ish: Trim down the release branchstabilize-wristpin-14469.59.B-ishstabilize-voshyr-14637.B-ishstabilize-quickfix-14695.187.B-ishstabilize-quickfix-14695.124.B-ishstabilize-quickfix-14526.91.B-ishstabilize-14695.85.B-ishstabilize-14695.107.B-ishstabilize-14682.B-ishstabilize-14633.B-ishstabilize-14616.B-ishstabilize-14589.B-ishstabilize-14588.98.B-ishstabilize-14588.14.B-ishstabilize-14588.123.B-ishstabilize-14536.B-ishstabilize-14532.B-ishstabilize-14528.B-ishstabilize-14526.89.B-ishstabilize-14526.84.B-ishstabilize-14526.73.B-ishstabilize-14526.67.B-ishstabilize-14526.57.B-ishstabilize-14498.B-ishstabilize-14496.B-ishstabilize-14477.B-ishstabilize-14469.9.B-ishstabilize-14469.8.B-ishstabilize-14469.58.B-ishstabilize-14469.41.B-ishstabilize-14442.B-ishstabilize-14438.B-ishstabilize-14411.B-ishstabilize-14396.B-ishstabilize-14395.B-ishstabilize-14388.62.B-ishstabilize-14388.61.B-ishstabilize-14388.52.B-ishstabilize-14385.B-ishstabilize-14345.B-ishstabilize-14336.B-ishstabilize-14333.B-ishrelease-R99-14469.B-ishrelease-R98-14388.B-ishrelease-R102-14695.B-ishrelease-R101-14588.B-ishrelease-R100-14526.B-ishfirmware-cherry-14454.B-ishfirmware-brya-14505.B-ishfirmware-brya-14505.71.B-ishfactory-kukui-14374.B-ishfactory-guybrush-14600.B-ishfactory-cherry-14455.B-ishfactory-brya-14517.B-ish

In the interest of making long-term branch maintenance incur as little
technical debt on us as possible, we should not maintain any files on
the branch we are not actually using.

This has the added effect of making it extremely clear when merging CLs
from the main branch when changes have the possibility to affect us.

The follow-on CL adds a convenience script to actually pull updates from
the main branch and generate a CL for the update.

BUG=b:204206272
BRANCH=ish
TEST=make BOARD=arcada_ish && make BOARD=drallion_ish

Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I17e4694c38219b5a0823e0a3e55a28d1348f4b18
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3262038
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Tom Hughes <tomhughes@chromium.org>

12 files changed, 0 insertions, 1652 deletions

diff --git a/board/volteer/battery.c b/board/volteer/battery.c
deleted file mode 100644
index 1c24e1ec24..0000000000
--- a/board/volteer/battery.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Battery pack vendor provided charging profile
- */
-
-#include "battery_fuel_gauge.h"
-#include "common.h"
-#include "util.h"
-
-/*
- * Battery info for all Volteer battery types. Note that the fields
- * start_charging_min/max and charging_min/max are not used for the charger.
- * The effective temperature limits are given by discharging_min/max_c.
- *
- * Fuel Gauge (FG) parameters which are used for determining if the battery
- * is connected, the appropriate ship mode (battery cutoff) command, and the
- * charge/discharge FETs status.
- *
- * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
- * register. For some batteries, the charge/discharge FET bits are set when
- * charging/discharging is active, in other types, these bits set mean that
- * charging/discharging is disabled. Therefore, in addition to the mask for
- * these bits, a disconnect value must be specified. Note that for TI fuel
- * gauge, the charge/discharge FET status is found in Operation Status (0x54),
- * but a read of Manufacturer Access (0x00) will return the lower 16 bits of
- * Operation status which contains the FET status bits.
- *
- * The assumption for battery types supported is that the charge/discharge FET
- * status can be read with a sb_read() command and therefore, only the register
- * address, mask, and disconnect value need to be provided.
- */
-const struct board_batt_params board_battery_info[] = {
-	/* LGC\011 L17L3PB0 Battery Information */
-	/*
-	 * Battery info provided by ODM on b/143477210, comment #11
-	 */
-	[BATTERY_LGC011] = {
-		.fuel_gauge = {
-			.manuf_name = "LGC",
-			.ship_mode = {
-				.reg_addr = 0x00,
-				.reg_data = { 0x10, 0x10 },
-			},
-			.fet = {
-				.reg_addr = 0x0,
-				.reg_mask = 0x6000,
-				.disconnect_val = 0x6000,
-			}
-		},
-		.batt_info = {
-			.voltage_max		= TARGET_WITH_MARGIN(13200, 5),
-			.voltage_normal		= 11550, /* mV */
-			.voltage_min		= 9000, /* mV */
-			.precharge_current	= 256,	/* mA */
-			.start_charging_min_c	= 0,
-			.start_charging_max_c	= 45,
-			.charging_min_c		= 0,
-			.charging_max_c		= 60,
-			.discharging_min_c	= 0,
-			.discharging_max_c	= 75,
-		},
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
-
-const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC011;
diff --git a/board/volteer/board.c b/board/volteer/board.c
deleted file mode 100644
index 8c1be1bf64..0000000000
--- a/board/volteer/board.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer board-specific configuration */
-#include "button.h"
-#include "common.h"
-#include "accelgyro.h"
-#include "cbi_ec_fw_config.h"
-#include "driver/accel_bma2x2.h"
-#include "driver/accelgyro_bmi260.h"
-#include "driver/als_tcs3400.h"
-#include "driver/retimer/bb_retimer_public.h"
-#include "driver/sync.h"
-#include "driver/tcpm/ps8xxx.h"
-#include "extpower.h"
-#include "fan.h"
-#include "fan_chip.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "keyboard_scan.h"
-#include "lid_switch.h"
-#include "power.h"
-#include "power_button.h"
-#include "pwm.h"
-#include "pwm_chip.h"
-#include "switch.h"
-#include "system.h"
-#include "task.h"
-#include "tablet_mode.h"
-#include "throttle_ap.h"
-#include "timer.h"
-#include "uart.h"
-#include "usb_pd.h"
-#include "usb_pd_tbt.h"
-#include "usb_pd_tcpm.h"
-#include "util.h"
-
-#include "gpio_list.h" /* Must come after other header files. */
-
-#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
-
-/******************************************************************************/
-/* Keyboard scan setting */
-__override struct keyboard_scan_config keyscan_config = {
-	/* Increase from 50 us, because KSO_02 passes through the H1. */
-	.output_settle_us = 80,
-	/* Other values should be the same as the default configuration. */
-	.debounce_down_us = 9 * MSEC,
-	.debounce_up_us = 30 * MSEC,
-	.scan_period_us = 3 * MSEC,
-	.min_post_scan_delay_us = 1000,
-	.poll_timeout_us = 100 * MSEC,
-	.actual_key_mask = {
-		0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff,
-		0xa4, 0xff, 0xfe, 0x55, 0xfa, 0xca  /* full set */
-	},
-};
-
-/******************************************************************************/
-/* Physical fans. These are logically separate from pwm_channels. */
-
-const struct fan_conf fan_conf_0 = {
-	.flags = FAN_USE_RPM_MODE,
-	.ch = MFT_CH_0,	/* Use MFT id to control fan */
-	.pgood_gpio = -1,
-	.enable_gpio = GPIO_EN_PP5000_FAN,
-};
-
-/*
- * Fan specs from datasheet:
- * Max speed 5900 rpm (+/- 7%), minimum duty cycle 30%.
- * Minimum speed not specified by RPM. Set minimum RPM to max speed (with
- * margin) x 30%.
- *    5900 x 1.07 x 0.30 = 1894, round up to 1900
- */
-const struct fan_rpm fan_rpm_0 = {
-	.rpm_min = 1900,
-	.rpm_start = 1900,
-	.rpm_max = 5900,
-};
-
-const struct fan_t fans[FAN_CH_COUNT] = {
-	[FAN_CH_0] = {
-		.conf = &fan_conf_0,
-		.rpm = &fan_rpm_0,
-	},
-};
-
-/******************************************************************************/
-/* EC thermal management configuration */
-
-/*
- * Tiger Lake specifies 100 C as maximum TDP temperature.  THRMTRIP# occurs at
- * 130 C.  However, sensor is located next to DDR, so we need to use the lower
- * DDR temperature limit (85 C)
- */
-const static struct ec_thermal_config thermal_cpu = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(70),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-	},
-	.temp_fan_off = C_TO_K(35),
-	.temp_fan_max = C_TO_K(50),
-};
-
-/*
- * Inductor limits - used for both charger and PP3300 regulator
- *
- * Need to use the lower of the charger IC, PP3300 regulator, and the inductors
- *
- * Charger max recommended temperature 100C, max absolute temperature 125C
- * PP3300 regulator: operating range -40 C to 145 C
- *
- * Inductors: limit of 125c
- * PCB: limit is 80c
- */
-const static struct ec_thermal_config thermal_inductor = {
-	.temp_host = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(75),
-		[EC_TEMP_THRESH_HALT] = C_TO_K(80),
-	},
-	.temp_host_release = {
-		[EC_TEMP_THRESH_HIGH] = C_TO_K(65),
-	},
-	.temp_fan_off = C_TO_K(40),
-	.temp_fan_max = C_TO_K(55),
-};
-
-
-struct ec_thermal_config thermal_params[] = {
-	[TEMP_SENSOR_1_CHARGER]			= thermal_inductor,
-	[TEMP_SENSOR_2_PP3300_REGULATOR]	= thermal_inductor,
-	[TEMP_SENSOR_3_DDR_SOC]			= thermal_cpu,
-	[TEMP_SENSOR_4_FAN]			= thermal_cpu,
-};
-BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT);
-
-/******************************************************************************/
-/* MFT channels. These are logically separate from pwm_channels. */
-const struct mft_t mft_channels[] = {
-	[MFT_CH_0] = {
-		.module = NPCX_MFT_MODULE_1,
-		.clk_src = TCKC_LFCLK,
-		.pwm_id = PWM_CH_FAN,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT);
-
-/******************************************************************************/
-/* I2C port map configuration */
-const struct i2c_port_t i2c_ports[] = {
-	{
-		.name = "sensor",
-		.port = I2C_PORT_SENSOR,
-		.kbps = 400,
-		.scl = GPIO_EC_I2C0_SENSOR_SCL,
-		.sda = GPIO_EC_I2C0_SENSOR_SDA,
-	},
-	{
-		.name = "usb_c0",
-		.port = I2C_PORT_USB_C0,
-		.kbps = 1000,
-		.scl = GPIO_EC_I2C1_USB_C0_SCL,
-		.sda = GPIO_EC_I2C1_USB_C0_SDA,
-	},
-	{
-		.name = "usb_c1",
-		.port = I2C_PORT_USB_C1,
-		.kbps = 1000,
-		.scl = GPIO_EC_I2C2_USB_C1_SCL,
-		.sda = GPIO_EC_I2C2_USB_C1_SDA,
-	},
-	{
-		.name = "usb_1_mix",
-		.port = I2C_PORT_USB_1_MIX,
-		.kbps = 100,
-		.scl = GPIO_EC_I2C3_USB_1_MIX_SCL,
-		.sda = GPIO_EC_I2C3_USB_1_MIX_SDA,
-	},
-	{
-		.name = "power",
-		.port = I2C_PORT_POWER,
-		.kbps = 100,
-		.scl = GPIO_EC_I2C5_BATTERY_SCL,
-		.sda = GPIO_EC_I2C5_BATTERY_SDA,
-	},
-	{
-		.name = "eeprom",
-		.port = I2C_PORT_EEPROM,
-		.kbps = 400,
-		.scl = GPIO_EC_I2C7_EEPROM_PWR_SCL_R,
-		.sda = GPIO_EC_I2C7_EEPROM_PWR_SDA_R,
-	},
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-/******************************************************************************/
-/* PWM configuration */
-const struct pwm_t pwm_channels[] = {
-	[PWM_CH_LED1_BLUE] = {
-		.channel = 2,
-		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
-		.freq = 4800,
-	},
-	[PWM_CH_LED2_GREEN] = {
-		.channel = 0,
-		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
-		.freq = 4800,
-	},
-	[PWM_CH_LED3_RED] = {
-		.channel = 1,
-		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
-		.freq = 4800,
-	},
-	[PWM_CH_LED4_SIDESEL] = {
-		.channel = 7,
-		.flags = PWM_CONFIG_ACTIVE_LOW | PWM_CONFIG_DSLEEP,
-		/*
-		 * If using the side select to run both LEDs at the same time,
-		 * the frequency should be 1/2 of the color channel PWM
-		 * frequency to drive each LED equally.
-		 */
-		.freq = 2400,
-	},
-	[PWM_CH_FAN] = {
-		.channel = 5,
-		.flags = PWM_CONFIG_OPEN_DRAIN,
-		.freq = 25000
-	},
-	[PWM_CH_KBLIGHT] = {
-		.channel = 3,
-		.flags = 0,
-		/*
-		 * Set PWM frequency to multiple of 50 Hz and 60 Hz to prevent
-		 * flicker. Higher frequencies consume similar average power to
-		 * lower PWM frequencies, but higher frequencies record a much
-		 * lower maximum power.
-		 */
-		.freq = 2400,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT);
diff --git a/board/volteer/board.h b/board/volteer/board.h
deleted file mode 100644
index bd527510f2..0000000000
--- a/board/volteer/board.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-/* Baseboard features */
-#include "baseboard.h"
-
-/*
- * Create an EC build that requires AP-driven mode entry to facilitate debugging
- * b/177105656.
- */
-#ifdef BOARD_VOLTEER_APMODEENTRY
-#define CONFIG_USB_PD_REQUIRE_AP_MODE_ENTRY
-#endif
-
-#ifdef BOARD_VOLTEER_NPCX797FC
-/*
- * The RAM and flash size combination on the the NPCX797FC does not leave
- * any unused flash space that can be used to store the .init_rom section.
- */
-#undef CONFIG_CHIP_INIT_ROM_REGION
-#endif
-
-/* Optional features */
-#define CONFIG_SYSTEM_UNLOCKED /* Allow dangerous commands while in dev. */
-
-/* Remove PRL state names to free flash space */
-#define CONFIG_USB_PD_DEBUG_LEVEL 2
-
-#define CONFIG_VBOOT_EFS2
-
-#define CONFIG_POWER_BUTTON
-
-#undef CONFIG_UART_TX_BUF_SIZE
-#define CONFIG_UART_TX_BUF_SIZE 4096
-
-/* Chipset features */
-#define CONFIG_POWER_PP5000_CONTROL
-
-/* LED defines */
-#define CONFIG_LED_PWM
-/* Although there are 2 LEDs, they are both controlled by the same lines. */
-#define CONFIG_LED_PWM_COUNT 1
-
-/* Keyboard features */
-
-/* Sensors */
-/* BMA253 accelerometer in base */
-#define CONFIG_ACCEL_BMA255
-
-/* BMI260 accel/gyro in base */
-#define CONFIG_ACCELGYRO_BMI260
-#define CONFIG_ACCELGYRO_BMI260_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-
-/* TCS3400 ALS */
-#define CONFIG_ALS
-#define ALS_COUNT		1
-#define CONFIG_ALS_TCS3400
-#define CONFIG_ALS_TCS3400_INT_EVENT \
-	TASK_EVENT_MOTION_SENSOR_INTERRUPT(CLEAR_ALS)
-
-/* Sensors without hardware FIFO are in forced mode */
-#define CONFIG_ACCEL_FORCE_MODE_MASK \
-	(BIT(LID_ACCEL) | BIT(CLEAR_ALS))
-
-#define CONFIG_LID_ANGLE
-#define CONFIG_LID_ANGLE_UPDATE
-#define CONFIG_LID_ANGLE_SENSOR_BASE		BASE_ACCEL
-#define CONFIG_LID_ANGLE_SENSOR_LID		LID_ACCEL
-
-/* USB Type C and USB PD defines */
-#define CONFIG_USB_PD_PORT_MAX_COUNT			2
-
-/* TODO: b/144165680 - measure and check these values on Volteer */
-#define PD_POWER_SUPPLY_TURN_ON_DELAY	30000 /* us */
-#define PD_POWER_SUPPLY_TURN_OFF_DELAY	30000 /* us */
-/*
- * SN5S30 PPC supports up to 24V VBUS source and sink, however passive USB-C
- * cables only support up to 60W.
- */
-#define PD_OPERATING_POWER_MW	15000
-#define PD_MAX_POWER_MW		60000
-#define PD_MAX_CURRENT_MA	3000
-#define PD_MAX_VOLTAGE_MV	20000
-
-/* Enabling Thunderbolt-compatible mode */
-#define CONFIG_USB_PD_TBT_COMPAT_MODE
-
-/* Enabling USB4 mode */
-#define CONFIG_USB_PD_USB4
-#define USBC_PORT_C1_BB_RETIMER_I2C_ADDR	0x40
-
-/* USB Type A Features */
-#define USB_PORT_COUNT			1
-#define CONFIG_USB_PORT_POWER_DUMB
-
-/* USBC PPC*/
-#define CONFIG_USBC_PPC_SN5S330		/* USBC port C0 */
-#define CONFIG_USBC_PPC_SYV682X		/* USBC port C1 */
-#define CONFIG_USB_PD_FRS_PPC
-
-/* BC 1.2 */
-
-/* Volume Button feature */
-
-/* Fan features */
-
-/* charger defines */
-#define CONFIG_CHARGER_SENSE_RESISTOR		10
-#define CONFIG_CHARGER_SENSE_RESISTOR_AC	10
-
-/*
- * Macros for GPIO signals used in common code that don't match the
- * schematic names. Signal names in gpio.inc match the schematic and are
- * then redefined here to so it's more clear which signal is being used for
- * which purpose.
- */
-#define GPIO_AC_PRESENT			GPIO_ACOK_OD
-#define GPIO_EC_INT_L			GPIO_EC_PCH_INT_ODL
-#define GPIO_EN_PP5000			GPIO_EN_PP5000_A
-#define GPIO_ENTERING_RW		GPIO_EC_ENTERING_RW
-#define GPIO_LID_OPEN			GPIO_EC_LID_OPEN
-#define GPIO_KBD_KSO2			GPIO_EC_KSO_02_INV
-#define GPIO_PACKET_MODE_EN		GPIO_EC_H1_PACKET_MODE
-#define GPIO_PCH_WAKE_L			GPIO_EC_PCH_WAKE_ODL
-#define GPIO_PCH_PWRBTN_L		GPIO_EC_PCH_PWR_BTN_ODL
-#define GPIO_PCH_RSMRST_L		GPIO_EC_PCH_RSMRST_ODL
-#define GPIO_PCH_RTCRST			GPIO_EC_PCH_RTCRST
-#define GPIO_PCH_SLP_S0_L		GPIO_SLP_S0_L
-#define GPIO_PCH_SLP_S3_L		GPIO_SLP_S3_L
-#define GPIO_PCH_DSW_PWROK		GPIO_EC_PCH_DSW_PWROK
-#define GPIO_POWER_BUTTON_L		GPIO_H1_EC_PWR_BTN_ODL
-#define GPIO_RSMRST_L_PGOOD		GPIO_PG_EC_RSMRST_ODL
-#define GPIO_CPU_PROCHOT		GPIO_EC_PROCHOT_ODL
-#define GPIO_SYS_RESET_L		GPIO_SYS_RST_ODL
-#define GPIO_WP_L			GPIO_EC_WP_L
-#define GPIO_USB_C1_BC12_INT_ODL	GPIO_USB_C1_MIX_INT_ODL
-#define GPIO_VOLUME_UP_L		GPIO_EC_VOLUP_BTN_ODL
-#define GPIO_VOLUME_DOWN_L		GPIO_EC_VOLDN_BTN_ODL
-#define GMR_TABLET_MODE_GPIO_L		GPIO_TABLET_MODE_L
-
-/* I2C Bus Configuration */
-#define CONFIG_I2C
-#define I2C_PORT_ACCEL		I2C_PORT_SENSOR
-#define I2C_PORT_SENSOR		NPCX_I2C_PORT0_0
-#define I2C_PORT_USB_C0		NPCX_I2C_PORT1_0
-#define I2C_PORT_USB_C1		NPCX_I2C_PORT2_0
-#define I2C_PORT_USB_1_MIX	NPCX_I2C_PORT3_0
-#define I2C_PORT_POWER		NPCX_I2C_PORT5_0
-#define I2C_PORT_EEPROM		NPCX_I2C_PORT7_0
-
-#define I2C_PORT_BATTERY	I2C_PORT_POWER
-#define I2C_PORT_CHARGER	I2C_PORT_EEPROM
-
-#define I2C_ADDR_EEPROM_FLAGS	0x50
-#define CONFIG_I2C_CONTROLLER
-
-#define CONFIG_DEBUG_ASSERT_BRIEF
-
-/* Disable console commands to help save space */
-#undef CONFIG_CMD_APTHROTTLE
-#undef CONFIG_CMD_BUTTON
-#undef CONFIG_CONSOLE_CMDHELP
-
-/* Disable volume button in ectool */
-#undef CONFIG_HOSTCMD_BUTTON
-
-#ifndef __ASSEMBLER__
-
-#include "gpio_signal.h"
-#include "registers.h"
-
-#include "usbc_config.h"
-
-enum battery_type {
-	BATTERY_LGC011,
-	BATTERY_TYPE_COUNT,
-};
-
-enum pwm_channel {
-	PWM_CH_LED1_BLUE = 0,
-	PWM_CH_LED2_GREEN,
-	PWM_CH_LED3_RED,
-	PWM_CH_LED4_SIDESEL,
-	PWM_CH_FAN,
-	PWM_CH_KBLIGHT,
-	PWM_CH_COUNT
-};
-
-enum sensor_id {
-	LID_ACCEL = 0,
-	BASE_ACCEL,
-	BASE_GYRO,
-	CLEAR_ALS,
-	RGB_ALS,
-	SENSOR_COUNT,
-};
-
-void board_reset_pd_mcu(void);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/volteer/build.mk b/board/volteer/build.mk
deleted file mode 100644
index 5adcffff56..0000000000
--- a/board/volteer/build.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-# -*- makefile -*-
-# Copyright 2019 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-#
-
-CHIP:=npcx
-CHIP_FAMILY:=npcx7
-# A limited Volteer boards are reworked with NPCX797FC variant. Set the
-# modify the variant type to match.
-ifeq ($(BOARD),volteer_npcx797fc)
-CHIP_VARIANT:=npcx7m7fc
-else
-CHIP_VARIANT:=npcx7m6fc
-endif
-BASEBOARD:=volteer
-
-board-y=board.o
-board-y+=battery.o
-board-y+=cbi.o
-board-y+=led.o
-board-y+=sensors.o
-board-y+=usbc_config.o
diff --git a/board/volteer/cbi.c b/board/volteer/cbi.c
deleted file mode 100644
index b39f0d7d2f..0000000000
--- a/board/volteer/cbi.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Features common to ECOS and Zephyr */
-#include "common.h"
-#include "cbi.h"
-#include "cbi_ec_fw_config.h"
-#include "keyboard_raw.h"
-#include "usbc_config.h"
-
-/******************************************************************************/
-/*
- * FW_CONFIG defaults for Volteer if the CBI data is not initialized.
- */
-union volteer_cbi_fw_config fw_config_defaults = {
-	.usb_db = DB_USB4_GEN2,
-};
-
-__override void board_cbi_init(void)
-{
-	config_usb3_db_type();
-	if ((!IS_ENABLED(TEST_BUILD) && !ec_cfg_has_numeric_pad()) ||
-	    get_board_id() <= 2)
-		keyboard_raw_set_cols(KEYBOARD_COLS_NO_KEYPAD);
-}
diff --git a/board/volteer/ec.tasklist b/board/volteer/ec.tasklist
deleted file mode 100644
index ec9e64e850..0000000000
--- a/board/volteer/ec.tasklist
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * See CONFIG_TASK_LIST in config.h for details.
- */
-
-#define CONFIG_TASK_LIST \
-	TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHG_RAMP, chg_ramp_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P0, usb_charger_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(USB_CHG_P1, usb_charger_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(CHARGER, charger_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(MOTIONSENSE, motion_sense_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYPROTO, keyboard_protocol_task, NULL, TASK_STACK_SIZE) \
-	TASK_NOTEST(CHIPSET, chipset_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(HOSTCMD, host_command_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_ALWAYS(CONSOLE, console_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(POWERBTN, power_button_task, NULL, LARGER_TASK_STACK_SIZE) \
-	TASK_NOTEST(KEYSCAN, keyboard_scan_task, NULL, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C0, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_C1, pd_task, NULL, VENTI_TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C0, pd_interrupt_handler_task, 0, TASK_STACK_SIZE) \
-	TASK_ALWAYS(PD_INT_C1, pd_interrupt_handler_task, 1, TASK_STACK_SIZE)
diff --git a/board/volteer/gpio.inc b/board/volteer/gpio.inc
deleted file mode 100644
index 33d04741d3..0000000000
--- a/board/volteer/gpio.inc
+++ /dev/null
@@ -1,188 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Declare symbolic names for all the GPIOs that we care about.
- * Note: Those with interrupt handlers must be declared first. */
-
-/* Wake Source interrupts */
-GPIO_INT(EC_LID_OPEN,          PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt)
-GPIO_INT(EC_WP_L,              PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)
-GPIO_INT(H1_EC_PWR_BTN_ODL,    PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt)
-GPIO_INT(ACOK_OD,              PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt)
-
-/* Power sequencing interrupts */
-GPIO_INT(SLP_S0_L,             PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt)
-#ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_S3
-GPIO_INT(SLP_S3_L,             PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt)
-#endif
-GPIO_INT(SLP_SUS_L,            PIN(D, 7), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_EC_RSMRST_ODL,     PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_EC_DSW_PWROK,      PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt)
-GPIO_INT(PG_EC_ALL_SYS_PWRGD,  PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt)
-
-/* Sensor Interrupts */
-GPIO_INT(EC_IMU_INT_L,         PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi260_interrupt)
-GPIO_INT(EC_ALS_RGB_INT_L,     PIN(D, 4), GPIO_INT_FALLING, tcs3400_interrupt)
-GPIO_INT(TABLET_MODE_L,        PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr)
-/*
- * Lid g-sensor interrupt unused on Volteer, configure as regular input for
- * power saving.
- */
-GPIO(EC_ACCEL_INT,		PIN(8, 1), GPIO_INPUT | GPIO_PULL_UP)
-
-/* USB-C interrupts */
-GPIO_INT(USB_C0_TCPC_INT_ODL,	PIN(E, 0), GPIO_INT_BOTH, tcpc_alert_event)
-GPIO_INT(USB_C1_TCPC_INT_ODL,	PIN(A, 2), GPIO_INT_BOTH, tcpc_alert_event)
-
-GPIO_INT(USB_C0_PPC_INT_ODL,	PIN(6, 2), GPIO_INT_BOTH, ppc_interrupt)
-GPIO_INT(USB_C1_PPC_INT_ODL,	PIN(F, 5), GPIO_INT_BOTH, ppc_interrupt)
-
-GPIO_INT(USB_C0_BC12_INT_ODL,	PIN(E, 4), GPIO_INT_BOTH, bc12_interrupt)
-GPIO_INT(USB_C1_MIX_INT_ODL,	PIN(0, 3), GPIO_INT_BOTH, bc12_interrupt)
-
-/* HDMI interrupts */
-
-/* Volume button interrupts */
-GPIO_INT(EC_VOLDN_BTN_ODL,		PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
-GPIO_INT(EC_VOLUP_BTN_ODL,		PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
-
-/* Power Sequencing Signals */
-GPIO(EN_PP3300_A,              PIN(A, 3), GPIO_OUT_LOW)
-GPIO(EN_PP5000_A,              PIN(A, 4), GPIO_OUT_LOW)
-GPIO(EN_PPVAR_VCCIN,           PIN(4, 3), GPIO_OUT_LOW) /* Enables VCCIN IMPV9 */
-GPIO(EC_PCH_DSW_PWROK,         PIN(C, 0), GPIO_OUT_LOW)
-
-/* Other wake sources */
-/*
- * GPIO_INT_BOTH is required for PSL wake from hibernate, but we don't need an
- * interrupt handler because it is automatically handled by the PSL.
- *
- * We need to lock the setting so this gpio can't be reconfigured to overdrive
- * the real reset signal. (This is the PSL input pin not the real reset pin).
- */
-GPIO(EC_RST_ODL,		PIN(0, 2), GPIO_INT_BOTH |
-					   GPIO_HIB_WAKE_HIGH |
-					   GPIO_LOCKED)
-
-/* AP/PCH Signals */
-GPIO(EC_PCH_SYS_PWROK,         PIN(3, 7), GPIO_OUT_LOW)
-GPIO(EC_PCH_RSMRST_ODL,        PIN(A, 6), GPIO_ODR_LOW) /* TODO - b/140950085 - implement TGL sequencing requirement */
-GPIO(EC_PCH_PWR_BTN_ODL,       PIN(C, 1), GPIO_ODR_HIGH)
-GPIO(EC_PCH_RTCRST,            PIN(7, 6), GPIO_OUT_LOW)
-GPIO(EC_PCH_WAKE_ODL,          PIN(7, 4), GPIO_ODR_HIGH)
-GPIO(EC_ENTERING_RW,           PIN(E, 3), GPIO_OUT_LOW)
-GPIO(EC_PROCHOT_ODL,           PIN(6, 3), GPIO_ODR_HIGH)
-GPIO_INT(EC_PROCHOT_IN_L,      PIN(F, 0), GPIO_INT_BOTH, throttle_ap_prochot_input_interrupt)
-GPIO(SYS_RST_ODL,              PIN(C, 5), GPIO_ODR_HIGH)
-
-GPIO(EC_PCH_INT_ODL,           PIN(B, 0), GPIO_ODR_HIGH)
-
-/* USB and USBC Signals */
-GPIO(EN_PP5000_USBA,		PIN(C, 6), GPIO_OUT_LOW)	/* Enable USB-A charging - all ports */
-GPIO(USB_A_LOW_PWR_OD,		PIN(6, 6), GPIO_ODR_LOW)	/* Don't limit USB-A charging by default - all ports */
-GPIO(USB_C1_RT_RST_ODL,		PIN(8, 3), GPIO_ODR_LOW)
-GPIO(USB_C0_OC_ODL,		PIN(B, 1), GPIO_ODR_HIGH)
-GPIO(USB_C1_OC_ODL,		PIN(5, 0), GPIO_ODR_HIGH)
-/* There is currently no need to service this interrupt. */
-GPIO(USB_C1_RT_INT_ODL,		PIN(F, 3), GPIO_INPUT)
-GPIO(USB_C1_FRS_EN, 		PIN(9, 4), GPIO_OUT_LOW)
-
-/* Don't have a load switch for retimer */
-UNIMPLEMENTED(USB_C1_LS_EN)
-
-/* Misc Signals */
-GPIO(EC_H1_PACKET_MODE,		PIN(7, 5), GPIO_OUT_LOW)	/* H1 Packet Mode */
-/*
- * Despite their names, M2_SSD_PLN and M2_SSD_PLA are active-low, and M2_SSD_PLN
- * is open-drain.
- * TODO(b/138954381): Change these names when they change on the schematic.
- */
-GPIO(M2_SSD_PLN,		PIN(A, 0), GPIO_ODR_HIGH)	/* SSD power-loss notification */
-GPIO(M2_SSD_PLA,		PIN(7, 0), GPIO_INPUT)		/* SSD power-loss acknowledgment */
-GPIO(CCD_MODE_ODL,		PIN(E, 5), GPIO_INPUT)		/* Case Closed Debug Mode */
-GPIO(EC_SLP_S0IX,		PIN(7, 2), GPIO_INPUT | GPIO_PULL_UP)
-
-/* Unused signals */
-GPIO(CHARGER_INT_L,		PIN(7, 3), GPIO_INPUT)		/* Interrupt not used from ISL9241, on board pull-up */
-GPIO(EC_GP_SEL0_ODL,		PIN(B, 6), GPIO_OUT_LOW) 	/* Cannot be configured as input, drive output low, don't rely on the default setting of PxDOUT register */
-GPIO(CPU_C10_GATE_L, 		PIN(6, 7), GPIO_INPUT)		/* Unused power sequence signal from AP. Has an on-board pull-down. */
-GPIO(EN_PP5000_USB_AG,		PIN(A, 7), GPIO_INPUT | GPIO_PULL_UP) /* Unconnected power sequencing signal */
-GPIO(UNUSED_GPIO41,		PIN(4, 1), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(UNUSED_GPIOF2,		PIN(F, 2), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(UNUSED_GPIO96,		PIN(9, 6), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(UNUSED_GPIO34,		PIN(3, 4), GPIO_INPUT | GPIO_PULL_UP)
-/* Only connected to test points */
-GPIO(EC_KB_BL_EN,		PIN(8, 6), GPIO_INPUT | GPIO_PULL_UP)
-GPIO(EC_ESPI_ALERT_L,		PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP)
-
-/*
- * eDP backlight - both PCH and EC have enable pins that must be high
- * for the backlight to turn on. Default state is high, and can be turned
- * off during sleep states.
- */
-GPIO(EC_EDP_BL_EN,             PIN(D, 3), GPIO_OUT_HIGH)
-
-/* I2C pins - Alternate function below configures I2C module on these pins */
-GPIO(EC_I2C0_SENSOR_SCL,       PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C0_SENSOR_SDA,       PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V)
-GPIO(EC_I2C1_USB_C0_SCL,       PIN(9, 0), GPIO_INPUT)
-GPIO(EC_I2C1_USB_C0_SDA,       PIN(8, 7), GPIO_INPUT)
-GPIO(EC_I2C2_USB_C1_SCL,       PIN(9, 2), GPIO_INPUT)
-GPIO(EC_I2C2_USB_C1_SDA,       PIN(9, 1), GPIO_INPUT)
-GPIO(EC_I2C3_USB_1_MIX_SCL,    PIN(D, 1), GPIO_INPUT)
-GPIO(EC_I2C3_USB_1_MIX_SDA,    PIN(D, 0), GPIO_INPUT)
-GPIO(EC_I2C5_BATTERY_SCL,      PIN(3, 3), GPIO_INPUT)
-GPIO(EC_I2C5_BATTERY_SDA,      PIN(3, 6), GPIO_INPUT)
-GPIO(EC_I2C7_EEPROM_PWR_SCL_R, PIN(B, 3), GPIO_INPUT)
-GPIO(EC_I2C7_EEPROM_PWR_SDA_R, PIN(B, 2), GPIO_INPUT)
-
-/* Battery signals */
-GPIO(EC_BATT_PRES_ODL, 		PIN(E, 1), GPIO_INPUT)
-
-/* Alternate functions GPIO definitions */
-ALTERNATE(PIN_MASK(B, BIT(5) | BIT(4)), 0, MODULE_I2C, (GPIO_INPUT | GPIO_SEL_1P8V)) /* I2C0 */
-ALTERNATE(PIN_MASK(9, BIT(0) | BIT(2) | BIT(1)), 0, MODULE_I2C, 0)                   /* I2C1 SCL / I2C2 */
-ALTERNATE(PIN_MASK(8, BIT(7)), 0, MODULE_I2C, 0)                                     /* I2C1 SDA */
-ALTERNATE(PIN_MASK(D, BIT(1) | BIT(0)), 0, MODULE_I2C, 0)                            /* I2C3 */
-ALTERNATE(PIN_MASK(3, BIT(3) | BIT(6)), 0, MODULE_I2C, 0)                            /* I2C5 */
-ALTERNATE(PIN_MASK(B, BIT(3) | BIT(2)), 0, MODULE_I2C, 0)                            /* I2C7 */
-
-/* This selects between an LED module on the motherboard and one on the daughter
- * board, to be controlled by LED_{1,2,3}_L. PWM allows driving both modules at
- * the same time. */
-ALTERNATE(PIN_MASK(6, BIT(0)), 0, MODULE_PWM, 0)                                     /* LED_SIDESEL_4_L */
-ALTERNATE(PIN_MASK(C, BIT(2) | BIT(3) | BIT(4)), 0, MODULE_PWM, 0)                   /* LED_{3,2,1}_L */
-
-/* Fan signals */
-GPIO(EN_PP5000_FAN,            PIN(6, 1), GPIO_OUT_LOW)
-ALTERNATE(PIN_MASK(B, BIT(7)), 0, MODULE_PWM, 0)	/* FAN_PWM */
-ALTERNATE(PIN_MASK(4, BIT(0)), 0, MODULE_PWM, 0)	/* FAN_SPEED_TACH */
-
-/* Keyboard pins */
-#define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP)
-ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_00-01 */
-ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_02-07 */
-ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */
-GPIO(EC_KSO_02_INV, PIN(1, 7),                        GPIO_OUT_LOW)  /* KSO_02 */
-ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */
-ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-13 */
-ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_14 */
-ALTERNATE(PIN_MASK(8, BIT(0)), 0, MODULE_PWM, 0)                     /* EC_KB_BL_PWM */
-
-/* UART */
-ALTERNATE(PIN_MASK(6, BIT(5) | BIT(4)), 0, MODULE_UART, 0)                           /* UART from EC to Servo */
-
-/* Power Switch Logic (PSL) inputs */
-ALTERNATE(PIN_MASK(D, BIT(2)), 0, MODULE_PMU, 0)                    /* GPIOD2 = EC_LID_OPEN */
-ALTERNATE(PIN_MASK(0, BIT(0) | BIT(1) | BIT(2)), 0, MODULE_PMU, 0)  /* GPIO00 = ACOK_OD,
-                                                                       GPIO01 = H1_EC_PWR_BTN_ODL
-                                                                       GPIO02 = EC_RST_ODL */
-
-/* Temperature sensors */
-ALTERNATE(PIN_MASK(4, BIT(2) | BIT(4) | BIT(5)), 0, MODULE_ADC, 0) /* TEMP_SENSOR1,2,4 */
-ALTERNATE(PIN(F, 1), 0, MODULE_ADC, 0) /* TEMP_SENSOR3 */
-
diff --git a/board/volteer/led.c b/board/volteer/led.c
deleted file mode 100644
index 6b09d5b4a0..0000000000
--- a/board/volteer/led.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Power and battery LED control for Volteer
- */
-
-#include "charge_manager.h"
-#include "common.h"
-#include "ec_commands.h"
-#include "hooks.h"
-#include "led_common.h"
-#include "led_pwm.h"
-#include "pwm.h"
-
-const enum ec_led_id supported_led_ids[] = {
-	EC_LED_ID_POWER_LED,
-};
-const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids);
-
-#ifndef CONFIG_ZEPHYR
-struct pwm_led_color_map led_color_map[EC_LED_COLOR_COUNT] = {
-				/* Red, Green, Blue */
-	[EC_LED_COLOR_RED] =    {  100,   0,     0 },
-	[EC_LED_COLOR_GREEN] =  {    0, 100,     0 },
-	[EC_LED_COLOR_BLUE] =   {    0,   0,   100 },
-	/* The green LED seems to be brighter than the others, so turn down
-	 * green from its natural level for these secondary colors.
-	 */
-	[EC_LED_COLOR_YELLOW] = {  100,  70,     0 },
-	[EC_LED_COLOR_WHITE] =  {  100,  70,   100 },
-	[EC_LED_COLOR_AMBER] =  {  100,  20,     0 },
-};
-
-struct pwm_led pwm_leds[] = {
-	/* 2 RGB diffusers controlled by 1 set of 3 channels. */
-	[PWM_LED0] = {
-		.ch0 = PWM_CH_LED3_RED,
-		.ch1 = PWM_CH_LED2_GREEN,
-		.ch2 = PWM_CH_LED1_BLUE,
-		.enable = &pwm_enable,
-		.set_duty = &pwm_set_duty,
-	},
-};
-
-void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range)
-{
-	brightness_range[EC_LED_COLOR_RED] = 255;
-	brightness_range[EC_LED_COLOR_GREEN] = 255;
-	brightness_range[EC_LED_COLOR_BLUE] = 255;
-}
-#endif
-
-int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness)
-{
-	enum pwm_led_id pwm_id;
-
-	/* Convert ec_led_id to pwm_led_id. */
-	if (led_id == EC_LED_ID_POWER_LED)
-		pwm_id = PWM_LED0;
-	else
-		return EC_ERROR_UNKNOWN;
-
-	if (brightness[EC_LED_COLOR_RED])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_RED);
-	else if (brightness[EC_LED_COLOR_GREEN])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_GREEN);
-	else if (brightness[EC_LED_COLOR_BLUE])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_BLUE);
-	else if (brightness[EC_LED_COLOR_YELLOW])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_YELLOW);
-	else if (brightness[EC_LED_COLOR_WHITE])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_WHITE);
-	else if (brightness[EC_LED_COLOR_AMBER])
-		set_pwm_led_color(pwm_id, EC_LED_COLOR_AMBER);
-	else
-		/* Otherwise, the "color" is "off". */
-		set_pwm_led_color(pwm_id, -1);
-
-	return EC_SUCCESS;
-}
-
-/* Illuminates the LED on the side of the active charging port. If not charging,
- * illuminates both LEDs.
- */
-static void led_set_charge_port_tick(void)
-{
-	int port;
-	int side_select_duty;
-
-	port = charge_manager_get_active_charge_port();
-	switch (port) {
-	case 0:
-		side_select_duty = 100;
-		break;
-	case 1:
-		side_select_duty = 0;
-		break;
-	default:
-		side_select_duty = 50;
-	}
-
-	if (led_auto_control_is_enabled(EC_LED_ID_POWER_LED))
-		pwm_set_duty(PWM_CH_LED4_SIDESEL, side_select_duty);
-}
-DECLARE_HOOK(HOOK_TICK, led_set_charge_port_tick, HOOK_PRIO_DEFAULT);
-
-static void board_led_init(void)
-{
-	/* Illuminate motherboard and daughter board LEDs equally to start. */
-	pwm_enable(PWM_CH_LED4_SIDESEL, 1);
-	pwm_set_duty(PWM_CH_LED4_SIDESEL, 50);
-}
-DECLARE_HOOK(HOOK_INIT, board_led_init, HOOK_PRIO_DEFAULT);
diff --git a/board/volteer/sensors.c b/board/volteer/sensors.c
deleted file mode 100644
index 5f7e197924..0000000000
--- a/board/volteer/sensors.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/* Copyright 2020 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer family-specific sensor configuration */
-#include "common.h"
-#include "accelgyro.h"
-#include "driver/accel_bma2x2_public.h"
-#include "driver/accelgyro_bmi_common_public.h"
-#include "driver/accelgyro_bmi260_public.h"
-#include "driver/als_tcs3400_public.h"
-#include "keyboard_scan.h"
-#include "hooks.h"
-#include "i2c.h"
-#include "task.h"
-#include "tablet_mode.h"
-#include "util.h"
-
-/******************************************************************************/
-/* Sensors */
-K_MUTEX_DEFINE(g_lid_accel_mutex);
-K_MUTEX_DEFINE(g_base_mutex);
-
-/* BMA253 private data */
-static struct accelgyro_saved_data_t g_bma253_data;
-
-/* BMI260 private data */
-static struct bmi_drv_data_t g_bmi260_data;
-
-/* TCS3400 private data */
-static struct als_drv_data_t g_tcs3400_data = {
-	.als_cal.scale = 1,
-	.als_cal.uscale = 0,
-	.als_cal.offset = 0,
-	.als_cal.channel_scale = {
-		.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kc from VPD */
-		.cover_scale = ALS_CHANNEL_SCALE(1.0),     /* CT */
-	},
-};
-
-/*
- * TODO: b/146166425 need to calibrate ALS/RGB sensor. At default settings,
- * shining phone flashlight on sensor pegs all readings at 0xFFFF.
- */
-static struct tcs3400_rgb_drv_data_t g_tcs3400_rgb_data = {
-	.calibration.rgb_cal[X] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kr */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.rgb_cal[Y] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kg */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		},
-	},
-	.calibration.rgb_cal[Z] = {
-		.offset = 0,
-		.coeff[TCS_RED_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_GREEN_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_BLUE_COEFF_IDX] = FLOAT_TO_FP(0),
-		.coeff[TCS_CLEAR_COEFF_IDX] = FLOAT_TO_FP(0),
-		.scale = {
-			.k_channel_scale = ALS_CHANNEL_SCALE(1.0), /* kb */
-			.cover_scale = ALS_CHANNEL_SCALE(1.0)
-		}
-	},
-	.calibration.irt = INT_TO_FP(1),
-	.saturation.again = TCS_DEFAULT_AGAIN,
-	.saturation.atime = TCS_DEFAULT_ATIME,
-};
-
-/* Rotation matrix for the lid accelerometer */
-static const mat33_fp_t lid_standard_ref = {
-	{ FLOAT_TO_FP(1), 0, 0},
-	{ 0, FLOAT_TO_FP(-1), 0},
-	{ 0, 0, FLOAT_TO_FP(-1)}
-};
-
-const mat33_fp_t base_standard_ref = {
-	{ 0, FLOAT_TO_FP(1), 0},
-	{ FLOAT_TO_FP(-1), 0, 0},
-	{ 0, 0, FLOAT_TO_FP(1)}
-};
-
-struct motion_sensor_t motion_sensors[] = {
-	[LID_ACCEL] = {
-		.name = "Lid Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMA255,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_LID,
-		.drv = &bma2x2_accel_drv,
-		.mutex = &g_lid_accel_mutex,
-		.drv_data = &g_bma253_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS,
-		.rot_standard_ref = &lid_standard_ref,
-		.min_frequency = BMA255_ACCEL_MIN_FREQ,
-		.max_frequency = BMA255_ACCEL_MAX_FREQ,
-		.default_range = 2, /* g, to support tablet mode */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-			},
-		},
-	},
-	[BASE_ACCEL] = {
-		.name = "Base Accel",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI260,
-		.type = MOTIONSENSE_TYPE_ACCEL,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi260_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi260_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMI260_ADDR0_FLAGS,
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_ACCEL_MIN_FREQ,
-		.max_frequency = BMI_ACCEL_MAX_FREQ,
-		.default_range = 4, /* g */
-		.config = {
-			/* EC use accel for angle detection */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-			/* Sensor on in S3 */
-			[SENSOR_CONFIG_EC_S3] = {
-				.odr = 10000 | ROUND_UP_FLAG,
-				.ec_rate = 100 * MSEC,
-			},
-		},
-	},
-
-	[BASE_GYRO] = {
-		.name = "Base Gyro",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_BMI260,
-		.type = MOTIONSENSE_TYPE_GYRO,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &bmi260_drv,
-		.mutex = &g_base_mutex,
-		.drv_data = &g_bmi260_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = BMI260_ADDR0_FLAGS,
-		.default_range = 1000, /* dps */
-		.rot_standard_ref = &base_standard_ref,
-		.min_frequency = BMI_GYRO_MIN_FREQ,
-		.max_frequency = BMI_GYRO_MAX_FREQ,
-	},
-	[CLEAR_ALS] = {
-		.name = "Clear Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_drv,
-		.drv_data = &g_tcs3400_data,
-		.port = I2C_PORT_SENSOR,
-		.i2c_spi_addr_flags = TCS3400_I2C_ADDR_FLAGS,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-		.min_frequency = TCS3400_LIGHT_MIN_FREQ,
-		.max_frequency = TCS3400_LIGHT_MAX_FREQ,
-		.config = {
-			/* Run ALS sensor in S0 */
-			[SENSOR_CONFIG_EC_S0] = {
-				.odr = 1000,
-			},
-		},
-	},
-
-	[RGB_ALS] = {
-		/*
-		 * RGB channels read by CLEAR_ALS and so the i2c port and
-		 * address do not need to be defined for RGB_ALS.
-		 */
-		.name = "RGB Light",
-		.active_mask = SENSOR_ACTIVE_S0_S3,
-		.chip = MOTIONSENSE_CHIP_TCS3400,
-		.type = MOTIONSENSE_TYPE_LIGHT_RGB,
-		.location = MOTIONSENSE_LOC_BASE,
-		.drv = &tcs3400_rgb_drv,
-		.drv_data = &g_tcs3400_rgb_data,
-		.rot_standard_ref = NULL,
-		.default_range = 0x10000, /* scale = 1x, uscale = 0 */
-	},
-};
-unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
-
-/* ALS instances when LPC mapping is needed. Each entry directs to a sensor. */
-const struct motion_sensor_t *motion_als_sensors[] = {
-	&motion_sensors[CLEAR_ALS],
-};
-BUILD_ASSERT(ARRAY_SIZE(motion_als_sensors) == ALS_COUNT);
-
-static void baseboard_sensors_init(void)
-{
-	/* Note - BMA253 interrupt unused by EC */
-
-	/* Enable interrupt for the TCS3400 color light sensor */
-	gpio_enable_interrupt(GPIO_EC_ALS_RGB_INT_L);
-	/* Enable interrupt for the BMI260 accel/gyro sensor */
-	gpio_enable_interrupt(GPIO_EC_IMU_INT_L);
-}
-DECLARE_HOOK(HOOK_INIT, baseboard_sensors_init, HOOK_PRIO_DEFAULT);
diff --git a/board/volteer/usbc_config.c b/board/volteer/usbc_config.c
deleted file mode 100644
index 0adfe98107..0000000000
--- a/board/volteer/usbc_config.c
+++ /dev/null
@@ -1,388 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Volteer family-specific USB-C configuration */
-#include "common.h"
-#include "cbi_ec_fw_config.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "system.h"
-#include "timer.h"
-#include "usbc_config.h"
-#include "usbc_ppc.h"
-#include "usb_mux.h"
-#include "driver/bc12/pi3usb9201_public.h"
-#include "driver/ppc/sn5s330_public.h"
-#include "driver/ppc/syv682x_public.h"
-#include "driver/retimer/bb_retimer_public.h"
-#include "driver/tcpm/ps8xxx_public.h"
-#include "driver/tcpm/rt1715_public.h"
-#include "driver/tcpm/tusb422_public.h"
-#include "driver/tcpm/tcpci.h"
-
-#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
-
-/* USBC TCPC configuration for USB3 daughter board */
-static const struct tcpc_config_t tcpc_config_p1_usb3 = {
-	.bus_type = EC_BUS_TYPE_I2C,
-	.i2c_info = {
-		.port = I2C_PORT_USB_C1,
-		.addr_flags = PS8751_I2C_ADDR1_FLAGS,
-	},
-	.flags = TCPC_FLAGS_TCPCI_REV2_0 | TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V,
-	.drv = &ps8xxx_tcpm_drv,
-};
-
-/*
- * USB3 DB mux configuration - the top level mux still needs to be set to the
- * virtual_usb_mux_driver so the AP gets notified of mux changes and updates
- * the TCSS configuration on state changes.
- */
-static const struct usb_mux usbc1_usb3_db_retimer = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &tcpci_tcpm_usb_mux_driver,
-	.hpd_update = &ps8xxx_tcpc_update_hpd_status,
-	.next_mux = NULL,
-};
-
-static const struct usb_mux mux_config_p1_usb3_active = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &virtual_usb_mux_driver,
-	.hpd_update = &virtual_hpd_update,
-	.next_mux = &usbc1_usb3_db_retimer,
-};
-
-static const struct usb_mux mux_config_p1_usb3_passive = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &virtual_usb_mux_driver,
-	.hpd_update = &virtual_hpd_update,
-};
-
-/*
- * Set up support for the USB3 daughterboard:
- *   Parade PS8815 TCPC (integrated retimer)
- *   Diodes PI3USB9201 BC 1.2 chip (same as USB4 board)
- *   Silergy SYV682A PPC (same as USB4 board)
- *   Virtual mux with stacked retimer
- */
-static void config_db_usb3_active(void)
-{
-	tcpc_config[USBC_PORT_C1] = tcpc_config_p1_usb3;
-	usb_muxes[USBC_PORT_C1] = mux_config_p1_usb3_active;
-}
-
-/*
- * Set up support for the passive USB3 daughterboard:
- *   TUSB422 TCPC (already the default)
- *   PI3USB9201 BC 1.2 chip (already the default)
- *   Silergy SYV682A PPC (already the default)
- *   Virtual mux without stacked retimer
- */
-
-static void config_db_usb3_passive(void)
-{
-	usb_muxes[USBC_PORT_C1] = mux_config_p1_usb3_passive;
-}
-
-static void config_port_discrete_tcpc(int port)
-{
-	/*
-	 * Support 2 Pin-to-Pin compatible parts: TUSB422 and RT1715, for
-	 * simplicity allow either and decide at runtime which we are using.
-	 * Default to TUSB422, and switch to RT1715 if it is on the I2C bus and
-	 * the VID matches.
-	 */
-
-	int regval;
-
-	if (i2c_read16(port ? I2C_PORT_USB_C1 : I2C_PORT_USB_C0,
-		       RT1715_I2C_ADDR_FLAGS, TCPC_REG_VENDOR_ID,
-		       &regval) == EC_SUCCESS) {
-		if (regval == RT1715_VENDOR_ID) {
-			CPRINTS("C%d: RT1715 detected", port);
-			tcpc_config[port].i2c_info.addr_flags =
-				RT1715_I2C_ADDR_FLAGS;
-			tcpc_config[port].drv = &rt1715_tcpm_drv;
-			return;
-		}
-	}
-	CPRINTS("C%d: Default to TUSB422", port);
-}
-
-static const char *db_type_prefix = "USB DB type: ";
-void config_usb3_db_type(void)
-{
-	enum ec_cfg_usb_db_type usb_db = ec_cfg_usb_db_type();
-
-	config_port_discrete_tcpc(0);
-	switch (usb_db) {
-	case DB_USB_ABSENT:
-		CPRINTS("%sNone", db_type_prefix);
-		break;
-	case DB_USB4_GEN2:
-		config_port_discrete_tcpc(1);
-		CPRINTS("%sUSB4 Gen1/2", db_type_prefix);
-		break;
-	case DB_USB4_GEN3:
-		config_port_discrete_tcpc(1);
-		CPRINTS("%sUSB4 Gen3", db_type_prefix);
-		break;
-	case DB_USB3_ACTIVE:
-		config_db_usb3_active();
-		CPRINTS("%sUSB3 Active", db_type_prefix);
-		break;
-	case DB_USB3_PASSIVE:
-		config_db_usb3_passive();
-		config_port_discrete_tcpc(1);
-		CPRINTS("%sUSB3 Passive", db_type_prefix);
-		break;
-	default:
-		CPRINTS("%sID %d not supported", db_type_prefix, usb_db);
-	}
-}
-
-/******************************************************************************/
-/* USBC PPC configuration */
-struct ppc_config_t ppc_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = SN5S330_ADDR0_FLAGS,
-		.drv = &sn5s330_drv,
-	},
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_USB_C1,
-		.i2c_addr_flags = SYV682X_ADDR0_FLAGS,
-		.frs_en = GPIO_USB_C1_FRS_EN,
-		.drv = &syv682x_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(ppc_chips) == USBC_PORT_COUNT);
-unsigned int ppc_cnt = ARRAY_SIZE(ppc_chips);
-
-/******************************************************************************/
-/* PPC support routines */
-void ppc_interrupt(enum gpio_signal signal)
-{
-	switch (signal) {
-	case GPIO_USB_C0_PPC_INT_ODL:
-		sn5s330_interrupt(USBC_PORT_C0);
-		break;
-	case GPIO_USB_C1_PPC_INT_ODL:
-		syv682x_interrupt(USBC_PORT_C1);
-	default:
-		break;
-	}
-}
-
-/******************************************************************************/
-/* USBC TCPC configuration */
-struct tcpc_config_t tcpc_config[] = {
-	[USBC_PORT_C0] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C0,
-			.addr_flags = TUSB422_I2C_ADDR_FLAGS,
-		},
-		.drv = &tusb422_tcpm_drv,
-	},
-	[USBC_PORT_C1] = {
-		.bus_type = EC_BUS_TYPE_I2C,
-		.i2c_info = {
-			.port = I2C_PORT_USB_C1,
-			.addr_flags = TUSB422_I2C_ADDR_FLAGS,
-		},
-		.drv = &tusb422_tcpm_drv,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT);
-BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT);
-
-/******************************************************************************/
-/* USB-A charging control */
-
-const int usb_port_enable[USB_PORT_COUNT] = {
-	GPIO_EN_PP5000_USBA,
-};
-
-/******************************************************************************/
-/* USBC mux configuration - Tiger Lake includes internal mux */
-struct usb_mux usbc1_tcss_usb_mux = {
-	.usb_port = USBC_PORT_C1,
-	.driver = &virtual_usb_mux_driver,
-	.hpd_update = &virtual_hpd_update,
-};
-
-struct usb_mux usb_muxes[] = {
-	[USBC_PORT_C0] = {
-		.usb_port = USBC_PORT_C0,
-		.driver = &virtual_usb_mux_driver,
-		.hpd_update = &virtual_hpd_update,
-	},
-	[USBC_PORT_C1] = {
-		.usb_port = USBC_PORT_C1,
-		.driver = &bb_usb_retimer,
-		.hpd_update = bb_retimer_hpd_update,
-		.next_mux = &usbc1_tcss_usb_mux,
-		.i2c_port = I2C_PORT_USB_1_MIX,
-		.i2c_addr_flags = USBC_PORT_C1_BB_RETIMER_I2C_ADDR,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT);
-
-struct bb_usb_control bb_controls[] = {
-	[USBC_PORT_C0] = {
-		/* USB-C port 0 doesn't have a retimer */
-	},
-	[USBC_PORT_C1] = {
-		.usb_ls_en_gpio = GPIO_USB_C1_LS_EN,
-		.retimer_rst_gpio = GPIO_USB_C1_RT_RST_ODL,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(bb_controls) == USBC_PORT_COUNT);
-
-__override enum tbt_compat_cable_speed board_get_max_tbt_speed(int port)
-{
-	enum ec_cfg_usb_db_type usb_db = ec_cfg_usb_db_type();
-
-	if (port == USBC_PORT_C1) {
-		if (usb_db == DB_USB4_GEN2) {
-			/*
-			 * Older boards violate 205mm trace length prior
-			 * to connection to the re-timer and only support up
-			 * to GEN2 speeds.
-			 */
-			return TBT_SS_U32_GEN1_GEN2;
-		} else if (usb_db == DB_USB4_GEN3) {
-			return TBT_SS_TBT_GEN3;
-		}
-	}
-
-	/*
-	 * Thunderbolt-compatible mode not supported
-	 *
-	 * TODO (b/147726366): All the USB-C ports need to support same speed.
-	 * Need to fix once USB-C feature set is known for Volteer.
-	 */
-	return TBT_SS_RES_0;
-}
-
-__override bool board_is_tbt_usb4_port(int port)
-{
-	enum ec_cfg_usb_db_type usb_db = ec_cfg_usb_db_type();
-
-	/*
-	 * Volteer reference design only supports TBT & USB4 on port 1
-	 * if the USB4 DB is present.
-	 *
-	 * TODO (b/147732807): All the USB-C ports need to support same
-	 * features. Need to fix once USB-C feature set is known for Volteer.
-	 */
-	return ((port == USBC_PORT_C1)
-		&& ((usb_db == DB_USB4_GEN2) || (usb_db == DB_USB4_GEN3)));
-}
-
-static void ps8815_reset(void)
-{
-	int val;
-
-	gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 0);
-	msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS,
-			   PS8815_PWR_H_RST_H_DELAY_MS));
-	gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 1);
-	msleep(PS8815_FW_INIT_DELAY_MS);
-
-	/*
-	 * b/144397088
-	 * ps8815 firmware 0x01 needs special configuration
-	 */
-
-	CPRINTS("%s: patching ps8815 registers", __func__);
-
-	if (i2c_read8(I2C_PORT_USB_C1,
-		      PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f was %02x", val);
-
-	if (i2c_write8(I2C_PORT_USB_C1,
-		       PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, 0x31) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f set to 0x31");
-
-	if (i2c_read8(I2C_PORT_USB_C1,
-		      PS8751_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS)
-		CPRINTS("ps8815: reg 0x0f now %02x", val);
-}
-
-void board_reset_pd_mcu(void)
-{
-	enum ec_cfg_usb_db_type usb_db = ec_cfg_usb_db_type();
-
-	/* No reset available for TCPC on port 0 */
-	/* Daughterboard specific reset for port 1 */
-	if (usb_db == DB_USB3_ACTIVE) {
-		ps8815_reset();
-		usb_mux_hpd_update(USBC_PORT_C1, USB_PD_MUX_HPD_LVL_DEASSERTED |
-						 USB_PD_MUX_HPD_IRQ_DEASSERTED);
-	}
-}
-
-static void board_tcpc_init(void)
-{
-	/* Don't reset TCPCs after initial reset */
-	if (!system_jumped_late())
-		board_reset_pd_mcu();
-
-	/* Enable PPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL);
-
-	/* Enable TCPC interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL);
-
-	/* Enable BC1.2 interrupts. */
-	gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL);
-	gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL);
-}
-DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_CHIPSET);
-
-/******************************************************************************/
-/* BC1.2 charger detect configuration */
-const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
-	[USBC_PORT_C0] = {
-		.i2c_port = I2C_PORT_USB_C0,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-	[USBC_PORT_C1] = {
-		.i2c_port = I2C_PORT_USB_C1,
-		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
-	},
-};
-BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT);
-
-/******************************************************************************/
-/* TCPC support routines */
-uint16_t tcpc_get_alert_status(void)
-{
-	uint16_t status = 0;
-
-	/*
-	 * Check which port has the ALERT line set
-	 */
-	if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL))
-		status |= PD_STATUS_TCPC_ALERT_0;
-	if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL))
-		status |= PD_STATUS_TCPC_ALERT_1;
-
-	return status;
-}
-
-/******************************************************************************/
-
-int ppc_get_alert_status(int port)
-{
-	if (port == USBC_PORT_C0)
-		return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0;
-	else
-		return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0;
-}
diff --git a/board/volteer/usbc_config.h b/board/volteer/usbc_config.h
deleted file mode 100644
index 55dfce7621..0000000000
--- a/board/volteer/usbc_config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* volteer board-specific USB-C configuration */
-
-#ifndef __CROS_EC_USBC_CONFIG_H
-#define __CROS_EC_USBC_CONFIG_H
-
-enum usbc_port {
-	USBC_PORT_C0 = 0,
-	USBC_PORT_C1,
-	USBC_PORT_COUNT
-};
-
-/* Configure the USB3 daughterboard type */
-void config_usb3_db_type(void);
-
-#endif /* __CROS_EC_USBC_CONFIG_H */
diff --git a/board/volteer/vif_override.xml b/board/volteer/vif_override.xml
deleted file mode 100644
index f871a543e3..0000000000
--- a/board/volteer/vif_override.xml
+++ /dev/null
@@ -1,114 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<VIF xmlns="http://usb.org/VendorInfoFile.xsd">
-  <Model_Part_Number>Volteer RT1715</Model_Part_Number>
-  <Product_Revision>0</Product_Revision>
-  <TID>0</TID>
-  <Product>
-    <!-- Information about TGL USB4 provided by Intel. See b/172963736 -->
-    <USB4_Num_Internal_Host_Controllers value="1" />
-    <USB4_Num_PCIe_DN_Bridges value="0" />
-    <USB4RouterList>
-      <Usb4Router>
-        <USB4_Router_ID value="1" />
-        <USB4_Silicon_VID value="32903">8087</USB4_Silicon_VID>
-        <USB4_Num_Lane_Adapters value="4" />
-        <USB4_Num_USB3_DN_Adapters value="1" />
-        <USB4_Num_DP_IN_Adapters value="1" />
-        <USB4_Num_DP_OUT_Adapters value="0" />
-        <USB4_Num_PCIe_DN_Adapters value="4" />
-        <USB4_TBT3_Not_Supported value="0">TBT3 Compatible</USB4_TBT3_Not_Supported>
-        <USB4_PCIe_Wake_Supported value="true" />
-        <USB4_USB3_Wake_Supported value="false" />
-        <USB4_Num_Unused_Adapters value="0" />
-        <USB4_TBT3_VID value="32903">8087</USB4_TBT3_VID>
-        <USB4_PCIe_Switch_Vendor_ID value="32902">8086</USB4_PCIe_Switch_Vendor_ID>
-        <USB4_PCIe_Switch_Device_ID value="39451">9A1B</USB4_PCIe_Switch_Device_ID>
-      </Usb4Router>
-      <Usb4Router>
-        <USB4_Router_ID value="0" />
-        <USB4_Silicon_VID value="32903">8087</USB4_Silicon_VID>
-        <USB4_Num_Lane_Adapters value="2" />
-        <USB4_Num_USB3_DN_Adapters value="1" />
-        <USB4_Num_DP_IN_Adapters value="0" />
-        <USB4_Num_DP_OUT_Adapters value="0" />
-        <USB4_Num_PCIe_DN_Adapters value="0" />
-        <USB4_TBT3_Not_Supported value="1">Not TBT3-Compatible</USB4_TBT3_Not_Supported>
-        <USB4_PCIe_Wake_Supported value="false" />
-        <USB4_USB3_Wake_Supported value="false" />
-        <USB4_Num_Unused_Adapters value="0" />
-      </Usb4Router>
-    </USB4RouterList>
-  </Product>
-  <Component>
-    <!-- Port 0 is USB3-only. -->
-    <USB4_Supported value="false">NO</USB4_Supported>
-    <Host_Truncates_DP_For_tDHPResponse value="false" />
-    <SrcPdoList>
-      <SrcPDO>
-        <!-- Add in missing fields for SrcPdo0, derived from SYV682B datasheet. -->
-        <Src_PD_OCP_OC_Debounce value="50">50 msec</Src_PD_OCP_OC_Debounce>
-        <Src_PD_OCP_OC_Threshold value="360">3600 mA</Src_PD_OCP_OC_Threshold>
-      </SrcPDO>
-    </SrcPdoList>
-    <DFP_VDO_Port_Number value="0" />
-    <Modal_Operation_Supported_SOP value="false" />
-  </Component>
-  <Component>
-    <USB4_Max_Speed value="1">Gen 3 (40Gb)</USB4_Max_Speed>
-    <USB4_DFP_Supported value="true" />
-    <USB4_UFP_Supported value="false" />
-    <USB4_USB3_Tunneling_Supported value="true" />
-    <USB4_DP_Tunneling_Supported value="true" />
-    <USB4_PCIe_Tunneling_Supported value="true" />
-    <USB4_TBT3_Compatibility_Supported value="true" />
-    <USB4_CL1_State_Supported value="true" />
-    <USB4_CL2_State_Supported value="true" />
-    <USB4_Num_Retimers value="1" />
-    <USB4_DP_Bit_Rate value="3">HBR3</USB4_DP_Bit_Rate>
-    <USB4_Num_DP_Lanes value="4">4 Lanes</USB4_Num_DP_Lanes>
-    <USB4_Lane_0_Adapter value="1" />
-    <Host_Supports_USB_Data value="true" />
-    <Host_Speed value="2">USB 3.2 Gen 2x1</Host_Speed>
-    <Host_Contains_Captive_Retimer value="true" />
-    <Host_Truncates_DP_For_tDHPResponse value="false" />
-    <Host_Suspend_Supported value="true" />
-    <Is_DFP_On_Hub value="false" />
-    <USB_Suspend_May_Be_Cleared value="true" />
-    <FR_Swap_Type_C_Current_Capability_As_Initial_Sink value="3">3A @ 5V</FR_Swap_Type_C_Current_Capability_As_Initial_Sink>
-    <FR_Swap_Supported_As_Initial_Sink value="true" />
-    <SrcPdoList>
-      <SrcPDO>
-        <!-- Add in missing fields for SrcPdo0, derived from SYV682B datasheet. -->
-        <Src_PD_OCP_OC_Debounce value="50">50 msec</Src_PD_OCP_OC_Debounce>
-        <Src_PD_OCP_OC_Threshold value="360">3600 mA</Src_PD_OCP_OC_Threshold>
-      </SrcPDO>
-    </SrcPdoList>
-    <Data_Capable_As_USB_Host_SOP value="true" />
-    <Data_Capable_As_USB_Device_SOP value="false" />
-    <!-- TODO(b/173028252): Figure out the appropriate Discover Identity ACK for
-         Volteer and update the EC and VIF accordingly. -->
-    <Product_Type_UFP_SOP value="3">PSD</Product_Type_UFP_SOP>
-    <Product_Type_DFP_SOP value="4">Alternate Mode Controller (AMC)</Product_Type_DFP_SOP>
-    <DFP_VDO_Port_Number value="1" />
-    <Modal_Operation_Supported_SOP value="true" />
-    <USB_VID_SOP value="6353">18D1</USB_VID_SOP>
-    <bcdDevice_SOP value="0">0000</bcdDevice_SOP>
-    <SVID_Fixed_SOP value="true" />
-    <Num_SVIDs_Min_SOP value="1" />
-    <Num_SVIDs_Max_SOP value="1" />
-    <SOPSVIDList>
-      <SOPSVID>
-        <SVID_SOP value="32903">8087</SVID_SOP>
-        <SVID_Modes_Fixed_SOP value="true" />
-        <SVID_Num_Modes_Min_SOP value="1" />
-        <SVID_Num_Modes_Max_SOP value="1" />
-        <SOPSVIDModeList>
-          <SOPSVIDMode>
-            <SVID_Mode_Enter_SOP value="true" />
-            <SVID_Mode_Recog_Value_SOP value="0">00000000</SVID_Mode_Recog_Value_SOP>
-          </SOPSVIDMode>
-        </SOPSVIDModeList>
-      </SOPSVID>
-    </SOPSVIDList>
-  </Component>
-</VIF>