Merge tag 'uniphier-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2020.10

 - remove workaround for Cortex-A72

 - increase U-Boot proper size to 2MB

 - sync DT with Linux

 - add system bus controller driver

 - improve serial driver

 - add reset assertion to Denali NAND driver

3 files changed, 19 insertions, 1 deletions

diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 15e90291de..ab91db8546 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1220,6 +1220,17 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
 	return 0;
 }
 
+int denali_wait_reset_complete(struct denali_nand_info *denali)
+{
+	u32 irq_status;
+
+	irq_status = denali_wait_for_irq(denali, INTR__RST_COMP);
+	if (!(irq_status & INTR__RST_COMP))
+		return -EIO;
+
+	return 0;
+}
+
 int denali_init(struct denali_nand_info *denali)
 {
 	struct nand_chip *chip = &denali->nand;
diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h
index 019deda094..6cd02b2e26 100644
--- a/drivers/mtd/nand/raw/denali.h
+++ b/drivers/mtd/nand/raw/denali.h
@@ -321,6 +321,7 @@ struct denali_nand_info {
 #define DENALI_CAP_DMA_64BIT			BIT(1)
 
 int denali_calc_ecc_bytes(int step_size, int strength);
+int denali_wait_reset_complete(struct denali_nand_info *denali);
 int denali_init(struct denali_nand_info *denali);
 
 #endif /* __DENALI_H__ */
diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c
index 2728e8098f..8318ff507f 100644
--- a/drivers/mtd/nand/raw/denali_dt.c
+++ b/drivers/mtd/nand/raw/denali_dt.c
@@ -148,6 +148,8 @@ static int denali_dt_probe(struct udevice *dev)
 	if (ret) {
 		dev_warn(dev, "Can't get reset: %d\n", ret);
 	} else {
+		reset_assert_bulk(&resets);
+		udelay(2);
 		reset_deassert_bulk(&resets);
 
 		/*
@@ -155,7 +157,11 @@ static int denali_dt_probe(struct udevice *dev)
 		 * kicked (bootstrap process). The driver must wait until it is
 		 * finished. Otherwise, it will result in unpredictable behavior.
 		 */
-		udelay(200);
+		ret = denali_wait_reset_complete(denali);
+		if (ret) {
+			dev_err(denali->dev, "reset not completed.\n");
+			return ret;
+		}
 	}
 
 	return denali_init(denali);