#define APCT_REAL(base)	  ((vuint32 *)(base + 0x3F60))	/* APC 32 bit counter */
-#define R_PTR(base)	  ((vuint32 *)(base + 0x3F64))	/* Do not write to */
-#define RTEMP(base)	  ((vuint32 *)(base + 0x3F68))	/* Do not write to */
-#define T_PTR(base)	  ((vuint32 *)(base + 0x3F6C))	/* Do not write to */
-#define TTEMP(base)	  ((vuint32 *)(base + 0x3F70))	/* Do not write to */
-
-/* ESAR registers */
-#define FMCTIMESTMP(base) ((vuint32 *)(base + 0x3F80))	/* Perf.Mon.Timestamp */
-#define FMCTEMPLATE(base) ((vuint32 *)(base + 0x3F84))	/* Perf.Mon.Template */
-#define PMPTR(base)       ((vuint16 *)(base + 0x3F88))	/* Perf.Mon.Table */
-#define PMCHANNEL(base)	  ((vuint16 *)(base + 0x3F8A))	/* Perf.Mon.Channel */
-#define MPHYST(base)	  ((vuint16 *)(base + 0x3F90))	/* Multi-PHY Status */
-#define TCTEBASE(base)	  ((vuint16 *)(base + 0x3F92))	/* Internal TCT Extension Base */
-#define ETCTEBASE(base)	  ((vuint32 *)(base + 0x3F94))	/* External TCT Extension Base */
-#define COMM_CH2(base)	  ((vuint32 *)(base + 0x3F98))	/* 2nd command channel word */
-#define STATBASE(base)	  ((vuint16 *)(base + 0x3F9C))	/* Statistics table pointer */
-
-/* UTOPIA Mode Register */
-#define UTMODE(base)      (CAST(vuint32 *)(base + 0x0978))
-
-/* SAR commands */
-#define TRANSMIT_CHANNEL_ACTIVATE_CMD   0x0FC1
-#define TRANSMIT_CHANNEL_DEACTIVATE_CMD 0x1FC1
-#define STOP_TRANSMIT_CMD               0x2FC1
-#define RESTART_TRANSMIT_CMD            0x3FC1
-#define STOP_RECEIVE_CMD                0x4FC1
-#define RESTART_RECEIVE_CMD             0x5FC1
-#define APC_BYPASS_CMD                  0x6FC1
-#define MEM_WRITE_CMD                   0x7FC1
-#define CPCR_FLG                        0x0001
-
-/* INT flags */
-#define INT_VALID	0x80000000
-#define INT_WRAP	0x40000000
-#define INT_APCO	0x00800000
-#define INT_TQF		0x00200000
-#define INT_RXF		0x00080000
-#define INT_BSY		0x00040000
-#define INT_TXB		0x00020000
-#define INT_RXB		0x00010000
-
-#define NUM_INT_ENTRIES   80
-#define SIZE_OF_INT_ENTRY 4
-
-struct apc_params_t {
-	vuint16 apct_base1;	/* APC Table - First Priority Base pointer */
-	vuint16 apct_end1;	/* First APC Table - Length */
-	vuint16 apct_ptr1;	/* First APC Table Pointer */
-	vuint16 apct_sptr1;	/* APC Table First Priority Service pointer */
-	vuint16 etqbase;	/* Enhanced Transmit Queue Base pointer */
-	vuint16 etqend;		/* Enhanced Transmit Queue End pointer */
-	vuint16 etqaptr;	/* Enhanced Transmit Queue APC pointer */
-	vuint16 etqtptr;	/* Enhanced Transmit Queue Transmitter pointer */
-	vuint16 apc_mi;		/* APC - Max Iteration */
-	vuint16 ncits;		/* Number of Cells In TimeSlot  */
-	vuint16 apcnt;		/* APC - N Timer */
-	vuint16 reserved1;	/* reserved */
-	vuint16 eapcst;		/* APC status */
-	vuint16 ptp_counter;	/* PTP queue length */
-	vuint16 ptp_txch;	/* PTP channel */
-	vuint16 reserved2;	/* reserved */
-};
-
-struct ct_entry_t {
-	/* RCT */
-	unsigned fhnt:1;
-	unsigned pm_rct:1;
-	unsigned reserved0:6;
-	unsigned hec:1;
-	unsigned clp:1;
-	unsigned cng_ncrc:1;
-	unsigned inf_rct:1;
-	unsigned cngi_ptp:1;
-	unsigned cdis_rct:1;
-	unsigned aal_rct:2;
-	uint16 rbalen;
-	uint32 rcrc;
-	uint32 rb_ptr;
-	uint16 rtmlen;
-	uint16 rbd_ptr;
-	uint16 rbase;
-	uint16 tstamp;
-	uint16 imask;
-	unsigned ft:2;
-	unsigned nim:1;
-	unsigned reserved1:2;
-	unsigned rpmt:6;
-	unsigned reserved2:5;
-	uint8 reserved3[8];
-	/* TCT */
-	unsigned reserved4:1;
-	unsigned pm_tct:1;
-	unsigned reserved5:6;
-	unsigned pc:1;
-	unsigned reserved6:2;
-	unsigned inf_tct:1;
-	unsigned cr10:1;
-	unsigned cdis_tct:1;
-	unsigned aal_tct:2;
-	uint16 tbalen;
-	uint32 tcrc;
-	uint32 tb_ptr;
-	uint16 ttmlen;
-	uint16 tbd_ptr;
-	uint16 tbase;
-	unsigned reserved7:5;
-	unsigned tpmt:6;
-	unsigned reserved8:3;
-	unsigned avcf:1;
-	unsigned act:1;
-	uint32 chead;
-	uint16 apcl;
-	uint16 apcpr;
-	unsigned out:1;
-	unsigned bnr:1;
-	unsigned tservice:2;
-	unsigned apcp:12;
-	uint16 apcpf;
-};
-
-struct tcte_entry_t {
-	unsigned res1:4;
-	unsigned scr:12;
-	uint16 scrf;
-	uint16 bt;
-	uint16 buptrh;
-	uint32 buptrl;
-	unsigned vbr2:1;
-	unsigned res2:15;
-	uint16 oobr;
-	uint16 res3[8];
-};
-
-#define SIZE_OF_RBD  12
-#define SIZE_OF_TBD  12
-
-struct atm_bd_t {
-	vuint16 flags;
-	vuint16 length;
-	unsigned char *buffer_ptr;
-	vuint16 cpcs_uu_cpi;
-	vuint16 reserved;
-};
-
-/* BD flags */
-#define EMPTY		0x8000
-#define READY		0x8000
-#define WRAP		0x2000
-#define INTERRUPT	0x1000
-#define LAST		0x0800
-#define FIRST		0x0400
-#define OAM             0x0400
-#define CONTINUOUS	0x0200
-#define HEC_ERROR	0x0080
-#define CELL_LOSS	0x0040
-#define CONGESTION	0x0020
-#define ABORT		0x0010
-#define LEN_ERROR	0x0002
-#define CRC_ERROR	0x0001
-
-struct atm_connection_t {
-	struct atm_bd_t *rbd_ptr;
-	int num_rbd;
-	struct atm_bd_t *tbd_ptr;
-	int num_tbd;
-	struct ct_entry_t *ct_ptr;
-	struct tcte_entry_t *tcte_ptr;
-	void *drv;
-	void (*notify) (void *drv, int event);
-};
-
-struct atm_driver_t {
-	int loaded;
-	int started;
-	char *csram;
-	int csram_size;
-	uint32 *am_top;
-	uint16 *ap_top;
-	uint32 *int_reload_ptr;
-	uint32 *int_serv_ptr;
-	struct atm_bd_t *rbd_base_ptr;
-	struct atm_bd_t *tbd_base_ptr;
-	unsigned linerate_in_bps;
-};
-
-extern struct atm_connection_t g_conn[NUM_CONNECTIONS];
-extern struct atm_driver_t g_atm;
-
-extern int atmLoad (void);
-extern void atmUnload (void);
diff --git a/board/siemens/IAD210/flash.c b/board/siemens/IAD210/flash.c
deleted file mode 100644
index c262e0f836..0000000000
--- a/board/siemens/IAD210/flash.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-  volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-  volatile memctl8xx_t *memctl = &immap->im_memctl;
-  unsigned long size;
-  int i;
-
-  /* Init: no FLASHes known */
-  for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-    flash_info[i].flash_id = FLASH_UNKNOWN;
-  }
-
-  /* Static FLASH Bank configuration here - FIXME XXX */
-
-  size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-  if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-    printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size, size<<20);
-  }
-
-
-  /* Remap FLASH according to real size */
-  memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-  memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-  /* Re-do sizing to get full correct info */
-  size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-  flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-  flash_info[0].size = size;
-
-  return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-  int i;
-
-  /* set up sector start address table */
-  if (info->flash_id & FLASH_BTYPE) {
-    /* set sector offsets for bottom boot block type	*/
-    info->start[0] = base + 0x00000000;
-    info->start[1] = base + 0x00008000;
-    info->start[2] = base + 0x0000C000;
-    info->start[3] = base + 0x00010000;
-    for (i = 4; i < info->sector_count; i++) {
-      info->start[i] = base + (i * 0x00020000) - 0x00060000;
-    }
-  } else {
-    /* set sector offsets for top boot block type		*/
-    i = info->sector_count - 1;
-    info->start[i--] = base + info->size - 0x00008000;
-    info->start[i--] = base + info->size - 0x0000C000;
-    info->start[i--] = base + info->size - 0x00010000;
-    for (; i >= 0; i--) {
-      info->start[i] = base + i * 0x00020000;
-    }
-  }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-  int i;
-
-  if (info->flash_id == FLASH_UNKNOWN) {
-    printf ("missing or unknown FLASH type\n");
-    return;
-  }
-
-  switch (info->flash_id & FLASH_VENDMASK) {
-  case FLASH_MAN_AMD:	printf ("AMD ");		break;
-  case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-  default:		printf ("Unknown Vendor ");	break;
-  }
-
-  switch (info->flash_id & FLASH_TYPEMASK) {
-  case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-    break;
-  case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-    break;
-  case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-    break;
-  case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-    break;
-  case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-    break;
-  case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-    break;
-  case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-    break;
-  case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-    break;
-  default:		printf ("Unknown Chip Type\n");
-    break;
-  }
-
-  printf ("  Size: %ld MB in %d Sectors\n",
-	  info->size >> 20, info->sector_count);
-
-  printf ("  Sector Start Addresses:");
-  for (i=0; i<info->sector_count; ++i) {
-    if ((i % 5) == 0)
-      printf ("\n   ");
-    printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-	    );
-  }
-  printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-  short i;
-  ulong value;
-  ulong base = (ulong)addr;
-
-
-  /* Write auto select command: read Manufacturer ID */
-  addr[0x0555] = 0x00AA00AA;
-  addr[0x02AA] = 0x00550055;
-  addr[0x0555] = 0x00900090;
-
-  value = addr[0];
-
-  switch (value) {
-  case AMD_MANUFACT:
-    info->flash_id = FLASH_MAN_AMD;
-    break;
-  case FUJ_MANUFACT:
-    info->flash_id = FLASH_MAN_FUJ;
-    break;
-  default:
-    info->flash_id = FLASH_UNKNOWN;
-    info->sector_count = 0;
-    info->size = 0;
-    return (0);			/* no or unknown flash	*/
-  }
-
-  value = addr[1];			/* device ID		*/
-
-  switch (value) {
-  case AMD_ID_LV400T:
-    info->flash_id += FLASH_AM400T;
-    info->sector_count = 11;
-    info->size = 0x00100000;
-    break;				/* => 1 MB		*/
-
-  case AMD_ID_LV400B:
-    info->flash_id += FLASH_AM400B;
-    info->sector_count = 11;
-    info->size = 0x00100000;
-    break;				/* => 1 MB		*/
-
-  case AMD_ID_LV800T:
-    info->flash_id += FLASH_AM800T;
-    info->sector_count = 19;
-    info->size = 0x00200000;
-    break;				/* => 2 MB		*/
-
-  case AMD_ID_LV800B:
-    info->flash_id += FLASH_AM800B;
-    info->sector_count = 19;
-    info->size = 0x00200000;
-    break;				/* => 2 MB		*/
-
-  case AMD_ID_LV160T:
-    info->flash_id += FLASH_AM160T;
-    info->sector_count = 35;
-    info->size = 0x00400000;
-    break;				/* => 4 MB		*/
-
-  case AMD_ID_LV160B:
-    info->flash_id += FLASH_AM160B;
-    info->sector_count = 35;
-    info->size = 0x00400000;
-    break;				/* => 4 MB		*/
-#if 0	/* enable when device IDs are available */
-  case AMD_ID_LV320T:
-    info->flash_id += FLASH_AM320T;
-    info->sector_count = 67;
-    info->size = 0x00800000;
-    break;				/* => 8 MB		*/
-
-  case AMD_ID_LV320B:
-    info->flash_id += FLASH_AM320B;
-    info->sector_count = 67;
-    info->size = 0x00800000;
-    break;				/* => 8 MB		*/
-#endif
-  default:
-    info->flash_id = FLASH_UNKNOWN;
-    return (0);			/* => no or unknown flash */
-
-  }
-
-  /* set up sector start address table */
-  if (info->flash_id & FLASH_BTYPE) {
-    /* set sector offsets for bottom boot block type	*/
-    info->start[0] = base + 0x00000000;
-    info->start[1] = base + 0x00008000;
-    info->start[2] = base + 0x0000C000;
-    info->start[3] = base + 0x00010000;
-    for (i = 4; i < info->sector_count; i++) {
-      info->start[i] = base + (i * 0x00020000) - 0x00060000;
-    }
-  } else {
-    /* set sector offsets for top boot block type		*/
-    i = info->sector_count - 1;
-    info->start[i--] = base + info->size - 0x00008000;
-    info->start[i--] = base + info->size - 0x0000C000;
-    info->start[i--] = base + info->size - 0x00010000;
-    for (; i >= 0; i--) {
-      info->start[i] = base + i * 0x00020000;
-    }
-  }
-
-  /* check for protected sectors */
-  for (i = 0; i < info->sector_count; i++) {
-    /* read sector protection at sector address, (A7 .. A0) = 0x02 */
-    /* D0 = 1 if protected */
-    addr = (volatile unsigned long *)(info->start[i]);
-    info->protect[i] = addr[2] & 1;
-  }
-
-  /*
-   * Prevent writes to uninitialized FLASH.
-   */
-  if (info->flash_id != FLASH_UNKNOWN) {
-    addr = (volatile unsigned long *)info->start[0];
-
-    *addr = 0x00F000F0;	/* reset bank */
-  }
-
-  return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-  vu_long *addr = (vu_long*)(info->start[0]);
-  int flag, prot, sect, l_sect;
-  ulong start, now, last;
-
-  if ((s_first < 0) || (s_first > s_last)) {
-    if (info->flash_id == FLASH_UNKNOWN) {
-      printf ("- missing\n");
-    } else {
-      printf ("- no sectors to erase\n");
-    }
-    return 1;
-  }
-
-  if ((info->flash_id == FLASH_UNKNOWN) ||
-      (info->flash_id > FLASH_AMD_COMP)) {
-    printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-    return 1;
-  }
-
-  prot = 0;
-  for (sect=s_first; sect<=s_last; ++sect) {
-    if (info->protect[sect]) {
-      prot++;
-    }
-  }
-
-  if (prot) {
-    printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-  } else {
-    printf ("\n");
-  }
-
-  l_sect = -1;
-
-  /* Disable interrupts which might cause a timeout here */
-  flag = disable_interrupts();
-
-  addr[0x0555] = 0x00AA00AA;
-  addr[0x02AA] = 0x00550055;
-  addr[0x0555] = 0x00800080;
-  addr[0x0555] = 0x00AA00AA;
-  addr[0x02AA] = 0x00550055;
-
-  /* Start erase on unprotected sectors */
-  for (sect = s_first; sect<=s_last; sect++) {
-    if (info->protect[sect] == 0) {	/* not protected */
-      addr = (vu_long*)(info->start[sect]);
-      addr[0] = 0x00300030;
-      l_sect = sect;
-    }
-  }
-
-  /* re-enable interrupts if necessary */
-  if (flag)
-    enable_interrupts();
-
-  /* wait at least 80us - let's wait 1 ms */
-  udelay (1000);
-
-  /*
-   * We wait for the last triggered sector
-   */
-  if (l_sect < 0)
-    goto DONE;
-
-  start = get_timer (0);
-  last  = start;
-  addr = (vu_long*)(info->start[l_sect]);
-  while ((addr[0] & 0x00800080) != 0x00800080) {
-    if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-      printf ("Timeout\n");
-      return 1;
-    }
-    /* show that we're waiting */
-    if ((now - last) > 1000) {	/* every second */
-      putc ('.');
-      last = now;
-    }
-  }
-
- DONE:
-  /* reset to read mode */
-  addr = (volatile unsigned long *)info->start[0];
-  addr[0] = 0x00F000F0;	/* reset bank */
-
-  printf (" done\n");
-  return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-  ulong cp, wp, data;
-  int i, l, rc;
-
-  wp = (addr & ~3);	/* get lower word aligned address */
-
-  /*
-   * handle unaligned start bytes
-   */
-  if ((l = addr - wp) != 0) {
-    data = 0;
-    for (i=0, cp=wp; i<l; ++i, ++cp) {
-      data = (data << 8) | (*(uchar *)cp);
-    }
-    for (; i<4 && cnt>0; ++i) {
-      data = (data << 8) | *src++;
-      --cnt;
-      ++cp;
-    }
-    for (; cnt==0 && i<4; ++i, ++cp) {
-      data = (data << 8) | (*(uchar *)cp);
-    }
-
-    if ((rc = write_word(info, wp, data)) != 0) {
-      return (rc);
-    }
-    wp += 4;
-  }
-
-  /*
-   * handle word aligned part
-   */
-  while (cnt >= 4) {
-    data = 0;
-    for (i=0; i<4; ++i) {
-      data = (data << 8) | *src++;
-    }
-    if ((rc = write_word(info, wp, data)) != 0) {
-      return (rc);
-    }
-    wp  += 4;
-    cnt -= 4;
-  }
-
-  if (cnt == 0) {
-    return (0);
-  }
-
-  /*
-   * handle unaligned tail bytes
-   */
-  data = 0;
-  for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-    data = (data << 8) | *src++;
-    --cnt;
-  }
-  for (; i<4; ++i, ++cp) {
-    data = (data << 8) | (*(uchar *)cp);
-  }
-
-  return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-  vu_long *addr = (vu_long*)(info->start[0]);
-  ulong start;
-  int flag;
-
-  /* Check if Flash is (sufficiently) erased */
-  if ((*((vu_long *)dest) & data) != data) {
-    return (2);
-  }
-  /* Disable interrupts which might cause a timeout here */
-  flag = disable_interrupts();
-
-  addr[0x0555] = 0x00AA00AA;
-  addr[0x02AA] = 0x00550055;
-  addr[0x0555] = 0x00A000A0;
-
-  *((vu_long *)dest) = data;
-
-  /* re-enable interrupts if necessary */
-  if (flag)
-    enable_interrupts();
-
-  /* data polling for D7 */
-  start = get_timer (0);
-  while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-    if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-      return (1);
-    }
-  }
-  return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds
deleted file mode 100644
index c0f107319e..0000000000
--- a/board/siemens/IAD210/u-boot.lds
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/libmpc8xx.o	(.text*)
-    net/libnet.o			(.text*)
-    drivers/rtc/librtc.o		(.text*)
-
-    . = env_offset;
-    common/env_embedded.o		(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	#include <u-boot.lst>
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/siemens/SCM/Makefile b/board/siemens/SCM/Makefile
deleted file mode 100644
index 07db9d44e5..0000000000
--- a/board/siemens/SCM/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common $(obj)../../tqc/tqm8xx)
-endif
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= scm.o flash.o fpga_scm.o ../common/fpga.o \
-	  ../../tqc/tqm8xx/load_sernum_ethaddr.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/siemens/SCM/flash.c b/board/siemens/SCM/flash.c
deleted file mode 100644
index 4a6d5382be..0000000000
--- a/board/siemens/SCM/flash.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Flash Routines for AMD devices on the TQM8260 board
- *
- *--------------------------------------------------------------------
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#define V_ULONG(a)	(*(volatile unsigned long *)( a ))
-#define V_BYTE(a)	(*(volatile unsigned char *)( a ))
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/*-----------------------------------------------------------------------
- */
-void flash_reset (void)
-{
-	if (flash_info[0].flash_id != FLASH_UNKNOWN) {
-		V_ULONG (flash_info[0].start[0]) = 0x00F000F0;
-		V_ULONG (flash_info[0].start[0] + 4) = 0x00F000F0;
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-ulong flash_get_size (ulong baseaddr, flash_info_t * info)
-{
-	short i;
-	unsigned long flashtest_h, flashtest_l;
-
-	/* Write auto select command sequence and test FLASH answer */
-	V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (baseaddr + ((ulong) 0x02AA << 3)) = 0x00550055;
-	V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00900090;
-	V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (baseaddr + 4 + ((ulong) 0x02AA << 3)) = 0x00550055;
-	V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00900090;
-
-	flashtest_h = V_ULONG (baseaddr);	/* manufacturer ID     */
-	flashtest_l = V_ULONG (baseaddr + 4);
-
-	switch ((int) flashtest_h) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash     */
-	}
-
-	flashtest_h = V_ULONG (baseaddr + 8);	/* device ID           */
-	flashtest_l = V_ULONG (baseaddr + 12);
-	if (flashtest_h != flashtest_l) {
-		info->flash_id = FLASH_UNKNOWN;
-	} else {
-		switch (flashtest_h) {
-		case AMD_ID_LV800T:
-			info->flash_id += FLASH_AM800T;
-			info->sector_count = 19;
-			info->size = 0x00400000;
-			break;			/* 4 * 1 MB = 4 MB  */
-		case AMD_ID_LV800B:
-			info->flash_id += FLASH_AM800B;
-			info->sector_count = 19;
-			info->size = 0x00400000;
-			break;			/* 4 * 1 MB = 4 MB  */
-		case AMD_ID_LV160T:
-			info->flash_id += FLASH_AM160T;
-			info->sector_count = 35;
-			info->size = 0x00800000;
-			break;			/* 4 * 2 MB = 8 MB  */
-		case AMD_ID_LV160B:
-			info->flash_id += FLASH_AM160B;
-			info->sector_count = 35;
-			info->size = 0x00800000;
-			break;			/* 4 * 2 MB = 8 MB  */
-		case AMD_ID_DL322T:
-			info->flash_id += FLASH_AMDL322T;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_DL322B:
-			info->flash_id += FLASH_AMDL322B;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_DL323T:
-			info->flash_id += FLASH_AMDL323T;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_DL323B:
-			info->flash_id += FLASH_AMDL323B;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_LV640U:
-			info->flash_id += FLASH_AM640U;
-			info->sector_count = 128;
-			info->size = 0x02000000;
-			break;			/* 4 * 8 MB = 32 MB */
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			return (0);		/* no or unknown flash     */
-		}
-	}
-
-	if (flashtest_h == AMD_ID_LV640U) {
-
-		/* set up sector start adress table (uniform sector type) */
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = baseaddr + (i * 0x00040000);
-
-	} else if (info->flash_id & FLASH_BTYPE) {
-
-		/* set up sector start adress table (bottom sector type) */
-		info->start[0] = baseaddr + 0x00000000;
-		info->start[1] = baseaddr + 0x00010000;
-		info->start[2] = baseaddr + 0x00018000;
-		info->start[3] = baseaddr + 0x00020000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000;
-		}
-
-	} else {
-
-		/* set up sector start adress table (top sector type) */
-		i = info->sector_count - 1;
-		info->start[i--] = baseaddr + info->size - 0x00010000;
-		info->start[i--] = baseaddr + info->size - 0x00018000;
-		info->start[i--] = baseaddr + info->size - 0x00020000;
-		for (; i >= 0; i--) {
-			info->start[i] = baseaddr + i * 0x00040000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		if ((V_ULONG (info->start[i] + 16) & 0x00010001) ||
-			(V_ULONG (info->start[i] + 20) & 0x00010001)) {
-			info->protect[i] = 1;	/* D0 = 1 if protected */
-		} else {
-			info->protect[i] = 0;
-		}
-	}
-
-	flash_reset ();
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
-	unsigned long size_b0 = 0;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here (only one bank) */
-
-	size_b0 = flash_get_size (CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
-	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-				size_b0, size_b0 >> 20);
-	}
-
-	/*
-	 * protect monitor and environment sectors
-	 */
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_MONITOR_BASE,
-		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-# endif
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_ENV_ADDR,
-		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
-	return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf ("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf ("FUJITSU ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM800T:
-		printf ("29LV800T (8 M, top sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf ("29LV800T (8 M, bottom sector)\n");
-		break;
-	case FLASH_AM160T:
-		printf ("29LV160T (16 M, top sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf ("29LV160B (16 M, bottom sector)\n");
-		break;
-	case FLASH_AMDL322T:
-		printf ("29DL322T (32 M, top sector)\n");
-		break;
-	case FLASH_AMDL322B:
-		printf ("29DL322B (32 M, bottom sector)\n");
-		break;
-	case FLASH_AMDL323T:
-		printf ("29DL323T (32 M, top sector)\n");
-		break;
-	case FLASH_AMDL323B:
-		printf ("29DL323B (32 M, bottom sector)\n");
-		break;
-	case FLASH_AM640U:
-		printf ("29LV640D (64 M, uniform sector)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00800080;
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00800080;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
-	udelay (1000);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			V_ULONG (info->start[sect]) = 0x00300030;
-			V_ULONG (info->start[sect] + 4) = 0x00300030;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last = start;
-	while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 ||
-	       (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080)
-	{
-		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			serial_putc ('.');
-			last = now;
-		}
-	}
-
-  DONE:
-	/* reset to read mode */
-	flash_reset ();
-
-	printf (" done\n");
-	return 0;
-}
-
-static int write_dword (flash_info_t *, ulong, unsigned char *);
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong dp;
-	static unsigned char bb[8];
-	int i, l, rc, cc = cnt;
-
-	dp = (addr & ~7);		/* get lower dword aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - dp) != 0) {
-		for (i = 0; i < 8; i++)
-			bb[i] = (i < l || (i - l) >= cc) ? V_BYTE (dp + i) : *src++;
-		if ((rc = write_dword (info, dp, bb)) != 0) {
-			return (rc);
-		}
-		dp += 8;
-		cc -= 8 - l;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cc >= 8) {
-		if ((rc = write_dword (info, dp, src)) != 0) {
-			return (rc);
-		}
-		dp += 8;
-		src += 8;
-		cc -= 8;
-	}
-
-	if (cc <= 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	for (i = 0; i < 8; i++) {
-		bb[i] = (i < cc) ? *src++ : V_BYTE (dp + i);
-	}
-	return (write_dword (info, dp, bb));
-}
-
-/*-----------------------------------------------------------------------
- * Write a dword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
-{
-	ulong start, cl, ch;
-	int flag, i;
-
-	for (ch = 0, i = 0; i < 4; i++)
-		ch = (ch << 8) + *pdata++;	/* high word    */
-	for (cl = 0, i = 0; i < 4; i++)
-		cl = (cl << 8) + *pdata++;	/* low word */
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *) dest) & ch) != ch
-		|| (*((vu_long *) (dest + 4)) & cl) != cl) {
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00A000A0;
-	V_ULONG (dest) = ch;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00A000A0;
-	V_ULONG (dest + 4) = cl;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) ||
-		   ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) {
-		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
diff --git a/board/siemens/SCM/fpga_scm.c b/board/siemens/SCM/fpga_scm.c
deleted file mode 100644
index acd9c1570f..0000000000
--- a/board/siemens/SCM/fpga_scm.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <mpc8260.h>
-#include <common.h>
-#include "../common/fpga.h"
-
-fpga_t fpga_list[] = {
-	{"FIOX", CONFIG_SYS_FIOX_BASE,
-	 CONFIG_SYS_PD_FIOX_INIT, CONFIG_SYS_PD_FIOX_PROG, CONFIG_SYS_PD_FIOX_DONE}
-	,
-	{"FDOHM", CONFIG_SYS_FDOHM_BASE,
-	 CONFIG_SYS_PD_FDOHM_INIT, CONFIG_SYS_PD_FDOHM_PROG, CONFIG_SYS_PD_FDOHM_DONE}
-};
-int fpga_count = sizeof (fpga_list) / sizeof (fpga_t);
-
-
-ulong fpga_control (fpga_t * fpga, int cmd)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	switch (cmd) {
-	case FPGA_INIT_IS_HIGH:
-		immr->im_ioport.iop_pdird &= ~fpga->init_mask;	/* input */
-		return (immr->im_ioport.iop_pdatd & fpga->init_mask) ? 1 : 0;
-
-	case FPGA_INIT_SET_LOW:
-		immr->im_ioport.iop_pdird |= fpga->init_mask;	/* output */
-		immr->im_ioport.iop_pdatd &= ~fpga->init_mask;
-		break;
-
-	case FPGA_INIT_SET_HIGH:
-		immr->im_ioport.iop_pdird |= fpga->init_mask;	/* output */
-		immr->im_ioport.iop_pdatd |= fpga->init_mask;
-		break;
-
-	case FPGA_PROG_SET_LOW:
-		immr->im_ioport.iop_pdatd &= ~fpga->prog_mask;
-		break;
-
-	case FPGA_PROG_SET_HIGH:
-		immr->im_ioport.iop_pdatd |= fpga->prog_mask;
-		break;
-
-	case FPGA_DONE_IS_HIGH:
-		return (immr->im_ioport.iop_pdatd & fpga->done_mask) ? 1 : 0;
-
-	case FPGA_READ_MODE:
-		break;
-
-	case FPGA_LOAD_MODE:
-		break;
-
-	case FPGA_GET_ID:
-		if (fpga->conf_base == CONFIG_SYS_FIOX_BASE) {
-			ulong ver =
-				*(volatile ulong *) (fpga->conf_base + 0x10);
-			return ((ver >> 10) & 0xf) + ((ver >> 2) & 0xf0);
-		} else if (fpga->conf_base == CONFIG_SYS_FDOHM_BASE) {
-			return (*(volatile ushort *) fpga->conf_base) & 0xff;
-		} else {
-			return *(volatile ulong *) fpga->conf_base;
-		}
-
-	case FPGA_INIT_PORTS:
-		immr->im_ioport.iop_ppard &= ~fpga->init_mask;	/* INIT I/O */
-		immr->im_ioport.iop_psord &= ~fpga->init_mask;
-		immr->im_ioport.iop_pdird &= ~fpga->init_mask;
-
-		immr->im_ioport.iop_ppard &= ~fpga->prog_mask;	/* PROG Output */
-		immr->im_ioport.iop_psord &= ~fpga->prog_mask;
-		immr->im_ioport.iop_pdird |= fpga->prog_mask;
-
-		immr->im_ioport.iop_ppard &= ~fpga->done_mask;	/* DONE Input */
-		immr->im_ioport.iop_psord &= ~fpga->done_mask;
-		immr->im_ioport.iop_pdird &= ~fpga->done_mask;
-
-		break;
-
-	}
-	return 0;
-}
diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c
deleted file mode 100644
index 461b56e3ff..0000000000
--- a/board/siemens/SCM/scm.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <linux/compiler.h>
-
-#include "scm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void config_scoh_cs(void);
-extern int  fpga_init(void);
-
-#if 0
-#define DEBUGF(fmt,args...)   printf (fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII COL */
-	/* PA30 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII CRS */
-	/* PA29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_ER */
-	/* PA28 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_EN */
-	/* PA27 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_DV */
-	/* PA26 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_ER */
-	/* PA25 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA24 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA23 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA22 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA21 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[3] */
-	/* PA20 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[2] */
-	/* PA19 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[1] */
-	/* PA18 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[0] */
-	/* PA17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[0] */
-	/* PA16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[1]*/
-	/* PA15 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[2] */
-	/* PA14 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[3] */
-	/* PA13 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA12 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA11 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA10 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA9  */ {   1,   1,   1,   1,   0,   0   }, /* TDM_A1 L1TXD0 */
-	/* PA8  */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A1 L1RXD0 */
-	/* PA7  */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A1 L1TSYNC */
-	/* PA6  */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A1 L1RSYNC */
-	/* PA5  */ {   1,   0,   0,   0,   0,   0   }, /* FIOX_FPGA_PR */
-	/* PA4  */ {   1,   0,   0,   0,   0,   0   }, /* DOHM_FPGA_PR */
-	/* PA3  */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK4 */
-	/* PA2  */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK4 */
-	/* PA1  */ {   0,   0,   0,   1,   0,   0   },
-	/* PA0  */ {   1,   0,   0,   0,   0,   0   }  /* BUSY */
-    },
-
-    /* Port B configuration */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   0,   0,   1,   0,   0   }, /* EQ_ALARM_MIN */
-	/* PB30 */ {   1,   0,   0,   1,   0,   0   }, /* EQ_ALARM_MAJ */
-	/* PB29 */ {   1,   0,   0,   1,   0,   0   }, /* COM_ALARM_MIN */
-	/* PB28 */ {   1,   0,   0,   1,   0,   0   }, /* COM_ALARM_MAJ */
-	/* PB27 */ {   0,   1,   0,   0,   0,   0   },
-	/* PB26 */ {   0,   1,   0,   0,   0,   0   },
-	/* PB25 */ {   1,   0,   0,   1,   0,   0   }, /* LED_GREEN_L */
-	/* PB24 */ {   1,   0,   0,   1,   0,   0   }, /* LED_RED_L */
-	/* PB23 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1TXD */
-	/* PB22 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1RXD */
-	/* PB21 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1TSYNC */
-	/* PB20 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1RSYNC */
-	/* PB19 */ {   1,   0,   0,   0,   0,   0   }, /* UID */
-	/* PB18 */ {   0,   1,   0,   0,   0,   0   },
-	/* PB17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_DV */
-	/* PB16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_ER */
-	/* PB15 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_ER */
-	/* PB14 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_EN */
-	/* PB13 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII COL */
-	/* PB12 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII CRS */
-	/* PB11 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[3] */
-	/* PB10 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[2] */
-	/* PB9  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[1] */
-	/* PB8  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[0] */
-	/* PB7  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[3] */
-	/* PB6  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[2] */
-	/* PB5  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[1] */
-	/* PB4  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[0] */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C configuration */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PC31 */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK1 */
-	/* PC30 */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK1 */
-	/* PC29 */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK3 */
-	/* PC28 */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK3 */
-	/* PC27 */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK2 */
-	/* PC26 */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK2 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   },
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   },
-	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII TX_CLK */
-	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RX_CLK */
-	/* PC19 */ {   0,   1,   0,   0,   0,   0   },
-	/* PC18 */ {   0,   1,   0,   0,   0,   0   },
-	/* PC17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_CLK */
-	/* PC16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII TX_CLK */
-	/* PC15 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   },
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* RES_PHY_L */
-	/* PC12 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC10 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC9  */ {   0,   1,   1,   0,   0,   0   }, /* TDM_A2 L1TSYNC */
-	/* PC8  */ {   0,   0,   0,   0,   0,   0   }, /* FEP_RDY */
-	/* PC7  */ {   0,   0,   0,   0,   0,   0   },
-	/* PC6  */ {   0,   0,   0,   0,   0,   0   }, /* UC4_ALARM_L */
-	/* PC5  */ {   0,   0,   0,   0,   0,   0   }, /* UC3_ALARM_L */
-	/* PC4  */ {   0,   0,   0,   0,   0,   0   }, /* UC2_ALARM_L */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* RES_MISC_L */
-	/* PC2  */ {   0,   0,   0,   1,   0,   0   }, /* RES_OH_L */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* RES_DOHM_L */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* RES_FIOX_L */
-    },
-
-    /* Port D configuration */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   0,   0,   0,   0,   0,   0   }, /* INIT_F */
-	/* PD28 */ {   0,   0,   0,   1,   0,   0   }, /* DONE_F */
-	/* PD27 */ {   0,   0,   0,   0,   0,   0   }, /* INIT_D */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* DONE_D */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   },
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   },
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   },
-	/* PD22 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A2 L1TXD */
-	/* PD21 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A2 L1RXD */
-	/* PD20 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A2 L1RSYNC */
-	/* PD19 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPISEL */
-	/* PD18 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPICLK */
-	/* PD17 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPIMOSI */
-	/* PD16 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPIMOSO */
-#if defined(CONFIG_SOFT_I2C)
-	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
-	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
-	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
-#else /* normal I/O port pins */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SCL */
-#endif
-#endif
-	/* PD13 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1TXD */
-	/* PD12 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1RXD */
-	/* PD11 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1TSYNC */
-	/* PD10 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1RSYNC */
-	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   },
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   },
-	/* PD5  */ {   0,   0,   0,   1,   0,   0   }, /* PROG_F */
-	/* PD4  */ {   0,   0,   0,   1,   0,   0   }, /* PROG_D */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof (str));
-
-	puts ("Board: ");
-
-	if (!i || strncmp (str, "TQM8260", 7)) {
-		puts ("### No HW ID - assuming TQM8260\n");
-		return (0);
-	}
-
-	puts (str);
-	putc ('\n');
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
-						  ulong orx, volatile uchar * base)
-{
-	volatile uchar c = 0xff;
-	volatile uint *sdmr_ptr;
-	volatile uint *orx_ptr;
-	ulong maxsize, size;
-	int i;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
-
-	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
-	 * we are configuring CS1 if base != 0
-	 */
-	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
-	orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
-	*orx_ptr = orx;
-
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
-	 */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
-	*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++)
-		*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*base = c;
-
-	size = get_ram_size((long *)base, maxsize);
-
-	*orx_ptr = orx | ~(size - 1);
-
-	return (size);
-}
-
-/*
- * Test Power-On-Reset.
- */
-int power_on_reset (void)
-{
-	/* Test Reset Status Register */
-	return gd->reset_status & RSR_CSRS ? 0 : 1;
-}
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CONFIG_SYS_RAMBOOT
-	long size8, size9;
-#endif
-	long psize, lsize;
-
-	psize = 16 * 1024 * 1024;
-	lsize = 0;
-
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#if 0							/* Just for debugging */
-#define	prt_br_or(brX,orX) do {				\
-    ulong start =  memctl->memc_ ## brX & 0xFFFF8000;	\
-    ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF;	\
-    printf ("\n"					\
-	    #brX " 0x%08x  " #orX " 0x%08x "		\
-	    "==> 0x%08lx ... 0x%08lx = %ld MB\n",	\
-	memctl->memc_ ## brX, memctl->memc_ ## orX,	\
-	start, start+sizem, (sizem+1)>>20);		\
-    } while (0)
-	prt_br_or (br0, or0);
-	prt_br_or (br1, or1);
-	prt_br_or (br2, or2);
-	prt_br_or (br3, or3);
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-	/* 60x SDRAM setup:
-	 */
-	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE);
-
-	if (size8 < size9) {
-		psize = size9;
-		printf ("(60x:9COL - %ld MB, ", psize >> 20);
-	} else {
-		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-		printf ("(60x:8COL - %ld MB, ", psize >> 20);
-	}
-
-	/* Local SDRAM setup:
-	 */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
-	memctl->memc_lsrt = CONFIG_SYS_LSRT;
-	size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
-					  (uchar *) SDRAM_BASE2_PRELIM);
-	size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
-					  (uchar *) SDRAM_BASE2_PRELIM);
-
-	if (size8 < size9) {
-		lsize = size9;
-		printf ("Local:9COL - %ld MB) using ", lsize >> 20);
-	} else {
-		lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
-						  (uchar *) SDRAM_BASE2_PRELIM);
-		printf ("Local:8COL - %ld MB) using ", lsize >> 20);
-	}
-
-#if 0
-	/* Set up BR2 so that the local SDRAM goes
-	 * right after the 60x SDRAM
-	 */
-	memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
-			(CONFIG_SYS_SDRAM_BASE + psize);
-#endif
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	icache_enable ();
-
-	config_scoh_cs ();
-
-	return (psize);
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void config_scoh_cs (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immr->im_memctl;
-	volatile can_reg_t *can = (volatile can_reg_t *) CONFIG_SYS_CAN0_BASE;
-	__maybe_unused volatile uint tmp, i;
-
-	/* Initialize OR3 / BR3 for CAN Bus Controller 0 */
-	memctl->memc_or3 = CONFIG_SYS_CAN0_OR3;
-	memctl->memc_br3 = CONFIG_SYS_CAN0_BR3;
-	/* Initialize OR4 / BR4 for CAN Bus Controller 1 */
-	memctl->memc_or4 = CONFIG_SYS_CAN1_OR4;
-	memctl->memc_br4 = CONFIG_SYS_CAN1_BR4;
-
-	/* Initialize MAMR to write in the array at address 0x0 */
-	memctl->memc_mamr = 0x00 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
-
-	/* Initialize UPMA for CAN: single read */
-	memctl->memc_mdr = 0xcffeec00;
-	udelay (1);					/* Necessary to have the data correct in the UPM array!!!! */
-	/* The read on the CAN controller write the data of mdr in UPMA array. */
-	/* The index to the array will be incremented automatically
-	   through this read */
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcfc00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcfc00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0xfffdec07;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-
-	/* Initialize MAMR to write in the array at address 0x18 */
-	memctl->memc_mamr = 0x18 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
-
-	/* Initialize UPMA for CAN: single write */
-	memctl->memc_mdr = 0xfcffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00ffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00ffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00ffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00ffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00fffc00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00fffc00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x30ffec07;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	/* Initialize MAMR */
-	memctl->memc_mamr = MxMR_GPL_x4DIS;	/* GPL_B4 ouput line Disable */
-
-
-	/* Initialize OR5 / BR5 for the extended EEPROM Bank0 */
-	memctl->memc_or5 = CONFIG_SYS_EXTPROM_OR5;
-	memctl->memc_br5 = CONFIG_SYS_EXTPROM_BR5;
-	/* Initialize OR6 / BR6 for the extended EEPROM Bank1 */
-	memctl->memc_or6 = CONFIG_SYS_EXTPROM_OR6;
-	memctl->memc_br6 = CONFIG_SYS_EXTPROM_BR6;
-
-	/* Initialize OR7 / BR7 for the Glue Logic */
-	memctl->memc_or7 = CONFIG_SYS_FIOX_OR7;
-	memctl->memc_br7 = CONFIG_SYS_FIOX_BR7;
-
-	/* Initialize OR8 / BR8 for the DOH Logic */
-	memctl->memc_or8 = CONFIG_SYS_FDOHM_OR8;
-	memctl->memc_br8 = CONFIG_SYS_FDOHM_BR8;
-
-	DEBUGF ("OR0 %08x   BR0 %08x\n", memctl->memc_or0, memctl->memc_br0);
-	DEBUGF ("OR1 %08x   BR1 %08x\n", memctl->memc_or1, memctl->memc_br1);
-	DEBUGF ("OR2 %08x   BR2 %08x\n", memctl->memc_or2, memctl->memc_br2);
-	DEBUGF ("OR3 %08x   BR3 %08x\n", memctl->memc_or3, memctl->memc_br3);
-	DEBUGF ("OR4 %08x   BR4 %08x\n", memctl->memc_or4, memctl->memc_br4);
-	DEBUGF ("OR5 %08x   BR5 %08x\n", memctl->memc_or5, memctl->memc_br5);
-	DEBUGF ("OR6 %08x   BR6 %08x\n", memctl->memc_or6, memctl->memc_br6);
-	DEBUGF ("OR7 %08x   BR7 %08x\n", memctl->memc_or7, memctl->memc_br7);
-	DEBUGF ("OR8 %08x   BR8 %08x\n", memctl->memc_or8, memctl->memc_br8);
-
-	DEBUGF ("UPMA  addr 0x0\n");
-	memctl->memc_mamr = 0x00 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
-	for (i = 0; i < 0x8; i++) {
-		tmp = can->cpu_interface;
-		udelay (1);
-		DEBUGF (" %08x ", memctl->memc_mdr);
-	}
-	DEBUGF ("\nUPMA  addr 0x18\n");
-	memctl->memc_mamr = 0x18 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
-	for (i = 0; i < 0x8; i++) {
-		tmp = can->cpu_interface;
-		udelay (1);
-		DEBUGF (" %08x ", memctl->memc_mdr);
-	}
-	DEBUGF ("\n");
-	memctl->memc_mamr = MxMR_GPL_x4DIS;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_r (void)
-{
-	fpga_init ();
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/siemens/SCM/scm.h b/board/siemens/SCM/scm.h
deleted file mode 100644
index cb5e03e581..0000000000
--- a/board/siemens/SCM/scm.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __SCM_H
-#define __SCM_H
-
-/*----------------*/
-/* CAN Structures */
-/*----------------*/
-
-/* Message */
-struct can_msg {
-    uchar	ctrl_0;
-    uchar	ctrl_1;
-    uchar	arbit_0;
-    uchar	arbit_1;
-    uchar	arbit_2;
-    uchar	arbit_3;
-    uchar	config;
-    uchar	data[8];
-} __attribute__ ((packed));
-
-typedef struct can_msg can_msg_t;
-
-/* CAN Register */
-typedef struct can_reg {
-    uchar	ctrl;
-    uchar	status;
-    uchar	cpu_interface;
-    uchar	resv0;
-    ushort	high_speed_rd;
-    ushort	gbl_mask_std;
-    uint	gbl_mask_extd;
-    uint	msg15_mask;
-    can_msg_t	msg1;
-    uchar	clkout;
-    can_msg_t	msg2;
-    uchar	bus_config;
-    can_msg_t	msg3;
-    uchar	bit_timing_0;
-    can_msg_t	msg4;
-    uchar	bit_timing_1;
-    can_msg_t	msg5;
-    uchar	interrupt;
-    can_msg_t	msg6;
-    uchar	resv1;
-    can_msg_t	msg7;
-    uchar	resv2;
-    can_msg_t	msg8;
-    uchar	resv3;
-    can_msg_t	msg9;
-    uchar	p1conf;
-    can_msg_t	msg10;
-    uchar	p2conf;
-    can_msg_t	msg11;
-    uchar	p1in;
-    can_msg_t	msg12;
-    uchar	p2in;
-    can_msg_t	msg13;
-    uchar	p1out;
-    can_msg_t	msg14;
-    uchar	p2out;
-    can_msg_t	msg15;
-    uchar	ser_res_addr;
-    uchar	resv_cs[0x8000-0x100];	/* 0x8000 is the min size for CS */
-} can_reg_t;
-
-
-#endif /* __SCM_H */
diff --git a/board/siemens/common/README b/board/siemens/common/README
deleted file mode 100644
index 7f1c8cd62d..0000000000
--- a/board/siemens/common/README
+++ /dev/null
@@ -1,27 +0,0 @@
-CCM/SCM-Ergaenzungen fuer U-Boot und Linux:
--------------------------------------------
-
-Es gibt nun ein gemeinsames Kommando zum Laden der FPGAs:
-
-  => help fpga
-  fpga fpga status [name] - print FPGA status
-  fpga reset  [name] - reset FPGA
-  fpga load [name] addr - load FPGA configuration data
-
-Der Name kann beim CCM-Module auch weggelassen werden.
-Die Laengenangabe und damit "puma_len" ist nicht mehr
-noetig:
-
-  => fpga load puma 40600000
-  FPGA load PUMA: addr 40600000: (00000005)... done
-
-Die MTD-Partitionierung kann nun mittels "bootargs" ueber-
-geben werden:
-
-  => printenv addmtd
-  addmtd=setenv bootargs ${bootargs}
-    mtdparts=0:256k(U-Boot)ro,768k(Kernel),-(Rest)\;1:-(myJFFS2)
-
-Die Portierung auf SMC ist natuerlich noch nicht getestet.
-
-Wolfgang Grandegger (04.06.2002)
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
deleted file mode 100644
index ef8bfde7f1..0000000000
--- a/board/siemens/common/fpga.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <common.h>
-
-#include "fpga.h"
-
-int  power_on_reset(void);
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-
-static int fpga_get_version(fpga_t* fpga, char* name)
-{
-    char vname[12];
-    /*
-     * Net-list string format:
-     *     "vvvvvvvvddddddddn...".
-     *     Version Date    Name
-     *     "0000000322042002PUMA" = PUMA version 3 from 22.04.2002.
-     */
-    if (strlen(name) < (16 + strlen(fpga->name)))
-	goto failure;
-    /* Check FPGA name */
-    if (strcmp(&name[16], fpga->name) != 0)
-	goto failure;
-    /* Get version number */
-    memcpy(vname, name, 8);
-    vname[8] = '\0';
-    return simple_strtoul(vname, NULL, 16);
-
- failure:
-    printf("Image name %s is invalid\n", name);
-    return -1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static fpga_t* fpga_get(char* fpga_name)
-{
-    char name[FPGA_NAME_LEN];
-    int i;
-
-    if (strlen(fpga_name) >= FPGA_NAME_LEN)
-	goto failure;
-    for (i = 0; i < strlen(fpga_name); i++)
-	name[i] = toupper(fpga_name[i]);
-    name[i] = '\0';
-    for (i = 0; i < fpga_count; i++) {
-	if (strcmp(name, fpga_list[i].name) == 0)
-	    return &fpga_list[i];
-    }
- failure:
-    printf("FPGA: name %s is invalid\n", fpga_name);
-    return NULL;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static void fpga_status (fpga_t* fpga)
-{
-    /* Check state */
-    if (fpga_control(fpga, FPGA_DONE_IS_HIGH))
-	printf ("%s is loaded (%08lx)\n",
-		fpga->name, fpga_control(fpga, FPGA_GET_ID));
-    else
-	printf ("%s is NOT loaded\n", fpga->name);
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_RESET_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_reset (fpga_t* fpga)
-{
-    int i;
-
-    /* Set PROG to low and wait til INIT goes low */
-    fpga_control(fpga, FPGA_PROG_SET_LOW);
-    for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
-	udelay (100);
-	if (!fpga_control(fpga, FPGA_INIT_IS_HIGH))
-	    break;
-    }
-    if (i == FPGA_RESET_TIMEOUT)
-	goto failure;
-
-    /* Set PROG to high and wait til INIT goes high */
-    fpga_control(fpga, FPGA_PROG_SET_HIGH);
-    for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
-	udelay (100);
-	if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
-	    break;
-    }
-    if (i == FPGA_RESET_TIMEOUT)
-	goto failure;
-
-    return 0;
- failure:
-    return 1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_LOAD_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_load (fpga_t* fpga, ulong addr, int checkall)
-{
-    volatile uchar *fpga_addr = (volatile uchar *)fpga->conf_base;
-    image_header_t *hdr = (image_header_t *)addr;
-    ulong len;
-    uchar *data;
-    char msg[32];
-    int verify, i;
-
-#if defined(CONFIG_FIT)
-    if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
-	puts ("Non legacy image format not supported\n");
-	return -1;
-    }
-#endif
-
-    /*
-     * Check the image header and data of the net-list
-     */
-    if (!image_check_magic (hdr)) {
-	strcpy (msg, "Bad Image Magic Number");
-	goto failure;
-    }
-
-    if (!image_check_hcrc (hdr)) {
-	strcpy (msg, "Bad Image Header CRC");
-	goto failure;
-    }
-
-    data = (uchar*)image_get_data (hdr);
-    len  = image_get_data_size (hdr);
-
-    verify = getenv_yesno ("verify");
-    if (verify) {
-	if (!image_check_dcrc (hdr)) {
-	    strcpy (msg, "Bad Image Data CRC");
-	    goto failure;
-	}
-    }
-
-    if (checkall && fpga_get_version(fpga, image_get_name (hdr)) < 0)
-	return 1;
-
-    /* align length */
-    if (len & 1)
-	++len;
-
-    /*
-     * Reset FPGA and wait for completion
-     */
-    if (fpga_reset(fpga)) {
-	strcpy (msg, "Reset Timeout");
-	goto failure;
-    }
-
-    printf ("(%s)... ", image_get_name (hdr));
-    /*
-     * Copy data to FPGA
-     */
-    fpga_control (fpga, FPGA_LOAD_MODE);
-    while (len--) {
-	*fpga_addr = *data++;
-    }
-    fpga_control (fpga, FPGA_READ_MODE);
-
-    /*
-     * Wait for completion and check error status if timeout
-     */
-    for (i = 0; i < FPGA_LOAD_TIMEOUT; i++) {
-	udelay (100);
-	if (fpga_control (fpga, FPGA_DONE_IS_HIGH))
-	    break;
-    }
-    if (i == FPGA_LOAD_TIMEOUT) {
-	if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
-	    strcpy(msg, "Invalid Size");
-	else
-	    strcpy(msg, "CRC Error");
-	goto failure;
-    }
-
-    printf("done\n");
-    return 0;
-
- failure:
-
-    printf("ERROR: %s\n", msg);
-    return 1;
-}
-
-#if defined(CONFIG_CMD_BSP)
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-    ulong addr = 0;
-    int i;
-    fpga_t* fpga;
-
-    if (argc < 2)
-	goto failure;
-
-    if (strncmp(argv[1], "stat", 4) == 0) {		/* status */
-	if (argc == 2) {
-	    for (i = 0; i < fpga_count; i++) {
-		fpga_status (&fpga_list[i]);
-	    }
-	}
-	else if (argc == 3) {
-	    if ((fpga = fpga_get(argv[2])) == 0)
-		goto failure;
-	    fpga_status (fpga);
-	}
-	else
-	    goto failure;
-    }
-    else if (strcmp(argv[1],"load") == 0) {		/* load */
-	if (argc == 3 && fpga_count == 1) {
-	    fpga = &fpga_list[0];
-	}
-	else if (argc == 4) {
-	    if ((fpga = fpga_get(argv[2])) == 0)
-		goto failure;
-	}
-	else
-	    goto failure;
-
-	addr = simple_strtoul(argv[argc-1], NULL, 16);
-
-	printf ("FPGA load %s: addr %08lx: ",
-		fpga->name, addr);
-	fpga_load (fpga, addr, 1);
-
-    }
-    else if (strncmp(argv[1], "rese", 4) == 0) {	/* reset */
-	if (argc == 2 && fpga_count == 1) {
-	    fpga = &fpga_list[0];
-	}
-	else if (argc == 3) {
-	    if ((fpga = fpga_get(argv[2])) == 0)
-		goto failure;
-	}
-	else
-	    goto failure;
-
-	printf ("FPGA reset %s: ", fpga->name);
-	if (fpga_reset(fpga))
-	    printf ("ERROR: Timeout\n");
-	else
-	    printf ("done\n");
-    }
-    else
-	goto failure;
-
-    return 0;
-
- failure:
-    return cmd_usage(cmdtp);
-}
-
-U_BOOT_CMD(
-	fpga,	4,	1,	do_fpga,
-	"access FPGA(s)",
-	"fpga status [name] - print FPGA status\n"
-	"fpga reset  [name] - reset FPGA\n"
-	"fpga load [name] addr - load FPGA configuration data"
-);
-
-#endif
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int fpga_init (void)
-{
-    ulong addr;
-    ulong new_id, old_id = 0;
-    image_header_t *hdr;
-    fpga_t* fpga;
-    int do_load, i, j;
-    char name[16], *s;
-
-    /*
-     *  Port setup for FPGA control
-     */
-    for (i = 0; i < fpga_count; i++) {
-	fpga_control(&fpga_list[i], FPGA_INIT_PORTS);
-    }
-
-    /*
-     * Load FPGA(s): a new net-list is loaded if the FPGA is
-     * empty, Power-on-Reset or the old one is not up-to-date
-     */
-    for (i = 0; i < fpga_count; i++) {
-	fpga = &fpga_list[i];
-	printf ("%s:  ", fpga->name);
-
-	for (j = 0; j < strlen(fpga->name); j++)
-	    name[j] = tolower(fpga->name[j]);
-	name[j] = '\0';
-	sprintf(name, "%s_addr", name);
-	addr = 0;
-	if ((s = getenv(name)) != NULL)
-	    addr = simple_strtoul(s, NULL, 16);
-
-	if (!addr) {
-	    printf ("env. variable %s undefined\n", name);
-	    return 1;
-	}
-
-	hdr = (image_header_t *)addr;
-#if defined(CONFIG_FIT)
-	if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
-	   puts ("Non legacy image format not supported\n");
-	   return -1;
-	}
-#endif
-
-	if ((new_id = fpga_get_version(fpga, image_get_name (hdr))) == -1)
-	    return 1;
-
-	do_load = 1;
-
-	if (!power_on_reset() && fpga_control(fpga, FPGA_DONE_IS_HIGH)) {
-	    old_id = fpga_control(fpga, FPGA_GET_ID);
-	    if (new_id == old_id)
-		do_load = 0;
-	}
-
-	if (do_load) {
-	    printf ("loading ");
-	    fpga_load (fpga, addr, 0);
-	} else {
-	    printf ("loaded (%08lx)\n", old_id);
-	}
-    }
-
-    return 0;
-}
diff --git a/board/siemens/common/fpga.h b/board/siemens/common/fpga.h
deleted file mode 100644
index 2de25b0146..0000000000
--- a/board/siemens/common/fpga.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#ifndef _FPGA_H_
-#define _FPGA_H_
-
-#define FPGA_INIT_IS_HIGH   0
-#define FPGA_INIT_SET_HIGH  1
-#define FPGA_INIT_SET_LOW   2
-#define FPGA_PROG_SET_HIGH  3
-#define FPGA_PROG_SET_LOW   4
-#define FPGA_DONE_IS_HIGH   5
-#define	FPGA_READ_MODE      6
-#define FPGA_LOAD_MODE      7
-#define FPGA_GET_ID         8
-#define FPGA_INIT_PORTS     9
-
-#define FPGA_NAME_LEN       8
-typedef struct {
-    char  name[FPGA_NAME_LEN];
-    ulong conf_base;
-    uint  init_mask;
-    uint  prog_mask;
-    uint  done_mask;
-} fpga_t;
-
-extern fpga_t fpga_list[];
-extern int    fpga_count;
-
-ulong fpga_control (fpga_t* fpga, int cmd);
-
-#endif /* _FPGA_H_ */