diff options
| author | Mark Kettenis <kettenis@openbsd.org> | 2020-04-27 11:09:47 +0200 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2020-06-15 16:37:01 -0400 |
| commit | e88d6979d1fa0a11468204fa729229afc49d5bde (patch) | |
| tree | 154f1aeb54e7aab20b14cbd11e0cfa19f68b1e93 /drivers/power | |
| parent | 287be3294af6179782f8a561afca427620504581 (diff) | |
| download | u-boot-e88d6979d1fa0a11468204fa729229afc49d5bde.tar.gz | |
regulator: fix: enable gpio when requested
The fix in commit b7adcdd073c0 has the side-effect that the regulator
will be disabled when requesting the relevant gpio in
regulator_common_ofdata_to_platdata() and enabled in
regulator_pre_probe() when the regulator was already enabled.
This leads to a short interruption in the 3.3V power to the PCIe
slot on the firefly-rk3399 which makes an ADATA SX8000NP NVMe SSD
unhappy.
Fix this by setting the GPIOD_IS_OUT_ACTIVE flag again when the
'regulator-boot-on' property is set, but check for this property
explicitly instead of relying on the "boot_on" member of
the uclass platdata.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/regulator/regulator-uclass.c | 3 | ||||
| -rw-r--r-- | drivers/power/regulator/regulator_common.c | 2 |
2 files changed, 2 insertions, 3 deletions
diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c index 7dcb317192..da679a572c 100644 --- a/drivers/power/regulator/regulator-uclass.c +++ b/drivers/power/regulator/regulator-uclass.c @@ -466,9 +466,6 @@ static int regulator_pre_probe(struct udevice *dev) (uc_pdata->min_uA == uc_pdata->max_uA)) uc_pdata->flags |= REGULATOR_FLAG_AUTOSET_UA; - if (uc_pdata->boot_on) - regulator_set_enable(dev, uc_pdata->boot_on); - return 0; } diff --git a/drivers/power/regulator/regulator_common.c b/drivers/power/regulator/regulator_common.c index 16d9412cd5..4cfcc31298 100644 --- a/drivers/power/regulator/regulator_common.c +++ b/drivers/power/regulator/regulator_common.c @@ -19,6 +19,8 @@ int regulator_common_ofdata_to_platdata(struct udevice *dev, if (!dev_read_bool(dev, "enable-active-high")) flags |= GPIOD_ACTIVE_LOW; + if (dev_read_bool(dev, "regulator-boot-on")) + flags |= GPIOD_IS_OUT_ACTIVE; /* Get optional enable GPIO desc */ gpio = &dev_pdata->gpio; |