summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorahaslam@baylibre.com <ahaslam@baylibre.com>2017-02-13 18:49:40 +0100
committerTom Rini <trini@konsulko.com>2017-02-17 17:24:35 -0500
commit4aac44be11a44b72a87de2ee751aa1fcd4960fef (patch)
tree80be2988559c76dc9ef9ab2c39a94b55438c8611 /board
parent7a2af751a005a08c21a697a7295dbe6f928fc980 (diff)
downloadu-boot-4aac44be11a44b72a87de2ee751aa1fcd4960fef.tar.gz
da850: Add instructions to copy AIS image to an MMC card
The da850 soc's can boot from a external mmc card, but the AIS image should be written to the correct sector. Add instructions to copy the AIS image to a MMC card. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board')
-rw-r--r--board/davinci/da8xxevm/README.da85023
1 files changed, 23 insertions, 0 deletions
diff --git a/board/davinci/da8xxevm/README.da850 b/board/davinci/da8xxevm/README.da850
index 313a1ef431..29cb4ec408 100644
--- a/board/davinci/da8xxevm/README.da850
+++ b/board/davinci/da8xxevm/README.da850
@@ -47,6 +47,29 @@ U-Boot > sf erase 0 +320000
U-Boot > tftp u-boot.ais
U-Boot > sf write c0700000 0 $filesize
+Flashing the images to MMC
+==========================
+If the boot pins are set to boot from mmc, the RBL will try to load the
+next boot stage form the first couple of sectors of an external mmc card.
+As sector 0 is usually used for storing the partition information, the
+AIS image should be written at least after the first sector, but before the
+first partition begins. (e.g: make sure to leave at least 500KB of unallocated
+space at the start of the mmc when creating the partitions)
+
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR is used by SPL, and should
+point to the sector were the u-boot image is located. (eg. After SPL)
+
+There are 2 ways to copy the AIS image to the mmc card:
+
+ 1 - Using the TI tool "uflash"
+ $ uflash -d /dev/mmcblk0 -b ./u-boot.ais -p OMAPL138 -vv
+
+ 2 - using the "dd" command
+ $ dd if=u-boot.ais of=/dev/mmcblk0 seek=117 bs=512 conv=fsync
+
+uflash writes the AIS image at offset 117. For compatibility with uflash,
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR is set to take into account this
+offset, and the dd command is adjusted accordingly.
Recovery
========