diff options
-rw-r--r-- | arch/arm/mach-omap2/am33xx/Kconfig | 32 | ||||
-rw-r--r-- | arch/arm/mach-omap2/am33xx/board.c | 8 | ||||
-rw-r--r-- | configs/am335x_evm_defconfig | 3 | ||||
-rw-r--r-- | configs/am335x_guardian_defconfig | 3 | ||||
-rw-r--r-- | include/configs/am335x_evm.h | 12 | ||||
-rw-r--r-- | include/configs/am335x_guardian.h | 5 | ||||
-rw-r--r-- | include/configs/baltos.h | 12 | ||||
-rw-r--r-- | include/configs/chiliboard.h | 4 | ||||
-rw-r--r-- | include/configs/siemens-am33x-common.h | 7 |
9 files changed, 42 insertions, 44 deletions
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 1402376915..b8e115dc92 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -280,3 +280,35 @@ config PUB_ROM_DATA_SIZE image, this area is no longer used, and can be reclaimed for run time use by the boot image. endif + +config AM335X_USB0 + bool "Static mode configuration for USB0 in SPL" + depends on AM33XX && SPL_MUSB_NEW && !SPL_OF_CONTROL + +choice + prompt "USB0 port configuration" + depends on AM335X_USB0 + +config AM335X_USB0_HOST + bool "Port is used in host mode" + +config AM335X_USB0_PERIPHERAL + bool "Port is used in peripheral mode" + +endchoice + +config AM335X_USB1 + bool "Static mode configuration for USB1 in SPL" + depends on AM33XX && SPL_MUSB_NEW && !SPL_OF_CONTROL + +choice + prompt "USB1 port configuration" + depends on AM335X_USB1 + +config AM335X_USB1_HOST + bool "Port is used in host mode" + +config AM335X_USB1_PERIPHERAL + bool "Port is used in peripheral mode" + +endchoice diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index bcc907ce36..5175eb01cb 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -241,14 +241,14 @@ static struct ti_musb_plat usb1 = { }; U_BOOT_DRVINFOS(am33xx_usbs) = { -#if CONFIG_AM335X_USB0_MODE == MUSB_PERIPHERAL +#ifdef CONFIG_AM335X_USB0_PERIPHERAL { "ti-musb-peripheral", &usb0 }, -#elif CONFIG_AM335X_USB0_MODE == MUSB_HOST +#elif defined(CONFIG_AM335X_USB0_HOST) { "ti-musb-host", &usb0 }, #endif -#if CONFIG_AM335X_USB1_MODE == MUSB_PERIPHERAL +#ifdef CONFIG_AM335X_USB1_PERIPHERAL { "ti-musb-peripheral", &usb1 }, -#elif CONFIG_AM335X_USB1_MODE == MUSB_HOST +#elif defined(CONFIG_AM335X_USB1_HOST) { "ti-musb-host", &usb1 }, #endif }; diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 535b269076..497127d406 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -4,6 +4,9 @@ CONFIG_ARCH_OMAP2PLUS=y CONFIG_TI_COMMON_CMD_OPTIONS=y CONFIG_DEFAULT_DEVICE_TREE="am335x-evm" CONFIG_AM33XX=y +CONFIG_AM335X_USB0=y +CONFIG_AM335X_USB0_PERIPHERAL=y +CONFIG_AM335X_USB1=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y CONFIG_TIMESTAMP=y diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig index ca3d01aea4..f8cc073c23 100644 --- a/configs/am335x_guardian_defconfig +++ b/configs/am335x_guardian_defconfig @@ -10,6 +10,9 @@ CONFIG_ENV_OFFSET=0x500000 CONFIG_DEFAULT_DEVICE_TREE="am335x-guardian" CONFIG_AM33XX=y CONFIG_TARGET_AM335X_GUARDIAN=y +CONFIG_AM335X_USB0=y +CONFIG_AM335X_USB0_PERIPHERAL=y +CONFIG_AM335X_USB1=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 9070845b7a..4db04ff54e 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -202,18 +202,6 @@ */ /* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* * Disable MMC DM for SPL build and can be re-enabled after adding * DM support in SPL */ diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h index 10a95a10a0..608a22db44 100644 --- a/include/configs/am335x_guardian.h +++ b/include/configs/am335x_guardian.h @@ -129,9 +129,4 @@ #endif /* CONFIG_MTD_RAW_NAND */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - #endif /* ! __CONFIG_AM335X_GUARDIAN_H */ diff --git a/include/configs/baltos.h b/include/configs/baltos.h index f4ab6640cd..b881d8c03f 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -214,18 +214,6 @@ #endif #endif -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_HOST -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_OTG - /* NAND support */ #ifdef CONFIG_MTD_RAW_NAND #define GPMC_NAND_ECC_LP_x8_LAYOUT 1 diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index fe49627263..aa2a07e910 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -127,10 +127,6 @@ #define CONFIG_SYS_NAND_ECCBYTES 14 /* NAND: SPL related configs */ -/* USB configuration */ -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - /* * Disable MMC DM for SPL build and can be re-enabled after adding * DM support in SPL diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index c3a04c2f65..bfadf4a6b8 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -104,13 +104,6 @@ */ #ifndef CONFIG_SPL_BUILD -/* - * USB configuration - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST /* USB DRACO ID as default */ #define CONFIG_USBD_HS |