diff options
| author | Konstantin Porotchkin <kostap@marvell.com> | 2018-05-25 14:20:52 +0800 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2018-05-29 08:33:05 +0200 |
| commit | f5db5979df6a6de12dcf634280d618bb32834ef9 (patch) | |
| tree | 2705c265c55a6650d6c6ce767d201df9b35564c7 /drivers/pinctrl/mvebu | |
| parent | f246648d3708c068c66409b36ddbccef7d7b0a48 (diff) | |
| download | u-boot-f5db5979df6a6de12dcf634280d618bb32834ef9.tar.gz | |
mvebu: pinctrl: Add SD/eMMC PHY selector to the driver
When the pin control driver selects SD/eMMC function for
a pin group, there is additional configuration to be done
for this case - switch the PHY to work with SDHCI interface.
This patch adds the missing functionality into the pin
control driver.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Evan Wang <xswang@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers/pinctrl/mvebu')
| -rw-r--r-- | drivers/pinctrl/mvebu/pinctrl-mvebu.c | 59 |
1 files changed, 57 insertions, 2 deletions
diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c index 583262683f..0b9c9e1d6a 100644 --- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c @@ -16,8 +16,48 @@ #include <asm/arch-armada8k/soc-info.h> #include "pinctrl-mvebu.h" +#define AP_EMMC_PHY_CTRL_REG 0x100 +#define CP_EMMC_PHY_CTRL_REG 0x424 +#define EMMC_PHY_CTRL_SDPHY_EN BIT(0) + +#define AP806_EMMC_CLK_PIN_ID 0 +#define AP806_EMMC_CLK_FUNC 0x1 +#define CP110_EMMC_CLK_PIN_ID 56 +#define CP110_EMMC_CLK_FUNC 0xe + DECLARE_GLOBAL_DATA_PTR; +/* mvebu_pinctl_emmc_set_mux: configure sd/mmc PHY mux + * To enable SDIO/eMMC in Armada-APN806/CP110, need to configure PHY mux. + * eMMC/SD PHY register responsible for muxing between MPPs and SD/eMMC + * controller: + * - Bit0 enabled SDIO/eMMC PHY is used as a MPP muxltiplexer, + * - Bit0 disabled SDIO/eMMC PHY is connected to SDIO/eMMC controller + * If pin function is set to eMMC/SD, then configure the eMMC/SD PHY + * muxltiplexer register to be on SDIO/eMMC controller + */ +void mvebu_pinctl_emmc_set_mux(struct udevice *dev, u32 pin, u32 func) +{ + const void *blob = gd->fdt_blob; + int node = dev_of_offset(dev); + struct mvebu_pinctrl_priv *priv = dev_get_priv(dev); + + if (!fdt_node_check_compatible(blob, node, "marvell,ap806-pinctrl")) { + if ((pin == AP806_EMMC_CLK_PIN_ID) && + (func == AP806_EMMC_CLK_FUNC)) { + clrbits_le32(priv->base_reg + AP_EMMC_PHY_CTRL_REG, + EMMC_PHY_CTRL_SDPHY_EN); + } + } else if (!fdt_node_check_compatible(blob, node, + "marvell,armada-8k-cpm-pinctrl")) { + if ((pin == CP110_EMMC_CLK_PIN_ID) && + (func == CP110_EMMC_CLK_FUNC)) { + clrbits_le32(priv->base_reg + CP_EMMC_PHY_CTRL_REG, + EMMC_PHY_CTRL_SDPHY_EN); + } + } +} + /* * mvebu_pinctrl_set_state: configure pin functions. * @dev: the pinctrl device to be configured. @@ -47,9 +87,16 @@ int mvebu_pinctrl_set_state(struct udevice *dev, struct udevice *config) function = fdtdec_get_int(blob, node, "marvell,function", 0xff); + /* + * Check if setup of PHY mux is needed for this pins group. + * Only the first pin id in array is tested, all the rest use the same + * pin function. + */ + mvebu_pinctl_emmc_set_mux(dev, pin_arr[0], function); + for (i = 0; i < pin_count; i++) { - int reg_offset; - int field_offset; + int reg_offset; + int field_offset; int pin = pin_arr[i]; if (function > priv->max_func) { @@ -96,6 +143,14 @@ static int mvebu_pinctrl_set_state_all(struct udevice *dev, return -EINVAL; } + /* Check if setup of PHY mux is needed for this pins group. */ + if (priv->pin_cnt < CP110_EMMC_CLK_PIN_ID) + mvebu_pinctl_emmc_set_mux(dev, AP806_EMMC_CLK_PIN_ID, + func_arr[AP806_EMMC_CLK_PIN_ID]); + else + mvebu_pinctl_emmc_set_mux(dev, CP110_EMMC_CLK_PIN_ID, + func_arr[CP110_EMMC_CLK_PIN_ID]); + for (pin = 0; pin < priv->pin_cnt; pin++) { int reg_offset; int field_offset; |