diff options
Diffstat (limited to 'arch/arm/dts/fsl-imx8qxp-apalis.dts')
| -rw-r--r-- | arch/arm/dts/fsl-imx8qxp-apalis.dts | 278 |
1 files changed, 0 insertions, 278 deletions
diff --git a/arch/arm/dts/fsl-imx8qxp-apalis.dts b/arch/arm/dts/fsl-imx8qxp-apalis.dts deleted file mode 100644 index 9cb3d3a809..0000000000 --- a/arch/arm/dts/fsl-imx8qxp-apalis.dts +++ /dev/null @@ -1,278 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -/dts-v1/; - -#include "fsl-imx8qxp.dtsi" -#include "fsl-imx8qxp-apalis-u-boot.dtsi" - -/ { - model = "Toradex Apalis iMX8X"; - compatible = "toradex,apalis-imx8x", "fsl,imx8qxp"; - - chosen { - bootargs = "console=ttyLP1,115200"; - stdout-path = &lpuart1; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - }; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>, <&pinctrl_reset_moci>; - - apalis-imx8x { - /* Apalis UART1 */ - pinctrl_lpuart1: lpuart1grp { - fsl,pins = < - SC_P_UART1_RX_ADMA_UART1_RX 0x06000020 /* SODIMM 118 */ - SC_P_UART1_TX_ADMA_UART1_TX 0x06000020 /* SODIMM 112 */ - >; - }; - - /* On-module Gigabit Ethernet PHY Micrel KSZ9031 */ - pinctrl_fec1: fec1grp { - fsl,pins = < - SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x14a0 - SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x14a0 - SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 - SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 - SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61 - SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x61 - SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61 - SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61 - SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x61 - SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x61 - SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x61 - SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61 - SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61 - SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61 - SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x61 - SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x61 - /* On-module ETH_RESET# */ - SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x06000020 - /* On-module ETH_INT# */ - SC_P_ADC_IN2_LSIO_GPIO1_IO12 0x21 - >; - }; - - /* Apalis BKL_ON */ - pinctrl_gpio_bkl_on: gpio-bkl-on { - fsl,pins = < - SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 286 */ - >; - }; - - pinctrl_hog0: hog0grp { - fsl,pins = < - SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 - >; - }; - - pinctrl_hog1: hog1grp { - fsl,pins = < - /* Apalis USBO1_EN */ - SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x41 /* SODIMM 274 */ - >; - }; - - /* Apalis RESET_MOCI# */ - pinctrl_reset_moci: gpioresetmocigrp { - fsl,pins = < - SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x21 - >; - }; - - /* On-module eMMC */ - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 - SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21 - SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 - SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 - SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 - SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 - SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 - SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 - SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 - SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 - SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 - SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 - SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21 - SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 - SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 - SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 - SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 - SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 - SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 - SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 - SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 - SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 - SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 - SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21 - SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 - SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 - SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 - SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 - SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 - SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 - SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 - SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 - SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 - SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 - >; - }; - - /* Apalis MMC1_CD# */ - pinctrl_usdhc2_gpio: mmc1gpiogrp { - fsl,pins = < - SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x06000021 /* SODIMM 164 */ - >; - }; - - pinctrl_usdhc2_gpio_sleep: usdhc1gpioslpgrp { - fsl,pins = < - SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x60 /* SODIMM 164 */ - >; - }; - - /* Apalis USBH_EN */ - pinctrl_usbh_en: usbhen { - fsl,pins = < - SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x40 /* SODIMM 84 */ - >; - }; - - /* Apalis MMC1 */ - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */ - SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */ - SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */ - SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */ - SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */ - SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */ - SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */ - SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */ - SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */ - SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */ - SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */ - SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */ - SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */ - SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */ - SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */ - SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */ - SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */ - SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */ - SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_usdhc2_sleep: usdhc2slpgrp { - fsl,pins = < - SC_P_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 154 */ - SC_P_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 150 */ - SC_P_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 160 */ - SC_P_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 162 */ - SC_P_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 144 */ - SC_P_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 146 */ - SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - }; -}; - -/* Apalis Gigabit LAN */ -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - fsl,magic-packet; - phy-handle = <ðphy0>; - phy-mode = "rgmii-id"; - phy-reset-duration = <10>; - phy-reset-post-delay = <150>; - phy-reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <4>; - }; - }; -}; - -/* Apalis UART1 */ -&lpuart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart1>; - status = "okay"; -}; - -/* On-module eMMC */ -&usdhc1 { - bus-width = <8>; - non-removable; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - status = "okay"; -}; - -/* Apalis MMC1 */ -&usdhc2 { - bus-width = <4>; - cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; - disable-wp; - status = "okay"; -}; |