1 files changed, 0 insertions, 102 deletions
diff --git a/board/freescale/m5253evbe/README b/board/freescale/m5253evbe/README
deleted file mode 100644
index f4eae67fc0..0000000000
--- a/board/freescale/m5253evbe/README
+++ /dev/null
@@ -1,102 +0,0 @@
-Freescale Amadeus Plus M5253EVBE board
-======================================
-
-Hayden Fraser(Hayden.Fraser@freescale.com)
-Created 06/05/2007
-===========================================
-
-
-1. SWITCH SETTINGS
-==================
-1.1 N/A
-
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
-	linux kernel, you can customize it based on your system requirements:
-	SDR:	0x00000000-0x00ffffff
-	SRAM0:	0x20010000-0x20017fff
-	SRAM1:	0x20000000-0x2000ffff
-	MBAR1:	0x10000000-0x4fffffff
-	MBAR2:	0x80000000-0xCfffffff
-	Flash:	0xffe00000-0xffffffff
-
-3. DEFINITIONS AND COMPILATION
-==============================
-3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h
-	CONFIG_MCF52x2		Processor family
-	CONFIG_MCF5253		MCF5253 specific
-	CONFIG_SYS_CLK			Define Amadeus Plus CPU Clock
-	CONFIG_SYS_MBAR		MBAR base address
-	CONFIG_SYS_MBAR2		MBAR2 base address
-
-3.2 Compilation
-	export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf-
-	cd u-boot-1-2-x
-	make distclean
-	make M5253EVBE_config
-	make
-
-
-4. SCREEN DUMP
-==============
-4.1 U-Boot 1.2.0 (Jun 18 2007 - 18:20:00)
-
-CPU:   Freescale Coldfire MCF5253 at 62 MHz
-Board: Freescale MCF5253 EVBE
-DRAM:  16 MB
-FLASH:  2 MB
-In:    serial
-Out:   serial
-Err:   serial
-=> flinfo
-
-Bank # 1: CFI conformant FLASH (16 x 16)  Size: 2 MB in 35 Sectors
-  AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x49
-  Erase timeout: 16384 ms, write timeout: 1 ms
-
-  Sector Start Addresses:
-  FFE00000   RO   FFE04000   RO   FFE06000   RO   FFE08000   RO   FFE10000   RO
-  FFE20000        FFE30000        FFE40000        FFE50000        FFE60000
-  FFE70000        FFE80000        FFE90000        FFEA0000        FFEB0000
-  FFEC0000        FFED0000        FFEE0000        FFEF0000        FFF00000
-  FFF10000        FFF20000        FFF30000        FFF40000        FFF50000
-  FFF60000        FFF70000        FFF80000        FFF90000        FFFA0000
-  FFFB0000        FFFC0000        FFFD0000        FFFE0000        FFFF0000
-
-=> bdinfo
-boot_params = 0x00F62F90
-memstart    = 0x00000000
-memsize     = 0x01000000
-flashstart  = 0xFFE00000
-flashsize   = 0x00200000
-flashoffset = 0x00000000
-baudrate    = 19200 bps
-
-=> printenv
-bootdelay=5
-baudrate=19200
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 134/8188 bytes
-=> saveenv
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
-. done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=>
-
-5. COMPILER
------------
-To create U-Boot the CodeSourcery's version of the GNU Toolchain for the ColdFire architecture
-compiler set (freescale-coldfire-4.1-elf) from www.codesourcery.com was used.
-You can download it from:http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-compiler that you used - for example, codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M
-codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M