Blackfin: Remove

The architecture is currently unmaintained, remove.

Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 116 deletions

diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h
deleted file mode 100644
index 1690dda519..0000000000
--- a/include/configs/dnp5370.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * U-Boot - Configuration file for SSV DNP5370 board
- */
-
-#ifndef __CONFIG_DNP5370_H__
-#define __CONFIG_DNP5370_H__
-
-/* this must come first */
-#include <asm/config-pre.h>
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_CPU       bf537-0.3
-#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
-
-/*
- * Clock Settings
- *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-#define CONFIG_CLKIN_HZ                 25000000
-#define CONFIG_CLKIN_HALF               0
-#define CONFIG_PLL_BYPASS               0
-#define CONFIG_VCO_MULT                 24
-#define CONFIG_CCLK_DIV                 1
-#define CONFIG_SCLK_DIV                 5
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH     9
-#define CONFIG_MEM_SIZE         32
-
-#define CONFIG_EBIU_SDRRC_VAL   0x03a0
-#define CONFIG_EBIU_SDBCTL_VAL  0x0013
-#define CONFIG_EBIU_SDGCTL_VAL  0x8091998d
-
-#define CONFIG_EBIU_AMGCTL_VAL  0xF7
-#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
-#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
-
-#define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN   (128 * 1024)
-
-/*
- * Network Settings
- */
-#ifndef __ADSPBF534__
-#define CONFIG_ROOTPATH        "/romfs"
-
-#define CONFIG_BFIN_MAC         1
-#define CONFIG_PHY_ADDR         0
-#define CONFIG_RMII             1
-
-#endif
-
-/*
- * Flash Settings
- *
- * Only 3 MB of the 4 MB NOR flash are addressable.
- * But limiting the flash size does not seem to work.
- * It seems the CFI detection has precedence.
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_BASE       0x20000000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS  1
-#define CONFIG_SYS_MAX_FLASH_SECT   71 /* (M29W320EB) */
-
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 15
-
-/*
- * Env Storage Settings
- */
-#define CONFIG_ENV_IS_IN_FLASH     1
-#define CONFIG_ENV_ADDR       0x20004000
-#define CONFIG_ENV_SIZE       0x00002000
-#define CONFIG_ENV_SECT_SIZE  0x00002000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET     0x00004000 /* (CONFIG_ENV_ADDR - CONFIG_FLASH_BASE) */
-
-#define ENV_IS_EMBEDDED
-#define LDS_BOARD_TEXT \
-	arch/blackfin/lib/built-in.o (.text*); \
-	arch/blackfin/cpu/built-in.o (.text*); \
-	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o (.text*);
-
-/*
- * Misc Settings
- */
-#define CONFIG_CMD_STRINGS
-#define CONFIG_MISC_INIT_R
-#define CONFIG_RTC_BFIN
-#define CONFIG_SYS_LONGHELP
-
-/* This disables the hardware watchdog (not inside the bfin) */
-#define CONFIG_DNP5370_EXT_WD_DISABLE 1
-
-#define CONFIG_UART_CONSOLE 0
-#define CONFIG_BFIN_SERIAL
-#define CONFIG_BOOTCOMMAND  "bootm 0x20030000"
-#define CONFIG_BOOTARGS     "console=ttyBF0,115200 root=/dev/mtdblock3 rootfstype=ext2"
-
-/* Convenience commands to update Linux in NOR flash */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"fetchme=tftpboot 0x01000000 uImage;" \
-		"iminfo\0" \
-	"flashme=protect off 0x20030000 0x2003ffff;" \
-		"erase 0x20030000 0x202effff;" \
-		"cp.b 0x01000000 0x20030000 0x2c0000\0" \
-	"runme=bootm 0x01000000\0"
-
-#endif