doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

4 files changed, 7 insertions, 7 deletions

diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index 5da3515f5f..c66cd756d9 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -76,7 +76,7 @@ pci_dev_t dm_pci_get_bdf(const struct udevice *dev)
 /**
  * pci_get_bus_max() - returns the bus number of the last active bus
  *
- * @return last bus number, or -1 if no active buses
+ * Return: last bus number, or -1 if no active buses
  */
 static int pci_get_bus_max(void)
 {
@@ -700,7 +700,7 @@ static bool pci_match_one_id(const struct pci_device_id *id,
  * @bus: Bus to check
  * @vendor: Vendor ID to check
  * @device: Device ID to check
- * @return true if the vendor/device is in the list, false if not
+ * Return: true if the vendor/device is in the list, false if not
  */
 static bool pci_need_device_pre_reloc(struct udevice *bus, uint vendor,
 				      uint device)
@@ -728,7 +728,7 @@ static bool pci_need_device_pre_reloc(struct udevice *bus, uint vendor,
  * @find_id:	Specification of the driver to find
  * @bdf:	Bus/device/function addreess - see PCI_BDF()
  * @devp:	Returns a pointer to the device created
- * @return 0 if OK, -EPERM if the device is not needed before relocation and
+ * Return: 0 if OK, -EPERM if the device is not needed before relocation and
  *	   therefore was not created, other -ve value on error
  */
 static int pci_find_and_bind_driver(struct udevice *parent,
diff --git a/drivers/pci/pci_common.c b/drivers/pci/pci_common.c
index 02a71da30f..a18251297f 100644
--- a/drivers/pci/pci_common.c
+++ b/drivers/pci/pci_common.c
@@ -236,7 +236,7 @@ int __pci_hose_phys_to_bus(struct pci_controller *hose,
  * @hose:	PCI hose of the root PCI controller
  * @phys_addr:	physical address to convert
  * @flags:	flags of pci regions
- * @return bus address if OK, 0 on error
+ * Return: bus address if OK, 0 on error
  */
 pci_addr_t pci_hose_phys_to_bus(struct pci_controller *hose,
 				phys_addr_t phys_addr,
diff --git a/drivers/pci/pci_internal.h b/drivers/pci/pci_internal.h
index 8b842f6fb4..5a4c90e619 100644
--- a/drivers/pci/pci_internal.h
+++ b/drivers/pci/pci_internal.h
@@ -39,7 +39,7 @@ void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus);
  * If the device is a bridge, downstream devices will be probed.
  *
  * @dev:	Device to configure
- * @return the maximum PCI bus number found by this device. If there are no
+ * Return: the maximum PCI bus number found by this device. If there are no
  * bridges, this just returns the device's bus number. If the device is a
  * bridge then it will return a larger number, depending on the devices on
  * that bridge. On error, returns a -ve error number.
@@ -54,7 +54,7 @@ int dm_pciauto_config_device(struct udevice *dev);
  *
  * @busnum:	PCI bus number to look up
  * @busp:	Returns PCI bus on success
- * @return 0 on success, or -ve error
+ * Return: 0 on success, or -ve error
  */
 int pci_get_bus(int busnum, struct udevice **busp);
 
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index 7bad4c82c0..f8b193058a 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -149,7 +149,7 @@ static int pci_rom_probe(struct udevice *dev, struct pci_rom_header **hdrp)
  * @ram_headerp:	Returns a pointer to the image in RAM
  * @allocedp:		Returns true if @ram_headerp was allocated and needs
  *			to be freed
- * @return 0 if OK, -ve on error. Note that @allocedp is set up regardless of
+ * Return: 0 if OK, -ve on error. Note that @allocedp is set up regardless of
  * the error state. Even if this function returns an error, it may have
  * allocated memory.
  */