summaryrefslogtreecommitdiff
path: root/board/hisilicon
diff options
context:
space:
mode:
Diffstat (limited to 'board/hisilicon')
-rw-r--r--board/hisilicon/hikey960/Kconfig15
-rw-r--r--board/hisilicon/hikey960/MAINTAINERS6
-rw-r--r--board/hisilicon/hikey960/Makefile3
-rw-r--r--board/hisilicon/hikey960/README247
-rw-r--r--board/hisilicon/hikey960/hikey960.c186
5 files changed, 457 insertions, 0 deletions
diff --git a/board/hisilicon/hikey960/Kconfig b/board/hisilicon/hikey960/Kconfig
new file mode 100644
index 0000000000..89f096d649
--- /dev/null
+++ b/board/hisilicon/hikey960/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_HIKEY960
+
+config SYS_BOARD
+ default "hikey960"
+
+config SYS_VENDOR
+ default "hisilicon"
+
+config SYS_SOC
+ default "hi3660"
+
+config SYS_CONFIG_NAME
+ default "hikey960"
+
+endif
diff --git a/board/hisilicon/hikey960/MAINTAINERS b/board/hisilicon/hikey960/MAINTAINERS
new file mode 100644
index 0000000000..2c98932163
--- /dev/null
+++ b/board/hisilicon/hikey960/MAINTAINERS
@@ -0,0 +1,6 @@
+HIKEY960 BOARD
+M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+S: Maintained
+F: board/hisilicon/hikey960
+F: include/configs/hikey960.h
+F: configs/hikey960_defconfig
diff --git a/board/hisilicon/hikey960/Makefile b/board/hisilicon/hikey960/Makefile
new file mode 100644
index 0000000000..ea5a70921f
--- /dev/null
+++ b/board/hisilicon/hikey960/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y := hikey960.o
diff --git a/board/hisilicon/hikey960/README b/board/hisilicon/hikey960/README
new file mode 100644
index 0000000000..e1e330d535
--- /dev/null
+++ b/board/hisilicon/hikey960/README
@@ -0,0 +1,247 @@
+Introduction
+============
+
+HiKey960 is one of the 96Boards Consumer Edition board from HiSilicon.
+The board/SoC has: -
+* HiSilicon Kirin960 (HI3660) SoC with 4xCortex-A73 and 4xCortex-A53
+* ARM Mali G71 MP8 GPU
+* 3GB LPDDR4 SDRAM
+* 32GB UFS Flash Storage
+* microSD
+* 802.11a/b/g/n WiFi, Bluetooth
+
+More information about this board can be found in 96Boards website:
+https://www.96boards.org/product/hikey960/
+
+Currently the u-boot port supports: -
+* SD card
+
+Compile from source
+===================
+
+First get all the sources
+
+ > mkdir -p ~/hikey960/src ~/hikey960/bin
+ > cd ~/hikey960/src
+ > git clone https://github.com/ARM-software/arm-trusted-firmware
+ > git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
+ > git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
+ > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/config
+ > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hisi-sec_usb_xloader.img
+ > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hisi-sec_uce_boot.img
+ > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/sec_xloader.img
+ > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/recovery.bin
+ > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hikey_idt
+
+Get the SCP_BL2 lpm3.img binary. It is shipped as part of the UEFI source.
+The latest version can be obtained from the OpenPlatformPkg repo.
+
+ > cp OpenPlatformPkg/Platforms/Hisilicon/HiKey960/Binary/lpm3.img ~/hikey960/bin/
+
+Compile U-Boot
+==============
+
+ > cd ~/hikey960/src/u-boot
+ > make CROSS_COMPILE=aarch64-linux-gnu- hikey960_defconfig
+ > make CROSS_COMPILE=aarch64-linux-gnu-
+ > cp u-boot.bin ~/hikey960/bin/
+
+Compile ARM Trusted Firmware (ATF)
+==================================
+
+ > cd ~/hikey960/src/arm-trusted-firmware
+ > make CROSS_COMPILE=aarch64-linux-gnu- all fip \
+ SCP_BL2=~/hikey960/bin/lpm3.img \
+ BL33=~/hikey960/bin/u-boot.bin DEBUG=1 PLAT=hikey960
+
+Copy the resulting FIP binary
+ > cp build/hikey960/debug/fip.bin ~/hikey960/bin
+
+Compile l-loader
+================
+ > cd ~/hikey960/src/l-loader
+ > ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl1.bin
+ > ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl2.bin
+ > ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/fip.bin
+ > ln -sf ~/hikey960/bin/u-boot.bin
+ > make hikey960 PTABLE_LST=linux-32g NS_BL1U=u-boot.bin
+
+Copy the resulting binaries
+ > cp *.img ~/hikey960/bin
+ > cp l-loader.bin ~/hikey960/bin
+
+These instructions are adapted from
+https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey960.rst
+
+Setup Console
+=============
+
+Install ser2net. Use telnet as the console since UEFI in recovery mode
+output window fails to display in minicom.
+
+ > sudo apt-get install ser2net
+
+Configure ser2net
+
+ > sudo vi /etc/ser2net.conf
+
+Append one line for serial-over-USB in #ser2net.conf
+
+ > 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner
+
+Start ser2net
+
+ > sudo killall ser2net
+ > sudo ser2net -u
+
+Open the console.
+
+ > telnet localhost 2004
+
+And you could open the console remotely, too.
+
+Flashing
+========
+
+1. Boot Hikey960 into recovery mode as per the below document:
+https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey960/installation/board-recovery.md
+
+Once Hikey960 is in recovery mode, flash the recovery binary:
+
+ > cd ~/hikey960/src
+ > chmod +x ./hikey_idt
+ > sudo ./hikey_idt -c config -p /dev/ttyUSB1
+
+Now move to the Hikey960 console and press `f` during UEFI boot. This
+will allow the board to boot into fastboot mode. Once the board is in
+fastboot mode, you should see the ID of the HiKey960 board using the
+following command
+
+ > sudo fastboot devices
+
+1ED3822A018E3372 fastboot
+
+3. Flash the images
+
+Now, the images can be flashed using fastboot:
+
+ > sudo fastboot flash ptable ~/hikey960/bin/prm_ptable.img
+ > sudo fastboot flash xloader ~/hikey960/bin/sec_xloader.img
+ > sudo fastboot flash fastboot ~/hikey960/bin/l-loader.bin
+ > sudo fastboot flash fip ~/hikey960/bin/fip.bin
+
+4. Set the "Boot Mode" switch to OFF position for normal boot mode.
+Then power on HiKey960
+
+Observe the console traces using UART6 on the Low Speed Expansion header:
+
+NOTICE: BL2: v2.1(debug):v2.1-531-g3ee48f40
+NOTICE: BL2: Built : 18:15:58, Aug 2 2019
+INFO: BL2: Doing platform setup
+INFO: UFS LUN0 contains 1024 blocks with 4096-byte size
+INFO: UFS LUN1 contains 1024 blocks with 4096-byte size
+INFO: UFS LUN2 contains 2048 blocks with 4096-byte size
+INFO: UFS LUN3 contains 7805952 blocks with 4096-byte size
+INFO: ufs: change power mode success
+INFO: BL2: Loading image id 2
+INFO: Loading image id=2 at address 0x89c80000
+INFO: Image id=2 loaded: 0x89c80000 - 0x89cb5088
+INFO: BL2: Initiating SCP_BL2 transfer to SCP
+INFO: BL2: SCP_BL2: 0x89c80000@0x35088
+INFO: BL2: SCP_BL2 HEAD:
+INFO: BL2: SCP_BL2 0x7000 0x179 0x159 0x149
+INFO: BL2: SCP_BL2 0x189 0x18b 0x18d 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x18f
+INFO: BL2: SCP_BL2 0x191 0x0 0x193 0x195
+INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
+INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
+INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
+INFO: BL2: SCP_BL2 0x4d454355 0x43494741 0x424d554e 0x21215245
+INFO: BL2: SCP_BL2 0x4a054904 0x42912000 0xf841bfbc 0xe7fa0b04
+INFO: BL2: SCP_BL2 0xb88cf000 0x3b18 0x3d1c 0x6809493e
+INFO: BL2: SCP_BL2 0x4613680a 0x201f102 0xf0002a04 0x600a804c
+INFO: BL2: SCP_BL2 0x204f04f 0xf203fb02 0xf102440a 0x60100204
+INFO: BL2: SCP_BL2 0x160f04f 0xf103fb01 0x68004834 0x61044408
+INFO: BL2: SCP_BL2 0x61866145 0xf8c061c7 0xf8c08020 0xf8c09024
+INFO: BL2: SCP_BL2 0xf8c0a028 0xf3efb02c 0xf3ef8208 0x68118309
+INFO: BL2: SCP_BL2 0xf1026401 0xf0110204 0xbf070f04 0x46113220
+INFO: BL2: SCP_BL2 TAIL:
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x19cad151 0x19b80040 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
+INFO: BL2: SCP_BL2 transferred to SCP
+INFO: start fw loading
+INFO: fw load success
+WARNING: BL2: Platform setup already done!!
+INFO: BL2: Loading image id 3
+INFO: Loading image id=3 at address 0x1ac58000
+INFO: Image id=3 loaded: 0x1ac58000 - 0x1ac63024
+INFO: BL2: Loading image id 5
+INFO: Loading image id=5 at address 0x1ac98000
+INFO: Image id=5 loaded: 0x1ac98000 - 0x1ad0819c
+NOTICE: BL2: Booting BL31
+INFO: Entry point address = 0x1ac58000
+INFO: SPSR = 0x3cd
+NOTICE: BL31: v2.1(debug):v2.1-531-g3ee48f40
+NOTICE: BL31: Built : 18:16:01, Aug 2 2019
+INFO: ARM GICv2 driver initialized
+INFO: BL31: Initializing runtime services
+INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
+INFO: plat_setup_psci_ops: sec_entrypoint=0x1ac580fc
+INFO: BL31: Preparing for EL3 exit to normal world
+INFO: Entry point address = 0x1ac98000
+INFO: SPSR = 0x3c9
+
+
+U-Boot 2019.07-00628-g286f05a6fc-dirty (Aug 02 2019 - 17:14:05 +0530)
+Hikey960
+
+DRAM: 3 GiB
+PSCI: v1.1
+MMC: dwmmc1@ff37f000: 0
+Loading Environment from EXT4... ** File not found /uboot.env **
+
+** Unable to read "/uboot.env" from mmc0:2 **
+In: serial@fff32000
+Out: serial@fff32000
+Err: serial@fff32000
+Net: Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot: 0
+switch to partitions #0, OK
+mmc0 is current device
+Scanning mmc 0:1...
+Found /extlinux/extlinux.conf
+Retrieving file: /extlinux/extlinux.conf
+201 bytes read in 12 ms (15.6 KiB/s)
+1: hikey960-kernel
+Retrieving file: /Image
+24689152 bytes read in 4377 ms (5.4 MiB/s)
+append: earlycon=pl011,mmio32,0xfff32000 console=ttyAMA6,115200 rw root=/dev/mmcblk0p2 rot
+Retrieving file: /hi3660-hikey960.dtb
+35047 bytes read in 14 ms (2.4 MiB/s)
+## Flattened Device Tree blob at 10000000
+ Booting using the fdt blob at 0x10000000
+ Using Device Tree in place at 0000000010000000, end 000000001000b8e6
+
+Starting kernel ...
+
+[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
+[ 0.000000] Linux version 5.2.0-03138-gd75da80dce39 (mani@Mani-XPS-13-9360) (gcc versi9
+[ 0.000000] Machine model: HiKey960
+[ 0.000000] earlycon: pl11 at MMIO32 0x00000000fff32000 (options '')
+[ 0.000000] printk: bootconsole [pl11] enabled
+[ 0.000000] efi: Getting EFI parameters from FDT:
diff --git a/board/hisilicon/hikey960/hikey960.c b/board/hisilicon/hikey960/hikey960.c
new file mode 100644
index 0000000000..eb9b99eaa9
--- /dev/null
+++ b/board/hisilicon/hikey960/hikey960.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Linaro
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/hi3660.h>
+#include <asm/armv8/mmu.h>
+#include <asm/psci.h>
+#include <linux/arm-smccc.h>
+#include <linux/psci.h>
+
+#define PMIC_REG_TO_BUS_ADDR(x) (x << 2)
+#define PMIC_VSEL_MASK 0x7
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+#include <dm/platform_data/serial_pl01x.h>
+
+static const struct pl01x_serial_platdata serial_platdata = {
+ .base = HI3660_UART6_BASE,
+ .type = TYPE_PL011,
+ .clock = 19200000
+};
+
+U_BOOT_DEVICE(hikey960_serial0) = {
+ .name = "serial_pl01x",
+ .platdata = &serial_platdata,
+};
+#endif
+
+static struct mm_region hikey_mem_map[] = {
+ {
+ .virt = 0x0UL, /* DDR */
+ .phys = 0x0UL,
+ .size = 0xC0000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = 0xE0000000UL, /* Peripheral block */
+ .phys = 0xE0000000UL,
+ .size = 0x20000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = hikey_mem_map;
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+
+ return 0;
+}
+
+void hikey960_sd_init(void)
+{
+ u32 data;
+
+ /* Enable FPLL0 */
+ data = readl(SCTRL_SCFPLLCTRL0);
+ data |= SCTRL_SCFPLLCTRL0_FPLL0_EN;
+ writel(data, SCTRL_SCFPLLCTRL0);
+
+ /* Configure LDO16 */
+ data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x79)) &
+ PMIC_VSEL_MASK;
+ data |= 6;
+ writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x79));
+
+ data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x78));
+ data |= 2;
+ writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x78));
+
+ udelay(100);
+
+ /* Configure LDO9 */
+ data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6b)) &
+ PMIC_VSEL_MASK;
+ data |= 5;
+ writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6b));
+
+ data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6a));
+ data |= 2;
+ writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6a));
+
+ udelay(100);
+
+ /* GPIO CD */
+ writel(0, PINMUX4_SDDET);
+
+ /* SD Pinconf */
+ writel(15 << 4, PINCONF3_SDCLK);
+ writel((1 << 0) | (8 << 4), PINCONF3_SDCMD);
+ writel((1 << 0) | (8 << 4), PINCONF3_SDDATA0);
+ writel((1 << 0) | (8 << 4), PINCONF3_SDDATA1);
+ writel((1 << 0) | (8 << 4), PINCONF3_SDDATA2);
+ writel((1 << 0) | (8 << 4), PINCONF3_SDDATA3);
+
+ /* Set SD clock mux */
+ do {
+ data = readl(CRG_REG_BASE + 0xb8);
+ data |= ((1 << 6) | (1 << 6 << 16) | (0 << 4) | (3 << 4 << 16));
+ writel(data, CRG_REG_BASE + 0xb8);
+
+ data = readl(CRG_REG_BASE + 0xb8);
+ } while ((data & ((1 << 6) | (3 << 4))) != ((1 << 6) | (0 << 4)));
+
+ /* Take SD out of reset */
+ writel(1 << 18, CRG_PERRSTDIS4);
+ do {
+ data = readl(CRG_PERRSTSTAT4);
+ } while ((data & (1 << 18)) == (1 << 18));
+
+ /* Enable hclk_gate_sd */
+ data = readl(CRG_REG_BASE + 0);
+ data |= (1 << 30);
+ writel(data, CRG_REG_BASE + 0);
+
+ /* Enable clk_andgt_mmc */
+ data = readl(CRG_REG_BASE + 0xf4);
+ data |= ((1 << 3) | (1 << 3 << 16));
+ writel(data, CRG_REG_BASE + 0xf4);
+
+ /* Enable clk_gate_sd */
+ data = readl(CRG_PEREN4);
+ data |= (1 << 17);
+ writel(data, CRG_PEREN4);
+ do {
+ data = readl(CRG_PERCLKEN4);
+ } while ((data & (1 << 17)) != (1 << 17));
+}
+
+static void show_psci_version(void)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(ARM_PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0, 0, 0, 0, 0, &res);
+
+ printf("PSCI: v%ld.%ld\n",
+ PSCI_VERSION_MAJOR(res.a0),
+ PSCI_VERSION_MINOR(res.a0));
+}
+
+int board_init(void)
+{
+ /* Init SD */
+ hikey960_sd_init();
+
+ show_psci_version();
+
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+ psci_system_reset();
+}
View Lorry Controller Status